Unable to create iPod-playable h.264 files using Compressor

I've been running some video compression work for iPod, and have been able to do "quick & dirty" exports to iPod via QuickTime Pro (standalone & from within FCP).
To get more of a handle on the compression parameters than the default "Export to iPod" setting allows, I have had success using 3'rd party tools, and using customized settings in QuickTime Pro (most excellently discussed in Ken Stone's page here: http://www.kenstone.net/fcphomepage/video_to_ipodstone.html)
So far so good: successfully creating iPod-friendly files that meet the requirements: http://www.apple.com/ipod/specs.html
What I really want to do, though, is create a saved Compressor setting for setting up batches of iPod conversions, and so I don't have to hand-tweak each export in QT Pro.
I am running current version of QT and Compressor, but CANNOT create MPEG 4/h.264 files that will load onto an iPod for the life of me.
Here's how it goes down for some different Compressor settings, with their results:
1.)
File format: QT
File extension: .mov
Video: 320x240 15 fps MPEG-4 Video (note for those playing along at home that there is **no way** to specify h.264 nor "Baseline Low Complexity" in the Compressor dialog)
Audio: AAC
Result: a quick to encode, plain old MPEG4 file with only so-so quality that will load and play on an iPod
2.)
File format: QT
File extension: .mov
Video: 320x240 15fps h.264 (again: no way to select "Baseline Low Complexity" within Compressor)
Audio: AAC
Result: Slower to encode, higher quality and smaller file that will NOT load onto an iPod. Error in iTunes states that the file "cannot be played on this iPod"
3.)
File format MPEG4
Extension: mp4
Video: 320x240 15fps Basic (0) ISMA profile, Medium VBR. Note that there is no way to specify h.264
Audio: 44.1/128 kbps
Results: Same as in #1 above
What I feel I have it boiled down to is that there is some weirdness in Compressor that doesn't connect to the QuickTime compression settings properly. Where you SHOULD be able to specifiy h.264 and Low complexity settings (as you can when using QT Pro) for an MPEG4 file, you cannot in Compressor. Similarly, when specifying h.264 in Compressor, there is no way to specifiy Baseline Low Complexity.
Long post- sorry! I have tried many more iterations than are listed here. I'll spare everyone those, as the examples above I think illustrate my predicament.
Anyone have any thoughts?
Thanks-
John

OK.. first, thanks for the reply. Sort have had given up on finding an answer here and just checked back here yesterday. Lo and behold I do see the iPod setting on a newer machine- and started to look into why exactly it isn't on the main workstation here.
Turns out that you don't get updates unless the software is registered. Maybe it's just me, but I never bother with product registations (until today I guess).
So a word up to anyone else who does the same. You won't get FCP automatically updated unless you register.
I assume after I update everything I should be AOK
Also- I should have marked your reply as SOLVING my problem- but my first instinct was to say to myself "Of course I'm using current versions- what kind of jamoke does this guy think I am, anyway?" So, feeling very charitable, I marked your reply as merely helpful.
And now I have to eat my words! Sorry about that. Guess you'll get good karma points somehow. Maybe I'll look into that some more while I'm downloading updates this AM.
Thanks again!
-John

Similar Messages

"Bridge is unable to create a JPG for this file"

Some of my exports to Flickr fail with this message. These a larger file but within flickr limits. Does anyone know what are the limitations set by bridge.

I am having the same problem.
It worked perfectly until about 6 weeks ago. Then I started getting the error message. If I selected the images from the exact same directory and dropped them on the export tab, they would usually work. Also if I took 5 or less images, It would usually work, so I don't hink there is any problem with the directoiry or the files.
I have reinstalled brif=deg and photoshop. it is now CS5.1 and all was stable. for a week and now I am having the problem that Bridge is unable to create a jpg for this file.
Previously, I did not notice that erroe message, so I could have been having some other error, but now this is the one I am having. I am not trying to change the size of these images. Just convert from nef and photoshop to jpeg.

