Udev error, warning for users...

I added this rule:
https://wiki.archlinux.org/index.php/Ud … 3B_ntfs-3g
to my config. After I did this, I rebooted and when it got to the udev section, my PC just turned off. I had to reboot, go to fallback mode and wait until it finished searching udev devices and then went to telling me that sda1 and sda4 cannot be mounted. Then the CTL-D or enter password thing came up. I entered my password. After I removed the rule I was able to boot successfully. Installed devmon and everything is fine without the rule.
Just wanted to see if anyone else had this issue and if I should maybe add this to the wiki as a warning.
/boot/grub/menu1st
# (0) # (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/8f3f4f18-bb70-4de0-8c84-5ffb780d1144 ro 5
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/8f3f4f18-bb70-4de0-8c84-5ffb780d1144 ro 3
initrd /initramfs-linux-fallback.img
Last edited by Anonymo (2011-08-20 08:36:58)

It's not really surprising, given that the rule is vague enough to catch and try to mount any block device. You can modify the rule to...
- not catch sda (e.g. KERNEL!=sd[b-z])
or...
- abort if the device doesn't match ENV{ID_BUS}=="usb"

Similar Messages

Error output for users

Hi.
The code that is being run is :
message 'check loads' type 'E'.
I want it to not send out the message "check loads", but to display the information in the particular table fields and also log it. What would be the syntax to post the data for a particular field in a table? Would you use the EXTRACT command and then the particular field names?
Also, I know that error message type 'E' logs the error, but it also stops the other jobs that are scheduled.
Would message type 'S' be suitable to log the error AND keep the other jobs that are scheduled to still run even though a previous job had an error?

Ok, maybe this might help clarify what I want:
This is the Code
message 'check loads' type 'E'.
else.
Read table [table name] with key [file name] = '101'
[file name] = '250'.
if sy-subrc = '0'.
    open dataset dsn for output in text mode encoding default.
    transfer flag_n to dsn.
    close dataset dsn.
    CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
    EXPORTING
      COMMANDNAME                         = CMDNAME
    ADDITIONAL_PARAMETERS               =
     OPERATINGSYSTEM                     = SY-OPSYS
     TARGETSYSTEM                        = tgtsys
    DESTINATION                         =
     STDOUT                              = 'X'
     STDERR                              = 'X'
     TERMINATIONWAIT                     = 'X'
    TRACE                               =
IMPORTING
    STATUS                              =
    EXITCODE                            =
   TABLES
     EXEC_PROTOCOL                       = rec
EXCEPTIONS
    NO_PERMISSION                       = 1
    COMMAND_NOT_FOUND                   = 2
    PARAMETERS_TOO_LONG                 = 3
    SECURITY_RISK                       = 4
    WRONG_CHECK_CALL_INTERFACE          = 5
    PROGRAM_START_ERROR                 = 6
    PROGRAM_TERMINATION_ERROR           = 7
    X_ERROR                             = 8
    PARAMETER_EXPECTED                  = 9
    TOO_MANY_PARAMETERS                 = 10
    ILLEGAL_COMMAND                     = 11
    WRONG_ASYNCHRONOUS_PARAMETERS       = 12
    CANT_ENQ_TBTCO_ENTRY                = 13
    JOBCOUNT_GENERATION_ERROR           = 14
    OTHERS                              = 15
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The job log has these fields:
Date        Time         Message text          Message class          Message no.          Message type
I want the job log to display in the 'Message text' field the particular table info.
The info that I want displayed are in a particular table with these fields:
Job Name           Tivoli message             Tivoli status             Table data status
Is there a possible way to log all of this info in the job log for users to see why the job didnt finish, and also to keep the other scheduled jobs from canceling?
Thanks

