Udev-183-2 breaks X
Sorry - the logfile is gone so I can't post the exact error. However, upgraded udev to 183-2 today and X fails to start. A check of the logs showed that a udev library was not found (can't remember which one). Downgraded udev back to 182-4 and all is well.
Unfortunately, I tested with startx after downgrading, and then rebooted, so Xorg-0-log and .old have been overwritten (as has Xorg-1)
via Google I can't find anything. Are there any changes I need to be aware of?
Roken wrote:
OK, after pacman telling me now that it was going to dump udev and replace it with systemd-tools I let it go ahead, and immediately had the same problem with libudev.so.0 (so.1 now gets put there with systemd-tools). This time I just reversed my previous fix, making a link from libudev.so to libudev.so.0 and tried again. This time X starts properly, and mounting removable drives, phone etc. all seem to work just fine. No obvious problems as yet.
It does seem that those of us tied to xorg111 will hit more problems in the future though. I wish they'd fix catalyst to work with xorg1.12 PDQ.
That's more a problem of unsupported repo's not keeping up with official repo's.
Similar Messages
-
Udev 084-4 breaks something in hal...
...at least in both my machines running Arch.
First of all let me thank everyone involved in making Arch the greatest distro EVER!
Now, let's go on with some details about the problem I'm experiencing:
after the last pacman -Syu (which contained the new archck kernel, udev 084-4 and some other things) on my main machine i noticed that my dbus + hal + ivman system for automounting was not working correctly when I tried to get some usbkeys automounted. A little bit of digging to try to solve the problem brought to my attention that ivman was trying to mount (with pmount), say, /dev/sdX instead of /dev/sdXY (where X is a letter and Y is the number of the partition, you know the scheme) and that's because hal itself doesn't recognize correctly the device, in fact running:
#lshal | grep sd
gives me this
info.linux.driver = 'sd' (string)
block.device = '/dev/sda' (string)
linux.sysfs_path_device = '/sys/block/sda' (string)
linux.sysfs_path = '/sys/block/sda' (string)
instead of this
info.linux.driver = 'sd' (string)
block.device = '/dev/sdb' (string)
linux.sysfs_path_device = '/sys/block/sdb' (string)
linux.sysfs_path = '/sys/block/sdb' (string)
volume.partition.msdos_part_table_type = 6 (0x6) (int)
block.device = '/dev/sdb1' (string)
linux.sysfs_path_device = '/sys/block/sdb/sdb1' (string)
linux.sysfs_path = '/sys/block/sdb/sdb1' (string)
so I googoled a bit and searched thru the forum but wasn't able to find a solution.
Then, out of curiosity, just to see what broke hal, I switched on my laptop which is configured quite similarly to my main machine and I did one by one the upgrades that I had done all together the previous time and I discovered that after the udev upgrade (084-3 -> 084-4) my hal wasn't able to recognize the partitions of the usbkey and thus ivman was trying to mount the device and obviously failing.
I also have to say that if I issue the command:
$pmount /dev/sdXY
it gets mounted without a hitch.
Keep also in mind that I don't have costum rules for none of the programs mentioned above (udev, hal, ivman), just the good ol' vanilla config .
So, what do you think of this?
Thanks to everyone willing to help and sorry for the long explanation (I hope I hadn't missed nothing, in case, just ask) I get a little verbose when I try to explain a problem in english (which is not my first language as you may have noticed)well, thank you very much apoikos.
I reverted the change in the config file and everything was allright again.
I do not own a CF reader either so, like you, I'm not able to tell if this causes any issue.
And I can't even help you on the KDE side 'cause I don't have it installed on my machines.
I was just wondering why noone noticed this problem before if it affects KDE too (and probably Gnome given that the gnome-volume-manager depends on hal). -
Udev[testing] breaks nvidia driver
When udev-118-2 and initscripts-2008.02-1 were both installed from the testing repro it caused the nvidia driver [nvidia-169.09-2] to continually fail to load when starting Xorg, with kernel26 2.6.24.2-1. There was no problem using the xf86-video-nv-2.1.7-1 driver.
My card is a Nvidia GeForce 7300 GS.
Re-installing both the kernel and the nvidia, nvidia-utils packages did not fix the problem.
Re-installing udev-116-3 and initscripts-2007.11-2 from the core repro allowed for the nvidia video drivers to be loaded as normal.
I am not sure if there is a problem with these packages from testing or if there was something that I needed to do to properly configure the system after having upgraded these two packages. I have not seen any forum posts, bug reports, or wiki articles concerning this problem, beyond the Gentoo wiki suggesting that nvidia and udev do not get along well.
Thank you for your time.
edit: This is on a i686 install
Last edited by ladislaio (2008-02-27 02:28:48)I have the same issue. Look if the "nvidiafb" module is loaded, if yes the nvidia module can't be load and X fails to start. Normally that shouldn't be loaded at all, but their exists some issues for specific hardware configurations, that's why it is in testing. Look at the arch-dev-public-ml, we are discussing this topic already (the new udev/initscripts and blacklisting).
@darksheen: There is no need to reinstall the whole system. You just to have downgrade udev and initscripts and your problem would be gone.
EDIT: I filed a bug report here: http://bugs.archlinux.org/task/9701
Daniel
Last edited by ise (2008-02-27 06:29:50) -
Changes to LVM2 and udev break LVM2 on LUKS?
Hey all,
After today's update I have an error on boot that I can't seem to figure out. I like many people, got an error when building mkinitcpio during the update. I reran mkinitcpio after the update, there were no errors, everything was great.
Before I explain the issue fully, here is my setup.
I have a lvm on a luks partition. On the lvm resides "/" "/home" and "swap". My mkinitcpio HOOKs line looks like this
HOOKS="base udev autodetect modconf block mdadm_udev encrypt lvm2 filesystems keyboard fsck"
Note that as you might have guessed from "mdadm_udev" I am using a raid, but this array is separate from my critical partitions, such root and home.
Now for my issue.
When I boot the machine, it executes up until the encrypt hook. It prompts for my password to decrypt the volume, which if given correctly, it does nothing for an unusually long time, then it prints
end_request: I/O error, dev fd0, sector 0
I don't have a floppy drive.
I can mount the system from installation media and chroot into the system, and everything seems fine. I checked my lvm.conf file to make sure it included the line "use_lvmetad = 1" which it does. I reran,
mkinitcpio -p linux
This did not solve the issue.
Any thoughts on what could be causing this?
Thanks,
-D
############## UPDATE ###############
Working fix here: https://bbs.archlinux.org/viewtopic.php … 2#p1232092
Bug report here: https://bugs.archlinux.org/task/33851
Last edited by jasonwryan (2013-02-14 19:45:56)I also use LVM with a configuration similar to Xyne's. I updated this morning and my system booted fine. The only thing unusual about my setup is that I update in chroot from another (minimal) up-to-date Arch system on the same machine. Here's some details, I'm happy to provide anything else if needed.
# fdisk -l /dev/sd?
Disk /dev/sda: 251.1 GB, 251059544064 bytes, 490350672 sectors
Device Boot Start End Blocks Id System
/dev/sda1 2048 2099199 1048576 83 Linux
/dev/sda2 * 2099200 2303999 102400 83 Linux
/dev/sda3 2304000 490350671 244023336 8e Linux LVM
Disk /dev/sdb: 251.1 GB, 251059544064 bytes, 490350672 sectors
Device Boot Start End Blocks Id System
/dev/sdb1 2048 490350671 245174312 8e Linux LVM
Disk /dev/sdc: 251.1 GB, 251059544064 bytes, 490350672 sectors
Device Boot Start End Blocks Id System
/dev/sdc1 2048 490350671 245174312 8e Linux LVM
Note: sda1 is the minimal system, sda2 is /boot for both systems. sda3 and sdb1 make up VG0. sdc1 makes up VG1.
# lvscan
ACTIVE Original '/dev/VG0/lv_root' [5.00 GiB] inherit
ACTIVE Original '/dev/VG0/lv_home' [10.00 GiB] inherit
ACTIVE '/dev/VG0/lv_data' [212.00 GiB] inherit
ACTIVE Original '/dev/VG0/lv_var' [5.71 GiB] contiguous
ACTIVE '/dev/VG0/lv_temp' [10.00 GiB] inherit
ACTIVE '/dev/VG0/lv_build' [10.00 GiB] contiguous
ACTIVE Snapshot '/dev/VG0/ss_root' [5.00 GiB] inherit
ACTIVE Snapshot '/dev/VG0/ss_var' [5.71 GiB] inherit
ACTIVE Snapshot '/dev/VG0/ss_home' [10.00 GiB] inherit
ACTIVE '/dev/VG1/lv_bucket' [230.00 GiB] inherit
ACTIVE '/dev/VG1/lv_swap1' [3.81 GiB] inherit
# cat /etc/mkinitcpio.conf
MODULES="nouveau"
BINARIES=""
FILES=""
HOOKS="timestamp base udev autodetect block lvm2 filesystems fsck shutdown"
COMPRESSION="xz"
COMPRESSION_OPTIONS="-e -9"
I saw something about fd0 when I first ran lvscan after a boot, but it didn't appear again that boot and I haven't tried to reproduce. I also had some errors related to my snapshots during boot:
Feb 13 10:53:18 caddywhompus kernel: device-mapper: table: 254:4: snapshot: Snapshot cow pairing for exception table handover failed
Feb 13 10:53:18 caddywhompus kernel: device-mapper: ioctl: error adding target to table
Feb 13 10:53:18 caddywhompus kernel: device-mapper: table: 254:14: snapshot: Snapshot cow pairing for exception table handover failed
Feb 13 10:53:18 caddywhompus kernel: device-mapper: ioctl: error adding target to table
Note: the first and third lines are "error red" -
My machine boots as far as the "Loading UDev uevents" point then stops and I see the following error:
iTCO_wdt: Unexpected close, not stopping watchdog!
At this point I have about 10 seconds before my machine does a hard reboot. From what I can tell udev is getting hung on a rule I have under /etc/udev/rules.d/00-myrules.rules. The rule is:
IMPORT{program}="vol_id --export $tempnode"
When I comment out this line my machine boots fine. Digging into rc.sysinit, the exact command that is triggering this hang is /sbin/udevadm trigger.
The full listing of said rule file is:
IMPORT{program}="vol_id --export $tempnode"
ENV{ID_FS_UUID}!="aa068b0a-456f-4a76-9ab7-d076d540b5a7", GOTO="not_data2"
ACTION=="add", RUN+="/bin/start-stop-daemon --start --background --pidfile=/var/run/daemons/cryptsetup --startas /usr/sbin/cryptsetup -S -- -d /etc/data2.key luksOpen /dev/%k data2"
ACTION=="remove", RUN+="/usr/sbin/cryptsetup luksClose data2"
LABEL="not_data2"
My machine is a Dell Latitude D830 running Arch 64. Kernel 2.6.27.7-1 and udev 130-1.
Last edited by zosodk69 (2008-12-04 14:15:30)[dave@hendrix ~]$> yaourt -Ss start-stop-daemon
aur/start-stop-daemon 1.13.25-1 [installed]
A Debian program for starting daemons from initscripts
The rule works fine for me if I uncomment the IMPORT line and run:
sudo udevadm control --reload-rules -
Udev breaking the booting process
Hello,
I have a very frustrating problem.
I did install Archlinux... baaaad things happened.
I can't actually boot... eveything is installed fine... but
When I boot the filesystem check fails, saying /dev/sda6 is already mounted.
Says that
/dev/sda6 is mounted [fail]
**********************FILESYSTEM CHECK FAILED ******************
* Please repair manually and reboot. Note that the root file system is currently
* mounted read-only. To remount it read-write type: mount -n -o remount,rw /
* When you exit the maintenance shell the system will reboot automatically
I just won't post my fstab since I can't copy anything, but I've checked it numerous times, and it's not the source of the problem.
I can tell how it's parttioned tho...
sda1 - /boot
sda2 - swap
sda5 - /
sda6 - /usr
sda7 - /usr/local
sda8 - /var
sda9 - /var/log
sda10 - /var/spool
sda11 - /tmp
sda12 - /home
I've tried doing a 'lsof' on maintenance console.
I found out libkmod.so was loaded from /usr by UDEVD... Why the hell UDEVD is loaded there, before fscks?!
Oh... by the way. It's a 100% fresh install.
Thanks,
silknomorewindows wrote:
Here's what I did earlier in another post: (You can copy the needed files to your root partition until it is corrected using a recovery CD or another installation) Then when it finally mounts the /usr partition it will cover up the root partition.
/sbin/modprobe is a soft-link to /usr/bin/kmod which isn't mounted yet, despite the early /usr mount option. When it comes to mounting /usr at that time, I don't think mine is.
Have mine fixed, just put the /usr/bin/kmod binary "undermounted" on my / partition (temporarily) along with /usr/lib/libkmod.so.1 and /usr/lib/libz.so.1 (copying the actual files and then linking to them). Currently, the real files are /usr/lib/libkmod.so.1.3.0 and /usr/lib/libz.so.1.2.5
A better option is to use ABS to grab core/kmod
edit PKGBUILD and add --prefix=/ to the configure args, remove "usr" from the soft links.
Putting something as basic as module loading anywhere other than '/bin' is pure lunacy. I'm sorry but I consider kernel module loading a touch more critical for system bootstrapping than say libreoffice, kde or firefox (all of which *belong* somwhere other than '/'.
I've always built my systems to be minimally bootable (and repairable) from '/' only, then use that to bootstrap all the other partitions like /usr /opt, etc.
I had the unpleasant experience that mkinitcpio.conf somehow got reset (did kernel 3.2.1 cause this?) so that my /usr wasn't mountable and because kmod only resided on '/usr' i couldn't load the module necessary to mount '/usr' to start bootstrap.
and just more ranting, i do't give a rip about what freedesktop says. I don't care about any 'desktop' when booting, i'm more than happy sometimes working in a console.
Last edited by bnolsen (2012-01-23 18:05:10) -
[Solved] Organize the /etc/ /opt/ and /home w/o breaking anything?
+ What are the common organizing tactics that you use?
For example, if you're going to install anything, where do you put it, how do you do it with out breaking anything, etc.
My /etc/ /opt/ and /home folders are getting out of hand.
For my home folder, I have:
Desktop, Downloads, Dropbox (the only ones that I want here), meteor, node, nvm, nplay, pkg, python2-psutil, python26, src, sublime-text-2, try-meteor, packer (file), pacman.conf (file), and dead.letter (file).
How do I move these without breaking anything?
For my /etc/ I have:
adjtime (file), adobe, anacrontab (file), arch-release (file), asound.conf (file), at-spi2, avahi, bash.bash_logout (file), bash.bashrc (file), bash_completion.d, binfmt.d, bluetooth, ca-certificates, ca-certificates.conf (file), chromium, colord.conf (file), conf.d, couchdb, cron.d, cron.daily, cron.deny (file), cron.hourly, cron.monthly, cron.weekly, crypttab (file), cups, dbus-1, dconf, default, depmod.d, dhcpcd.conf (file), drirc (file), enviroment f(ile), fonts, fstab (file), fuse.conf (file), gai.conf (file), gconf, gdm, geoip, group (file), group- (file), grub.d, grub-cutomizer, gshadow (file), gshadow- (file), gssapi_mech.conf (file), gtk-2.0, gtk-3.0, host.conf (file), hostname (file), hosts (file), ifplugd, iftab (file), ImageMagick-6, inputrc (file), iproute2, iptables, issue (file), java-70openjdk, kernel, krb5.conf (file), ld.so.cache (file), ld.so.conf (file), ld.so.conf.d, libnl, libreoffice, locale.conf (file), locale.gen (file), localtime (file), localtime (file), login.defs (file), logrotate.conf (file), logrotate.d, lvm, lxdm, machine-id (file), mail.rc (file), makepkg.conf (file), man_db.conf (file), mdadm.conf (file), mercurial, mine.types (file), mke2fs.conf (file), mkinitcpio.conf (file), mkinitcpio.d, modprobe.d, modprobe.dconf (file), modules-load.d, motd (file), mtab (file), nanorc (file), netconfig (file), network.d, NetworkManager, ncsd.conf (file), nsswitch.conf (file), obex-data-server, odbc.ini (file), ODBCDataSources, odbcinst.ini (file), openldap, os-release (file), pacman.conf (file), pacman.d, pam.d, pango, passwd (file), passwd.OLD (file), passwd- (file), pcmcia, pkcs11, pkgtools, pm, polkit-1, ppp, profile (file), profile.d, protocols (file), pulse, rc.d, rc_keymaps, rc_maps.cfg (file), redis.conf (file), request-key.conf (file), request-key.d, reolv.conf (file), rpc (file), salt, securetty (file), security, services (file), shadow (file), shadow- (file), shells (file), skel, speech-dispactcher, ssl, sudoers (file), sudoers.d, sysctl.conf (file), sysctl.d, systemd, tmpfiles.d, tor, totem, udev, udisks2, updatedb.conf (file), UPower, vdpau_wrapper.cfg (file), wgetrc (file), wpa_supplicant, X11, xdg, xinetd.d, xml, and zsh.
How do I learn what can be deleted here and how do I move things without breaking anything in /etc/? Is there a program that highlights what's important, what can be moved, etc.?
For my /opt/ I have:
android-sdk, dropbox, and tor-browser-en.
This doesn't bother me, but I can see that somewhere in the future where it can get cluttered.
I also have created a folder on my root called ptmp and am using it to store my packertmp-0 files since my tmp folder gave me an error. I want to do things right and not get that cluttered too. So if you know about this check the thread out here
As a new Arch Linux user, coming from Windows 8, everything is great except a few minor annoyances. I give it an 7.8/10 for bring stable.
I will open up new threads for the following, but here are the few minor annoyances I still have:
If I edit what show up on my main menu (with main menu, not menu editor [from gnome]), somehow things get re-highlighted as if I clicked restore to defaults-- so I can't edit what I don't want to show up in my main menu anymore.
I forgot what file I edited that I made Chromium run at startup and now it slows things down by running at startup.
I couldn't exchange nautilus for dolphin (I like dophin better), and couldn't get xmonad going although I got the dependancies installed (Haskell, etc.). It throws me this error:
Please check the file for errors.
/home/jayvan/.xmonad/xmonad-x86_64-linux: executeFile: does not exist (No such file or directory)
xmonad:
xmessage: executeFile: does not exist (No such file or directory)
X Error of failed request: BadAccess (attempt to access private resource denied)
Major opcode of failed request: 2 (X_ChangeWindowAttributes)
Serial number of failed request: 7
Current serial number in output stream: 8
I can't remove the Universal access applet. I don't need it. This should be removable.
