UDF for Splitting the nodes based on the field length

HI All,
Target records Record1 to Record4 must be created based on the length of the source field length i.e, if the source field length is only 90 then only 3 records must be created.maximum length of the source field is 120.The source and the target structure are as shown
Source                                  Target
Record                                Record(30)
      Field(120)    ------------->          Field1(10)
                                                 Field2(10)
                                                 Field3(10)
After mapping:-
        Source         ----------->        Target
Record                                Record1(0 to30)
      Field(120)    ------------->          Field1(0 to 10)
                                                 Field2(10 to 20)
                                                 Field3(20 to 30)
                                           Record2(30 to 60)
                        ------------->          Field1(30 to 40)
                                                 Field2(40 to 50)
                                                 Field3(50 to 60)
                                           Record3(60 to 90)
                        ------------->          Field1(60 to 70)
                                                 Field2(70 to 80)
                                                 Field3( 80 to 90)
                                           Record3(90 to 120)
                        ------------->          Field1(90 to 100)
                                                 Field2(100 to 110)
                                                 Field3(110 to 120)
Can any one provide me the code to get this done.
Thanks ,
Vikram

You need no UDF. You can use the substring function, but you should check the length of the string to prevent mapping errors due to the substring function.

Similar Messages

Splitting a file based on the payload field - multimapping

HI Everyone,
I have a requirement of splitting a file based on the field .
e.g When I am a file as :
row1 David US
row2 Cindra US
row3 Peeru CA
row4 Jay CA
Then, I have to split the file into two files, one file with the US rows and another file with the CA rows.
There can be many countries in the input file, so number of target files need to be generated is not fixed.
I have gone through the below links :
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible ( in the blog we know that there are two receivers but in my case I dont know that )
https://bond.newellco.com/irj/scn/,DanaInfo=www.sdn.sap.com,SSL+thread?messageID=6449801#6449801
( Everyone is providing JAVA mapping as a solution....)
Is Java mapping the only option to resolve the problem case I have ?
Thx
PEERU IN

Hi Peeru,
I don't have access to the any FTP or file server of XI to check the file adapter as i am travelling right now(I am 100% sure that the file adapter splitting will work as i have done this for one of my requirement).
Coming to your requirement:
I wrote an java map which will read the XML file and create the multiple recordset based on number of different country exists in the file, then i am printing the final structure in an multi mapping layout (please see the attached input file Country.xml and out put file which the java map generated Final.XML) if we do this i think the file adapter will create the different files based on the number of recordset we have as you can see the output file is generated with the 3 recordset (<Country>) tag each country tag has its own records, now if i give the filename in variable substuition pointing to region then i think i should get 3 files with names
us.xml
us01.xml
us02.xml
i think by using the multi mapping i can generate 3 files and by using the variable substution i can give the 3 different names from the payload of each file and also can add the timestamp for each of the file, again i didn't have access to the file adapter in the project i am working on so i couldn't verify in XI server, but if you still looking for solution then let me know i will give the map details.
Input File: Country.xml
<?xml version="1.0"?>
<check>
 <order>
 <name>Nisar1</name>
 <region>US</region>
 </order>
 <order>
 <name>Nisar2</name>
 <region>US</region>
 </order>
 <order>
 <name>Nisar3</name>
 <region>US</region>
 </order>
 <order>
 <name>Nisar4</name>
 <region>US01</region>
 </order>
 <order>
 <name>Nisar5</name>
 <region>US01</region>
 </order>
 <order>
 <name>Nisar6</name>
 <region>US01</region>
 </order>
 <order>
 <name>Nisar7</name>
 <region>US</region>
 </order>
 <order>
 <name>Nisar8</name>
 <region>US</region>
 </order>
 <order>
 <name>Nisar8</name>
 <region>US02</region>
 </order>
</check>
Output File : Final.XML
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <country>
 <Order>
 <name>Nisar1</name>
 <region>US</region>
 </Order>
 <Order>
 <name>Nisar2</name>
 <region>US</region>
 </Order>
 <Order>
 <name>Nisar3</name>
 <region>US</region>
 </Order>
 <Order>
 <name>Nisar7</name>
 <region>US</region>
 </Order>
 <Order>
 <name>Nisar8</name>
 <region>US</region>
 </Order>
 </country>
 <country>
 <Order>
 <name>Nisar4</name>
 <region>US01</region>
 </Order>
 <Order>
 <name>Nisar5</name>
 <region>US01</region>
 </Order>
 <Order>
 <name>Nisar6</name>
 <region>US01</region>
 </Order>
 </country>
 <country>
 <Order>
 <name>Nisar8</name>
 <region>US02</region>
 </Order>
 </country>
 </ns0:Message1>
</ns0:Messages>
regards
Nisar Khan

