Unable to configure site mailbox at the sub site level and new site collections created

hi all,
i am trying to get the site mailbox up in my  SP 2013 env's sub sites and site collections.
i am able to get the site mailbox created on root site collection level ONLY.
but i am getting the error  code 8 when i try to add the site mail box at the sub site level and the newly created site collections on the same web appln.
error code 8:
An error occurred during the OAuth handshake between SharePoint and Exchange. This is typically caused by server to server configuration issues, such as a realm value mismatch on either side, certificate issues for Exchange or SharePoint, etc. Review certificates
and attempt to establish or reestablish trust.
so is it possible to create site mailbox at the sub site level [ team site] ?
and  what are the  steps i needed to perform on exchange server level.

hi all,
i am trying to get the site mailbox up in my  SP 2013 env's sub sites and site collections.
i am able to get the site mailbox created on root site collection level ONLY.
but i am getting the error  code 8 when i try to add the site mail box at the sub site level and the newly created site collections on the same web appln.
error code 8:
An error occurred during the OAuth handshake between SharePoint and Exchange. This is typically caused by server to server configuration issues, such as a realm value mismatch on either side, certificate issues for Exchange or SharePoint, etc. Review certificates
and attempt to establish or reestablish trust.
so is it possible to create site mailbox at the sub site level [ team site] ?
and  what are the  steps i needed to perform on exchange server level.

Similar Messages

  • I dont recall when I have been more frustrated....  the "loops" I am in on the web for support are endless.  After downloading Yosemite on my Mac my CS6 no longer works.  On your support web site you state the following for downloading and installing prev

    I dont recall when I have been more frustrated....  the "loops" I am in on the web for support are endless.  After downloading Yosemite on my Mac my CS6 no longer works.  On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required.  When I attempted to open it to download "Previous Versions" I could not.  I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated....  Rich@

    When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize.  Please down load Adobe Support Advisor to detect the problem"  I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available.  I then go to that site and am told to go to CC for desktop apps, that requires me to download CC...  I don't want CC.. just want to have my CS6 PS work again....  so frustrating...

  • I am unable to re-install itunes. The installer starts ok and then indicates that it can not access a network !!

    I am unable to re-install itunes. The installer starts ok and then indicates that it can not access a network !!  I have tried to uninstall but get the sme error message. I have used 3rd party software to uninstal but still have no joy. My pc is running Vista.
    Can you anyone offer a working solution ?

    Many thanks.
    Let's try the fixit from the following Microsoft document with that one:
    Fix problems with programs that can't be installed or uninstalled

  • When I have turned on my MacBook Pro it just sits there at the intial apple screen and doesnt proceed to the screen where you can sign on

    When I have turned on my MacBook Pro it just sits there at the intial apple screen and doesnt proceed to the screen where you can sign on - any ideas

    when you restart the machine, make sure you uncheck the "reopen windows" check box, and see if that helps.

  • Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

    Question
    Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

    and now, when i tried to check again my network preference below the airport tab is showing a message that
    "my airport does not have an IP address and cannot connect to the internet!"
    then after seconds it will goes back to the first message that
    "airport has the self assigned IP address etc....."
    i don't know whats going on now!
    airport tab is not showing green color anyway! i'ts always in yellow!
    i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

  • I lost the ability to order and hide site columns if i use custom content type with a custom Create Form

    I have a team site collection and I want to add a new App of type Issue Tracking list. so I did the following:-
    From the site collection I created a new App of type issue tracking.
    Then from the site collection I created a new Content type named “CustomIssue” which has its parent as “Issue” content type.
    I went to the Issue tracking list and I changed the default content type from Issue , to the new “CustomeIssue” content type.
    I open the site collection using SP designer and I created a new Create form for my Issue tracking list based on the "CustomIssue" content type and I select to have the Create form as the default form when creating an item.
    Everything till this point worked well. But when I open the “customIssue” content type , and I re-order the columns and I hide some columns, this was not reflected inside the custom Create form …
    although when using the default content type and the default create form you can control the order of the fields and to specify if certain fields hold be hidden inside the Create form.. so can anyone advice on this please?

    Hi,
    According to your post, my understanding is that you lost the ability to order and hide site columns if i use custom content type with a custom Create Form.
    I try to reproduce the issue, the result is the same as yours.
    As a workaround, if I modify the custom content type form the site setting, and then change the NewForm as the default form, it will change the column orders.
    However, if I use the new created form as the default form, it will remain the original orders.
    I recommend that you modify the custom content type form the site setting, and then reset the NewForm as the default form.
    The result is as below:
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support
    ok thanks for the explanation ,, but what if i want to change the order and hidde some fields in the future ,, do i have to chnage the defualt create form again ...

