UDCONNECT - DTP no data available

Hello Experts,
I am using UDCONNECT to pull data from SQL Legacy Data Warehouse. Created
DTP with date filter for data that I know exists. The PSA gets populated with data by running INFOPACKAGE. But when executing the DTP appears not to be pulling any data (status is green with NO DATA AVAILABLE) and therefore no data loaded to DSO. Need to know if I am missing a setting.
I am new to SAP, 7.0 and UDCONNECT --- any debugging tips would be greatly appreciated.
Thanks!
Edited by: Marissa Baylon on May 14, 2008 2:26 AM

It is my understanding that if I run the INFOPACKAGE it will populate the PSA. I ran the INFOPACKAGE by itself and let it run for a while. Unfortunately, I did not see a way of filtering for the INFOPACKAGE. I am hitting a SQL table of 28 million records. I would let the INFOPACKAGE run then stop it after 15 minutes. Then, I would look at the PSA and it shows me the data. Might not be the best practice but that is the only one I know to check if the PSA gets populated.
I would then run the DTP (full load) and let it run with a filter by batch date. That is when it comes back with NO DATA.
Thanks,
Marissa

Similar Messages

DTP to load master data, gives the message 'No more data available'.

hi,
when i execute the DTP to load master data from DSO, it executes and gives the message 'No more data available'. The request is green but no data is transferred from the DSO to master data.
I want the DSO data to get into master data how do i do it?

Hi Hardik,
Since the request is green, there is no error in extraction. But, as they've rightly pointed out, the Update mode of the DTP must be Delta and there must not be any new Master data that you are looking for.
Compare the data and check if the Delta DTP should bring anything at all i.e. new records. If there are no new records, then the Delta DTP will not bring any more data. Else, change mode to Full and check again.
Reg,
Dhaval

SQL Report not showing data - available in SQL Workshop and SQL Developer

I am having an issue with developing a SQL Report in APEX 3.2.1. I run the code in both SQL developer and SQL Workshop and I get data pulled back (both against my development environment). When I run the same code in a SQL Report region, it returns no data available. Does anyone have any idea what would be causing this? Other regions on the page accessing different tables in the same schema return data without issue. Any help would be appreciated.
Thanks
Freddie

Could you explain the last comment a bit more. Here is a bit more info just in case I touch on the info with it. The db schema is BPAMGR, the Workspace is BPAMGR. We use the same schema for all of our reporting. All of our tables are in the same schema. We don't use any tables outside of this schema. Our APEX workspace has been associated to only this schema. The tables are able to be queried by SQL Workshop in the same APEX instance that the report application is under.
Freddie

No system load data available in st03

Dear Guru,
When i am executing Tcode ST03 it is showing that "No system load data available"
when i am executing "RSSTAT83" report then its thriwing "LOGDB_SSCR_NOT_FOUND" dump.
statndard job getting cancelled thats why i hae change the status of all standard btc jobs.
but system is still too much slow. Right now there is no job running.my patch level is also 14 of both abap & basis.
What to do......

Hi Gaurav
this kind of error belongs to In correct time Zones, OS Time and R/3 Time was different, please set both time zones same in all clients using STZAC Tcode
again if not slove your problem then fallow this procedure.
It is possible that the workload collector is not schedule. To schedule the collector, choose, in Expert user mode, Collector -> Perf. Monitor Collector -> Execution Times in the left subscreen. The system displays the Contents of table TCOLL screen. Ensure that the report RSSTAT83 is scheduled hourly.
if not scheduled hourly, then execute aboue report in SE38
Regards
Bandla

How to hide the report "No data available" message

Hi,
When there are no results from a query execution I would like to hide or at least replace by 0 the "No data available" message.
I'm working on BI 7 and the query is included in a web template that has a button to export to excel and the objective is that this message doesn't appear in the exported file.
Do you know if this is possible? If yes please tell me how to do it.
Regards,
Ana

Hi,
Thanks for your answer.
I will explain my issue a little bit further.
I'm working in BI 7 and I create a web template that contains five queries and a button to export all the queries results to an excel file.
So when executing the query in the portal, depending on the selection criteria inserted some of the queries show the message "No data available" and using the button to export to excel the generated file include that message too. It would be preferable to delete the message in the web and in the excel file, but we need to replace at least in the excel file.
I don't know if this is possible with some script so if you have some export script example please post it here.
If there is some way that when no records exists return zero I think that with a formula I can hide the result but I don't know how to get the 0 value....
If you can help in some way I would be very grateful.
Regards,
Ana

Oracle 9i Database -- Performance window in Grid Control not data available

Hi
I have Grid Control 10.2.0.4 on Red Hat and i monitoring some Oracle 9i Instances. When i go to any of these instances to the Performance section, at begininig , ever, not data available in all the graphics.
When i select manual refresh the graphic begin to build information. But if i close the explorer and reopen , all graphics not have any information.
Is the situation normal for all Oracle 9i databases?
The explanation is that Oracle 9i not have AWR ?
Thanks

