UIX - how do I selectively make inputs required?

Ok, subject line probably not the best way to state this.
I have a UIX page with a VO-based read-only table and two messageDate fields. The user needs to select a row in the table and fill in the fields before hitting the submit button. The messageDate fields are both marked as "required" to force the user to fill them.
However, if the user selects a row in the table, the form submits when selecting/changine the current row in the table. It then stops ("Form validation failures...") because the dates haven't been filled in yet.
Is there a way to disable the "required" property on the date fields for when a table row is selected? (Or to select the row w/out submitting the form?)
Thanks.

Check the info here.. but big warning .. it often fails.. if you want to keep your old backups archive them off the TC to USB drive.. then erase and start fresh clean backup.
http://pondini.org/TM/Time_Capsule.html

Similar Messages

How do I select main input tray to print photo over ePrint and not photo tray?

when I send a picture from my Iphone the printer always wants to take paper from the photo tray ,despite that it's set up to take paper from the main tray.

Hey AndreBielser!
Unfortunately there isn't a way to select the paper tray through ePrint at this time. Photos will always try to print to the photo tray. The only way I have seen that you can get around this is by including the photo in the body of the message instead of as an attachment. I will definitely pass on the information that this is something you are looking for as a feature of ePrint though!
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to handle select multiple input in struts

I have a component <select name="weekdays" multiple="multiple">
What type of fiels weekdays shoul be in action form and how can I access selected options in action claa

that is not the way to go about it....you are actually not allowed to use the String[] field...that is how I approached it for the first time...below is a code snippit that solves the problem you are having.
<select name = "signature">
                  <option value=""></option>
                          <c:forEach var="items" items="${DOC_LIST}">
                          <c:if test="${items[0] == AMD_RESULTS.LETTERSIGN}">
                                  <option value='<c:out value="${items[0]}"/>' selected>
                                    <c:out value="${items[1]}"/>
                                    </option>
                          </c:if>
                                    <option value='<c:out value="${items[0]}"/>'>
                                    <c:out value="${items[1]}"/>
                                    </option>
                            </c:forEach>
             </select>amd_results is an array list passed from a servlet to the jsp page.
hope this helps..

How do I select range and require end date in it crystal report

I'm trying to select a range of dates in my records however it must include the end date from my parameters what is the syntax for that record selection and anything after the Start Date (open). If the Date range doesn't end in the specified End Date then I don't want to see it.

well I created two reports one with pulling all the end dates data then the other report with the stuff before that date and put the end date as a subreport in the other one so he can see what was done recently on the subreport and scroll through the other report while the subreport stays on the results bottom end - however he has to scroll through 100's of pages to find the data he wants so he doesn't like that. However it is a good mockup of the results he wants ...but he doesn't want to scroll through 100's of pages - my guess is he wants one report with end date only and any dates before hand.
Original
Part                         TransactionDate                         Qty                     Unit cost
GA101                    10/11/2013                                  5                         1.23
GA101                    5/25/2012                                   10                        2.23
GA101                    8/14/2011                                   15                        5.15
HE8924                  8/22/2014                                   14                        4.25
HE8924                  6/13/2012                                   2                          3.25
UY325                    8/22/2014                                   5                         6.32
UY325                    7/10/2010                                   2                         3.25
TE5689                  8/12/2014                                   1                          8.14
TE5689                  5/16/2013                                   2                          9.12
IO8978                    8/22/2014                                   6                         8.25
IO8978                    5/20/2013                                   8                         7.25
IO8978                    3/15/2012                                   4                         9.25
IO8978                    1/20/2009                                   5                         10.25
MY CODE RESULTS SHOULD SEE
START DATE 01/01/2011 END DATE 08/22/2014
Part                         TransactionDate                         Qty                     Unit cost
HE8924                  8/22/2014                                   14                        4.25
HE8924                  6/13/2012                                   2                          3.25
UY325
8/22/2014
    5
   6.32
IO8978                    8/22/2014                                   6                         8.25
IO8978                    5/20/2013                                   8                         7.25
IO8978                    3/15/2012                                   4                         9.25

