Stock not getting updated after confirmation of order

dear all
In our scenario x is final product.x1( semifinished),x2(spare) are dependent materials for final product. x1 has bom r1 and r2 (raw materials).I put all x1,x2,r1,r2 stock available in storage.
To get final product , only final assy of above materials by labour.PIR (md61) created for x and planning run.After planning run, planned order generated for x and converted in to production order and released.
My requirement is on confirmation of production order, backflushing of dependent materials as per bom should be done.
On confirmation of order in co15,saved.But, stock is not getting updated.what might be the reason? please give me some solution

Hi
1.Set the Back Flush Indicator in your Material Master for the components. ( You can do this in Work center and Production Order too )
2. You can also set the flag for the field " All Components" in Order Confirmation Parameters (OPK4).
3. If you want to post the Fert also at the time of confirmation use the Control Key which has " Auto GR"  enabled.
While confirming the Order press the Button "Goods Movement" to ensure that the components are present there for the movement.
Regards
Krishna
Regards
Krishna

Similar Messages

  • Wage group is not getting updated in confirmation.

    Hi
    When confirmation is done through idoc ( type Conf21) then wage group is not getting updated in confirmation table AFRU.
    When confirmation is done through co11n then it gets updated.
    How to get it updated when confirmation is done through idoc.

    Hi,
    In we02 Kindly check if the required field is correct mapped in the IDOC.
    Reg
    DSk

  • Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

    Hiiii,
    In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
    Best Regards,
    Sridhar . P

    Dear Heagal,
    I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
    1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
    2. Removed Credit groups for Delivery Type.
    3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
    I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
    Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
    If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and  Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
    Best Regards,
    Sridhar

  • Stock not getting update

    hi,
    i have done sub-contract process, in which after completion of MIGO (101 - 543 mvt), document had posted.
    however in MMBE there is no stock. 
    MC.9 - stock is available
    reg
    mrs

    hi
    If you are ordering material for stock than only stock will be updated after goods receipt.
    But if you are purchasing material with item category K, i.e. cost center, than u r ordering material directly for consumption. so it will not be updated in your stock. it will be shown as consumed by cost center K, as soon as you do goods receipt for the same.
    This is why , your stock is not getting updated with PO with cost center item category.
    you can also check in other way
    Goto OMJJ and give the reuiqred movement types and check the VALUR and QUANITY UPDATE should be checked
    Also you can check in OMS2 the VALUE and QUANITY update is checkd or not for MATERIAL TYPE
    Regards

  • Overhead is not getting updated in the production order

    Hi all,
    I am running actual overhead calculation with KGI2.
    But the overheads are not getting updated in the order.
    Order contains relevant overhead key also.
    What could be the possible causes?
    SmanS

    Arun/ Suleman,
    Thank you for your reply.
    I have maintained the % in the costing sheet against the 'Overhead rate' but I didn't get the secondary cost element.
    Request you to elaborate it further & explain me how to maintain the same.
    Also I will be thankful to you, if you could explain me the exact process of loading the overhead on the order i.e. how it loads the overhead form the cost center to order? What happens to the total cost which was lying on the cost center etc, in details.
    Mean while I had maintained the required values in costing sheet in KZS2.
    Maintained the % against material overhead rate as well as manufacturing overhead rate.
    Maintained the credit values for the overhead rate.
    Maintained the calculation base values also.
    Now while overhead calculation with KGI2, I am getting two errors as follows,
    1. S:K5:162 E02 20090831
    2. Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND for object
    I can not figure out the reason.
    SmanS
    Edited by: SAP PP Consultant on Aug 10, 2009 6:47 AM

  • After EHP6 upgrade in SAP ECC6.0 Stocke not get updated in MMBE after Partial UD

    Hello Experts,
    Recently we have upgraded our system to EHP6 on ECC 6.0 facing issue in MMBE. We have given Partial UD. after partial UD, some stock suppose to move in Blocked stock as per UD code customization. surprisingly stock not moved to Blocked stock. same is updating through Mb1b transaction.
    Thanks in Advance !

