Unable to create a report painter form (Message no. KH205).

Dear all,
I am trying to create a report painter form, but the system gives an error:
Key figure scheme contains errors -> check definition
Message no. KH205
Diagnosis
Entry not contained in Table T237A.
Procedure
Check key figure scheme (in particular line 9062) in table T237A.
I checked in Tcode KER1 but did not find any Key figure scheme.
Afterwards, I checked table T237A and T237 and found out that number of hits in table 237A is less than in T237A.
I think this is the reason why system has such reaction.
Please help me with this issue.
Best regards,
Linh.
Edited by: tvlinh on Mar 7, 2012 11:22 AM
Edited by: tvlinh on Mar 7, 2012 11:22 AM

Hi,
This issue can occur if you have transported the Key Figure Scheme (KFS) from another system and /or deleted value fields. Has this happened ?
To fix the issue you need to renumber the T237 in the source client executing the function module RKE_FILL_TABLES_T237FF as mentioned in the note 13838.
After this try to create a new form and check if that works. If there are still problems with the existing form/report then the best
way might be to delete and create again
regards
Waman

Similar Messages

Bug? - Getting "ORA-20001: Unable to create updateable report"

We have created hundreds of simple tabular reports, but have come across 3 tables that we cannot get past the following error for when finishing the last step of the create wizard:
ORA-20001: Unable to create updateable report. ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Error creating tabular form.
Return to application.
Here is the DDL for this table:
CREATE TABLE ancfx_test
(ANCFX_ID NUMBER(31,0) NOT NULL ENABLE,
APP_DTL_LVL_CD VARCHAR2(160),
NOTE_CALL_FR_TYP_CD VARCHAR2(15),
ANCFX_VOID_IND CHAR(1) DEFAULT 'n' NOT NULL ENABLE,
PCT_AUDT_USER_CREA VARCHAR2(30) DEFAULT 'PCT',
PCT_AUDT_DTM TIMESTAMP (6) DEFAULT SYSDATE
I have tried an alternate surrogate key, renaming the table, excluding the 160 character column etc., but not able to create this form.
Based on this and the many hundreds of unique tabular forms we have created, seems we may have run across a bug?
Any help would be greatly appreciated.
Thanks!

Hi Scott,
Turns out we did reach some sort of limit in APEX regarding how many pages can be assigned to a tab as the current tab for assigned pages. We had around 750 or more pages listed under a given tab as the current tab for those pages, which apparently created a list of page numbers in a string presumably that exceeded the maximum size for a field somewhere in APEX apparently, thus the error about the character buffer being too small. Not only could we not create new pages, but we could not even view the tab page in the shared components area for this tab without getting the error, but could get into the tab page to view the page numbers assigned to the tab.
To get around this we had to remove all the page numbers that were listed for the tab as the current tab for those pages. Once that was done, everything was back to normal, although the tab in question is no longer shown as the current tab for any of those pages, which is not really a problem for us.
Anyway, seems Oracle may want to review any field limits that are related to page numbers assigned to a tab to be the current tab for those pages and consider doubling that limit. In our case, 785 pages were too many for this limit, and there were no messages that helped us deduce where this was coming from - just brute force trial and error to figure this one out. Since we have more pages to go, we might run into some limits elsewhere which I'll post here if so.
Monte Malenke

How to create a report in Form line Style and can display Image field?

Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnp

Here you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers

Unable to create a report in bi publisher 10g

Hi All,
Unable to create a report in bi publisher. When we tried to create a report abcd, then it is giving the below error.
Operation failed: /abcd/abcd.xdo.
When we tried to create a report with the existing name, it is saying
An object with the same name already exists: /crm/crm.xdo
I can say this is not any permissions problem, I have logged inwith Administrator user.
Thanks

Hi,
Can any one..???

How to find report created with Report Painter?

Hi!
how to find report created with Report Painter?
Here is the information that I have:
Object filename, let's say Y_P01_90000001
Report painter object INV-102
The thing is that Library is unknown, thats why I can not find it via GR22...
Any ideas?
Will reward,
Mindaugas

Check in GRR3 under INV node...