How to create Variables(User Input Selections) in WEBI Report

Hi Team,
              My requirement is to create a WEBI Report on top of BEx query,I have created a Universe and WEBI Report on this Universe but my doubt is How to create Variables for the User to select.The Input selection should be
User Iputs(All are drop downs)
Distribution Channel :       ->drop down,user can select one
Division:                          -> drop down,user can select one
Department:
Season:
Collection:
Date Format              Valid From:                                 Fiscal Week:
When the user gives the above selections the output should be displayed as
Material No   Description     Markdown Week     Reason code1(under this)        Reason code2(under this)   like that for all the
                                                                            valid from         Amount              Valid from          Amount            Reason code.
I have designed the basic layout of the Report but wanted to know how to design like this,Please help me out in this Format.
Thanks & Regards,
Somu

Hi, depending on the way you set this up (it is not entirely clear if you are talking bex variables or report drop down filters), use the following;
For BEX variables, the choice will be in the
UserResponse("prompt message")
this you can display in the message format you want.
For drop down filters the choice will be in the DrillFilters(), this one will show all selections in one string.
However, if you want to format this to a certain message, you need to use the Formula
DrillFilters([object from drill bar])
This will give you the result of just that one selection. If the user did not select (yet), the value will be "".
Hope this helps,
Marianne

How i can show the selection screen input field in the top of page in alv

hi ,
          how i can show the selection screen input field in the top of page in alv grid output.
tell me the process

Hi,
excample from my program:
FORM topof_page.
DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
        l_info        LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
    if not &1 is initial.
      clear l_it_header.
      l_it_header-typ   = 'S'.
      l_key = '&1'.
      translate l_key to upper case.
      read table l_it_textpool with key key = l_key.
      if sy-subrc = 0.
        shift l_it_textpool-entry left deleting leading space.
        l_it_header-key = l_it_textpool-entry .
      endif.
      loop at &1.
        case &1-option.
          when 'EQ'
            or 'BT'
            or 'CP'.
            write &1-low to l_it_header-info.
          when others.
            write &1-low to l_it_header-info.
            concatenate &1-option
                        l_it_header-info
                   into l_it_header-info
                   separated by space.
        endcase.
        if not &1-high is initial.
          write &1-high to l_info left-justified.
          concatenate l_it_header-info
                      l_info
                 into l_it_header-info
                 separated by space.
        endif.
        if &1-sign = 'E'.
          concatenate ']'
                      l_it_header-info
                 into l_it_header-info.
        endif.
        append l_it_header.
        clear: l_it_header-key,
               l_it_header-info.
      endloop.
    endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
             s_trmext,
             s_trmint,
             s_fkdat,
             s_delno,
             s_vbeln,
             s_deact,
             s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole

How to use dynamic selection screen inputs in main program

hi all,
its a report where in it calls one dynamic selection screen( user need to enter the parameters here) after that i need to use those inputs for some check, can any buddy help how to use/ get that input parameters into main program.
regards,
vara..

Hi,
i think u have created that dynamic selection screen in seperate program and calling to ur main program.instead of that u just create that synamic selection screen program as include program and include it in ur main program.
or u need to use set/get parameter id concept.
rgds,
bharat.

How to make fields required in an updateble multi line form?

How to make fields required in an updateble multi line form?

You need to create a validation item that is triggered when the user clicks the submit button.
Set the validation type to "Function Returning Error Text".
Then add your validation into the "Validation Expression 1" field. Something like:
BEGIN
FOR I IN 1.. HTMLDB_APPLICATION.G_F02.COUNT LOOP
IF HTMLDB_APPLICATION.G_F02(I) IS NULL THEN
RETURN 'Please enter in a value for xxxxx on line ' || TO_CHAR(I,'0');
END IF;
END LOOP;
RETURN NULL;
END;
As long as the function returns a string, an error is generated - as there is no single field where this error can be displayed, it will need to be displayed "On Error Page".
If the return value is NULL, then the fields are valid and the submit process can continue.
Andy

How to make taxonomywebtaggingcontrol required

Hi,
I have created custom aspx and I have added taxonomywebtaggingcontrols.I want to make those controls required.
Can any body let me know how to make taxonomywebtaggingcontrols required?
I tried the following link but no luck.
http://sharepoint.stackexchange.com/questions/28602/is-it-possible-to-have-a-required-field-validator-for-taxonomy-webtagging-contro
Any help would be appreciated.
Thank you,
AA.