There is no longer a high performance, low performance, balanced option for battery consumption. This should make a comeback.
I somehow edited my information of my user and it's not editable through system settigns. It shows my company, phone number, etc. I manually entered a command that I forgot in the terminal that did this. I'm not sure. This should be easily editable in Gnome 3. I don't know why it isn't.
I've created a news user and don't know how to delete it.
I couldn't get mp3tag to work with packer because it didn't have a PKGFILE. Will be trying to manually make it some time later, but it should be fixed in the AUR.
I would like to uninstall the Epiphany Browser. Desktop Search, Power Statistics but don't know how. I know it's -Rns.
Sublime Text 2 doesn't show up as a desktop item in the applications folder, I have to go to the folder and click sublime_text to launch it.
When I change YouTube to anything higher than 240p, it doesn't play and I have to refresh it.
Grub-sustomizer should come installed with Gnome, especially for those that want to dual boot Android OS (x86) or anyhting else. In fact, in the installation guide there should be a warning that if you plan to install another OS like Android OS (x86) you should partition an extra 16 GB as ext3, or if you want to install another Linux distro to partition an extra 20GB as ext4.
There isn't any multitouch gestures pre-installed that I can configure. I'll see if they even exist.
I haven't check but I'm not sure if there is a good screen capturing app.
Last, so I can switch all my friends to Arch, they've already taken an interest an I plan to do a blog post about it once I feel confident, how can I customize this scrip to install the apps I already have installed?
I'll get to posting these in seperate threads right now.
Last edited by jjshinobi (2013-04-09 19:57:23)Ohhh man, you're making me nervous! Are you copying your files around your operating system yourself?
jjshinobi wrote:What are the common organizing tactics that you use?
The answer to your question is, I don't organize anything. Instead, pacman keeps track of all the files.
The only files you should need to worry about are what's in "/home". You can organize that however you want. If you have many ebooks, create a directory called "Books". Whatever.
Your story kind of reminds me of my roommate in college. As soon as he finished installing Windows XP, he would go through the entire directory structure and delete anything that was "unnecessary". It kind of scared me.
But fortunately, we don't have to do that with Arch Linux. Pacman takes care of everything, and it's super easy to create your own package. -
Need Help in Breaking a big view into multiple small views or tuning the vw
Hi
I have the following view can some one help me in breaking the view in small views or any recommendations for tuning it.
CODE
CREATE OR REPLACE FORCE VIEW "CRUVPD"."PX16_CHK_VW_SUMMARY_VW" ("CIDN", "BATCH_NUMBER", "BUSINESS_UNIT", "CHECK_VOUCHER_NUMBER", "CHECK_VOUCHER_CODE", "CHECKVIEW_CLOCK_NUMBER", "COMPANY_CHECKVIEW_HOME_DEPT", "PERIOD_END_DATE", "FEDERAL_TAX", "GROSS_PAY"
, "HOME_DEPARTMENT", "HOME_DEPARTMENT_DESC", "LIVED_LOCAL_TAX_CODE", "LIVED_STATE_TAX_CODE", "LIVED_LOCAL_TAX", "LIVED_STATE_TAX", "MEDICARE_TAX", "NET_PAY", "DEPARTMENT_WORKED_IN", "PAY_TO_COMPANY_INDICATOR", "PAY_DATE", "PAYROLL_NUMBER", "SCHOOL_DISTRIC
T_TAX", "CHECKVIEW_SCHOOL_DISTRICT", "SOCIAL_SECURITY_TAX", "SUI_SDI_TAX", "SUI_SDI_TAX_CODE", "VOID_CHECK_INDICATOR", "WEEK_NUMBER", "WORKED_LOCAL_TAX_CODE", "WORKED_STATE_TAX_CODE", "WORKED_LOCAL_TAX", "WORKED_STATE_TAX", "YEAR", "COMPANY_CODE", "FILE_N
UMBER", "FIRST_NAME", "LAST_NAME", "LAST_NAME_FIRST_NAME", "SOCIAL_SECURITY_NUMBER", "STATUS", "OVERTIME_EARNINGS", "OVERTIME_HOURS", "REGULAR_EARNINGS", "REGULAR_HOURS", "VIEWPK", "HOME_COST_NUMBER", "TAX_FREQUENCY", "COMPANY_COST_NUMBER", "COST_NUMBER_W
ORKED_IN", "DISTRIBUTION_NUMBER", "TOTAL_DEDUCTIONS_AMOUNT", "TOTAL_HOURS_AMOUNT", "TOTAL_MEMO_AMOUNT", "TOTAL_OTHER_EARNINGS", "TOTAL_OTHER_HOURS", "CHECK_SEQ_NO", "JOINKEY", "CHECK_REVERSAL_INDICATOR") AS
with user_security_homedept
AS
(select /*+ INLINE */ distinct cg.cidn,co_code,asso.oid,asso.name,department_Access ,t2.column_value dep,cg.oid
from px16_cocodegroup cg ,
px16_associate asso ,
px16_securityobject so,
px16_cocodegrp_securitygrp cs,
px16_security_group sg ,
TABLE(f_str2tbl_px16(cg.department_access)) t2
where cg.USEROID = asso.OID
and cg.co_code = substr(so.name,8,3)
and upper(asso.name) = upper(sys_context('payx_r16_app_context', 'app_userid'))
and cg.oid = cs.cocodegroupoid
and cs.securitygroupoid = sg.oid
and cg.cidn = asso.cidn
and cg.cidn = so.cidn
and cg.cidn = cs.cidn
and cs.cidn = sg.cidn
order by 2,1
user_security_cost_no
AS
(select /*+ INLINE */
cg.cidn,co_code,count(distinct cd.code)cost_no,cd.code
from px16_cocodegroup cg ,
px16_associate asso ,
px16_securityobject so,
px16_cocodegrp_securitygrp cs,
px16_security_group sg ,
px16_customaccessdetail cd
where cg.USEROID = asso.OID
and cg.co_code = substr(so.name,8,3)
and upper(asso.name) = upper(sys_context('payx_r16_app_context', 'app_userid'))
and cg.oid = cs.cocodegroupoid
and cs.securitygroupoid = sg.oid
and cg.oid = cd.cocodegroupoid(+)
and cg.cidn = cd.cidn(+)
and cg.cidn = asso.cidn
and cg.cidn = so.cidn
and cg.cidn = cs.cidn
and cs.cidn = sg.cidn
group by cg.cidn,co_code,cd.code
order by 2,1
super_user_check as
(SELECT
distinct a.cidn su_cidn,1 as su_user
FROM
px16_LINK LN
, px16_userprofile up
, px16_ASSOCIATE a
, px16_pcp_user pu
WHERE
a.oid = pu.oid
AND pu.userprofileoid = up.oid
AND LN.parentoid = up.oid
AND a.active = 1
AND a.cidn=pu.cidn
AND pu.cidn=up.cidn
AND ln.cidn=up.cidn
AND upper(a.name) = upper(sys_context('payx_r16_app_context', 'app_userid'))
AND upper(up.name) = upper('Super user')
nonsuper_user_check as
SELECT distinct a.cidn s_cidn , 1 as non_user
FROM
px16_LINK LN
, px16_userprofile up
, px16_ASSOCIATE a
, px16_pcp_user pu
WHERE
a.oid = pu.oid
AND pu.userprofileoid = up.oid
AND LN.parentoid = up.oid
AND a.active = 1
AND a.cidn=pu.cidn
AND pu.cidn=up.cidn
AND ln.cidn=up.cidn
AND upper(a.name) = upper(sys_context('payx_r16_app_context', 'app_userid'))
AND LN.childoid IN ( 'SYS:5:7478')
SELECT distinct
cidn
,batch_number Batch_Number
, business_unit Business_Unit
, check_voucher_number Check_Voucher_Number
, check_voucher_code Check_Voucher_Code
, clock_number CheckView_Clock_Number
, company_code_or_dept Company_CheckView_Home_Dept
, period_end_date Period_End_Date
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, 1, (INSTR(taxes_and_rates, '~', 1, 1) -1)), CHR(155), NULL)) Federal_Tax
, gross_pay Gross_Pay
, home_department Home_Department
, home_department_descr Home_Department_Desc
, SUBSTR(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 1) +1)
, INSTR(taxes_and_rates, '~', 1, 2) - (INSTR(taxes_and_rates, '~', 1, 1) +1)), CHR(155), NULL), 1, 32) Lived_Local_Tax_Code
, SUBSTR(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 2) +1)
, INSTR(taxes_and_rates, '~', 1, 3) - (INSTR(taxes_and_rates, '~', 1, 2) +1)), CHR(155), NULL), 1, 32) Lived_State_Tax_Code
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 3) +1)
, INSTR(taxes_and_rates, '~', 1, 4) - (INSTR(taxes_and_rates, '~', 1, 3) +1)), CHR(155), NULL)) Lived_Local_Tax
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 4) +1)
, INSTR(taxes_and_rates, '~', 1, 5) - (INSTR(taxes_and_rates, '~', 1, 4) +1)), CHR(155), NULL)) Lived_State_Tax
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 5) +1)
, INSTR(taxes_and_rates, '~', 1, 6) - (INSTR(taxes_and_rates, '~', 1, 5) +1)), CHR(155), NULL)) Medicare_Tax
, net_pay Net_Pay
, department_paid Department_Worked_In
, to_pay_indicator Pay_to_Company_Indicator
, pay_date Pay_Date
, payroll_number Payroll_Number
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 6) +1)
, INSTR(taxes_and_rates, '~', 1, 7) - (INSTR(taxes_and_rates, '~', 1, 6) +1)), CHR(155), NULL)) School_District_Tax
, SUBSTR(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 7) +1)
, INSTR(taxes_and_rates, '~', 1, 8) - (INSTR(taxes_and_rates, '~', 1, 7) +1)), CHR(155), NULL), 1, 32) CheckView_School_District
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 8) +1)
, INSTR(taxes_and_rates, '~', 1, 9) - (INSTR(taxes_and_rates, '~', 1, 8) +1)), CHR(155), NULL)) Social_Security_Tax
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 9) +1)
, INSTR(taxes_and_rates, '~', 1, 10) - (INSTR(taxes_and_rates, '~', 1, 9) +1)), CHR(155), NULL)) SUI_SDI_Tax
, SUBSTR(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 10) +1)
, INSTR(taxes_and_rates, '~', 1, 11) - (INSTR(taxes_and_rates, '~', 1, 10) +1)), CHR(155), NULL), 1, 32) SUI_SDI_Tax_Code
, void_check_indicator Void_Check_Indicator
, week_number Week_Number
, SUBSTR(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 11) +1)
, INSTR(taxes_and_rates, '~', 1, 12) - (INSTR(taxes_and_rates, '~', 1, 11) +1)), CHR(155), NULL), 1, 32) Worked_Local_Tax_Code
, SUBSTR(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 12) +1)
, INSTR(taxes_and_rates, '~', 1, 13) - (INSTR(taxes_and_rates, '~', 1, 12) +1)), CHR(155), NULL), 1, 32) Worked_State_Tax_Code
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 13) +1)
, INSTR(taxes_and_rates, '~', 1, 14) - (INSTR(taxes_and_rates, '~', 1, 13) +1)), CHR(155), NULL)) Worked_Local_Tax
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 14) +1)
, INSTR(taxes_and_rates, '~', 1, 15) - (INSTR(taxes_and_rates, '~', 1, 14) +1)), CHR(155), NULL)) Worked_State_Tax
, year Year
, company_code Company_Code
, file_number File_Number
, first_name First_Name
, last_name Last_Name
, name Last_Name_First_Name
, ssn Social_Security_Number
, status Status
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 15) +1)
, INSTR(taxes_and_rates, '~', 1, 16) - (INSTR(taxes_and_rates, '~', 1, 15) +1)), CHR(155), NULL)) Overtime_Earnings
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 16) +1)
, INSTR(taxes_and_rates, '~', 1, 17) - (INSTR(taxes_and_rates, '~', 1, 16) +1)), CHR(155), NULL)) Overtime_Hours
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 17) +1)
, INSTR(taxes_and_rates, '~', 1, 18) - (INSTR(taxes_and_rates, '~', 1, 17) +1)), CHR(155), NULL)) Regular_Earnings
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 18) +1)
, INSTR(taxes_and_rates, '~', 1, 19) - (INSTR(taxes_and_rates, '~', 1, 18) +1)), CHR(155), NULL)) Regular_Hours
, (company_code || '/' || ssn || '/' || file_number || '/' || TO_CHAR(payroll_number) || '/'
|| TO_CHAR(year) || '/' || TO_CHAR(week_number) || '/' || check_voucher_number
|| '/' || to_char(check_seq_num) || '/' || TO_CHAR(distribution_number)) Viewpk
, home_costnumber_desc Home_Cost_Number
, tax_frequency Tax_Frequency
, co_chkv_home_cost_no Company_Cost_Number
, cost_no_worked_in Cost_Number_Worked_In
, distribution_number Distribution_Number
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 19) +1)
, INSTR(taxes_and_rates, '~', 1, 20) - (INSTR(taxes_and_rates, '~', 1, 19) +1)), CHR(155), NULL)) Total_Deductions_Amount
, NVL(TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 20) +1)
, INSTR(taxes_and_rates, '~', 1, 21) - (INSTR(taxes_and_rates, '~', 1, 20) +1)), CHR(155), NULL)), 0) Total_Hours_Amount
, NVL(TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 21) +1)
, INSTR(taxes_and_rates, '~', 1, 22) - (INSTR(taxes_and_rates, '~', 1, 21) +1)), CHR(155), NULL)), 0) Total_Memo_Amount
, NVL(TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 22) +1)
, INSTR(taxes_and_rates, '~', 1, 23) - (INSTR(taxes_and_rates, '~', 1, 22) +1)), CHR(155), NULL)), 0) Total_Other_Earnings
, TO_NUMBER(REPLACE(SUBSTR(taxes_and_rates, (INSTR(taxes_and_rates, '~', 1, 23) +1)), CHR(155), NULL)) Total_Other_Hours
, check_seq_num Check_Seq_No
, (NVL(company_code, '~') || CHR(155) || NVL(file_number, '~') || CHR(155) || NVL(ssn, '~') || CHR(155) || NVL(TO_CHAR(year), '~') || CHR(155)
|| NVL(TO_CHAR(week_number), '~') || CHR(155) || NVL(TO_CHAR(payroll_number), '~')
|| CHR(155) || NVL(check_voucher_number, '~') || CHR(155) || NVL(TO_CHAR(check_seq_num), '~') || CHR(155) || NVL(TO_CHAR(distribution_number), '~')) Joinkey
, chk_reverse Check_Reversal_Indicator
FROM
SELECT
ch.cidn cidn
/*BATCH NUMBER*/
, ch.batch_nb batch_number
, /*BUSINESS UNIT*/
(select asso.description
from px16_appointment ap,
px16_jobposition jp,
px16_corporation co,
px16_associate asso,
px16_payrollagreement pa,
px16_payrollgroup pg
where
ch.cidn = pg.cidn
AND ch.cidn = pa.cidn
AND pa.cidn = pg.cidn
AND pa.cidn = ap.cidn
AND em.cidn = ap.cidn
AND ap.cidn = jp.cidn
and jp.cidn = co.cidn
and co.cidn = asso.cidn
and ch.co_code=pg.co_code
and ch.file_nb=pa.file_number
and pa.cocodeoid=pg.oid
and pa.appointmentoid=ap.oid
and em.oid=ap.employmentoid
and ap.jobpositionoid=jp.oid
and jp.corporationoid=co.oid
and co.oid=asso.oid) business_unit
, /*CHECK/VOUCHER NUMBER*/
ch.check_nb check_voucher_number
, /*CHECK/VOUCHER CODE*/
SUBSTR(f_type_px16(ch.cidn,ch.chkvchcodeoid, 'NAME'), 1, 255) check_voucher_code
, /*CLOCK NUMBER*/
ch.clock_id clock_number
, /* COMPANY CODE OR DEPT*/
ch.co_code||'/'||substr(ch.home_dept_code,1,20) company_code_or_dept
, /*PERIOD END DATE*/
ch.payroll_ending_date period_end_date
, /*GROSS PAY*/
NVL(chd.gross_pay_amt,0) gross_pay
, /*HOME DEPARTMENT*/
ch.home_dept_code home_department
, /*HOME DEPARTMENT DESCRIPTION*/
(select ty.description
from px16_type ty,px16_securityobject sc
where
ch.cidn = sc.cidn
and ty.cidn in ('COMMON', ch.cidn)
and ch.home_dept_code=ty.name
and ty.category='T_CO_DEPT'
and ty.securityoid=sc.oid
and ch.co_code=substr(sc.name,8)) home_department_descr
, /*NET PAY*/
nvl(chd.net_pay_amt,0) net_pay
, /*DEPARTMENT PAID*/
-- ch.paid_in_debt_code department_paid
chd.worked_in_dept department_paid
, /*TO PAY INDICATOR*/
decode(to_char(ch.pay_to_co),'1','Y','0','N',to_char(ch.pay_to_co)) to_pay_indicator
, /*PAY DATE*/
ch.pay_date pay_date
, /*PAYROLL NUMBER*/
to_char(ch.payroll_nb) payroll_number
, /*VOID CHECK INDICATOR*/
decode(to_char(ch.void_flag),'1','Y','0','N',to_char(ch.void_flag)) void_check_indicator
, /*WEEK NUMBER*/
TO_number(ch.week) week_number
, /*YEAR*/
to_char(ch.year) year
, /*COMPANY CODE*/
ch.co_code company_code
, /*FILE NUMBER*/
LPAD(ch.file_nb,6,0) file_number
, /*FIRST NAME*/
pe.first_name first_name
, /*LAST NAME*/
pe.last_name last_name
, /*NAME*/
pe.last_name||', '||pe.first_name name
, /*SSN*/
payx_r16_principal_info.masked_ssn(pe.unique_id, ch.cidn) ssn
, /*STATUS*/
(SELECT SUBSTR(f_type_px16(ap.cidn,ap.currentstatusoid, 'DESC'), 1, 255)
from
px16_appointment ap,
/*context co_ap,*/
px16_payrollagreement pa,
px16_payrollgroup pg
where
pg.cidn=ch.cidn
and pa.cidn=ch.cidn
and ap.cidn=pa.cidn
and ap.cidn = em.cidn
and ap.employmentoid=em.oid
and ap.active=1
and ap.oid=pa.appointmentoid
and lpad(to_char(pa.file_number),6,0)=ch.file_nb
and pa.cocodeoid=pg.oid
and pg.co_code=ch.co_code) status
-- FED TAX
-- , LIVED LOCAL TAX CODE, LIVED STATE TAX CODE, LIVED LOCAL TAX, LIVED STATE TAX, MEDICARE TAX
-- , SCHOOL DISTRICT TAX, SCHOOL DISTRICT, SOCIAL SECURITY TAX, SUI SDI TAX, SUI SDI TAX CODE
-- , WORKED LOCAL TAX CODE, WORKED STATE TAX CODE, WORKED LOCAL TAX, WORKED STATE TAX
-- , OVERTIME EARNINGS, OVERTIME HOURS, REGULAR EARNINGS, REGULAR HOURS
NVL (
(SELECT
TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2982', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| NVL(MAX(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2984', ci.code, NULL), NULL)), CHR(155)) || '~'
|| NVL(MAX(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2987', DECODE(ci.code,'XX',null,ci.code), NULL), NULL)), CHR(155)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2984', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2987', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:4118', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:4114', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| NVL(MAX(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:4114', ci.code, NULL), NULL)), CHR(155)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2988', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2989', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| NVL(MAX(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2989', ci.code, NULL), NULL)), CHR(155)) || '~'
|| NVL(MAX(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2983', ci.code, NULL), NULL)), CHR(155)) || '~'
|| NVL(MAX(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2986', ci.code, NULL), NULL)), CHR(155)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2983', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3709', DECODE(ci.taxcodeoid, 'SYS:4:2986', NVL(ci.amount,0), 0), 0) ), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3713', NVL(ci.amount,0), 0)), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3727', NVL(ci.amount,0), 0)), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3715', NVL(ci.amount,0), 0)), 0)) || '~'
|| TO_CHAR(NVL(SUM(DECODE(ci.histtypeoid, 'SYS:4:3716', NVL(ci.amount,0), 0)), 0)) || '~'
-- R16 columns.