How to map the node id to the node name in database view just like "V$GES_RESOURCE"

i have a rac with 3 nodes,and the node id is from 1 to 3,i can check it with command olsnodes.
$ olsnodes -p -n -i
tdsdb1 1       tdsdb1-priv     tdsdb1-vip
tdsdb2 2       tdsdb2-priv     tdsdb2-vip
tdsdb3 3       tdsdb3-priv     tdsdb3-vip
and i also can check it in gv$instance
SQL> select inst_id,instance_number,instance_name from gv$instance;
   INST_ID INSTANCE_NUMBER INSTANCE_NAME
         1               1 jftds1
         3               3 jftds3
         2               2 jftds2
but when i select the master node of some resource ,it shows some value of node id =0
SQL> select resource_name,master_node from v$ges_resource;
RESOURCE_NAME                  MASTER_NODE
[0xdcc9fa12][0x246658a5],[QQ]            2
[0x932][0x70c230e],[IV]                  0
[0xd9fb][0x13181703],[IV]               0
[0xddae][0x0],[TM]                       0
[0xb970fb05][0x729b596a],[LB]            2
[0xb580][0x70c2e1c],[IV]                 0
[0x31ad56fb][0x7e4c3daa],[QQ]            2
[0x3][0x797609],[HW]                     0
[0x2bf04627][0xf28b1575],[QI]            0
[0x19c89f33][0xd06ef447],[QQ]            0
[0x529ae82][0x86e25d46],[QQ]             0
it seems that the master node id is from 0 to 2
i want to get the node name from the node id from   v$ges_resource,so i check the table cluster_nodes ,cluster_instances,but there are nothing.
SQL> select * from CLUSTER_NODES;
no rows selected
SQL> select * from CLUSTER_INSTANCES ;
no rows selected
how can i get the node name from the node id in the tables just like " v$ges_resource"? thank you .

my cluster ware version is 10.2.0.5
database version is 10.2.0.5
and the source of rac is all online
$ crsctl query crs activeversion
CRS active version on the cluster is [10.2.0.5.0]
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE    10.2.0.5.0      Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.5.0 - Productio
NLSRTL Version 10.2.0.5.0 - Production
$ crs_stat -t
Name           Type           Target    State     Host
ora.jftds.db   application    ONLINE    ONLINE    tdsdb2
ora....tds1.cs application    ONLINE    ONLINE    tdsdb1
ora....s1.inst application    ONLINE    ONLINE    tdsdb1
ora....ds1.srv application    ONLINE    ONLINE    tdsdb1
ora....tds2.cs application    ONLINE    ONLINE    tdsdb2
ora....s2.inst application    ONLINE    ONLINE    tdsdb2
ora....ds2.srv application    ONLINE    ONLINE    tdsdb1
ora....tds3.cs application    ONLINE    ONLINE    tdsdb3
ora....s3.inst application    ONLINE    ONLINE    tdsdb3
ora....ds3.srv application    ONLINE    ONLINE    tdsdb3
ora....SM1.asm application    ONLINE    ONLINE    tdsdb1
ora....B1.lsnr application    ONLINE    ONLINE    tdsdb1
ora.tdsdb1.gsd application    ONLINE    ONLINE    tdsdb1
ora.tdsdb1.ons application    ONLINE    ONLINE    tdsdb1
ora.tdsdb1.vip application    ONLINE    ONLINE    tdsdb1
ora....SM2.asm application    ONLINE    ONLINE    tdsdb2
ora....B2.lsnr application    ONLINE    ONLINE    tdsdb2
ora.tdsdb2.gsd application    ONLINE    ONLINE    tdsdb2
ora.tdsdb2.ons application    ONLINE    ONLINE    tdsdb2
ora.tdsdb2.vip application    ONLINE    ONLINE    tdsdb2
ora....SM3.asm application    ONLINE    ONLINE    tdsdb3
ora....B3.lsnr application    ONLINE    ONLINE    tdsdb3
ora.tdsdb3.gsd application    ONLINE    ONLINE    tdsdb3
ora.tdsdb3.ons application    ONLINE    ONLINE    tdsdb3
ora.tdsdb3.vip application    ONLINE    ONLINE    tdsdb3

