UD Connect process automization
Hi,
My name is venkat. I am in need to automate the UD Connect process in SAP BI. I am trying to push the data on daily load basis from SQL Server 2005 to SAP BI. I was told to use UD Connect due to some restrictions.
Could you plz let me know how I can automize the UD Connect process. I have a minimum experience configure the RFC destination etc. But that is not enough to go and start the process.
First I wanted to know how the view will be taken it to SAP BI?
Before the view is moving to SAP BI, will the UD Connect converts the view into Flat file and then transfers to SAP BI?
If it converts to flat file, where will it be stored in SAP BI? Is it stores in Application directory of the BI server or something else?
If it not converts into flat file, then how can I automate this process on daily load basis, for this should I write any ABAP program? If yes, please let me know the pseudo code how I can do it?
I am really confusing about the daily load basis.
It would be highly appreciated if you let me know the process.
Best regards
Venkat
Hi
Based on application server connectivity (supported by J2EE conectivity Architecture),Universal Data Integration(UDI) establishes a connection between BI and the J2EE engine of the Application Server( As JAVA ).The so called BI Java Connectors are part of BI UDI,and allow access to a large number of very different datasources.
With UDI ,SAP netweaver offers the option of BI Jva Integration.BI Java Integration enables :
1) data to be extracted from a broader spectrum of source system.
2) access to relational and multidimentional datasources.
3) as well as persistant and transient data staging in BI.
Transient data staging using a virtual provider makes it possible to access external data directly...
Check this Link :
http://help.sap.com/saphelp_nw04/helpdata/EN/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/78/ef1441a509064abee6ffd6f38278fd/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/EN/78/ef1441a509064abee6ffd6f38278fd/content.htm
Hope above link will give you better understandng
Many thanks
Kiran
Similar Messages
-
How to connect processes in Process chain
Hi,
How to connect processes in Process chain.
how to make it as black,green,red.
Thanks,
Madhu.Hi,
u can connect first process in a Process chain to second, just click on first process and drag and drop onto second one.
3 options will appear:
1. succesfull---green line
2. unsuccesfull----red line
3. always-----black.
select one option then linked will be formed.
green line means the second process will be executed if and only if first process ran successfully.
red line means the second process will be executed if and only if first process ran unsuccessfully.
black line means line means the second process will be executed even if first process ran successfully or unsuccesfully.
bye.
"assign points if info. is helpful"
Narendra reddy. -
Monitoring/debug the database connection process
Hi,
I am trying to define a new database connection using the JDBC-ODBC Bridge (trying to connect to a legacy apps), and keep getting an error message from the ODBC driver manager, which work perfectly fine outside the JDev environment.
Is there a way for me to monitor/debug the database connection process, prior to a successful test connection, in order for me to find out exactly where/what the problem is?
Thanks for the help,
Arie.Repost
-
Connection Process times out in Conntrans
Hi guys,
On the laptops when conntrans happens, we see an error as follows:
Connection process timed out. Contact system admin to change timeout value and synchronize again.
everything worked out well in Q, but not in Production.
are there any suggestions?
thanksHi,
Please update the field STR_VALUE of the table SMO5TSVVAL to FFFF.
This should make sure that it never times out.
Best Regards,
Shourav -
Where to include connection processing methods?
In an architecture which uses JSPs as the presentation layer, and contains objects representing each table of an Oracle database (one object per table), should the connection processing be included in the JSPs, or should it be included within the method of each database object that prepares the SQL statement?
By connection processing, I mean methods for establishing the connection, returning a reference to it, and closing it.You should not include that type of logic in the JSP at all! It's usually not clean to do that. You should separate that portion of the code and put them inside the DAO perhaps...
-
Problem in connecting process types APD
Hi All,
I have created an APD to update an infoobject say ZEMP. The source of the APD is the P table of ZEMP and target is the characteristics ZEMP itself. I am doing some processing before i process data to ZEMP. In my APD, I have database table as a source, then followed by a filter process type. I am then doing some processing through ABAP process type. But when I try to connect the ABAP process type to the attribute procees type, the system does not allow me to connect the ABAP process type to Attributes process type. What could be the reason.
