Unable to access/load a specific webpage through gateway

I am unable to access http://giftedhomeschoolers.org from any of our devices on our home network. This is the only website that we are have this issue. Tried on several computers (MAC, Windows) and mobile devices (Kindle, iPhone). On iPhone, when I disable the wifi I am able to get to the site. Any help is appreciated.

In these situations it can be basically four things:
1) DNS problem: the AT&T DNS servers can't resolve the IP address of the site
2) Server black list: AT&T is deliverately blocking traffic to the IP based on earlier misdeeds from it
3) Routing issue: There's a bad routing table somewhere between you and the remote site
4) Site Configuration Issue: The server is configured not to respond to your IP address range, due to outdated configuration issue, or blocking due to past misdeeds at your address.
You can work with AT&T Technical Support on 1 through 3, though the tier 1 people won't have a clue, and half of the tier 2 people won't either, and the rest may not be able to spare the time.
You'd have to work with the site itself if the problem is #4.

Similar Messages

WARNING: Unable to access loaded classes

Hi,
Just installed OAS 10.1.3 on AIX. When I started the home OC4J instance, I got "WARNING: Unable to access loaded classes" in the OC4J~home~default_group~1 log file. Why this happened? Which classes unable to access?
Thanks in advance.
Richard

Fixed as per Oracle Support (Note 376890.1 and Bug.5252013, not published yet)
set the java system property in opmn.xml for home OC4J instance
-Dclass.transfer=delegate

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

I cannot load a specific webpage. Another page is blocking

when I try to load a specific page, I get an error message and instead, Firefox is trying t load http://www.server.localzone/index.html
I probably got that when I was using a hotspot. How can I delete that ?
Thanks for your reply !

Go to your URL Bar Type in "about:config", Click yes, It should pull up a list, type "www.server.localzone" in, if anything pops up, Right click and choose reset. Restart Firefox.
Also make sure your homepage is set to what you original had it is/ or default.
Try starting in safe mode. "https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode"
Try checking Options > Advanced > Network: Under Connection click settings. Make sure "Use system proxy settings" is chosen.

Unable to access Preference Pane! webpages corrupt!

For some odd reason, Safari will not load images and displays pages in a random mess. I am not able to access preferences either - autofill dialogue window appears in it's place.
Yes I did just to an update and then things all went wrong - I wish safari was as good as Firefox

In OS X Tiger, a small pill button can be found in the upper right corner of the Preference Panel. If you click on it, either the Preference Panel will expand or contract based on its existing appearance. Sounds like the Panel was set to its contracted state. Recreating the Preference file is one way to remedy the problem, as the default is the expanded state. The other way would have been to click on the pill button, which would have preserved your existing preference selections.
As you have reset your Preferences, make sure you reestablish any of your custom preferences both in the Preference Panels and in the View and Edit (spelling) menus. One last thing, if you open your Bookmarks Manager (command/option/B keys) you'll notice you have new Bookmark collections courtesy of the Preference reset. You can highlight/delete these if you don't want them.
Safari will not load images and displays pages in a random mess.
Is this still occurring?
Message was edited by: Hawaiian_Starman

IPhone - HELP with selecting a row and loading a specific webpage

Thee following code works to open different webpages...if i click on Row 0 then it opens the page...
http://www.webpage.com/iphoneapp/1.html
But I need each row selected to open an unrelated webage.
Since the title is different depending on the row that is selected, can I add another criteria within this code (i.e. if title = "@Joey" then self loadremotehtml..... if title = "@Billy" then selfloadremotehtml....
Where/How do I add this other variable? THANKS!!
else if([name isEqualToString:@"Band Blogs"]) {
MoreBioViewController2* bioViewController = [self.navigationController.viewControllers objectAtIndex:1];
self.title = [bioViewController.displayList objectAtIndex:bioViewController.selectedBioIndex];
[self loadRemoteHTML:[NSString stringWithFormat:@"http://www.webpage.com/iphoneapp/%d.html",bioViewController. selectedBioIndex+1] ];

Use a h:commandButton and the HtmlDataTable#getRowData().
Also see this article for some pointers: [http://balusc.blogspot.com/2006/06/using-datatables.html].

Access to portal desktop denied through gateway

I'm trying to get the gateway component to configured and working. I've installed gateway on a separate box from my portal server. When I go to the gateway url (using either https or http) I get prompted to login. Once I submit my user credentials, I get this message:
Access to this resource is denied !!
Contact your administrator
If I enter incorrect user credentials, I get an authentication failed, as expected. So authentication is working, but for some reason, I just can't get to the portal desktop! I ensured that my user account has the Access List service. And I haven't changed any URL allow/deny lists from whatever the default templates were, they still allow *.
Any ideas?
Thanks,
Patricia

Are you able to get to the portal desktop without going throwing the gateway ?
What the does the debug error logs show ?