http://sharepoint.stackexchange.com/questions/78561/how-to-make-taxonomy-picker-required-when-used-in-visual-web-part
Taxonomy:TaxonomyWebTaggingControl runat="server" ID="taxProjectOwnerDepartment" Visible="true" IsMulti="false" IsDisplayPickerButton="true">
</Taxonomy:TaxonomyWebTaggingControl>
<asp:CustomValidator ID="rfvProjectOwnerDepartment" runat="server" OnServerValidate="validator_ServerValidate" />
http://sharepoint.stackexchange.com/questions/17019/taxonomywebtaggingcontrol-the-data-entered-was-not-valid-on-postback
Or you can plan to use Javascript to make mandatory that column.

How do I selectively erase old data from old computers on my Time Capsule to make room for my new computer data?

My new computer did one complete backup on the Time Capsule now I get the message that there is insufficient room to complete further backups.
(128 GB available, my backup size is 170GB but the time capsule is 998GB)
I suspect that information from old computers is there. How do I selectively remove that information or do I have to erase the whole Time Capsule and start over with my new computer and backup again?

Check the info here.. but big warning .. it often fails.. if you want to keep your old backups archive them off the TC to USB drive.. then erase and start fresh clean backup.
http://pondini.org/TM/Time_Capsule.html

[UIX] How To: Return multiple values from a LOV

Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="${bindings.DepartmentId.path}"
    destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="DepartmentId"
    destination="departmentsLov.uix"
    partialRenderMode="multiple"
    partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
    id=DepartmentName
    model="${bindings.DepartmentName}"
    columns="10"
    disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
    <compound>
        <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
        <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
    </compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
    <compound>
        <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
        <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
    </compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.

Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido

Sharepoint 2010 - Cannot make field Required in Add New Item form.

I made a fleld Required by making the proper selection in List Settings > Editing the column. It now shows as required when I edit an existing record in the list, but is not required when adding a new item. Why does the setting not apply
to the Add New Item form? How can I make it apply/required?
btw, there are no content types associated with the list.

Hi ,
According to your description, my understanding is that you cannot make field required in the list new form.
For my test, I created a custom list , added a non-required field and added some records. Then I made the field required. But it worked fine as expected both in existing records and in Add New Item
form.
Do you have some customization in your list new form?
You can go to your list -> Customize Form under list tab, then the new form will be opened in the InfoPath. In the InfoPath, right click the field and select Text Box Properties, make sure “Cannot
be blank” has been checked.
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to create an user input variable for customer exit variable? - BW3.5

Hi Guru,
I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable:
1. Month: Current reporting month
2. Fiscal Year to Date
3. Project Year to Date
Here I need 2 variable to do these, 1 customer exit and 1 user input variable. I have created a variable customer exit to calculate all these requirement. But can any1 tell on how to create the user input variable for my customer exit? I need a user input variable with drop down list like below.
01-Current month
02- Fiscal Year to Date
03-Project Year to Date
I have create a new master data for this variable, but it's not working. What I need now is a standalone master data which do not need to link to any exiting records. Can any1 tell me how to create this?

Just go to the definition of the variable for which you have created a customer exit. There you will find a check box for "Ready for Input". Just tick that checkbox and the variable will be available as a selection variable in the reports selection screen.
Regards,
Yogesh

To display the user login details in selection-screen( input screen )

HI Experts,
I have a requirement.
Assume there is a report on travel details. Report access has been given to all in the organization based on authorization level.
Before excecuting the report, in the selection-screen(input screen) itself I need to display the login user details.
suppose user A belongs to ITS-business unit and user B-belongs to RDS-business unit and Industry group-Multi markets.
so when User B logs into production system and try to access the report, in the selection screen, i need to display like
user-id-- XXXX          Business Unit---RDS             and IG -
Multi Markets
how to achieve this? User details will vary based on login.
Regards,
Praveen