  • Got a MacBook with 10.5.8  I am anable to burn cds, dvds, and dl dvds.  Everything worked before I reformatted my computer but now it comes up with error messages like unable to communicate or something about the laser power levels.  Help! Anyway to check

    Got a MacBook with 10.5.8  I am anable to burn cds, dvds, and dl dvds.  Everything worked before I reformatted my computer but now it comes up with error messages like unable to communicate or something about the laser power levels.  Help! Anyway to check to see what is going on?

    Hi I am having the identical problem with my 24" intel iMac 2007..... Did you ever figure out what the problem was? I'm on round 3 now and with a completely blank grey screen and it won't start up from the disk 1.. I also have diskwarrior and techtool pro as well as the osx leopard and snow leopard disk... The HD is new.. Replaced by apple 3 months ago.. Don't know the cause the first time this happened about 9 months ago.. 2nd time, 6 months ago it never rebooted from the office for mac 2008 critical update... Did a clean install after backing up to TC... Took it to apple replaced HD even though it appeared ok, they checked all hardware and I ran techtool pro daily ever since. Last week software update had several updates avail. Office for mac being one of them.. I updated and have never booted since.. . I swear to never ever use another Microsoft product as long as I live if I can just fix this once more... Help me please

  • Our Century Link Modem/Router supplied at set up, has poor range. It is in the kitchen ( main level ) and won't reach our studio fully at 30-40ft away. Will setting up my time capsule i the studio improve this signal?

    Our Century Link Modem/Router supplied at set up, has poor range. It is in the kitchen ( main level ) and won't reach our studio fully at 30-40ft away. Will setting up my time capsule in the studio improve this signal? If not, what can I do!???

    Will setting up my time capsule in the studio improve this signal?
    Yes, if the Time Capsule remains connected to your Century Link modem/router using a permanent, wired Ethernet cable connection.
    Any other option will involve the purchase of more hardware.
    One option would be to keep the Time Capsule connected to the modem/router using a short Ethernet cable, and configure the Time Capsule to provide a wireless network.  Add an AirPort Express about half way between the kitchen and the studio to wirelessly extend the signal from the Time Capsule to provide a much stronger signal in the studio.
    Another option might be to use a wireless repeater that is compatible with the modem/router. Century Link might have a solution, or be able to recommend a compatible device for that purpose.

  • When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

    I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
    Below is my iMac settings.

    Do you have a back up?
    If not you're into using file recovery software like  File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
    There are other such apps. Search on Macupdate or the App Store

  • AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't lool right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?

    AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't look right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?

    Google Toolbar Options, in the Search tab, make sure that '''Enable the Google new tab page''' is check-marked. If that doesn't fix it for you, see this for support information about the Google Toolbar. <br />
    [http://www.google.com/support/toolbar/?hl=en] <br />
    Or visit the Google Toolbar forum. <br />
    [http://www.google.com/support/forum/p/Toolbar?hl=en]
    As far as your UserAgent showing Firefox 3.0.11, see this: <br />
    https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    You might want to consider getting rid of that '''desktopsmiley''' program that has messed up your UserAgent, it is known as Malware.

  • If you create a 3 level deep site heirarchy (with the first two levels based on the document centre template) the sharepoint OOTB breadcrumbs break

    if you create a site collection with document center as the template, then create another document center site (as a subsite) underneath it. Then create a team site (as a subsite) in this document center site. So now you have a 3 level deep site heiarchy
    with 2 levels of doc center followed by a teamsite.
    Note that the breadcrumb (when I say breadcrumb I mean the drop down folder button which shows the heirachy) shown on the teamsite skips the middle level doc center.
    I have replicated this bug in production and in my test server.  Has anyone run into this before?  This must be something peculiar with the Doc Center template.  If I do the same thing but I make the middle level a team site I do NOT have
    this problem
    krd

    Hi,
    Per my test, it seems that if the second level uses a different category template except the Collaboration templates, the site will not show on the breadcrumb.
    No matter if the first level uses any template, when we view the subsite which uses the Collaboration templates, all the subsites which uses a different category template above will not show in the breadcrumb.
    You can create your own breadcrumb using code.
    http://blog.mastykarz.nl/building-breadcrumbs-sharepoint-2010/
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Having trouble transferring itunes library to an external hard drive.  All of my music is in the main ITUNES library and every site and answer I get says tranfer my library/user name/ da da da da da.... I am not familiar with this-need a simple way-thx