Bridge Export: "Unable to create a jpg for this file"

Every now and then when I attempt to "Export" a jpg from Bridge (typically to reduce the image size for web posting), I get a little exclamation point, and then when you click on the file name I get a message telling me that Bridge is unable to create a jpg for this file...
The interesting thing is that all pics in the folder have the same problem (ie, it seems to be a folder issue, not an issue with an individual file).
If I copy all the pics to another folder, the export works fine. (Obviously this is not a desired solution.)
Thanks in advance!
Brian

I am having the same problem.
It worked perfectly until about 6 weeks ago. Then I started getting the error message. If I selected the images from the exact same directory and dropped them on the export tab, they would usually work. Also if I took 5 or less images, It would usually work, so I don't hink there is any problem with the directoiry or the files.
I have reinstalled brif=deg and photoshop. it is now CS5.1 and all was stable. for a week and now I am having the problem that Bridge is unable to create a jpg for this file.
Previously, I did not notice that erroe message, so I could have been having some other error, but now this is the one I am having. I am not trying to change the size of these images. Just convert from nef and photoshop to jpeg.

How to create and edit a .ini file using java

Hi All...
Pls help me in creating and editing an .ini file using java...
thanks in advance
Regards,
sathya

Let's assume the ini file is a mapping type storage (key=value) so lets use Properties object. (works with java 1.4 & up)
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.Properties;
public class Test {
     private static Properties props;
     public static void main(String[] args) throws IOException {
          File file = new File("test.ini");//This is out ini file
          props = new Properties();//Create the properties object
          read(file);//Read the ini file
          //Once we've populated the Properties object. set/add a property using the setProperty() method.
          props.setProperty("testing", "value");
          write(file);//Write to ini file
     public static void read(File file) throws IOException {
          FileInputStream fis = new FileInputStream(file);//Create a FileInputStream
          props.load(fis);//load the ini to the Properties file
          fis.close();//close
     public static void write(File file) throws IOException {
          FileOutputStream fos = new FileOutputStream(file);//Create a FileOutputStream
          props.store(fos, "");//write the Properties object values to our ini file
          fos.close();//close
}

How to create a table in the file using java code.?

HI,
I should export the data from the view objects to a word document. I have done that but I should
display the data in the form of a table.
Kindly come up with the necessary information on how to create a table in the file using java.
Thanks,
Phani

Hi, Thank you for responding to my query.
The below are the details of my code.
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding StudentDetailsContent =
(DCIteratorBinding)dcBindings.get("StudentView1Iterator");
OutputStreamWriter w = new OutputStreamWriter(outputStream, "UTF-8");
Row currentRow =
StudentDetailsContent.getRowSetIterator().first();
Object a[]= currentRow.getAttributeValues();
int i;
for(i=0 ;i<=a.length;i++){
w.write(a.toString());
w.write(" ");
w.flush();
I am usning this coding to achieve the task of exporting data to file.
I need to display this information in the table that is where I need help from you people.
Thanks,

Unable to create content properly in UCM 11G using validateStandard filter

Hi All,
 We have used validateStandard filter to assign content id with 16 digits in UCM 10G and it worked well, we deployed this component in UCM 11G but it is not working properly. When we click on Check In button content is getting created and displaying Check_In Confirmation with 16 digit Content ID, upon clicking on Content Info it is displaying the complete info page. When we try to search the content it is not displaying in search results, also when tried to export it using Archiver it is not creating batch file. When we see logs in View Server out put it is displaying
Unable to lock content with dDocName: 6322932684534064
File to be removed: D:/oracle/ucm/cs/oracle/ucm/cs/vault/~temp/6322932684534064_meta.htm
Below is the code and its corresponding log after check In is performed
trace("=====Set 16 digit random number as ContentId=====");
 String contId = databinder.getLocal("dDocName");
 trace("=====value of contId====="+ contId);
 if("".equals(contId))
 //trace("=====Inside ContentId generetion=====");
 int maxdigits = 16;
 StringBuilder result = new StringBuilder();
 Random r = new Random();
 for (int i = 0; i<maxdigits; i++)
 result.append(r.nextInt(10));
 databinder.putLocal("dDocName", result.toString());
 trace("=====Generated ContentId is====="+ result.toString());
View Server O/P:
=====Set 16 digit random number as ContentId=====
=====value of contId=====001885
=====Generated ContentId is=====6322932684534064
>(internal)/6 07.08 15:09:28.273 IdcServer-968 Unable to lock content with dDocName: 6322932684534064
>(internal)/6 07.08 15:09:29.476 IdcServer-968 File to be removed: D:/oracle/ucm/cs/oracle/ucm/cs/vault/~temp/6322932684534064_meta.htm
Thanks,
Ashok