-- Total Deductions Amount === Other Deductions on UI screen.
|| TO_CHAR(NVL(SUM(DECODE(chcat.name, 'DeductionHistory'
, DECODE(NVL(ci.statutory_ded, 0), 0
, DECODE(ci.taxcodeoid, NULL
, DECODE(ci.code, NULL, 0, NVL(ci.amount,0)), 0), 0), 0)), 0)) || '~' -- "Total Deductions Amount"
|| TO_CHAR(NVL(SUM(DECODE(chcat.name, 'OvertimeHours', NVL(ci.amount,0)
, 'AdditionalHours', NVL(ci.amount,0), 'RegularHours', NVL(ci.amount,0), 0)), 0)) || '~' -- "Total Hours Amount"
|| TO_CHAR(NVL(SUM(DECODE(chcat.name, 'Memo', NVL(ci.amount,0), 0)), 0)) || '~' -- "Total Memo Amount"
|| TO_CHAR(NVL(SUM(DECODE(chcat.name, 'AdditionalEarnings', NVL(ci.amount,0), 0)), 0)) || '~' -- "Total Other Earnings"
|| TO_CHAR(NVL(SUM(DECODE(chcat.name, 'AdditionalHours', NVL(ci.amount,0), 0)), 0)) -- "Total Other Hours"
FROM
px16_checkhistoryitem ci
, px16_sys_type chcat
WHERE
ci.cidn=chd.cidn
AND ci.checkhistorydistributionoid = chd.oid
AND chcat.category = 'CheckHistoryItem'
AND chcat.oid = ci.histtypeoid
-- AND ci.histtypeoid IN ('SYS:4:3713', 'SYS:4:3727', 'SYS:4:3715', 'SYS:4:3716', 'SYS:4:3709')
), '0' || '~' || CHR(155) || '~' || CHR(155)
|| '0~0~0~0~' || CHR(155) || '~0~0~' || CHR(155) || '~' || CHR(155) || '~'
|| CHR(155) || '~0~0~0~0~0~0'
) taxes_and_rates
, ch.check_seq_num check_seq_num
, ch.home_cost_number home_costnumber_desc
, SUBSTR(f_type_px16(ch.cidn,ch.payfrequencyoid, 'NAME'), 1, 255) tax_frequency
, (ch.co_code || '/' || ch.home_cost_number) co_chkv_home_cost_no
, chd.worked_in_cost_number cost_no_worked_in
, chd.distribution_number distribution_number
, DECODE(NVL(ch.reversed_flag, 0), 1, 'Y', 'N') chk_reverse
FROM
px16_checkhistory ch
, px16_employment em
, px16_person pe
, px16_payrollgroup pg
, px16_checkhistory_dist chd
, px16_appointment ap
WHERE
ch.cidn = em.cidn
and em.cidn = pe.cidn
and pg.cidn = ch.cidn
and ch.cidn = chd.cidn
and ap.cidn(+) = em.cidn
and ch.employmentoid=em.oid
AND em.personoid=pe.oid
AND pg.co_code = ch.co_code
AND ch.active = 1
AND ch.oid = chd.checkhistoryoid
AND ap.employmentoid(+) = em.oid
AND DECODE(ap.oid, NULL, 1, NVL((SELECT 1 FROM px16_payrollagreement pa
WHERE
pa.cidn = ap.cidn
and pa.cidn = ch.cidn
and pa.cidn = pg.cidn
and pa.appointmentoid = ap.oid
AND pa.file_number = ch.file_nb
AND pa.cocodeoid = pg.oid), 0)) = 1
and ch.cidn in (select distinct s_cidn from nonsuper_user_check)
AND ( sys_context('payx_r16_app_context', 'app_role') in ('ADP', 'CSR')
or (exists (select 1 from super_user_check where su_cidn =ch.cidn))
or (ch.cidn,ch.co_code,ch.home_dept_code) in (select cidn,co_code,dep from user_security_homedept)
or (ch.cidn,ch.co_code,ch.home_cost_number) in (select cidn,co_code,code from user_security_cost_no)
or ( exists(select co_code from user_security_homedept where cidn=ch.cidn and co_code = ch.co_code and dep is null)
and exists(select co_code from user_security_cost_no where cidn=ch.cidn and co_code = ch.co_code and cost_no = 0) )
Explain plan
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
| 0 | SELECT STATEMENT | | 1 | 7519 | 99 (2)|
| 1 | VIEW | PX16_CHK_VW_SUMMARY_VW | 1 | 7519 | |
| 2 | SORT UNIQUE | | 1 | 445 | 78 (0)|
|* 3 | FILTER | | | | |
| 4 | NESTED LOOPS OUTER | | 1 | 445 | 63 (2)|
| 5 | NESTED LOOPS | | 1 | 414 | 58 (2)|
| 6 | NESTED LOOPS | | 1 | 362 | 53 (2)|
| 7 | NESTED LOOPS | | 1 | 331 | 48 (3)|
| 8 | NESTED LOOPS | | 1 | 306 | 43 (3)|
| 9 | NESTED LOOPS | | 1 | 253 | 38 (3)|
| 10 | NESTED LOOPS | | 1 | 120 | 23 (5)|
| 11 | NESTED LOOPS | | 1 | 79 | 18 (6)|
| 12 | NESTED LOOPS | | 1 | 53 | 13 (8)|
|* 13 | INDEX FAST FULL SCAN | USERPROFILE_GG_U | 5 | 110 | 11 (0)|
|* 14 | INDEX RANGE SCAN | UQ_LINK | 1 | 31 | |
| 15 | TABLE ACCESS BY INDEX ROWID | PCP_USER | 1 | 26 | 6 (17)|
|* 16 | INDEX RANGE SCAN | XIF3PCP_USER | 1 | | |
|* 17 | TABLE ACCESS BY INDEX ROWID | ASSOCIATE | 1 | 41 | 6 (17)|
|* 18 | INDEX UNIQUE SCAN | ASSOCIATE_GG_U | 1 | | |
|* 19 | TABLE ACCESS BY INDEX ROWID | CHECKHISTORY | 1 | 133 | 16 (7)|
|* 20 | INDEX RANGE SCAN | J_CO_CODE | 13 | | 2 (0)|
| 21 | TABLE ACCESS BY INDEX ROWID | CHECKHISTORYDISTRIBUTION | 1 | 53 | 6 (17)|
|* 22 | INDEX RANGE SCAN | TMP_IDX11 | 1 | | |
| 23 | TABLE ACCESS BY INDEX ROWID | PAYROLLGROUP | 1 | 25 | 6 (17)|
|* 24 | INDEX RANGE SCAN | PAYROLLGROUP_IDX2 | 1 | | |
| 25 | TABLE ACCESS BY INDEX ROWID | EMPLOYMENT | 1 | 31 | 6 (17)|
|* 26 | INDEX UNIQUE SCAN | EMPLOYMENT_GG_U | 1 | | |
| 27 | TABLE ACCESS BY INDEX ROWID | PERSON | 1 | 52 | 6 (17)|
|* 28 | INDEX UNIQUE SCAN | PERSON_GG_U | 1 | | |
| 29 | TABLE ACCESS BY INDEX ROWID | APPOINTMENT | 1 | 31 | 6 (17)|
|* 30 | INDEX RANGE SCAN | XIF12APPOINTMENT | 1 | | |
|* 31 | FILTER | | | | |
|* 32 | TABLE ACCESS BY INDEX ROWID | PAYROLLAGREEMENT | 1 | 34 | 21 (5)|
|* 33 | INDEX RANGE SCAN | UQ_FILE_NO_COCODE | 1 | | 3 (0)|
|* 34 | FILTER | | | | |
| 35 | NESTED LOOPS | | 1 | 130 | 27 (4)|
| 36 | NESTED LOOPS | | 1 | 89 | 22 (5)|
| 37 | NESTED LOOPS | | 1 | 63 | 17 (6)|
|* 38 | TABLE ACCESS BY INDEX ROWID | USERPROFILE | 1 | 41 | 16 (7)|
|* 39 | INDEX RANGE SCAN | XIF1USERPROFILE | 1 | | 2 (0)|
|* 40 | INDEX RANGE SCAN | LINK_IDX2 | 1 | 22 | |
| 41 | TABLE ACCESS BY INDEX ROWID | PCP_USER | 1 | 26 | 6 (17)|
|* 42 | INDEX RANGE SCAN | XIF3PCP_USER | 1 | | |
|* 43 | TABLE ACCESS BY INDEX ROWID | ASSOCIATE | 1 | 41 | 6 (17)|
|* 44 | INDEX UNIQUE SCAN | ASSOCIATE_GG_U | 1 | | |
|* 45 | FILTER | | | | |
| 46 | NESTED LOOPS | | 1 | 144 | 48 (3)|
| 47 | MERGE JOIN CARTESIAN | | 1 | 142 | 37 (3)|
| 48 | NESTED LOOPS | | 1 | 116 | 32 (4)|
| 49 | NESTED LOOPS | | 1 | 96 | 31 (4)|
| 50 | NESTED LOOPS | | 1 | 72 | 26 (4)|
|* 51 | TABLE ACCESS BY INDEX ROWID | COCODEGROUP | 1 | 34 | 21 (5)|
|* 52 | INDEX RANGE SCAN | XIF1COCODEGROUP | 9 | | 2 (0)|
|* 53 | TABLE ACCESS BY INDEX ROWID | ASSOCIATE | 1 | 38 | 6 (17)|
|* 54 | INDEX UNIQUE SCAN | ASSOCIATE_GG_U | 1 | | |
|* 55 | INDEX RANGE SCAN | COSEC_IDX_GG | 1 | 24 | 1 (0)|
|* 56 | INDEX UNIQUE SCAN | SECURITY_GROUP_GG_U | 1 | 20 | |
| 57 | BUFFER SORT | | 1 | 26 | 35 (0)|
|* 58 | INDEX RANGE SCAN | UQ_SECURITYOBJECT | 1 | 26 | 1 (0)|
|* 59 | COLLECTION ITERATOR PICKLER FETCH | F_STR2TBL_PX16 | | | |
|* 60 | FILTER | | | | |
| 61 | SORT GROUP BY | | 1 | 183 | 66 (0)|
| 62 | NESTED LOOPS | | 1 | 183 | 51 (2)|
| 63 | NESTED LOOPS | | 1 | 163 | 50 (2)|
|* 64 | HASH JOIN OUTER | | 1 | 139 | 45 (3)|
| 65 | NESTED LOOPS | | 1 | 96 | 42 (3)|
|* 66 | HASH JOIN | | 1 | 58 | 37 (3)|
| 67 | TABLE ACCESS BY INDEX ROWID | SECURITYOBJECT | 13 | 338 | 16 (7)|
|* 68 | INDEX RANGE SCAN | SECURITYOBJECT_IDX1 | 13 | | 2 (0)|
| 69 | TABLE ACCESS BY INDEX ROWID | COCODEGROUP | 9 | 288 | 21 (5)|
|* 70 | INDEX RANGE SCAN | XIF1COCODEGROUP | 1 | | 2 (0)|
|* 71 | TABLE ACCESS BY INDEX ROWID | ASSOCIATE | 1 | 38 | 6 (17)|
|* 72 | INDEX UNIQUE SCAN | ASSOCIATE_GG_U | 1 | | |
|* 73 | TABLE ACCESS FULL | CUSTOMACCESSDETAIL | 9 | 387 | 2 (0)|
|* 74 | INDEX RANGE SCAN | COSEC_IDX_GG | 1 | 24 | 1 (0)|
|* 75 | INDEX UNIQUE SCAN | SECURITY_GROUP_GG_U | 1 | 20 | |
| 76 | VIEW | | 1 | 2032 | |
| 77 | SORT UNIQUE | | 1 | 144 | 63 (0)|
|* 78 | FILTER | | | | |
| 79 | NESTED LOOPS | | 1 | 144 | 48 (3)|
| 80 | NESTED LOOPS | | 1 | 142 | 37 (3)|
| 81 | NESTED LOOPS | | 1 | 104 | 32 (4)|
| 82 | NESTED LOOPS | | 1 | 84 | 31 (4)|
| 83 | NESTED LOOPS | | 1 | 60 | 26 (4)|
|* 84 | TABLE ACCESS BY INDEX ROWID | COCODEGROUP | 1 | 34 | 21 (5)|
|* 85 | INDEX RANGE SCAN | XIF1COCODEGROUP | 9 | | 2 (0)|
|* 86 | INDEX RANGE SCAN | UQ_SECURITYOBJECT | 1 | 26 | 1 (0)|
|* 87 | INDEX RANGE SCAN | COSEC_IDX_GG | 1 | 24 | 1 (0)|
|* 88 | INDEX UNIQUE SCAN | SECURITY_GROUP_GG_U | 1 | 20 | |
|* 89 | TABLE ACCESS BY INDEX ROWID | ASSOCIATE | 1 | 38 | 6 (17)|
|* 90 | INDEX UNIQUE SCAN | ASSOCIATE_GG_U | 1 | | |
|* 91 | COLLECTION ITERATOR PICKLER FETCH| F_STR2TBL_PX16 | | | |
| 92 | VIEW | | 1 | 43 | |
|* 93 | FILTER | | | | |
| 94 | SORT GROUP BY | | 1 | 183 | 55 (0)|
|* 95 | FILTER | | | | |
| 96 | NESTED LOOPS | | 1 | 183 | 40 (3)|
| 97 | NESTED LOOPS | | 1 | 163 | 39 (3)|
|* 98 | HASH JOIN OUTER | | 1 | 139 | 34 (3)|
| 99 | NESTED LOOPS | | 1 | 96 | 31 (4)|
| 100 | NESTED LOOPS | | 1 | 58 | 26 (4)|
|*101 | TABLE ACCESS BY INDEX ROWID | COCODEGROUP | 1 | 32 | 21 (5)|
|*102 | INDEX RANGE SCAN | XIF1COCODEGROUP | 9 | | 2 (0)|
|*103 | INDEX RANGE SCAN | UQ_SECURITYOBJECT | 1 | 26 | 1 (0)|
|*104 | TABLE ACCESS BY INDEX ROWID | ASSOCIATE | 1 | 38 | 6 (17)|
|*105 | INDEX UNIQUE SCAN | ASSOCIATE_GG_U | 1 | | |
|*106 | TABLE ACCESS FULL | CUSTOMACCESSDETAIL | 9 | 387 | 2 (0)|
|*107 | INDEX RANGE SCAN | COSEC_IDX_GG | 1 | 24 | 1 (0)|
|*108 | INDEX UNIQUE SCAN | SECURITY_GROUP_GG_U | 1 | 20 | |
Predicate Information (identified by operation id):
3 - filter(DECODE("SYS_ALIAS_19"."OID",NULL,1,NVL( (SELECT /*+ */ 1 FROM "PAYX_R16"."PAYROLLAGREEMENT"
"PX16_PAYROLLAGREEMENT" WHERE :B1='C69C1Y' AND :B2=:B3 AND :B4=:B5 AND
"PX16_PAYROLLAGREEMENT"."FILE_NUMBER"=TO_NUMBER(:B6) AND "PX16_PAYROLLAGREEMENT"."COCODEOID"=:B7 AND
"PX16_PAYROLLAGREEMENT"."CIDN"=:B8 AND "PX16_PAYROLLAGREEMENT"."APPOINTMENTOID"=:B9),0))=1 AND
(SYS_CONTEXT('payx_r16_app_context','app_role')='ADP' OR
SYS_CONTEXT('payx_r16_app_context','app_role')='CSR' OR EXISTS (SELECT /*+ */ 0 FROM
"PAYX_R16"."PCP_USER" "PX16_PCP_USER","PAYX_R16"."ASSOCIATE" "PX16_ASSOCIATE","PAYX_R16"."USERPROFILE"
"PX16_USERPROFILE","PAYX_R16"."LINK" "PX16_LINK" WHERE :B10='C69C1Y' AND
"PX16_LINK"."PARENTOID"="PX16_USERPROFILE"."OID" AND "PX16_LINK"."CIDN"='C69C1Y' AND
"PX16_LINK"."CIDN"=:B11 AND "PX16_USERPROFILE"."CIDN"='C69C1Y' AND UPPER("PX16_USERPROFILE"."NAME")='SUPER
USER' AND "PX16_USERPROFILE"."CIDN"=:B12 AND "PX16_ASSOCIATE"."CIDN"=:B13 AND
"PX16_ASSOCIATE"."OID"="PX16_PCP_USER"."OID" AND "PX16_ASSOCIATE"."ACTIVE"=1 AND
UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_app_context','app_userid')) AND
"PX16_PCP_USER"."USERPROFILEOID"="PX16_USERPROFILE"."OID" AND "PX16_PCP_USER"."CIDN"='C69C1Y' AND
"PX16_PCP_USER"."USERPROFILEOID" IS NOT NULL AND "PX16_PCP_USER"."CIDN"=:B14) OR EXISTS (SELECT /*+ */ 0
FROM TABLE("CRUVPD"."F_STR2TBL_PX16"("PX16_COCODEGROUP"."DEPARTMENT_ACCESS"))
"KOKBF$","PAYX_R16"."SECURITY_GROUP" "PX16_SECURITY_GROUP","PAYX_R16"."COCODEGROUP_SECURITYGROUP"
"PX16_COCODEGRP_SECURITYGRP","PAYX_R16"."SECURITYOBJECT" "PX16_SECURITYOBJECT","PAYX_R16"."ASSOCIATE"
"PX16_ASSOCIATE","PAYX_R16"."COCODEGROUP" "PX16_COCODEGROUP" WHERE :B15='C69C1Y' AND
"PX16_COCODEGROUP"."CIDN"=:B16 AND "PX16_COCODEGROUP"."CO_CODE"=:B17 AND "PX16_ASSOCIATE"."CIDN"='C69C1Y'
AND "PX16_COCODEGROUP"."USEROID"="PX16_ASSOCIATE"."OID" AND
UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_app_context','app_userid')) AND
"PX16_ASSOCIATE"."CIDN"=:B18 AND "PX16_SECURITYOBJECT"."CIDN"='C69C1Y' AND
SUBSTR("PX16_SECURITYOBJECT"."NAME",8,3)=:B19 AND "PX16_SECURITYOBJECT"."CIDN"=:B20 AND
"PX16_COCODEGROUP"."OID"="PX16_COCODEGRP_SECURITYGRP"."COCODEGROUPOID" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"=:B21 AND "PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y' AND
"PX16_SECURITY_GROUP"."CIDN"='C69C1Y' AND "PX16_COCODEGRP_SECURITYGRP"."SECURITYGROUPOID"="PX16_SECURITY_GR
OUP"."OID" AND "PX16_SECURITY_GROUP"."CIDN"=:B22 AND VALUE(KOKBF$)=:B23) OR EXISTS (SELECT /*+ */ 0 FROM
"PAYX_R16"."CUSTOMACCESSDETAIL" "PX16_CUSTOMACCESSDETAIL","PAYX_R16"."SECURITY_GROUP"
"PX16_SECURITY_GROUP","PAYX_R16"."COCODEGROUP_SECURITYGROUP"
"PX16_COCODEGRP_SECURITYGRP","PAYX_R16"."SECURITYOBJECT" "PX16_SECURITYOBJECT","PAYX_R16"."ASSOCIATE"
"PX16_ASSOCIATE","PAYX_R16"."COCODEGROUP" "PX16_COCODEGROUP" WHERE "PX16_COCODEGROUP"."CIDN"='C69C1Y' AND
