UK Leadership Program
I applied for the UK Leadership Program back in March and still have not heard back from Apple. I have, to no avail, tried to track down an email address or phone number to chase up my application. How can I find out the status of my application, even if I was unsuccessful?
Many thanks in advance.
If you're referring to the Apple Store Leader Program, here's what that page says:
What to expect.
You’ll receive an automated confirmation each time your resume is successfully submitted for an open position. If a recruiter or hiring manager wants to discuss next steps, they’ll get in touch using the contact information from your profile or resume.
So it would seem that there's no channel through which you can follow up. They'll contact you if they want to pursue the opportunity. You can, though, sign into your account through this page:
Sign in
and see if it shows any status for your application.
Regards.
Similar Messages
-
How to change field size using SQL against an oracle Database
I am an admitted novice user, looking to become more proficient.
I have a field in a table that I need to expand the field size. The table is called Inquiries. The data type is text. The current Field Size is 10. I want to increase it, to either the max, or somethign long enough to fit TECHNOLOGY LEADERSHIP PROGRAM.
What is the SQL command to change the field size, and what is the max for a Text Field SizeAnd/Or, an even better question might be,
Do I need to use SQL*PLUS to do this, or are there better tools. I.e, I like how in Access, you can open up a database in Design view and just change the amount for the field size. Is there a similar "easy" method to do something like that with an Oracle database.
My current version of the server/database is:
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
I was thinking I had to do SQL commands to perform the action, but there may be another way that I am not thinking about with all of the tools at my disposal. When I installed Oracle on my desktop, I installed most of the management tools and networking services, if that helps -
Is there a recommended size for photos used in Keynote?
I'm creating a slide presentation for our leadership program's graduation showing in photos all the activities. Is there a recommended size (in pixels or dpi) for full slide photos?
It really depends on the size of the screen that the presentation will displayed on. If the file size of the Keynote doc is not an issue you can make the resolution (in px) as large as you care to.
DPI is not relevent since it is used for print. -
Unwanted box appears around link
I have a vertical spry menu bar containing text that is linked to an anchor. At first it looks fine, but after I click on one link then a box witha dotted border appears around the linked text that my mouse is scrolling over. I have pasted my code below--does anyone see anything that would cause this or know of a fix? Thanks so much!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/basic.dwt" codeOutsideHTMLIsLocked="false" -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<!-- InstanceBeginEditable name="doctitle" -->
<title>zcomm- z team</title>
<!-- InstanceEndEditable -->
<style type="text/css">
<!--
img
border: 0px;
body {
font: 100% Verdana, Arial, Helvetica, sans-serif; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #000000;
margin: 0mm;
background-image: url(Images/BG_plaidnclouds_gray.jpg);
background-color: #333;
background-repeat:repeat;
background-attachment:fixed;
.oneColFixCtr #container {
width: 850px; /* the auto margins (in conjunction with a width) center the page */
border: thin none #FFF;
text-align: left; /* this overrides the text-align: center on the body element. */
margin-top: 0;
margin-right: auto;
margin-bottom: 0;
margin-left: auto;
height: auto;
position: relative;
background-color: transparent;
#logo {
-->
</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script type="text/javascript">
<!--
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
//-->
</script>
<link href="CSS/navbar_elements.css" rel="stylesheet" type="text/css" />
<!-- InstanceBeginEditable name="head" -->
<link href="CSS/text_styling.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
#apDiv7 {
position:absolute;
width:618px;
height:250px;
z-index:1;
left: 176px;
top: 290px;
#apDiv8 {
position:absolute;
width:154px;
height:115px;
z-index:1;