    Hi,
    Check what have you maintained in QM inventory posting in Configuration.
    Follow the path: QCC0> Quality Inspection> Inspection lot completion> Define inventory posting.
    Movement type 350 should be maintained against VMENGE04 in Q Stock.
    ntn

  • Open TRs not getting deleted after TECO production order

    Hi,
    We're having an issue.  We're using WMPP interface to supply the production line for the production orders.  The auto TRs are generated when the production orders are released. 
    After TECO the production orders, the open TRs are not getting deleted automatically.
    Could anyone know if these TRs get deleted automatically when we do the TECO production order?
    If yes, do we have any restriction or condition based on this, the TRs get deleted?
    Please explain.
    Thank you.
    with regards,
    Muthu.

    Hi Abhijit,
    Thank you for your reply.  It does not help me.
    The auto TR creation is happening now as required.  No issue on this.
    When you do the TECO, it also cancels the TRs.  I tested this also. 
    There're some scenario this open TRs cancellation is not happening.  I do not know when these open TRs are not cancelled.  If you know answer for this, please let me know.
    Thank you for your help and time.
    with regards,
    Muthu.

  • Activity price not getting updated at Production order

    Hi All,
    I have made activity dependent planning at cost centre and calculated the activity rate. The activity rate is showing correctly for the cost centre in KP26, but while confirming the production order (CO11N) the the activity price is not getting updated in production order. But material price is getting properly updated at production order.
    Plz help me in identifying the possible areas of mistakes.
    Regards,
    BKD

    Hi,
    Please check the Period for which you have created the ht activity price is same as the period in the conformation. In the workcenter in which you are confirming please check whether the activities are assigned to the work center.
    Bye,
    Ramesh

  • CCS Details are not getting updated to COPA in Sales Order Settlement(VA88)

    Dear Experts,
    Our scenario is MTO with valuated material.
    1. Production order is tagged to Sales Order.
    2. Production order is settled to Material and variance is getting posted to COPA.
    3. At the time of Delivery, COGS Debit (Cost Object- Sales Order), Credit - Inventory.
    4. At the time of Billing, Accounting Document is getting generated, COPA document is not getting generated.
    5. We  are not executing WIP. (as per Business process)
    6. Settlement is done thru transaction code VA88. COPA Document is getting generated.
    I am facing the following issues in the above MTO process.
    1. At time of sales order settlement thru VA88, In COPA, only COGS is getting as updated with one value field i.e. Material Cost.  Cost Component data (Material Depreciation, Labor etc..) is not getting updated to COPA.
    2. When I settle the Sales Order thru VA88, Billing Quantity is not getting updated to COPA though Quantity field mapping is done properly.
    Please help me how to resolve the above issues.
    Note: Same Cost Component Structure, we are using for Make to Stock scenario. Cost Component Data is getting updated Properly to COPA  (at the time of Billing)
    Regards,
    vgl
    Edited by: vglokam on Aug 31, 2010 10:52 AM
    Edited by: vglokam on Aug 31, 2010 10:54 AM

    Hi
    1. CCS (Cost Comp Split) wont be updated to COPA if you settle via sale order.. In sale order, COGS cost element is posted.. the same will get settled to COPA as one single value...
    In MTS, the CCS gets updated to COPA upon billing because of the "valuation" strategy customization... Billing posts to COPA in that case, COPA gets Sales Qty and it is valuated with CCS to give you the break up.. But, in your case, Billing is not posting to COPA, but to sales order.. hence, there is no qty flow into COPA upon billing.. thats why you dont get CCS for MTO
    2. The sales qty should be updated to COPA upon VA88.. For this, make the following settings in your PA transfer structure which is used during VA88
    1. Go to KEI1, Select your PA transfer structure...
    2. Add an assignment line in it... Check on "Qty Billed/Delivered" in the assignment line
    3. In the Tab "Value Field" below "source", assign Qty Field
    Now when you settle, it should update qty as well
    regards
    Ajay M