Its a bug. References BUG:16231709 - OBIA7964:ERROR WHILE CREATING DATA WAREHOUSE TABLES USING DAC 11G
So far the workaround is to use one Container Name at a time when creating the Warehouse.
If helps mark and update back

How can I export a surround sound movie file using compressor?

I want to create movie files using Motion and Soundtrack Pro that have surround sound. I can make ac3 surround sound files in SOundtrack Pro, I can add them to projects in Final Cut Pro, but I can't see any way to use Compressor to output the movie files with surround sound. The encoding results in plain stereo files. Please help.

HI Tony, you should be able to do this simply within the Compressor.app V4.1.x using the "surround Sound Group" and the shipped setting DOLBY DIGITAL setting. Instead of just adding a file, you need to:
Add a "Surround Sound Group" (control++i or file/add surround sound group or use the "+" plus sign at bottom left corner of Current/BATCH window". You'll get a pane with the channels you need to manipulate.
Click on the tracks Icons L to Rs and select the surround tracks as prompted and navigate through the finder interface. .. simple. WAV, BWF etc
Optionally Add the video object from here too.
Select the BATCH job (top layer with the ORBIT looking icon)) and use the INSPECTOR (right pane) to see what audio objects have been selected and verify location etc.. follow the dialogue (follow your nose)
Then Select the SETTING layer and use the default DOLBY DIGITAL setting and form the "settings/Create Blu Ray/Dolby Digital" and drag it over the batch job setting
Select this and adjust the LOCATION for the target distribution
Select the INSPECTOR AUDIO pane (right pane) and adjust any settings and EFFECTS to your taste.
select the cluster (if one is defined)
+B (submit) the job for the distribution or another master.
This will work fine.. pretty easy.. You'll need to work the audio settings as you like. If you get stuck, use the compressor.app V4.1 help.. its actually good.
Post your results for others to see.
Warwick
Hong Kong

Unable to install iTunes, I get an error saying it is unable to create the directory C:\Program Files (x86)\iTunes\iTunes.Resources\da.lproj\iPodWelcomeOffline.nib

Unable to install iTunes, I get the following error:

