UNABLE TO CREATE A NEW CONNECTION

An error was encountered performing the requested operation:
IO Error: The Network Adapter could not establish the connection
Vendor code 17002
PLEASE HELP ME TO CREATE A CONNECTION
I DONT KNOW WHAT VALUES SHOULD BE ENTERED IN THE COLUMNS TO CREATE A CONNECTION
PLEASE TELL ME THE VALUES....

SQL Developer is just a client tool. It requires a database to be used. If you don't have a database, then we can't help you. Do you have a database, or access to a database?
If not, try out our self-contained virtual machine that includes a database, SQL Developer, and some self-guided hands-on-labs:
http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html
Edited by: Jeff Smith SQLDev PM on Oct 27, 2012 9:10 AM

Similar Messages

I am unable to create a new email message when I connect to the internet through google

I am unable to create a 'new email message'when I connect to the bigpond.com webmail through the internet from my ipad2.

Try this. Settings>Safari>Block Pop-Ups>Off.
I have an Exchange account that behaved similarly to what you are describing. I finally realized that I had to allow pop ups in order to access my mail on the server.

Error while creating a new connection in ODSM for OVD

Hi all,
I am getting the following error while creating a new connection in ODSM for OVD.
Error log:
[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by:
=======
java.lang.NoClassDefFoundError: Could not initialize class
com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 28 more
How to resolve this issue.Pls suggest me.
Regards,
-Deena.

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Error in writing an Ant task for creating a new connection pool.

I have written the following ant task to create a new connection pool in weblogic 10.3.
<target name="pool.dev">
     <wlconfig url="http://localhost:7001/" username="weblogic" password="weblogic">
     <query domain="C:/weblogic/rtg-L0" name="myserver"/>
     <create type="JDBCConnectionPool" name="OneSourceConnectionPool">
     <set attribute="DriverName"
     value="oracle.jdbc.OracleDriver"/>
     <set attribute="InitialCapacity" value="1"/>
     <set attribute="MaxCapacity" value="5"/>
     <set attribute="Password" value="rating"/>
     <set attribute="Properties" value="user=rating"/>
     <set attribute="RefreshMinutes" value="0"/>
     <set attribute="ShrinkPeriodMinutes" value="15"/>
     <set attribute="ShrinkingEnabled" value="true"/>
     <set attribute="TestConnectionsOnRelease" value="true"/>
     <set attribute="TestConnectionsOnReserve" value="true"/>
     <set attribute="TestConnectionsOnCreate" value="true"/>
     <set attribute="TestTableName" value="SQL SELECT 1 FROM DUAL"/>
     <set attribute="URL"
     value="jdbc:oracle:thin:@xyz.com:1522:oradvl"/>
     <set attribute="Targets" value="myserver"/>
     </create>
     </wlconfig>
</target>
When I run it, I see the following error:
BUILD FAILED
C:\ganymede\eclipse\workspace1\RtgSvr\build.xml:286: Failed to connect to the server: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
     java.io.EOFException]
Can anybody please help me regarding this...
Thank you,
Sowmya

Hi everybody,
Thank you very much for your replies....actually I added weblogic.jar to the classpath of the target. So, now I dont see that error. But, I have another problem which is as follows:
<target name="initJDBC">
<wlconfig url="t3://${host}:${port}" username="${username}" password="${password}">
     <query domain="domain.name" type="Server" name="${target.server}" property="${target.server}"/>
     <create type="JDBCConnectionPool" name="TestConnectionPool">
     <set attribute="DriverName" value="oracle.jdbc.OracleDriver"/>
     <set attribute="Password" value="welcome"/>
     <set attribute="Properties" value="user=welcome"/>
     <set attribute="URL" value="jdbc:oracle:thin:@test.com:1522:oradvl"/>
          <set attribute="Targets" value=""/>
     <set attribute="TestTableName" value="SQL SELECT 1 FROM DUAL"/>
     <set attribute="TestConnectionsOnRelease" value="false"/>
     <set attribute="TestConnectionsOnReserve" value="true"/>
     </create>
     <create type="JDBCDataSource" name="TestDataSource">
          <set attribute="JNDIName" value="TestDataSource"/>
          <set attribute="PoolName" value="TestConnectionPool"/>
          <set attribute="Targets" value=""/>
          </create>
     </wlconfig>
     </target>
I am not knowing what to give in the value field of <set attribute="Targets" value=""/>. The following is my build.properties file:
target.server=myserver
host=127.0.0.1
port=7001
username=weblogic
password=weblogic
domain.name=testDomain
If I give <set attribute="Targets" value="${myserver}"/>, I get the following error:
BUILD FAILED
C:\ganymede\eclipse\workspace1\TestSvr\build.xml:290: Property not set: ${myserver}
When I set myserver=myserver in build.properties, I get the following error:
BUILD FAILED
C:\ganymede\eclipse\workspace1\TestSvr\build.xml:290: Error invoking MBean command: java.lang.IllegalArgumentException: Property Name and value not valid for the MBean. Value myserver for parameter[Targets].java.lang.IllegalArgumentException: Unable to convert the argument valuemyserver to class javax.management.ObjectName.java.lang.reflect.InvocationTargetException
Can someone plzz help me in this regard.
Thank you,
Sowmya

