[ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null

Hi,
I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
[ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
Oh, and this happens only with the projects which deal with JMS queues.
We are using OSB:
Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
Please help.
Thanks,
Mukund.

Similar Messages

Can not activate standard change list due to Not enough spaceq

Hello All,
I am trying to activate my XI repository changes on standard change list. I am unable to activate my standard change list due to can not not enough space.
I think that the problem might be I have more than 14 name spaces under one software component with more objects under individual name space.
Please advise how to activate it?
Many Thanks!
Raghu

well try to activate each object one by one
dont activate the change list as a whole !!!
(just a suggestion)

Unable to create a distribution list

Hi all,
I am trying to create this distribution list for a report and I am getting this error
"The required entry variables in query ZABC_DEF_Q001 are not filled".
When I click on this error I get another message Notification number RSRD 250.
Also apart from the above mentioned error, this is the warning I am getting:
The broadcast setting is not correct and has not been saved
Notification Number RSRD 160
I opened this query from query designer and there are warnings for 2 calculated Key Figures
Avg - Receipt Val and
Avg Receipt Qty.
The warning for both of them is
Invalid value 0 for property 'Ref. characteristic' of element 'Average Receipt Value'.
But inspite of the error and warning mentioned above the query is running perfectly from Query Designer. But I don't understand why am I not able to create the distribution list for this report.
Please advise where the problem is and how do I create the distribution list for this particualr report?
Thank you.

Hi Pavan,
Did you get the solution.
I am also facing the same problem,
Regards
Pramod

Unable to create the Invoice list

Hi
We are recently went to go live. We have an issue related to the Invoice list. The issue is like this..........
1. User wasnot maintained the information in Payer master data(Invoice list date & invoice dates).
2. He created the sales order, delivery & Billing for around 100 billing docs for the same payer.
3. Now he is asking for the Invoice list for the 100 billing documents.
Anybody can guide how we can able to create the Invoice list.
Thanks in advance.
With Regards
Ravi Kumar.T.N.

Hi Ravi,
1. Assign the billing document types to the Invoice list type in customizing.
IMG --> SD --> Billing --> Invoice Lists --> Assign Invoice List type to Each billing type
Note that there are basically 2 standard types of Invoice lists, LG and LR. Select the billing document and assign to relevant Invioce List type [LG/ LR]
2. Maintain Invoice List dates in Customer master [Payer] billing tab.
3. Maintain the pricing condition types RL00 and MW15 in the relevant pricing procedure.
4. Maintain out put condition records for LR00 and RD01 [for Printing Invoice list]
5. After creating more than one billing docs, use T-code VF21, select the billing docs and execute. This will result in creation of Invoice list.
Regards,
Rajesh

Where is the "search" feature in ibook? How do I create a vocabulary list of words and technical terms?

Is there a "search" feature in iBook on my ipad; and how can I create a "vocalbulary List" of terms or words while reading or studying with ipad?

Tap the page of the iBook then tap the magnifying glass for the search feature. Use Notes for your vocabulary list.

Unable to create Menu Item List Buttons in Forms - Not Working!

Hi guys,
I need desperate help since I have been stuck on these for 2 days and I am unable to move forward!!
I am trying to create a pdf form using Acrobat pro 9 and Adobe LiveCycle Designer ES. Since I am new to this, I have been browsing through numerous sites, forums and tutorials to learn about this. So far, I was able to create the forum with text fields, etc.. I am trying to have a column in my pdf form where the users can simply copy & paste image icons here..I was having difficulty with this already and have done numerous searches in google. In the end, I thought I am better off trying to use the "stamp" tool for this instead of image field. So this is what I did:
1) I already placed the image icons (that the users will be copying & pasting) on my pdfs so users can simply click on it to select the image.
2) I added a new bottom to this form which has the short cut to the menu item "copy" function. I labeled this button as 'Copy' and to this button, I added the following javascript for "Mouseup":
app.execMenuItem("CopyFileToClipboard");
3) Next I created another button that I called 'paste' and this button executes the "Paste Clipboard Image as Stamp Tool" menu. This button has the following javascript:
app.execMenuItem("Annots:Tool:StampFromClipboardMenuItem");
I thought that after doing the above, the user should be able to click on one of the images in the pdf, then click on 'copy' button and in the end click on 'paste' button that will then run an action so user can stamp this copied image to where ever they want in that file. But this is not happening!! I dont why?? Nothing happens when these buttons are clicked. I have made sure that the "Extended features in Adobe Reader..." is enabled and also tried running the above javascripts on my console window to test it and i know that the actual javascript code is not at fault since these functions works when I try the code through the debugger window. But I just cannot figure out why these menu item functions are not working when the buttons I had created are clicked!!! I dont know if what I have done is correct or if there is a easier way to achieve what I am trying to do!! Its a shame there is no simpler way for the end-users to copy and paste images to the columns in the pdf forms.
please help me understand why the above button are not working....any help will be great!!