SBL-DAT-00398 error msg for User Field Validation

Hi All,
I have created the following field validation on the User field "Division": Len([<Division>])>0 AND InStr([<ltValidation_OU_ITAG>],[<Division>])>0, As the "Division" field is free text, the porpuse of the validation is to prevent the user from entering in this field any value that is diffrent from the ones available in the custom field "Validation OU" via the User Owner Page Layout. The validation works OK for Admin Role via the User Admin Page Layout but a SBL-DAT-00398 error msg stating " Field '<Division>' does not exist in definition for business component 'Occam Current Employee' " appears when users with other roles are trying to update this field via the User Owner Page Layout.
I have contacted OD Customer support and they validated this in several POD saying this "is most likely a defect in the application" and a CR will be submitted to dev team to fix it sometime in the future.
I am wondering though if support isn't making life easy here stating the above...:
1. Anyone encountered this error before? (couldn't find any trace for this on My Oracle Support)
2. Anyone aware of field validation limitations for the 'User' entity?
3. Workaround suggestions are welcomed
10X for you help!
Alex.

Error(), fatal(), info() and warn() issue FacesMessages that get picked up by the MessageGroup component.
By adding in the uicomponent you can target the facesMessage so that it gets picked up by the Message component associated with the field causing the error.
But, to get the label to show the error as well, you need to throw a validationError. See this tutorial for more informaiton:
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/customvalidator.html
Lark

Error in Releasing Contracts in SRM-Error Log for user WF-BATCH

Hi,
When we are releasing contracts in SRM, an error log is being generated for a user WF-BATCH with message :
"Recipient not found
The error ocurred by processing event RELEASED_NEWLY with GUID 4530EA86C23B007700000000B0000023 and object_id= 4400000238"(Where 4400000238 is our contract no)
Also our contract is not being transported to CCM even though all the relevant configurations have been done in XI.
Is this because of the error log?? What is the issue??
Any Useful answers would be suitably rewarded..
Regards,
Puneet

Hello Puneet,
Please check whether u have released that contract or not.
if u need to release purchase order from the contract, it needs to be released first.
from ur problme statement, it seems u haven't released that contract.
Sarabjeet

Customized Error Message for User

What's your recommendation re displaying Customized User Error msg as opposed to the generic, techy #SQLERRM# ?
How can one implement this ?
How can one capture #SQLERRM# (or whatever), evaluate the ORA number and display a message grandmom can understand ?
Please give an example if you can in the context of DELETE a record on P301 "Product Information" of the "Sample App"
Thanks

short of coding the dml procs yourself and trapping those error messages that way, i don't think we offer you a good way currently to trap and translate error messages coming out of our automatic DML processes. i've just logged the enhancement request to facilitate this, but for now i'm pretty sure you'd have to code that dml and trap your errs yourself.
regards,
raj

Error message for user (PO Release Stratregy)

Dear friends,
I have created PO release strategy. I want to show an error message like "You couldn't create PO. You dont have release strategy) ", If user doesn't have any strategy for current PO data. For this message Which user exit or Bapi can help me?
Thanks

How to control if current PO doesn't have any Release Strategies I want to show an error message. Which user exit or badi???
Thanks

Error message for Users

Hello all,
My plan is to perform four hardware checks prior to the installation of some softare - the checks are:
OS is at least Windows 7
HDD Freespace is not less than 6.0 GB
CPU is greater 4.00Ghz
RAM is not less than 2.0 GB
Scripting the above is pretty easy...but what I now want to do is capture any of the failed checks and report them to the user.
E.g. one computer might fail HDD and RAM checks but another system may only fail on RAM - how can I dynamically build up a message to inform the user of the specific issue with their machine?
It would be pretty easy to just pop-up some info to the user stating that their machine doesnt meet the minimum specs but I'd rather tell them more specifically what the issue is so the service desk don't have to connect and figure out which check
or checks have failed....hope this makes sense?
Thanks,
C
Carl Barrett | Twitter: @Mosquat

multiple ways of handling this. one would be to define variables you set to true or false for the different conditions. after the checks, you build your error string depending on which variables are true or false and show it to the user.
pseudo code like:
$errorMessage = "Your system doen't meet the following minimum requirements: "
if($yourRamCheck -eq $true)
$errorMessage = $errorMessage + "System RAM below requirements"

