ULTRA 5 OPENBOOT serial console disabling - for the use of USB key/mouse

I ve got an ULTRA 5, I installed a NEC USB PCI card in it, in works no problemo, I can use USB keyboard and mouse under X-WINDOWS (openbsd unix). But this works ONLY if I have classical SUN TYPE 5c keyboard attached.
Then the system boots, starts X and I can use the USB devices (key/mouse) under Xwindows.
But when I unplug the SUN TYPE keyboard out, and start the computer, I see just blank black screen on my monitor.
The X , or anything starts not. The display screen is and stays blank.
I think, this is because when I dont atach the SUN keyboard at the startup, the system switch output to the serial port console, am I right ???
Please, how can I disable this option ???
I want to use just the USB key/mouse. But when I start the system with no SUN TYPE keyboard, I see just black screen. What can I do with it?

Hello.
I could take a look on the document from SunSolve and they write you should set the input-device to ttya in OpenBoot:
ok setenv input-device ttyaMaybe in the other case the serial port will check if there is really something connected to the ttya input port. If the system works if something is connected to ttya but it does not work if nothing is connected (neither keyboard nor null modem cable) this may be the case.
Martin
-- EDIT --
The SunSolve stuff does not modify the X-Server configuration files but they modify the file /etc/system. They add a line like this to the file:
set consconfig:usb_kb_path="/pci@1f,0/.../keyboard@1"
set consconfig:usb_ms_path="/pci@1f,0/.../mouse@2"(Both paths are relative to "/devices" and begin with "/").
This will make the keyboard usable even in the console login.

Similar Messages

  • I'm getting the error message "Photos folder syncing has been disabled for the iPhone my iPhone because the folder "Pictures" cannot be found."

    I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
    Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
    Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
    How do I fix this?

    Hi there scarbo59,
    You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below. 
    iOS: Unable to import photos to computer
    -Griff W. 

  • [HELP] Error: "JDBC theme based FOI support is disabled for the given data"

    Hi all,
    I have already set up MapViewer version 10.1.3.3 on BISE1 10g OC4J server. I am current using JDK 1.6. I create a mvdemo/mvdemo user for demo data.
    The MapViewer demo is running fine with some demo without CHART. But give this error with some maps that have CHART like: "Dynamic theme, BI data and Pie chart style", "Dynamic theme and dynamic Bar chart style". The error is:
    ----------ERROR------------
    Cannot process the FOI response from MapViewer server. Server message is: <?xml version=\"1.0\" encoding=\"UTF-8\" ?> <oms_error> MAPVIEWER-06009: Error processing an FOI request.\nRoot cause:FOIServlet:MAPVIEWER-06016: JDBC theme based FOI support is disabled for the given data source. [mvdemo]</oms_error>.
    ----------END ERROR------
    I searched many threads on this forum, some point me to have this allow_jdbc_theme_based_foi="true" in mapViewerConfig.xml and restart MapViewer.
    <map_data_source name="mvdemo"
    jdbc_host="localhost"
    jdbc_sid="bise1db"
    jdbc_port="1521"
    jdbc_user="mvdemo"
    jdbc_password="mvdemo"
    jdbc_mode="thin"
    number_of_mappers="3"
    allow_jdbc_theme_based_foi="true"
    />
    Error Images: [http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png|http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png]
    I have this configuration, but no luck. Could anyone show me how to resolve this problem?
    Rgds,
    Dung Nguyen

    Oop, i managed to have this prob resolved!
    My prob may come from this I use both scott and mvdemo schema for keeping demo data (import demo data).
    Steps i made to resolve my prob are:
    1) Undeploy MapViewer from Application Server Control (http://localhost:9704/em in my case)
    2) Drop user mvdemo
    3) Download mapviewer kit from Oracle Fusion Middleware MapViewer & Map Builder Version 11.1.1.2
    4) Deploy MapViewer again
    5) Recreate mvdemo and import demo data
    6) Run mcsdefinition.sql, mvdemo.sql with mvdemo user (granted dba already)
    7) Edit mapViewerConfig.xml
    <map_data_source name="mvdemo"
    jdbc_host="dungnguyen-pc"
    jdbc_sid="bise1db"
    jdbc_port="1521"
    jdbc_user="mvdemo"
    jdbc_password="!mvdemo"
    jdbc_mode="thin"
    number_of_mappers="3"
    allow_jdbc_theme_based_foi="true"
    />
    Save & Restart MapViewer
    And now, all demos run fine. Hope this helpful for who meet prob like my case.

