UI not fully updated after transitions (only on Linux)

After a transition of an object  the UI is not fully updated. One can still see "lines" from the "movement".
This only happens on Linux (Debian) and not on Windows. Is this a known issue that has been fixed in later Javafx releases ?
I am still using Java7 because of WinXP support
Thanks for help

> Is this a known issue that has been fixed in later Javafx releases ?
I don't know, try a later JavaFX release and see. 
If you still have an issue, create a reproducible, minimal, executable test case and log a bug with the test case and your full environment details - full Java version (e.g. 7u75), OS version,  graphics hardware, graphics driver version, etc.
Using Java 7 is not advised because it will cease to be publicly supported in about month.
There are many JavaFX bugs which were fixed for Java 8 which will never be fixed for Java 7.
Supporting Windows XP is not advised as not even Microsoft support that.

Similar Messages

  • HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

  • Stock not getting updated after confirmation of order

    dear all
    In our scenario x is final product.x1( semifinished),x2(spare) are dependent materials for final product. x1 has bom r1 and r2 (raw materials).I put all x1,x2,r1,r2 stock available in storage.
    To get final product , only final assy of above materials by labour.PIR (md61) created for x and planning run.After planning run, planned order generated for x and converted in to production order and released.
    My requirement is on confirmation of production order, backflushing of dependent materials as per bom should be done.
    On confirmation of order in co15,saved.But, stock is not getting updated.what might be the reason? please give me some solution

    Hi
    1.Set the Back Flush Indicator in your Material Master for the components. ( You can do this in Work center and Production Order too )
    2. You can also set the flag for the field " All Components" in Order Confirmation Parameters (OPK4).
    3. If you want to post the Fert also at the time of confirmation use the Control Key which has " Auto GR"  enabled.
    While confirming the Order press the Button "Goods Movement" to ensure that the components are present there for the movement.
    Regards
    Krishna
    Regards
    Krishna

  • All Game Center friends' status says "Never Played" and not be updated after restoring iphone

    I restored my iphone today, and after that, recent game activity line of all of my friends on my game center friends list shows "Never Played" and has not been updated.
    Is there anyone saw this issue and found any solutions?

    added more description as below:
    Just in case, the following is what I did/saw :
    1. I already upgraded ios 5.1.1 and there's no problem about Game Center before restoreing ios.
    2. I restored ios(iphone 4s) via iTunes ( ver. 10.6.1.7) on windows pc
    3. After finishing the restore (I tried it with  both backup and as-new-setup), launch Game Center app and log-in as my Game Center ID
    4. Open "Friends" tab and see the friend list on the left of the screen
    5. See description below all friends' name shows "Never Played"
    I tried log-out and re-login Game Center, but this wasn't fixed.
    I feel very sad to see my Game Center ID looks broken.
    But I'm also guessing this issue comes from Game Center's server side, because this worked fine before restoring ios.

  • ASN not gettting updated after Workorder completion phase

    Hi ,
    I am doing workorder collaboration scenario. But after completion of the phase and when i complete transportation phase (shipping) , ASN should get generated in the background and it should update the conformation control key with inbound delivery in Purchase order in ECC.
    But it is not happening , I dont know how to check whether the ASN is created in the background in SNC , The ASN is not getting updated in ECC in PO .
    Can anybody help me to resolve this issue.
    Thanks and Regards
    shailesh

    Hi Shailesh
    I think first step would be to check whether ASN is getting created in SNC - you may go to Web GUI -> Delivery -> ASN -> ASN Details. If you do not see any ASN there, the issue might be from supplier side.
    How are you bringing ASN to customer's SNC system  -
    1) Creating directly in Web GUI (as Nitin has mentioned)
    2) Bringing as XML message from supplier
    3) Using EDI or other third party system
    Thanks,
    Prasun

  • Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

    Hiiii,
    In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
    Best Regards,
    Sridhar . P

    Dear Heagal,
    I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
    1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
    2. Removed Credit groups for Delivery Type.
    3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
    I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
    Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
    If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and  Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
    Best Regards,
    Sridhar

  • Firefox will not fully open with US Mil LPS Linux

    I was just running US Mil LPS Linux from USB stick...Firefox would not fully open. i.e., I was unable to see the top of the browser for all options. Pls advise and many tnx

    Does that version creates and uses its own profile folder or does it use the default profile folder from the installed release version?
    *http://kb.mozillazine.org/Profile_Manager
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • After installing IOS 7.3 my updates stay on the update list and  my iiPad will not fully charge after turning my iPad off and leaving it plugged in all night. It only charges 79%.

    Why do my recent app updates stay on the update page after updating?
    Why won't my iPad take a full charge after installing IOS7.3?

    Having the updated apps stay on the Update page in the App Store app is a new feature. It is especially usefu to those that have auto app update turned on. You then have a record of the recently updated apps, the new features they have and when they were updated.
    Are you charging your iPad with the wall charger that came with it or by some other means. The wall charger is the best way to charge the iPad. If it is failing to fully charge a reset might help. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • My iPhone 4 battery will not fully charge after latest update.  What gives?

