UIX: How to display more items in 1 column on the same row

Hi
I have a uix table with a couple of columns.
Now I want to display more elements in 1 column, but on the same row
E.g.
article | quantity <> | price
The quantity column has also to buttons to increase/decrease the quantity. Something like:
<column>
<columnFormat displayGrid="true" cellNoWrapFormat="true" columnDataFormat="numberFormat"/>
<columnHeader>
<sortableHeader text="Quantity" required="yes"/>
</columnHeader>
<contents>
<messageTextInput id="${ui:concat('PurchaseInvoiceLinesView3:Quantity:',uix.current.tableIndex)}" model="${ui:cond(uix.current.isNewRow,null,uix.current.PurchaseInvoiceLinesQuantity)}" text="${uix.current.PurchaseInvoiceLinesQuantity}" name="Quantity" promptAndAccessKey="Quantity" rows="1" maximumLength="6" columns="8">
<onSubmitValidater>
<decimal/>
</onSubmitValidater>
</messageTextInput>
<button text="&lt;" onClick="..."/>
<button text="&gt;" onClick="..."/>
</contents>
</column>
But both buttons appear on a new line. Resulting in:
[   1]
<
>
The useSeperateRows attribute is by default false, so that should be ok. Any ideas to get the buttons on the same row?
Regards.

Hi,
     If all of your line items are getting displayed in different pages, to my knowledge, there may be two possibilities.
1) May be the size of the main window can accomodate only one line item. If one item data fills up the window, then there wont' be any space for the next line item data to be accomodated in the same window in the same page, so, the system triggers the next page. Like-wise for each item data. If this is the case, increase the height of the main window to display items in same page.
2) Check the driver program. Find the Write_form block, which is written inside an item loop. May be there is a Form-control Function module( Control_form with parameter 'NEW-PAGE' ) being called after the write_fom block, within the loop. If this is the case, remove the control_form FM section to make the data display in same page.
Best Regards,
Kumaar.S

Similar Messages

  • How to display current postion and previous position in the same row?

    I need to produce a promotions/transfer report that gives the employee's current position as well as his/her previous position in the same row.
    for example:
    Employee current position current organization current company previous postion previous organization previous company
    Jane Smith Executive PA ZYX ltd Harmony personal assistant ABC ltd Yahoo
    I am using the per_all_people_f, per_all_assignments_f, per_periods_of_service, hr.all_organization_units, per_all_positions tables
    Somehow i cannot manage to display the previous position. I can only get so far to display the current postions
    Any ideas? here is the full code
    --this query gives current info
    select ppf.employee_number, ppf.full_name
    , (DECODE (ppf.sex, 'M', 'Male', 'F', 'Female') ) gender
    , (DECODE (ppf.per_information4
    ,'01', 'Indian'
    ,'02', 'African'
    ,'03', 'Coloured'
    ,'04', 'White') ) race
    , ppf.ORIGINAL_DATE_OF_HIRE
    , paf.EFFECTIVE_START_DATE current_postion_start_date
    , RTRIM (SUBSTR (hpt.NAME, 1, INSTR (hpt.NAME, ';') ),';')Current_Position
    , ho.name Current_Organization
    , xx_return_structures.xx_return_company_name
    (paf.person_id,
    paf.effective_start_date
    ) current_company
    from per_all_assignments_f paf,
    hr_all_positions_f_tl hpt,
    hr_all_organization_units_tl ho,
    per_all_people_f ppf
    --where paf.person_id = 16170
    and paf.POSITION_ID=hpt.POSITION_ID
    and paf.ASSIGNMENT_NUMBER is not null
    and ho.organization_id = paf.organization_id
    and ppf.person_id=paf.person_id
    and paf.EFFECTIVE_START_DATE between ppf.EFFECTIVE_START_DATE and ppf.EFFECTIVE_END_DATE
    order by paf.EFFECTIVE_START_DATE
    --this query gives previous position, organization and company
    select ass.EFFECTIVE_START_DATE
    , RTRIM (SUBSTR (hpt.NAME, 1, INSTR (hpt.NAME, ';') ),';')Previous_Position
    , ho.NAME previous_organization
    , xx_return_structures.xx_return_company_name
    (paf.person_id,
    paf.effective_start_date
    ) previous_company
    from per_all_assignments_f paf, hr_all_positions_f_tl hpt, hr_all_organization_units_tl ho
    where paf.person_id = 16170
    and paf.EFFECTIVE_START_DATE not in (select max(paf.EFFECTIVE_START_DATE)
    f rom per_all_assignments_f paf
    where ass.person_id = 16170)
    and paf.PRIMARY_FLAG ='Y'
    and paf.POSITION_ID=hpt.POSITION_ID
    and paf.ORGANIZATION_ID=ho.ORGANIZATION_ID

