Unable to create FXMLLoader controller reference: 'no suitable constructor'

Greetings,
I am in my first couple of days experimenting with JavaFX.
I am trying to create a reference to my controller class from within my application start routine. All the posts that I have seen on this call for code such as the following:
FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("MyFXML.fxml")); But in my NetBeans IDE editor this code signals the error 'no suitable constructor found for FXMLLoader(java.net.URL)'
The FXMLLoader Class documentation clearly includes a FXMLLoader(java.net.URL) constructor. However, when I navigate to the source code from NetBeans, this constructor doesn't show: the only options are FXMLLoader() and FXMLLoader(Charset arg0).
I am using NetBeans 7.1.2 ee version. I was using JavaFX 2.0, then downloaded the JavaFX 2.2 SDK (beta) to see if this would make a difference -- it hasn't.
Any ideas would be much appreciated.

Hi,
My guess would be that NetBeans is still picking up the JavaFX 2.0 jars instead of JavaFX 2.2
I would suggest playing with your project's properties: look at the library dependencies, and at the platform.
If it's using a Default_JavaFX_Platform then check where it picks up JavaFX (click on "manage platform" and look in the JavaFX tab).
Sometimes NetBeans is confused and will pick up the SDK 2.2 with the runtime 2.0 - so really check all the paths!
Hopes this helps,
-- daniel
Edited by: daniel on Jun 13, 2012 6:18 AM

Similar Messages

  • Unable to create PO with reference to sales order

    Hi All,
    While creating a PO with reference to sales order, we are getting an error message as below
    "Error while determining local currency exchange rate type AB45 date 30.06.2010 from EUR to SEK"
    In T.code: OB08, We observed that exchange rates have been maintained for the above combination
    i.e. AB45 is a exchange rate key for our customer.
    exchange entries have been already maintained in OB08,
    Please suggest a solution to resolve this issue.
    Regards,
    Prasad

    Hello,
    While creating a PO with reference to sales order, we are getting an error message as below
    "Error while determining local currency exchange rate type AB45 date 30.06.2010 from EUR to SEK"
    In T.code: OB08, We observed that exchange rates have been maintained for the above combination
    i.e. AB45 is a exchange rate key for our customer. exchange entries have been already maintained in OB08,
    Please suggest a solution to resolve this issue.
    Since you have maintained the setting in OB08, please refer to below link which has the same subject matter.
    [HELP LINK !!|Error determining local currency]
    Regards,
    Sarthak

  • Unable to create delivery with reference to STO

    Hi,
    Facing this error while creating del with ref to the STO.
    Configured the following:
    maintained shipping data for both receiving and supplying plants
    shipping point dertermination
    material extended to the sales area
    Document is incomplete: You cannot save the delivery
    When the system checked whether saving delivery was permitted, it determined that the requirements stored in Define Incompletion Procedures for this document do not allow this subsequent function.
    Please suggest
    regards
    Joseph

    Hi,
    Please check for master data - Vendor master of supplying plant for receving plants purchasing organisation and also supplying plant in additional data in purchasing tab in vendor master
    Customer master for supplier's sales organisation
    Check if shipping point, ship to party / customer, delivery type picked in sto properly
    Check for the STO set up in SPRO
    Delivery type assignment for supplying plant
    if everything is ok, Create delivery in VL10B for sto, if it errors, check for log clicking on log icon
    give error description
    Regds

  • Unable to create reference: org.omg.CORBA.OBJ_ADAPTER

    What is causing this error? I believe it is a configuration error, but I cannot discern what it is.
    Setup:
    I have two beans: a User entity bean, and a UserWrapper stateful session bean.
    Execution:
    My testing client-code looks up the UserWrapper EJB and creates a new object. In the UserWrapper ejbCreate method I am attempting to obtain a reference to a specific User by looking up the User EJB and calling its findByPrimaryKey method.
    Everything works fine right up until the UserWrapper.ejbCreate method is ready to close; I catch this exception:
    RemoteException occurred in server thread; nested exception is:
    java.rmi.RemoteException: nested exception is: java.lang.RuntimeException:
    Unable to create reference org.omg.CORBA.OBJ_ADAPTER: vmcid: SUN minor code: 1015 completed: No;
    Observations:
    User.ejbFindByPrimaryKey(UserPK pk) is NOT throwing ANY EXCEPTIONS! The error is passed to UserWrapper.ejbCreate from the container, or so it seems, but I am relatively positive it is not orginiating from the finder method. At this time the User.ejbFindByPrimaryKey method only returns the primary key object.
    UserWrapper.ejbCreate code:
    public void ejbCreate(String usrnm, String pswrd) throws CreateException {
      // instance variables
      UserHome userHome = null;
      // implementation
      try {
        // obtain an instance of the EJBHomeFactory and have it return an
        // instance of the UserHome interface
        userHome = (UserHome)EJBHomeFactory.getInstance().lookup(
            "ejb/User", net.cmpro.app.entity.user.UserHome.class);
        // request the container supply a User object for the specified
        // primary key object
        this.user = userHome.findByPrimaryKey(new UserPK(usrnm, pswrd));
      catch(FinderException e) {
        throw new CreateException(e.toString());
      catch(RemoteException e) {
        throw new EJBException(e.toString(), e);
    }Need a little help here. I'm getting very frustrated because I've never had this problem before.
    Thanks for any advice, no matter how off the wall it is.