Thanks,
SatyaHi,
I had the same problem. Turns out that you see small red triangles (like the 'play' symbol on music applications) on your process types. If you click on that symbol and drag toward your other object, you will see a line appear and you'll be able to assign fields.
Good luck!
Hayo -
RFC connection, process a nested table parameter
We are encountering an issue that we need to use nested table parameter when creating connection between webdynpro and ABAP RFC module.
Heard from somewhere that nested table processing is not well supported at WebDynpro side, will it affect calling performance a lot? Do we have some methods to deal with this kind of parameter?Hi
Well refer this document which will really help you. If you have used a table within a table i dont think it should be a performance problem as long as it is defined as a Table Parameter in the RFC. But anyway refer to this document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/effective web dynpro - adaptive rfc models
That should really help you out. Ensure that you dont give tables in Export or Import parameters.
Go through the document link and that should clear all your doubts.
regards
ravi -
Apple TV 3 will stream music via Home Sharing from iTunes on Mac running 10.6.8 but will not connect to iTunes library to stream movies or podcasts. When trying to connect, iTunes becomes unresponsive and must be forced to quit. ATV will stream movies purchased through the ATV but not those purchased through or ripped/copied onto the Mac. I've tried fixes suggested for similar problems (rebooting ATV and Mac, signing out then back into iTunes Store) to no success. Any suggestions will be appreciated.
This is the most bogus example of Apple rip-off EVER. They do not advertise this *feature* and yet expect people to invest in an Apple ECOSYSTEM? My experience with Apple TV using a central media "server" (a dedicated Mac Mini) has been atrocious. I continually get "Cannot connect..." messages and with typical Apple "it just works" mentality, there is no reason stated. I HATE APPLE TV and I HATE APPLE. Peddle your crapple somewhere else.
-
I do not have a MobileMe account. Yet, when trying to upload photos from iPhoto to FaceBook I get repeated messages, "Difficulty connecting to MobileMe." This is after the rainbow wheel spins for a while. Sometimes I have to force quit iPhoto because iPhoto locks up. This also happens on occasion while I'm working in iPhoto, such as moving between albums or editing features. I use iPhoto '11 with latest updates. How can I resolve this issue?
Hey,
If you've resolved the issue by turning off syncing then no further troubleshooting is needed. Having syncing turned off will prevent you from syncing an iOS device over USB with calendars / contacts. The only time iPhoto talks to MobileMe is if you have a MobileMe account added (as far as I am aware).
If you wish to troubleshoot further:
I checked out my User>Library>Caches and >Preferences. Neither had a >com.apple.iphoto file.
These must exist otherwise iPhoto would not be working at all as they are required for it to launch. Lets try another route to get to the same location.
Click on the Finder icon in the dock (smiley face)
Go to "Go" > "Home" at the top of the computer screen
Double-click "Library"
Double-click "Caches"
Go to "View" > "As List" at the top of the computer screen
-- This list should now be alphabetical...if not click on the column called "Name" to alphabatize
-- Locate a blue folder called "com.apple.iphoto" and remove to the trash
Click on the Finder icon in the dock (smiley face)
Go to "Go" > "Home" at the top of the computer screen
Double-click "Library"
Double-click "Preferences"
Go to "View" > "As List" at the top of the computer screen
-- This list should now be alphabetical...if not click on the column called "Name" to alphabatize
-- Locate the files called "com.apple.iphoto" they will have a variety of endings. As long as they say "com.apple.iphoto" drag them to the trash.
- Restart the computer
If the issue persists I would try with a new iPhoto Library. Hold down option and launch iPhoto and create a new library. Add a picture or two and then test. -
Unable to get update to install
I just figured out a solution. I connected my ipod to my computer, went to the 'info' tab on the menu for my ipod. I checked 'Sync Mail Accounts', which were greyed out until I selected them. That connected me to the Cloud and everything went back to normal. Hope this helps someone else!