"PX16_COCODEGROUP"."CIDN"="PX16_SECURITYOBJECT"."CIDN" AND
"PX16_COCODEGROUP"."CO_CODE"=SUBSTR("PX16_SECURITYOBJECT"."NAME",8,3) AND "PX16_ASSOCIATE"."CIDN"='C69C1Y'
AND "PX16_COCODEGROUP"."USEROID"="PX16_ASSOCIATE"."OID" AND
UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_app_context','app_userid')) AND
"PX16_COCODEGROUP"."CIDN"="PX16_ASSOCIATE"."CIDN" AND "PX16_SECURITYOBJECT"."CIDN"='C69C1Y' AND
"PX16_COCODEGROUP"."OID"="PX16_COCODEGRP_SECURITYGRP"."COCODEGROUPOID" AND
"PX16_COCODEGROUP"."CIDN"="PX16_COCODEGRP_SECURITYGRP"."CIDN" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y' AND "PX16_SECURITY_GROUP"."CIDN"='C69C1Y' AND
"PX16_COCODEGRP_SECURITYGRP"."SECURITYGROUPOID"="PX16_SECURITY_GROUP"."OID" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"="PX16_SECURITY_GROUP"."CIDN" AND
"PX16_COCODEGROUP"."CIDN"="PX16_CUSTOMACCESSDETAIL"."CIDN"(+) AND
"PX16_COCODEGROUP"."OID"="PX16_CUSTOMACCESSDETAIL"."COCODEGROUPOID"(+) AND
"PX16_CUSTOMACCESSDETAIL"."CIDN"(+)='C69C1Y' GROUP BY
"PX16_COCODEGROUP"."CIDN","PX16_COCODEGROUP"."CO_CODE","PX16_CUSTOMACCESSDETAIL"."CODE" HAVING
"PX16_COCODEGROUP"."CIDN"=:B24 AND "PX16_COCODEGROUP"."CO_CODE"=:B25 AN)
13 - filter("PX16_USERPROFILE"."CIDN"='C69C1Y')
14 - access("PX16_LINK"."CIDN"='C69C1Y' AND "PX16_LINK"."CHILDOID"='SYS:5:7478' AND
"PX16_LINK"."PARENTOID"="PX16_USERPROFILE"."OID")
filter("PX16_LINK"."CIDN"="PX16_USERPROFILE"."CIDN")
16 - access("PX16_PCP_USER"."CIDN"='C69C1Y' AND "PX16_PCP_USER"."USERPROFILEOID"="PX16_USERPROFILE"."OID"
filter("PX16_PCP_USER"."USERPROFILEOID" IS NOT NULL AND
"PX16_PCP_USER"."CIDN"="PX16_USERPROFILE"."CIDN")
17 - filter("PX16_ASSOCIATE"."ACTIVE"=1 AND UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_ap
p_context','app_userid')))
18 - access("PX16_ASSOCIATE"."OID"="PX16_PCP_USER"."OID" AND "PX16_ASSOCIATE"."CIDN"='C69C1Y')
filter("PX16_ASSOCIATE"."CIDN"="PX16_PCP_USER"."CIDN")
19 - filter("SYS_ALIAS_32"."ACTIVE"=1)
20 - access("SYS_ALIAS_32"."CIDN"='C69C1Y')
filter("SYS_ALIAS_32"."CIDN"="PX16_ASSOCIATE"."CIDN")
22 - access("SYS_ALIAS_15"."CIDN"='C69C1Y' AND "SYS_ALIAS_32"."OID"="SYS_ALIAS_15"."CHECKHISTORYOID")
filter("SYS_ALIAS_32"."CIDN"="SYS_ALIAS_15"."CIDN")
24 - access("SYS_ALIAS_21"."CIDN"='C69C1Y' AND "SYS_ALIAS_21"."CO_CODE"="SYS_ALIAS_32"."CO_CODE")
filter("SYS_ALIAS_21"."CIDN"="SYS_ALIAS_32"."CIDN")
26 - access("SYS_ALIAS_32"."EMPLOYMENTOID"="SYS_ALIAS_11"."OID" AND "SYS_ALIAS_11"."CIDN"='C69C1Y')
filter("SYS_ALIAS_32"."CIDN"="SYS_ALIAS_11"."CIDN")
28 - access("SYS_ALIAS_11"."PERSONOID"="PX16_PERSON"."OID" AND "PX16_PERSON"."CIDN"='C69C1Y')
filter("SYS_ALIAS_11"."CIDN"="PX16_PERSON"."CIDN")
30 - access("SYS_ALIAS_19"."CIDN"(+)='C69C1Y' AND "SYS_ALIAS_19"."EMPLOYMENTOID"(+)="SYS_ALIAS_11"."OID")
filter("SYS_ALIAS_19"."CIDN"(+)="SYS_ALIAS_11"."CIDN")
31 - filter(:B1='C69C1Y' AND :B2=:B3 AND :B4=:B5)
32 - filter("PX16_PAYROLLAGREEMENT"."APPOINTMENTOID"=:B1)
33 - access("PX16_PAYROLLAGREEMENT"."CIDN"=:B1 AND "PX16_PAYROLLAGREEMENT"."COCODEOID"=:B2 AND
"PX16_PAYROLLAGREEMENT"."FILE_NUMBER"=TO_NUMBER(:B3))
34 - filter(:B1='C69C1Y')
38 - filter(UPPER("PX16_USERPROFILE"."NAME")='SUPER USER')
39 - access("PX16_USERPROFILE"."CIDN"='C69C1Y')
filter("PX16_USERPROFILE"."CIDN"=:B1)
40 - access("PX16_LINK"."CIDN"='C69C1Y' AND "PX16_LINK"."PARENTOID"="PX16_USERPROFILE"."OID")
filter("PX16_LINK"."CIDN"=:B1)
42 - access("PX16_PCP_USER"."CIDN"='C69C1Y' AND "PX16_PCP_USER"."USERPROFILEOID"="PX16_USERPROFILE"."OID"
filter("PX16_PCP_USER"."USERPROFILEOID" IS NOT NULL AND "PX16_PCP_USER"."CIDN"=:B1)
43 - filter("PX16_ASSOCIATE"."ACTIVE"=1 AND UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_ap
p_context','app_userid')))
44 - access("PX16_ASSOCIATE"."OID"="PX16_PCP_USER"."OID" AND "PX16_ASSOCIATE"."CIDN"=:B1)
45 - filter(:B1='C69C1Y')
51 - filter("PX16_COCODEGROUP"."CO_CODE"=:B1)
52 - access("PX16_COCODEGROUP"."CIDN"=:B1)
53 - filter(UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_app_context','app_userid')))
54 - access("PX16_COCODEGROUP"."USEROID"="PX16_ASSOCIATE"."OID" AND "PX16_ASSOCIATE"."CIDN"='C69C1Y')
filter("PX16_ASSOCIATE"."CIDN"=:B1)
55 - access("PX16_COCODEGROUP"."OID"="PX16_COCODEGRP_SECURITYGRP"."COCODEGROUPOID" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y')
filter("PX16_COCODEGRP_SECURITYGRP"."CIDN"=:B1 AND "PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y')
56 - access("PX16_COCODEGRP_SECURITYGRP"."SECURITYGROUPOID"="PX16_SECURITY_GROUP"."OID" AND
"PX16_SECURITY_GROUP"."CIDN"='C69C1Y')
filter("PX16_SECURITY_GROUP"."CIDN"=:B1)
58 - access("PX16_SECURITYOBJECT"."CIDN"='C69C1Y')
filter(SUBSTR("PX16_SECURITYOBJECT"."NAME",8,3)=:B1 AND "PX16_SECURITYOBJECT"."CIDN"=:B2)
59 - filter(VALUE(KOKBF$)=:B1)
60 - filter("PX16_COCODEGROUP"."CIDN"=:B1 AND "PX16_COCODEGROUP"."CO_CODE"=:B2 AND
"PX16_CUSTOMACCESSDETAIL"."CODE"=:B3)
64 - access("PX16_COCODEGROUP"."OID"="PX16_CUSTOMACCESSDETAIL"."COCODEGROUPOID"(+) AND
"PX16_COCODEGROUP"."CIDN"="PX16_CUSTOMACCESSDETAIL"."CIDN"(+))
66 - access("PX16_COCODEGROUP"."CO_CODE"=SUBSTR("PX16_SECURITYOBJECT"."NAME",8,3) AND
"PX16_COCODEGROUP"."CIDN"="PX16_SECURITYOBJECT"."CIDN")
68 - access("PX16_SECURITYOBJECT"."CIDN"='C69C1Y')
70 - access("PX16_COCODEGROUP"."CIDN"='C69C1Y')
71 - filter(UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_app_context','app_userid')))
72 - access("PX16_COCODEGROUP"."USEROID"="PX16_ASSOCIATE"."OID" AND "PX16_ASSOCIATE"."CIDN"='C69C1Y')
filter("PX16_COCODEGROUP"."CIDN"="PX16_ASSOCIATE"."CIDN")
73 - filter("PX16_CUSTOMACCESSDETAIL"."CIDN"(+)='C69C1Y')
74 - access("PX16_COCODEGROUP"."OID"="PX16_COCODEGRP_SECURITYGRP"."COCODEGROUPOID" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y')
filter("PX16_COCODEGROUP"."CIDN"="PX16_COCODEGRP_SECURITYGRP"."CIDN" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y')
75 - access("PX16_COCODEGRP_SECURITYGRP"."SECURITYGROUPOID"="PX16_SECURITY_GROUP"."OID" AND
"PX16_SECURITY_GROUP"."CIDN"='C69C1Y')
filter("PX16_COCODEGRP_SECURITYGRP"."CIDN"="PX16_SECURITY_GROUP"."CIDN")
78 - filter('C69C1Y'=:B1)
84 - filter("PX16_COCODEGROUP"."CO_CODE"=:B1)
85 - access("PX16_COCODEGROUP"."CIDN"='C69C1Y')
86 - access("PX16_SECURITYOBJECT"."CIDN"='C69C1Y')
filter(SUBSTR("PX16_SECURITYOBJECT"."NAME",8,3)=:B1 AND
"PX16_COCODEGROUP"."CIDN"="PX16_SECURITYOBJECT"."CIDN")
87 - access("PX16_COCODEGROUP"."OID"="PX16_COCODEGRP_SECURITYGRP"."COCODEGROUPOID" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y')
filter("PX16_COCODEGROUP"."CIDN"="PX16_COCODEGRP_SECURITYGRP"."CIDN" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y')
88 - access("PX16_COCODEGRP_SECURITYGRP"."SECURITYGROUPOID"="PX16_SECURITY_GROUP"."OID" AND
"PX16_SECURITY_GROUP"."CIDN"='C69C1Y')
filter("PX16_COCODEGRP_SECURITYGRP"."CIDN"="PX16_SECURITY_GROUP"."CIDN")
89 - filter(UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_app_context','app_userid')))
90 - access("PX16_COCODEGROUP"."USEROID"="PX16_ASSOCIATE"."OID" AND "PX16_ASSOCIATE"."CIDN"='C69C1Y')
filter("PX16_COCODEGROUP"."CIDN"="PX16_ASSOCIATE"."CIDN")
91 - filter(VALUE(KOKBF$) IS NULL)
93 - filter(COUNT(DISTINCT "PX16_CUSTOMACCESSDETAIL"."CODE")=0)
95 - filter('C69C1Y'=:B1)
98 - access("PX16_COCODEGROUP"."OID"="PX16_CUSTOMACCESSDETAIL"."COCODEGROUPOID"(+) AND
"PX16_COCODEGROUP"."CIDN"="PX16_CUSTOMACCESSDETAIL"."CIDN"(+))
101 - filter("PX16_COCODEGROUP"."CO_CODE"=:B1)
102 - access("PX16_COCODEGROUP"."CIDN"='C69C1Y')
103 - access("PX16_SECURITYOBJECT"."CIDN"='C69C1Y')
filter(SUBSTR("PX16_SECURITYOBJECT"."NAME",8,3)=:B1 AND
"PX16_COCODEGROUP"."CIDN"="PX16_SECURITYOBJECT"."CIDN")
104 - filter(UPPER("PX16_ASSOCIATE"."NAME")=UPPER(SYS_CONTEXT('payx_r16_app_context','app_userid')))
105 - access("PX16_COCODEGROUP"."USEROID"="PX16_ASSOCIATE"."OID" AND "PX16_ASSOCIATE"."CIDN"='C69C1Y')
filter("PX16_COCODEGROUP"."CIDN"="PX16_ASSOCIATE"."CIDN")
106 - filter("PX16_CUSTOMACCESSDETAIL"."CIDN"(+)='C69C1Y')
107 - access("PX16_COCODEGROUP"."OID"="PX16_COCODEGRP_SECURITYGRP"."COCODEGROUPOID" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y')
filter("PX16_COCODEGROUP"."CIDN"="PX16_COCODEGRP_SECURITYGRP"."CIDN" AND
"PX16_COCODEGRP_SECURITYGRP"."CIDN"='C69C1Y')
108 - access("PX16_COCODEGRP_SECURITYGRP"."SECURITYGROUPOID"="PX16_SECURITY_GROUP"."OID" AND
"PX16_SECURITY_GROUP"."CIDN"='C69C1Y')
filter("PX16_COCODEGRP_SECURITYGRP"."CIDN"="PX16_SECURITY_GROUP"."CIDN")
277 rows selected.
Really need advice on it.Without formatting using [ PRE ] and [ /PRE ] tags it is nearly impossible to read much less provide help.
But what is it you hope to accomplish by breaking it up into smaller views?
Improvements in ease of maintenance will likely be offset by poorer performance. -
[SOLVED] Random kernel panics during boot (Waiting for UDev uevents..)
Update 2012-03-31: Workaround confirmed to work, see tenthirteen's post.
Update 2012-02-03: I've narrowed down the problem to the 3.x kernels. Downgrading to kernel26-2.6.38.5-1, with the other packages up-to-date (using nouveau instead of nvidia driver), solves the problem. Still, I still consider this a problem since it forces me to use an older kernel, so if anyone has any idea how to find the problem I would be very thankful!
When I came back home after the summer vacations I did a huge upgrade with pacman -Syu (of course I read the announcements before). This included linux (3.0.3-1) from kernel26 (2.6.38.5-1) and udev (167-2 -> 173-3). After this point, the boot process randomly fails from time to time; today I had to restart more than 20 times before my machine would boot successfully.
It always occurs during "Waiting for UDev uvents to be processed". Some of the errors are:
1. The computer freezes when the message is shown (cursor stops to blink).
2. Nothing happens for a long time, then Waiting for UDev uvents to be processed [ FAIL ]s.
3. Short and long error messages that look similar to this guy's (except for the last line).
I greped for some of the error messages in /var/log but they don't seem to be logged, so the examples below are from my handwritten notes and thus not very complete (there are a lot of other error messages except these lines). It's also possible that there are some mistakes. Note that they're from different boots.
BUG: Soft lockup - CPU#1 stuck for 23 s! [modprobe:256]
BUG: Unable to handle kernel
--[End ...]--
note: udevd[225] exited with preempt_count 2
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0147299
BUG: Unable to handle kernel paging request at f8d20076
Code: Bad EIP value.
EIP: ...
CRZ: ...
--[End ...]--
Kernel panic - not syncing: Attempted to kill the idle task!
Lock: Bad EIP value
Note: modprobe [296] exited with preempt_count 3
WARNING: at kernel/watchdog.c:240 watchdog-overflow-callback+0xac/...
BUG: Unable to handle kernel NULL pointer dereference at 00000286
BUG: Unable to handle kernel NULL pointer dereference at (null)
These errors are seemingly arbitrary which makes it very hard to find the problem. Sometimes it works without a single complaint, sometimes it says something about "No caching mode page present, Assuming drive cache: write through", and sometimes I get different errors (the examples above are only from today!). As you can imagine, it gets pretty annoying.
So far I've tried to:
* Use the fallback mode - nope.
* Rerun mkinitcpio -p linux - nope.
* Append noapic and nomodeset to the kernel in GRUB - nope.
* Install and try kernel26-lts - seems to work, although I don't understand what other differences there are (e.g., it doesn't start X). At least this seems to suggest that it's not a hardware problem.