check this
REPORT Z_demo.
*& Function Modules: HR_GET_EMPLOYEE_DATA
*&                    HR_IMAGE_EXISTS
*&                    SCMS_DOC_URL_READ
*&                    HR_IMAGE_RESET
*& Class & Methods : CL_GUI_DOCKING_CONTAINER
*&                    CL_GUI_PICTURE->SET_POSITION
*&                    CL_GUI_PICTURE->SET_DISPLAY_MODE
*&                    CL_GUI_PICTURE->DISPLAY_MODE_FIT
*&                    CL_GUI_PICTURE->LOAD_PICTURE_FROM_URL_ASYNC
*REPORT ZEMPLOYEE.
TABLES: PA0001, PERSON.
*----------------------Declaration for Image------------------------*
DATA: DOCKING_CONT TYPE REF TO CL_GUI_DOCKING_CONTAINER, " Custom Container
      PICTURE TYPE REF TO CL_GUI_PICTURE.
*--------------------Declaration of Internal table------------------*
DATA: ITAB_EMPDATA LIKE TABLE OF PERSON.
DATA: ITAB_DATA LIKE TABLE OF PERSON WITH HEADER LINE.
DATA: P_CONNECT_INFO LIKE TABLE OF TOAV0 WITH HEADER LINE.
DATA: P_DOCUMENT_TYPE LIKE TOAV0-RESERVE.
DATA: URL(255) TYPE C.
DATA: HANDLE TYPE I.
DATA: PPERNR TYPE PA0001-PERNR.
*----------------------Start of Selection Screen----------------------*
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-099.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN COMMENT 40(25) TEXT-010 .
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-002 FOR FIELD PERNR.
PARAMETERS PERNR TYPE PA0001-PERNR.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-008 FOR FIELD ENAME.
PARAMETERS ENAME TYPE PA0001-ENAME.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-003 FOR FIELD PERSG.
PARAMETERS PERSG TYPE PA0001-PERSG.
SELECTION-SCREEN COMMENT 45(15) TEXT-009 FOR FIELD WERKS.
PARAMETERS WERKS TYPE PA0001-WERKS.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-004 FOR FIELD PERSK.
PARAMETERS PERSK TYPE PA0001-PERSK.
SELECTION-SCREEN COMMENT 45(15) TEXT-005 FOR FIELD KOSTL.
PARAMETERS KOSTL TYPE PA0001-KOSTL.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-006 FOR FIELD ORGEH.
PARAMETERS ORGEH TYPE PA0001-ORGEH.
PARAMETERS ORGEHTXT TYPE PERSON-ORGEH_TXT .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-007 FOR FIELD PLANS.
PARAMETERS PLANS TYPE PA0001-PLANS.
PARAMETERS PLANSTXT TYPE PERSON-PLANS_TXT .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN END OF BLOCK B1.
*AT SELECTION-SCREEN OUTPUT.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN.
    IF SCREEN-NAME = 'ENAME'
    OR SCREEN-NAME = 'PERSG'
    OR SCREEN-NAME = 'PERSK'
    OR SCREEN-NAME = 'KOSTL'
    OR SCREEN-NAME = 'WERKS'
    OR SCREEN-NAME = 'ORGEH'
    OR SCREEN-NAME = 'PLANS'
    OR SCREEN-NAME = 'ORGEHTXT'
    OR SCREEN-NAME = 'PLANSTXT'.
      SCREEN-INPUT = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'ORGEHTXT'
    OR SCREEN-NAME = 'PLANSTXT'.
      SCREEN-OUTPUT = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
PERFORM GET_PIC.
*AT SELECTION-SCREEN .
AT SELECTION-SCREEN .
PPERNR = PERNR.
CALL FUNCTION 'HR_GET_EMPLOYEE_DATA'
    EXPORTING
      PERSON_ID             = PPERNR
      SELECTION_BEGIN       = SY-DATUM
      SELECTION_END         = SY-DATUM
    IMPORTING
      PERSONAL_DATA         = ITAB_DATA
    EXCEPTIONS
      PERSON_NOT_FOUND      = 1
      NO_ACTIVE_INTEGRATION = 2
      OTHERS                = 3.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENAME = ITAB_DATA-ENAME.
PERSG = ITAB_DATA-PERSG.
PERSK = ITAB_DATA-PERSK.
ORGEH = ITAB_DATA-ORGEH.
PLANS = ITAB_DATA-PLANS.
KOSTL = ITAB_DATA-KOSTL.
WERKS = ITAB_DATA-WERKS.
ORGEHTXT = ITAB_DATA-ORGEH_TXT.
PLANSTXT = ITAB_DATA-PLANS_TXT.
*Function Module To check Existance of Image
CALL FUNCTION 'HR_IMAGE_EXISTS'
    EXPORTING
      P_PERNR        = PPERNR
    IMPORTING
      P_CONNECT_INFO = P_CONNECT_INFO
    EXCEPTIONS
      OTHERS         = 2.
     P_DOCUMENT_TYPE = P_CONNECT_INFO-RESERVE.
*Function Module To Get the URL of Image
CALL FUNCTION 'SCMS_DOC_URL_READ'
    EXPORTING
      STOR_CAT    = SPACE
      CREP_ID     = P_CONNECT_INFO-ARCHIV_ID
      DOC_ID      = P_CONNECT_INFO-ARC_DOC_ID
      COMP_ID     = 'DATA'
      DP_URL_ONLY = 'X'
    IMPORTING
      URL         = URL
    EXCEPTIONS
      OTHERS      = 10.
IF SY-SUBRC <> 0.
ENDIF.
*Method To load Image from URL
CALL METHOD PICTURE->LOAD_PICTURE_FROM_URL_ASYNC
    EXPORTING
      URL = URL.
IF SY-SUBRC NE 0.
ENDIF.
IF PPERNR NE PERNR.
*Function Module To Reset Image
    CALL FUNCTION 'HR_IMAGE_RESET'
      EXPORTING
        HANDLE         = HANDLE
      EXCEPTIONS
        INVALID_HANDLE = 1
        OTHERS         = 2.
    IF SY-SUBRC <> 0.
    ENDIF.
ENDIF.
*& Form Get_Pic
FORM GET_PIC.
DATA: REPID LIKE SY-REPID.
REPID = SY-REPID.
IF PICTURE IS INITIAL.
*Object To Create the Custom Container
    CREATE OBJECT PICTURE
      EXPORTING
        PARENT = DOCKING_CONT.
    CHECK SY-SUBRC = 0.
*Method To Set Position of Image
    CALL METHOD PICTURE->SET_POSITION
      EXPORTING
        HEIGHT = 47
        LEFT   = 610
        TOP    = 25
        WIDTH = 70.
*Method To Set Display Mode Fit to Container
    CALL METHOD PICTURE->SET_DISPLAY_MODE
      EXPORTING
        DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
ELSE.
*Function Module To Reset Image
    CALL FUNCTION 'HR_IMAGE_RESET'
      EXPORTING
        HANDLE         = HANDLE
      EXCEPTIONS
        INVALID_HANDLE = 1
        OTHERS         = 2.
    IF SY-SUBRC <> 0.
    ENDIF.
ENDIF.
ENDFORM. "Get_pic