left: 0px;
top: 303px;
#apDiv9 {
position:absolute;
width:702px;
height:1182px;
z-index:1;
left: 75px;
top: 832px;
.name {
font-weight: bold;
#apDiv10 {
position:absolute;
width:504px;
height:111px;
z-index:1;
left: 97px;
top: 1195px;
-->
</style>
<link href="CSS/bottom_menu.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
#apDiv {
position:absolute;
width:812px;
height:27px;
z-index:1;
left: 1px;
top: 99px;
body {
background-image: url(Images/BG_plaidnclouds_gray.jpg);
a:link {
color: #FFF;
a:visited {
color: #FFF;
-->
</style>
<style type="text/css">
<!--
#apDiv19 {
position:absolute;
width:377px;
height:61px;
z-index:1;
left: 13px;
top: 283px;
-->
</style>
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
#apDiv11 {
position:absolute;
width:700px;
height:172px;
z-index:1;
left: 76px;
top: 362px;
-->
</style>
<style type="text/css">
<!--
a:hover {
color: #CC0000;
-->
</style>
<style type="text/css">
<!--
#apDiv12 {
position:absolute;
width:759px;
height:104px;
z-index:1;
left: -332px;
top: 184px;
-->
</style>
<style type="text/css">
<!--
#apDiv13 {
position:absolute;
width:189px;
height:338px;
z-index:1;
left: 63px;
top: 577px;
-->
</style>
<style type="text/css">
<!--
.name1 { font-weight: bold;
-->
</style>
<style type="text/css">
<!--
#apDiv14 {
position:absolute;
width:779px;
height:99px;
z-index:1;
-->
</style>
<!-- InstanceEndEditable -->
<style type="text/css">
<!--
#apDiv1 {
position:absolute;
width:160px;
height:150px;
z-index:1;
left: 7px;
top: 23px;
#apDiv2 {
position:absolute;
width:634px;
height:138px;
z-index:1;
left: 82px;
top: 502px;
#apDiv3 {
position:absolute;
width:827px;
height:226px;
z-index:1;
#apDiv4 {
position:absolute;
width:87px;
height:159px;
z-index:1;
left: 12px;
top: 144px;
#apDiv6 {
position:absolute;
width:204px;
height:185px;
z-index:3;
top: 15px;
left: 7px;
a:link {
text-decoration: none;
color: #FFF;
font-weight: bold;
a:visited {
text-decoration: none;
color: #FFF;
a:hover {
text-decoration: none;
color: #CC0000;
a:active {
text-decoration: none;
color: #FFF;
#apDiv5 {
position:absolute;
width:auto;
height:115px;
z-index:1;
#apDiv7 {
position:absolute;
width:658px;
height:321px;
z-index:1;
left: 200px;
top: 7px;
#apDiv8 {
position:absolute;
width:634px;
height:58px;
z-index:1;
left: 205px;
top: 81px;
-->
</style>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
a {
font-weight: bold;
-->
</style>
<link href="CSS/basic_template_CSS.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
#apDiv9 {
z-index:1;
-->
</style>
<link href="CSS/text_styling.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
-->
</style>
<link href="CSS/bottom_menu.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
#apDiv11 {
z-index:1;
-->
</style>
<link href="Images/favicon.ico" rel="shortcut icon" />
</head>
<body class="oneColFixCtr">
<div id="container">
<div id="apDiv6"><a href="index.html"><img src="Images/logo_14_BG.gif" width="171" height="171" /></a></div>
<div id="apDiv8">
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a class="MenuBarItemSubmenu" href="about.html">about</a>
<ul>
<li><a href="overview.html">overview</a></li>
<li><a href="z team.html">z team</a></li>
<li><a href="careers.html">careers</a></li>
</ul>
</li>
<li><a href="our services.html">our services</a></li>
<li><a class="MenuBarItemSubmenu" href="newsroom.html">newsroom</a>
<ul>
<li><a href="in the news.html">in the news</a> </li>
<li><a href="our news.html">our news</a></li>
<li><a href="twitter lineup.html">twitter lineup</a></li>
</ul>
</li>
<li><a href="our experience.html">our experience</a></li>
<li><a href="contact.html">contact</a></li>
</ul>
</div>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<div><!-- InstanceBeginEditable name="EditRegion3" -->
<div id="apDiv12"><img src="Images/page titles/images/page-titles_05.gif" width="1000" height="205" /></div>
<p> </p>
<p> </p>
<p> </p>
<div id="apDiv11">
<p><span class="bodytext"><span class="bodytext">Just like a championship sports team, zcomm has a roster of players--journalists, broadcasters, PR and marketing pros--each an all-star </span><span class="bodytext"> at his or her position, but with the skill and knowledge</span><span class="bodytext"> to play off each other's strengths.</span></span></p>
<p><span class="bodytext"><span class="bodytext">Our range of experience means we can deliver clever, successfully packaged client messages for broadcast or distribution no matter what the medium</span><span class="bodytext">.</span></span></p>