    Yes, it is. This returns an EJBHome object from a cache. I picked this up from the IBM website. It is very handy. The method in question is as follows:
    public EJBHome lookup(String jndi, Class home) throws EJBException {
      // instance variables
      EJBHome ejbHome = null;
      Object obj = null;
      // implementation
      try {
        // looks for the interface in the collection by class
        ejbHome = (EJBHome)interfaces.get(home);
        if(ejbHome == null) {
          // looks up the interface by its JNDI name
          obj = context.lookup(jndi);
          // casts the returned object into the interface desired
          ejbHome = (EJBHome)PortableRemoteObject.narrow(obj, home);
          // put the newly retreived interface into the collection and
          // list it by its class      never use the interfaces JNDI name
          // because a single EJB object could have multiple JNDI names
          interfaces.put(home, ejbHome);
      catch(ClassCastException e) {
        throw new EJBException(e.toString());
      catch(NamingException e) {
        throw new EJBException(e.toString(true), e);
      return ejbHome;
    }

  • Unable to create reference-org.omg.CORBA.OBJ_ADAPTER(Session- BMPEntityEJB)

    Hi All
    I am having following senerio with Sun One Application Server 7 on Win 2000.
    UserRegistrationBean (Java Client) -> RegistrationBean (Session EJB) -> UserBean (Entity EJB)
    The Java Client lookup and invokes Session EJB. It works fine.
    Further, when the Session EJB calls the Entity EJB I get the following exception.
    SEVERE: IOP5013: Unable to create reference: [org.omg.CORBA.OBJ_ADAPTER:   vmcid: SUN  minor code: 1015  completed: No]SEVERE: EJB5029: Exception getting ejb context : [UserBean]
    SEVERE:
    SEVERE: IOP5012: Some runtime exception ocurred in IIOP: [javax.ejb.EJBException: nested exception is: java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ_ADAPTER:   vmcid: SUN  minor code: 1015  completed: No]
    Any idea what could be wrong?
    Thanks for the help.
    Regards
    Satish

    Make sure PrimaryKey class for entity has the equals
    and hashcode methods implemented right.
    You've to ensure that hashCode generated is
    the same everytime for same primaryKey
    and you do the right comparison for the
    equals method.
    HTH
    -hima