-
Best connection process for oracel ADF?
hi all,
i am using oracle jdeveloper 11g 2 release and oracle database 10g. now i used database connecion in choosing Application resource type. i need to know what is the best way for connect with db? is it db connection ,JMX, URL, or WebDAV? because of i am going to make finally enterprise software for large company(4000 users use) .so number of users need to keep their connection because they are in different location. therefore show me what is the best path for keeping connection with oracle db? There is no any web service. so show me is there any connection method, because of timeout can be happen, server has poor connection?
thankx. all the best.dear friend ,
ADF mean it is a framework(Application development framework). which is developed for java developers. earlier in oracle jdeveloper 10g used for development.now jdeveloper 11g has this feature.which is same to oracle forms,but it hasn't rports.it has jsf page(java sever face).jsp mean java server page. in adf both include but jsp is in jspx.java serve page xml.
read these lines:-
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_58/jdtut_11r2_58_1.html
http://www.oracle.com/technetwork/developer-tools/jdev/overview/index-100269.html
http://www.oracle.com/technetwork/developer-tools/adf/overview/index.html
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/june2012-otn-harvest-1683085.pdf -
Difference between connection, session and process
Hi all,
Can anyone please update me on the difference between connection,session and process.
Thanks in advance,
- SriI got this useful note by googled in net. It describes session,connection,process gracefully.
A connection is a physical circuit between you and the database.A connection
might be one of many types -- most popular begin DEDICATED server and SHARED
server. Zero, one or more sessions may be established over a given connection
to the database as show above with sqlplus. A process will be used by a session
to execute statements. Sometimes there is a one to one relationship between
CONNECTION->SESSION->PROCESS (eg: a normal dedicated server connection).
Sometimes there is a one to many from connection to sessions (eg: like
autotrace, one connection, two sessions, one process). A process does not have
to be dedicated to a specific connection or session however, for example when
using shared server (MTS), your SESSION will grab a process from a pool of
processes in order to execute a statement. When the call is over, that process
is released back to the pool of processes. -
Help please! UD connect datasource can not stay in synch with source table
I have been using UD connect to extract data from Sybase table views for 2 years already. As many who have used UD connect know it is very diffcult to get it to work. But I went through all that and at least it has been working fine except sometimes difficulty transporting. And I am aware of all major OSS notes about UD Connect.
However this loading error has been driving me crazy. Almost on a daily basis some data loads would fail with error 'DataSource (datasource name) has to be replicated '.
So I re-generated the datasource and activated infosources, test loaded and it all worked fine. Come next morning it would fail again with the same error.
I talked with DBAs and they swear that no table changes were made overnight. then after it keep happening for several days in a row, I ruled out table change possibilities. Especially when I read this morning the error message:
DataSource (datasource name) does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 2007.05.01 17:40:59.
The time stamp in the BW system is 2007.05.01 17:39:45.
The timestamp is only less than 2 minute apart.
Can anyone give me any pointers?
I now have a production support problem everyday.
Any help is greatly appreciated!
JulianI am in need to automate the UD Connect process in SAP BI. I am trying to push the data on daily load basis from SQL Server 2005 to SAP BI. I was told to use UD Connect due to some restrictions.
Could you plz let me know how I can automize the UD Connect process. I have a minimum experience configure the RFC destination etc. But that is not enough to go and start the process.
First I wanted to know how the view will be taken it to SAP BI?
Before the view is moving to SAP BI, will the UD Connect converts the view into Flat file and then transfers to SAP BI?
If it converts to flat file, where will it be stored in SAP BI? Is it stores in Application directory of the BI server or something else?
If it not converts into flat file, then how can I automate this process on daily load basis, for this should I write any ABAP program? If yes, please let me know the pseudo code how I can do it?
I am really confusing about the daily load basis.
It would be highly appreciated if you let me know the process. -
Can't Connect to Pix 501 VPN on Network
Hi All,
I have a software VPN client that connects just fine to the PIX 501 VPN, but I cannot ping or telnet to any services on the LAN. Below is my config and results of show cry ipsec sa. I would appreciate any suggestions to fix this.
It's been a while since I have done this. When I check the DHCP address received from the VPN, the default gateway is missing. IIRC, that is normal. What is strange is that when I ping, Windows does not show any sent packets.