    I updated to the latest software and now my iPhone will not charge.

    After a full 8 hour charge it only shows about 40% charge.  This phone worked without incident before the last two firmware updates.  I use the same wall charger and Apple cord for my iPad and wife's phone (she has not updated her phone to iOs 6.0.1) and they all work great.  There must be something in the new update that kills battery life. By the way, I replaced my battery less than a month ago. 

  • Apple Mail not fully working after Mac OSX 10.5.7 update

    Since I have updated to Mac SOX 10.5.7 I don't get all of my email. I have 5 separate email accounts with my internet service provider (Cox) that are all with the same email service but when I go to check my email I only receive email messages from 4 of the 5 email accounts. I have sent test emails to each account but I don't receive the test email on one of the accounts and that is the one I use the most. This started to happen after I downloaded the update. Very strange..... Anyone out there having this same problem?????? These are POP email accounts.

    Now this is weird. When I went into Apple Mail preferences and unchecked the SSL box in ADVANCED then all of my emails came through fine and even my test messages to that email account. Perhaps that is the issue. Do I need to use SSL and what is it????

  • Table schema not being updated after a SQL 'alter'

    Hi all,
    I have a problem to do with altering table columns and queries relating to that table thereafter.
    I have a table which has been queried using an OracleDataAdapter.Fill(DataSet), if I add a column using say using an OracleCommand.ExecuteNonQuery() or sqlplus session (and doing a 'commit' after) the column does not show up on subsequant 'Fill' queries unless I reopen the DB connection.
    Just as an example, here is my test table which is defined as:
    create table steveTest
         id numeric,
         name varchar(15),
         address varchar(25)
    with a few rows of data in...
    If I query the table using ODP.NET (10 & 11)
    OracleDataAdapter oraDap = new OracleDataAdapter("select * from steveTest",oraCon);
    oraDap.Fill(ds);
    Everything is fine until I add/remove a column with say sqlplus or via an OracleCommand.ExecuteNonQuery()
    e.g     "alter table steveTest add address2 varchar2(30)"
    Subsequent Fill or data reader queries only show the unchanged table schema, without the newly added column. If I remove a column the symptoms are worse and I receive a "ORA-01007: variable not in select list"
    I can only think that ODP.NET is caching the schema for that table on that particular connection. Is there anyway to forcefully clear this out?
    I have tried OracleConnection.PurgeStatementCache(); but this doesn't seem to help me.
    My connection string is defined as:
    Data Source=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=10.0.0.27)(PORT=1521)))
    (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=xe)));
    User Id=system;
    Password=mypass;
    HA Events=true;
    Validate Connection=true;
    Pooling=false;
    Enlist=false;
    Statement Cache Purge=true;
    Statement Cache Size=0;
    The application I am writing is a middle tier application which handles various DB drivers and maintains several 'connection queues' which multiple lightweight client applications can use concurrently. As you can imagine, a possible scenario may arise where a table is queried, altered and then queried again which causes the above issue. The only way I can stop this from happening is if I close/open the DB connection but I don't want to do this after every alter statement.
    I have tried this on Oracle Express 10g and Oracle 10g servers with ODP.NET clients (10.2.0.100/2.111.6.0). Just a point I thought worth mentioning, this does not happen in sqlplus.
    Any help would be much appreciated.
    Regards,
    Steve

    maybe u can check by debuggin the incoming idoc in we19.
    1. check the data u are sending from the source system
    2. check for the field before and ater change in the target system.
    maybe the field is update with the same content. also check the status record of the idoc
    Message was edited by:
            Prabhu  S

  • App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

    Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive.  These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
    Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
    I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
    I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
    Any help is very much appreciated,
    Thank you!
    DT
    MacBook Pro 13-inch, Mid 2009
    Processor  2.26 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB

    I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
    DT

  • Trackpad not fully functioning after Yosemite upgrade

    I have a mid-2011 iMac 27".  I was running Lion and upgraded to Yosemite.  I have 12 gb of RAM and plenty of storage.
    Since the upgrade, the trackpad no longer fully functions.  It will two finger swipe up and down within a window (although even that has crashed in Firefox and the only way to get the swiping back is to close and reopen Firefox).
    No three finger swipes or pinching to get to Launchpad.  No four finger swipeups to get to Mission Control.  No side to side swiping either. 
    No pinching to zoom in or out.  Nothing...just two finger up/down swipes and single/double taps for left/right mouse functionality.
    Keyboard works just fine.  I can arrow key all over the place when the trackpad crashes, but that is a pain.
    I've tried everything I've read so far. 
    I've turned off  WiFi as I read in one of the threads that was a fix for someone else.
    I've removed the trackpad from Bluetooth, turned it off, shut down the Mac and after rebooting then reassociated the trackpad when the Bluetooth prompt comes up.  Nope, doesn't work either although others have said that works for them.
    I'm frustrated as I swipe all the time and would like to retrieve that functionality.  Help!

