Unable to complete setup in WRT54G2

Checked multiple times and still get ERROR 322.
All connections are valid. Also, rebooted each (modem, computer, and roter).
Any advice would be appreciated.
Solved!
Go to Solution.

I received assistance from the chat online support on here. They sent me the instructions on how to manual configure the unit. It worked fine alright, but I just wish it worked right out of the box thats all. Being that this was my first wireless purchase, I wanted a smoother process.

Similar Messages

I am unable to complete setup after updating iphone 3GS to IOS 6.16.

I have been using an iPhone 3GS in an art gallery for processing credit cards via WIFI. I am not using the phone on cellular and it has no SIM card. The other day I received a message about a "mandatory software update" so I proceeded to do the update. When I got back to the phone, it showed a screen that said IOS 6 and the "slide to set up" when I did that, it said I had to connect to iTunes. I was unable to connect to a computer and the device was not able to connect to the internet for WIFI. When I tried to connect to a computer and iTunes, the phone was not recognized by the computer. The phone is connected to the computer right now and is cycling between a black screen and the apple icon. I won't go anywhere else.
I have tried the two-button reset and it does not work.
It seems that the update has bricked the phone. Is there anything I can do to revive it?

Oh ...
That makes it difficult. My new (working) phone is a 4S and the SIM card does not fit. The old SIM card is in the 3GS but as far as I know it was was deactivated.
But it seems that with other updates over the last couple of years this was not necessary and my partner went through the same update with her 3GS with no problems.
Should I go to my AT&T dealer and purchase a new SIM card? Is there still a new one available?

Unable to complete setup for Premiere Elements 10 on Mac Book Pro, OSX 10.7.5

Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 7 error(s), 8 warning(s)
WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW034: Warning: {52411D2C-81DD-442F-81C7-D867F6D73491} Photoshop Camera Raw for Elements 10 6.4.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW034: Warning: {52411D2C-81DD-442F-81C7-D867F6D73491} Photoshop Camera Raw for Elements 10 6.4.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed

Check this link, this may help.
http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html

My iphone 6 plus after updating to IOS 8.2 the touch id doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' .

my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.

Hi Giannis,
If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
Use Touch ID on iPhone and iPad - Apple Support
Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

IPhone 5s Unable to complete Touch ID setup. Please go back and try again.

Hi, I have an iPhone 5s and I recently updated to iOS 8. When I was using iOS 7.1.2 the touch ID option was gone. The only option that I have there is passcode it seems like Im only using an iPhone 5 because of that. Anyhow, I updated it to iOS 8 last September 17 and the Touch ID option is back. However, when I tried to add a fingerprint or activate touch ID, I keep on receiving "Failed, Unable to complete Touch ID Setup. Please go back and try again." I already tried several times but the issue is still the same. any response would be pretty much appreciated.
- Many Thanks!

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Make sure the sensor is clean and dry > Use Touch ID on iPhone and iPad

E72 - "Unable to Complete Command"

Dear all - I just bought a new e72. Waited months for it, and now i am horribly disappointed. It syncs okay with Microsoft Outlook, mail, calendar, contacts. But, everytime i try to compose a new message, or reply, or forward, the message "Unable to Complete Command" pops out.
Can somebody help me please? I am running Microsoft Exchange as mail server. Thanks.

I have a SOLUTION!!!
Called NOKIA support and they were ZERO help. Only thing they could do for me was to reset my Nokia Messaging service from Expired to active again.
So to summarise:
I had the problem that I could not send email (either create, reply or forward) from my E72 connected to my Google Apps Premier Account via Mail for Exchange. I wanted to have my calendar and contacts synchronised and PUSH email on the phone.
The other symptom of the problem was that I could only see my inbox and my deleted items folders when I tried to select a different folder. There were no sent items, outbox or drafts folder.
The solution was:
reactivate my Nokia Messaging service online - this had expired
check the settings on your Nokia Messaging service to make sure you have set-up the email account you would like to have push email for
create a new mail account using Mail for Exchange on the phone. Use the settings as specified by Google, i.e. the server is m.google.com with your username, password etc.- make sure you select that you want to sync calendar and contacts via MfE
switch OFF the email synchronisation with MfE by going to the settings while in the email inbox, selecting settings and disable the email synchronisation
create a new email account using the Gmail option in email setup. This will set up an IMAP account that will connect using Nokia Messaging and deliver push email. The most important thing is that this will create another email inbox THAT WORKS!
Now I have push email from the IMAP/Nokia Messaging service and sync for calendar and contacts from the MfE service. A little clumsy, but it works and thats the main thing!
Enjoy!

Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?

Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

Time machine error unable to complete backup. an error occured

Hi All,
I have a question: i try to set up timemachine. Everything seems to work. but i cant get the first backup, it gives me the follow error: time machine error unable to complete backup. an error occured while copying files to the backup volume
My setup: an internet wireless router with a ethernet connection. On the ethernet connection i have a FreeCom Network Drive.
The Freecom Network drive have fat32, i think i cant format the netwerk drive cause there is some software on it, that give me access to my network drive via lan.
I configure that i can have acces to my netwerk drive. I can setup it from Time Machine, and Time Machine starts to put data on my network drive. After a while (mostly between 500mb-1,2 GB) it gives me the follow error: time machine error unable to complete backup. an error occured while copying files to the backup volume.
What to do???