Thanks,
--Drichards38
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password bgVy005CZTsaMOwR encrypted
passwd bgVy005CZTsaMOwR encrypted
hostname cisco
domain-name xxxxxx.biz
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol ftp 1024-2048
fixup protocol ftp 49152-65534
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list acl-out permit tcp any interface outside eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq telnet
access-list acl_out permit tcp any host aa.bb.cc.dd eq 3389
access-list acl_out permit tcp any host aa.bb.cc.dd eq 60990
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq echo
access-list acl_out permit tcp any host aa.bb.cc.dd eq ftp
access-list acl_out permit tcp any host aa.bb.cc.dd eq https
access-list acl_out permit tcp any interface inside eq www
access-list acl_out permit tcp any interface inside eq ftp
access-list acl_out permit tcp any interface inside eq 3389
access-list acl_out permit tcp any interface inside eq https
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq https
access-list acl_out permit tcp any host aa.bb.cc.dd eq https
access-list acl_out permit tcp any host aa.bb.cc.dd eq 3389
access-list acl_out permit tcp any host aa.bb.cc.dd eq 3389
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq https
access-list acl_out permit tcp any host aa.bb.cc.dd eq 3389
access-list acl_out permit tcp any host aa.bb.cc.dd eq ftp
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq https
access-list acl_out permit tcp any host aa.bb.cc.dd eq 3389
access-list acl_out permit tcp any host aa.bb.cc.dd eq 902
access-list acl_out permit tcp any host aa.bb.cc.dd eq ftp
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq ftp
access-list acl_out permit tcp any host aa.bb.cc.dd eq https
access-list acl_out permit tcp any host aa.bb.cc.dd eq 3389
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq ftp
access-list acl_out permit tcp any host aa.bb.cc.dd eq https
access-list acl_out permit tcp any host aa.bb.cc.dd eq 3389
access-list acl_out permit tcp any host aa.bb.cc.dd eq www
access-list acl_out permit tcp any host aa.bb.cc.dd eq https
access-list acl_out permit tcp any host aa.bb.cc.dd eq ftp
access-list acl_out permit tcp any host aa.bb.cc.dd eq 3389
access-list outside_cryptomap_dyn_20 permit ip any 10.0.0.0 255.0.0.0
access-list split_tunnel_acl permit ip 10.0.0.0 255.0.0.0 any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside aa.bb.cc.dd 255.255.255.240
ip address inside 192.168.93.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool low_vpn_pool 10.0.1.205-10.0.1.210
pdm location 172.16.0.0 255.255.0.0 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 192.168.93.0 255.255.255.0 0 0
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.67 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.68 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.69 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.70 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.71 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.72 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.73 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.74 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.75 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.76 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.77 netmask 255.255.255.255 0 0
static (inside,outside) aa.bb.cc.dd 192.168.93.78 netmask 255.255.255.255 0 0
access-group acl_out in interface outside
rip inside default version 1
route outside 0.0.0.0 0.0.0.0 aa.bb.cc.dd 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa authorization command LOCAL
http server enable
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map client authentication LOCAL
crypto map outside_map interface outside
isakmp enable outside
isakmp nat-traversal 20
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup MY_VPN address-pool low_vpn_pool
vpngroup MY_VPN dns-server 4.2.2.1
vpngroup MY_VPN default-domain xxxxx.biz
vpngroup MY_VPN split-tunnel split_tunnel_acl
vpngroup MY_VPN idle-time 1800
vpngroup MY_VPN password ********
telnet 0.0.0.0 255.255.255.255 outside
telnet 192.168.93.0 255.255.255.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 60
console timeout 0
dhcpd address 192.168.93.230-192.168.93.240 inside
dhcpd dns ff.gg.hh.ii ff.gg.hh.ii
dhcpd lease 65536
dhcpd ping_timeout 750
dhcpd domain xxxxxx.biz
dhcpd auto_config outside
dhcpd enable inside
username xxxx password xxxxxxx encrypted privilege 15
cisco(config)# show cry ipsec sa
interface: outside
Crypto map tag: outside_map, local addr. aa.bb.cc.dd
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (10.0.1.205/255.255.255.255/0/0)
current_peer: jj.kk.ll.mm:1265
dynamic allocated peer ip: 10.0.1.205