Unable to create the protocol specific B2B message

Hi,
I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
 at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
 at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
 at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 ... 7 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
 at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
 at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
 at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
 ... 6 more

Hi,
I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
Description: Unable to create the protocol specific B2B message
StackTrace:
Error -: AIP-51503: General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
 at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
 at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
 at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 ... 7 more
Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
 at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
 at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
 at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
 at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
 at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
 ... 6 more

Need a Demo for creating a report painter

Hi,
I am new to report painter. i have already gone through some documents but i dint get a clear idea.
Can anyone give a demo for creating a Report Painter?
Thanks in advance.
Regards.

hi
you can refer to following links
http://help.sap.com/saphelp_47x200/helpdata/en/eb/1377e443c411d1896f0000e8322d00/frameset.htm
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
Refer the following links :
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
this may help you
regards

How to attach the T.CODE to a report created through REPORT PAINTER

Hi all,
Please tell me "How to attach the T.CODE to a report created through REPORT PAINTER"..
Please show me the way how to do it as its getting too firing issue !!
Awaiting for the early responses !!
M.Soni

Dear All,
I got some good inputs from Jessie on this issue and observed that the reports which are created through report painter are standard one having entries in the TSTCP table .
But the reports(Through Report Painter) which are creaed by us has no entry in TSTCP table !!
Kindly show the way, how to attach the T.code to the reports which are created through report painter. as its getting so buggy now !!
Please tell me if someone know about this.
Please note all my reports are created directly in the 500(Production).
Waiting for quick inputs !!
Regards,
M.soni

Hi Folks, I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.

Hi Folks,
I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.
Thanks in advance

i have also tried that but no use can u give me any other way.......

Unable to create web reports using WAD in BI 7.0

We are unable to create web reports using WAD in BI 7.0 because of the missing BI metadata. Please take a look at the error below .

didnt see the error??

Can we create a report painter report which shows the details of CC/CE/IO?

Hi,
I am trying to create a report painter report which shows the details of cost elements,cost centers and internal orders in a single section.I am able to create reports with 2 characteristics (like CC/CE or IO/CE etc.) but not with 3 characteristics (CE/CC/IO) which is my case.I am trying to get data something like below.Is this even possible using report painter?I will appreciate if any one could suggest how to do this.
CE          CC                        IO                        Amt
600000 8190001100           1100001                $1000
                                          1100002                $2000
                                          1100003                $3000
                                                                      $4000
620001 8190001101           1100004                $6000
                                          1200001                $2500
. . . . . . . .and so on
Thanks,
Saurabh.

>
But when i am using the same synonym in crystal report design, my report is working fine.. but the same synonym is available as invalid in database..
>
What does 'my report is working fine' mean? Are you saying that if you rerun the query it retrieves fresh data from the database?
What does 'same synonym is available as invalide in database' mean? How are you determining this.
Synonyms can be created for objects that do not yet exist.
create synonym q for table_does_not_exist
select * from user_objects where object_name = 'Q'
SYNONYM_NAME,TABLE_OWNER,TABLE_NAME,DB_LINK
Q,SCOTT,TABLE_DOES_NOT_EXIST,

Unable to create a reports server to test web.show_document in Forms 10.1.2

Hi all,
In Forms 10.1.2 DS, I'm trying to use the web.show_document built-in to 'generate' a report from a .jsp file. This JSP file was created by wizard through creating a report object in the Object Navigator. The code I'm using from a push button is as follows:
web.show_document('http://<hostname>:8889/reports/rwservlet?report=<dirpath>\Sales.jsp&userid=<username/password@connectstring&server=<server_name>'
As far as I am aware no 'reports server' has been created so I've tried the following command in a dos window:
rwserver -install <server_name>
but this just raises an 'alert' indicating that I should consult an installation guide to setup and install the server. So my questions are:
(1) Is what I'm trying to do supported in DS?
(2) What installation guide should I consult?
Any information on this would be gratefully appreciated,
Kevin.

Hi Inol,
Thanks for the response. I agree with the comment about exposing user details, I'm just doing a bit of experimenting at the moment! I tried to do what you suggest in terms of changing the URL but whether I reference the server or leave it out, the subsequent browser session seems to hang and then eventually I get a 'Page Not Found' response. On using the URL 'http://127.0.0.1:8889/reports/rwservlet/showenv?', I get an 'Access Denied' Error Page. Is there something additional I need to set up with regards to Reports to get this to work?
regards,
Kevin.

