Unable to burn DVDs because I renamed the drive the project and burn files are on. Please help.
I am unable to burn DVDs because, not thinking, I renamed the external drive the project is on. How do I fix the problem in DVD Studio Pro 4? I changed the name back on the drive, the files show as linked, but it won't burn. I've tried to refresh the assets, didn't help. Relink is not available to try. I tried to go to file/advanced burn & build, but it was not available either. I'm new to all this so am very afraid to trash the preferences, not knowing if I'm going to do other harm.
Thanks,
Trish C
Reimport the files and drop them into the project.
Your links should work.
x
Similar Messages
-
i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!
Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked
-
As I was installing the Windows 7 on my Imacwith the bootcamp and stated how I wanted to divide the drive I put 160, but I want to add more space because of the adobe software it will not install two of them, so how can I add more on the drive space to from 160 to 250? please help thank you.
I'm not sure this is what you're looking for, but it might help:
"If you made the Windows partition too small
First, back up all the information on your Windows partition. Then run Boot Camp
Assistant to restore your disk to a single volume. Restart your computer and use Boot
Camp Assistant to partition the disk again and reinstall Windows. Don’t forget to install
the Boot Camp drivers after installing Windows."
(from Bootcamp Assistant Manual see pg 22) -
i want to copy my data to my iPhone via itools
the error occured is
unable to ascertain the compatibility of itunes
my itools and itunes both are updated.
please helpThe following fix apparently worked for some: https://www.youtube.com/watch?v=yEgm8m__Ipg
-
trying to set up icloud on my iphone5 and it keeps saying that its unable to complete the back up.. i have it running on my ipad just fine.. please help. i followed all the steps in the tutorial.. thank you
Hi DesCoop,
You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
Sorry.
GB -
All of a sudden, DVD Studio Pro 4.0.3. doesn't like any of my m2v files created by Compressor 2.0.1
these are the same m2v files I imported and burned into DVDs a couple months ago...and any new m2v files I create with Compressor...cause DVD Studio Pro to crash
DVD Studio Pro 4.0.3 will import old m2v files that I created a couple years ago using DVD Studio Pro 2 - and any new audio files created with Compressor and quicktime files from Final Cut Pro 5.
I have 1.5 GB of RAM...my drives are not too full...this was all working fine until recently and I can't see what has changed.You can't download for the upgrade 4.1 is the Universal Binary and only part of the entire studio
-
Slow access when opening XLS or DOC files over the network but XLSX and DOCX files are fast
I am working with a small office that has 3 Windows 7 Pro PC's. Two of these PC's have shared folders that hold Word and Excel files and all 3 of the PC's have drives mapped to these shared folders. When browsing these mapped drive in Windows
Explorer and double-clicking a file 1 of the computers takes about 30-50 seconds to open any file with a .doc or .xls extension. It opens .docx and .xlsx files in a couple seconds though, it also open PDF files very quickly. The other 2 PC's
have no trouble any any type of file. I have tried many things over the last couple weeks to get this fixed. I have added the file locations as 'trusted locations' in the Trust Center and added a couple Registry tweaks to the SMB/ lanman workstation
and server. 2 PC's are running Office Pro 2010 SP2 and the other is Office Pro 2013, the one having the slow access is running Office 2010. Has anyone come across this problem and have any advice??Try:
Open My Computer.
Open the Tools menu and choose Folder Options...
Select the File Types tab.
Select the extension (for example DOC, or XLS) of the file that is slow to open.
In the Details section, click [Advanced], and another dialog box will open.
In the Actions section, click Open then click [Edit...], and another dialog box will open.
http://windowssecrets.com/forums/showthread.php/149672-10-9-2012-Updates-and-very-slow-opening-of-Office-files
KR -
purchased a ipad mini3 keep getting messege Safari could not open the page because the server stopped responding.
Is this a wi-fi iPad? Is it connected to wi-fi? It sounds as if you're not connected to the Internet.
-
It would respring after typing in one letter at the spotlight search bar...how do I get rid of this...I have noticed this change about 1 day ago
You will need to look elsewhere
Jaigosh00 wrote:
... I think my cousin jailbroke the iPad without my knowing because there is a weird icon that says Cydia...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743 -
Hey Everyone!
Does anyone know any code so that i can filter by year in the blog feature in business catalyst? right now i can only do it by month.
Help fast would be greatly appreaciated!
Thanks!
JamesHi James,
Are you talking about filtering so it has blog posted filtered yearly?
If so I suggest creating tags for the "years" then assigning blog post accordingly.
Once completed it'll appear like this on the front-end within your overall blog layout.
Hope this helps!
-Sidney -
My older I-MAC gives me a grey screen and flashes a question mark and smiling FINDER face inside a FILE icon. Then the fan begins to run and becomes very loud...and thats as far as it will let me go.
See KB Articles: http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or kernel panic when computer starts
http://docs.info.apple.com/article.html?artnum=31355 Mac OS: Flashing Globe When Computer Turns On or A folder that has an alternating flashing question mark
http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)). -
Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSCThank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc -
I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seems to be checked.
Also the read only box is checked and when I uncheck it seems ok but if I check again it is still checked.Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
I can not burn a cd in itnes. When I open itunes it tells me the dirvers for importing and burning cds & dvds are missing. It tells me to reinstall itunes. I have done this and it does not help. How can I solve this problem?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change.
Maybe you are looking for
-
Firefox stops responding after file download
After I download a file, Firefox stops responding and I have to wait for around 10 seconds before I can use it again. This also happens when I'm using "Download them all"
-
I already have an Apple ID that works, but for some reason my iPod Touch logged me out of the mail app. I want to log back in, but when I try to log in, it says "this account has already been added". The app will only let me sign up for a new ID, but
-
Problem with crystal reports chart.
If decimal separate is a space which occurs in some countries, then the value of the bar in the corresponding graph sometimes is shown in two lines. For example 12345, if it is written as 12 345, then sometime in the graph it is shown as 12 in one li
-
Must reduce size of JScrollPane to see Scrollbar
when I put a JScrollPane in a JPanel I must reduce the size of the JScrollPane to see the JScrollBar any Help is welcomed Thank U
-
Sending Groups Back to their originating OU
I am setting up to export group changes back to AD. My question is: Without defining an OU in the sync rule will group updates automatically go to the originating OU? Since I have defined the containers to include in the ADMA I would assume this is k