How to control the measure based on the related dimension.

Hi Experts,
In order to improve performance, I have created three kinds of time tables in DB,such as Year .Month, Day.
Then import them into the physical layer in RPD, and combine them into one dimension in BMM.
Actually, it has three level fact related with three time tables,so they are also dragged into one fact in BMM,and one column will be corresponding with three column derived from different Fact table in physical layer.
So I want to know how to control the measure based on the related dimension.
For example:
when users drag the Year,Sales column, it will come from Year Dimension and Year Fact Table.
when users drag the Month,Sales column, it will come from Month Dimension and Month Fact Table.
when users drag the Day,Sales column, it will come from Day Dimension and Day Fact Table.

Hi,
Create a dimension Hierarchy, with Year >> Month >> Day Levels and
Next Double click on Year Table LTS >> click on Ocntetnt Tab >> set as Year
same way for Month LTS and Day LTS.
So now when you select year column then server canknow which LTS to hit and Hits Year LTS.
Mark If Helpfu/correct
Thanks.

How to get the node id of the content shown from campaign

Hi
Can any one please tell how to get the node id of the content shown by the campaign
in jsp
Thanks

One option is to define a custom ad renderer, which is registered with the proper mime-type.
The campaign would run your renderer if the campaign retrieved a node with a binary of the proper registered mime-type.
This allows you to insert yourself into the call chain for the node rendering. You can access the nodeID at that point (and do the typical rendering-- providing a URL for the ShowPropertyServlet)
-Steve

Get value from the array based on the HashCode

public static void runJoin(int[][] t1,int[][] t2)
 PrintWriter out=null;
 int rows = 1000;
 int cols = 7;
 int [][] myTable3 = new int[rows][cols];
 int x = 0;
 System.out.print("Running HashJoin:Method loads the "+
 "smaller table in the memory and applies a hashing function "+
 "to common column and stores it in another table. "+
 "The larger table is then read from the file. "+
 "The same hashing function is applied to Col n of the table and a matching record in the first table is looked up. A match will create a row in Table 3. ");
//Apply hashing function to smaller table and store it in the memory.
 Integer[] It2 = new Integer[t2.length];
 int [] hashCodest2 = new int[t2.length];
 Hashtable ht = new Hashtable();
 for(int i =0; i <t2.length;i++){
 It2[i] = new Integer(t2[0]);
 hashCodest2[i] = It2[i].hashCode();
 ht.put(new Integer(hashCodest2[i]),It2[i]);
 //Larger table get hashcodes
 Integer It1[] = new Integer[t2.length];
 int [] hashCodest1 = new int[t2.length];
 for(int j =0; j <t1.length;j++){
 It1[j] = new Integer(t1[j][4]);
 hashCodest1[j] = It1[j].hashCode(); }
 //Based on the hashcode get the value from the Table2;
 try{
out = new PrintWriter( new FileOutputStream( "c:\\HashJoinTable.txt" ) );
 Enumeration e = ht.keys();
 while(e.hasMoreElements())
//How do I get the value from the array based on the HashCode? Do I need to do a loop here???
hashCodes1.get(e.nextElement());
 }catch(Exception e){}