  • Purchase order history not getting updated for Delivery Costs invoice

    Hi
    Please let me know the reason why delivery costs invoice entry details are not updated in Purchase order history. As it is observed in another client.
    Thanks and advance.
    Regards
    Mohan

    Hi
    Following Stpes are executiong...
    1. PO
    2. MIRO for Custom duties
    3. MIGO (PO History getting updated after GR for both delivery costs and GR 101)
    Thanks in Advance.
    Regards
    Mohan

  • I have just ordered a photo book from iPhoto, do I not get an email confirmation?

    I have just ordered a photo book from iPhoto but after it generates nothing happens, has it sent? Do I not get an email confirmation?

    I solved the problem. Had nothing to do with Mac or iphoto. Problem must be my the internet connection to my provider.
    Upload at my office worked without any problem. One problem solved, now i am aware with a lot of discussions with my providers helpdesk  ;-)

  • Overdelivery tolerance- confirm quantity (allocation) not getting updated

    Hi All
        I have a strange problem......could this be a gap with the SAP program
    I am using over and under delivery tolerance (say 10%)  in the customer master - sales - shipping tab. Now i create a order with
    Order qty          1100
    confirmed qty   1100
    delivery qty      1200      (since we have maintained 10 % over delivery tolerance)
    Now i want to update the order to 1200 for two reasons
    1) to keep the order in sync with delivery
    2) to update the allocations (this is because we have Allocation activated and not ATP at schedule line level)
    So when i go into the order and update the line to 1200 the following happens
    Order qty             1200 
    confirmed qty      1100   (not updated)
    delivery qty         1200       
    So my confirm qty is not getting updated to 1200 and hence my allocation tables are not getting updated. The same is getting updated when we have ATP at schedule line level. Could this be a gap with SAP that i dosent update allocations in this scenario.
    The reason it dosent confirm is that it assumes that the delivery is completed and since we have tolerance maintained it assumed to be a good scenario.
    Please help.
    Vikas
    Edited by: Vikas BhumiReddy on Oct 28, 2009 5:27 PM

    I am also facing the same issue. Have you found out any solution regarding this.

  • When MSKA (Sales Order Stock) table get updated?

    Hi,
    May I know when MSKA(Sales Order Stock)  table get updated?
    Regards,
    thiyagu

    suppose a sales order has been created of 10 MTS and Production Person give me 5 MTS against the sales order by creating Planned Order& Production Order wrt Sales Order,then 5 MTS will be updated into Unrestricted - Use.
    If suppose Material is Return Delivery ,then after MIGO , it goes to Quality Inspection,then this Quantity will Updated in to Stock in Quality Inspection .
    Hope ,it will help you.
    Best Regards,
    Ankur

  • Moving Average Price does not get updated for Project Stock

    Hello Experts
    We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
    While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
    Problem:
    while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
    Question:
    How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
    Your help is kindly appreciated.

    I'm sorry for the confusion
    Case:
    The T-code is CJ20N Project Builder in PS module
    we are assigning material components to network activities under a certain WBS element in the project.
    there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
    The costing variant has a valuation variant which lists a series of strategies  to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
    The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
    The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
    This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
    This way the system will never get the MAP right.
    However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
    In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
    My Suggestion is:
    Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
    which is the MAP for both plant and project stock together, since that we are going to use both.
    Q: Is this correct !?

  • My ipod touch is not getting recognised after the update in my itunes library. the library is updated. and it shows the connect to itunes sign.

    my ipod touch is not getting recognised after the update in my itunes library. i have updated my library as well. but it shows the connect to itunes sign on my ipod.

    If it happened after updating iTunes on the computer see:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If after updating the iOS on your iPod:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for