<p class="bodytext"> </p>
<p> </p>
</div>
<p> </p>
<p> </p>
<div id="apDiv19">
<ul id="MenuBar2" class="MenuBarHorizontal">
<li><a href="overview.html">overview</a></li>
<li><a href="z team.html">z team</a></li>
<li><a href="careers.html">careers</a></li>
</ul>
</div>
<p> </p>
<p> </p>
<p> </p>
<div id="apDiv9">
<p class="bodytext_small"><span class="name"><span class="name1"><a name="Rise" id="Rise"></a></span></span><span class="name">Risë Birnbaum</span>, Founder and Chief Executive Officer <a href="mailto:[email protected]">[email protected]</a><br />
More than just our founder, Risë is our muse. Under her leadership, zcomm has grown to become one of the highest-impact PR firms in the United States, gathering considerable international and national acclaim, including PRSA's Silver Anvil Award, <em>Washington Business Journal's</em> "Women Who Mean Business Award". And zcomm was just ranked #15 in revenue in DC by the <em>Washington Business Journal</em>.</p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"><span class="name"><a name="Joan" id="Joan"></a>Joan Carrese Sineni</span>, Executive Vice President <a href="mailto:[email protected]">[email protected]</a><br />
With more than twenty years of experience in the public relations and event marketing field, Joan is a customer service fanatic. Her expertise ranges from the restaurant industry to the world of fashion. On sunny weekends you can catch Joan zipping around in her convertible with her husband and two dogs doing her best Tony Stewart impression.</p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"><span class="name"><a name="Gary" id="Gary"></a>Gary Anderson</span>, Chief Financial Officer <a href="mailto:[email protected]">[email protected]</a><br />
Gary has been with zcomm for more than five years and is responsible for all aspects of client and vendor contracts, invoicing and billing. If it has a dollar sign on it, it’s Gary’s job. On weekends, Gary and family head to their cabin in the hills of West Virginia.</p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"><span class="name"><a name="JoAnn" id="JoAnn"></a>JoAnn Mangione</span>, Director <a href="mailto:[email protected]">[email protected]</a><br />
JoAnn has been developing and producing state-of-the-art videos for companies including Fortune 500 to small business and for 25 years. Her combined TV and public relations experience gives her the expertise to produce zcomm’s video projects and ensure the radio broadcast team gets stellar results for our clients. While living in Florida, JoAnn learned to snake hunt, a skill she’s still waiting to use in the Washington, DC area.</p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"><span class="name"><a name="Robin" id="Robin"></a>Robin Lane</span>, Director <a href="mailto:[email protected]">[email protected]</a><br />
A PR industry veteran, Robin brings more than a decade of experience developing and executing traditional and social media strategies and events, creating successful thought leadership programs and integrating SEO and other digital tools into PR campaigns. Robin works both with our clients and staff to develop effective PR strategies that provide measureable results to meet their individual goals. Robin can't get enough of the PR industry and also serves on the Board of Directors for the Washington/Metro IABC chapter as the Vice President of Professional Development. </p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"><br />
</p>
<p class="bodytext_small"><span class="name"><a name="Paula" id="Paula"></a>Paula Malozowski</span>, Manager- Promotions <a href="mailto:[email protected]">[email protected]</a><br />
Paula heads our radio promotions team at zcomm. Her knowledge of the industry is unparalleled. Her expertise allows her to negotiate with stations across the country to maximize the impact for your promotion. Born in Buenos Aires, Argentina, Paula is fluent in Spanish which makes it easy for her to get you the best promotional value in any language. </p>
<p class="bodytext_small"> </p>
<p class="bodytext_small"><br />
</p>
<p class="bodytext_small"><span class="name"><a name="Eric" id="Eric"></a>Eric Minuskin</span>, Manager- Broadcast <a href="mailto:[email protected]">[email protected]</a><br />