  • Unable to create IDOCs after client copy

    I'm unable to create IDOCs after a client copy.  I receive a SAPSQL_ARRAY_INSERT_DUPREC or insert of duplicate rows ABAP dump.
    Does anyone know what how to fix this.  Thank you in advance.
    Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
    Except.                CX_SY_OPEN_SQL_DB
    Date and Time          22.10.2007 16:50:51
    ShrtText
    The ABAP/4 Open SQL array insert results in duplicate database records.
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLEDI1" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "F09_IDOC_INSERT_WITH_NUMBER" "(FORM)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    How to correct the error
    Use an ABAP/4 Open SQL array insert only if you are sure that none of
    the records passed already exists in the database.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
    "SAPLEDI1" or "LEDI1F09"
    "F09_IDOC_INSERT_WITH_NUMBER"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
    To obtain this, select in the current display "System->List->
    Save->Local File (unconverted)".
    2. A suitable printout of the system log
    To obtain this, call the system log through transaction SM21.
    Limit the time interval to 10 minutes before and 5 minutes
    after the short dump. In the display, then select the function
    "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
    The exception must either be prevented, caught within the procedure
    "F09_IDOC_INSERT_WITH_NUMBER"
    "(FORM)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    System environment
    SAP Release.............. "640"
    Application server....... "auaplxr3q"
    Network address.......... "128.197.135.5"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "000B439ED600"
    Character length......... 8 Bits
    Pointer length........... 64 Bits
    Work process number...... 1
    Short dump setting....... "full"
    Database server.......... "auaplxr3q"
    Database type............ "ORACLE"
    Database name............ "Q63"
    Database owner........... "SAPR3"
    Character set............ "en_US.ISO8859-1"
    SAP kernel............... "640"
    Created on............... "Mar 22 2007 20:48:46"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
    Patch level.............. "175"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
    10.2.0.."
    SAP database version..... "640"
    Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
    Memory usage.............
    Roll..................... 16128
    EM....................... 4189928
    Heap..................... 0
    Page..................... 0
    MM Used.................. 1469352
    MM Free.................. 2718056
    SAP Release.............. "640"
    User and Transaction
    Information on where terminated
    The termination occurred in the ABAP program "SAPLEDI1" in
    "F09_IDOC_INSERT_WITH_NUMBER".
    The main program was "SAPMSSY1 ".
    The termination occurred in line 108 of the source code of the (Include)
    program "LEDI1F09"
    of the source code of program "LEDI1F09" (when calling the editor 1080).
    Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
    the
    procedure "F09_IDOC_INSERT_WITH_NUMBER" "(FORM)" but was not handled locally,
    not declared in the
    RAISING clause of the procedure.
    The procedure is in the program "SAPLEDI1 ". Its source code starts in line 5
    of the (Include) program "LEDI1F09 ".
    Source Code Extract
    Line
    SourceCde
    78
    perform call_badi tables list_container_insert
    79
    using  control
    80
    ident.
    81
    Aufruf des Badi's für das einstreuen neuer Segmente
    82
    perform call_insert_badi tables list_container_insert
    83
    using control
    84
    ident
    85
    changing maxsegnum.
    86
    87
       free list_container_insert
    88
    FREE_RETURN = 1.
    89
    ELSE. " no other IDoc is open in create-mode
    90
    LOOP AT LIST_CONTAINER_CREATE WHERE MANDT EQ SY-MANDT
    91
    AND   DOCNUM EQ IDENT.
    92
    LIST_CONTAINER_CREATE-DOCNUM = DOCNUM.
    93
    MODIFY LIST_CONTAINER_CREATE.
    94
    ADD 1 TO MAXSEGNUM.
    95
    ENDLOOP.
    96
    if control-mestyp eq c_mestyp.
    97
    CALL FUNCTION 'FUNCTION_EXISTS'
    98
    EXPORTING
    99
    funcname           = c_func
    100
    EXCEPTIONS
    101
    FUNCTION_NOT_EXIST = 1.
    102
    IF syst-subrc IS INITIAL.  "Anwendungssystem
    103
    perform call_transform
    104
    tables list_container_create
    105
    using  control.
    106
    ENDIF.
    107
    endif.
    >>>>>
    INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE.
    109
    Aufruf des Badi's für das Anwendungsmapping einzelner Felder
    110
    perform call_badi tables list_container_create
    111
    using  control
    112
    ident.
    113
    perform call_insert_badi tables list_container_create
    114
    using  control
    115
    ident
    116
    changing maxsegnum.
    117
    118
      free list_container_create
    119
    FREE_RETURN = 0.
    120
    ENDIF.
    121
    122
    insert status records
    123
    124
    SYN_ERROR_IN = ' '.
    125
    CNTR_STATUS = 0.
    126
    REFRESH LIST_STATUS.
    127
    CLEAR LIST_STATUS.
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    2
    SY-TABIX
    1
    SY-DBCNT
    1
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    CPIC and RFC Control
    SY-MSGTY
    SY-MSGID
    SY-MSGNO
    000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    13 FORM         SAPLEDI1                            LEDI1F09                              108
    F09_IDOC_INSERT_WITH_NUMBER
    12 FUNCTION     SAPLEDI1                            LEDI1U19                               33
    EDI_DOCUMENT_CLOSE_CREATE_TAB
    11 FUNCTION     SAPLEDIR                            LEDIRU01                              273
    IDOC_INBOUND_WRITE_TO_DB
    10 FORM         SAPLEDIN                            LEDINF01                              457
    ONE_IDOC_STORE
    9 FUNCTION     SAPLEDIN                            LEDINU05                              234
    IDOC_INBOUND_ASYNCHRONOUS
    8 FORM         SAPLEDIN                            LEDINV05                               19
    IDOC_INBOUND_ASYNCHRONOUS
    7 FORM         SAPMSSY1                            SAPMSSY1                              254
    XAB_RUN_DRIVER
    6 FUNCTION     SAPLSXAB                            LSXABU01                                9
    RFC_RUN_XAB_DRIVER
    5 FUNCTION     SAPLERFC                            LERFCU01                               59
    ARFC_EXECUTE
    4 FUNCTION     SAPLERFC                            LERFCU02                              229
    ARFC_DEST_SHIP
    3 FORM         SAPLERFC                            LERFCV02                               28
    ARFC_DEST_SHIP
    2 FORM         SAPMSSY1                            SAPMSSY1                               69
    REMOTE_FUNCTION_CALL
    1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
    %_RFC_START
    Chosen variables
    Name
    Val.
    No.      13 Ty.          FORM
    Name  F09_IDOC_INSERT_WITH_NUMBER
    CONTROL-MESTYP
    USERCLONE
    554544444222222222222222222222
    53523CFE5000000000000000000000
    C_MESTYP
    FIDCCH
    444444222222222222222222222222
    694338000000000000000000000000
    SY-XFORM
    IDOC_INBOUND_ASYNCHRONOUS
    444454444544545544454445522222
    94F3F9E2F5E4F139E382FEF5300000
    LIST_STATUS-STAPA2
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    C_FUNC
    IDOC_TRANSFORM
    444455544544542222222222222222
    94F3F421E36F2D0000000000000000
    SYST-REPID
    SAPLEDI1
    5454444322222222222222222222222222222222
    310C549100000000000000000000000000000000
    SY-UNAME
    Q63CLNT140
    533444533322
    1633CE414000
    %_DUMMY$$
    2222
    0000
    SY-MSGV1
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    SYST-SUBRC
    0
    0000
    0000
    ALE_IDOC_TO_APL_OK
    62
    33
    62
    LIST_CONTAINER_CREATE[]
    Table IT_20[9x1068]
    FUNCTION-POOL=EDI1DATA=LIST_CONTAINER_CREATE[]
    Table reference: 14
    TABH+  0(20) = 070000008036F5B8000000000000000000000000
    TABH+ 20(20) = 0000000E00000014000000090000042CFFFFFFFF
    TABH+ 40(16) = 0400002300000CA0000824C401000000
    store        = 0x070000008036F5B8
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 14    (0x0000000E)
    label        = 20    (0x00000014)
    fill         = 9     (0x00000009)
    leng         = 1068  (0x0000042C)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000048
    occu         = 8     (0x00000008)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 1
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x070000008036F610
    pghook       = 0x07000000802D86D0
    idxPtr       = 0x0000000000000000
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x00000010)
    lineAlloc    = 16    (0x00000010)
    store_id     = 23    (0x00000017)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    hsdir        = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    LIST_CONTAINER_CREATE
    1400000000000511747000000009E1BPADRML                     00000002#èXD63        070TST_QA140_1
    3333333333333333333333333333434544544222222222222222222222333333330E54332222222233355555433353
    14000000000005117470000000095120142DC0000000000000000000000000000238846300000000070434F11140F1
    CONTROL
    1400000000000511747640 64        2SAPQ63    LSQ63CLNT140
    3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
    14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
    G_MAXSYNERR
    1
    0000
    0001
    <%_TABLE_EDID4>
    ALE_DISPATCH_ERROR
    27
    33
    27
    ALE_IDOC_READY_FOR_APL
    64
    33
    64
    %_SPACE
    2
    0
    IDENT
    0000000000000001
    3333333333333333
    0000000000000001
    ALE_IDOC_TO_APL_ERROR
    63
    33
    63
    No.      12 Ty.          FUNCTION
    Name  EDI_DOCUMENT_CLOSE_CREATE_TAB
    IDENTIFIER
    0000000000000001
    3333333333333333
    0000000000000001
    NO_DEQUEUE
    X
    5
    8
    SYN_ACTIVE
    Y
    5
    9
    IDOC_CONTROL
    1400000000000511747640 64        2SAPQ63    LSQ63CLNT140
    3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
    14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
    SYNTAX_RETURN
    0
    0000
    0000
    INT_EDIDD[]
    Table IT_10[9x1062]
    FUNCTION-POOL=EDINDATA=G_T_DATA_RECORDS[]