* Unplug all USB devices before boot - sometimes works, sometimes not. Doesn't seem to be a direct connection.
* Remove my custom settings in /etc/modprobe.d - nope.
* A lot of other things I've forgotten.
Edit: I forgot to mention, once it's booted, the system works perfectly fine. No kernel panics etc. That's the second reason why I suspect it's not a hardware failure.
I've been thinking about trying to downgrade the kernel and udev, but with the renaming and all dependencies I'm not sure how to do that.
Since I've run out of ideas how to troubleshoot this issue, I would appreciate if I could get some suggestions here. I've search around and found similar posts but no solution that works for me.
Finally, here are some more information.
uname -a:
Linux archon 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux
The packages that I upgraded with pacman -Syu that day (removed most KDE packages from the list):
[2011-08-26 15:14] Running 'pacman-color -Syu'
[2011-08-26 15:14] synchronizing package lists
[2011-08-26 15:18] Running 'pacman-color -Sy pacman'
[2011-08-26 15:18] synchronizing package lists
[2011-08-26 15:18] upgraded linux-api-headers (2.6.38.1-1 -> 3.0.1-1)
[2011-08-26 15:19] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2011-08-26 15:19] Generating locales...
[2011-08-26 15:19] en_US.UTF-8... done
[2011-08-26 15:19] en_US.ISO-8859-1... done
[2011-08-26 15:19] sv_SE.UTF-8... done
[2011-08-26 15:19] sv_SE.ISO-8859-1... done
[2011-08-26 15:19] Generation complete.
[2011-08-26 15:19] upgraded glibc (2.13-5 -> 2.14-5)
[2011-08-26 15:19] upgraded pacman (3.5.3-1 -> 3.5.4-4)
[2011-08-26 15:27] Running 'pacman-color -Syu'
[2011-08-26 15:27] synchronizing package lists
[2011-08-26 15:27] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Rsn linuxwacom-bamboo-cth-ctl'
[2011-08-26 15:29] removed linuxwacom-bamboo-cth-ctl (0.10.99.1-1)
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:53] Running 'pacman-color -Syu'
[2011-08-26 15:53] synchronizing package lists
[2011-08-26 15:54] starting full system upgrade
[2011-08-26 16:03] warning: /etc/krb5.conf saved as /etc/krb5.conf.pacsave
[2011-08-26 16:03] removed heimdal (1.3.3-4)
[2011-08-26 16:03] removed eigen (2.0.15-1)
[2011-08-26 16:03] removed python2-qt (4.8.3-1)
[2011-08-26 16:03] removed kernel26 (2.6.38.5-1)
[2011-08-26 16:04] removed kernel26-headers (2.6.38.5-1)
[2011-08-26 16:04] removed libreoffice (3.3.2-2)
[2011-08-26 16:04] upgraded readline (6.2.001-1 -> 6.2.001-2)
[2011-08-26 16:04] upgraded bash (4.2.008-1 -> 4.2.010-1)
[2011-08-26 16:04] upgraded attr (2.4.44-3 -> 2.4.46-1)
[2011-08-26 16:04] upgraded acl (2.2.49-2 -> 2.2.51-1)
[2011-08-26 16:04] upgraded rsync (3.0.8-1 -> 3.0.8-2)
[2011-08-26 16:04] upgraded abs (2.4.2-1 -> 2.4.3-1)
[2011-08-26 16:04] upgraded gcc-libs (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:04] upgraded zlib (1.2.5-3 -> 1.2.5-4)
[2011-08-26 16:04] upgraded icu (4.6.1-1 -> 4.8.1-1)
[2011-08-26 16:04] upgraded boost-libs (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:04] upgraded libmysqlclient (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded mysql-clients (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] hostname and {,yp,nis}domainname has moved:
[2011-08-26 16:04] ----------
[2011-08-26 16:04] hostname is now in coreutils
[2011-08-26 16:04] domainname is now in yp-tools
[2011-08-26 16:04] their functionality might have changed slightly
[2011-08-26 16:04]
[2011-08-26 16:04] dnsdomainname remains in net-tools
[2011-08-26 16:04] ----------
[2011-08-26 16:04] upgraded net-tools (1.60-14 -> 1.60-18)
[2011-08-26 16:04] warning: directory permissions differ on var/lib/mysql/
filesystem: 755 package: 700
[2011-08-26 16:04] upgraded mysql (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded libpng (1.4.5-1 -> 1.4.8-1)
[2011-08-26 16:04] upgraded sqlite3 (3.7.6.1-1 -> 3.7.7.1-1)
[2011-08-26 16:04] upgraded run-parts (3.4.1-1 -> 3.4.4-1)
[2011-08-26 16:04] upgraded db (5.1.25-1 -> 5.2.28-1)
[2011-08-26 16:04] installed libgssglue (0.3-1)
[2011-08-26 16:04] installed libtirpc (0.2.2-2)
[2011-08-26 16:04] upgraded pam (1.1.3-1 -> 1.1.4-1)
[2011-08-26 16:04] Fixing gshadow file ...
[2011-08-26 16:04] upgraded shadow (4.1.4.3-1 -> 4.1.4.3-2)
[2011-08-26 16:04] upgraded gmp (5.0.1-2 -> 5.0.2-3)
[2011-08-26 16:04] upgraded libcap (2.20-1 -> 2.22-1)
[2011-08-26 16:04] upgraded coreutils (8.12-1 -> 8.12-3)
[2011-08-26 16:04] Updating certificates. This might take a while...
[2011-08-26 16:04] upgraded ca-certificates (20090814+nmu2-1 -> 20110421-3)
[2011-08-26 16:04] upgraded pcre (8.12-1 -> 8.13-2)
[2011-08-26 16:04] upgraded glib2 (2.28.6-1 -> 2.28.8-1)
[2011-08-26 16:04] upgraded iana-etc (2.30-1 -> 2.30-2)
[2011-08-26 16:04] warning: /etc/fstab installed as /etc/fstab.pacnew
[2011-08-26 16:04] warning: directory permissions differ on run/
filesystem: 1777 package: 755
[2011-08-26 16:04] upgraded filesystem (2011.04-1 -> 2011.08-1)
[2011-08-26 16:04] upgraded dbus-core (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:04] upgraded xproto (7.0.21-1 -> 7.0.22-1)
[2011-08-26 16:04] upgraded libx11 (1.4.3-2 -> 1.4.4-1)
[2011-08-26 16:05] upgraded dbus (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:05] upgraded freetype2 (2.4.4-2 -> 2.4.6-1)
[2011-08-26 16:05] upgraded libxfont (1.4.3-1 -> 1.4.4-1)
[2011-08-26 16:05] upgraded util-linux (2.19-4 -> 2.19.1-3)
[2011-08-26 16:05] upgraded module-init-tools (3.12-2 -> 3.16-1)
[2011-08-26 16:05] ATTENTION UDEV:
[2011-08-26 16:05] ----------
[2011-08-26 16:05] Kernel 2.6.32 or newer is now required.
[2011-08-26 16:05] --
[2011-08-26 16:05] OSS emulation modules are not loaded by default, add to rc.conf if needed.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch specific cd symlinks are now no longer created.
[2011-08-26 16:05] --
[2011-08-26 16:05] cd and net persistent rules will no longer be autogenerated,
[2011-08-26 16:05] see <https://wiki.archlinux.org/index.php/Udev> for details.
[2011-08-26 16:05] --
[2011-08-26 16:05] Errors are now logged (possibly to the console) by default.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and
[2011-08-26 16:05] blacklisting in MODULES no longer works.
[2011-08-26 16:05] See 'man modprobe.conf' for a replacement to blacklisting.
[2011-08-26 16:05] To disable a module mod1 on the kernel command line, use
[2011-08-26 16:05] mod1.disable=1
[2011-08-26 16:05] or
[2011-08-26 16:05] modprobe.blacklist=mod1
[2011-08-26 16:05] --
[2011-08-26 16:05] The following modules are no longer unconditionally loaded:
[2011-08-26 16:05] pcspkr irtty-sir analog lp ppdev ide-generic
[2011-08-26 16:05] Add them to MODULES in rc.conf if you need them.
[2011-08-26 16:05] --
[2011-08-26 16:05] Support for non-devtmpfs self-compiled kernels have been moved to udev-compat.
[2011-08-26 16:05] --
[2011-08-26 16:05] Blacklisting of framebuffer devices has moved from /etc/modprobe.d to
[2011-08-26 16:05] /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it
[2011-08-26 16:05] takes precedence.
[2011-08-26 16:05] --
[2011-08-26 16:05] kbd and rtc devices are no longer world readable.
[2011-08-26 16:05] --
[2011-08-26 16:05] rtc is no longer in the audio group and fb devices are no longer in
[2011-08-26 16:05] the video group, as permissions and ownership of fb devices are controlled
[2011-08-26 16:05] by X.
[2011-08-26 16:05] ---------------
[2011-08-26 16:05] upgraded udev (167-2 -> 173-3)
[2011-08-26 16:05] upgraded libdrm (2.4.25-1 -> 2.4.26-1)
[2011-08-26 16:05] upgraded pixman (0.20.2-1 -> 0.22.2-1)
[2011-08-26 16:05] upgraded libgpg-error (1.9-3 -> 1.10-1)
[2011-08-26 16:05] upgraded libgcrypt (1.4.6-3 -> 1.5.0-1)
[2011-08-26 16:05] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
[2011-08-26 16:05] upgraded xorg-server-common (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded xorg-server (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded nvidia-173xx-utils (173.14.30-1 -> 173.14.31-1)
[2011-08-26 16:05] upgraded libxext (1.2.0-1 -> 1.3.0-1)
[2011-08-26 16:05] upgraded libxrandr (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:05] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:05] upgraded libxi (1.4.2-1 -> 1.4.3-1)
[2011-08-26 16:05] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
[2011-08-26 16:05] upgraded xdg-utils (1.1.0rc1-2 -> 1.1.0rc1-3)
[2011-08-26 16:05] upgraded qt (4.7.2-6 -> 4.7.3-3)
[2011-08-26 16:05] installed libssh2 (1.2.9-1)
[2011-08-26 16:05] upgraded curl (7.21.6-1 -> 7.21.7-1)
[2011-08-26 16:05] upgraded raptor (2.0.2-1 -> 2.0.4-1)
[2011-08-26 16:05] upgraded mpfr (3.0.1-1 -> 3.0.1.p4-2)
[2011-08-26 16:05] upgraded rasqal (1:0.9.21-1 -> 1:0.9.27-1)
[2011-08-26 16:05] upgraded binutils (2.21-7 -> 2.21.1-2)
[2011-08-26 16:05] upgraded libmpc (0.9-1 -> 0.9-2)
[2011-08-26 16:05] upgraded isl (0.06-1 -> 0.06-2)
[2011-08-26 16:05] upgraded cloog (0.16.2-1 -> 0.16.2-2)
[2011-08-26 16:05] upgraded ppl (0.11.2-1 -> 0.11.2-2)
[2011-08-26 16:05] upgraded gcc (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:05] upgraded libtool (2.4-3 -> 2.4-4)
[2011-08-26 16:05] upgraded redland (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded redland-storage-virtuoso (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded soprano (2.6.0-5 -> 2.7.0-1)
[2011-08-26 16:05] upgraded akonadi (1.5.2-1 -> 1.6.0-2)
[2011-08-26 16:05] upgraded dialog (1.1_20110302-1 -> 1.1_20110707-1)
[2011-08-26 16:05] upgraded psmisc (22.13-1 -> 22.14-1)
[2011-08-26 16:05] upgraded alsa-utils (1.0.24.2-1 -> 1.0.24.2-3)
[2011-08-26 16:06] upgraded exiv2 (0.21.1-1 -> 0.21.1-2)
[2011-08-26 16:06] upgraded strigi (git20110405-1 -> 0.7.5-4)
[2011-08-26 16:06] upgraded xz (5.0.2-1 -> 5.0.3-1)
[2011-08-26 16:06] upgraded libsasl (2.1.23-5 -> 2.1.23-7)
[2011-08-26 16:06] upgraded libldap (2.4.24-1 -> 2.4.26-3)
[2011-08-26 16:06] upgraded keyutils (1.4-1 -> 1.5.2-1)
[2011-08-26 16:06] installed krb5 (1.9.1-3)
[2011-08-26 16:06] upgraded shared-desktop-ontologies (0.6.0-1 -> 0.7.1-1)
[2011-08-26 16:06] upgraded libdbusmenu-qt (0.8.2-1 -> 0.8.3-1)
[2011-08-26 16:06] upgraded grantlee (0.1.8-1 -> 0.1.9-1)
[2011-08-26 16:06] upgraded aspell (0.60.6-5 -> 0.60.6.1-1)
[2011-08-26 16:06] upgraded dbus-glib (0.92-1 -> 0.94-2)
[2011-08-26 16:06] upgraded hunspell (1.2.15-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded enchant (1.6.0-1 -> 1.6.0-3)
[2011-08-26 16:06] upgraded libogg (1.2.2-1 -> 1.3.0-1)
[2011-08-26 16:06] upgraded flac (1.2.1-2 -> 1.2.1-3)
[2011-08-26 16:06] upgraded libsndfile (1.0.24-1 -> 1.0.25-1)
[2011-08-26 16:06] upgraded libpulse (0.9.22-2 -> 0.9.23-1)
[2011-08-26 16:06] installed libqzeitgeist (0.7.0-1)
[2011-08-26 16:06] upgraded pango (1.28.4-2 -> 1.28.4-3)
[2011-08-26 16:06] upgraded gstreamer0.10 (0.10.32-1 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base-plugins (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded phonon-gstreamer (4.5.0-1 -> 4.5.1-1)
[2011-08-26 16:06] upgraded sdl (1.2.14-6 -> 1.2.14-7)
[2011-08-26 16:06] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded x264 (20110327-1 -> 20110617-1)
[2011-08-26 16:06] upgraded libvpx (0.9.6-2 -> 0.9.7.p1-1)
[2011-08-26 16:06] upgraded libva (1.0.12-1 -> 1.0.14-1)
[2011-08-26 16:06] installed rtmpdump (2.4-1)
[2011-08-26 16:06] upgraded ffmpeg (20110330-1 -> 20110724-1)
[2011-08-26 16:06] upgraded cifs-utils (4.9-2 -> 4.9-3)
[2011-08-26 16:06] upgraded smbclient (3.5.8-2 -> 3.6.0-4)
[2011-08-26 16:06] upgraded mesa (7.10.2-2 -> 7.11-1)
[2011-08-26 16:06] upgraded libsamplerate (0.1.7-1 -> 0.1.8-1)
[2011-08-26 16:06] upgraded jack (0.120.1-1 -> 0.121.2-2)
[2011-08-26 16:06] upgraded fluidsynth (1.1.3-2 -> 1.1.4-1)
[2011-08-26 16:06] upgraded libass (0.9.11-1 -> 0.9.13-1)
[2011-08-26 16:06] upgraded libproxy (0.4.6-6 -> 0.4.7-1)
[2011-08-26 16:06] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-3)
[2011-08-26 16:06] upgraded v4l-utils (0.8.3-1 -> 0.8.5-1)
[2011-08-26 16:06] upgraded taglib (1.7-1 -> 1.7-3)
[2011-08-26 16:06] upgraded libdvbpsi (0.1.7-1 -> 0.2.0-1)
[2011-08-26 16:06] upgraded libebml (1.2.0-1 -> 1.2.1-1)
[2011-08-26 16:06] upgraded libmatroska (1.1.0-1 -> 1.2.0-1)
[2011-08-26 16:06] upgraded libmodplug (0.8.8.1-1 -> 0.8.8.3-1)
[2011-08-26 16:06] upgraded libmpeg2 (0.5.1-1 -> 0.5.1-3)
[2011-08-26 16:06] upgraded libmtp (1.0.2-2 -> 1.1.0-1)
[2011-08-26 16:06] installed libupnp (1.6.13-1)
[2011-08-26 16:06] upgraded vlc (1.1.9-1 -> 1.1.11-4)
[2011-08-26 16:06] upgraded phonon-vlc (0.4.0-1 -> 0.4.1-1)
[2011-08-26 16:06] upgraded phonon (4.5.0-1 -> 4.5.55-1)
[2011-08-26 16:06] upgraded upower (0.9.10-1 -> 0.9.12-1)
[2011-08-26 16:07] upgraded device-mapper (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded parted (2.3-1 -> 3.0-3)
[2011-08-26 16:07] upgraded lvm2 (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded eject (2.1.5-5 -> 2.1.5-7)
[2011-08-26 16:07] upgraded udisks (1.0.3-2 -> 1.0.3-6)
[2011-08-26 16:07] upgraded libxcursor (1.1.11-1 -> 1.1.12-1)
[2011-08-26 16:07] upgraded ntrack (1:13-1 -> 1:13-2)
[2011-08-26 16:07] upgraded libssh (0.4.8-1 -> 0.5.1-1)
[2011-08-26 16:07] upgraded oxygen-icons (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:07] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-08-26 16:07] installed qjson (0.7.1-1)
[2011-08-26 16:08] upgraded amarok (2.4.0-4 -> 2.4.3-1)
[2011-08-26 16:08] upgraded apr (1.4.2-1 -> 1.4.5-1)
[2011-08-26 16:08] upgraded apr-util (1.3.10-2 -> 1.3.12-2)
[2011-08-26 16:08] upgraded atk (2.0.0-1 -> 2.0.1-1)
[2011-08-26 16:08] upgraded avahi (0.6.30-2 -> 0.6.30-4)
[2011-08-26 16:08] installed eigen2 (2.0.16-1)
[2011-08-26 16:08] upgraded libffi (3.0.9-1 -> 3.0.10-1)
[2011-08-26 16:08] upgraded python (3.2-2 -> 3.2.1-1)
[2011-08-26 16:08] installed sip (4.12.4-1)
[2011-08-26 16:08] installed pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded python2 (2.7.1-9 -> 2.7.2-2)
[2011-08-26 16:08] upgraded python2-sip (4.12.1-1 -> 4.12.4-1)
[2011-08-26 16:08] upgraded dbus-python (0.83.1-2 -> 0.84.0-1)
[2011-08-26 16:08] installed python2-pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded glew (1.5.8-1 -> 1.6.0-1)
[2011-08-26 16:08] upgraded blas (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded lapack (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded python2-numpy (1.5.1-2 -> 1.6.0-1)
[2011-08-26 16:08] upgraded avogadro (1.0.3-1 -> 1.0.3-3)
[2011-08-26 16:08] upgraded bison (2.4.3-1 -> 2.5-1)
[2011-08-26 16:08] upgraded bluez (4.93-1 -> 4.96-1)
[2011-08-26 16:08] upgraded boost (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:08] upgraded cabextract (1.3-1 -> 1.4-1)
[2011-08-26 16:08] upgraded libsigc++ (2.2.9-1 -> 2.2.10-1)
[2011-08-26 16:08] upgraded cairomm (1.9.8-1 -> 1.10.0-1)
[2011-08-26 16:08] upgraded chmlib (0.40-1 -> 0.40-2)
[2011-08-26 16:08] installed nettle (2.2-1)
[2011-08-26 16:08] upgraded gnutls (2.12.3-1 -> 3.0.1-1)
[2011-08-26 16:08] upgraded libcups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:08] upgraded gdk-pixbuf2 (2.23.3-1 -> 2.23.5-1)
[2011-08-26 16:08] upgraded gtk-update-icon-cache (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:08] upgraded gtk2 (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:09] upgraded nspr (4.8.7-1 -> 4.8.9-1)
[2011-08-26 16:09] upgraded nss (3.12.9-1 -> 3.12.11-1)
[2011-08-26 16:09] upgraded libevent (2.0.10-1 -> 2.0.12-1)
[2011-08-26 16:09] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
[2011-08-26 16:10] upgraded ttf-dejavu (2.32-2 -> 2.33-1)
[2011-08-26 16:10] upgraded chromium (11.0.696.57-1 -> 13.0.782.215-1)
[2011-08-26 16:10] upgraded cln (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:10] upgraded clucene (0.9.21b-1 -> 2.3.3.4-1)
[2011-08-26 16:11] upgraded cmake (2.8.4-1 -> 2.8.5-1)
[2011-08-26 16:11] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
[2011-08-26 16:11] upgraded cryptsetup (1.2.0-1 -> 1.3.1-2)
[2011-08-26 16:11] upgraded poppler (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:11] daemon script has been renamed to /etc/rc.d/cupsd
[2011-08-26 16:11] change your entry in /etc/rc.conf
[2011-08-26 16:11] upgraded cups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:11] upgraded cvs (1.11.23-6 -> 1.11.23-7)
[2011-08-26 16:11] upgraded dash (0.5.6.1-2 -> 0.5.7-2)
[2011-08-26 16:11] upgraded dconf (0.7.3-2 -> 0.8.0-1)
[2011-08-26 16:11] upgraded dcron (4.4-2 -> 4.5-2)
[2011-08-26 16:11] upgraded diffutils (3.0-2 -> 3.1-1)
[2011-08-26 16:11] upgraded libksba (1.0.8-1 -> 1.2.0-1)
[2011-08-26 16:11] upgraded libassuan (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:11] upgraded dirmngr (1.1.0-1 -> 1.1.0-3)
[2011-08-26 16:11] upgraded dri2proto (2.3-1 -> 2.6-1)
[2011-08-26 16:11] upgraded fakeroot (1.15.1-1 -> 1.17-1)
[2011-08-26 16:11] upgraded file (5.06-1 -> 5.08-1)
[2011-08-26 16:11] upgraded startup-notification (0.10-2 -> 0.12-1)
[2011-08-26 16:11] upgraded mime-types (1.0-3 -> 8-1)
[2011-08-26 16:11] upgraded libnotify (0.7.2-1 -> 0.7.3-1)
[2011-08-26 16:11] upgraded firefox (4.0.1-1 -> 6.0-1)
[2011-08-26 16:11] upgraded flashplugin (10.2.159.1-2 -> 10.3.183.7-1)
[2011-08-26 16:11] - The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
[2011-08-26 16:11] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
[2011-08-26 16:11] have been removed from @INC.
