Unable to create AUC automatically

Hi everyone
am not able to create AUC automatically while creating Internol oder which has been assigned to investment profile. am getting below error
i,e asset class 29iv1 not used in company code 2001............asset class already maintained with investment measure.
could any one throw some points to solve an issue.
Regards
Raj

Hi JPA
I already maintained the class with investment measure only in OAOA.
could you throw some more points to solve an issue
Regards
Raj

Similar Messages

Line item Settlement and KOB5 for automatically created AUCs to PM orders

Hello Experts,
I am trying to set up line item settlement for automatically created AUCs. We would like to use line item settlement because we want to see the costs split up by either percentage or amount when settled to the AUC. If I can't settle by percentage or amount to the AUC then i'd like to be able to temporarily block some of the costs from settling. This is for billing not capitalization purposes since all costs will eventually settle to one final asset. The settlement is done using transaction KO88 or KO8G and automatic processing type. I’ve configured a PM Order type as an investment order and set up the related investment profile and investment asset class. Some of the things I've determined from my testing:
Using transaction KOB5, costs can be split up by creating other distribution rules, but only to another object (i.e. another
asset, order, cost center etc. by using the Preliminary) not to the automatically created AUC linked to the order
The default settlement rule is account assignment category FXA, percentage rate 100%, settlement type AUC to the AUC
and therefore cannot be updated/altered when using KOB5 or any other transaction.
Once the costs are settled to another object other than the AUC, those costs cannot be settled to the final asset. Creating Preliminary
settlement rules to a receiver IO and changing the period or fiscal year will not “block” costs from settling whether the processing type is automatic, by period, partial capitalization or full settlement.
I’ve been testing this out in our development client and need verification that this is the way that transaction KOB5 works with line item settlement or did I do something incorrect .
Your feedback is greatly appreciated. Thank you in advance.

Hi Zaid,
Thank you for your response. Assets are not my area so I’m not sure if I missed a transaction or step in the process. I tested this out by doing the following steps:
Created AUC Asset class with line item checked
Assigned PM Order type as non-investment with no investment profile and created order number
Created a main asset number
Created an AUC sub asset number to step 3
Created settlement rule to sub asset number on order
Posted costs to order
Settled from order to AUC with transaction KO88
Created distribution rules for asset with transaction AIAB
Settled from sub asset to main asset number with transaction AIBU
When I settled from the sub to the main asset number in step 9, I found I lost the line item detail. Is there another configuration setting I need to make to allow me to see the line item detail when I use AIBU?
Thank you,

[ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null

Hi,
I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
[ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
Oh, and this happens only with the projects which deal with JMS queues.
We are using OSB:
Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
Please help.
Thanks,
Mukund.

Hi,
I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
[ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
Oh, and this happens only with the projects which deal with JMS queues.
We are using OSB:
Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
Please help.
Thanks,
Mukund.

I have Photoshop Elements 13 and unable to create a panaroma of my imported photos. I clicked on file and there is no automate and photomerge. Any suggestions?

I have Photoshop Elements 13 and unable to create a panorama photo of six photos. I imported the photos from my computer successfully and clicked on file. However, there is no automate and photomerge buttons. Any suggestions?

Make sure you are in Expert Mode and then the photomerge button is in
"Enhance" menu item.
Good luck.

Export gives "Unable to create" error,Can't EXPORT or SHARE modified images

I am running iPhoto 8.1.2 and I cannot export or share any images I modify.
Upon editing images (cropping or enhancing color profile), I am unable to drag and drop images to my desktop (gives a "∅" symbol) which I used to do all the time. I cannot export them - iPhoto gives an error: "Unable to create" filename error...
If I look at the "Show file" and verify the contents of the folder, none of the images I have modified appear there. If I look at "Show original file" all the original files are there but do not have my edits/cropping, etc. Where are my modified images going and how can I get to them? iPhoto seems like it is getting Alzheimer's or something...
I have tried closing and re-opened iPhoto and all the images thumbnails appear to be ok with my updated crops/enhancements. Double-clicking and opening them opens files with the correct edit/enhancements. Everything seems ok until I try to export or share any of the modified photos.
I tried rebuilding iPhoto and selecting the first 4 options but after the rebuild the problem still persists...
None of the files that I cropped/enhanced appear in the "Modified" folder for that date. There are some files there, but they appear to be files that I deleted!
So, where are my cropped/enhanced photos going??? iPhoto shows them ok in the Events, etc. but they are not in the "Modified" folder and I cannot export, drag/drop, email or share them...
This has been happening to me for awhile now and it is very frustrating. iPhoto is ok so long as I don't do any cropping or enhancing. If I do that, then it gets all screwed up...
I know that I can use something like "iPhoto Library Manager" to rebuild stuff but I don't want to lose any of my data. I have done extensive work with faces, places, attributes, names, etc...
I JUST WANT iPHOTO TO WORK LIKE IT IS SUPPOSED TO AND LIKE IT USED TO!
Thanks,
Steve

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair Library permissions.
If the permissions have been mucked up somehow, it's likely that your edits have not been saved.
If the fails:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Unable to create Accounting document for my Outgoing excise Invoice