  • HT1212 My daughter's ipod touch is disabled for the next 43 years. Any hints on what she may have done to cuase this and how to fix it?

    My daughter's ipod touch is disabled for the next 43 years. Any hints on how to fix this? I have followed the steps listed on the apple website to p lace it into recovery mode, but the ipod is now "stuck" on the connect to itunes part. Thanks!

    Sounds like a case of entering an incorrect passcode over and over.  Only fix is to follow the instructions in that article you reference, HT1212, and it may take a couple tries to get it to work right.

  • Restrictions for the use of MapKit in a paid iOS6 app that caches map tiles.

    Can anybody advise what restrictions exist for the use of MapKit for a paid app that caches map tiles for off-line use.  The app is targetted at iOS6 and above.  I haven't found any clear answers on this,
    Is there a cost associated with using map tiles if you charge more than $0 for the app?  I understood that this could not be done for free in iOS 5 due to Google licence terms.
    Also, under the iOS6 Apple Maps licence, can map tiles be cached for off-line use?
    Many thanks to anyone who has the answer to these questions.  A link to a document from Apple would be fantastic.
    Geoff

    Just in case you didn't already go there and see it, there is a specific developer forum for discussing MapKit and some other things I can't talk about in a public place.  Look for a developer forum that mentions maps in the name and that'll be it.  The people there can answer your question if it hasn't already been answered.

  • How do i disable orientations for a specific view in my tab bar project without disabling for the other views?

    How do i disable orientations for a specific view in my tab bar project without disabling for the other views?
    Any suggestions?

    Note that you can also hide the tab bar completely with code in the userChrome.css file.
    Add code to the <b>userChrome.css</b> file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #TabsToolbar { display: none !important; }
    </nowiki></pre>
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration

  • Restriction for the use of last_record in 10g forms

    Hi,
    When I was working on Forms 6i with the query in the trigger When_new_form_instance:
    go_block('ABC');
    execute_query;
    last_record;
    first record;
    go_block('DEF');
    execute_query;
    last_record;
    first record;
    It worked and gave correct data on frontend.
    When the same was used in 10g forms, it gave incorrect data.When we removed last_record from the query, it worked.
    Could somebody tell me is there some kind of restriction for the use of last_record in 10g forms? If yes, what kind of?
    Thanks,
    Neha

    When I set Query All records to Yes.
    Surprisingly it gives incorrect data.
    This is what is bothering me.
    As i said earlier i was using last_record for
    navigation purpose to fetch all the records from the
    database and then first_record to highlight the first
    record.
    You don't need to do that, that is poor programming logic. Instead change the block property Query All Records and set it to Yes.
    This will fetch all the records from the database and the highlight will be on the first record;
    Regards,
    Tony

  • Is it possible to update QT 7 to higher version? I ran the update once and all the Pro features were disabled with the message: Your Reg Key is for QT Version 7 only, I had to reinstal Win after updating, because the new  QT  kept the reg with no pro func

    Is it possible to update QT 7 to higher version? I ran the update once and all the Pro features were disabled with the message: Your Reg Key is for QT Version 7 only. I uninstalled the new QT version, and reinstalled the old QT 7 but the Pro functions were still unavailable, so , I had to reinstal Windows to get my Pro functions back. This happened quite a while ago, but every time I get the "Update" message, I am afraid to launch it.

    All I can say is that the problem you experienced is not by design but was instead some sort of technical fault, either in QuickTime or in Windows. I've upgraded QuickTime for Windows a number of times, to various new versions of QuickTime 7, and it's never removed my Pro key. My guess, and this is strictly a guess, is that something corrupted the preference file where the Pro key is held, disabling the Pro features and not allowing you to re-enter your key. Since you reinstalled Windows, I would expect that future updates to QuickTime will go without problem, and if for some reason the Pro features are ever removed, re-entering your Pro key should get them back.
    Regards.

  • Customizations are disabled for the node "ProposedJobVO.xml"

    Hi,
    We are trying to add extensions to a fusion Application. When i have created an Application 'Fusion Customizations Application'.
    In the Role 'Oracle Fusion Applications Administratror Customizations', and in Customizable Archive, Some Business Components are Not customizable while some of them are Customizable.
    getting below error in Log file
    Customizations are disabled for the node "ProposedJobVO.xml" because it is not part of the project contentset.
    Does this mean we cannot modify this VO or we need to do anything else to get these components included in Project Content Set?
    Thanks
    Kaja

    "Customizations are disabled for the node xxxx because it is not part of the project contentset". This warning is logged if you try to open a node for customization in customizaion role IN FA environment from Application Resources->connections->customizable archive ,
    as this node is not a part of project. In order to add it to the project you will have to right click on the node and select customize this will add the node to the virtual content set of project.
    Now this node will be available under project and can be customized.