Hi Paul,
This is further to our email correspondence. I am just pasting your email response here since it may be useful to other newbies like me:
"Ok here you go ......I had to add the new row via a script object as the new objects are not completely available until the script ends so I cannot resize the new row from teh current script.
Then when we resize - we have to resize the row, the cells and the image ....we start with all existing subforms then we do it for the new row that was just added.
Lastly I see that you have a delete row button. This will have to be part of the row otherwise we ill not know which row the user will want to delete .....unless you ask them (which is not good UI design)."
I was really impressed the way you modified the script so the table height does not change when new rows are added. That did help me in understanding the methods and it will certainly be v useful to me in the future. I have been practicing and getting a hang of LS and I have actually decided to redesigned my form since it appears that trying to have a fixed table height is quite a bit of work each time a row is added, removed or changed, etc... Your advise so far have been v helpful and it has helped me in redesigned the form into a different layout. So far so good...However, I just have a few more clarifications regarding some hurdles I am facing:
PS: I have emailed you a sample of my new form now so you can have a look at it.
1) Dynamic Image fields:
In this form, I have a subform that has a dropdown list and next to this, I have an image field. I want to change the image based on the selection in the dropdown list. I found a few samples and tutorials on this already and I tried 2 different approach for this. One works and the other doesnt.
Method that works: What I have done here is, I added all the images in the form and have put their presence to invisible. Then using the javascript, I am making the image visible based on the selection in the dropdown list. I found this method somewhere through googling and it works.
Method that doesnt work: Its similar to the above, but instead of putting all the images in the form, I just inserted 1 image field and then tried to change the url of this dynamic image based on the selection in the drop down list. But this method is not working. I tried inserting this jscript and nothing happens:
switch (this.rawValue)
case "1":
myImages.value.Image.href=http://www.mysiteaddress.com/blah_blah.jpg;
break;
case "2":
myImages.value.Image.href=http://www.mysiteaddress.com/blah_blah2.jpg;
break;
The 2nd method does not work. Although I know the method 1 above works and I am currently using it, I am just curious to find out why the 2nd method is not working? Did I get the script wrong or is this feature no longer allowed? I just thought that if the second method works fine, it saves the hassle of putting all the images on the form and then making them hidden. Instead, I just need to put one image field and then dynamically change its image based on the selection. I hope this make sense..please advise..
2) Changing the background colour of the Dropdown list box:
I am trying to change the bg colour of the listbox in the dropdown list object (only the listbox bg color and not the whole background color). So, I added the following script to the mouseEnter event and this works:
var vName = this.somExpression;
var fieldObj = xfa.resolveNode(vName + ".ui.#choiceList.border.fill.color");
fieldObj.value = "255,255,225";
My Problem: The above script works so I dont need to change anything there. But, I also want to add another script to the mouseExit event to change the fill color to its default once the mouse leaves the dropdown lists. Initially, this field has no fill colour and the border fill style is none. The fill color is only added during the mouseEnter event. How do I change the bg color fill back to none during mouseExit after the above script is executed on mouseEnter?
(NOTE: If you see my form, I have used the above scripts for the dropdown list only in "boxSubform[0]".)
3) Changing the length of the Dropdown List box:
I only have about 1.6 inches workspace to add this dropdown list box. However, the length of some lists (list items) in this dropdown list box is actually longer and the remaining part is cut out. So, I added the following script to increase the dropdownlist length and it does not work the way I would have hoped...
The script I have written so far:
I added these to the mouseEnter event and it works fine -
form1.pageSubform.dynamicSubform.Table1.Row1.boxSubform[0].MyDropdown::mouseEnter - (JavaScript, client)
this.w = "2in"; //this is to to increase the width of the dropdown list
I added these to the mouseExit event and it works fine too-
form1.pageSubform.dynamicSubform.Table1.Row1.boxSubform[0].MyDropdown::mouseExit - (JavaScript, client)
this.w = "1.625in";
When I tested the form with the above script, this is what happens:
1) First when you move the mouse over this field, the width increases. Similarly the width decreased when you move away.
2) So, even if this is clicked, the list box is opened with this 2inch width so thats good.
3) There are no problems when the mouse is moved over these list items as well. However, this does not look good when the dropdown list item is clicked with its item lists open and then the mouse leaves this area. In this case, as soon as the mouse leaves this area, the mouseExit script runs and hence it makes the drop down list width to shrink eventhough the list items are still open. How do I resolve this? I was thinking about this and I thought the possible way to overcome this is by writing a javascript for the mouseExit event executing something like this:
if this dropdown list is open,
then this.w = "2in";
else
this.w = "1.625in";
I am not sure how to write a jscript for the above?
(NOTE: If you see my form, I have used the above scripts for the dropdown list in "boxSubform[0]".)
4) Hiding the alternative row shadowing for hidden columns:
If you check out my form, you can notice that I have put the "close" button (button to delete table rows) on the left column and I have also put its presence to "Visible (screen only)". The parent table has got the 'alternative row shadow' checked. What I notice here is, when this page is printed, eventhough the first column's presence is set to "Visible (Screen Only)", it still prints the row shadow for this column and it looks bad. How can I fix this? Any help will be great!
I have already emailed you my new form again so you can have a look.
Thanks again Paul and I cant thank you enough for your help. I am sooo happy to see such a great support and resources available here since it can be a nightmare for some newbies like me... :-)