    Ok so here is my problem. The current position display 3 times. The rest is correct. it only display once. Any ideas on how to get rid of the 2 extra rows that is being displayed with the current position?? I only need the current position to display once with the previous position info.
    select distinct pvs.person_id,
    peo.EMPLOYEE_NUMBER empno,
    peo.FULL_NAME,
    (DECODE (peo.sex, 'M', 'Male', 'F', 'Female') ) gender,
    (DECODE (peo.per_information4
    ,'01', 'Indian'
    ,'02', 'African'
    ,'03', 'Coloured'
    ,'04', 'White') ) race,
    peo.ORIGINAL_DATE_OF_HIRE,
    pvs.EFFECTIVE_START_DATE curr_start_date,
    RTRIM (SUBSTR (pvs.job, 1, INSTR (pvs.job, ';') ) ,';') current_position,
    pvs.ORGANIZATION current_organization,
    substr(pvs.PAYROLL,5)current_company,
    a1.previous_position,
    a1.previous_organisation,
    a1.previous_company
    from per_periods_of_work_v pv,
    per_assignments_v2 pvs,
    per_all_people_f peo,(select distinct RTRIM (SUBSTR (pvs.job, 1, INSTR (pvs.job, ';') ) ,';') previous_position,
    pvs.ORGANIZATION previous_organisation,
    substr(pvs.PAYROLL,5)previous_company,
    pvs.job_id job_id,
    pvs.organization_id,
    pvs.position_id,
    pvs.location_id,
    pvs.PERSON_ID,
    pvs.PEOPLE_GROUP_ID,
    pvs.EFFECTIVE_END_DATE,
    pvs.EFFECTIVE_START_DATE
    from per_assignments_v2 pvs
    where sysdate > pvs.EFFECTIVE_END_DATE
    and pvs.person_id=4723
    )a1
    where peo.person_id = pvs.person_id
    and pvs.person_id = pv.person_id
    and a1.person_id = pvs.person_id
    and pvs.EFFECTIVE_START_DATE between peo.EFFECTIVE_START_DATE and peo.EFFECTIVE_END_DATE
    and pvs.PEOPLE_GROUP_ID <> a1.people_group_id
    and pvs.JOB_ID <> a1.job_id
    and pvs.ORGANIZATION_ID <> a1.organization_id
    and pvs.position_id <> a1.position_id                     activating this elimnates 1-Feb-2008 info
    and pvs.effective_start_date -1 = a1.effective_end_date     activating this eliminates 1-feb-2008, 1-jul-2006, 1-april-1996 info
    and pv.person_id = 4723
    order by pvs.effective_start_date desc

  • How can I sum every other column in the same row?

    I have, for each employee, two columns: Planned and Worked.
    I would like to sum the values in each Planned column. There are 25 employees, each with their own Planned and Worked columns, on the same row.
    How can I do a SUM of every other column, starting with Planned?
    Thank you.