Dear All,
I am implementing sales from Factory. I am unable to creat accounting document for my Outgoing excise invoice. When I click the Utilization button, The excise invoice type is selected Deemed.
1. How to control which Which Excise invoice type should be selected in J1IIN.
2. For Deemed exports will system not genererate Accounting document for Excise Invoice?
3. Where to view the excise invoice document types (Like Billing and order types)
Thanks & Regards

For deemed export sales,
-Accounting documents will not get generated. (ref: Excise Acct Determination in CIN settings, you will not find Excise Tranraction type:ARE3 for which G/L account will not be assigned)
-Excise Invoice type will be automatically triggered based on configuration : Excise Group / Series Group detetermination.
- For Deemed Exports , only Quantity will get updated in RG1, but not the value. thats the reason, accounting document will not get generated.
- This excise invoice is created, for - to update the RG1 registry / ARE3 creation.
hope it clears
regards,

Unable to create New objects in SE37 & SE38

Hi Experts,
I am ABAPer and facing belowing mentioned problem.
I am unable to create any custom objects like executable programs/BAPI/FM due to performance.
I am able to open required transactions like SE37/SE38, after that If I try to create or test object, the system is not responding, again we need to go to task bar to close the session.
I tried to debug SE38 to know what happening internally, it is closing automatically.
I tied the below mentioned steps .
1). I am able to Creating/ Deleting Tables in SE11.
      Unable to create executable program.
       Open SE38 àEnter z----- object name à Click on Create à in new window Provide Description àSelect program type u201CExecutableu201D à in new dialogue select package &
       click to save the object. (Here is the problem , we need to restart session, unable to save object properly)
2). Function module and BAPI I am trying to test in SE37.
       However I am able to open se37 transaction with in few seconds,
      After entering FM/BAPI name in SE37, if we click on Display or try to execute that FM/BAPI system is not responding.
       Open SE37 à Enter existed object name example RFC_READ_TABLE à click on Display   (System will not respond, no content will be displayed)
As per my knowledge, when ever interacting with SAP Database system is going to struct,
However a basis Consultant can understand better then me.
Please suggest and let me know what need to be done further.
Thanks & Regards,
SAI

Hi,
I had that also, the window war frozen.
The problem was the editor mode.
=> go to poperties.
=> change to mode to "old editor". don't use the first option (Now, I don't know the description). "Editor (new)"
(a bug of the frontend or the backend)
Sven

Exception caught by adapter framework: unable to create a socket

Hi All,
I am using Idoc to XI To SOAP scinario. I got a alert asying that some messsage id is error. When i am trying to monitor that massage by taking help of the messgae id in the alert the message was successful in the SXMB_MONI,. Then i Went to message monitoring There the message statu was syetem error. Errror log is *Exception caught by adapter framework: unable to create a socket*. The communication channel was inactive wehere as the statsu of the channel was active in the directory... what is the reasonm for this error. and how to resilev this.

As pointed already, a socket exception occurs when then message cannot pass the Firewall settings....there will be a port configured to send message to the SOAP receiver.....ask network guys to make relevant settings so that the port is free from Firewall restrictions.
@Supriya --> Active/ Inactive status of the channel in ID and in CC monitoring are different things.
To change the status of your CC in RWB --> Stop & Start your SOAP CC....the channel will remain inactive till no message is passed through it....once a message is passed the status will change to success/ error.
You can also change the CC status to Automatic.
Regards,
Abhishek.

Unable to create Business System with role Integration Server

hi Experts,
we are unable to create a BS with role of integration server, its throwing error with internal server 500.
please advise. we do not have any issues while creating TS with role of WEBASABAP.
thanks and regards,
Kesava
Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AM

Hi Kesava,
what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
best regards,
Markus

Unable to assign AUC as settlement type in settlement rule for FXA category

Dear Experts,
One of my requirement is that one WBS has several actual posting for AUC of different types and settle through CJ88. Investment profile is not in scope.
To run the above scenario, i created AUC manually via AS01 of different types. When i create settlement rule manually for that WBS i can't see the settlement type "AUC" for FXA category. I can see only the settlement type of "PER and FULL". 100% settlement should be done for all AUC posted for that WBS at the time of each period closing.
Could you help me to resolve this issue asap?
Regards
Vetri

Hi,
To get AUC in settlement rule , you need to allow settlement at wbs level which use to be controlled in settlement profile. Also you wont find AUC but u will find fixed asset- FXA.
One more thing settlement rule come automatically when you run the settlement first time as captilisation. You will get the settlement rule automatically.
Regards
Abhishek Sinha

Unable to Create Invoice from iSupplier

I am unable to create invoice from isupplier module,
the moment i click on create invoice "with a PO" or "without a PO" under finance Tab,
i get this error "You cannot complete this task because you accessed this page using the browser's navigation button(the browser Back button, for example).
But I have not accessed the pages with any browser navigation buttons at all.
please advise what may be preventing me from creating invoice?