ok I got it......
 //Apply hashing function to smaller table and store it in the memory.
 Integer[] It2 = new Integer[t2.length];
 int [] hashCodest2 = new int[t2.length];
 Hashtable ht = new Hashtable();
 for(int i =0; i <t2.length;i++){
 It2[i] = new Integer(t2[0]);
 hashCodest2[i] = It2[i].hashCode();
 ht.put(new Integer(hashCodest2[i]),It2[i]);
 //Larger table get hashcodes and compare
 Integer It1[] = new Integer[t2.length];
 int [] hashCodest1 = new int[t2.length];
 Hashtable ht2 = new Hashtable();
 for(int j =0; j <t1.length;j++){
 It1[j] = new Integer(t1[j][4]);
 hashCodest1[j] = It1[j].hashCode();
 ht2.put(new Integer(hashCodest1[j]),It1[j]);
 //Based on the hashcode get the value from the Table2;
 try{
out = new PrintWriter( new FileOutputStream( "c:\\HashJoinTable.txt" ) );
 Enumeration e = ht.keys();
 Integer t3[] = new Integer[t2.length];
 while(e.hasMoreElements())
 t3[x] = (Integer) ht2.get(e.nextElement());
 x++;
 }catch(Exception e){}

I've to extract the data based on the sysdate...like today dd is 11,

BM_PERF is the table name and
BM_PERF_YR,BM_PERF_MONTH,BM_NOP_CT_1........BM_NOP_CT_31 are the column names.
I've to extract the data based on the sysdate...like today dd is 11
so i've to get data from BM_NOP_CT_11 and the column names changes dynamically based on the sysdate. don't use any procedures and functions.

You could always pivot it into a more convenient form for querying:
WITH t1 AS
     ( SELECT 2008 AS yr, 4 AS mnth
            , 20 AS dy1
            , 10 AS dy2
            , 15 AS dy3
            , 1 AS dy4
            , 17 AS dy5
            , 99 AS dy6
            , 55 AS dy7
            , 45 AS dy8
            , 33 AS dy9
            , 22 AS dy10
            , 74 AS dy11
            , 35 AS dy12
            , 62 AS dy13
            , 24 AS dy14
            , 85 AS dy15
       FROM dual )
   , t2 AS
     ( SELECT yr
            , mnth
            , sys.DBMS_DEBUG_VC2COLL
              (dy1,dy2,dy3,dy4,dy5,dy6,dy7,dy8,dy9,dy10,dy11,dy12,dy13,dy14,dy15)
              AS day_data
       FROM   t1 )
SELECT t2.yr, t2.mnth, sys_op_ceg(t2.day_data,5) day_value
FROM   t2;
        YR       MNTH DAY_VALUE
      2008          4 17
1 row selected.Note that SYS_OP_CEG (first discovered by Padders) is undocumented and unsupported - for production code you'd need to pick the collection row using a WHERE clause, and for that you'd need a custom object and collection type with an attribute to hold the day number.
Message was edited by:
William Robertson
...like this:
CREATE TYPE id_value_ot AS OBJECT
( id INTEGER, val NUMBER );
CREATE TYPE id_value_tt AS TABLE OF id_value_ot ;
WITH t1 AS
     ( SELECT 2008 AS yr, 4 AS mnth
            , 20 AS dy1
            , 10 AS dy2
            , 15 AS dy3
            , 1 AS dy4
            , 17 AS dy5
            , 99 AS dy6
            , 55 AS dy7
            , 45 AS dy8
            , 33 AS dy9
            , 22 AS dy10
            , 74 AS dy11
            , 35 AS dy12
            , 62 AS dy13
            , 24 AS dy14
            , 85 AS dy15
       FROM dual )
   , t2 AS
     ( SELECT yr
            , mnth
            , id_value_tt
              ( id_value_ot(1,dy1)
              , id_value_ot(2,dy2)
              , id_value_ot(3,dy3)
              , id_value_ot(4,dy4)
              , id_value_ot(5,dy5)
              , id_value_ot(6,dy6)
              , id_value_ot(7,dy7)
              , id_value_ot(8,dy8)
              , id_value_ot(9,dy9)
              , id_value_ot(10,dy10)
              , id_value_ot(11,dy11)
              , id_value_ot(12,dy12)
              , id_value_ot(13,dy13)
              , id_value_ot(14,dy14)
              , id_value_ot(15,dy15) )
              AS day_data
       FROM   t1 )
SELECT yr, mnth, dd.val
FROM   t2, TABLE(t2.day_data) dd
WHERE dd.id = 5;
        YR       MNTH        VAL
      2008          4         17
1 row selected.

