Ufsdump acros ssh session seems to get corrupted
Hi,
I am trying to perform a ufsdump to a remote tape device by piping it through an ssh session to a server with an LTO drive locally attached.
ie. ufsdump 0uf - / | ssh tapedump@tapeserver /usr/bin/dd bs=32k "of=/dev/rmt/0un"
It completes succesfully but when I go to do a ufsrestore on the tape server I get errors such as:
"Media read error: not enough space"
"Read error while restoring <directory file - name unknown>
just wierd stuff like this so I am suspecting corruption.
I really don't want to use rmt if at all possible :-)
The user "tapedump" is a member of the local "sys" group on the tape server.
If (as root) I run a similar command on the tape server
ie. ufsdump 0uf - / | /usr/bin/dd bs=32k "of=/dev/rmt/0un"
but ofcourse not using ssh it works a treat, no errors when using ufsrestore.
Any ideas anyone? Anyone done this sort of thing before ?
Cheers
Rob
Tried the ufsrestore command below with blocking factor of 64 which I believe is correct (512byte records * 64 = 32k)
# ufsrestore ibf 64 /dev/rmt/0
However it produces the error:
resync restore, skipped 11 blocks
resync restore, skipped 225 blocks
resync restore, skipped 4 blocks
resync restore, skipped 10 blocks
resync restore, skipped 10 blocks
resync restore, skipped 10 blocks
resync restore, skipped 20 blocks
resync restore, skipped 22 blocks
resync restore, skipped 10 blocks
Bus Error (core dumped)
Not specifying a blocking factor at all (ie. ufsrestore if /dev/rmt/0) which I assume should default to 32K yeah, produces the error
"Read error while restoring <file removal list>"
Similar Messages
-
Canon Raw (CR2) files seem to get corrupted after some times
Hello
I use a fully registered Lightroom 5.3 with my Canon 5D Mark III, and I have this kind of corruption on some of my CR2 files from times to times. If i reimport the .cr2 file in another catalog or even on another the resulting file is still corrupted.
The wierdest thing is that the original import was successful and I successfully exported it several times correctly. The corruption should have happens afterward:
Do you have any idea where does this comes from? This is absolutely inacceptable from a professional software.
PS: I had this kind of curruption with an old version of Lightroom with my previous pentax K7d, but I though this was past
Thanks you very muchGaetan St wrote:
Do you have any idea where does this comes from?
Yes, -failing hardware (typically disk or ram).
Gaetan St wrote:
This is absolutely inacceptable from a professional software.
The software is not corrupting them, it's just revealing existing corruption. (yeah, I know some apps can still display the jpeg preview without revealing the corruption, still... - Lr is a raw editor..).
~R. -
Nikon D4s images get corrupted
When I work with my D4s raw images in Lightroom 5.4 (latest update), they seem to get corrupted.
Images are imported and while browsing them, I sometimes get a notification that there is an unexpexted end of file for certain images. Also some images look completely corrupted. They are very bright and have vertical color bands.
Once I have this message on my images, Photoshop CS6 can't open them anymore with the same kind of message.
If I take the CF card with the original raw files and I open them with another software such as Nikon NX or photomechanic, I can work with these images and nothing goes wrong. So the current work around is converting to TIFF in either of the previous mentioned softwares and then importing in LR.
But is there a permanent solution? I would love to have my raw files in LR!
And what about the files that have been corrupted? Is there a way to recover them? I don't have all the original raw files anymore
Thanks,
JeromeJeromeG wrote:
Once in lightroom and working with the images, some of them suddenly showed as corrupt.
Theoretically, Lightroom is bullet-proof, and just like it says on the wrapper: won't write raw files and so can't corrupt them. The cause of such behavior is therefore hardware.
That said, and at the risk of suffering a spanking from Jeff Schewe, it sure does seem like there is an inordinate number of such reports - there's either a lot of bad hardware out there, or Lr has a nasty bug that's currently being denied (publicly anyway).
I hope Jeff Schewe is right: such bug is impossible (virtually, essentially, for all practical purposes anyway..), and if such bug were being investigated by Adobe, they would make sure it was well known by all users via the forums & journal etc. (uh-huh).
Anyway, even if there is a bug in Lightroom, many (probably all) of these problems are caused by failing hardware (or other system problem), so that's the first thing to assume/check.. - disk & ram are perhaps the most common source of such anomalousness.