Unable to create LOV (Select List)

As per the dev. guide, I am trying to create a Parameterized Report. When I tried the example given in the guide it works for the sample application. But when I try for my application (based on HR data) it does not work.
The steps I am following are same as dev. guide.
a) Create a New Page
b) Create the Query Region
Here I am giving the following query :
Select e.first_name,e.last_name,e.salary,e.job_id,d.department_name
from employees e, departments d
where e.department_id = d.department_id
and ( d.department_name = :P700_SHOW or :P700_SHOW = 'ALL' )
c) Adding an Item
But here when I select an Item as "Select List" and when I move to the page "Identify List of Values", here for the field Named LOV, it does not populate with any value, like it does for the sample application.
Also if i try giving the above query in the text box (List of Values query), it does not allow me to move ahead and throws follo. error:
" LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query."
Can some help me on this? And also I am not able to understand, that for this exercise (parameterized report) why they have taken only sample application and not helped the dev. to create its own.

Hi,
You need to set up a "Named LOV" - go to Shared Components=>Lists of Values to create a LOV for the departments. This should be a "Dynamic" LOV, using the following SQL:
select department_name d, department_id r
from departments
order by 1
Give it a name like "DEPTS_LOV" and this will then be available for your select list.
Regards
Andy

Unable to create webservice from EJB due to wrong wizard configuration

Hi All,
       I was trying to create a webservice from a EJB(session bean).I executed following steps :
1. I created the bean in one EJB project.
2. Then created another Enterprise Project in whichEJB projects .jar file is included.
3. Now when i right click "ejb-jar.xml" to create a webservice ,webservice wizard
   appears in which Server and WS runtime configuration are set properly.
   But it displays following error message on the top : "Select a service Project Type".
   If i click on the link on the wizard to select a "service Project type" the drop down for the same comes empty.The value for 'Service Project' is already defaulted
as "Webservice Project ".If i go to windows->preferrences->Webservcies->ProjectTopology i found two entries in the service project type list :
                     1.Dynamic Web project
                     2.SAP Web Project
     But there is no entry for Webservice Type project.Can any one help me out
how to solve this issue ?
Thanks and Regards
Ashis

Hi
<a href="/people/baris.buyuktanir2/blog/2007/02/12/how-to-create-dynamic-configurable-web-services-easily-with-netweaver-development-components-part-i 1</a>
<a href="/people/baris.buyuktanir2/blog/2007/02/12/how-to-create-dynamic-configurable-web-services-easily-with-netweaver-development-components-part-ii 2</a>
Regards
Abhijith Ys

Unable to create customers in ECC due to DEBITOR_BDCDATA

Hi Gurus,
We have a requirement to create customers in ECC (ECC 6.0 EhP4) from CRM (CRM 7.0 SP4) Business Partners. The issue is BDoc is failing with error"Fill in required fields". I am posting in this forum as my issue is on the inbound/posting side of process.
Analysis:
The data is getting posted via ALE where FM IDOC_INPUT_DEBITOR is called. On debugging I found that system is doing a BDC to transaction XD01 and the BDC screen sequence is generated by a function DEBITOR_BDCDATA. This function is not generating the screen data for mandatory address fields and hence this error.
On further analysis I found that system checks if you have central address management (BAS) active and if yes it skips that part of code which is responsible to generate screen sequence for address fields. This is due to that fact that system has already posted the address data and issued an address number before moving to FM DEBITOR_BDCDATA (ALE serialization where address should be posted before customer/vendor master data).
The serialization concept is fine to me however the issue is how do we generate the skipped address fields here to post the customer. I did find a BADI to implement custom screen data in internal table FT[] but I am not sure if I should use it as posting ECC customer is supposed to be a standard SAP behavior and there might be something I am missing here.
Has anyone tried this scenario before? Any ideas on this?
Thanks for looking into my thread.
Cheers,
Ankur