Trapping and creating a nice error message for users

i wanted to find out how I to create a coldfusion code similar to my asp code. i'm trying to learn coldfusion.
This code traps the error and emails it to me, while showing the user a "friendly message"

on error resume next
if Err.number <> 0 then
TrapError Err.description
ON ERROR goto 0
End If
processerrors
the error page sends me the message and contains a nice error message
thanks

There's an awful ot of good info there if one was to look for it by googling "coldfusion error handling".
However the short version is:
Site-wide error handler
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ffc .html#WSc3ff6d0ea77859461172e0811cbf3638e6-7ffb
onerror:
http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-7d 4a.html
cferror:
http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-7d 29.html
Handling Errors:
http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24 -7fc4.html
Specifcally try/catch:
http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-7e c6.html
Adam

Getting error message for "user created how tos" CS3

I tried to create some new How Tos in CS3 and recieved the following error message when I try to open it:
"The Adobe Help application could not load a URL because the specified file could not be found. You may need to re-install the application and the help component."
If I access one of the ones created with CS2 it opens (I dragged them over from CS2, I have since removed CS2 from this computer, it's still on my laptop) I haven't tried creating them and importing them to this computer).
I'm using Microsoft Office Word 2003 to save the How Tos as html files, and notepad to edit Add_001.howto file.
Since I gotten this error, I reloaded CS3 Design Standard, it didn't fix the problem. Also I have ensured that the Add_001.howto file points to the right location (C:\Program Files\Adobe\Adobe Photoshop CS3\Help\additional how to content)and is in the right format:
"John Shaws CS3" "47. A GLOSSARY OF IMAGING TERMS" 47.html (works).
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html (doesn't work)
The only thing new on the computer is a brand spanking new EVGA NVidia Geforce 9500GT PCI express(512 mb ddr2 dual DVI output) with the latest drivers. It replaced NVidia GeForce 6600GS and Matrox Millenium video cards (the Matrox). The new video card does not include some program that allows it to run MS-DOS programs, but I don't feel that is causing the problem.
System Info:
Photoshop CS3 10.0.1
Computer: Gateway DX310X with Gateway FPD1975W and FPD1730 monitors
Windows XP Media Center Edition, Service Pack 3
Intel Pentium D proccessor
1GB internal memory
168GB of free space on hard drive.
I hope I have given you suffiecient information to give me some possible solutions.
Thanks
Rick

Mylenium
Thanks for the assist.
It isn't a Windows Indexing Service problem.
It is an operator problem. As you pointed out the long name and spacing are the issue here.
I changed the the Add_001.howto file from:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html
to:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" NN001.html
I changed the file in the Additional How To Content folder, to match.
And it works now.
Now that I know what was wrong with my file names, I'll be able to get the various plugin help files/documents into Photoshop so I won't have to get out of it to get help on them.
Thanks
Rick

Warning for users of older versions of Java thinking of upgrading to 10.6

I'm a pediatric oncologist and I use a MacBook Pro at work for many aspects of patient care. We have web based system that allows us to look at radiology scans from any computer via a browser. This system requires Java 1.4.2 to work -- it will not work with newer versions of Java.
In OS X 10.5, I would simply switch to Java 1.4.2 when needed and back when I was done. Unfortunately, Snow Leopard only installs Java 1.6. This leaves me completely unable to look at scans from my MacBook Pro.
Off the top of my head, if there was a way to take the Java 1.4.2 package from OS X 10.5 and install it on OS X 10.6, and to use Java Preferences to switch between Java versions, that would be a great solution for me, even with the understanding that Java 1.4.2 is EOL'ed and that no updates would be expected.
Today I contacted Apple Support, and the official word is that there is no way to install Java 1.4.2 under Snow Leopard, and that my only option at this point in time is to go back to OS X 10.5.
Unless someone can figure out a way to hack Java 1.4.2 from OS X 10.5 into Snow Leopard, that is.