Unable to create cluster, hangs on forming cluster

Hi all,
I am trying to create a 2 node cluster on two x64 Windows Server 2008 Enterprise edition servers. I am running the setup from the failover cluster MMC and it seems to run ok right up to the point where the snap-in says creating cluster. Then it seems to hang on "forming cluster" and a message pops up saying "The operation is taking longer than expected". A counter comes up and when it hits 2 minutes the wizard cancels and another message comes up "Unable to sucessfully cleanup".
The validation runs successfully before I start trying to create the cluster. The hardware involved is a HP EVA 6000, two Dell 2950's
I have included the report generated by the create cluster wizard below and the error from the event log on one of the machines (the error is the same on both machines).
Is there anything I can do to give me a better indication of what is happening, so I can resolve this issue or does anyone have any suggestions for me?
Thanks in advance.
Anthony
Create Cluster Log
==================
Beginning to configure the cluster <cluster>.
Initializing Cluster <cluster>.
Validating cluster state on node <Node1>
Searching the domain for computer object 'cluster'.
Creating a new computer object for 'cluster' in the domain.
Configuring computer object 'cluster' as cluster name object.
Validating installation of the Network FT Driver on node <Node1>
Validating installation of the Cluster Disk Driver on node <Node1>
Configuring Cluster Service on node <Node1>
Validating installation of the Network FT Driver on node <Node2>
Validating installation of the Cluster Disk Driver on node <Node2>
Configuring Cluster Service on node <Node2>
Waiting for notification that Cluster service on node <Node2>
Forming cluster '<cluster>'.
Unable to successfully cleanup.
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Event Log
=========
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 29/08/2008 19:43:14
Event ID: 1570
Task Category: None
Level: Critical
Keywords:
User: SYSTEM
Computer: <NODE 2>
Description:
Node 'NODE2' failed to establish a communication session while joining the cluster. This was due to an authentication failure. Please verify that the nodes are running compatible versions of the cluster service software.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{baf908ea-3421-4ca9-9b84-6689b8c6f85f}" />
 <EventID>1570</EventID>
 <Version>0</Version>
 <Level>1</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8000000000000000</Keywords>
 <TimeCreated SystemTime="2008-08-29T18:43:14.294Z" />
 <EventRecordID>4481</EventRecordID>
 <Correlation />
 <Execution ProcessID="2412" ThreadID="3416" />
 <Channel>System</Channel>
 <Computer>NODE2</Computer>
 <Security UserID="S-1-5-18" />
</System>
<EventData>
 <Data Name="NodeName">node2</Data>
</EventData>
</Event>
====
I have also since tried creating the cluster with the firewall and no success.
I have tried creating the node from the other cluster and this did not work either
I tried creating a cluster with just a single node and this did create a cluster. I could not join the other node and the network name resource did not come online either. The below is from the event logs.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 01/09/2008 12:42:44
Event ID: 1207
Task Category: Network Name Resource
Level: Error
Keywords:
User: SYSTEM
Computer: Node1.Domain
Description:
Cluster network name resource 'Cluster Name' cannot be brought online. The computer object associated with the resource could not be updated in domain 'Domain' for the following reason:
Unable to obtain the Primary Cluster Name Identity token.
The text for the associated error code is: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
The cluster identity 'CLUSTER$' may lack permissions required to update the object. Please work with your domain administrator to ensure that the cluster identity can update computer objects in the domain.

I am having the exact same issue... but these are on freshly created virtual machines... no group policy or anything...
I am 100% unable to create a Virtual Windows server 2012 failover cluster using two virtual fiber channel adapters to connect to the shared storage.
I've tried using GUI and powershell, I've tried adding all available storage, or not adding it, I've tried renaming the server and changing all the IP addresses....
To reproduce:
1. Create two identical Server 2012 virtual machines
(My Config: 4 CPU's, 4gb-8gb dynamic memory, 40gb HDD, two network cards (one for private, one for mgmt), two fiber cards to connect one to each vsan.)
2. Update both VM's to current windows updates
3. Add Failover Clustering role, Reboot, and try to create cluster.
Cluster passed all validation tests perfectly, but then it gets to "forming cluster" and times out =/
Any assistance would be greatly appreciate.

Report Painter form issue

Hi
I have changed the form layout in KE85 for one of our report painter report. I have transported the changes to quality. The form changes are appearing as per Development but the screenlayout is not changed.
Is there anything else I should do like import, or generate the report etc. If so kindly let me know the details.
Thanks
N Sankar

Hi Franc
Thank you very much for your valuable input. But my report does not have report group. It is a report created by using a form in KE84. This form is attached to a t_code and the same transported to quality. In quality the form changes are appearing in the form. Whereas when I execute the form changes are not called.
This is what confusing me a lot. Can you please guide me on this.
Thanks
N Sankar

Error when creating a Report with Form component

I am trying to create a new report with form component but when I try to choose the Table/View name I get a web error "404 web not found". I know for a fact that the list is working because I see the list when I create a "simple form". Is this a bug or i need to do something to get it working? thanks

419008,
It is a bug that has been identified and will be corrected in an HTML DB patch. There is nothing you can do to correct it.
This bug is specific to Internet Explorer and utf-8 encoding. It is not a bug with IE, it is a bug with how we handle this for IE.
Joel

Unable to create a report painter form (Message no. KH205).

Similar Messages

Maybe you are looking for