PERMIT, flags={transport_parent,}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest 0
#pkts decaps: 38, #pkts decrypt: 38, #pkts verify 38
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
local crypto endpt.: aa.bb.cc.dd, remote crypto endpt.: 97.93.95.133
path mtu 1500, ipsec overhead 64, media mtu 1500
current outbound spi: 3a898e67
inbound esp sas:
spi: 0xeeb64931(4004923697)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
slot: 0, conn id: 1, crypto map: outside_map
sa timing: remaining key lifetime (k/sec): (4607993/28610)
IV size: 8 bytes
replay detection support: Y
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x3a898e67(982093415)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
slot: 0, conn id: 2, crypto map: outside_map
sa timing: remaining key lifetime (k/sec): (4608000/28574)
IV size: 8 bytes
replay detection support: Y
outbound ah sas:
outbound pcp sas:I just set the logging to high on all areas of the Cisco VPN client. Below is the resulting log. Everything looks ok from here:
Cisco Systems VPN Client Version 5.0.03.0530
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 3
29 09:57:02.887 09/03/12 Sev=Info/4 CM/0x63100002
Begin connection process
30 09:57:02.897 09/03/12 Sev=Info/4 CM/0x63100004
Establish secure connection
31 09:57:02.897 09/03/12 Sev=Info/4 CM/0x63100024
Attempt connection with server "a.b.c.d"
32 09:57:02.907 09/03/12 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with a.b.c.d.
33 09:57:02.917 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to a.b.c.d
34 09:57:03.228 09/03/12 Sev=Info/4 IPSEC/0x63700008
IPSec driver successfully started
35 09:57:03.228 09/03/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
36 09:57:03.228 09/03/12 Sev=Info/6 IPSEC/0x6370002C
Sent 47 packets, 0 were fragmented.
37 09:57:03.979 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
38 09:57:03.979 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, VID(Xauth), VID(dpd), VID(Unity), VID(?), KE, ID, NON, VID(?), VID(Nat-T), NAT-D, NAT-D, HASH) from a.b.c.d
39 09:57:04.039 09/03/12 Sev=Info/6 GUI/0x63B00012
Authentication request attributes is 6h.
40 09:57:03.979 09/03/12 Sev=Info/5 IKE/0x63000001
Peer supports XAUTH
41 09:57:03.979 09/03/12 Sev=Info/5 IKE/0x63000001
Peer supports DPD
42 09:57:03.979 09/03/12 Sev=Info/5 IKE/0x63000001
Peer is a Cisco-Unity compliant peer
43 09:57:03.979 09/03/12 Sev=Info/5 IKE/0x63000082
Received IOS Vendor ID with unknown capabilities flag 0x000000A5
44 09:57:03.979 09/03/12 Sev=Info/5 IKE/0x63000001
Peer supports NAT-T
45 09:57:03.999 09/03/12 Sev=Info/6 IKE/0x63000001
IOS Vendor ID Contruction successful
46 09:57:03.999 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, NAT-D, NAT-D, VID(?), VID(Unity)) to a.b.c.d
47 09:57:03.999 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
48 09:57:03.999 09/03/12 Sev=Info/4 IKE/0x63000083
IKE Port in use - Local Port = 0x0421, Remote Port = 0x1194
49 09:57:03.999 09/03/12 Sev=Info/5 IKE/0x63000072
Automatic NAT Detection Status:
Remote end is NOT behind a NAT device
This end IS behind a NAT device
50 09:57:03.999 09/03/12 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
51 09:57:04.029 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
52 09:57:04.029 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_INITIAL_CONTACT) from a.b.c.d
53 09:57:04.029 09/03/12 Sev=Warning/2 IKE/0xA3000067
Received Unexpected InitialContact Notify (PLMgrNotify:886)
54 09:57:04.039 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
55 09:57:04.039 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from a.b.c.d
56 09:57:04.039 09/03/12 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 86400 seconds
57 09:57:04.039 09/03/12 Sev=Info/5 IKE/0x63000047
This SA has already been alive for 2 seconds, setting expiry to 86398 seconds from now
58 09:57:04.039 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
59 09:57:04.039 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from a.b.c.d
60 09:57:04.039 09/03/12 Sev=Info/4 CM/0x63100015
Launch xAuth application
61 09:57:09.327 09/03/12 Sev=Info/4 CM/0x63100017
xAuth application returned
62 09:57:09.327 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to a.b.c.d
63 09:57:09.367 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
64 09:57:09.367 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from a.b.c.d
65 09:57:09.367 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to a.b.c.d
66 09:57:09.367 09/03/12 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
67 09:57:09.387 09/03/12 Sev=Info/5 IKE/0x6300005E
Client sending a firewall request to concentrator
68 09:57:09.387 09/03/12 Sev=Info/5 IKE/0x6300005D
Firewall Policy: Product=Cisco Systems Integrated Client Firewall, Capability= (Centralized Protection Policy).