[2011-08-26 16:11] - The script/binary directories are now /usr/bin/*_perl instead of
[2011-08-26 16:11] /usr/lib/perl5/*_perl/bin which will be eventually removed.
[2011-08-26 16:11] upgraded perl (5.12.3-1 -> 5.14.1-3)
[2011-08-26 16:11] upgraded foomatic-db (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-filters (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded fortune-mod (1.99.1-4 -> 1.99.1-5)
[2011-08-26 16:12] upgraded fpc (2.4.2-1 -> 2.4.4-3)
[2011-08-26 16:12] upgraded gawk (3.1.8-2 -> 4.0.0-1)
[2011-08-26 16:12] upgraded gc (7.1-1 -> 7.1-3)
[2011-08-26 16:12] upgraded gcc-fortran (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:12] upgraded gdb (7.2-2 -> 7.3-2)
[2011-08-26 16:12] upgraded libftdi (0.18-2 -> 0.19-1)
[2011-08-26 16:12] upgraded lirc-utils (1:0.9.0-2 -> 1:0.9.0-6)
[2011-08-26 16:12] installed mpg123 (1.13.3-2)
[2011-08-26 16:12] upgraded mplayer (33159-1 -> 34007-1)
[2011-08-26 16:12] upgraded gnome-mplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded gecko-mediaplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded libggz (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ggz-client-libs (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ghostscript (9.02-1 -> 9.04-5)
[2011-08-26 16:12] upgraded pygobject-devel (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygobject (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygtk (2.24.0-1 -> 2.24.0-2)
[2011-08-26 16:12] upgraded gimp (2.6.11-5 -> 2.6.11-6)
[2011-08-26 16:12] upgraded git (1.7.5-1 -> 1.7.6.1-1)
[2011-08-26 16:12] upgraded glibmm (2.28.0-1 -> 2.28.2-1)
[2011-08-26 16:12] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-4)
[2011-08-26 16:12] upgraded glproto (1.4.12-1 -> 1.4.14-1)
[2011-08-26 16:12] upgraded gnugo (3.8-1 -> 3.8-2)
[2011-08-26 16:12] upgraded gnupg (1.4.11-2 -> 1.4.11-3)
[2011-08-26 16:12] upgraded pinentry (0.8.1-1 -> 0.8.1-3)
[2011-08-26 16:12] upgraded gnupg2 (2.0.17-1 -> 2.0.18-1)
[2011-08-26 16:12] upgraded wxgtk (2.8.12-1 -> 2.8.12.1-1)
[2011-08-26 16:12] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
[2011-08-26 16:12] Updating TeX tree...
[2011-08-26 16:12] mktexlsr: Updating /etc/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2011-08-26 16:13] mktexlsr: Updating /var/lib/texmf/ls-R...
[2011-08-26 16:13] mktexlsr: Done.
[2011-08-26 16:13] upgraded gnuplot (4.4.2-2 -> 4.4.3-1)
[2011-08-26 16:13] upgraded gtkmm (2.24.0-1 -> 2.24.2-1)
[2011-08-26 16:13] upgraded gparted (0.8.0-2 -> 0.9.0-3)
[2011-08-26 16:13] upgraded gpgme (1.3.0-1 -> 1.3.1-1)
[2011-08-26 16:13] upgraded gpsd (2.96-1 -> 3.0-3)
[2011-08-26 16:13] upgraded graphicsmagick (1.3.12-1 -> 1.3.12-2)
[2011-08-26 16:13] upgraded grep (2.7-1 -> 2.9-1)
[2011-08-26 16:13] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-26 16:13] upgraded grub (0.97-17 -> 0.97-20)
[2011-08-26 16:13] upgraded gsl (1.14-1 -> 1.15-1)
[2011-08-26 16:13] upgraded vim-runtime (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p290-1)
[2011-08-26 16:13] Updating desktop and mime database...done.
[2011-08-26 16:13] upgraded gvim (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded hdf5 (1.8.6-1 -> 1.8.7-1)
[2011-08-26 16:13] upgraded heirloom-mailx (12.5-1 -> 12.5-2)
[2011-08-26 16:13] upgraded htop (0.9-1 -> 0.9-2)
[2011-08-26 16:13] installed lcms2 (2.2-1)
[2011-08-26 16:13] upgraded imagemagick (6.6.9.4-1 -> 6.7.1.6-1)
[2011-08-26 16:13] installed iproute2 (2.6.39-1)
[2011-08-26 16:13] upgraded kbd (1.15.2-1 -> 1.15.3-1)
[2011-08-26 16:13] warning: /etc/inittab installed as /etc/inittab.pacnew
[2011-08-26 16:13] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2011-08-26 16:13] Blacklisting of modules is no longer supported in rc.conf,
[2011-08-26 16:13] please add blacklist entries to /etc/modprobe.d/ instead.
[2011-08-26 16:13] VERBOSE= in rc.conf no longer has any effect.
[2011-08-26 16:13] Please append 'quiet' to your kernel command line.
[2011-08-26 16:13] upgraded initscripts (2011.04.1-2 -> 2011.07.3-1)
[2011-08-26 16:13] upgraded poppler-glib (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:13] upgraded inkscape (0.48.1-2 -> 0.48.2-1)
[2011-08-26 16:13] upgraded irssi (0.8.15-4 -> 0.8.15-5)
[2011-08-26 16:13] upgraded jfsutils (1.1.14-2 -> 1.1.15-2)
[2011-08-26 16:14] upgraded jre (6u25-1 -> 7-3)
[2011-08-26 16:14] upgraded libdmtx (0.7.2-2 -> 0.7.4-1)
[2011-08-26 16:14] installed qrencode (3.1.1-2)
[2011-08-26 16:14] installed prison (1.0-1)
[2011-08-26 16:14] upgraded libedit (20110227_3.0-1 -> 20110802_3.0-1)
[2011-08-26 16:14] upgraded openssh (5.8p2-1 -> 5.8p2-9)
[2011-08-26 16:14] upgraded lm_sensors (3.3.0-1 -> 3.3.1-2)
[2011-08-26 16:14] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
[2011-08-26 16:14] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2011-08-26 16:14] installed libkexiv2 (4.7.0-2)
[2011-08-26 16:15] upgraded qscintilla (2.5.1-1 -> 2.5.1-2)
[2011-08-26 16:15] installed ocaml (3.12.1-1)
[2011-08-26 16:15] installed libkipi (4.7.0-2)
[2011-08-26 16:16] upgraded sane (1.0.22-1 -> 1.0.22-2)
[2011-08-26 16:16] installed libksane (4.7.0-2)
[2011-08-26 16:16] installed libkdcraw (4.7.0-2)
[2011-08-26 16:16] upgraded poppler-qt (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:16] upgraded libidn (1.21-1 -> 1.22-1)
[2011-08-26 16:16] upgraded qt3 (3.3.8-19 -> 3.3.8-20)
[2011-08-26 16:16] upgraded libktorrent (1.1.1-1 -> 1.1.2-1)
[2011-08-26 16:16] installed libmms (0.6.2-1)
[2011-08-26 16:16] upgraded libgadu (1.10.1-1 -> 1.11.0-1)
[2011-08-26 16:16] installed ortp (0.16.5-1)
[2011-08-26 16:16] installed mediastreamer (2.7.3-3)
[2011-08-26 16:17] upgraded qwt (5.2.1-1 -> 6.0.0-1)
[2011-08-26 16:17] upgraded neon (0.29.3-2 -> 0.29.6-2)
[2011-08-26 16:17] upgraded subversion (1.6.15-1 -> 1.6.17-6)
[2011-08-26 16:17] upgraded linux-firmware (20110227-1 -> 20110727-1)
[2011-08-26 16:17] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.5-1)
[2011-08-26 16:17] upgraded mkinitcpio (0.6.11-1 -> 0.7.2-1)
[2011-08-26 16:18] >>> Updating module dependencies. Please wait ...
[2011-08-26 16:18] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-26 16:18] ==> Building image from preset: 'default'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [autodetect]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-26 16:18] 7278 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] ==> Building image from preset: 'fallback'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-26 16:18] 23389 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] installed linux (3.0.3-1)
[2011-08-26 16:18] installed linux-headers (3.0.3-1)
[2011-08-26 16:18] upgraded koffice-servicetypes (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-libs (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-templates (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-plugins (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded koffice-krita (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded ktorrent (4.1.1-1 -> 4.1.2-1)
[2011-08-26 16:19] upgraded kwebkitpart (1.1-1 -> 1.1.1-1)
[2011-08-26 16:19] upgraded less (443-1 -> 444-1)
[2011-08-26 16:19] upgraded usbmuxd (1.0.6-2 -> 1.0.7-2)
[2011-08-26 16:19] upgraded libimobiledevice (1.1.0-1 -> 1.1.1-2)
[2011-08-26 16:19] upgraded libgpod (0.8.0-2 -> 0.8.2-2)
[2011-08-26 16:19] upgraded libgsf (1.14.20-1 -> 1.14.21-1)
[2011-08-26 16:19] upgraded liblqr (0.4.1-1 -> 0.4.1-2)
[2011-08-26 16:19] installed libreoffice-en-US (3.4.2-2)
[2011-08-26 16:19] installed libtextcat (2.2-8)
[2011-08-26 16:19] * see https://wiki.archlinux.org/index.php/LibreOffice
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] LibreOffice has been split into several packages:
[2011-08-26 16:19] - libreoffice-common
[2011-08-26 16:19] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
[2011-08-26 16:19] - libreoffice-{gnome,kde4} - desktop integration plugins
[2011-08-26 16:19] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
[2011-08-26 16:19] the LibreOffice APIs and for creating
[2011-08-26 16:19] extensions (UNO components).
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] * you need to install at least one libreoffice-langpack
[2011-08-26 16:19] * you may want to pacman -Ss libreoffice-extensions
[2011-08-26 16:19] to see what additional extensions are prepared to install
[2011-08-26 16:19] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
[2011-08-26 16:19] for spell checking
[2011-08-26 16:19] * make sure you have installed some ttf font (ttf-dejavu recommended)
[2011-08-26 16:19] installed libreoffice-common (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-base (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-calc (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-draw (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-impress (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-math (3.4.2-2)
[2011-08-26 16:19] upgraded libwpd (0.9.1-1 -> 0.9.2-1)
[2011-08-26 16:19] installed libwps (0.2.2-1)
[2011-08-26 16:19] installed libreoffice-writer (3.4.2-2)
[2011-08-26 16:19] upgraded libreoffice-extension-ct2n (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] The jdk package is licensed software.
[2011-08-26 16:20] You MUST read and agree to the license stored in
[2011-08-26 16:20] /usr/share/licenses/jdk/LICENSE before using it.
[2011-08-26 16:20] Please relogin to include jdk in your PATH
[2011-08-26 16:20] installed jdk (7-3)
[2011-08-26 16:20] upgraded libreoffice-extension-diagram (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-hunart (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-nlpsolver (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-numbertext (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-oooblogger (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-pdfimport (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presentation-minimizer (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presenter-screen (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-report-builder (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-typo (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-watch-window (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-wiki-publisher (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded make (3.81-5 -> 3.82-3)
[2011-08-26 16:20] upgraded libreoffice-sdk (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libsoup (2.34.1-1 -> 2.34.3-1)
[2011-08-26 16:20] upgraded libwebkit (1.4.0-1 -> 1.4.2-1)
[2011-08-26 16:20] upgraded links (2.3pre1-1 -> 2.3-1)
[2011-08-26 16:20] upgraded logrotate (3.7.9-1 -> 3.8.0-1)
[2011-08-26 16:20] upgraded luasocket (2.0.2-4 -> 2.0.2-5)
[2011-08-26 16:20] upgraded lzo2 (2.04-1 -> 2.05-1)
[2011-08-26 16:20] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-2)
[2011-08-26 16:20] upgraded mdadm (3.2.1-3 -> 3.2.2-3)
[2011-08-26 16:20] upgraded mercurial (1.8.3-1 -> 1.9.1-1)
[2011-08-26 16:21] ERROR: Module nvidia is in use
[2011-08-26 16:21] In order to use the new nvidia module, exit Xserver and unload it manually.
[2011-08-26 16:21] upgraded nvidia-173xx (173.14.30-1 -> 173.14.31-2)
[2011-08-26 16:21] upgraded octave (3.4.0-2 -> 3.4.2-2)
[2011-08-26 16:21] upgraded openal (1.13-1 -> 1.13-2)
[2011-08-26 16:21] upgraded openbox (3.4.11.2-2 -> 3.5.0-3)
[2011-08-26 16:21] upgraded xine-lib (1.1.19-2 -> 1.1.19-3)
[2011-08-26 16:21] ==> Documentation and samples are in separate packages:
[2011-08-26 16:21]
[2011-08-26 16:21] * opencv-docs
[2011-08-26 16:21] * opencv-samples
[2011-08-26 16:21] upgraded opencv (2.2.0-5 -> 2.3.0-1)
[2011-08-26 16:21] upgraded oxygen-gtk (1.0.4-1 -> 1.1.2-1)
[2011-08-26 16:22] upgraded oxygen-icons-svg (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:22] upgraded p7zip (9.20.1-1 -> 9.20.1-4)
[2011-08-26 16:22] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2011-08-26 16:22] upgraded pacman-mirrorlist (20110324-1 -> 20110816-1)
[2011-08-26 16:22] upgraded pcmciautils (017-2 -> 018-1)
[2011-08-26 16:22] upgraded perl-text-iconv (1.7-5 -> 1.7-6)
[2011-08-26 16:22] upgraded perl-xml-parser (2.40-2 -> 2.41-1)
[2011-08-26 16:22] upgraded pkg-config (0.25-3 -> 0.26-1)
[2011-08-26 16:22] upgraded postgresql-libs (9.0.4-3 -> 9.0.4-4)
[2011-08-26 16:22] upgraded procps (3.2.8-3 -> 3.2.8-4)
[2011-08-26 16:22] upgraded python2-distribute (0.6.16-1 -> 0.6.19-1)
[2011-08-26 16:22] upgraded qtcurve-gtk2 (1.8.8-1 -> 1.8.9-1)
[2011-08-26 16:22] upgraded qtcurve-kde4 (1.8.7-1 -> 1.8.8-1)
[2011-08-26 16:24] upgraded qt-doc (4.7.2-1 -> 4.7.3-1)
[2011-08-26 16:24] >>> The kernel-mode plugin has a new place.
[2011-08-26 16:24] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
[2011-08-26 16:24] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[2011-08-26 16:24] upgraded rp-pppoe (3.10-6 -> 3.10-7)
[2011-08-26 16:24] upgraded rrdtool (1.4.5-1 -> 1.4.5-4)
[2011-08-26 16:24] updating gtk.immodules... done.
[2011-08-26 16:24] upgraded scim (1.4.9-2 -> 1.4.11-1)
[2011-08-26 16:24] upgraded screen (4.0.3-11 -> 4.0.3-12)
[2011-08-26 16:24] upgraded skype (2.2.0.25-1 -> 2.2.0.35-1)
[2011-08-26 16:24] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
[2011-08-26 16:24] upgraded sudo (1.8.1.p1-1 -> 1.8.2-1)
[2011-08-26 16:24] upgraded syslog-ng (3.2.2-2 -> 3.2.4-3)
[2011-08-26 16:25] upgraded tcl (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:26] Updating font cache... done.