With more than 8 years of experience managing and executing public relations campaigns for clients in the consumer, healthcare, technology, sports and entertainment industries, Eric heads our broadcast team. Eric develops and oversees account activities for national and local clients across a range of broadcast media platforms.</p>
<p class="bodytext_small"> </p>
<p> </p>
<p> </p>
<p><br />
</p>
</div>
<p> </p>
<p> </p>
<p> </p>
<div id="apDiv13">
<ul id="MenuBar3" class="MenuBarVertical">
<li><a href="#Rise">Risë Birnbaum</a> </li>
<li><a href="#Joan">Joan Carrese Sineni</a></li>
<li><a href="#Gary">Gary Anderson</a></li>
<li><a href="#JoAnn">JoAnn Mangione</a></li>
<li><a href="#Robin">Robin Lane</a></li>
<li><a href="#Paula">Paula Malozowski</a></li>
<li><a href="#Eric">Eric Minuskin</a></li>
</ul>
</div>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<div class="footer_menu" id="apDiv14">
<p>zcomm is a national, award-winning marketing communications firm offering the widest range of broadcast PR services available. We specialize in creating, packaging and distributing targeted client messages through the latest technology for a variety of industries: consumer product, healthcare, food and beverage, energy, corporate, government, telecomm, tech and more.</p>
<p><a href="index.html">home</a> | <a href="about.html">about</a> | <a href="z team.html">z team</a> | <a href="careers.html">careers</a> | <a href="newsroom.html">newsroom</a> | <a href="http://www.radionewz.com/">radionewz</a> | <a href="our experience.html">our experience</a> | <a href="contact.html">contact</a></p>
</div>
<p> </p>
<script type="text/javascript">
<!--
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
var MenuBar3 = new Spry.Widget.MenuBar("MenuBar3", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
<!-- InstanceEndEditable --></div>
</div>
<script type="text/javascript">
<!--
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
</body>
<!-- InstanceEnd --></html>As a side comment about your layout code, APDivs are going to come back and bite you in the butt. Better you find out now rather than later.
Here is why:
http://apptools.com/examples/pagelayout101.php
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Very Bad Experience with EDGE Program, Trying to get a resolution for 2 Months
This is long winded but a lot has happened in two months. My wife and I are both on the Edge program. When she initially signed up for the program she got the Iphone 5. She ended up having some technical problems with the screen on her phone so she took it to an Apple store. The Apple representative replaced the phone for her and this is where all of our problems started. A couple months later she was eligible to “Edge Up.” She decided to do that when the newest Iphone came out. She got the Iphone 6 and sent her old phone back just like she was supposed to. The phone was sent back to her because Verizon said it wasn’t the original phone. She called Verizon and explained what happened and was instructed to resend the phone, which she did. We didn’t hear any more about it until our October 27th bill was $398.51 higher than it should have been. They charged us as if we never returned the phone.
We called Verizon a couple times and finally on November 8th a ticket ([removed]) was filed. At that time the representative told us she would follow up within the next couple days but she didn’t. During the ensuing month we made close to 15 inquiries (THAT IS NOT AN EXAGGERATION) with Verizon customer service. During the first 3 or 4 calls we were told that the refund should be coming soon and to be patient. After that the representatives would ask some new questions but mostly ones that we answered on previous calls. The representatives would say they’d have to do some investigating and would give us a call back in a couple days. With the exception of one time, they never did so my wife or I would call Verizon back. Each time we’d be connected to a different person so we would have to repeat the same story and answer repetitive questions. Before we would get off the phone we would ask to make sure the account notes were updated in hopes that we wouldn’t have to keep explaining ourselves.
We were becoming very frustrated over the whole situation. It bothered us that they weren’t getting back to us, that each time we called we had to tell the same information and mostly because we weren’t getting any answers about our four hundred dollars.