69 09:57:09.387 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to a.b.c.d
70 09:57:09.427 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
71 09:57:09.427 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from a.b.c.d
72 09:57:09.427 09/03/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.0.1.205
73 09:57:09.427 09/03/12 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(1): , value = 4.2.2.1
74 09:57:09.427 09/03/12 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = xxxx.biz
75 09:57:09.427 09/03/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001
76 09:57:09.427 09/03/12 Sev=Info/5 IKE/0x6300000F
SPLIT_NET #1
subnet = 10.0.0.0
mask = 255.0.0.0
protocol = 0
src port = 0
dest port=0
77 09:57:09.427 09/03/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS: , value = 0x00000000
78 09:57:09.427 09/03/12 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = Received and using NAT-T port number , value = 0x00001194
79 09:57:09.427 09/03/12 Sev=Info/4 CM/0x63100019
Mode Config data received
80 09:57:09.427 09/03/12 Sev=Info/4 IKE/0x63000056
Received a key request from Driver: Local IP = 10.0.1.205, GW IP = a.b.c.d, Remote IP = 0.0.0.0
81 09:57:09.437 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to a.b.c.d
82 09:57:09.477 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
83 09:57:09.477 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, ID, ID, NOTIFY:STATUS_RESP_LIFETIME) from a.b.c.d
84 09:57:09.477 09/03/12 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 28800 seconds
85 09:57:09.477 09/03/12 Sev=Info/5 IKE/0x63000046
RESPONDER-LIFETIME notify has value of 4608000 kb
86 09:57:09.477 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH) to a.b.c.d
87 09:57:09.477 09/03/12 Sev=Info/5 IKE/0x63000059
Loading IPsec SA (MsgID=D70550E6 OUTBOUND SPI = 0xB335C6DA INBOUND SPI = 0xE99E1A59)
88 09:57:09.477 09/03/12 Sev=Info/5 IKE/0x63000025
Loaded OUTBOUND ESP SPI: 0xB335C6DA
89 09:57:09.477 09/03/12 Sev=Info/5 IKE/0x63000026
Loaded INBOUND ESP SPI: 0xE99E1A59
90 09:57:09.527 09/03/12 Sev=Info/5 CVPND/0x63400013
Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 172.16.0.1 172.16.0.11 25
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
172.16.0.0 255.255.0.0 172.16.0.11 172.16.0.11 25
172.16.0.11 255.255.255.255 127.0.0.1 127.0.0.1 25
172.16.255.255 255.255.255.255 172.16.0.11 172.16.0.11 25
224.0.0.0 240.0.0.0 172.16.0.11 172.16.0.11 25
255.255.255.255 255.255.255.255 172.16.0.11 0.0.0.0 1
255.255.255.255 255.255.255.255 172.16.0.11 172.16.0.11 1
91 09:57:10.448 09/03/12 Sev=Info/4 CM/0x63100034
The Virtual Adapter was enabled:
IP=10.0.1.205/255.0.0.0
DNS=4.2.2.1,0.0.0.0
WINS=0.0.0.0,0.0.0.0
Domain=xxxx.biz
Split DNS Names=
92 09:57:10.458 09/03/12 Sev=Info/5 CVPND/0x63400013
Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 172.16.0.1 172.16.0.11 25
10.0.0.0 255.0.0.0 10.0.1.205 10.0.1.205 25
10.0.1.205 255.255.255.255 127.0.0.1 127.0.0.1 25
10.255.255.255 255.255.255.255 10.0.1.205 10.0.1.205 25
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
172.16.0.0 255.255.0.0 172.16.0.11 172.16.0.11 25
172.16.0.11 255.255.255.255 127.0.0.1 127.0.0.1 25
172.16.255.255 255.255.255.255 172.16.0.11 172.16.0.11 25
224.0.0.0 240.0.0.0 10.0.1.205 10.0.1.205 25
224.0.0.0 240.0.0.0 172.16.0.11 172.16.0.11 25
255.255.255.255 255.255.255.255 10.0.1.205 0.0.0.0 1
255.255.255.255 255.255.255.255 10.0.1.205 10.0.1.205 1
255.255.255.255 255.255.255.255 172.16.0.11 172.16.0.11 1
93 09:57:10.458 09/03/12 Sev=Info/4 CM/0x63100038
Successfully saved route changes to file.