Beware: initial image in Lightroom is from jpeg preview NOT raw rendering. So, it could be these images were corrupt before they reached Lightroom (even though they looked fine in Lightroom initially) - depends on what you were able to do with them in Lightroom before the corruption became apparent.
Cheers,
Rob -
Everytime i try and download any apps i get an error message telling me that part of the file seems to be corrupted. How do i resolve this issue
Could be.
This may be hard to believe, but I think my problem was that the built-in WiFi adapter on my HP desktop had
gotten flaky. I switched to a Buffalo USB WiFi and the problem immediately disappeared. I never saw any errors, etc. from the Ralink adapter. Strange. Might try another type of connection to the Internet. -
I was having issues with syncing my 80G video iPod, so I restored it, and now all my songs in my library are "corrupted" and I can't get them back on my iPod. I keep getting error(-69). How did my songs all get corrupted, and how do I fix this without having to purchase these songs all over again?
Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time; you can see what content you can download here:
http://support.apple.com/kb/HT5085
You can also re-download content using an iOS device.
For more information, see:
http://support.apple.com/kb/ht2519
This if course will not apply to songs you did not buy through the iTunes Store.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
Roaming profile gets corrupted after password change during session logon.
When users are force to change password during logon (after it has expired) their roaming profile gets corrupted. All workstations are Windows 8 and domain is Server 2008 R2. The delete cached profile copies policy is enabled and therefore the issue matches
exactly with http://support.microsoft.com/kb/971338/en-gb except it's the wrong OS.
I've been trying to find a hotfix for Windows 8 without any luck so just wondering if anybody managed to get around this issue.Hi,
Have you tried the workaround method in the link? did it worked? Actually, form now, there is still no helpful hotfix to fix this problem.
In addition, what about change password from other client? not Windows 8.
Roger Lu
TechNet Community Support -
Some pictures in I-Photo seem to be corrupted. When I click on them, they come up for a second, then turn black with a white circle in the middle and what looks like an explanation mark. There does not seem to be any rhyme or reason to the photos that are a problem, some older ones, some newer, some albums have none, some albums have a lot.
Thanks,
Marktime to time (when I have a chance), I will go to Finder, bring up ALL Images and start going through them to label them (before I put a label on them, they are simply listed as 123 jpg, 124 jpg etc.).
You're damaging the Library doing that, and that's the cause of your problem.
Never, ever, ever use the All Images search and work on items in yoyr iPhoto Library. They must only be accessed via the iPhoto window.
Restroe from abck up or try rebuild the Library:
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Next: You need to learn how to use iPhoto. There's no need to be dragging things to the desktop:
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491 -
Screen Sharing and SSH sessions freeze occasionally on multiple mac minis
I have 28 Mac Minis at work. With such a large number of minis, I obviously can't have a monitor attached to each of them so I've got them plugged into a network switch and access them via Screen Sharing (both via regular Screen Sharing and ARD) and SSH sessions.
A few of them seem to suffer from intermittent problems however. I'll be using Screen Sharing when the session freezes. It may unfreeze eventually, but I can also usually just quit out and re-connect and it will be unfrozen. The same thing happens when I'm connected via SSH, it will freeze and I won't be able to type in any more commands.
I need help troubleshooting (or if anyone knows what could be causing this, that'd be cool too).
I've tried connecting from both a Mac Pro on the wired network and a MacBook Pro on the wireless network. The freezing seems to only happen on certain Mac Minis as well.
I've tried switching network cables from a Mac Mini that doesn't suffer from this problem with one that does and nothing changed.
I also thought it might be a bandwidth issue at first, despite being a gigabit switch connected via cat6 to the rest of our gigabit network, but even when no significant bandwidth is being used, the freezing still occurs.
One more thing I want to test is the connection between the switch all these Mac Minis is plugged into and one of the other switches that all our other network traffic goes through. I didn't set it up myself so I fear that it might be an old, damaged cable or something. Failing that, I have no idea what the problem could be, which is why I'm posting here.
So, does anyone have any idea what the problem could be? Or any other ideas for troubleshooting the problem? Thanks.
(They're all running 10.6.8, and range from Mid-2007 to 2009 models).It would be in the system log. However, the next step would be to safe-boot in order to eliminate third-party system modifications. That goes for both client and server. If you can reproduce the problem in safe mode, then you probably have a network issue. Take everything offline except one client and one server, and test.