How to group the output based on DAYS field

Hi
I am modifying the predefined ALV report "RFTMBL01" .I had added the days field to that report output and I have to group the output based on the DAYS field
Records within 0-10 days in one group
Records within 10-30 days in one group
Records above 30 days should be one group
No of days may repeat that means with no of days 10 .many records will be there
There is also a field by name "AMOUNT" in my output.
I have to calculate SUBTOTALs at the end of every group and at the end of the report i should caluculate GRAND TOTAL.
Please remember that i should not use any any BLOCKED ALVs and for Totals i should not use the SYMBOLS provided in the application toolbar of the report
Thanks in Advance

>>>The file has to be routed based on the Company Code
check with xpaths.
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
>>>different file should have different file name again based on the company code.
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii

Filter the report based on the date

Hi Experts,
i am working with alv report, I need filter the records based on the field.
So i tried like this.
data : t_filter TYPE slis_t_filter_alv,
       w_filter TYPE slis_filter_alv.
W_FILTER-FIELDNAME = 'WERKS'.
W_FILTER-SIGN0 = 'I'.
W_FILTER-OPTIO = 'BT'.
W_FILTER-VALUF_INT = '1003'.
W_FILTER-VALUT_INT = '1007'.
APPEND W_FILTER TO t_FILTER.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_INTERFACE_CHECK                 = ' '
    I_BYPASSING_BUFFER                = ' '
    I_BUFFER_ACTIVE                   = ' '
    I_CALLBACK_PROGRAM                = ' '
    I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_USER_COMMAND           = ' '
    I_CALLBACK_TOP_OF_PAGE            = ' '
    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    I_CALLBACK_HTML_END_OF_LIST       = ' '
    I_STRUCTURE_NAME                  =
    I_BACKGROUND_ID                   = ' '
    I_GRID_TITLE                      =
    I_GRID_SETTINGS                   =
    IS_LAYOUT                         =
     IT_FIELDCAT                        = IT_FIELDCAT
    IT_EXCLUDING                      =
    IT_SPECIAL_GROUPS                 =
    IT_SORT                           =
     IT_FILTER                          = t_filter
    IS_SEL_HIDE                       =
    I_DEFAULT                         = 'X'
     I_SAVE                            = 'A'
    IS_VARIANT                        =
    IT_EVENTS                         =
But it is was not get the output,
Pls help me how to write the code to filter the recodes.
if any one post the code.
Please help me.
Thanks Advance
    IT_EV

check the documentation of the fm
Table with filter criteria
Using this parameter, you can pass on filter criteria resulting from explicitly loading a display variant in advance, for example, to list output.
This table should never be set up 'manually'.
check these programs
BCALV_TEST_FULLSCREEN_FILTER
BCALV_TEST_LIST
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on Oct 24, 2010 10:41 PM

How to implement Check box in the Rtf based on the value from XML datafield

Hello All ,
It would be great if any one can help me in implementing check box in the rtf based on the data filed value from the XML data.
I need to get in the out put checked boxes like what we say Radio button Yes or No ( If Yes it should be marked ).
If any one worked on this please help us...
Thanks in Advance...

Did you check the user guide,
we have a section over there :)
http://blogs.oracle.com/xmlpublisher/2007/05/22

How to Handle and show multiple pushpin imgaes on the map based on the requirement at different coordintes?

How to Handle and show multiple pushpin imgaes on the map based on the requirement at different coordintes?
I have multiple images in my App folder. I want to use and show those images dynamically in windows phone 8 map application

There are a lot of different ways to do this. One simple method is to use a switch statement when creating your pushpins and based on some property in your data, select the icon you want to use and create your pushpin accordingly.
http://rbrundritt.wordpress.com

Is it possible to find the table based on the Date ?