Finally about a WHOLE MONTH after the original ticket was filed, on December 5th I finally spoke to a Representative (JP) that was helpful. Apparently, the ticket was stalled because the Verizon Rep either put incorrect or inadequate information on the ticket. She was able to track it down with the USPS tracking number. That frustrated us further because we couldn’t understand why she was able to find this out but why none of the other people could. She was going to look into this further and gave me an email address so I wouldn’t have to keep talking to new people.
We have emailed back in forth many times since December 5th. After the third submission of the ticket by JP, some warehouse in TX has confirmed they received my wife’s phone but I still don’t have a refund. I don’t know what to do!!! At this point I am beyond frustrated. I actually feel a little helpless. This has gone on for over two months. My wife and I have literally spent hours on the phone with Verizon. I haven’t heard from JP since before Christmas. I never would have before but I am considering another wireless company. Can anyone on here help me or point me to someone that can? For anyone that is currently considering the edge program I would think twice.
If anyone is willing to help or has any ideas please let me know.
Ticket number removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin ModeratorIt seems as if you have done all that should be expected of you. I have seen where exchanging the phone at an Apple store has caused this type of problem when performing an Edge Up when the Apple employee who makes the exchange does not file the proper paperwork in order to have this reflected in Verizon's records.
I would try contacting the area president for your location or possibly the person in charge of national customer service. The following site has information about Verizon Wireless leadership with a method to make contact. Simply click on the "View Profile" link on the person in question and at the bottom of the page should be a contact line.
I would relate your story to one of these executives and am confident they will have the fortitude to help you out in a timely fashion.
Good luck.
Leadership | Verizon Wireless -
Programming Dallas Semiconductor DS2433 4-kb EEPROM
Hi, I'm looking for some help programming a single DS2433 on a 1-wire network with 2 of these devices connected. I'm using the TMEX API with the IBFS32.dll library. Has anybody done this in LabVIEW?
I can successfully see the unique ROM of each device using the TMRom command, but cannot write to the memory unless using the skip_rom command. Using this command ignores the ROM stored in the buffer and all devices on the network listen to any memory commands that come next. As such, when I write to memory, both connected devices receive the data.
I've attempted using the match_rom command so only the desired device listens to following memory commands, but something is going wrong with the way I'm passing the 64-bit ROM ID. Can anybody explain explicitly how to construct the tran_buffer for completing the match_rom command?
I can post some code if necessary.
Thanks,
- Kevin09-09-2012
Dear Hiring Manager:
As a Senior LabVIEW Engineer, and long time contributor to the technical ladder, I have expertise in consumer and government communication systems. I have 20 plus years excelling in manufacturing, development, material and reliability engineering. Additionally, I have 10 plus years of automation expertise.
Whether planning for new product introduction or field failure rate improvements, I believe you will find my experience in RF, hardware & software and deployment of root cause analysis methods into key processes, a value-added asset to your programs.
My broad technical skills and leadership abilities have been major contributors to driving cost reduction and corrective action over many new product launches, and I am looking forward to repeating success stories in your group.
Experience has taught me that technical skill alone cannot guarantee meeting all goals and I bring your firm commitment, perseverance, flexibility, and the critical ability to work productively with others in challenging situations.
I welcome the opportunity to speak with you further about how my diverse experience and up-to-date skills will add value to your company’s bottom line.
I look forward to hearing from you directly at (561) 792-6026, (561) 351-4776
Sincerely,
Brian N. Nover
14635 Horseshoe Trace
Wellington, FL 33414
Attachments:
Nover-Brian-Resume-2012RFLV.docx 23 KB -
Verizon's deceptive recycling program
Duplicate post - please see discussion here:
https://community.verizonwireless.com/thread/807642
Message was edited by: Admin ModeratorI went to Verizon Executive Customer Service you can find your area Customer Service head here:aboutus.verizonwireless.com/leadership/executive/
You'll get a call from one of their reps in a couple of days. It'll be an Atlanta GA number. They'll listen to your complaint and they are now aware that there are many people that have been affected just like you. They are supposedly looking into this 3rd Party company they hired to handle the device recycling to see what the problem is...?