Hello Ankyur,
very briefly thinking, if your bdoc do fails because a required field is not populated, this is logically because the field is not populated !!
Do populate it and this will solves your issue.
Yes the bDoc integration do insert the address data prior the virtual DEBMAS idoc gets processed. And yes, this address integration does not check any required fields.
This will be done during DEBMAS integration.
I would not recommand that you implement BAdI CUSTOMER_ADD_DATA_BI for such purpose.
This should be solved eiither within CRM : CRM must ensure the data sent to ECC are correct and complete.
Or ECC, must have less fields mandatory.
In other words, both systems must have the same required fields
As an advise, do not implement DE_BALE event for such purpose, this will create more mess as this is integrated after address integration and before DEBMAS. It always results in errors...
Hope this helped
Alain

Unable to create a production order due to error: "CX_SLD_API_EXCEPTION"

Hello,
I am a student and fairly new to SAP.
I could convert planned order to Production order (Using transaction MD04).
While trying to release the order, and saving the change, I am getting a runtime error.
Surprisingly, same exercise was performed with no errors by previous batch.
The details of the error are as follows:
What happened?
The exception 'CX_SLD_API_EXCEPTION' was raised, but it was not caught anywhere
along the call hierarchy.
Kindly help me to solve this problem.
Thank you.

Dear,
Get Help of your ABAPer to analyse it. Also will suggest you to refer SAP note.
Note 832674 - Short dump due to uncaught exception
Note 1287982 - SMSY: Terminatn UNCAUGHT_EXCEPTION for data transf from SLD
Regards
Abhijit Gautam

Unable to Create PO for a Vendor with Particular payment terms

Hi All,
we have a scenarion in SRM 7.0 system where the PO is ending up in error in SRM for a vendor. In BBP_PD the error message says "Enter payt terms" " enter GR Non Valuated".
Now in my SRM system i can see the PO has got the payment terms and PO is for single account assignment. i have generated the BAPI data for the BAPI_PO_CREATE1 and can confirm the erro is coming form backend and in the bapi the paymnet terms is correctly passed in the header record.
I am not sure why this error from backend.. have anyone encountered similar issue.
anything to check with paymet terms in backed. i have another payment terms working and few of them are not working.
cheers
Iftekhar Alam.

Note 1350184 - Payment terms from PO not transferred to backend
BBP_PDHGP-PMNTTRMS
Check payment term is available
Have you creted this payterm from SRM or pulled from ECC ?
Note 1350185 - Payment terms from PO not transferred to backend
check each data in BBP_PAYTERM in the value and match with ecc payterm table. some times some conditions are misinterupted in SRM
for ex.
Muthu

Getting error "Unable to create boot loader partition due to the specifics of your partition map layout."

I'm getting this when erasing an external hard drive using the journaled encrypted file format.

I'm getting a similar problem. https://discussions.apple.com/message/15783265
-Rob

Problem in activating change lists

hello every one,
here i am new to XI. i am doing some R&D regarding the activation of IR objects. At first i can see all the objects including the software component version created under one standard change list. i just tried to activate the software component alone. on the next second it created another change list giving some error. please any one guide me how to overcome this problem.

When you add name space into your software component version, you have to activate three objects first:
The Modified SWCV
Two default fault data types.
If you do not do above first, then you created other objects, you won't be able to activate all of them once.
You still need to select three object I mentioned in the list, activate them first, then activate other objects later.
Hope it helps.
Liang

Zen Xtra unable to create new or update playli

I am unable to create new play lists on my Zen Xtra. When I use the Zen itself, it looks like it creates the playlist but when I open it, the Zen screens draws a box and prints "error" in the box. Using Nomad explorer, it creates the list, I can add to it, delete from it, and it appears to work in every way but when I try to open it on the Zen, I get the little box and the word "error" in it. I tried taking an existing playlist, removing all the titles, add title to the playlist and I get the same eror message. I have run the clean up disk from the utilities menu on the Zen. I have also upgraded to the latest firmware version. Other than the error on the play list, the unit works perfectly.
Any suggestions?
Thanks
Randy

Does this player have an upgraded hard disk?
Either way, how many tracks are on the player?

Unable to create opportunity CRM

Hi,
one User unable to create opportunity in CRM.That tab came as disable for that only perticuler user.
Regards'
Kumar

Hi Kumar,
As mentioned by Gobi, please check the PFCG role and also run the trace with the help of basis colleague to check the missing authorizations.
Hope this will be helpful.
Regards
DJ

[ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null

Similar Messages

Maybe you are looking for