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

B2B SelfService Error creating Trading Partner .zip import file using ant

SOA 11g 11.1.1.5 B2B - We are trying to create an import file for out trading partners into SOA B2B 11g but are getting errors when we run the ant script to build the import zip file.
We ran the ant-b2b-util to get the b2bselfservice.xsd file, loaded that into jDev to show the selfservice.xml structure.
We have built a trading partner xml file and at this point have stripped it down to one TP just to see if we could get it to work and we keep getting the same error messages.
From the $SOA_ORACLE_HOME/bin directory (where we have placed our TP xml file: TPD_NA.xml) here is the command and results from running the ant script:
[oracle@nalinoap05 bin]$ ant -f ant-b2b-util.xml b2bselfservice -Dinput=$ORACLE_HOME/bin/TPD_NA.xml -Doutput=$ORACLE_HOME/bin/TP_Docs.zip
Buildfile: ant-b2b-util.xml
b2bselfservice:
weblogic_dependencies:
[echo]
[echo] Weblogic server location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/wlserver_10.3
[echo] JNDI properties folder location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin
[echo]
verifyargs:
utility:
[echo]
[echo] java.naming.provider.url=${java.naming.provider.url}
[echo] java.naming.factory.initial=${java.naming.factory.initial}
[echo] java.naming.security.principal=${java.naming.security.principal}
[echo] java.naming.security.credentials=*****
[echo]
[echo]
[echo] args=selfservice
[echo]
[java] Commandline arguments 1: [selfservice]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Input file location(s) :[oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TPD_NA.xml]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Output file location :/oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TP_Docs.zip
[java] 2012.04.10 at 13:27:35:596: main: (INFO) TradingPartner created :/soa/b2b/tp_id1AC191488133.xml
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=852 docDef=852Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=850 docDef=850Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=860 docDef=860Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=856 docDef=856Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=810 docDef=810Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:691: main: (SEVERE) TPD_NA.xml: Error in Validation:
[java] [org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
 org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
 org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
 org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
 org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
 org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
 org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
 org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
 org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef']
[java] Java Result: 255
BUILD SUCCESSFUL
Total time: 1 second
Here is the contents of TPD_NA.xml:
<?xml version="1.0" encoding="UTF-8"?>
<SelfService xmlns="http://xmlns.oracle.com/integration/b2b/selfservice/profile">
<TradingPartners>
<TradingPartner hosted="false" name="OvvvvvvvX" >
<Identification name="EDI Interchange ID" value="18xxxxxxxxxX" />
<Identification name="EDI Interchange ID Qualifier" value="14" />
<Identification name="DUNS" value="18xxxxxxxxxX" />
<Identification name="Generic Identifier" value="18xxxxxxxxxX" />
<Identification name="AS2 Identifier" value="18xxxxxxxxxX" />
<SupportedDocumentDefinition initiator="true" docTypeName="852" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="852Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="4010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="850" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="850Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="860" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="860Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="856" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="856Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="810" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="810Def" />
</TradingPartner>
</TradingPartners>
</SelfService>
We have exported our metadata and looked at the doc_EDI_X12.xml file and ALL of these referenced documents exist in that file and can be seen by going to Administration --> Document and under the Document Protocols navigation --> EDI_X12 --> 5010 --> 810 --> 810Def (as an example).
If we strip out all of the SupportedDocumentDefiinition lines then the ant script will build an import file with just the trading partners and Identifications.
What are we doing incorrectly or what is not working properly to get the ant script to build the import zip file??
Thanks for any assistance,
Ken

Does that mean we have to create all of the document type definitions in the selfservice file?
We have created (installed) all of the document types by installing them from the B2B Administration --> Document page.
The definitions in the Trading Partner xml file exactly match the definitions of the installed documents.
In the selfservice.xsd the <element> SelfService shows the profile:DocumentProtocols as minOccurs as 0 :
 <element name="SelfService">
 <complexType>
 <sequence>
 <element minOccurs="0" maxOccurs="1"
 ref="profile:DocumentProtocols" />
 <element minOccurs="0" maxOccurs="1"
 ref="profile:TradingPartners" />
 <element minOccurs="0" maxOccurs="1"
 ref="profile:Agreements" />
 </sequence>
 <attribute name="version" type="profile:non-empty-string"
 use="optional" />
 </complexType>
 </element>
so we thought that since the documents had already been defined (created/installed) to B2B they would not have to be redefined in the selfservice xml.
If we have to define all of the document types in the selfservice xml file that we are using for the trading partners what are the minimum values that we need to include?
Could we use minimal definitions such as this:
<DocumentProtocols>
<DocumentProtocol name="EDI_X12">
<DocumentProtocolVersion name="4010">
<DocumentType name="850">
<DocumentDefinition name="850def" />
</DocumentType>
<DocumentType name="997">
<DocumentDefinition name="997def" />
</DocumentType>
</DocumentProtocolVersion>
</DocumentProtocol>
</DocumentProtocols>
before the <TradingPartners> section of the seflxervice xml file?
Thanks for your assistance!