They gave me $75 credit statement as a "good faith" however I'm still not satisfied. I was quoted $350 for an excellent phone. I've totaled $138 out of the $350 I was quoted. I feel completely robbed. My phone would've sold on eBay in excellent condition for $400. I did this program in '12 and it worked fine, no problems. I'll never do it again.
I also complained to my Attorney General Office as well as the BBB. I would recommend all avenues. Many, many people have been screwed over. Good luck! -
Problem with threads, program always crash
new to threads, may be doing something COMPLETELY wrong. When I run the program I get a couple of NullPointerExceptions in Thread-0 and Thread-1. I'm confused because it screws up when I call size() for arrayList, and in the API size doesn't throw anything.
public class ProducerConsumerRunner
public static void main(String args[])
Queue q = new Queue(QUEUE_MAX_SIZE);
ProducerRunnable producer = new ProducerRunnable(q, ITERATIONS);
ConsumerRunnable consumer = new ConsumerRunnable(q, ITERATIONS);
//works good up to here
Thread t1 = new Thread(producer);
Thread t2 = new Thread(consumer);
t1.start();
t2.start();
private static int ITERATIONS = 50;
private static int QUEUE_MAX_SIZE = 25;
import java.util.ArrayList;
import java.util.concurrent.locks.ReentrantLock;
public class Queue {
public Queue(int maxSize)
list = new ReentrantLock();
underLimit = list.newCondition();
MAX_SIZE = maxSize;
public void add(String line)
list.lock();
try{
System.out.println("add method of Queue");
while(record.size() >= MAX_SIZE){//things get screwed up when this condition is evaluated
//size method is crashing the program
System.out.println("2");
underLimit.await();
System.out.println("3");
record.add(line);
}catch(java.lang.InterruptedException e){
System.out.println("await interupted: "+e.getMessage());
}finally{
list.unlock();
public void remove(int line)
list.lock();
record.remove(line);
list.unlock();
public ArrayList<String> record;
private final ReentrantLock list;
private final java.util.concurrent.locks.Condition underLimit;
private final int MAX_SIZE;
import java.util.Date;
public class ProducerRunnable implements Runnable{
public ProducerRunnable(Queue q, int itterations)
this.q = q;
ITTERATIONS = itterations;
public void run()
String date;
for(int i = 0; i<ITTERATIONS; i++)
date = new Date().toString();
q.add(date);//this is where it screws up
System.out.println(date+" added");
try{
Thread.sleep(100);
}catch(java.lang.InterruptedException e){
System.out.println("ProduccerRunnable's sleep was interupted");
private final Queue q;
private final int ITTERATIONS;
public class ConsumerRunnable implements Runnable{
public ConsumerRunnable(Queue q, int itterations)
this.q = q;
ITTERATIONS = itterations;
public void run()
//Queue q = new Queue();
int length;
for(int i = 0; i<ITTERATIONS; i++)
length = q.record.size();//things are getting screwed up here
while(q.record.get(length) == null)
length--;
System.out.println((String)q.record.get(length));
q.remove(length);
try{
Thread.sleep(100);
}catch(java.lang.InterruptedException e){
System.out.println("ConsumerRunnable's sleep was interupted");
private final Queue q;
private final int ITTERATIONS;
}question:
this works right
public void remove()
list.lock();
int line = 0;
try{
*while(record.size() < 1)*
range.await();
record.remove(line);
range.signalAll();
}catch(java.lang.InterruptedException e){
System.out.println("await interupted: "+e.getMessage());
}finally{
list.unlock();
}this is deadlock
*int list = 0;*
*while((list = record.size)<1) was screwing things up because of the assignment*record is ArrayList of strings. when better to use Vector instead of ArrayList? i notice no differnce and i use threads
initially I thought record.size was being evaluated and before could be assigned to list, time slice ran out. this could not be case because I use ReentrantLock (list) to lock it.