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

XMP Data available only with Photoshop CS6

Hi,
We are using an image vault to manage our pictures and i made an InDesign JavaScript to retreive images description contained within the XMP datas.
The text entered in the image bank is good in the browser.
When i open the image in Photoshop CS6 (and older), the XMP data shown is good.
When i open the image in others application (Bridge, PSD CC or my InDesign Script), only the old data is showing (prior to the image bank text update).
To make the good XMP data available to all application, i must open the image in CS6, make a "save as" and then the good XMP is showing through all the application. With an image bank of over 30000 images, this is hardly a solution.
This is what the header looks like when exporting the XMP datas)
Header when exporting XMP from PSD CS6 before the save as (showing the old schema)
Header when exporting XMP from PSD CS6 after the save as (the old schema isn't there anymore and "TC_GENERIC" is now showing)
Any pointers to what i should do to make this right?
Thanks

In the meanwhile I detected the problem. I made a new user account in windows and now it works correctly. So it isn't a photoshop problem but probably a register error. I have to find out furtherThanks for your reaction.
[ excessive quoting removed by admin ]

Data availability report in SAP BI

Hi All,
I need to create a report on "Data Availability" using standard Infocube from SAP BI statistics. For the same i would like to know
The Infocube (From BI statistics) which will provide how much data got into the cube
The Infocube (From BI statistics) which will provide date and time duration taken for data load.

Hi Akash,
The below standard queries will provide you the required details,
Info
Provider
Bex Query
Technical Name
Bex Query
description
0TCT_MC11
0TCT_MC11_Q0140
InfoCube Status
0TCT_MC11
0TCT_MC11_Q0141
InfoCube
Correctness
0TCT_MC11
0TCT_MC11_Q0240
InfoCube Status: Analysis
0TCT_MC22
ZCS_CUBE_DATADETAIL_STAT
ZCS_CUBE_DATADETAIL_STAT
0TCT_MC21
ZTCT_MC21_Q_FB_01
Dashboard - process
chain historical loading time
0TCT_MC22
ZCS_STAT_SPEND_LOADS
Statistics Spend
Overview Loads
0TCT_MC22
ZCS_STAT_SPEND_LOADS_PERF
Statistics Spend
Overview Loads Performance
0TCT_MC22
ZTCT_MC22_Q_FB_02
Dashboard - DSO
loading time top 10
0TCT_MC22
ZTCT_MC22_Q_FB_04
Dashboard - IC
loading time top 10
0TCT_MC22
ZTCT_MC22_Q_FB_06
Dashboard - IO
loading time top 10
-Arun.M.D

Info IDoc received with status 8 in BI but Data available in source system

Hello Experts,
I am loading Budget Period (attributes) into PSA in BI.
Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
Data source: 0PU_BDGTID_ATTR
This is full load.
I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Already looked this thread and googled also.
Re: IDoc received with status 8.
Check points:
sm58 - NO issue
BD87 in ECC (RSINFO Idoc status: 03) -sucessful
BD87 in BI (RSINFO Idoc status : 53)
ST22 - NO issue
sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
I am not sure if I am missing any thing.
Thanks
Rana

Hi all,
I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
RS3 (R/3) - > 0 data
ST22 -> no short dump
WE05 (Idoc) - > everything is ok
I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
Any ideas?
Thanks
jak

SSRS 2008: how to show an empty chart with legend and x and y axis when no data available

Hi,
I am using SSRS 2008, I generated one chart in report designer with the data from Analysis Services (Cube).
According to the dataset, there is no data returned when I run the query. so when I preview the chart, there is nothing but "no data available" showing on the chart.
Here I want to know is there any possible to show an empty chart with legend and x and y axis?
If it is possible, can you tell me how can I make it?
Best Regards.
Connie Zhu

Hi,
When there is no data, the chart displays the message "no data available". But using a little work around, you can display an empty chart.
Please find the below steps given to achieve this
1. Create a new dataset using TSQL to return 1 row of data having the category field and value field set to 0. Add the fields that are necessary for the category fields, series fields and datafields.
   A simple example would be like
   SELECT 'abc' as Category, 0 as Amount
2. Add a new chart, set the category field to 'Category' and set the data field to Amount from above dataset created in step 1.
3. In the new chart, right click the category axis and select axis properties, Click on the labels tab, check on
'Hide axis labels' and then click ok
4. Now set the Visibility property of both the charts depending on the rows returned from your main dataset
   a. click on your main chart and set its Hidden property to :
=iif(CountRows("MainDataSet"),false,true)
   b. click on the new blank chart added and set its Hidden proprety to (the opposite) :
=iif(CountRows("MainDataSet"),true,false)
   Note : Please change the dataset name in above expression "MainDataset" to the name of your chart's dataset
5. Resize the new chart to the same size as your main chart, then position the new chart on the place as the main chart.
   (Note : You can set the position of new chart to be same by copying the location property from the main chart)
6. Now run and observe the result. When there are no rows returned by your main dataset, the new chart (the blank chart) should be displayed.
I've added a working sample of this kind of a report
here.
Hope this helps. Please feel free to discuss if you have any questions.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