-
Can't download music because ""File seems to be corrupt.''
In the past 24 hours I have attempted to download 3 songs from iTunes, but get this message: ""The file seems to be corrupted. To redownload the file, choose ""Check for Purchases'' from the store menu.'' When I do that, the same message comes back again and again. iTunes has already sent me a receipt and charged me for the downloands, yet I haven't actually received them. Any suggestions/explanations?
the same thing has happened to me. i tried to download the same song 2 days ago and i was charged but when i try to download it it gives me that notice. my sister said that happened to her and you have to repurchase the song but its not really fare because you have to purchase the song twice.
-
ACE 4710. Unable to clear ssh sessions
Hi.
Once in the CLI of an ACE 4710, using the command "clear ssh session id" I am unable to clear/kill any of the remote ssh sessions established.
According to the administration guide, the "clear ssh .." command must clear the sessions, but it does not, or maybe I am missing something?
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA1_7_/configuration/administration/guide/access.html#wp1050335
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Tabla normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
ACE/CONTEXTO_A# show ssh session-info
Session ID Remote Host Active Time
13728 222.98.54.158:50556 67:43:38
13732 200.44.158.70:46172 67:43:36
13735 200.44.158.70:46174 67:43:36
13737 200.44.158.70:46177 67:43:36
ACE/CONTEXTO_A#
ACE/CONTEXTO_A# clear ssh 13728
ACE/CONTEXTO_A# clear ssh 13732
ACE/CONTEXTO_A# clear ssh 13735
ACE/CONTEXTO_A# clear ssh 13737
ACE/CONTEXTO_A# show ssh session-info
Session ID Remote Host Active Time
13728 222.98.54.158:50556 67:43:54
13732 200.44.158.70:46172 67:43:52
13735 200.44.158.70:46174 67:43:52
13737 200.44.158.70:46177 67:43:52Hello,
Seems to be working for me in my tests. Works in the Admin context and a user context, and when clearing connections from console connection or one of the SSH sessions.
ace-appliance-15/CTX1# sho ssh sess
Session ID Remote Host Active Time
24705 161.44.77.245:1586 0: 1:42
25100 161.44.77.245:1589 0: 0:27
25116 161.44.77.245:1590 0: 0:16
ace-appliance-15/CTX1# clear ssh 25116
ace-appliance-15/CTX1#
ace-appliance-15/CTX1# sho ssh sess
Session ID Remote Host Active Time
24705 161.44.77.245:1586 0: 2: 5
25100 161.44.77.245:1589 0: 0:50
What version of software are you running on your 4710? I am running the latest A3(2.4). Can you try this version?
Thanks,
Sean -
There was a problem downloading song. The file seems to be corrupted.
Hi
I'm trying to download an album i purchased but i'm constantly getting the message "There was a problem downloading X. The file seems to be corrupted" for every song I try to download. Also if i try to stream the song it says "This computer is not authorized to play X. Would you like to authorize it". But my computer is already authorized and when I try to authorize it again, it says this computer is already authorized.
I've tried downloading them through the purchased section of the store (which causes itunes to crash 50% of the time) with no luck. I've also reinstalled itunes. This only started happening once I installed the latest version of itunes.
Any help would be appreciatedI'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
PDF file gets corrupted when generated from BSP
Hi,
I am generating a PDF file from a BSP page ( see the code below). The problem is that PDF file gets corrupted and I am unable to open it. I also tried to use other functions like GUI_Download and DOwnload as suggested by many and they also do not work either. Has any one generated a PDF from BSP and can some one help?
Data: GG type String.
event handler for data retrieval
data : event type ref to cl_htmlb_event.
class cl_htmlb_manager definition load.
class CL_HTTP_RESPONSE DEFINITION LOAD.
DATA : PARAMS TYPE PRI_PARAMS,
VALID TYPE C,
GV_SUCCESS_SPOOL_NO LIKE SY-SPONO.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCL'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'Test NEW-PAGE PRINT ON'
IMMEDIATELY = ''
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 140
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = 'X'
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG.
write :/ 'Hello Message1'.
write :/ 'Hello Message2 '.
NEW-PAGE PRINT OFF .
ENDIF.
data : spool_no TYPE TSP01-RQIDENT .
spool_no = sy-spono.