    Thank you, Yellowbox!
    The exact formula didn't work; however, it gave me a precise path to follow and come up with this: =SUMIF(E2:BB2,"=Planned",E3:BB3)
    Week
    Ending Date
    Planned Subtotal
    Worked Subtotal
    Employee1
    Employee2
    Employee3
    Planned
    Worked
    Planned
    Worked
    Planned
    Worked
    1
    01/04/2014
    120
    40
    38
    40
    44
    40
    50
    2
    01/11/2014
    If not for your starting point, I'd have wasted many more hours on this.
    Thanks again!
    BB

  • How to call more then one Function modules at the same time

    HI ,
    How to call more then one FM at the same time .
    Modertor Message: Interview-type Questions are not allowed.
    Edited by: kishan P on Jan 2, 2012 2:22 PM

    They are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
    Thanks

  • When i connect my mac book pro to an external display using a VGA cable and adaptor, the external display splits into several different columns of the same screen overlapping one another. Does anybody have any ideas as to why this happens?

    I have used different VGA to mini port adaptors, different VGA cables and connected them to different external monitors and prjectors but the same thing happens. I am starting to think there may be a problem with the macbook itself however, when i have used a HDMI lead and adaptor to external monitors the external display is fine.

    Hi there LDIMERY,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    -Griff W. 

  • How to display content items in two columns?

    I have a simple content area set up, that I am adding items in
    (items that happen to be uploaded documentation files). I have a
    page created that displays the Content Area, with my own
    headers/banners etc.
    I want to display the item(s) under each folder in the content
    are, in two columns, but I can't figure out how?
    Thanks.

    Dave,
    Edit the Folder Style. Select the Folder Layout tab. Select
    the Region Properties you want to modify (e.g. Regular Items).
    Near the bottom of the page you can specify the number of
    columns.
    Regards,
    Jerry

  • How to implement more than one physical models from the same model

    Hello,
    We have designed a relational model for our application and now, we would like to implement it for our 4 environments: Development, Test, User-Test and Real. Each one has the same logical schema but, different physical clauses (i.e.: in development environment we will not use partitioning clauses).
    Is this possible?
    Thank you,
    Bernat Fabregat

    Hello Bernat,
    yes it's possible:
    1) open your design and go to Tools>"RDBMS site administration"
    2) add your sites there (Current design) - Development, Test, User-Test and Real; press ok when finish
    3) go to "Physical models" node in browser and use "new" from pop-up menu - your sites will appear in list
    4) after you set physical objects in one model (need to save it as well)l, you can clone those objects in other models - you can clone from lower or the same database version
    You can consider usage of "name substitution" functionality during DDL generation if objects should have different name (prefix) in different environment - in this there will be no need to change the name of objects in models.
    Philip

  • How to active more than one front panel in the same application ?

    Hello,
    I want to active several front panels in the same application. I am a recent labview's user and it's difficult to solve this question.
    Thanks for your help.
    Regards

    But, each VI, including each subVI has a front panel. If you want several front panels, that implies using several VIs. The top level VI will call the appropriate subVI. Each subVI that you need as a UI can be set to 'Show front panel when called' and 'close afterwards if originally closed'. These settings can be accessed through popping up on the VI's icon and selecting VI Properties..., then selecting Window Appearance, then selecting the customize button or the dialog radio button.
    Hope that this helps,
    Bob
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • How to select a value of a max value of another column in the same row?

    pversion pdate pcount
    1     11/6/2011     1
    0     11/6/2011     25
    1     11/6/2011     24
    How to select pversion for a maximum pcount, in this case max count is 25 and version will be 0?

    Like this?
    -- Data:
    with yourtable as
    select 1 pversion , 1 pcount from dual union all
    select 0 , 25 from dual union all
    select 1 , 24 from dual
    -- Query:
    select max(pversion ) keep (dense_rank last order by pcount) m_pversion
    from yourtable;(When you want to use the query with your real data, you will have to change 'yourtable' to your actual tablename)

  • Is it possible to display list alv and grid alv in the same screen

    Hi
    There are methods to display more than 1 alv grid in the same screen by using block append grid . In the same manner its available for more than 1 list alv report display by REUSE_ALV_BLOCK_LIST_APPEND.
    My question is I want to display 1 alv list and 1 alv grid report in the same output screen .
    Please let me know how to do it ?  I will definetly appreciate the answers.
    Thanks!!

