Unable to connect via wrt54gx2 wireless

Had this router for a couple of years - was working fine last time I was on, about 2 weeks ago.  Using with an HP with Vista, via a broadband.  LAN connection works fine. Wireless Drivers are still there, and I'm able to view my network in the Manage Wireless Connections screen. However,  I am unable to see this connection as an option via the Connect to a Network screen, though I am able to see other wireless connections in the neighborhood.  I have turned off the power to the router multiple times, unplugged the internet cable as well, rebooted my laptop, etc. Any other ideas would be appreciated.

Try to readjust the wireless settings of the router...Open the linksys GUI by typing 192.168.1.1 in the address bar..Under the Wireless tab,Set the Wireless channel to 11-2.462GHz...Change the SSID(network name) and click on save settings.Check your Security Key under Wireless Security tab...Under the Advanced Wireless Settings...Change the Beacon Interval to 75, Fragmentation Threshold to 2304,RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

  • I'm unable to connect to my wireless network

    I am unable to connect to my wireless network on my iphone 4.  It worked previously. My husband has no problem with his iphone connecting.

    Same here. Upgraded 2 separate iPhone 4 to iOS 5 and now both get an error that say "incorrect password" when trying to connect. iPad 1 upgraded to iOS5 and all 3 macs connect fine using same password. (Router is Apple Airport base station running 7.5.2)

  • Macbook air is unable to connect on hidden wireless network

    Dear users and support,
    I have just bought my macbook air with lion os already installed, but I am unable to connect to hidden wireless network. Is there any trick to fix it? even though I am typing the name and password it's unable to login.
    Please advice.
    tks,

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Reset the System Management Controller.

  • Unable to connect to any wireless internet

    laptop not supported any dongal to connect internet where as device connected other laptop. If i connect with Hot s[pot then its connected so request you to help on this & suggest what should i do.  shoud i format ?

    Hello @James0007,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook computer is unable to connect to any wireless network. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Unable to connect via wireless, printer is online.

    I am using a Photosmart plus 209a via wireless.  There are 3 notebooks connected. 2 will print but my Dell Studio (Win 7 Pro) will not. It was previously connected but now unable to connect.  I have uninstalled all components using level 3 twice. Have used the Print/Scan tool.  Downloaded the full SW package and the Basic driver SW. I process a job and it gets to the spooler and then "print job failed".  I can view the control panel via IP address. I can view network settings and print wireless test page through HP Solution Center.  Why am I unable to connect?  I was able to use via USB but this is not an option.

    It sounds like there is something different on the Dell Studio since it works from two other computers on the same network as the Dell Studio.  It also sounds like you are able to access the EWS of the printer by using its IP address.
    Are there any other errors messages regarding the printer?  If so, what are they?
    Is there a third party firewall installed (e.g. Norton, Kasperksy, BitDefender, etc.)?
    Is this Windows 7 Professional 32bit or 64bit?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Unable to connect to home wireless network with my iPod touch

    I've had my iTouch for several months now and I'm still not able to connect to my wireless network at home. I've tried the resets and other suggestions I've found in the discussion groups but nothing has worked.
    I have an older Netgear Router MR814v2 and it is unsecured. It is attached to my old desktop, HP Pavilion running Windows ME, which is not able to run the itunes software. My HP laptop is where my iTouch and iTunes software is installed.
    The iTouch displays my network with good signal strength, but when I try to connect I get the "unable to join the network "NETGEAR".
    Going to my router, it does not recognize my iTouch as an attached device. Why is that and what am I missing?
    Thank you for all suggestions and your help.

    I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

  • Unable to connect via "Data Transfer" Mode On N95 ...

    Its been happening for a little while now. When i plug the USB cable in, it asks if i wanna connect via PC Suite, Data Transfer etc
    When i click Data Transfer it says the following:
    "Unable to activate Data Transfer Mode. Mass Memory is in use by another application"
    Does anyone know the fix for this problem?
    Many thanks
    Message Edited by tiff777 on 06-Nov-2008 07:56 PM
    Message Edited by tiff777 on 06-Nov-2008 07:57 PM

    Hi There
    Im not sure this would work for you all but i came accross this discussion after suffering the same problem and after pulling my hair out i finally solved it and thought it was only fair i posted how.
    I had tried all options on here apart from deleteing everything off my memory card ( i wasn't keen on this option ) i checked the running apps and it just showed that standby was running,
    So i thought i would try uninstalling recently installed item one by one, i had recently installed some  software called CALL RECORDER  and although it was not showing up that it was running it was in the background after deleting this the problem was solved ,
    So try and think if there are any apps that you have installed that may be running in the background but not showing up , i would advise deleting these one by one as i did and if it still doesnt work you can reinstall it ,
    hope this helps
    BUT EVEN AFTER ALL THIS I STILL LOVE MY N95 8GB !!!!!!!!!!!!!!!!!!!!!!!