  • What to use for the events of 2 keys pressed simultaneously?

    Question:
    What to use for the events of 2 keys pressed simultaneously? As the key listener has limited functionality, in this case, I need something that can act to two events (see below)
    Goal
    1. A user presses right and up at the same time
    2. Program responds to this event changing BOTH the vertical and horizontal speeds of the player
    Problem
    I currently have a key listener to do this, using key pressed, however, it only acts to up OR right at one point in time. So the user can only increase his or her vertical speed; or horizontal speed at one point in time. Instead of increasing them both.
    Example
    Here is an example of the game: http://www.kongregate.com/games/MINDistortion/bubbles-2

    DarrylBurke wrote:
    I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
    dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
    P.S. I tested it out. Works like a charm.
    -Create booleans to handle each key
    -Set to true on press
    -Set to false on release
    -Check and update in separate thread accordingly

  • [svn] 1313: Fix for the use namespace problems we've been having with ASC ( I hope).

    Revision: 1313
    Author: [email protected]
    Date: 2008-04-20 09:41:41 -0700 (Sun, 20 Apr 2008)
    Log Message:
    Fix for the use namespace problems we've been having with ASC (I hope). The problem was that the use directive was being defined after we had called finish package. The UseDirectiveNode has a pkgdef ptr, and does different things depending if that ptr is null or not. It should not be null when the UseDirective is inside the package - but since we were generating the UseDirectiveNode after we had called finishPackage the UseDirectiveNode didn't have it's pkgdef ptr set, and so things went awry as the package didn't get set up with all the correct open namespaces. I haven't tested this in authoring/flex but I am pretty sure that this will fix all the problems we're seeing.
    Modified Paths:
    flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/Parser.java

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Garageband - does it allow for the use of software like "ILIO Origins for EXS/GIGA?"

    I am completely new to the modern world of iOS (just bought a Apple iMac ME089LL/A 27-Inch Desktop), and Garageband, and recording music and such. I've watched enough tutorials now to know that Garageband has virtual instrument libraries. I want to know if Garageband will allow for the use of more sophisticated sounds, specifically those in the ILIO Origins for EXS/GIGA

    I am also baffled. I tried to find this "default Captivate quiz" in the help section of Captivate with no results. When I again contacted the representative, he closed the conversation before speaking with me.
    Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 4 second(s) or longer as there are 1 customer(s) in line ahead of you.
    You are now chatting with 'Khyati'
    Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
    I have posted the entire correspondence on Adobe Captivate's Facebook page in the hopes that I might get some swift assistance from the company.

  • Who could give the license for the use of the songs?

    Hey guys
    Does anybody know the real names or authors of the songs "Dogma" and "Strategy" (both under "Intense" list) and also "peach Cobbler" (under "Cheerful")?
    Basically, I need to know who could give the license for the use of these songs. Do you know any companies that license them or is Apple?
    Thank you
    Sinisa

    Apple's license agreement says:
    You may use the Apple and third party audio loop content (“Audio Content”),
    contained in or otherwise included with the Apple Software, on a royalty-free basis, to create your own original
    soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were
    created using the Audio Content, however, individual samples, sound sets, or audio loops may not be commercially or
    otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound
    libraries, sound effects or music beds.
    So you're fine as long as you add something to the loops or jingles - what's forbidden is to distribute one of them as a song. But that's probably not what you want to do.

  • [svn:fx-trunk] 12367: Added deprecation warning for the use of SVG.

    Revision: 12367
    Revision: 12367
    Author:   [email protected]
    Date:     2009-12-02 08:30:21 -0800 (Wed, 02 Dec 2009)
    Log Message:
    Added deprecation warning for the use of SVG.
    QE notes: None
    Doc notes: None
    Bugs: SDK-24392
    Reviewer: Paul
    Tests run: SVG test cases.
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24392
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/SVGTranscoder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties

  • HT204380 Are you charged for the use of face time?

    Are you charged for the use of face time?

    Currently FaceTime only works over Wi-Fi, so no, you don't get charged for using it. You just have to pay your monthly internet bill to pay for the Wi-Fi.

Maybe you are looking for