Unable to create a Service Connection Point

Hi -
I set up a new SharePoint 2013 environment. Everything installed successfully. When I launch Central Admin, it doesn't accept my logon ID/password. I found the following in the application event logs.    I assume our AD guys will
need to set up a new SCP as pointed out here:   http://technet.microsoft.com/en-us/library/ff730261.aspx
I just don't recall having to ever do this before in any of the dozen or environments that I had set up.
Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=cprt,DC=adt,DC=net doesn't exist in the directory.
   at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
   at Microsoft.SharePoint.PostSetupConfiguration.CentralAdministrationSiteTask.ProvisionAdminVs()
By the way, when I tried to run PowerShell to create the Admin Content DB, I got this error, even though the install account has sysadmin privileges on all databases:
New-SPConfigurationDatabase : Cannot connect to database master at SQL server
at SP2013Server -AdministrationContentDatabaseName. The database might not
exist, or the current user does not have permission to connect to it.
At line:1 char:1
+ New-SPConfigurationDatabase -DatabaseName SharePoint_Config -DatabaseServer
VMRS ...
I just went ahead and then ran the Product Config Wizard and it set up everything fine. Some folks were able to resolve by running config wizard twice?
http://social.technet.microsoft.com/Forums/sharepoint/en-US/6ae61eb1-9405-4421-9bc7-a0037f4ec29b/sp1-upgrade-failure-service-connection-point?forum=sharepointadminprevious

Hi,
According to your post, my understanding is that you were unable to create a Service Connection Point.
To resolve the “Unable to create a Service Connection Point in the current Active Directory domain”
error, you need to make sure you have permission to write to this container.
“You have to grant permission to write to this container to any user accounts or domain accounts that could run the SharePoint Products
Configuration Wizard. If the account does not have permission to write to this container, the following warning will appear in the log file for the SharePoint Products Configuration Wizard: Unable to create a Service Connection Point in the current Active
Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.”
http://technet.microsoft.com/en-us/library/ff730261.aspx
The “New-SPConfigurationDatabase : Cannot connect to database master at SQL server”
error is a common issue and has various resolutions.
More often than not it is a firewall issue on the SQL server so check that OR it's that SQL server has not been enabled for remote connections.
I would recommend you follow all the steps and options in
Cannot connect to database master at SQL server
and
SharePoint Install – Cannot connect to database master.
More information:
Configuring Service Connection Points for SharePoint 2013:
http://onpointwithsharepoint.blogspot.in/2013/06/configuring-service-connection-points.html
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Windows 7 Setup was unable to create a new system partition

I had windows 7 ultimate installed on a raid striping configuration and one of the hard drives crashed. I bought a new hard drive (WD Caviar Black 1TB) and when I went to reinstall windows 7, I got an error message saying Setup was unable to create
a new system partition blah blah blah. I did a lot of searching around for an answer, wondering if 1TB was too big of a hard drive to do a fresh install on, whether it was formated correctly, etc...
What I eventually found to be the solution was to go into the BIOS and change a setting. Somehow when my old hard drive crashed, the boot priority for hard drives automatically changed so that the first boot priority was one of my external hard drives.
After I changed the boot priority so that the first priority was the hard drive I wanted to install windows 7 on, the installation went smoothly. I think that's why other people had success after removing all external hard drives. After a
couple of reboots the boot priority most likely automatically updated to reflect which hard drives were actually connected.
Anyway, I had a hard time finding this answer, it was frustrating beyond all belief, and I wanted to make it easily available in case it helps anybody else out in the future.
Andy Mykrantz

Hi.
Thanks for sharing the information here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Acer aspire 5733 windows 7 intel core 13 inside, setupwas unable to create a new system partition orlocate an .......