This is caused by the incorrect setup of the browser.
The browser's "Temporary Internet Files" setting for "Check for newer versions of stored pages" was set to "Never". This caused the browser to pull up the old data instead of querying the server.
Please make sure the browser's "Temporary Internet Files" setting for "Check for newer versions of stored pages" is set to "Automatic".
You Used Your Browser's Navigation Buttons To Get Here (Doc ID 1214138.1)

Windows 7 Setup was unable to create a new system partition

I had windows 7 ultimate installed on a raid striping configuration and one of the hard drives crashed. I bought a new hard drive (WD Caviar Black 1TB) and when I went to reinstall windows 7, I got an error message saying Setup was unable to create
a new system partition blah blah blah. I did a lot of searching around for an answer, wondering if 1TB was too big of a hard drive to do a fresh install on, whether it was formated correctly, etc...
What I eventually found to be the solution was to go into the BIOS and change a setting. Somehow when my old hard drive crashed, the boot priority for hard drives automatically changed so that the first boot priority was one of my external hard drives.
After I changed the boot priority so that the first priority was the hard drive I wanted to install windows 7 on, the installation went smoothly. I think that's why other people had success after removing all external hard drives. After a
couple of reboots the boot priority most likely automatically updated to reflect which hard drives were actually connected.
Anyway, I had a hard time finding this answer, it was frustrating beyond all belief, and I wanted to make it easily available in case it helps anybody else out in the future.
Andy Mykrantz

Hi.
Thanks for sharing the information here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Error: "Unable to create a shortcut for MyApp" on Windows 2008

When I try to install my JAVA app on windows 2008 via Java Web Start, it pop up a error message "Unable to create a shortcut for MyApp". The app can startup and work correctly after clicking "ok" on error message. BUT, there is no shortcut created on Desktop or Start Menu.
This problem occured on Windows 2008 ONLY. I have test the installation process on different OS with JRE 6u14 and 6u20:
Windows XP PASS
Windows 7 PASS
Windows 2003 PASS
Windows 2008 FAIL, can't create shortcut on Desktop and Start Menu
And I have test the demos on http://pscode.org/jws/api.html, the problem is same.
Does any one has any idea on this?

AndrewThompson64 wrote:
- Menu items do not work on Ubuntu Linux at all.
- As a result of that, I am thinking to declare neither desktop shortcuts nor menu items in the JNLP file, but instead using the IntegrationService(1) to perform more specific tests, and offer the end user whatever is available.
- This is probably a better strategy overall, because if you automatically create desk-top shortcuts (or menu items) for the user, you will discover there is always someone who considers them an unnecessary bother.
1) BTW - I have been meaning to do a demo. of the IntegrationService and add it to the other examples at PSCode, but have not yet found the time. ;-)Thanks for reply.
But I don't understand very clear. I'm focus on the windows platform not Linux. Do you suggest to create shortcuts and menu items manually by coding in Applet?
I prefer to use the JNLP file cause it works good on the other OS than to change my code.
What I want to know is:
1. Is it a bug for JRE on Windows 2008?
2. If NO, how can I make it work on Windows 2008? Do I need change some System Setting or Browser Setting?
3. If YES, maybe I can try to change my code, but why there is no bug filed in the Bug Database?
BTW, I use the IE browser.

Unable to create communication channel - RFC

Hi ,
I am trying to create communication channel automatically , when adding business systems from SLD to integration repository. I get the following error only for RFC
all other communication channel gets generated correctly.. Is there any thing i am missing.
HTTP communication channel GeneratedReceiverChannel_HTTP created
IDoc communication channel GeneratedReceiverChannel_IDoc created
XI communication channel GeneratedReceiverChannel_XI created
Unable to create communication channel: Unable to generate the communication channel (NWR_107, GeneratedReceiverChannel_RFC): com.sap.aii.utilxi.misc.api.ClientServerException
Thanks,
Ganesh Ram

Please run transaction SLDCHECK. The connection to SLD might not be working properly.
Plus, in the business system you created, check if client number and all other parameters associated with SAP systems are valid.
Dmitriy

Getting "Unable to create VOLUMES/" error when exporting photos

I am trying to export a number of photos from iPhoto '08 to a USB stick that has been freshly formated with FAT 32. When iPhoto reaches a photo that has a vertical orientation the export stops and throws this error:
"Unable to create VOLUMES/JUMP DRIVE/filename"
These photos were taken with a Canon Powershot SD700IS. The camera has the ability to sense orientation when the picture is taken. It will automatically rotate pictures that were taken while holding the camera on its side. If the picture was taken with a horizontal (normal) orientation the export is successful.
I was able to work around this by opening the offending files in Preview and saving them from there. Obviously this is a time consuming extra step that shouldn't be necessary.
If anyone has any ideas I would greatly appreciate them!
Thanks!
Message was edited by: MTEGuitar

Then you have a managed library.
Go to your Pictures Folder. There you'll see the icon for your iPhoto Library. Right Click on that icon and select 'Show Package Contents' from the resulting menu. A Finder window will open and you'll see your Library internals. Have a look for the /Originals Folder. Inside it will be the folders for your Events. These should include the full sized photos.
If they do, then
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Unable to create AUC automatically

Similar Messages

Maybe you are looking for