DATA: itab TYPE TLINE,
witab TYPE TABLE OF TLINE,
output TYPE STRING,
outputx TYPE XSTRING.
data : l_pdf_len type i.
data: mi_bytecount type i.
DATA : APP_TYPE TYPE STRING VALUE 'APPLICATION/PDF' .
DATA: cached_response TYPE ref to if_HTTP_RESPONSE.
data : l_display_url type string .
data : guid type GUID_32 .
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_no
NO_DIALOG = 'X'
IMPORTING
PDF_BYTECOUNT = mi_bytecount
TABLES
PDF = witab
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 8
ERR_BTCJOB_SUBMIT_FAILED = 9
ERR_BTCJOB_CLOSE_FAILED = 10
others = 11.
if sy-subrc EQ 0.
LOOP AT witab INTO itab.
CONCATENATE
output
itab-tdline
INTO output in character mode.
ENDLOOP.
endif.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = output
mimetype = 'APPLICATION/PDF'
IMPORTING
buffer = outputx.
concatenate cl_abap_char_utilities=>byte_order_mark_little
outputx
into outputx in byte mode.
response->set_header_field( name = 'content-type' value =
'APPLICATION/PDF; charset=utf-16le' ).
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name = if_http_header_fields=>expires
response->delete_header_field( name = if_http_header_fields=>pragma )
response->set_header_field( name = 'content-disposition'
value = 'attachment; filename = TEST.PDF'
l_PDF_len = xstrlen( OUTPUTX ).
response->set_data( data = OUTPUTx
length = l_PDF_len ).
navigation->response_complete( ).
Regards
Amit AgrawalHI Craig Cmehil,
I have tried this code as well as given in the URL specified by you. But using this also browser shows the following content. It seems that PDF content is corrupted.
My Output as shown on Browser Starts below this line----
DF-1.3
%âãÏÓ
2 0 obj
/WinAnsiEncoding
endobj
3 0 obj
<<
/Type /Font
/Subtype /Type1
/BaseFont /Courier
/Name /F001
/Encodg 2 0 R
>>
endobj
4 0 obj
<<
/Length 5 0 R
>>
stream
/F001 7.30 Tf 0 0 0.753 rg BT 18.00 570.65 Td 0 Tw <33302E30362E3230302020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020>Tj ET 0 0 0.753 rg BT 2950 570.65 Td 0 Tw
<20204854545020436F6E74726F6C202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020>Tj ET 0 0 0.753 rg BT 572.40 570.65 Td 0 Tw <2020202020202020202020202031>Tj ET q 0 0 0 RG 0.55 w 18.00 562.90 m
634. 562.90 l S Q 0 0 0.753 rg BT 18.00 551.45 Td 0 Tw <48656C6C6F20416D6974>Tj ET 0 0 0.753 rg BT 18.00 541.85 Td 0 Tw <48656C6C6F204765726176>Tj ET
endstream
endobj
5 0 obj
624
endobj
6 0 obj
<<
/Type /Page
/MediaBox
/Parent 1 0 R
/Resource
<<
/ProcSet
/PDF /Text
/Font
<<
/F001 3 0 R
>>
/XObject
<<
>>
>>
/Contents 4 0 R
>>
endobj
7 0 obj
<<
/Author (AMG )
/CreationDate (20050630 181301)
/Creator (Form X_58_170 EN)
/Producer (SAP R/3 Release 620 )
%SAPinfoStart TOA_DARA
%FUNCTI=( )
%MANDANT=( )
%DEL_DATE=(00000000)
%SAP_OBJECT=( )
%AR_OBJECT=( )
%OBJECT_ID=( )
%FORM_ID=( )
%FORMARCHIV=( )
%RESERVE=( )
%NOTIZ=( )
%SAPinfoEnd TOA_DARA
>>
endobj
1 0 obj
<<
/Type /Pages
/Kids
[ 6 0 R
/Count 1
>>
endobj
8 0 obj<<
/Type /Catalog
/Pages 1 0 R
/PageMode /UseNone
>>
endobj
xref
0 9
0000000000 65535 f
0000001801 00000 n
0000000017 0000n
0000000052 00000 n
0000000157 00000 n
0000000840 00000 n
0000000862 00000 n
0000001048 00000 n
0000001869 00000 n
trailer
/Size 9
/Root 8 0 R
/Info 7 0 R
>>
startxref
1944
%%EOF
Browser Displey Content Ends----
My Coding Starts----
Data: GG type String.
event handler for data retrieval
data : event type ref to cl_htmlb_event.
class cl_htmlb_manager definition load.
class CL_HTTP_RESPONSE DEFINITION LOAD.