    Table reference: 9
    TABH+  0(20) = 0700000080284B80070000008028530800000000
    TABH+ 20(20) = 000000090000000A0000000900000426FFFFFFFF
    TABH+ 40(16) = 0400000900000AA8000824C401000000
    store        = 0x0700000080284B80
    ext1         = 0x0700000080285308
    shmId        = 0     (0x00000000)
    id           = 9     (0x00000009)
    label        = 10    (0x0000000A)
    fill         = 9     (0x00000009)
    leng         = 1062  (0x00000426)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000039
    occu         = 8     (0x00000008)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 1
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x0700000080320D90
    pghook       = 0x07000000802E1508
    idxPtr       = 0x0000000000000000
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x00000010)
    lineAlloc    = 16    (0x00000010)
    store_id     = 17    (0x00000011)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x0000000000000000
    hsdir        = 0x0000000000000000
    ext2         = 0x07000000802852A8
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0x0700000080284B30
    delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x0000000000000000
    pb_handle    = 0x0000000000000000
    NO_IGNORE
    2
    0
    EDI_IDOC_SYNTAX_ERROR_IN
    60
    33
    60
    DOCNUM
    0000000000511747
    3333333333333333
    0000000000511747
    EXCLUSIVE
    E
    4
    5
    SYNCHRONOUS
    S
    5
    3
    APL_TESTIDOC_CHECK_OK
    55
    33
    55
    FREE_RETURN
    0
    0000
    0000
    INT_EDIDD
    1400000000000000001000009E1BPADRML                  00000000##XD63        070TST_QA140_17  X00
    3333333333333333333333333434544544222222222222222222333333330054332222222233355555433353322533
    14000000000000000010000095120142DC0000000000000000000000000000846300000000070434F11140F1700800
    SUB_INT_ACK_POSITIVE
    14
    33
    14
    G_INSERT_OK
    2
    0
    LIST_CONTAINER_INSERT_TMP[]
    Table[initial]
    LIST_CONTAINER_INSERT_TMP
    0000000000000000000000000                              00000000##
    2223333333333333333333333333222222222222222222222222222222333333330022222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    %_ARCHIVE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    No.      11 Ty.          FUNCTION
    Name  IDOC_INBOUND_WRITE_TO_DB
    PI_DO_HANDLE_ERROR
    X
    5
    8
    PI_NO_DEQUEUE
    X
    5
    8
    PI_RETURN_DATA_FLAG
    X
    5
    8
    PI_RFC_MULTI_CP
    0000
    3333
    0000
    PI_STATUS_MESSAGE
    000000000000000000000000000000000000000000000000000000000000
    2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    PE_IDOC_NUMBER
    0000000000000001
    3333333333333333
    0000000000000001
    PE_INBOUND_PROCESS_DATA
    140BAPI                                                  6
    3334454222222222222222222222222222222222222222222222222223222222222222222222222222222222222222
    1402109000000000000000000000000000000000000000000000000006000000000000000000000000000000000000
    PE_STATE_OF_PROCESSING
    0
    0000
    0000
    T_DATA_RECORDS[]
    Table IT_10[9x1062]
    T_LINKED_OBJECTS[]
    Table IT_11[0x100]
    FUNCTION-POOL=EDINFORM=ONE_IDOC_STOREDATA=LT_LINKED_OBJECTS[]
    Table reference: 10
    TABH+  0(20) = 000000000000000007000000802853F000000000
    TABH+ 20(20) = 0000000A0000000B0000000000000064FFFFFFFF
    TABH+ 40(16) = 0400000900002BB00010249401000000
    store        = 0x0000000000000000
    ext1         = 0x07000000802853F0
    shmId        = 0     (0x00000000)
    id           = 10    (0x0000000A)
    label        = 11    (0x0000000B)
    fill         = 0     (0x00000000)
    leng         = 100   (0x00000064)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000190
    occu         = 16    (0x00000010)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = Not allocated
    pghook       = Not allocated
    idxPtr       = Not allocated
    refCount     = Not allocated
    tstRefCount  = Not allocated
    lineAdmin    = Not allocated
    lineAlloc    = Not allocated
    store_id     = Not allocated
    shmIsReadOnly = Not allocated
    >>>>> 1st level extension part <<<<<
    regHook      = 0x0000000000000000
    hsdir        = 0x0000000000000000
    ext2         = 0x0700000080285390
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0x0700000080285340
    delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x0000000000000000
    pb_handle    = 0x0000000000000000
    PC_CONTROL_RECORD
    1400000000000000000    30        2          LSQ63CLNT140
    3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
    14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
    %_VIASELSCR
    0
    4
    %_SPACE
    2
    0
    L_STATUS
    64
    33
    64
    L_ALE_SUCCESS_MESSAGE
    B1                  S005                                                  No filters
    4322222222222222222253332222222222222222222222222222222222222222222222222246266676772222222222
    21000000000000000000300500000000000000000000000000000000000000000000000000EF069C45230000000000
    ST_PREVIOUS_PARTNER_DATA-SYNCHK
    X
    5
    8
    C_TRUE
    X
    5
    8
    SYST-REPID
    SAPLEDIR
    5454444522222222222222222222222222222222
    310C549200000000000000000000000000000000
    C_ELEMENT_UNPROCESSED_IDOCS
    Unprocessed_IDocs
    56776667766544667222222222222222
    5E02F353354F94F33000000000000000
    ST_PREVIOUS_STATE_OF_PROCE
    0
    0000
    0000
    ST_INBOUND_PROCESS_DATA-EDIVR2
    6
    3
    6
    SY-MSGV4
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    L_SYN_ACTIVE
    Y
    5
    9
    SY-XFORM
    IDOC_INBOUND_ASYNCHRONOUS
    444454444544545544454445522222
    94F3F9E2F5E4F139E382FEF5300000
    L_SYNTAX_RETURN
    0
    0000
    0000
    %_DUMMY$$
    2222
    0000
    SY-REPID
    SAPLEDIR
    5454444522222222222222222222222222222222
    310C549200000000000000000000000000000000
    No.      10 Ty.          FORM
    Name  ONE_IDOC_STORE
    IDOC_NUMBER_IN
    0000000000000000
    3333333333333333
    0000000000000000
    STATE_OF_PROCESSING_IN
    0
    0000
    0000
    INBOUND_PROCESS_DATA_IN
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    GT_NEW_IDOC_IDENTIFICATIONS[]
    Table[initial]
    G_LAST_IDOC_NUMBER
    0000000000000000
    3333333333333333
    0000000000000000
    SYST-REPID
    SAPLEDIN
    5454444422222222222222222222222222222222
    310C549E00000000000000000000000000000000
    CURRENT_CONTROL_RECORD_IN-DOCNUM
    0000000000000000
    3333333333333333
    0000000000000000
    CONV_ERROR
    2
    0
    C_TRUE
    X
    5
    8
    SY
    0000000000000000000000000000000000000000000000000000000000000000000000000000000200000000000000
    0002000000010009000000000000000000000000000100000001000000010000000000000000004C00000000000000
    STATUS_MESSAGE_IN
    000000000000000000000000000000000000000000000000000000000000
    2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    C_IDOC_SELECT_AND_WRITE_TO_DB
    5
    3
    5
    SY-REPID
    SAPLEDIN
    5454444422222222222222222222222222222222
    310C549E00000000000000000000000000000000
    STATUS_MESSAGE_IN-STAMID
    22222222222222222222
    00000000000000000000
    GT_NEW_IDOC_IDENTIFICATIONS
    0000000000000000
    3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SPACE
    2
    0
    STATUS_MESSAGE_IN-STAMNO
    000
    333
    000
    RET_FLAG
    X
    5
    8
    G_RFC_CODEPAGE
    0000
    3333
    0000
    RSJOBINFO-JOBSUBRC
    0
    0000
    0000
    SY-XFORM
    IDOC_INBOUND_ASYNCHRONOUS
    444454444544545544454445522222
    94F3F9E2F5E4F139E382FEF5300000
    SY-LANGU
    E
    4
    5
    G_T_DATA_RECORDS[]
    Table IT_10[9x1062]
    LT_LINKED_OBJECTS[]
    Table IT_11[0x100]
    CURRENT_CONTROL_RECORD_IN
    1400000000000000000    30        2          LSQ63CLNT140
    3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
    14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
    %_DUMMY$$
    2222
    0000
    SWO_%OBJID
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    No.       9 Ty.          FUNCTION
    Name  IDOC_INBOUND_ASYNCHRONOUS
    IDOC_CONTROL_REC_40[]
    Table IT_3[1x524]
    FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_CONTROL_REC_40[]
    Table reference: 3
    TABH+  0(20) = 07000000802D876007000000802D449000000000
    TABH+ 20(20) = 0000000300000003000000010000020C000000E0
    TABH+ 40(16) = 0400000900001FE0000A249001000000
    store        = 0x07000000802D8760
    ext1         = 0x07000000802D4490
    shmId        = 0     (0x00000000)
    id           = 3     (0x00000003)
    label        = 3     (0x00000003)
    fill         = 1     (0x00000001)
    leng         = 524   (0x0000020C)
    loop         = 224   (0x000000E0)
    xtyp         = TYPE#000136
    occu         = 10    (0x0000000A)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 0
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x07000000802DB9D8
    pghook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 10    (0x0000000A)
    lineAlloc    = 10    (0x0000000A)
    store_id     = 9     (0x00000009)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x0000000000000000
    hsdir        = 0x0000000000000000
    ext2         = 0x07000000802D88A0
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0x07000000802D8710
    delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x0000000000000000
    pb_handle    = 0x0000000000000000
    IDOC_DATA_REC_40[]
    Table IT_4[9x1063]
    FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_DATA_REC_40[]
    Table reference: 4
    TABH+  0(20) = 07000000802D880807000000802D896000000000
    TABH+ 20(20) = 00000004000000040000000900000427FFFFFFFF
    TABH+ 40(16) = 04000009000020500008249001000000
    store        = 0x07000000802D8808
    ext1         = 0x07000000802D8960
    shmId        = 0     (0x00000000)
    id           = 4     (0x00000004)
    label        = 4     (0x00000004)
    fill         = 9     (0x00000009)
    leng         = 1063  (0x00000427)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000138
    occu         = 8     (0x00000008)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 0
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x07000000802E1550
    pghook       = 0x07000000802D8860
    idxPtr       = 0x0000000000000000
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x00000010)
    lineAlloc    = 16    (0x00000010)
    store_id     = 12    (0x0000000C)
    shmIsReadOnly = 0     (0x

