Unable to add printer after installing hp print drivers

Everytime I go to add printer i receive a message that the software for this printer is currently unavailable.
It appears to be defaulting to "apple" to find the drivers from HP. I have alreaded installed them, just cant tell the software where to find them. Any help is appreciated. Thanks.

Is your printer listed as compatible here -> http://support.apple.com/kb/HT3669#HP?
If so, you should be able to use the HP printer drivers here -> http://support.apple.com/kb/DL907.
If not listed, you'll need to contact HP support.
Good luck,
Clinton

Similar Messages

Unable to Print After Installing Adobe Acrobat Reader Upgrades.

. What software version of Abobe Acrobat Reader should be used for an HP PhotoSmart Plus printer? I currently have Adobe version 9.3 installed. I receive pop-up notices to install new Adobe Acrobat Reader software upgrades. I have installed the software upgrades and then my HP PhotoSmart Plus printer was unoperational. I deleted the Adobe software upgrades and my HP PhotoSmart Plus printer began to operate. I contacted HP technical support and was told there is no compatibility issues between Adobe Acrobat Reader and HP All-in-One Products. It might be a problem with the specific Adobe software upgrades. HP requested that I contact Adobe support for problem resolution. Has this problem ever happened to you? Any problem resolutions would be appreciated.

Hello there! Welcome to the forums @Oldchev
I understand you cannot print, after installing your Officejet 7410 All in One printer.
Please let me know the following, and I'll do my best to help!
What is the Operating System of the computer?
Have you tested hardware functionality (made copies)?
Have you tried printing from different programs?
Have you tried uninstalling and reinstalling the software?
What Firewalls and Anti-virus software are installed?
Have you tried disabling or uninstalling them?
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Unable to print after installing the new Quicktime upgrade

I can not print to my Epson printer after installing the new Quicktime upgrade on my PowerBook G4 (1.67 GHz, OS X Version 10.4.11). I have re-installed the driver from Epson (several times), and have safe booted and reset my permissions but it will not print. My printer is a Epson Stylus Photo R1800. When I print, it just gives me this message... "Looking for Printer 'EPSON Stylus Photo R1800' "

Latigna, welcome to Apple Discussions.
Here's a similar problem on the same Epson printer. http://discussions.apple.com/message.jspa?messageID=8928421
Also look at Troubleshooting printing issues in Mac OS X
http://docs.info.apple.com/article.html?artnum=106714
 Cheers, Tom

Officejet J6480 wont print after installing new comcast modem...

My Officejet J6480 wont print after installing new comcast modem...
I have deleted and reinstalled several times and it still wont work...
OS=10.9.2

https://www.youtube.com/watch?v=Rjd1ZqJ89N4
this video help solve the issue - i had to select infrastructure behavior on the advanced tab under Networking>Advances tab...

TS3147 I have been unable to add an HP Photosmart C4480 printer to my existing printer list using a USB connection. My current operating system is OS X version 10.9.1. It seems that software is available, but it doesn't work. Any suggestions?

I have been unable to add an HP Photosmart C4480 printer to my existing printer list using a USB connection. Software seems to be available and thought I had downloaded it, but doesn't work. Any suggestions?

Try deleting the printer, restarting, and trying software update again.
If that doesn't work, you can download the entire HP package here:
http://support.apple.com/kb/DL907

Continuous error beep/alarm after installing USB printer

Anyone have any experience with a continuous disabling/enabling of a USB device (in this case a printer) after installing on an X201 running Windows 7 Pro 64 bit? Printer (older HP 2420) installs as expected in Win 7 and test page prints as desired. Shortly thereafter the device seems to drop/readd continuously, and the only way to fix is to unplug the device.
Any assistance? Thanks.