Dear Team ,
Is it possible to find the table based on the Date ?
I have created an table ,But forgot the Table Name .
Is it possible to find the Tables created on particular Date .
Regards ,
Augustine

as date is record the time also below query will work.
select * from user_objects
where
object_type = 'TABLE' and
to_date(created,'DD-MON-YYYY') =to_date('<your date value in DD-MON-YYYY format>','DD-MON-YYYY');
Edited by: shaileshM on Feb 24, 2010 9:39 PM

Passing memory settings from the Node Manager to the Managed Server

All,
I am trying to start a Managed server from the Node Manager. The configuration is as follows:
I have a domain with two managed servers(M1, M2). I could start both of them using the shell scripts without any problems. Both of the servers has custom memory settings -Xms3072m -Xmx3072m -XX:PermSize=256m
to facilitate deployment and effective operation of managed servers (the applications being deployed are kind of large).
Now, I am trying to start the same two servers using Admin Console:
In the admin console: I created a Unix Machine(U1) assigned the managed servers (M1, M2) to U1. I started the Node Manager on U1.
When I try to start a Managed Server from console, the server is starting but the memory settings (-Xms3072m -Xmx3072m -XX:PermSize=256m ) are not passed to the managed server startup, so the application deployment is failing with out of Memory errors. I tried to assign same memory settings to Node manager assuming it will pass on that configuration to the node manager without any luck.
Any help is appreciated.
Thanks
Raj

Starting Managed Server from Node Manager

What is the best way to declare field length 500 in internal table?

Hi all,
what is the best way to declare field length 500(constant value allways) in internal table?
I am trying to send data from internal table to file format, and I have a field in internal table with 500 length (constant value always). So how do I can declare and append this field value to table?
Thanks
Murali

Hi. Please see the following example program, notice how I am filling the field with the constant value.
report zrich_0001.
* CLASS lcl_main DEFINITION
class lcl_main definition.
public section.
 types: begin of ttab,
 fld1(500) type c,
 end of ttab.
 data: itab type table of ttab.
 data: xtab type ttab.
 methods: constructor,
 write_itab.
endclass.
* CLASS lcl_main IMPLEMENTATION
class lcl_main implementation.
method constructor.

 xtab-fld1 =
 'This is one part of the total string which needs to be really' &
 ' long and this is a constant and we need to move it to a work' &
 ' area and then append it to the internal table which has a' &
 ' field with a length of five hundred characters'.
 append xtab to itab.
endmethod.
method write_itab.
 loop at itab into xtab.
 write:/ xtab-fld1.
 endloop.
endmethod.
endclass.
data: o_main type ref to lcl_main.
start-of-selection.
create object o_main.
call method o_main->write_itab.
Regards,
Rich Heilman

Process to split production order based on the raw material batches

Hi All, below is a business situation which needs some some SAP process to help overcoming this issue.
We are working on process industry, where the core fabric (SFG) are produced from different machines and which are used as raw material in the subsequent process (Coating). Business wants SAP to generate individual planned orders for Coating when it uses this materials
e.g
Current situation.
SFG1 is the component of SFG2
SFG2 is the component of FG.
When the demand for FG is 100, you get 2 planned orders SFG1- 100 yd and SFG2- 100 yds
During production, the Planned order for SFG1 is split for 2 production order each producing 50 yds each.
Now I have SFG1 - 50 yds ( Batch A001), and SFG1- 50 yds ( Batch A002).
Now Business wants SAP to automatically propose 2 order for SFG2, However based on MRP it will only show 1 planned order of 100 yds required for SFG2 since the demand of FG is 100.
We want to split the planned orders of the higher level to look at lower level stock.
Any ideas or thought process.
Regards
Sarvan

Sarvan,
You can have MRP propose two lots of SFG2 based upon lot sizing. For instance, if you always will want SFG2 to have orders of 50 each, then one way to achieve this would be to set the 'maximum lot size' to 50. MRP1 Tab of the material master.
There are other lotsizing methodologies that may be better suited to your business requirements as well.
Lot-Size Calculation - Consumption-Based Planning (MM-CBP) - SAP Library
Best Regards,
DB49

UDF for Splitting the nodes based on the field length

Similar Messages

Maybe you are looking for