[2011-08-26 16:26] Note: terminus-font is in /usr/share/fonts/local/
[2011-08-26 16:26] upgraded terminus-font (4.32-1 -> 4.36-1)
[2011-08-26 16:26] upgraded tk (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:27] Updating font cache... done.
[2011-08-26 16:27] upgraded ttf-liberation (1.06.0.20100721-1 -> 1.07.0-1)
[2011-08-26 16:27] upgraded tzdata (2011g-1 -> 2011h-1)
[2011-08-26 16:27] upgraded usbutils (002-2 -> 004-1)
[2011-08-26 16:27] upgraded vi (050325-4 -> 1:050325-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-supertab (1.5-1 -> 1.6-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-vcscommand (1.99.42-1 -> 1.99.43-1)
[2011-08-26 16:27] upgraded wget (1.12-5 -> 1.13.1-1)
[2011-08-26 16:27] upgraded wine (1.3.19-2 -> 1.3.26-1)
[2011-08-26 16:27] upgraded winetricks (20110429-1 -> 20110629-1)
[2011-08-26 16:27] upgraded xcursor-themes (1.0.2-1 -> 1.0.3-1)
[2011-08-26 16:27] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-08-26 16:27] upgraded xorg-util-macros (1.13.0-1 -> 1.15.0-1)
[2011-08-26 16:27] upgraded xorg-server-devel (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:27] upgraded xorg-twm (1.0.6-2 -> 1.0.7-1)
[2011-08-26 16:27] upgraded xorg-x11perf (1.5.3-2 -> 1.5.4-1)
[2011-08-26 16:27] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
[2011-08-26 16:28] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xpdf (3.02_pl6-1 -> 3.03-1)
[2011-08-26 16:28] upgraded xscreensaver (5.12-2 -> 5.14-1)
[2011-08-26 16:28] upgraded xterm (269-1 -> 271-1)
[2011-08-26 16:28] upgraded xulrunner (2.0.1-1 -> 6.0-2)
[2011-08-26 16:28] upgraded zsnes (1.51-7 -> 1.51-9)
/etc/rc.conf without any comments:
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MODULES=()
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
interface=eth0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs @crond @cups @sshd @startntpd)
/etc/mkinitcpio.conf without any comments:
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetect pata scsi sata filesystems"
Please let me know if you need to know anything else.
Last edited by Mogger (2012-03-30 23:33:38)I've temporarily fixed the problem by doing the following:
removed cryptsetup (1.3.1-2)
removed lvm2 (2.02.88-1)
removed mdadm (3.2.2-4)
removed linux (3.0.6-2)
upgraded mkinitcpio-busybox (1.18.5-1 -> 1.18.2-1)
installed gen-init-cpio (2.6.36-1)
upgraded udev (173-3 -> 167-2)
upgraded mkinitcpio (0.7.3-1 -> 0.6.11-1)
installed kernel26 (2.6.38.5-1)
upgraded nvidia-173xx-utils (173.14.31-1 -> 173.14.30-1)
upgraded nvidia-173xx (173.14.31-2 -> 173.14.30-1)
upgraded initscripts (2011.07.3-1 -> 2011.04.1-2)
upgraded net-tools (1.60.20110819cvs-1 -> 1.60-18)
I also restored my old /etc/mkinitcpio.conf, /etc/inittab and /etc/rc.conf.
I'm still interested in a solution to the original problem. Is it a problem with my configuration, the new kernel, the udev version or something else?
The difference in inittab is just a -s option and the mkinitcpio.conf files are the same except for some comments. rc.conf has the biggest changes and is now (removed comments):
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
MOD_AUTOLOAD="yes"
MODULES=(!usblp !pcspkr)
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs !wicd @crond @cups @sshd @startntpd)
Last edited by Mogger (2011-10-11 14:04:20) -
Trying to add jquery slider to my page but it breaks my images?
Hi everybody. This is my first post but I am a long time user of Adobe products. This is my first time ever doing a jquery slider in Dreamweaver and it breaks my images whenever I add it to my site. I have tried several different sliders but Nivo was the only one that I could get installed. I get this problem of my images moving around and getting big white gaps between them. I also get another problem of not being able to add text to the page after I put in the slider code. What I am trying to do is put the slider in then have about a paragraph of text under the slider but once the slider code is put in the html I am unable to add or move text. Not sure what is going on there.
I uploaded 2 test pages, one without the slider installed and one with it installed.
http://kerrvilleair.com/before.html
http://kerrvilleair.com/after.html
<html>
<head>
<title>newheader</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<link rel="stylesheet" href="http://kerrvilleair.com/nivo-slider.css" type="text/css" media="screen" />
<link rel="stylesheet" href="http://kerrvilleair.com/themes/default/default.css" type="text/css" media="screen" />
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"></script>
<script src="jquery.nivo.slider.pack.js" type="text/javascript"></script>
</head>
<body bgcolor="#FFFFFF" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<!-- Save for Web Slices (newheader.psd) -->
<table id="Table_01" width="1294" height="1578" border="0" cellpadding="0" cellspacing="0">
<tr>
<td colspan="2" rowspan="14">
<img src="images/kerrheader_01.gif" width="156" height="705" alt=""></td>
<td colspan="13" rowspan="5">
<img src="images/kerrheader_02.gif" width="358" height="131" alt=""></td>
<td colspan="19">
<img src="images/kerrheader_03.gif" width="779" height="2" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="2" alt=""></td>
</tr>
<tr>
<td colspan="7" rowspan="2">
<img src="images/kerrheader_04.gif" width="376" height="58" alt=""></td>
<td colspan="3">
<img src="images/kerrheader_05.gif" width="57" height="54" alt=""></td>
<td rowspan="2">
<img src="images/kerrheader_06.gif" width="30" height="58" alt=""></td>
<td>
<img src="images/kerrheader_07.gif" width="56" height="54" alt=""></td>
<td colspan="2" rowspan="2">
<img src="images/kerrheader_08.gif" width="29" height="58" alt=""></td>
<td colspan="3">
<img src="images/kerrheader_09.gif" width="61" height="54" alt=""></td>
<td colspan="2" rowspan="2">
<img src="images/kerrheader_10.gif" width="170" height="58" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="54" alt=""></td>
</tr>
<tr>
<td colspan="3">
<img src="images/kerrheader_11.gif" width="57" height="4" alt=""></td>
<td>
<img src="images/kerrheader_12.gif" width="56" height="4" alt=""></td>
<td colspan="3">
<img src="images/kerrheader_13.gif" width="61" height="4" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="4" alt=""></td>
</tr>
<tr>
<td colspan="4" rowspan="7">
<img src="images/kerrheader_14.gif" width="221" height="399" alt=""></td>
<td colspan="2">
<img src="images/aboutslice.gif" width="96" height="60" alt=""></td>
<td colspan="3">
<img src="images/serviceslice.gif" width="94" height="60" alt=""></td>
<td colspan="4">
<img src="images/contactusslice.gif" width="114" height="60" alt=""></td>
<td colspan="5">
<img src="images/reviewslice.gif" width="87" height="60" alt=""></td>
<td rowspan="23">
<img src="images/kerrheader_19.gif" width="167" height="1517" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="60" alt=""></td>
</tr>
<tr>
<td colspan="14" rowspan="2">
<img src="images/kerrheader_20.gif" width="391" height="125" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="11" alt=""></td>
</tr>
<tr>
<td colspan="13" rowspan="5">
<img src="images/kerrheader_21.gif" width="358" height="328" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="114" alt=""></td>
</tr>
<tr>
<td colspan="4" rowspan="4">
<img src="images/kerrheader_22.gif" width="157" height="214" alt=""></td>
<td colspan="7">
<img src="images/kerrheader_23.gif" width="211" height="49" alt=""></td>
<td colspan="3" rowspan="4">
<img src="images/kerrheader_24.gif" width="23" height="214" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="49" alt=""></td>
</tr>
<tr>
<td colspan="7">
<img src="images/kerrheader_25.gif" width="211" height="16" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="16" alt=""></td>
</tr>
<tr>
<td colspan="7">
<img src="images/kerrheader_26.gif" width="211" height="52" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="52" alt=""></td>
</tr>
<tr>
<td colspan="7">
<img src="images/kerrheader_27.gif" width="211" height="97" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="97" alt=""></td>
</tr>
<tr>
<td colspan="9">
<img src="images/kerrheader_28.gif" width="307" height="63" alt=""></td>
<td colspan="21" rowspan="3">
<img src="images/textslice.gif" width="660" height="232" alt=""></td>
<td rowspan="16">
<img src="images/kerrheader_30.gif" width="3" height="1118" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="63" alt=""></td>
</tr>
<tr>
<td colspan="2" rowspan="3">
<img src="images/kerrheader_31.gif" width="21" height="183" alt=""></td>
<td colspan="5">
<img src="images/kerrheader_32.gif" width="271" height="148" alt=""></td>
<td colspan="2" rowspan="10">
<img src="images/kerrheader_33.gif" width="15" height="606" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="148" alt=""></td>
</tr>
<tr>
<td colspan="5" rowspan="2">
<img src="images/kerrheader_34.gif" width="271" height="35" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="21" alt=""></td>
</tr>
<tr>
<td rowspan="13">
<img src="images/kerrheader_35.gif" width="1" height="886" alt=""></td>
<td rowspan="8">
<img src="images/kerrheader_36.jpg" width="24" height="437" alt=""></td>
<td colspan="18" rowspan="6"><div class="slider-wrapper theme-default"">
<div id="slider" class="nivoSlider">
<img src="demo/images/nemo.jpg" alt="" />
<a href="http://dev7studios.com"><img src="demo/images/walle.jpg" alt="" title="#htmlcaption" /></a>
<img src="demo/images/up.jpg" alt="" title="This is an example of a caption" />
<img src="demo/images/toystory.jpg" alt="" />
</div>
</div>
<div id="htmlcaption" class="nivo-html-caption">
<strong>This</strong> is an example of a <em>HTML</em> caption with <a href="#">a link</a>.
</div>
<script type="text/javascript">
$(window).load(function() {
$('#slider').nivoSlider();
</script>
</td>
<td rowspan="13">
<img src="images/kerrheader_38.gif" width="12" height="886" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="14" alt=""></td>
</tr>
<tr>
<td rowspan="12">
<img src="images/kerrheader_39.gif" width="100" height="872" alt=""></td>
<td colspan="6">
<img src="images/reviewslice-41.gif" width="193" height="110" alt=""></td>
<td colspan="2" rowspan="2">
<img src="images/kerrheader_41.gif" width="155" height="118" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="110" alt=""></td>
</tr>
<tr>
<td colspan="6">
<img src="images/kerrheader_42.gif" width="193" height="8" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="8" alt=""></td>
</tr>
<tr>
<td colspan="4" rowspan="5">
<img src="images/kerrheader_43.gif" width="81" height="305" alt=""></td>
<td colspan="3">
<img src="images/customerslice.gif" width="261" height="71" alt=""></td>
<td rowspan="5">
<img src="images/kerrheader_45.gif" width="6" height="305" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="71" alt=""></td>
</tr>
<tr>
<td colspan="3">
<img src="images/kerrheader_46.gif" width="261" height="33" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="33" alt=""></td>
</tr>
<tr>
<td rowspan="3">
<img src="images/kerrheader_47.gif" width="1" height="201" alt=""></td>
<td colspan="2" rowspan="2">
<img src="images/contactslice.gif" width="260" height="91" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="46" alt=""></td>
</tr>
<tr>
<td colspan="18" rowspan="4">
<img src="images/kerrheader_49.gif" width="623" height="528" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="45" alt=""></td>
</tr>
<tr>
<td colspan="2">
<img src="images/kerrheader_50.gif" width="260" height="110" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="110" alt=""></td>
</tr>
<tr>
<td colspan="2" rowspan="5">
<img src="images/kerrheader_51.gif" width="66" height="449" alt=""></td>
<td colspan="7">
<img src="images/satisfiedslice.jpg" width="294" height="308" alt=""></td>
<td rowspan="5">
<img src="images/kerrheader_53.gif" width="3" height="449" alt=""></td>
<td rowspan="5">
<img src="images/kerrheader_54.gif" width="24" height="449" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="308" alt=""></td>
</tr>
<tr>
<td colspan="7" rowspan="4">
<img src="images/kerrheader_55.gif" width="294" height="141" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="65" alt=""></td>
</tr>
<tr>
<td colspan="3">
<img src="images/kerrheader_56.gif" width="69" height="2" alt=""></td>
<td rowspan="2">
<img src="images/kerrheader_57.jpg" width="72" height="47" alt=""></td>
<td rowspan="2">
<img src="images/kerrheader_58.jpg" width="88" height="47" alt=""></td>
<td colspan="2" rowspan="2">
<img src="images/kerrheader_59.jpg" width="75" height="47" alt=""></td>
<td colspan="11" rowspan="3">
<img src="images/kerrheader_60.gif" width="319" height="76" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="2" alt=""></td>
</tr>
<tr>
<td rowspan="2">
<img src="images/kerrheader_61.gif" width="6" height="74" alt=""></td>
<td colspan="2">
<img src="images/kerrheader_62.jpg" width="63" height="45" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="45" alt=""></td>
</tr>
<tr>
<td colspan="6">
<img src="images/kerrheader_63.gif" width="298" height="29" alt=""></td>
<td>
<img src="images/spacer.gif" width="1" height="29" alt=""></td>
</tr>
<tr>
<td>
<img src="images/spacer.gif" width="100" height="1" alt=""></td>
<td>
<img src="images/spacer.gif" width="56" height="1" alt=""></td>
<td>
<img src="images/spacer.gif" width="10" height="1"Graphics apps are for images only. The HTML output is not stable enough for real web sites.
This 3-part tutorial describes how to bring your Design Comp from Fireworks or Photoshop into a CSS Layout in Dreamweaver.
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
Nancy O. -
Video chat breaks down after a few seconds
Hi. I need help.
iChat video chat breaks down after a few seconds. Audio is ok if I begin with it, but doesn't work after a failed video chat. The message that pops up afterwards tells me (in Swedish) that "No data was received during the last 10 seconds. Info about audio channel: local machine uses [IP]:16402 and expects remote machine to send to 83.xxx.xxx.xx:43787." Repeats the same for video channel. What am I to do with the network settings to make this work. I have now realized that this is not a software problem (since upgrading to 10.6/iChat 5.0 didn't solve anything) so it must be the router or my new Time Capsule's settings. But where do I start?
Thank you in advance,
RikardHi and thanks for your help,
I have now had a chance to try the chat again, works fine at first but after say 3-5 minutes the connection breaks in the same fashion as before, unfortunately.
One thing I noticed when flicking on Back to my Mac (just to try it for fun in Snow Leopard - it's never worked for me!) it first turned green, after which it said the familiar: that my router must be capable of UPnP or NAT-PNP. Funny, that was what I thought I had... Could this be connected to the iChat problem do you think?
About the NAT tab: it is really gone when Bridge mode is on, but it reappears when I change from Bridge mode, and when I did it really was on (by default?). I turned it off and changed back to Bridge mode. I have switched off ping as you said. No port scan or DOS/SPI switch anywhere.
I found a iChatConnectionError Log in my Library folder, here it is. Can you read anything from it? Sorry if I quote too much of it.
Thank you ever so much for your help and patience!!!
Cheers,
Rikard
Date/Time: 2009-09-10 22:36:01 +0200
OS Version: 10.6 (Build 10A432)
Report Version: 4
iChat Connection Log:
2009-09-10 22:31:07 +0200: AVChat started with ID 1023772168.
2009-09-10 22:31:07 +0200: [email protected]: State change from AVChatNoState to AVChatStateWaiting.
2009-09-10 22:31:08 +0200: 0x1503c640: State change from AVChatNoState to AVChatStateInvited.
2009-09-10 22:31:20 +0200: 0x1503c640: State change from AVChatStateInvited to AVChatStateConnecting.
2009-09-10 22:31:20 +0200: [email protected]: State change from AVChatStateWaiting to AVChatStateConnecting.
2009-09-10 22:31:22 +0200: 0x1503c640: State change from AVChatStateConnecting to AVChatStateConnected.
2009-09-10 22:31:22 +0200: [email protected]: State change from AVChatStateConnecting to AVChatStateConnected.
2009-09-10 22:35:54 +0200: 0x1503c640: State change from AVChatStateConnected to AVChatStateEnded.
2009-09-10 22:35:54 +0200: 0x1503c640: Error -20 (No data has been received for the last 10 seconds.)
2009-09-10 22:35:54 +0200: [email protected]: State change from AVChatStateConnected to AVChatStateEnded.
2009-09-10 22:35:54 +0200: [email protected]: Error -20 (No data has been received for the last 10 seconds.)