    HELP!   I have looked at video sites, looked on here, to no avail.   Please dont talk negatively about my question (as I have seen some pretty mean responses to topics )   I am trying to copy my itunes music to an external hard drive.  Here is my situation:  All of my music is in the main ITUNES location.  I  have been told to save the "user library".  I really need an elementary step by step way.  I plan to visit the library in town tomorrow to get a book but worried because my computer is having issues  TONIGHT.  Thanks for any help....  This is so helpful to know there may be help out there.

    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
    To see your iTunes folder click on the Music folder icon in your Finder sidebar.

  • Delete the show side bar and top sites from Safari

    I have never nor will I ever use the tabs for top sites and show sidebar which appear on Safari. How do I delete them from the tab bar?

    Robert
    aha! NOT tab bar BUT Bookmarks Bar! I guessed the TOOL bar at first. BOOKMARKS!
    In the main menu bar choose [Help] > Safari Help
    search " deleting bookmarks " > open that file
    *in my version, it says "
    You can’t remove the bookmarks bar or Bookmarks menu from the sidebar. You can’t remove History and All RSS Feeds, but you can delete individual bookmarks within them.
    To remove Address Book and Bonjour from the sidebar, open the Bookmarks pane of Safari preferences and deselect them."
    key to the bold statement is that one of the icons that you wish to disappear, may not not be removable. It is certain the 'Open Book' is there to stay.
    I have personalized my Safari so much that I don't find your "Top Sites" folder or icon - If I removed it in the Bookmarks window, it would naturally disappear from the bookmarks toolbar - if you see it in the list, remove it and I'll bet it magically disappears from the Bookmarks Bar.
    let us know
    CCC

  • How to update site icons in the bookmarks without going to every site. This option is available in Maxthon

    when I install fresh and sync my new firefox, I have 100's of bookmarks in categories. I would like to see an option to update site icons where firefox goes and get the icons for all my bookmarks.
    This option is available in Maxthon
    Right now I have to visit every site to have the icon show up.
    maybe there is an addon

    hello daronwade, in order to automatically add the favicons to your synced bookmarks you can try to use the following extension: https://addons.mozilla.org/firefox/addon/faviconreloader/
    after installing the addon you have to initiate the scan for favicons once: press the alt-key to show the menu bar, go to the bookmarks and select the option to reload the favicons.

  • Running 3.6.23 on Ubuntu 10.10. worked fine on Nationwide's site last week. Now they have a new site and there are many problems. Can I make the browser tell their site its on windows not linux?

    changes since new site running All of which worked fine before:
    clicking back button now asks if I really want to leave the current page and logs me out.
    They report my browser is not supported.
    Times out even though I am actively using the site.
    When I try to send a secure message it wipes out what I am still typing and says it is not the right sort of thing to put in a message.

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Maybe you are looking for

  • Moving root filesystem to another hard drive

    Hi everyone, I've been using Arch Linux for a few months now and it is by far my favorite Linux distribution. I currently have Arch on an old Pentium III, with a whopping 20 GB IDE hard drive. I'm building a new computer, and want to use a larger 160

  • How to make Portal Form Submit go back to portal page?

    I'm using a form inside a Dynamic Page portlet so that I can have portal page parameters feed into the form. This works just fine. However, when I submit a new record in my form, the page navigates to a page with just my Portal Form and not the Porta

  • Since yesterday clicking on a link in an email message firefox doesn't open a new tab with that particular website.

    I am using Firefox 3.6.13 on a 2009 Mac Pro computer (OSX 10.6.6). Up until yesterday when I clicked on a link in an email message Firefox opened a new tab and switched to that particular website. Since yesterday Firefox doesn't do that. I have Firef

  • ISync and third party software

    Having recently purchased a shiny new Intel Macbook (running Tiger 10.4.8), I was keen to get ISync (2.3) working with my Nokia N80. As usual I've picked a model that isn't supported by ISync. Bah! So to cut some corners until ISync is updated I have

  • Problem to update to LR 5.4

    When tying to extract downloaded update for LR 5.4 I get errors: "control enough space on your computer and writing rights to the folder". Either is not relevant though. When trying to run the exe-file (ignoring the previous error) I get "Error readi