Edited by: bean-planet on Apr 1, 2009 4:31 PM -
Tried
https://discussions.apple.com/thread/2713232?start=0&tstart=0
and
http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
with no avail!!!
iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
PLEASE HELP!!!Update:
I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
Microsoft Windows Vista Home Edition (Build 6000)
MICRO-STAR INC. MS-6728
iTunes 7.6.0.29
QuickTime 7.4
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
iTunes Serial Number 20D6EAF059AB94B4
Current user is not an administrator.
The current local date and time is 2008-01-15 19:09:32.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., Radeon X1600/X1650 Series
ATI Technologies Inc., Radeon X1600/1650 Series Secondary
** External Plug-ins Information **
Plug-in Name: Last.fm iTunes plugin
Plug-in Loaded: Yes
Plug-in Version: 0.0.13
Plug-in File Version: 2.0.13.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
No drives showed up to be tested. -
Error while running a Java Program
Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards -
The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
I need to use my Adobe programs, rescue my email, i-tunes and iphoto data. The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash. There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine. Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.No, the disk was backed up with time machine a few hours prior to the crash. I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up) was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available. And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive. I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed. But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive.
I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder). And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash. That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up. Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive. So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
Thanks for any help. Peggy
Message was edited by: peggy toole -
Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
Does anyone have any info as to what the problem may be and how to correct it.
ThanksThanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue. -
Photoshop CS2 (program error msg)... Help please!!
I have installed the full creative suite 2 on my new iMac. everything works fine except photoshop?!!?
Illustrator works great, In-Design works great, But when i try to open a file or create a new page in PS it tells me "Could not create document because of a program error"???? ***?
I had a previous version of CS and it worked fine for one day, then that started happening. I installed the CS2 trial version, and it would still give me the same error msg. I erased everything and installed the new CS2 (photoshop, illustrator , in-design and acrobat). It still gives me the same darn msg.???
Any help would be greatly appreciated!
thanksSee the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
PhotoShop CS2 "Program Error" when printing
I am posting this to the Adobe Forums as well, but thought someone here might have some ideas. am having an intermittent problem printing from PhotoShop CS2 to an Epson 9800. When printing large files (200 MB average) to the Epson, PhotoShop will spool the job, taking about 50% longer than normal, and when complete, displays the following message..."The file XXXX.tif could not be printed because of a program error" No job ever gets to the print que. This happens about 80% of the time when printing. Quitting and restarting PhotoShop generally fixes the problem, and the file can be printed from another computer without issue, so this is not file specific. I have 8GB of RAM installed and PhotoShop running under 100% available memory, cache level at 8, with a dedicated 180GB scratch disk. Memory should NOT be the problem, though I do often have the full layered version of the file open in the background (I am printing from a flattened copy. I have observed that the problem is less likely to occur if no other files are open. I have a second G5 with the exact same software setup (OS, Print Driver and PhotoShop down to the decimal version #) that works perfectly every time. I have run all of the System utilities (Repair Permissions, FSCK, etc), reset the OSX printing system, reset PS preferences, trashed and re installed CS, as well as the Epson printer driver, all with no success. Any other trouble shooting ideas would be greatly appreciated. I would love to avoid a System reinstall.
See the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
KABA connection issue - program not registered
I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.
Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor.
Maybe you are looking for
-
Display Header data to item level in me21n
Dear Friends , I have the requirement that Incoterm field in me21n at header level while creating purchase order needs to get reflected at item level too. Currently it is blank (at item level). Is it the development or Customisation? Can anybody ple
-
Error in Synchronizing Slave Repository
Hi All, I've created a Master / Slave pattern and when i make any changes in the Master and Synchronize the slave i get the following error: <b>"Unable to retrieve synchronization data from master repository. See the Assertion Log for more informatio
-
I also tried to uninstall and reinstall multiple times and Firefox will still not load pages.
-
Complete my Album - track missing from download!
Hi I bought a single a while back (Witchcraft - Pendulum) and iTunes offered me to complete my album. I did so, however, the album it downloaded is missing the track that I had originally (Witchcraft) as expected, but as it was a single and not part
-
How to remove 3D view in Maps?
How do I remove the 3D view from Maps so that it STOPS accidentally switching to the extremely pathetic and annoying 3D view EVERY TIME I try to zoom in?!