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Flash Player 10.1 is not fully active after over 50 uninstalls and reinstalls.

         About 2 weeks ago I started noticing this. I would load up Facebook games and it would take forever. Then, once it did finally load the images were gone and those strange java encoded images were in their place instead. My report log has no indication of crashes during this time, however in the last week I have had a getPlus+R stopped working, a GfxUI APPCRASH, and an HP Advisor APPCRASH. Also been getting many errors. The most recent when trying to reinstall Adobe DLM, I got "Firefox could not install at http://platform.adobe.com/NOS/getPlusPlus/1.6/gp.xpi download error 228".
         When I do get to a facebook game it says that I do not have the updated version of the flash player, so I go and uninstall it, restart my computer, reinstall it, restart my computer and still get it. I have done this over 50 times and counting. I keep doing this because every once in a while the flash player does not act up for a couple hours, usually when I install a new browser to sort of "trick" it, I guess. It catches on though...cause today's browser was Opera and it worked great for about 2 hours, earlier in the week I tried safari with some success for about 4 hours. I'm gonna run out of browser options and my time with this trick only seems to get less and less hours from each time I do it.  I have cleared my cache hundreds of times during this process as well. I really do not understand how to check or set the flash player settings though. I would think that they would have a safe default though, because I never installed any adobe products when I got the computer, so I assume they came preinstalled and set properly. Also when I bought this laptop a couple months ago, I got that stupid Norton thing which would tell me to activate it every time I logged on so I said hell with it and activated the trial version just to make it go away. I did this about a week and a half ago and it seems that this is when everything really started to fall apart. There are so many things I have tried that I cannot even begin to list them all. I have downloaded so many other Adobe trials to see if they'll fix the problem, but I don't really even know how to use them or what they are really for. I should mention that I am using Windows 7 and connecting via wifi. I can browse the internet with no problems and watch youtube videos with no problems as well. For the most part, just those facebook games are affected by this. I think it killed some of my drivers though, because I went and downloaded a bunch of intel drivers and one actually flashed "GfxUI" for a moment while it was installing, and that was one of the crashes I got. I really don't know where else to go from here. I have Internet explorer but rarely use it. Kind of hopeless here. I really don't expect any possible solutions to this since no one else seems to be having the same problems. Most people can just uninstall it and reinstall it for it to be fixed in most forums. Well, I guess I'll check back and see if anyone has an answer before I take my computer back under it's supposed warranty.

    Hi a, Glad you removed Norton. On Skype, go to Tools & Manage add ons. Find any add ons that pertain to
    Skype and Disable them. Once these problems have been solved then you can always enable any that have been disabled.
    Anytime you lose an Internet connection you will receive those kind of errors. Wireless connections are subject to a loss of signal. I would contact your Carrier and report them.
    Any site or game that tells you to update Flash Player, ignore. You did the right thing going to Youtube. If that works, then disregard anything to the contrary. That site is having a problem, not you. Take care not to disrupt your Flash Player Installation!!
    On Avast not being able to update would most likely be due to the loss of signal. That Avast updated 3 times is not unusual. That is just a sign of additional risks. I had Avast and during some periods that was done also. No problem.
    While you are still in the process of removing programs and troubleshooting, if there are any add ons/plug-ins/extensions that are causing an issue, I would disable them. Once you have your troubleshooting done, then see about them.
    On McAfee, didn't that Install with FP at one time? I think you removed that as I recall. You can refer to the instructions I gave you to remove it and make sure it is not there.
    Thanks,
    eidnolb

  • Media Encoder does not use updated After Effects files

    Hi,
    I am working on a project using the new After Effects CC and Media Encoder. In previous versions (CS6) if I updated a file in After Effects, saved it and brought it back into Media Encoder the new rendered file would be fine.
    Now it seems that I have to quit Media Encoder in order to get the refreshed composition from After Effects into the render queue, otherwise it just re-renders whatever the last version was.
    Any thoughts?

    Nothing to fix because nothing is broken. The programs wil ltake what they need and not beyond that or more to the point, what their internal infrastructure allows them to use. Many encoding tasks require strict linear processing as do many effects in AE, which severely limits the ability to use multiple cores/ processors no matter what. Furthermore things like linear file access in clip based formats would furtehr compound the issue. And finally, naturally it matters a lot what's going on in your projects. If your footage loads slowly, move it to a faster disk. if it's compressed, uncompress/ convert it. If you use slow effects, substitute them with faster commercial third-party plug-ins. if you render to clips, redner to image sequences. The list for potential optimization could go on and on, but suffice it to say that none of this involves just pushing a magic button or checking a specific option. you need to learn these things and tweak them based on experience.
    Mylenium

Maybe you are looking for