    Hi Rohan,
    Welcome to SDN!
    This error means that you're trying to duplicate a record on the DB... check the IDOC  number ranges... it might help
    Regards
    Juan
    Please reward with points if helpful

  • Unable to Load Database/Unable to create database.

    RoboHelp 6.0 on my PC is suddenly unable to open existing
    projects or create new ones. The problem is not in the projects, as
    other people can unzip the same set of files and open them with
    RoboHelp on their PCs.
    The Details:
    When attempting to open an existing project (any project
    whether in version control or not), I get the message " Open
    project was cancelled or the application was unable to load
    database for..."
    I found the article that says to delete the CPD and XPJ files
    and then to use the Edit option to open the HHP file so that
    RoboHelp will recreate the two files. When I try that, I get the
    message "Unable to create database. Check that the directory is not
    read-only." It's
    not read-only.
    When I attempt to create a new project, the application acts
    like it is going to create one, but it just creates a project
    folder without the new first topic and then repeats the New Project
    Wizard window that prompts for title, etc. It will keep creating
    folders and returning to this window in a loop without ever really
    creating a project.
    RoboSource Control is functioning normally, by the way.
    I have uninstalled and reinstalled RH 6 several times, and
    have even uninstalled RH 6 and installed to RH 5 just to see if it
    could open projects, which it does with no problems. After that
    test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
    the same problem all over again.
    This started happening after I uninstalled other unrelated
    software and received a message that some Service Pack 2 files had
    been changed and prompting me to insert the Service Pack 2 CD,
    which I don't have. This is because our IT department pre-builds
    our systems from an image and then distributes job-specific
    applications over the network. IT tried repairing Service Pack 2,
    but that didn't work. I'd like to uninstall and reinstall Service
    Pack 2, but the IT person says it's too risky on a system that was
    built from an image.
    We would like to find out
    which files RoboHelp is looking for when it launches a
    project so we can replace those files manually. Does anyone
    know what they are or have another suggestion that might fix the
    problem?
    Otherwise, I am stuck having to allow IT to rebuild my
    system. That means reinstalling and reconfiguring everything on it,
    just as if I were upgrading to a new PC. This can take a whole work
    week. However, I have already spent close to a work week on this
    problem, so maybe rebuilding would save time in the long
    run.