I was able to get Java 1.4.2 working with Safari in Snow Leopard tonight. Here's how to do it.
1. Install Java 1.4.2 as outlined in this link:
http://wiki.oneswarm.org/index.php/OSX_10.6_SnowLeopard
Alternatively, extract Java 1.4.2 from the Java For Mac OS X 10.5 Update 4 installation package, and install it in a similar manner:
http://support.apple.com/downloads/Javafor_Mac_OS_X_10_5_Update4
2. Make sure that Java 1.4.2 is the first 32-bit application in the list. Under Java Preferences, my list reads:
Java SE 6 64-bit
J2SE 1.4.2 32-bit
Java SE 6 32-bit
3. Open Safari in 32-bit mode via the Get Info window for Safari. This is where I was getting screwed up. It finally occurred to me that Java 1.4.2 is a 32-bit application, but if Safari was opening in 64-bit mode, it wouldn't use the 32-bit Java apps.
Once I opened Safari in 32-bit mode, Safari was able to use Java 1.4.2.

Estreamer generates error messages for "Failed to deserialize RUA Event"

Estreamer service on 3D System generates the following error messages for user activity data:
EventStreamer child(qradar.as.local):ConnectionHandler [ERROR] Failed to deserialize RUA Event 1004:1

This is a known issue. This issue is fixed on software version 5.2.0.3. Upgrading your 3D System to latest software version will fix this issue.
Note: Once the 5.2.0.3 patch is installed, you may still receive the RUA Deserialize error if the Defense Center contains older unified files prior to the 5.2.0.3 patch. Contact Technical Support for assistance in removing the older unified files.

Error while scheduling Background Job for User/Role Full Synchronization

Hi all,
We have installed RAR 5.3 Component and uploaded the authorization data & established the connectors to the backend system.
We have performed all the post installation activities and everything is complete.
When we have scheduled User -Full Synchronization with the Back End system as a part of Post Installation Activity we are receiving the below error message
"Error while executing the Job:Cannot assign an empty string to host variable 2."
Also the VIEW LOG/ Terminate Job buttons are disabled in this screen.
Can somebody please help us in resolving the above issue
Thanks and Best Regards,
Srihari.K

Hi,
We are copy pasting the error log (Part as it is huge) below here. We could able to do Full Synch for Roles and also for Profiles. Only for User Synch we are getting this error and none of the users are sychronized to RAR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WILSONA of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WINDC of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WLADICHJ of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WUK of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZENGS of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZHENGL of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: All System Flag:false=====Last Batch Flag:true
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis loadUserData
INFO: @@@ User sync completed for params true: Syskey List is [HL2-QAHR]
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob run
WARNING: *** Job Exception: Cannot assign an empty string to host variable 2.
com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 2.
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
     at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
     at com.virsa.cscext.dao.CSCDAO.updateIgnoredUserData(CSCDAO.java:1388)
     at com.virsa.cscext.dao.CSCDAO.populateGenObjUser(CSCDAO.java:1169)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.populateGenObj(BatchRiskAnalysis.java:868)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.insertBAPIUserData(BatchRiskAnalysis.java:142)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.loadUserData(BatchRiskAnalysis.java:390)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1275)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 13 Status: Error
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=13, status=2, message=Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>13----
Please let us know how to resolve this error
Thanks and Best Regards,
Srihari.K

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

SQL Error Log: Login Failed for User ''

Hi B1 experts,
currently i have a little problem with our SAP System or better SQL Server. Everytime when a SAP client is started, the SQL Server get the following warning message:
Login failed for user ''. Fehler bei der Anmeldung mit der SQL Authentifizierung. Der Server ist nur für die Windows-Authentifizierung konfiguriert. Client: IP
Fehler 18456, Schweregrad 14, Status 58.
The same message occurs when i log into sap. The funktionality of SAP is not impaired.
I have checked the server authentification mode and the sql server is SQL and Windows Authentification configured.
SQL Server: 2008 R2
SAP System: SAP B1 8.8 PL19
Client System: Windows 7
Someone any ideas?
Regards,
Sabine

Hi Rahul, Hi Julie,
thanks for your replys
@Rahul:
all named pipes are aktiv. the services are all on automatic mode
@Julie
Our Server is running with SQL authentication. We do not use trusted connection generally - security risk.
Further i have disables all Addon. the error occurs again.
We do not use the SBO Mailer, he isn't installed.
Regards,
Sabine

Udev error, warning for users...

Similar Messages

Maybe you are looking for