DATA : PARAMS TYPE PRI_PARAMS,
VALID TYPE C,
GV_SUCCESS_SPOOL_NO LIKE SY-SPONO.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCL'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'Test NEW-PAGE PRINT ON'
IMMEDIATELY = ''
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 140
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = 'X'
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG.
write :/ 'Hello Amit'.
write :/ 'Hello Gaurav '.
NEW-PAGE PRINT OFF .
ENDIF.
GV_SUCCESS_SPOOL_NO = sy-spono.
data : spool_no TYPE TSP01-RQIDENT .
spool_no = sy-spono.
write: GV_SUCCESS_SPOOL_NO.
*write: spool_no.
IF display_type = 'convertspool'.
DATA: itab TYPE TLINE,
witab TYPE TABLE OF TLINE,
output TYPE STRING,
outputx TYPE XSTRING.
data : l_pdf_len type i.
data: mi_bytecount type i.
DATA : APP_TYPE TYPE STRING VALUE 'APPLICATION/PDF' .
DATA: cached_response TYPE ref to if_HTTP_RESPONSE.
data : l_display_url type string .
data : guid type GUID_32 .
spool_no like TSP01-RQIDENT .
*spool_no = GV_SUCCESS_SPOOL_NO .
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_no
NO_DIALOG = 'X'
IMPORTING
PDF_BYTECOUNT = mi_bytecount
TABLES
PDF = witab
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 8
ERR_BTCJOB_SUBMIT_FAILED = 9
ERR_BTCJOB_CLOSE_FAILED = 10
others = 11.
if sy-subrc EQ 0.
LOOP AT witab INTO itab.
CONCATENATE
output
itab-tdline
INTO output in character mode.
ENDLOOP.
endif.
*write : output.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = output
mimetype = 'APPLICATION/PDF'
IMPORTING
buffer = outputx.
*concatenate cl_abap_char_utilities=>byte_order_mark_little
*outputx
*into outputx in byte mode.
CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
some Browsers have caching problems when loading Excel Format
response->set_header_field( name = 'content-type' value =
'APPLICATION/PDF' ).
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name = if_http_header_fields=>expires
response->delete_header_field( name = if_http_header_fields=>pragma )
l_pdf_len = xstrlen( outputx ).
cached_response->set_data( data = outputx
length = l_pdf_len ).
cached_response->set_header_field( name = if_http_header_fields=>content_type
value = 'application/pdf' ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 180 ).
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = guid.
CONCATENATE runtime->application_url '/' guid '.pdf' INTO l_display_url.
cl_http_server=>server_cache_upload( url = l_display_url
response = cached_response ).
RETURN.
My Coding Ends----
Any Further help on this.
Regards
Amit Agrawal -
Applying presets causes filter settings to get corrupted if process version updated
I have an ongoing problem with Lightroom 5.7 including earlier versions. The problem occurs when editing photos which use previous process versions (ie, 2010). My presets all have the Current Process version checked (as they should). Whenever I apply any preset to a photo, the settings for existing filters get corrupted (reset to 0). This includes my Graduated Filter settings, Adjustment Brush settings and Radial Filter settings. Those filters and their masks remain on the photo but their parameters have all been set to zero. I keep falling into this trap since it's natural to use my presets when making updates to photos. Often I don't realize this occurred until it's too late.
As a work-around (inconvenient) I can first manually update to the current process by right-clicking the photo and saying Settings/Update to Current Process (2012). Or by clicking the Lightening Bolt button in the upper right corner. But this must be done prior to applying any presets and I typically for get as my database has tens of thousands of pics. Even a preset with just the Process Version set will cause the filter settings to be corrupted. I'm not interested in applying a batch or Quick Develop process to all at once since I need to inspect each one as the process is updated. It would be great if this could be fixed in a maintenance release since it keeps biting me. I think it's important that this be fixed in LR 6.0 also. No doubt it's messed up many user's photos without them realizing it. Does anyone know a work-around so Presets can be used?