    Problem Resolution = HHA.dll
    For anyone who might be interested in the resolution to this
    issue, we did rebuild my PC and reinstall all of my software. The
    RoboHelp installation "complained" that I did not have HTML Help
    Workshop on my system and told me to download version 1.4 from
    Microsoft. I did have HTML Help Workshop..it's in my programs list.
    (It's not listed in programs on my co-workers' PCs, and they were
    not having problems, by the way.) But to make RH happy, I
    uninstalled the workshop and tried to install the version from
    Microsoft. But a message informed me that I already had a newer
    version of the workshop on my system, and I was back where I
    started. I could open projects, but there were weird problems.
    Selecting Topic Properties was met with an error message, and when
    the properties window opened, I could only see whatever template
    was assigned (or none if the topic had lost its template), and
    there was an extra section for Oracle help.
    So I started dinking around in the registry to see if I could
    get rid of any traces of the workshop so I could install the
    version RH wanted or to find any other clues to my problem. Under
    HTMLHelpAuthor, there was a reference to an HHA.dll file located in
    C:\WINDOWS\system32...only the file did not exist on my system.
    (Remember that my original problem was that some Service Pack 2
    files were either modified or missing.) So I did a Google search on
    that file name and found out that HTML Help Workshop is included in
    newer Windows operating systems, but that people used to have to
    get HTML Help Workshop from Microsoft, and that some people had
    made the mistake of just putting the HHA.dll file into the
    C:WINDOWS\system32 folder without also installing HTML Help
    Workshop. At this point it was obvious that I needed the HHA.dll,
    so I got it from a co-worker's PC. (Looking at the registry
    entries, I can also see that my system was built with a slightly
    different version of the operating system than my co-workers have.)
    Adding the HHA file to my system solved the problem. All
    projects but one were fine; one was still exhibiting the strange
    behavior. I fixed it by going back to the RoboHelp 5 version of the
    project and re-converting it to RoboHelp 6.
    I suspect that if I had known about the HHA.dll file before
    we rebuilt the PC, I could have solved the problem without going
    through that painful process. That is why I thought I should post
    the solution even though it was after the rebuild.

  • After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

    We recently upgraded from CF8 to CF9 Enterprise.  I'm getting an "Unable to create temporary file" error on
    my CFIMAGE resize calls.  We use sandbox security.  I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it?   The same code (and sandbox settings) ran fine in CF8....
    Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
    Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
    The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
    ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
    I need to restart CF to get everything working again.

    Another update.   Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable.  Got an "Unable to create temporary file" error.
    Inserted the following code in the file upload page:
    <cfscript>
    writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
    </cfscript>
    ... and it reveals the temp directory as C:\WINDOWS\TEMP.  Added that to the sandbox, and the CFIMAGE READ is working properly now.
    Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
    For reference, see the section "Sandbox Considerations" at this link:
    http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

  • Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

    i am using the following description to create a web service reference:
    web reference :REST
    Name :Yahoo Map
    URL :http://local.yahooapis.com/MapsService/V1/mapImage
    HTTP Method: GET
    Basic Authentication: No
    Add Parameter:
    Name       Type
    appid        String
    location    String
    Output Format: XML
    XPath to Output Parameters : /Result
    Output Parameter:
    Name       Path       Type
    Url          /text()      String
    Then i tried to create form and report on webservice:
    Web Service Reference Type: Yahoo Map
    Operation: doREST
    All the fields i keep as default
    I tick the checkbox (url)in report Parameter
    After clicking next whereever required i click create button
    I get the following error
    ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
    Please someone help to solve this as i need to fix it urgently.

    i exported the application from apex.oracle.com and imported it to our environment
    import went fine, but when I ran the IR page I got
    ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
    evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
    while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
    however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well

  • APEX:Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

    I am using Apex 4.2.2.00.11
    am using the following description to create a web service reference:
    web reference :REST
    Name :Yahoo Map
    URL :http://local.yahooapis.com/MapsService/V1/mapImage
    HTTP Method: GET
    Basic Authentication: No
    Add Parameter:
    Name       Type
    appid        String
    location    String
    Output Format: XML
    XPath to Output Parameters : /Result
    Output Parameter:
    Name       Path       Type
    Url          /text()      String
    Then i tried to create form and report on webservice:
    Web Service Reference Type: Yahoo Map
    Operation: doREST
    All the fields i keep as default
    I tick the checkbox (url)in report Parameter
    After clicking next whereever required i click create button
    I get the following error
    ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
    Please someone help to solve this as i need to fix it urgently.

    336554,
    Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
    57434

  • Unable to create a PO(in backend system) in ECS

    Hello all,
    I used the FM BBP_PD_SC_CREATE, BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE to create a shopping cart in ECS scenario.
    The problem is I am unable to create a PO in the backend system for the shopping cart. I am also getting the message 'Vendor 3000014598 not intended for purch. org. Ref: MM Purchasing Org'.
    Please help me in this context.
    Thanks,
    Vishnu

    Hi,
    The problem with organization structure , Please check your organizaiton structure.
    Change company code /Pur.org Separatlly it will work.
    while replicating vendor please select the flag 'with out reference to back end pur.org' and choose local purchasing organization.
    refer this link
    Vendor xxxxxxx not intended for purch. org. xxxx Purchasing Organization
    Thanks
    prasad .s