Flash chart - Error - No chart data available

Hi
I have a Flash chart that shows the message "Error - No chart data available" (not the no data found message).
If I run its query in sql*plus (using the same parameters) I get 4 rows (with url, label and value columns). I am clueless about how to start investigating this as the chart does not show any other information... Any advice?
What does that message mean? Obviously is something different from no data found?
Thanks
Luis

Hi Marco
Thanks for the reply. I did what you said and found out the problem:
chart Flash Chart error: ORA-20001: get_data error: ORA-20001: Fetch error: ORA-01843: not a valid monthThis was caused because I used the following construction:
where date_from = :p5_date_fromIf this was a report, this would run fine as I set the date format mask using a application level process. However, as Flash charts use separate database connections, they ignore that setting (btw I posted a message about this problem).
I fixed it hardcoding a format mask in my SQL. Not nice but it works!
Thanks
Luis

RFC PROBLEM:NO DATA AVAILABLE IN ST03N

Hi experts,
On the t-code ST03 when i enter lastminute's load and confirm, getting the error RFC Problem:No data available.
How to go ahead.
From
Deepak Keesara.

Hi Deepak,
First thing you can check that job SAP_COLLECTOR_FOR_PERFMONITOR is runningby t-code sm37.
This job runs in client 000 under user ddic with periodic of one hour.
If not schedule it in t-code sm36
Login as user ddic to client 000 ,execute t-code sm36 give the job name SAP_COLLECTOR_FOR_PERFMONITOR, give abap program RSCOLL00 AND GIVE PIRIODIC VALUE ONE HOUR THEN SAVE AND RELEASE.
Regards
Ashok
Edited by: Ashok Dalai on Aug 18, 2008 1:20 PM

TS3276 Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have

Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.

Brightbleu wrote:
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Winmail.data are not usable files. They just preserve RTF within the message.
http://support.microsoft.com/kb/278061
Cheers
Pete

Lms 4.1 prime psirt/eox no data available in the report

Hi:
I´m running LMS 4.1 Prime for Windows.
I tried an immediate report with PSIRT/EOX Report option: Cisco.com
The job succeeded, but without any data in the report
<TABLE style="WIDTH: 100%" border=0 cellSpacing=2 cellPadding=2 align=right mcestyle="width: 100%;">
No data available in the report. The problem could be any one of the following:
<TD style="COLOR: #686868" bgColor=#ffffff height=24 vAlign=top align=left mcestyle="color: #686868;">1. No PSIRT data available in the LMS database for the selected device(s).
2. PSIRT/EOX system job might not have run, or might have failed.
3. You might have entered the wrong cisco.com credentials.
Then I tried logging to Cisco.com (with the same user/password as configured in LMS) and download the PSIRT_EOX_OFFLINE.zip file.
I unzipped it and put it in the folder C:/PROGRA~1/CSCOpx/files/rme/jobs/inventory/reports/EOX_PSIRT/local_xml (please read \ instead of /, because it is wrong in the LMS display).
I set SIRT/EOX Report option: local
And again, the job succeeded, but without any data in the report (same message as before)
What do you think is happening? How could I debug the process?
Thanks a lot
Julio
PD: I`m selecting old devices to be sure that they already had an EOL/EOS.

Sorry, the copy/paste didn´t work as expected, here it is again:
Hi:
I´m running LMS 4.1 Prime for Windows.
I tried an immediate report with PSIRT/EOX Report option: Cisco.com
The job succeeded, but without any data in the report
No data available in the report. The problem could be any one of the following:
1. No PSIRT data available in the LMS database for the selected device(s).
2. PSIRT/EOX system job might not have run, or might have failed.
3. You might have entered the wrong cisco.com credentials.
Then I tried logging to Cisco.com (with the same user/password as configured in LMS) and download the PSIRT_EOX_OFFLINE.zip file.
I unzipped it and put it in the folder C:/PROGRA~1/CSCOpx/files/rme/jobs/inventory/reports/EOX_PSIRT/local_xml (please read \ instead of /, because it is wrong in the LMS display).
I set SIRT/EOX Report option: local
And again, the job succeeded, but without any data in the report (same message as before)
What do you think is happening? How could I debug the process?
Thanks a lot
Julio
PD: I`m selecting old devices to be sure that they already had an EOL/EOS.

Importing vinvl albums via garage band have to import tunes individually .tunes willnot recombine into one album. I understand that it is because data available on cd's is not present on vinyl..any clues on how to fix this?

mac version 10.9.4.
importing vinyl albums via garage band. Have to import tunes individually as tunes will not retain individusl otherwise. trouble is they will not rejoin as one album in iTunes.I understand it is because data available on cd's is not on vinyl imports . Any clues on how to fix this?

"Have to import tunes individually as tunes will not retain individusl otherwise." -- I don't understand this sentence.
iTunes will not assign track names to items imported from vinyl. You will have to label the files yourself in the Get Info window. As long as you give all the tracks on an album the same album information and the same artist information they should group together. if the artists differ then you need to give all the tracks one common album artist (often "Various Artists")in addition to individual track artist.

UDCONNECT - DTP no data available

Similar Messages

Maybe you are looking for