Help creating project specific ALSB Customization file using WLST

I asked this question in August in another forum and was redirected here, but never followed up. I'm hopeful someone has done this...
Is it possible to create an ALSB CUstomization file for a single project using WLST?
If so, does anyone have an example they would be wiling to share. I've been beating my head against the wall for almost 2 days (well, months now...) , and I'm REALLy starting to get a headache from it now....
We're running WLS 9.2 MP2 and ALSB 2.6 RP1
Any help is greatly appreciated,
Brian

Brian, OSB specific questions are best directed in the SOA Suite forum:
SOA Suite
It looks like there is an ALSBConfigurationMBean with a customize method, but I have not worked with it and it does not sound like that will give you precisely what you want:
http://edocs.bea.com/alsb/docs261/javadoc/com/bea/wli/sb/management/configuration/ALSBConfigurationMBean.html#customize(java.util.List)

Create web pages from xml files using Servets or JSP

I�m new in this tecnology and I have to create a web pages from information that I get from a XML files. I would like to know if there is a place where I can find examples of code or any book that could help me.

Two places with loads of information on this:
http://xml.apache.org
Look at Xalan or Cocoon.
Also, there was an article on http://www.javaworld.com on XML with JSP.

Unable to create publication item for remote database using db link

The mobile repository is in instance A.
I have to access and sync data from a table in remote database instance B.
I have run the consolidator_rmt.sql script in instance B under schema_B. I have created a private fixed user db link in instance A under schema_A to access schema_B's tables. I then created a synonym test_B for table test_B in schema_B using the DB link.
While creating publication item for test_B using MDW, the column list for test_B appears blank. Has anyone encountered this problem and what is the solution.
Thanks for your help.
Rosa.

Hello Pruthvi ,
See these threads
Uninstalling MaxDB
Work process Ended.
Thanks
Chandran