Unable to access the Firewall through ASDM

                   Hi All,
Thanks in advance ,
in my organisatin we are facing one issue with launching of ASDM in ASA 5520 , when wer are trying to access the Firewall through ASDM we are unable to access that , see the java error loggs below , yes i know if we reload the firewall then this problem will solve , but my organisation management donsent want to reload the firewall , other procedure is to upgrage the ASDM version , just let me know the procedure for this
Using JRE version 1.7.0_25 Java HotSpot(TM) Client VM
User home directory = C:\Users\shussain
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
m:   print memory usage
q:   hide console
s:   dump system properties
ASDM Application Logging Started at Tue Aug 20 11:04:48 AST 2013
Local Launcher Version = 1.5.30
Local Launcher Version Display = 1.5(30)
OK button clicked
Trying for ASDM Version file; url =
https://192.168.50.2/admin/
Server Version = 6.1(3)
Server Launcher Version = 1.5.30, size = 319488 bytes
invoking SGZ Loader..
Cache location = C:/Users/shussain/.asdm/cache
Exception in thread "SGZ Loader: launchSgzApplet" java.lang.NumberFormatException: For input string: "1 year 192"
at java.lang.NumberFormatException.forInputString(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at com.cisco.pdm.Check.h(DashoA10*..:1358)
at com.cisco.pdm.Check.c(DashoA10*..:858)
at com.cisco.pdm.Check.a(DashoA10*..:438)
at com.cisco.pdm.PDMApplet.start(DashoA10*..:132)
at com.cisco.nm.dice.loader.r.run(DashoA19*..:410)

dear marvin,
find my firewall sh version output, and asdm version ,
ciscoasa# sh ver
Cisco Adaptive Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(3)
Compiled on Thu 07-Aug-08 20:53 by builders
System image file is "disk0:/asa804-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 1 year 193 days
Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is 0021.a09a.ba76, irq 9
1: Ext: GigabitEthernet0/1 : address is 0021.a09a.ba77, irq 9
2: Ext: GigabitEthernet0/2 : address is 0021.a09a.ba78, irq 9
3: Ext: GigabitEthernet0/3 : address is 0021.a09a.ba79, irq 9
4: Ext: Management0/0       : address is 0021.a09a.ba7a, irq 11
5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs                : 150
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Disabled
Security Contexts            : 2
GTP/GPRS                     : Disabled
VPN Peers                    : 750
WebVPN Peers                 : 2
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions            : 2
This platform has an ASA 5520 VPN Plus license.
Serial Number: JMX1304L0HA
Running Activation Key: 0x0313c076 0x58bdf52e 0xa83245ac 0xb460b058 0x88201caa
Configuration register is 0x1
Configuration last modified by enable_15 at 10:18:47.850 AST Wed Aug 21 2013
ciscoasa#
ciscoasa# sh run asdm
asdm image disk0:/asdm-613.bin
asdm location internal-network1 255.255.0.0 internal

I am unable to access my email through Firefox. All other bookmarks respond.

I am unable to access my email account through Firefox. All other bookmarks respond correctly.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
If you use a bookmark to go directly to a specific page then try to follow the from starting with the home page of that e-mail service in case the bookmarked link is broken.

Unable to access Facebook through app on all iOS devices

I just encountered a rather strange problem - I'm suddenly unable to access Facebook via the app on any iOS device that's logged into my home wifi network. However, I'm able to access www.facebook.com via Safari or Google Chrome on the same devices, and if I log into a different wifi network the app works fine. I'm also able to access Facebook through my desktop PC when it's connected to my home wifi network. I have two iPads - one with iOS6 and the other with iOS7. It doesn't seem to be a problem with my router since I can access Facebook normally through my home PC. When I try to access using the app on the iPads, I just get the spinning indicator in the upper left and nothing ever loads. I've tried resetting the network, re-booting the router, power cycling the ipad, turning wifi on and back off, etc. and nothing has worked.
Anyone have any ideas?

I am on Sprint 4G, running through a Cradlepoint router. My desktop PC is hard wired to the router and as I mentioned in my post I'm able to get on Facebook from the PC, and also from any laptops that are connected to the router via wifi. I'm also able to log into Facebook on the iPads through Safari or Google Chrome, just not with the app.

Firefox unable to load one specific website; seems to happen on other browsers too

I am unable to access the attached website - if I do access it - it is very slow and then I get an error msg (site busy etc);
have cleared cookies etc, cleared browser history as instructed on the help question about "error loading a webpage"

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Macbook pro unable to access websites through browsers

My macbook pro is unable to access websites through web browsers. Chrome & Safari. It is connected to the internet but for some reason I cannot access any webpages. Does anyone know what the cause of this may be and a fix? Thanks!

Solution may be found if you search in the "More Like This" section over in the right column.

Unable to access Workspace through Apache web server

Hi,
I have configured Hyperion 9.3.1. products in windows.
I am getting the following error message when trying to access Workspace through Apache web server(port 19000). But, able to access through Weblogic Application server(port 45000).
please assist me in resolving this issue.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.0.63 (Win32) mod_jk/1.2.8 Server at nasbydapp04 Port 19000
Thanks,
Siva

I re-configured the BIPlus components and even now, i am unable to access workspace through Apache web server.
But now, i am getting a different error
Error:
HTTP 404 - File not found
Internet Explorer
Can anyone help me in resolving this issue.
I have updated httpd.conf and HYSL-Weblogic.conf file in Apache server.

Unable to access Service Registry through VC 7.1 SP6

Hi,
I am unable to access the service registry through VC 7.1 SP6. I followed all the instructions detailed by Rudi. But keep getting an error message 'Could not receive classifications from UDDI server. Please change the UDDI server'.
Any help in resolving this issue would be appreciated.
Thanks,
PB.

Hi,
Can you please share the solution.
Regards,
Shahid.

Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls

Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts using the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls tab. Has anyone a fix for this problem? If you want to try it out, do the following?
Dial a number from your iPhone Keypad. After cutting the call, try to save the number you just dialled to your contacts by choosing the new contact option. You will see that you will not be able to key in the name of your new contact.

Works fine for me.
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Unable to access/load a specific webpage through gateway

Similar Messages

Maybe you are looking for