94 09:57:10.458 09/03/12 Sev=Info/5 CVPND/0x63400013
Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 172.16.0.1 172.16.0.11 25
10.0.0.0 255.0.0.0 10.0.1.205 10.0.1.205 1
10.0.1.205 255.255.255.255 127.0.0.1 127.0.0.1 25
10.255.255.255 255.255.255.255 10.0.1.205 10.0.1.205 25
a.b.c.d 255.255.255.255 172.16.0.1 172.16.0.11 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
172.16.0.0 255.255.0.0 172.16.0.11 172.16.0.11 25
172.16.0.1 255.255.255.255 172.16.0.11 172.16.0.11 1
172.16.0.11 255.255.255.255 127.0.0.1 127.0.0.1 25
172.16.255.255 255.255.255.255 172.16.0.11 172.16.0.11 25
224.0.0.0 240.0.0.0 10.0.1.205 10.0.1.205 25
224.0.0.0 240.0.0.0 172.16.0.11 172.16.0.11 25
255.255.255.255 255.255.255.255 10.0.1.205 0.0.0.0 1
255.255.255.255 255.255.255.255 10.0.1.205 10.0.1.205 1
255.255.255.255 255.255.255.255 172.16.0.11 172.16.0.11 1
95 09:57:10.458 09/03/12 Sev=Info/6 CM/0x63100036
The routing table was updated for the Virtual Adapter
96 09:57:10.508 09/03/12 Sev=Info/4 CM/0x6310001A
One secure connection established
97 09:57:10.618 09/03/12 Sev=Info/4 CM/0x6310003B
Address watch added for 172.16.0.11. Current hostname: toughone, Current address(es): 10.0.1.205, 172.16.0.11.
98 09:57:10.638 09/03/12 Sev=Info/4 CM/0x6310003B
Address watch added for 10.0.1.205. Current hostname: toughone, Current address(es): 10.0.1.205, 172.16.0.11.
99 09:57:10.638 09/03/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
100 09:57:10.638 09/03/12 Sev=Info/4 IPSEC/0x63700010
Created a new key structure
101 09:57:10.638 09/03/12 Sev=Info/4 IPSEC/0x6370000F
Added key with SPI=0xdac635b3 into key list
102 09:57:10.638 09/03/12 Sev=Info/4 IPSEC/0x63700010
Created a new key structure
103 09:57:10.638 09/03/12 Sev=Info/4 IPSEC/0x6370000F
Added key with SPI=0x591a9ee9 into key list
104 09:57:10.638 09/03/12 Sev=Info/4 IPSEC/0x6370002F
Assigned VA private interface addr 10.0.1.205
105 09:57:10.638 09/03/12 Sev=Info/4 IPSEC/0x63700037
Configure public interface: 172.16.0.11. SG: a.b.c.d
106 09:57:10.638 09/03/12 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 1.