Unable to get jarsigner to sign jar file using pkcs11 smartcard

I'm using a JDK jdk1.6.0_14 with a datakey smartcard with the below info in pkcs11.cfg file:
name = DK330
library = c:\windows\system32\dkck232.dll
I have also configured the java.security file to include the security.provider.10=sun.security.pkcs11.SunPKCS11 c:/pkcs11.cfg
I have my environment set for the below to keep it simple as possible:
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_14
CLASSPATH=C:\Program Files\Java\jdk1.6.0_14\lib
PATH=C:\Program Files\Java\jdk1.6.0_14\bin;c:\windows;c:\windows\system32
1) I am able to Confirm that the secret key is present in the keystore
keytool -v -list -keystore NONE -storetype PKCS11 -storepass xxxxxx
Keystore type: PKCS11
Keystore provider: SunPKCS11-DK330
Your keystore contains 1 entry
Alias name: CS.NOLSC.002's U.S. Government ID
Entry type: PrivateKeyEntry
Certificate chain length: 1
Certificate[1]:
Owner: CN=CS.NOLSC.002, OU=USN, OU=PKI, OU=DoD, O=U.S. Government, C=US, OU=PKI, OU=DoD, O=U.S. Government, C=US
Issuer: CN=DOD CA-14, OU=PKI, OU=DoD, O=U.S. Government, C=US
Serial number: 3e8e
Valid from: Mon Feb 05 14:53:22 EST 2007 until: Thu Feb 04 14:53:22 EST 2010
Certificate fingerprints:
MD5: 9D:34:AF:D8:DE:18:15:78:D6:88:3D:37:83:FA:DC:E8
SHA1: 8A:BB:39:D5:2B:45:F7:CE:A3:93:C5:71:5C:36:DC:FE:3F:B4:7D:9A
Signature algorithm name: SHA1withRSA
Version: 3
Extensions:
#1: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
DigitalSignature etc
2) When I try to sign the applet using the below commands I get the same errors:
command 1:
jarsigner -keystore NONE -storetype PKCS11 -providerClass sun.security.pkcs11.SunPKCS11 -providerArg ${java.home}/lib/security/pkcs11.cfg sfilechooser.jar "CS.NOLSC.002's U.S. Government ID"
I get this error::
jarsigner error: java.security.ProviderException: sun.security.pkcs11.wrapper.PKCS11Exception: CKR_ATTRIBUTE_TYPE_INVALID
command 2:
jarsigner -verbose -keystore NONE -storetype PKCS11 -storepass xxxxxx sfilechooser.jar "CS.NOLSC.002's U.S. Government ID"jarsigner error: java.security.ProviderException: sun.security.pkcs11.wrapper.PKCS11Exception: CKR_ATTRIBUTE_TYPE_INVALID
I can also confirm the jar file that I'm trying to sign is unsigned using the below command without problem.
C:\Program Files\Java\jdk1.6.0_14\bin>jarsigner -verify -verbose -certs -keystore NONE -storetype PKCS11 sfilechooser.jar
Enter Passphrase for keystore:
0 Wed Jul 08 09:36:06 EDT 2009 META-INF/
71 Wed Jul 08 09:36:06 EDT 2009 META-INF/MANIFEST.MF
4227 Tue Jun 09 09:56:20 EDT 2009 DirList.class
0 Wed Jul 08 09:29:52 EDT 2009 FileChooserPackage/
4728 Tue Jun 09 09:56:20 EDT 2009 FileChooserPackage/DirUtil.class
809 Fri May 29 13:05:42 EDT 2009 FileChooserPackage/FileChooserBean$AWTFileDialogThread.class
765 Fri May 29 13:05:42 EDT 2009 FileChooserPackage/FileChooserBean$AWTSaveDialogThread.class
819 Tue Jun 09 09:56:20 EDT 2009 FileChooserPackage/FileChooserBean$FileChooserBeanThread.class
1015 Tue Jun 09 09:56:20 EDT 2009 FileChooserPackage/FileChooserBean$FormsDecoderException.class
815 Tue Jun 09 09:56:20 EDT 2009 FileChooserPackage/FileChooserBean$SaveFileChooserThread.class
17198 Tue Jun 09 09:56:20 EDT 2009 FileChooserPackage/FileChooserBean.class
s = signature was verified
m = entry is listed in manifest
k = at least one certificate was found in keystore
i = at least one certificate was found in identity scope
jar is unsigned. (signatures missing or not parsable)
======================================
What could be my problem to get my applet signed? I'm at a loss.

I found the problem.
I was able to use jarsigner correctly after I backed off on the GemPlus driver version from v4.7.062 file name dkck232.dll to the previous version of dkck201.dll at v4.7.062.

Unable to run UNIX command after uploading file using webutil_file_transfer

OS: UNIX Solaries , Oracle Application Server 10g
I designed a form contains 2 buttons
1- Upload button: to let the user upload form.fmb file to the application server using webutil_file_transfer function
2- Compile button to compile the uploaded form in the applications server to generete the FMX using the following command
host('/bin/bash /u01/oracle/runtime/test/frmkfccmp.sh >/u01/oracle/runtime/test/log.log'); The problem is after uploading the file to the server, the Compile button don't work, although it works well if I close the form then open it again and press the Compile button without pressing the Upload button
Any help is appreciated
Thanks and Regards

Add the weblogic server's bin directory to your PATH. You will need to a couple of WLS jars to the CLASSPATH. There might be something in the installation/setup documentation that tells you all this. I have only used WLS 5.1 and 7.0.

Unable to pick unicode characters from input file using "outside in"

Hi,
I am using your product "Outside in" to read unicode text from input
source file. For reading text I am using TReadFirst and TReadNext even
though "It is not picking unicode characters from input source file
and also it is giving zunk character to the buffer". How can I
retrieve unicode character from input source using "outside in"
product. Your help makes me learn more stuff.
Regards,
Naresh.D

I am trying to use CAReadFirst and CAReadNext to read unicode characters. Even it is not picking, I think is there any flags we need to set. can any one help to this.

Unable to create iPod-playable h.264 files using Compressor

Similar Messages

Maybe you are looking for