    Hi Anindita,
                                      Previously i ad told v cant display two lists together in same screen. But u can use Block ALV for this. Use FM "REUSE_ALV_BLOCK_LIST_APPEND.
    In OO u can use Cl_GUI_EAST_SPLITTER_CONTAINER for displayin more than two lists in same screen.
    If useful giv points
    Regards
    Vanitha P

  • BEx - Display current year and previous year by day on the same row

    Hello experts, need some help/suggestions on how I can accomplish the following please. 
    We have a requirement to show MTD revenue by day for the current year and previous year.  The desired result will have the following columns
    Calendar Day   |     Current MTD Revenue     |     Prev MTD Revenue
    11/01/2009       |      15,131,005                    |        15,138,668
    11/02/2009         |    15,055,345    |                        15,523,762
    However, the result is showing up as follows:
    Calendar Day   |     Current MTD Revenue     |     Prev MTD Revenue
    11/01/2008       | |                                                   15,138,668
    11/02/2008       | |                                                   15,523,762
    11/01/2009       |      15,131,005 |
    11/02/2009       |      15,055,345 |
    The number of rows for Calendar Day varies depending on the date the user selects.  We only want to display the days for the current year with the Previous Year Column on the same row. 
    Can someone please let me know how I can get the results to display on one line for each day? 
    Thanks,
    David

    I have the same issue on my end, and am interested in responses. I searched the forum and found this suggestion in another post; not sure if this solution will help, but it looks like it might. This was a response from poster RadhaN:
    RadhaN  
    Posts: 390
    Registered: 8/27/09
    Forum Points: 876 
       Re: a simple query to show sales versus last year on daily basis/   
    Posted: Sep 21, 2009 9:53 AM    in response to: Shlomi Weiss           Reply 
    HI Shlomi
    Create a virtual characteristic in your infoprovider that can calculate the day from calendar Day. In ZXRSRZZZ while adding code for this virtual characteristic use the function module DATE_COMPUTE_DAY to compute the day for every calendar day.
    For calculating Sales Current year, create a restricted ky figure with Sales as the key figure. Add 0CalDay to this RKF and create a variable for this infoobject(Eg: ZCURYEAR) that will receive input from the user for the range of dates eg: 08/16/2009 - 08/22/2009.
    For Sales Prior year, create another restricted key figure with Sales. Add 0CalDay to this RKF and add a customer exit variable. In the Customer exit code use the ZCURYEAR variable and offset it to prior year in both the upper and lower limits. This should work.
    I hope this helps.
    Thanks.

  • How to insert more items for each tab in WAD  7.0

    Hello to everyone,
    My problem is confined to the WAD 7.0
    I would like to insert 4 different queries into a new Web Template.
    Two of them have to stay in one page and the others in one page each; therefore, the result would be a Web Template with three tabs.
    Unfortunately the system creates automatically four different tabs with one query each.
    Anybody knows how to insert more items in one page/tab?
    Thank you very much
    Savino Pompa

    Hi Savino
    In the WAD bring up the properites of the tabstrip_container web item, under the Internal Display group in the Tab Panel List, create 3 tabs, then drag 3 contatiner_layout web items into the tab web item.
    In each conatiner item drag the analysis web item, 2 in the first container, then 1 each for the others, then point each analysis web item at a dataprovider(query).
    Setup the contatiners so that the analysis items displays, to do this in the container properties create a row then on the following screen a column and then set the Subordinate web item to the analysis item, these web items control layout and are useful for dealing with multiple web items, for the first tab with 2 queries you will need to play with the layout, either 1 row 2 column or 2 row 1 column.
    For each tab you created add the corresponding contatiner as the Subordinate Web Item in the Tab Panel parameters for each tab.
    Hope this helps
    Josh