How to run the Batch input session(SM35) in background thru Report program

Hi Experts,
I am working in one modification report requirement ,the report is Mass upload will update and run the file via batch input session. The client requirement is to implement the report execution in background mode , the batch input session will process automatically (ie. the job runs the batch input session in background and process the session ends).
Currently, the report calls SM35 to write a batch input session and the user manually selects the session and record the transactions.
Once the Transaction enters and the selection-screen inputs are given, then the transaction executed in background mode and all the above batch input process to be implemented.
Please advise and guide me, how to proceed.
I need your guidance to proceed via Call transaction using bdcdata statement, if it can be achieved the requirement.
Thanks & Regards
San.

Hi Arabind Prasad,
Thanks for your inputs.
I know the process of the report Execution in background and job steps.
I want the inputs for how to upload thru Batch input session in background job and the session should also processed automatically
Currently the report logic declared like call transaction 'SM35' and skip first screen.Once the report (tcode) executed (not in background) It writes one session in SM35. The user should select the session and process the transaction manually.
The new requirement is, if the report (tcode) executes in background mode...what and how the batch input session should be declared and how it process automatically (like you said mode 'N').
Hope I am clear in my query.
Please advise.
Regards
San.
Edited by: San Learner on Mar 1, 2011 7:16 PM

UIX - how do I selectively make inputs required?

Similar Messages

Maybe you are looking for