I think I understand what you are trying to do now. How are you trying to install the printer software (download from website or software disc that came with the printer)?
Are you certain your USB cord is working?
Is your XP computer compatible with the Belkin switch?
Does your switch require software installation as well?
I think your error about the USB device not being recognized sounds more like a computer/Windows error message such as the Belkin device itself is not recognized by the XP computer because that is not the same words used when the printer is not recognized. I don't want to refer you back to Belkin so I will do my best to assist you but I can only hope I can fix this because this is what I call out-of-scope for me and do not have any formal training on your method. Maybe I can come up with a work-around instead. Answer my questions please while I think of perhaps another configuration of these devices more suitable for you.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

No sound after installing the latest drivers

After installing the latest drivers for X-fi xtrememusic, 2.8.003 I have no sound. Also my creative console is stuck in Entertainment Mode, it won't switch to any other mode. Help please?

Pheary wrote:
?My best guess is this is some bizarre driver/registry problem, since it mostly works perfect in XP, but barely at all in Vista.
Well, i don't have a solution for you, but if your soundcard + hub act like that even under xp after a few weeks i would suggest to get a replacement, cause there might be a hardware-error that causes your problem. A software/driver problem sounds very unlikely to me. That your having problems under Vista, isn't strange at all, cause there are still no final drivers relaesed for Vista and the support of the hub is rather barebone at the moment. Stormblade

Can't print to Networked Brother MFC-7420 Printer after installing 10.6

A few days ago my dad decided to finally take the plunge and let me upgrade his operating system from 10.5 to Snow Leopard 10.6.6 on his Imac.
Ever since then I have been unable to print to his Brother MFC-7420 printer.
The printer is connected to his Imac via USB and I connect to his printer through our Linksys Router on my laptop MacBook Pro. The downside about this setup is that his computer has to be physically on for me to be able to see and/or print to the printer.
When he was running 10.5 I was able to print to his printer with no problems but now that he is running 10.6 I can "see" the printer but when I sent a print job to it the Print Queue for the Brother on my screen says "Connecting to Printer" and never gets any further.
Printer Sharing is turned on as usual allowing "Everyone" on the network to print. I've tried removing and reinstalling the driver on my computer to no avail, I haven't tried doing the same to his computer.
A side note to make though, when my dad is running 10.5 on his machine and I try to add the Printer via my Print&Fax the system will automatically set the "Print Using" to the correct Brother MFC-7420 Cups" driver. However, if he is running 10.6 my system just comes up with the "Generic PostScript Printer".
Is there something I should do on his end or my end so that "my" computer can print again to his printer?
Any suggestions are appreciated, if any of you need more info feel free to post and I'll try to help. Thanks!

A couple of suggestions for you.
Ensure you have installed the MFC-7420 OS X 10.6 CUPS driver on both Mac's.
Open Print & Fax and select the Default view and select the shared printer. When your Print Using menu selects Generic Postscript, change this menu to 'Select printer software' and then search for the 7420 driver. According to Brother support the driver name will be listed as "MFC-7420 + CUPS".

Cannon LBP6000 printer cannot print after installing os x 10.8.3

After installing os x 10.8.3, the lbp6000 cannot print. I have downloaded and installed the latest driver from cannon. It showed copies are ready to print. But there is no actual printout. The print job just sit in the print que. Any ideas?

Working on the assumption that you had an older version of the Canon CAPT driver installed on this Mac before you installed 10.8, I suggest that you open Finder and trash the following files. Note that if you haven't done the reset that Greg has suggested, you will need to open Print & Scan and remove the current LBP6000 printer.
Mac HD > Library > Printers > Canon > CUPSCAPT (trash this entire folder)
Mac HD > Library > LaunchAgents > jp.co.canon.CUPSCAPT.BG.plist
Mac HD > Library > Caches > Canon > CUPSCAPT > CCPD > ccpd.conf
With the above files removed, restart your Mac and then run the CAPT v3.60 installer again. Then add the LBP6000 in Print & Scan and then see if you can print without error.

My hp4530 will not print after installing Yosemite

After installing Yosemite my printer will not connect because it is not "found" by my macbook pro. I re-installed the driver, but that hasn't worked. What else can I do? I've restarted, unplugged . . . all the obvious things haven't been successful.

Hi Bella,
This video helped me Printer/Scanner Fix With Yosemite No Matter What Brand. another thing you might want to do if that doesn't work is to add your printer by IP adress
-crazy

Why am i getting poor quality photo prints after installing lion using canon pixma 6120?