System: Win7 pro 64 (current), 4.2 GHz i7, 12GB, Lightroom 5.7.In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob -
Song won't download because the "File seems to be corrupt". Now what?
I purchased a song through iTunes and am trying to download it on my PC. The song tries to download 4 TIMES, then displays an ERROR MESSAGE that THE SONG COULD NOT BE DOWNLOADED. THE FILE SEEMS TO BE CORRUPT. RETURN TO THE "CHECK FOR AVAILABLE DOWNLOADS" IN THE STORE MENU. I have done this several times. NO CHANGE, ALWAYS THE SAME ERROR MESSAGE. What do I do next. I either want the song to correctly download or get a refund for the purchase. Please Help.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
SQL Anywhere 11 databases are getting corrupt
Hi
We are having problems with databases that are getting corrupted.
We have a server that runs a SQL Anywhere 11 database. (the consolidated database)
Beside that, we have about 15 remote databases that run on the laptops of our mobile workforces.
To keep all databases in sync, we have setup a two-way server-to-laptop replication.
For the replication process we use “SQL Remote”.
Each laptop should replicate his data once in about 1 or 2 weeks.
For exchanging the messages we use the message type “file”.
This year we already experienced 6 times that a remote database got corrupt after replication. (after running dbremote.exe).
The log file of the dbremote utility does NOT show any errors, the replication seems to be finished without any problems.
But after this, it’s not possible anymore to connect to the database, because of the following assertion error:
[Sybase][ODBC Driver][SQL Anywhere]Internal database error *** ERROR *** Assertion failed: 201501 (11.0.1.2376)
Page 0x0:0x7182d1 for requested record not a table page -- transaction rolled back
Error code=-301
SQL state=HY000
Can someone tell me more about this error?
What goes wrong and why?
Or does someone has some tips on how to prevent this or tips on how I can do some analyzing myself to see what exactly got broken in the database?
Any help is appreciated.
Thanks.Hi Krenton,
Page 0x0:0x7182d1 for requested record not a table page -- transaction rolled back
Error code=-301
SQL state=HY000
Can someone tell me more about this error?
Specifically, the page at offset 0x7182d1 in database (So if you have a 4KB page size, this would be byte offset 7439057 x 4096 = 30470377472 into the database) in 0x0 (the main database running) has a page header that indicates that the data on the page is not table data. We don't know what it is, but the signature for table information connected to the table you're scanning is 'not as it should be'.
What goes wrong and why?
In the real world, lots of things can go wrong. I list some of the possible things on this question here on the SQL Anywhere forum. This list can include software bugs, but can also include instances where the media is not respecting write-through or write-ordering - see http://scn.sap.com/docs/DOC-34090 (SQL Anywhere I/O Requirements for Linux and Windows) for more details.
There are also known instances where Intel drivers are not set with the correct write-through settings. The details of this are in the documentation: DocCommentXchange (Improving Robustness on Intel storage drivers).
Technical Support should still provide assistance. If the problem is a newly-discovered bug in SQL Anywhere 11, their advice will be to apply a more recent EBF or upgrade to a new version. However, that is unlikely in this case.
Breck is correct - it would probably be best to take a look at the database file in technical support for more clues as to what's happening here. With the current information, it's hard to say more than "something was not correct at the time the page was looked at by the database server."
Regards,
Jeff Albion
SAP Active Global Support
Maybe you are looking for
-
Migrate a Local User Account to a Network Account Shell Script
http://support.apple.com/kb/HT5338?viewlocale=en_US&locale=en_US If you are looking for an easy way to migrate local users to network users without losing data, then try this script. Follow steps 1-10 in the support link above before running this scr
-
Can't load images under Linux with JavaFX img url
I have a simple Imageview ImageView { x: bind mouseX y: 200 //fitWidth works better than transforms fitWidth: 200; fitHeight: 200; image: bind img //transforms: [ // Scale {x: bind myScaleX, y: bind myScaleY}] //Reflection effect effect: Reflection {
-
Problem loading elements--AIR a problem, don't know where or what energy pane is
Can anyone help?
-
Is there a way to send to MBP screensaver to the Apple TV? I like the fireplace and acquarium.
-
Using XMLencoder/decoder to save GUI -- why?
In my last project, I spent a good deal of time writing functions to save and load a project to a local XML file with my own XML format (I was not using Java for this project). I just began looking into XMLEncoder and XMLDecoder and I wrote a simple