Hi Norm,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
(Repair both Drives)
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Time Machine: Latest Backup: Failed (Unable to complete backup)

Unable to complete backup. An error occurred while copying files to the backup volume.
some messages from the console log:
6/22/08 6:15:23 kernel disk3s2: 0x23 (UNDEFINED).
6/22/08 6:15:25 kernel HFS resolvelink: can't find iNode87587
6/22/08 6:15:26 kernel HFS resolvelink: can't find dir_487832
6/22/08 6:15:54 /System/Library/CoreServices/backupd[61444] No pre-backup thinning needed: 80.00 GB requested (including padding), 300.19 GB available
6/22/08 6:15:54 /System/Library/CoreServices/backupd[61444] Waiting for index to be ready (915 > 0)
6/22/08 6:18:59 mds[39] (Error) DiskStore: Unable to create/find index location
6/22/08 7:21:27 kernel AirPort: Roam (Beacons Lost)
6/22/08 7:21:40 /System/Library/CoreServices/backupd[61444] Waiting for index to be ready (915 > 0)
6/22/08 7:21:42 kernel AirPort: Roam (Beacons Lost)
6/22/08 8:10:00 com.apple.launchd[1] (0x10d550.cron[62330]) Could not setup Mach task special port 9: (os/kern) no access
Any ideas?

robrobrobrob wrote:
Aug 14 18:33:28 iMac mds[44]: (Error) DiskStore: Unable to create/find index location
While you got the same type of message as while(fork()) it's not clear to me that they represent the same underlying problem.
In your case the Time Capsule and the actual Backup seem to mount OK as seen here:
Aug 14 18:33:20 Robert-Schattners-iMac /System/Library/CoreServices/backupd[301]: Network volume mounted at: /Volumes/Time Capsule
Aug 14 18:33:25 iMac /System/Library/CoreServices/backupd[301]: Disk image /Volumes/Time Capsule/ iMac_001ff3543f94.sparsebundle mounted at: /Volumes/Backup of iMac
Aug 14 18:33:25 iMac /System/Library/CoreServices/backupd[301]: Backing up to: /Volumes/Backup of iMac/Backups.backupdb
What follows indicates to me that the backup proceeded. Once it decides to do a deep traversal,it take s Loooonng time.
Aug 14 18:33:31 iMac /System/Library/CoreServices/backupd[301]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
What happened after this?

I am unable to complete Synching with my IPhone 4S as it tells me reason is that Apps are unable to be determined on my phone however all of them Purchased from I Tunes. Can someone assist me with a Solution

I am unable to complete Synching with my IPhone 4S as it tells me reason is that Apps are unable to be determined on my phone however all of them Purchased from I Tunes. Can someone assist me with a Solution

You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others.

Unable to complete installation of imo

unable to complete installation of imo
it givs pending ...

Hi,
This :- ?
https://imo.im/register
Where did you download it from ?
If it was not the Appe Store what is the setting in System Preferences > Security about downloads from other sites ?
8:29 pm Sunday; April 12, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Mainstage Was unable to complete the download world music loops

Ok, so I have bought Mainstage 2.2 from the app Store, and have almost downloaded all the additional content.
However, the only pack that will not complete it the World Music Apple Loops.
I immediately get the message, Mainstage was unable to complete the download.
There is no attempt to download this pack.
Any suggestions? I don't really want to uninstall and download 20Gb again.
Cheers

More disk space than I can shake a stick at, very stable internet connection, speedtest shows ping <18ms etc. The main reason for purchasing mainstage is for the loops and instruments, at £20 that's a bargain, but only if I can get the application to download the last package.
Wireshark shows that the server is rejecting the request from MainStage as a HTTP/1.1 416 Requested Range Not Satisfiable.
Looks like either a MainStage Application issue requesting the HTTP GET command or the Server not servicing that request.
Apple over to you!

Unable to COMPLETE install of iPhoto 09 on Power PC G4 - specs OK

I have a very old PowerPc G4 (512RAM), 1,25Ghz, OS X 10.5.8 which my kids use for their photos.
I am unable to complete the install of iPhoto 09 from the iLife 09 update disc I purchased in the late 2000's.
The disc works perfectly and I get as far as slecting the drive on which I want to install iPhoto. I hit the install button and the beachball appears for 5 seconds or so, then diappears and the install stops. I can hit install again and the process repeats itself but it is not updating the program.
The reason for doing this is to transfer a my iPhoto 09 library over to this machine instead of re-importing the photos and having to recreate the albums / events.
iLife 08 is installed and working.
Thanks in advance for any help.

Try using Pacifist to install iPhoto and it's supporting files from the iLife 09 disk. I would move your current iPhoto application to the Desktop until you know the install was successful and it operates as expected.
OT

To "update software" and when I restarted my computer I got the message unable to complete. Now when I restart my computer it is shows the apple and a continuously turning time gear.

I responded to install new software message and was asked to restart--I did that--went to lunch and when I returned my screen showed the message that said, "unable to complete update for unknown reason" or something to that regard-and asked me to restart. I tried to restart and now see the apple but the time scroll is in an unending loop and my computer will not boot.-I recently installed snow leopard in order to be able to sync my mobile me accounts--since then my computer runs hot. Not sure if that has anything to do with current issue.

You will need to reinstall Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the appropriate Combo Updater to return to the Snow Leopard version you prefer from support.apple.com/downloads/.

We are sorry, but we are unable to complete your request.•The Office 2007 Product Key provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Unable to complete setup in WRT54G2

Similar Messages

Maybe you are looking for