  • Unable to connect to printer wirelessly

    I have an Hp Officejet 7612
    My computer is running Windows 7 64-bit with Service Pack 1
    I am not able to connect to my printer wirelessly.
    When trying to add printer, after selecting "Add network, wireless, or Bluetooth printer", my computer is not able to see printer while serching. I try to add printer manually by typing in IP address or hostname (either one), an error message occurs.
    Printer wifi is on and connected to the same network as the computer.
    I have restored network settings to default in order to try and fix issue.
    I've tried this on a number of other computers, some running Windows 8.
    I have disabled computer firewalls and computers still can't find printer.
    It is as if the printer is...invisible!

    Hey @chriswalkenspal ,
    Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
    I understand you have your printer and computer connected to the same network and you are unable to connect your computer to your printer.
    You say you are trying to add a printer, but have you installed the printer using the device driver CD or online driver  download tool ? If you haven't you need to do so and you won't have to add a printer because that is all done in the installation.
    If you need the instructions on how to do so, let me know and I'll be more than happy to show you how to do download it.
    Have a great day and let me know what else I can do for you.
    I worked for HP.

  • Unable to connect via airport all of a sudden

    Unable to connect to the internet via airport all of a sudden. No changes to modem or router or network settings of macbook etc. Other devices in the house can connect just fine, but called cable support to verify and all is fine on the DSL end. Cannot download updates w/o internet connectivity. Have tried going thru the motions of setting up airport again and cannot get past the DHCP (can't remember exact letters at the moment) as my carrier is not a PPoE. Aside from reinstalling the OS to see if that will fix, does anyone else have any suggestions? Apparently this happens more often than I thought based upon other posts. Thank you!

    Thank you for your help and it was a big help. I removed Norton software firewall, and firefox began to work. I thank you for your help and suggestion.
    Dennis

  • Unable to connect netgear DG834G wireless to macbook

    Hi
    I am unable to connect the Netgear Router DG834G wireless to my Macbook. It works fine through the ethernet cable but when i try and connect wireless it says invalid password?

    Hi
    Changing your ISP won't fix this problem.  There is one last thing that's worth a try....
    Creating a new "Location":
    System Preferences > Network
    Select the AirPort from the left hand side
    Click on the Locations combo box and select Edit Locations...
    Click on + to add a new location, call it "Home" (or anything else you prefer)
    Click on Advanced
    Select the AirPort tab and enter your network name
    Select TCP/IP tab. 
    Configure IPv4 Using DHCP
    Now click on Renew DHCP Lease.  After a few seconds you should get an IP address (probably 192.168.x.x)
    Click on Proxies tab.
    Select Auto Proxy Discovery and Use Passive FTP
    Click on OK and Apply, etc.
    If this doesn't fix your problem then I suggest your Airport card is failing and you need to visit an Apple Store.
    Bob

  • Unable to connect to new wireless network in Mountain Lion with Photosmart C4780

    I have a Photosmart C4780 and have just upgraded my imac to Mountain Lion. HP are not providing new drivers for my printer as they say it will work with Mountain Lion. I have downloaded software updates. However, I have just changed my wireless network as I have a new broadband provider but am unable to connect to it. My problem is that the set up assistant software provided which I used originally to set up does not work with Mountain Lion.
    Any ideas please?

    I have solved my problem, I've bought an Epson. It works perfectly. If HP can treat their customers with such disinterest and contempt I don't want to give them my money. 

  • Macbook (10.4.11) unable to connect to one wireless network

    We have one student who is unable to connect to our student wireless network. He's using a Macbook (black) with 10.4.11 and all updates. He's got a stock Airport card. We have an Airport Extreme broadcasting the network. Other students are able to connect without any problem. He's able to connect to our teacher's network without any problem.
    When we try to connect his airport to the student network, it reports "There was an error joining the AirPort network 'Riverstone Students'." No further information is provided. I've tried removing it from his preferred networks, removing the key from the keychain, and reconnecting, but no change.
    Any suggestions gratefully received!