After installing Lion, I began experiencing poor quality photo prints on my Canon Pixma 6120 printer. Prior to Lion, my picture prints were all high quality. Now, anything black in the picture is faded.

Lion should not cause the blacks to print faded. The printer drivers used by Snow Leopard and Leopard are the same version as that used by Lion.
For starters I suggest you check that you have the latest version installed. This Apple KB article shows the MG6100 series has v10.51.2.0 as the latest version.
I also recommend you do a Nozzle test print. This can be executed from the MG6120 control panel or via the Printer Utilties window (via Print & Scan, select the printer and then open Options & Supplies and then select the Utilties tab).
If the nozzle test print is okay but the blacks still look faded when printing photos (note the printer has two black ink tanks - one for photos and one for text) then try a reset of the printing system. This will remove the MG6120 from the Print & Scan pane but not the supporting drivers. So you will only have to add the printer again.

HP Deskjet printer 4645 is not taking print after installing windows update

Iam using HP Deskjet 4645 printer at home. After installing updated drivers from HP it works very fine but after updating windows it doesnt print from microsoft office 2013 as wel as word pad. it prints well from notepad and e print. When I contacted HP
for this problem, they told me that problem is with microsoft windows 8.1 and I should contact Microsoft for the problem. Please help

HP service center is telling that the problem is not from HP side but it is from Microsoft windows 8.1.
Do they like the driver that it is using? Usually it is their driver but quite old. E.g. they probably didn't try to provide one specifically for W8.1 but it is their responsibility to do so; otherwise they are in effect saying that they do not
support W8.1 with that device.
Notice that your printer does not appear in this list?
HP Printers - Supported HP Printers for Windows 8
http://support.hp.com/us-en/document/c03168175
And that is W8. Who knows what all they stopped supporting for W8.1?
Robert Aldwinckle

Non working printer after installing Windows 8.1

Please HELP my printer no longer works since I installed Windows 8.1 HELP

Hi @Diane53,
Welcome to the HP Forums!
I understand that your printer does not work after installing Windows 8.1, and I am happy to help!
For further assistance, I will need to know some additional information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If the printer is able to make copies.
If the printer is connected, Wireless, Ethernet, or USB.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
In the meantime, please try the HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

DeskJet 5550 won't print after installing new black ink cartridge.

I recently got a new Dell computer with Windows Vista 64-bit OS. Printer was working fine until I replaced the black ink cartridge. It printed out the check page like normal after installing the cartridge but will not print anything else now. Not even a test page. I tried pulling the cartridge out and putting it back in. Tried unplugging the plugs on the back of the printer and plugging back in. Tried turning the printer off and back on. Also tried restarting the computer. I downloaded the HP Print Diagnostic Report and it could not find any problems. Could there be a problem with the ink cartridge itself?
This question was solved.
View Solution.

Well first I went and bought another black ink cartridge to rule out the cartridge being the problem. That was not it. So then I unplugged the printer and cleaned it thoroughly and plugged it back in. Still didn't work. So I went into the properties on my printer and started messing with the settings. FINALLY I FIXED IT! I clicked on the Advanced Tab and then clicked on Print Processor. I then changed it to WinPrint and retried the Print Test Page on the General Tab and it worked! Woo Hoo!

Web pages won't print after installing Explorer 9

Keep getting script error line 2107, There is no connection for this connection ID when I try to print a web page after installing latest Internet Explorer 9 (OS Windows 7) Please HELP!

Me too! On a HP LaserJet 1020, when I try to print from the Internet. I get error message for line 2107, but the message is different: Unexpected call to method or property access. I can print Word and Excel and other apps just fine. And, I know it is this printer, as I can print to another printer (from HP no less) just fine.
HP, are you out there? Help us!!!! I love my 1020, and don't want to give it up!
Forum members....Have you tried going back to an earlier version? If so, which do you recommend and how is it done?
Thanks!

Unable to add printer after installing hp print drivers

Similar Messages

Maybe you are looking for