  • How to display more than one column with for each

    Hi guys,
    how to display more than one column with for each like below?
    for each
    Item1
    Item2
    Item3
    Item4
    Item5
    Item6
    Item7
    Item8
    Item9
    Item10
    End for each
    for each          
    Item1     Item2     Item3
    Item4     Item5     Item6
    Item7     Item8     Item9
    Item10          
    End for each

    Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
    Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
    Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
    Thanks,
    Bipuser

  • How to display RTE item in a HTML region

    I have a process that is populating a hidden item with a RTE item from another page. I need to display this in its formatted state. I am using an HTML region to display this item but the page shows HTML tags instead of rendering them. I have tried both options under html region (escape special characters and plain HTML text).
    Can someone please help me to display this formatted RTE item on a page? Btw...I am using APEX 4.0.
    Thanks.
    Ashwen
    Edited by: Ashwen on Jul 26, 2010 2:23 PM

    user12601765 wrote:
    did you figure out how to display RTE item in a HTML region? Can you share with me how you did it?No he can't. He's not been active on this forum for over a year, and is totally unaware of your post as watches on threads only persist for a few weeks. Please stop posting follow-ups to ancient threads. Many of the participants in such threads will no longer be active on the forum (check the "recent messages" in their profiles).
    Posting follow-ups to ancient threads/departed users is NOT an effective way of getting help:
    <li>Other users may ignore the thread as it appears to be closed
    <li>Your assumption that the questions are related may be incorrect, leading to confusion about the nature of the problem and potential solutions
    <li>Watches on the thread may have expired, so the original participants may be unaware of the new post, or they may no longer be active on the forum
    <li>You have no ability to mark posts as helpful or correct
    Post your question as a new thread, including at least the following information:
    <li>APEX version
    <li>DB version and edition
    <li>Web server architecture (EPG, OHS or APEX listener)
    <li>Browser(s) used
    <li>Links to related posts and threads using the methods in the FAQ.
    Please read the FAQ and forum sticky threads for more information on using this forum effectively.
    From the information in the Allow users to use Rich Text Editor to build their own HTML/Apex Page you resurrected:
    >
    I am a business user developing apps, so my technical skills are limited.
    >
    you should be considering Websheets. (See this tutorial as well.)
    Also, please update your forum profile with a real handle instead of "user12601765".

  • How to display more than one documents on windows 8 desktop?

    how to display more than one documents on windows 8 desktop?

    Adobe Reader Touch doesn't show more than one file on screen and doesn't show them on the desktop. Apparently these are very old fashioned things that Microsoft doesn't think we'll want to do any more and calls them "legacy" to make them sound antiquated.
    If you want to do these things use the legacy Adobe Reader, a much more powerful and flexible app (and not obsolete in the slightest). http://get.adobe.com/reader . There are no legacy apps in the Windows App Store.

Maybe you are looking for

  • The Apple trackpad won't except the "pinch open and close" command on Firefox version 4. It is configured correctly in the system preferences. HELP!

    I am using the Apple trackpad with Firefox version 4. The trackpad won't "pinch open and close". It is configured correctly in the system preferences. It also worked in version 3. Anyone have any suggestions?

  • Owners of the 80GB iPod classic, I have a few questions

    Ok, so I got my 80GB black iPod classic today and have a few questions, one of these I will need you to check something on your classic. 1: Can you get the digital booklets from the albums purchased on the store on your classic? 2: Is it normal for t

  • No more wiFi ??

    I had my Wireless G router for 3 years now and it was been working great until this morning.  I can't connect any device to my router now. My Laptop was working fine, I could play my xBox, and I could even get connects to my iPod. But now every time

  • OracleBamAdapter: "Bad response: 401 Unauthorized"

    Hi I'm trying to connect BPM to BAM over the OracleBamAdapter. I set properties of the outgoing connection "eis/bam/soap" to server "localhost" and port "29001" (on which BAM Server is running) plus userName and password. The user works well with iCo

  • Who's using Ultra Search?

    Hi all, I'm thinking about utilizing Ultra Search in a near-future project. Who's using it? How well does it work? What are you using it for? How hard was the implementation? Basically I'm looking for success/failure stories to help me figure out if