  • Unable to create RAID on SPARC-Enterprise-T5220

    hi:
    i got the following issue on my SPARC-Enterprise-T5220.
    i have constructed the RAID-1 on 4 disks out of 6.
    i have created RAID-1 on OS Disks using raidctl command on single user mode
    and i have created RADI-1 on other two disks. but i'm unable to create RAID-1 on the rest of the two disks.
    here i s the info i am giving
    # format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
    /pci@0/pci@0/pci@2/scsi@0/sd@0,0
    1. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
    /pci@0/pci@0/pci@2/scsi@0/sd@1,0
    2. c1t2d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 273>
    /pci@0/pci@0/pci@2/scsi@0/sd@2,0
    3. c1t4d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 136>
    /pci@0/pci@0/pci@2/scsi@0/sd@4,0
    disks 2 and 3 are under raid but where as 0 and 1 are not
    i am trying to construct raid on that disks it is giving following error
    # raidctl -c c1t0d0 c1t1d0
    Creating RAID volume will destroy all data on spare space of member disks, proceed (yes/no)? yes
    Too many arrays.
    here is my OS release information
    Solaris 10 5/08 s10s_u5wos_10 SPARC
    Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 24 March 2008
    SunOS 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
    would any body help me on this.
    thanks in advance
    SN

    Hello sir,
    I work for one of Sun's Channel Development Partners and had a partner site the same problem today, but with a T5240.
    If you check with the "Disk Volumes" section of the T5120/T5220 Admin Guide, it tells us that the integrated LSI controller only supports up to two volumes at a time.
    http://docs.sun.com/source/820-2179-10/Volume-man.html#50606103_28600
    If you need more options for hardware RAID configuration of the internal disks, Sun offers an internal PCI-E SAS RAID HBA:
    SGXPCIESAS-R-INT-Z     
    Sun StorageTek (TM) 8-port internal SAS RAID Host Bus Adapter with RAID 0, 1, 1E, 10, 5, 5EE, 50, 6, 60 support, 256MB of onboard memory and 72 hour Battery Backed Write Cache. RoHS 6. X-Option.
    List Price: $599
    You'd also want this cable kit to go with it:
    SEDX9SA2Z     
    Internal SAS Cable Kit required to use Sun RAID Card SG(X)PCIESAS-R-INT-Z for use with the SPARC Enterprise T5220
    List Price: $40
    Here is documentation about the adapter:
    http://docs.sun.com/app/docs/coll/sas-raid-hba-int

  • Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is:

    Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is: "Error creating EntityBean: Io exception: The Network Adapter could not establish the connection".
    while executing JSP:<%
    * add.jsp
    * Adds a new entry through EmployeeBean. This is a JSP that serves 2
    * functions. First of all, when called with no arguments, it will display a
    * table with a few input fields. The user should enter empNo, empName and
    * salary of the new record to be added. When she submits this
    * information, it is sent to this page again. If it is successful, then the
    * user can continue adding new entries. If it is not, then the old data will
    * be displayed, and a warning message will be shown to her.
    %>
    <%@ page import="com.webstore.*,java.io.*,java.util.*,javax.naming.*" %>
    <%
    // Make sure this page will not be cached by the browser
    response.addHeader("Pragma", "no-cache");
    response.addHeader("Cache-Control", "no-store");
    // We will send error messages to System.err, for verbosity. In a real
    // application you will probably not want this.
    PrintStream errorStream = System.err;
    // If we find any fatal error, we will store it in this variable.
    String error = null;
    // In a moment we will check if all columns were passed to this page
    String param_1 = "";
    String param_2 = "";
    String param_3 = "";
    long dptNo = 0;
    String dptName = null;
    // This variable indicates what function of this page is currently used. If
    // this page is called with parameters, then a new entry should be
    // added. In that case this variable is true.
    boolean submitting = false;
    // We will first attempt to get the reference to EmployeeHome from the
    // session. The "list.jsp" page sets this attribute in the session.
    DepartmentHome home = (DepartmentHome) session.getAttribute("DepartmentHome");
    if (home == null) {
    error = "No previous connection to DepartmentBean.";
    } else {
    // Attempt to get all 3 parameters from the session
    param_1 = request.getParameter("DPTNO");
    param_2 = request.getParameter("DPTNAME");
    // If all 3 parameters are specified, then this is probably a submission by
    // this very page. Note that if the user left one of the fields blank, then
    // the corresponding parameter will be "", not null.
    if (param_1 != null && param_2 != null) {
    param_1 = param_1.trim();
    param_2 = param_2.trim();
    submitting = true;
    // In the following variable we will store a (non-fatal) warning message. This
    // message will be displayed in the page, but so will the submission form.
    String warning = null;
    if (submitting) {
    warning = "";
    // If there is an empty param_1, param_2 and/or param_3, then this will be noted
    // in the warning message.
    if ("".equals(param_1)) {
    warning = "Null param_1 specified. ";
    if ("".equals(param_2)) {
    warning += "Null param_2 specified. ";
    // If we don't have a warning message yet, then we will attempt to create
    // a new record.
    if ("".equals(warning)) {
    try {
    dptNo = (long)Long.parseLong(param_1);
    dptName = new String(param_2);
    Department rec = (Department) home.create(dptNo);
    rec.setDptname(dptName);
    // empty columns after insert for effect
    param_1 = "";
    param_2 = "";
    // If we got this far, then there was no problem detected.
    warning = null;
    } catch (Exception e) {
    // Set the warning variable to indicate a problem.
    warning = "Unable to create new entry, caught: \"" +
    e.getClass().getName() + "\", message is: \"" +
    e.getMessage() + "\".";
    // Decide what the title will be.
    String title;
    if (error != null) {
    title = "Error";
    } else {
    title = "com.webstore | Add entry";
    %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
    <HTML>
    <HEAD>
    <TITLE><%= title %></TITLE>
    </HEAD>
    <BODY bgcolor="#FFFFFF">
    <H1><%= title %></H1>
    <%
    // If there was a fatal error, then display the error message
    if (error != null) {
    %>
    <P><BLOCKQUOTE><%= error %></BLOCKQUOTE>
    <%
    // Otherwise display a table with fields to be filled in.
    } else {
    // If there was a warning, then display it.
    if (warning != null) {
    %>
    <TABLE border="1" bgcolor="#FF2222">
    <TR><TD><FONT color="#FFFFFF"><STRONG>Warning: <%= warning %></STRONG></FONT></TD></TR>
    </TABLE>
    <%
    } /* if */
    // Display the table with fields. There are two columns. The left column
    // contains the names of the fields, while the right column contains the
    // fields.
    %>
    <FORM action="dptadd.jsp" method="GET">
    <P><TABLE border="1">
    <TR>
    <TD><STRONG>DptNo:</STRONG></TD>
    <TD><INPUT type="text" name="DPTNO" value="<%= param_1 %>"></INPUT></TD>
    </TR>
    <TR>
    <TD><STRONG>DptName:</STRONG></TD>
    <TD><INPUT type="text" name="DPTNAME" value="<%= param_2 %>"></INPUT></TD>
    </TR>
    <TR>
    <TD colspan="3" align="center"><INPUT type="submit" value="Add this entry"></INPUT></TD>
    </TR>
    </TABLE>
    </FORM>
    <%
    } /* else */
    %>
    <P><TABLE border="1">
    <TR><TD>Back to list</TD></TR>
    </TABLE>
    </BODY>
    </HTML>
    Please guide me..