107 09:57:19.741 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to a.b.c.d
108 09:57:19.741 09/03/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to a.b.c.d, our seq# = 3951445672
109 09:57:19.772 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
110 09:57:19.772 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from a.b.c.d
111 09:57:19.772 09/03/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from a.b.c.d, seq# received = 3951445672, seq# expected = 3951445672
112 09:57:30.257 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to a.b.c.d
113 09:57:30.257 09/03/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to a.b.c.d, our seq# = 3951445673
114 09:57:30.297 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
115 09:57:30.297 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from a.b.c.d
116 09:57:30.297 09/03/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from a.b.c.d, seq# received = 3951445673, seq# expected = 3951445673
117 09:57:40.772 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to a.b.c.d
118 09:57:40.772 09/03/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to a.b.c.d, our seq# = 3951445674
119 09:57:40.802 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
120 09:57:40.802 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from a.b.c.d
121 09:57:40.802 09/03/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from a.b.c.d, seq# received = 3951445674, seq# expected = 3951445674
122 09:57:54.291 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
123 09:58:04.306 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
124 09:58:14.320 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
125 09:58:24.334 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
126 09:58:34.349 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
127 09:58:41.359 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to a.b.c.d
128 09:58:41.359 09/03/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to a.b.c.d, our seq# = 3951445675
129 09:58:41.389 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
130 09:58:41.389 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from a.b.c.d
131 09:58:41.389 09/03/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from a.b.c.d, seq# received = 3951445675, seq# expected = 3951445675
132 09:58:54.378 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
133 09:59:04.392 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
134 09:59:14.406 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
135 09:59:24.421 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
136 09:59:34.435 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
137 09:59:41.946 09/03/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to a.b.c.d
138 09:59:41.946 09/03/12 Sev=Info/6 IKE/0x6300003D
Sending DPD request to a.b.c.d, our seq# = 3951445676
139 09:59:41.976 09/03/12 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = a.b.c.d
140 09:59:41.976 09/03/12 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from a.b.c.d
141 09:59:41.976 09/03/12 Sev=Info/5 IKE/0x63000040
Received DPD ACK from a.b.c.d, seq# received = 3951445676, seq# expected = 3951445676
142 09:59:54.464 09/03/12 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA -
Unable to close metadata jco connection
Hi Experts,
when checking the JCo Connection Pools in Web Dynpro Console, I found that all MetaData JCo are in use and unable to disconnect automatically.
the following is metadata jco destination setting
Maximal Pool Size 1
Maximum Connections 5
Connection Timeout 60
Maximum Wait Time 10
how can i do to close these jco connection?Hi Sidney,
I dont really understand why you want to remove the Jco connections. If you click on the "Remove" button as posted earlier by someone, it will completely remove your Jco configurations and you have to create them again on your own. SO, dont do that.
If you want to disconnect the Jco connection in webdynpro java, we can do that by using the following piece of code at the end of the connection process.
As far as I know, by default the Jco connections gets disconnected after certain time limit. Because, I never had to disconnect the Jco whenever I used one.
wdContext.currentModelElement().modelObject().modelInstance().disconnectIfAlive()
Regards,
Gopal.
Maybe you are looking for
-
Opening web pages from address/url bar in new tabs
The primary reason I use Firefox instead of Safari is that I can enter a url in the address bar and the corresponding page will open in a new, foregrounded tab. I seem not to be able to do this in Safari, and neither the Saft nor the Safari Extender
-
Safari 5.1.2 crashing after opening
Any recommendations? Here is the readout: Process: Safari [2135] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.1.2 (6534.52.7) Build Info: WebBrowser-75345207~2 Code Type: X86-64 (Nati
-
I am putting exit condition in before and after my business logic, so it make any difference BEGIN FOR REC IN 1..10 LOOP EXIT WHEN REC =5; business logic END LOOP; END; BEGIN FOR REC IN 1..10 LOOP
-
How do you make the open window as big as the screen?
When I open a window in safari it does not take up the whole screen. I have tried to maximize yet I still see the desktop in the background. How can I make the current window take up the whole screen?
-
I am contemplating Resetting my phone to hopefully solve a very minor problem. I am hesitant to do so though, because my iPhone has worked like a charm so far and I am feeling a little paranoid. My question is: has anyone reset their phone and encoun