i woke up today to see my laptop asking for a current password i entered
then it was asking
please input password for st9500325as
and nothing seems to be working
i tried to reboot the system and then the error message displayed in the title comes when i click next screen asking fro where do you want to install windows, i havent connected anything on the laptop and just
1 disc0 unallocated space 465.8gb
and i cant partition it also
i clicked on drive option and clicked on new( thets the only one i can click from the options) and it waited for some time as it is trying to do something and telling me failed to create new partition, what can i do. [laese explain in astep bt step
procedure,
i am not a genius on laptops or computer

Hi,
Quote: setup was unable to create a new system partition or locate an existing system partition.
It can be caused by corrupt partition table.
Boot from Windows installation media, press Shift + F10 at setup screen, and run chkdsk command to fix drive error.
http://technet.microsoft.com/en-us/magazine/dd637756.aspx
Also, please remmember to mark your system partition as active using diskpart command, if you do not have a system reserved partition.
http://www.sevenforums.com/tutorials/71432-partition-mark-active.html
NOTE This response contains a reference to a third
party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Andy Altmann
TechNet Community Support

Not possible to open/create a new connection within BT manager on Satellite M40

Bluetooh manager is open and present in system bar.
However it is never possible to open/create a new connection within bluetooth manager as it always say "bluetooh is not ready". Troubleshooting is required but no clear indication is available; button for wireless link is active and I am able to have wifi internet access at the same time.
It is never possible to open access to a PDA or mobile phone for file transfer through bluetooth.
Do i have to reload completely the bluetooth stack or is there another way to troubleshoot the bluetooh system?
Thanks you for replying if possible.

Remove the Bluetooth Monitor software if it is installed. Download the latest BT-stack v5.10.06 here:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/download.php
and install it. Ensure that the wireless switch is turned on and the suitable antenna is selected.
Press Fn+F8 key to select BT antenna. Selection menu only appears if WLAN and BT is inside.
Read the following if you should still have some problems:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

Assuming you're creating this event to place in your calendar, and assuming this calendar is shared with your iMac and iPad using iCloud, might the calendar be restricted on your iPhone?
Check Settings > General > Restrictions

Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Por

Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Port-Printer. The Adobe PDF Printer may be unavailable. I'm using the original CD to set up

And on what system? Acrobat 7 is not compatible with Windows 7, if that's what you are using. You need to upgrade then.
Mylenium

Unable to Create a new Analysis in OBIEE 11g

Hi All,
I have installed OBIEE 11.1.1.6.0 in Windows 8 .All the links in presentations services are working properly except New icon. I am unable to create a new report , dashboard,filter or prompt .I can see my Subject area in Manage privileges but it is not opening all the links in Manage links are not working .Weblogic has following roles Administrators ,BI Author, Bi Administrator ,Bi consumer but still unable to create a new report.
Any inputs are appreciated.
Thanks

Try to Open the catalog offline using Catalog Manager and give permissions as in http://www.cool-bi.com/Issues/CatalogPermissions.php
Try to do it on root folder.

Windows 7 Ultimate isn't installing on my iMac. Setup was unable to create a new system partition or locate an existing system partition

I have a 21.5" iMac (Late 2012) running OS X Mavericks. I'm trying to install Windows 7 Ultimate via Bootcamp but whenever i get to the setup part it goes wrong
These are the steps I followed
I selected all the options since I didn't have the drivers or an install disk
it copied the Windows 7 iso image, downloaded the support software, and saved the support software to the flash drive (8GB)
I selected a partition size - I gave windows roughly 100GB
and I let it install
Right now I'm at the part where it says " where do you want to install windows? I selected the bootcamp partition and formatted it. It now says
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
WHAT DO I DO?

I had to read the apple instructions several times before they started to make sense. I burned my iso onto a DVD and had the required USB for support software. Are you trying to use the single USB method?
This article has a lot of info on the single usb method

Boot Camp - Setup was unable to create a new system partition....from Windows install

Hi folks. So I ran the boot camp wizard and made a USB install key for windows from that. I boot to it and everything works until I get to the install. I format the Boot Camp partition as indicated in the walkthrough and then I get "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." from the Windows installer. What do I do? Thanks.

just to add to the mix. . . i just got a new macbook retina.
Originally used a USB flash drive. Hit the same barrier described here.
Spent a few hours with drive unplugging / replugging silliness. No progress. Went back into OSX to attempt using an external DVD drive. There is no option for that in Bootcamp assistant now - must use USB.
Grabbed a different USB stick and started again. This time I used the other USB port on the macbook (the one on the left). Everything worked fine this time!?
You still have to go into "advanced options" and hit "format" when you get to the partition screen.
Moral of the story: different stick, different port. Sounds random. If that doesn't work, try changing your socks and putting on a hat.
Good luck!

UNABLE TO CREATE A NEW CONNECTION

Similar Messages

Maybe you are looking for