    Just found out a little info about my work network. We are using a SMC Network 8014 W-G broadband modem and a Linksys WAP11 Wireless Access Point, and the security is WEP. I have tried to login to the device webpage to check/adjust settings but nobody here knows the password and "admin" doesn't work. I really don't want to do a hard reset and take the chance of screwing up the network for everybody in the office (apparently it was quite complicated to set up when they first installed it, I wasn't around then). Does anybody have any other ideas? Thanks

  • Photosmart 7525 connect via USB & wireless

    I just got a new HP 7525 and would like to know if I can access the printer using the USB connection for my primary desktop PC; and also have other PCs/devices occasionally and randomly access the same printer via a wireless connection using my router.
    This question was solved.
    View Solution.

    Yes, you can use the printer with both the USB and wireless connections simultaneously.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Unable to connect with the wireless feature

    I have the Linksys WRT54G version 8.0, it bridges with my DSL modem.  I have 3 wired desktops and 1 wireless laptop (which does not connect without wired connection).  According to the easylink advisor, we do not have an internet connection.  But I have internet connection as long as all 4 computers are wired in.  My problem now is we have a new ps3 and can not do the wireless connection.  I have checked all settings on router page and still shows no connection.  What am I doing wrong?  How do I fix this?  I can get on-line just can't use wireless.  Can anyone help?
    Thanks,
    Sharon

    You need to do Port Forwarding on your Linksys Router...
    Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
    Leave username blank & in password use admin in lower case...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 80 and End box type in 80, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    2) On the second line in Application box type in DEF, in the start box type in 443 and End box type in 443, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    3) On the first line in Application box type in GHI, in the start box type in 5223 and End box type in 5223, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    4) On the first line in Application box type in JKL, in the start box type in 3478 and End box type in 3479, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    5) On the first line in Application box type in MNO, in the start box type in 3658 and End box type in 3658, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    6) On the first line in Application box type in PQR, in the start box type in 10070 and End box type in 10080, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings
    7) Now assign the given ip address on your PlayStation
    ip address :- 192.168.1.20, subnet mask :- 255.255.255.0, default gateway :- 192.168.1.1...
    8) Also assign the dns addresses on the PlayStation
    Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
    9) Turn off your modem, router, and PlayStation...Wait for a minute...
    10) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the PlayStation and test it...
    As your PlayStation is Wireless make sure you are connected to your Wireless Network...

  • Unable to connect laptop to wireless network

    My MacBook Pro will not connect to my wireless network, but my iPad does so I know it must be a problem with my computer rather than the network. Any suggestions?
    I'm not sure if there is some obscure setting that I need to change.

    Give us more information, please.
    Is your wireless network supplied by your ISP, your landlord, your own router, or something else?
    What can you tell us about the settings on your wireless network? (Not the passwords.)
    Did this ever work, or is this the first time you have tried to connect the MBP to this wireless network?
    What model/year MBP is this? It has to be somewhat old if it is running Snow Leopard (10.6.8) as per your profile.

Maybe you are looking for

  • 3:2 aspect ratio getting converted to 4:3

    I'm importing a quicktime movie set at 740x480 (3:2) with square pixels (exported from FinalCut Pro 6). When I import it into iDVD the movie gets scrunched up into (apparently) a 4:3 ratio and everyone looks too tall and thin. If I open the movie in

  • New aluminum keyboard = G5 zombie?

    Normally I use ctrloptioneject to put my G5 Quad to sleep. With the new aluminum keyboard and the software update, this key combo turns the computer into a zombie. The mouse cursor disappears as expected, but the drives don't spin down and the screen

  • Weblogic 8.1 to Weblogic 10.3

    Hi , I recently tried to upgrade a portal app from Weblogic 8.1 to Weblogic 10.3 . Even though the p13n_ejb.jar and wps.jar are present. Its giving me the following errors during build. 1. The interfaces of the linked enterprise bean LdapPropertyMana

  • GMT or local time in background processing ?

    Hello all, In the Background Processing transaction, is the time for scheduled job in GMT or in Local time ? Regards, Michaël.

  • How to correct Runtime error R6034 when attempting to update iTunes on PC?

    How to correct Runtime error R6034 when attempting to update iTunes on PC?