Video Conference Error Report:
Video Conference Support Report:
0.906771 @/SourceCache/VideoConference/VideoConference-413.1/Video Conference/VCInitiateConference.m:2059 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
12.938180 @/SourceCache/VideoConference/VideoConference-413.1/Video Conference/VCInitiateConference.m:2074 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
12.942269 @/SourceCache/VideoConference/VideoConference-413.1/Video Conference/VCInitiateConference.m:2266 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
13.510177 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK1915c359518ecdff
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:53021>;isfocus
User-Agent: Viceroy 1.4
Content-Type: application/sdp
Content-Length: 691
v=0
o=rwe 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1028:2:2000
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 53021 RTP/AVP 110 12 124 3 0
a=rtcp:53021
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:124 iLBC/8000
a=fmtp:124 mode=30
a=rtpID:1302073922
m=video 53021 RTP/AVP 123 126 34
a=rtcp:53021
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 53021 VIDEO 53021
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3942380804
13.573313 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK1915c359518ecdff
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 1 INVITE
User-Agent: Viceroy 1.3
Content-Length: 0
13.578097 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK1915c359518ecdff
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>
User-Agent: Viceroy 1.3
Content-Length: 0
13.630282 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK1915c359518ecdff
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 447
[v=0
o=Tereza 0 0 IN IP4 85.207.212.108
s=0
c=IN IP4 85.207.212.108
b=AS:2147483647
t=0 0
a=hwi:1056:2:2400
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16402 RTP/AVP 110
a=rtcp:16402
a=rtpmap:110 X-AAC_LD/22050
a=rtpID:2791552913
m=video 16402 RTP/AVP 126
a=rtcp:16402
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=framerate:20
a=rtpID:4227632299
13.630475 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[ACK sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK3ae3ec514e279731
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.4
Content-Length: 0
13.894681 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Received the first BWD packet from 85.207.212.108:16402]
14.207406 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Avg=101670.10, NSDev=5.99%]
14.379979 @:0 type=1 (00000000/1)
[Bandwidth Detection]
[Avg=819476.14, NSDev=14.91%]
14.668924 @:0 type=1 (00000000/2)
[Bandwidth Detection]
[Avg=876693.75, NSDev=2.76%]
30.010139 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK24bb76a57e39f56c
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
30.074259 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK24bb76a57e39f56c
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
33.761317 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK2b04f9e87be3f970
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 1 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
33.761904 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK2b04f9e87be3f970
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 1 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
60.010006 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK3a7cbbd3388be502
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
60.094368 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK3a7cbbd3388be502
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
63.243653 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK0976b592136e3f86
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
63.244012 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK0976b592136e3f86
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
90.010203 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK471ce4ef26fec5db
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
90.094581 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK471ce4ef26fec5db
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
93.247021 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK4676dbd16ea0e798
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
93.247360 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK4676dbd16ea0e798
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
120.010795 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK65ed53f739b14304
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 5 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
120.072294 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK65ed53f739b14304
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 5 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
123.242498 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK4d82dd02688b1c1e
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
123.242837 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK4d82dd02688b1c1e
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
150.010414 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK0ff99de82a78e39a
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 6 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
150.079030 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK0ff99de82a78e39a
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 6 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
153.243228 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK3469e2c21c98ff3f
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 5 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
153.243697 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK3469e2c21c98ff3f
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 5 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
180.010864 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK412dfa7e0c06edd2
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 7 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
180.101288 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK412dfa7e0c06edd2
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 7 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
183.244489 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK03cff3273c711092
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 6 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
183.244842 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK03cff3273c711092
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 6 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
210.010121 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK363cc4ff0e6aa6a5
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 8 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
210.089011 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK363cc4ff0e6aa6a5
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 8 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
213.245488 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK4f84ed5135927fed
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 7 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
213.245786 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK4f84ed5135927fed
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 7 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
240.011278 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK2d21636059476d9c
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 9 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
240.081069 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK2d21636059476d9c
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 9 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
243.241715 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK0ef598581fe4dab4
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 8 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
243.242083 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK0ef598581fe4dab4
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 8 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
270.010467 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK68d5a5966c352463
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 10 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
270.510580 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK68d5a5966c352463
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 10 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
271.510747 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK68d5a5966c352463
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 10 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
273.249136 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK07c3dac3108b271d
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 9 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
273.249482 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK07c3dac3108b271d
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 9 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
273.510938 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK68d5a5966c352463
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 10 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
274.746827 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:338 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK07c3dac3108b271d
Max-Forwards: 70
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 9 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
274.746935 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 85.207.212.108:16402;branch=z9hG4bK07c3dac3108b271d
To: "0" <sip:user@lip:16402>;tag=1403354203
From: "u0" <sip:user@rip:16402>;tag=1462805055
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 9 MESSAGE
User-Agent: Viceroy 1.4
Content-Length: 0
277.511092 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK68d5a5966c352463
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 10 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
281.511281 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK68d5a5966c352463
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 10 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
285.511416 @/SourceCache/VideoConference/VideoConference-413.1/SIP/Transport.c:2138 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:53021;branch=z9hG4bK68d5a5966c352463
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1462805055
From: "0" <sip:user@lip:16402>;tag=1403354203
Call-ID: e6a5ca6e-9e48-11de-8d1c-a397d0cd4012@lip
CSeq: 10 MESSAGE
User-Agent: Viceroy 1.4
Content-Type: text/plain
Content-Length: 4
PING]
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
12.942273 @/SourceCache/VideoConference/VideoConference-413.1/Video Conference/VideoConferenceGlobalObjects.m:1670 type=5 (00000000/0)
[Router]
[FULLCONE]
12.942281 @/SourceCache/VideoConference/VideoConference-413.1/Video Conference/VideoConferenceGlobalObjects.m:1672 type=5 (00000000/0)
[CommNAT Result: 0x00000112
14.727639 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 689 up, 689 down. (00000000)
14.784170 @/SourceCache/VideoConference/VideoConference-413.1/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
[] -
The biggest breaker of Arch Linux, ever...
Damn, I've never seen so many posts about anything breaking Arch the way the new Xorg 7.0 stuff has, especially in such a short time. :shock:
How about the rest of you? Do you remember anything ever causing more havoc among upgraders and fresh installers?Well, I think the majority of ALL problems can be summed up by one of three things:
1) Mirror sync issues. I don't know how many people I've talked to already that only got HALF the update when they did a pacman -Syu, and that borked stuff royal, because the mirror wasn't totally synched yet.
2) Improper dependency lists on KDE stuff (and possibly other stuff too). This got fixed rather quickly, but alot of people were missing necessary libs to run KDE properly. The same happened with Gaim too, now that I think about it, and is probably present elsewhere.
3) The upgrade from Xorg 7 xorg-clients as a single package to split packages, causing a bunch of files to disappear. This one only affected the people who were already using Xorg 7 from testing. This one was caused by the behaviour of pacman when files move from one package to another -- it's a tough one to catch, I'd imagine.
So, in summary, these problems were problems on the pacman/server side - for that reason it's not surprising that they hit everyone. Problems with udev or initrd were more on the individual system-by-system basis - prepared people could be ready and do what they needed to do; there was nothing inherently wrong with the packages or the mirrors. Plus the Xorg upgrade is massive compared to the initrd/udev stuff.
Long and short of it; I'm not surprised there were more issues to deal with, when just considering the circumstances. -
Dinit - an alternative base/udev hook for mkinitcpio
Note: dinit has been removed from the AUR is now part of geninit. It still exists on github as a separate project if you want to play with it.
This is something fun that I've been fooling around with for the past week, and I'm pretty happy with it, so I figured I'd give it a little publicity. I've rewritten mkinitcpio's PID 1 in C, and it works as almost a drop-in replacement.
Why? Most of init can be taken care of with native C and some parts are more easily and thoroughly covered than with shell script. I'm currently booting off an image weighing in at under 1mb (it does not have busybox). You can do this too assuming, of course, that you aren't using any runtime hooks.
You can tell if you're using any runtime hooks by checking your current boot image:
$ bsdtar tf /boot/kernel26.img | grep '^/hooks'
If that returns anything more than /hooks/udev, you're using runtime hooks to prepare your root device for mounting. This mainly applies to people using encrypted root, lvm2, sometimes mdadm, and there's some other fancy business like plymouth or keymap. This doesn't disqualify you, it just means you need to read this to the end.
I've created two new base layouts to go with it:
ubase: Very similar to the current base layout, and includes udev. If you're using any runtime hooks, see below for how to modify them for use with dinit.
uubase: Masochistic. No udev. No busybox. No runtime hooks allowed. You must supply all modules in the MODULES= define in /etc/mkinitcpio.conf, and your root cannot be specified as a /dev/disk/by-{uuid,label} symlink. Use /dev/sdxy, or specify the device major/minor (e.g. 8:2 or 802). I currently boot off of this with great success -- my root setup isn't complicated.
I mentioned that this isn't quite a drop-in replacement. What needs to be modified? Since hooks are being run as a fork/exec, you'll need to remove the function wrapper on each runtime hook, and dress them up a bit. Simply done:
Remove the 'run_hook() {' function header and the closing '}'.
Make sure line 1 is a shebang: #!/bin/busybox ash
Mark the hook executable: chmod +x /lib/initcpio/hook/$hookname.
You're no longer inherting from init_functions, so calls such as 'msg' need to go away. This isn't mandatory, but you may see a few 'command not found' errors if you skip this step. They're harmless.
Don't regenerate the image just yet.
Now, modify /etc/mkinitcpio.conf. Remove base and udev from HOOKS, and add in your drug of choice: ubase or uubase.
This next step is important, because I don't wish anybody any particular harm. As much as I've tested this, I really don't want anyone to be in a situation where they need to chroot from a liveCD to get back to a booting system. So, make an image with a different name than whatever it is you're currently booting with, e.g.
# mkinitcpio -g /boot/dinit.img
Add a new boot entry to your bootloader of choice or just edit at boot time.
Other notes:
This should still support 99% of what mkinitcpio supports in terms of command line parameters such as: skiphooks, earlymodules, disablemodules, rootdelay, break (ubase only, of course), and init.
Intentionally discluded: /lib/udev/load-modules.sh is a symlink to /sbin/modprobe. I'll only say that blacklisting for disablemodules is done the way upstream recommends it done. You won't notice the difference.
No support for a '/message' file. I didn't think it was a big deal.
The most important part: where to find it?
On Github: https://github.com/falconindy/dinit
In the AUR: https://aur.archlinux.org/packages.php?ID=48454
I'd love to know what setups people are able to use with this, and I'm almost more interested in what setups don't work, so I can fix them. If you'd like to tell me my code sucks, please provide as much information as possible. Posting the contents of a working initcpio (bsdtar -tf /boot/kernel-26.img) and /etc/mkinitcpio.conf would be most helpful (remember to use code tags!). If you're using a non-stock kernel I'd like to know that too.
Last edited by falconindy (2011-04-30 16:26:21)Works here with
/hooks
/hooks/udev/
/hooks/resume
using kernel26-pf-core2
/lib
/lib/modules
/lib/modules/2.6.38-pf
/lib/modules/2.6.38-pf/kernel
/lib/modules/2.6.38-pf/kernel/drivers
/lib/modules/2.6.38-pf/kernel/drivers/char
/lib/modules/2.6.38-pf/kernel/drivers/char/agp
/lib/modules/2.6.38-pf/kernel/drivers/char/agp/intel-gtt.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/char/agp/intel-agp.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/i2c
/lib/modules/2.6.38-pf/kernel/drivers/i2c/i2c-core.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/gpu
/lib/modules/2.6.38-pf/kernel/drivers/gpu/drm
/lib/modules/2.6.38-pf/kernel/drivers/gpu/drm/drm.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/gpu/drm/drm_kms_helper.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/acpi
/lib/modules/2.6.38-pf/kernel/drivers/acpi/video.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/acpi/button.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/i2c/algos
/lib/modules/2.6.38-pf/kernel/drivers/i2c/algos/i2c-algo-bit.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/gpu/drm/i915
/lib/modules/2.6.38-pf/kernel/drivers/gpu/drm/i915/i915.ko.gz
/proc
/sys
/dev
/bin
/sbin
/usr
/usr/bin
/usr/lib
/usr/sbin
/run
/new_root
/etc
/etc/udev
/etc/udev/udev.conf
/etc/modprobe.d
/etc/modprobe.d/usb-load-ehci-first.conf
/lib/udev
/lib/udev/rules.d
/lib/udev/rules.d/50-firmware.rules
/lib/udev/rules.d/50-udev-default.rules
/lib/udev/rules.d/60-persistent-storage.rules
/lib/udev/rules.d/80-drivers.rules
/lib/udev/firmware
/lib/udev/ata_id
/lib/udev/path_id
/lib/udev/scsi_id
/lib/udev/usb_id
/init
/lib/libblkid.so.1
/lib/libblkid.so.1.1.0
/lib/libc.so.6
/lib/libc-2.13.so
/lib/libuuid.so.1
/lib/libuuid.so.1.3.0
/lib/ld-linux-x86-64.so.2
/lib/ld-2.13.so
/bin/busybox
/sbin/modprobe
/sbin/blkid
/sbin/udevd
/lib/librt.so.1
/lib/librt-2.13.so
/lib/libpthread.so.0
/lib/libpthread-2.13.so
/sbin/udevadm
/lib/udev/load-modules.sh
/config
/lib/modules/2.6.38-pf/kernel/drivers/scsi
/lib/modules/2.6.38-pf/kernel/drivers/scsi/scsi_mod.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/ata
/lib/modules/2.6.38-pf/kernel/drivers/ata/libata.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/ata/libahci.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/ata/ahci.ko.gz
/lib/modules/2.6.38-pf/kernel/drivers/scsi/sd_mod.ko.gz
/hooks
/hooks/resume
/lib/modules/2.6.38-pf/kernel/fs
/lib/modules/2.6.38-pf/kernel/fs/mbcache.ko.gz
/lib/modules/2.6.38-pf/kernel/fs/jbd2
/lib/modules/2.6.38-pf/kernel/fs/jbd2/jbd2.ko.gz
/lib/modules/2.6.38-pf/kernel/lib
/lib/modules/2.6.38-pf/kernel/lib/crc16.ko.gz
/lib/modules/2.6.38-pf/kernel/fs/ext4
/lib/modules/2.6.38-pf/kernel/fs/ext4/ext4.ko.gz
/lib/modules/2.6.38-pf/modules.dep
/lib/modules/2.6.38-pf/modules.alias
/lib/modules/2.6.38-pf/modules.symbols
Last edited by el mariachi (2011-04-24 14:14:23) -
[SOLVED] udev rule launch graphical app
How can I make a udev rule launch a graphical application, like, for instance, feh?
I've tried creating a rule detects when a specific mass storage device is connected and executes a script (/root/.scripts/feh-camera.sh). The script exports DISPLAY and XAUTHORITY and everything seems to work.
However when I restarted a black screen appeared right after Loading Modules (that appears after Starting udev events). Removing the udev rule solved the problem, so I must be doing something wrong.
What's the right way of doing this?
Thanks in advance.
Last edited by Vieira (2010-05-06 22:38:49)Device was not connected at boot but I'll try what you suggested anyway. Thanks for your help.
EDIT:
It's solved. It turns out the underlying problem was that exporting DISPLAY breaks the udev environment. For future reference solved it with:
45-foobar.rules
ATTRS{product}=="DSLR-A330", ATTR{removable}=="1", ENV{REMOVE_CMD}="/bin/umount /media/camera", RUN+="/bin/mount <bla bla>", RUN+="/bin/su vieira -c '/etc/udev/rules.d/45-foobar.sh'"
and the script, where the problem was, must not export anything, just set inline, i.e.
#!/bin/sh
HOME=/home/vieira DISPLAY=:0 /usr/bin/feh -r /mnt/camera
Last edited by Vieira (2010-05-06 22:35:39) -
Wake-on-LAN Breaks After Several Reboots, 3.18 Kernel
Greetings all,
I'm leaving town for a month and I dont' want keep my machine turned on so I set up Wake-on-LAN on my desktop machine running 3.18 kernel. Got the wol command working but the problem is that something breaks and won't work beyond a few reboots. If I phisycally power up and shutdown the machine and then try it again, it magically works again.
I set up port forwarding on my router then followed the wiki and tried every single method mentioned there, udev, cron, systemd and wol-systemd as a last resort. Strangely enough they all give me the same result, for whatever configuration, it doesn't last beyond a few reboots.
As it stands, this is my current configuration after installing the wol-systemd package from AUR:
[Unit]
Description=Wake-on-LAN for %i
Requires=network.target
After=network.target
[Service]
ExecStart=/usr/sbin/enable-wol %i
Type=oneshot
[Install]
WantedBy=multi-user.target
My alternative is to leave my machine running, I can ssh into it just fine. but I'm hoping someone can shed some light. Feel free to ask any questions. Thanks!
***EDIT***
No takers yet? Super quiet around the forums lately,
I'm no networking guru, but I read up on some additional material regarding this subject. Apparently my problem is related to my router's ARP cache releasing the IP address after an initial period. Since the cache expires the magic packets never reach the destination IP, which coincides with the problem I'm having.
An option is to use the broadcast address in place of the IP, however, that's beyond my router's capabilities, at least I think. My router is a Linksys EA6500. I've tried just about everything. I also tried messing around with AMT but that's even a bigger headache on linux. If anyone has a workaround it would surely be a great help. Thanks!
Last edited by w201 (2015-02-24 22:32:39)Greetings all,
I'm leaving town for a month and I dont' want keep my machine turned on so I set up Wake-on-LAN on my desktop machine running 3.18 kernel. Got the wol command working but the problem is that something breaks and won't work beyond a few reboots. If I phisycally power up and shutdown the machine and then try it again, it magically works again.
I set up port forwarding on my router then followed the wiki and tried every single method mentioned there, udev, cron, systemd and wol-systemd as a last resort. Strangely enough they all give me the same result, for whatever configuration, it doesn't last beyond a few reboots.
As it stands, this is my current configuration after installing the wol-systemd package from AUR:
[Unit]
Description=Wake-on-LAN for %i
Requires=network.target
After=network.target
[Service]
ExecStart=/usr/sbin/enable-wol %i
Type=oneshot
[Install]
WantedBy=multi-user.target
My alternative is to leave my machine running, I can ssh into it just fine. but I'm hoping someone can shed some light. Feel free to ask any questions. Thanks!
***EDIT***
No takers yet? Super quiet around the forums lately,
I'm no networking guru, but I read up on some additional material regarding this subject. Apparently my problem is related to my router's ARP cache releasing the IP address after an initial period. Since the cache expires the magic packets never reach the destination IP, which coincides with the problem I'm having.
An option is to use the broadcast address in place of the IP, however, that's beyond my router's capabilities, at least I think. My router is a Linksys EA6500. I've tried just about everything. I also tried messing around with AMT but that's even a bigger headache on linux. If anyone has a workaround it would surely be a great help. Thanks!
Last edited by w201 (2015-02-24 22:32:39)
Maybe you are looking for
-
I want to format the value of date which is in a variable(date_var) in MM-DD-YYYY format and print it in a document. <td> #DateFormat(#date_var#, 'MMMM DD,YYYY')# does not work </td>
-
Frequent event in PDF generation for inDesign 5.5 with Mavericks (new MacPro)
Crash report: Process: Adobe InDesign CS5.5 [30418] Path: /Applications/Adobe InDesign CS5.5/Adobe InDesign CS5.5.app/Contents/MacOS/Adobe InDesign CS5.5 Identifier: com.adobe.InDesign Version: 7.5.3.333 (7530) Code Type: X86 (Native) Parent
-
Video podcasts are cropped (solution)
You'll notice that the Ipod nano crops the sides of video podcasts by default. There is a setting to fix this but in order to access it you have to first have a video on your iPod that is not a video podcast. (Apple needs to fix this!!!) To enable th
-
Drawing in Flash - V - Importing from Illustrator
Is there any advantages or disadvantages from creating vector artwork in Illustrator and then bringing it into Flash? or is it just better to do all drawings in flash? I find it much easier to draw in Illustrator and then import the work into the fla
-
Help with .txt files importing / showing
I am working cs4. / as 3.0 I need some help understanding placing text with .txt files. I have a txt & css file in my site folder. Do I need to add a line to my script to locate the files in my site folder? Any help would be appreciated. thanks Here