    Rajive,
    This is the same problem as in your other post:
    sql is running very slow
    So please refer to my answer there.
    Good Luck,
    Avi.

  • Unable to create a connection for Discussion Forums.

    Hi,
    I have my WC_Spaces and WC_Colloboration Servers running actively. When I try to create a new connection by right-clicking Connections in Applications Resources and choose Discussion Forums and too I entered the URL and admin fields, I find its unable to create a new connection. The error displayed is : "Failed to verify connection". Please help me with this.
    Regards,
    Dinesh Vishnu Kumar

    Hi,
    In your webcenter application you have created the discussion forum connection and you have connections.xml file in your application.Open the connections.xml in jdeveloper and check the discussion forum connection entry.
    For example here I have written down my entry on forum connection-
    <Reference name="Discussion Forum Connection" className="oracle.adf.mbean.share.connection.webcenter.forum.ForumConnection" xmlns="">
    <Factory className="oracle.adf.mbean.share.connection.webcenter.forum.ForumConnectionFactory"/>
    <RefAddresses>
    <StringRefAddr addrType="forum.url">
    <Contents>http://localhost:8890/owc_discussions</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="admin.user">
    <Contents>weblogic</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="connection.time.out">
    <Contents/>
    </StringRefAddr>
    <StringRefAddr addrType="policy.uri.for.auth.access">
    <Contents/>
    </StringRefAddr>
    <StringRefAddr addrType="policy.uri.for.public.access">
    <Contents/>
    </StringRefAddr>
    <StringRefAddr addrType="recipient.key.alias">
    <Contents/>
    </StringRefAddr>
    <StringRefAddr addrType="adapter.name">
    <Contents>Jive</Contents>
    </StringRefAddr>
    </RefAddresses>
    </Reference>
    Change the required entries with your values(for serveraddress,port and admin user).
    One more thing need to consider that is -
    in jdeveloper proxy ,add the server address in exception list and restart the jdeveloper.
    Sometimes it will show you up as "failed to verify the connection". But it will work atleast functionality-wise it will work.
    Apart from this,I have a query on "Have you used any VPN connection to connect collaboration server to create forum connection?"
    Hope it works for you.
    Regards,
    Hoque

  • Unable to create a Driver object from driver with Media type string CTC PHO

    Hi All,
    I am trying to develop a siebel cti adapter for avaya.
    I have loaded a custom dll into siebel server but it is throwing error "SBL-CSR-00500: Unable to create a Driver object from driver C:\Mydriver\cti.dll with Media-Type-String CTC Phone ".
    It has been long time without any progress.
    Please help
    Thanks
    Nishant

    Hi tomhowell,
    According to your description, my understanding is that you got an error when you created a site from a custom site template after migrading SharePoint 2010 to your server.
    Did you have the original solution file of the site template? Please re-deploy the solution to your SharePoint site, then create a site from the new site template, compare the result.
    Also use  SPDisposeCheck to indentify the memory leak:
    http://archive.msdn.microsoft.com/SPDisposeCheck
    http://www.fewlines4biju.com/2012/11/detected-use-of-sprequest-for.html
    Here are some similar posts for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3a25eb86-8415-4053-b319-9dd84a1fd71f/detected-use-of-sprequest-for-previously-closed-spweb-object-please-close-spweb-objects-when-you?forum=sharepointdevelopmentprevious
    http://social.msdn.microsoft.com/Forums/en-US/50ce964f-94a6-4fda-abc0-caa34e7111f1/error-detected-use-of-sprequest-for-previously-closed-spweb-object-occurs-when-new-site-gallery
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

Maybe you are looking for

  • To check illegal skype access of my skype account

    Hi, I was not online on skype and attending one business meeting. My friend called me and said that I abused him on skype while I was not accessing that time. When I access my skype account. I found that he was true. Somebody has accessed and abused

  • Why does my Mozilla Support password suddenly fail to work?

    I tried to sign in to Mozilla Support to ask a question about Thunderbird that I could find no answer to elsewhere. I was denied. I verified my user name and password from the list I carefully keep on a flash drive and tried again. No go. Then I aske

  • Link for text in applet

    how to set EXTERNAL URL link for text in applet

  • How do I use a thread from the execute pool

    Is there any way to use the execute pools directly from my application code? We cannot find any reference in the documentation. This will probably happen in a startup class, but not limited to. Thanks, Elli

  • Value in cusotm subtotal field is not updating in LIS (S) tables

    Hello Experts, All the existing subtotal vlues (provided by SAP) we have consumed based on the pricing procedure's requriement and we have created a new Z subtotal field (like ZZKZWI11) in pricing, it is working fine and the values are getting update