Unable to create search connector for FIORI Factsheets apps (ESH_COCKPIT)

Hi Team,
I am trying to create Search connectors via ESH_COCKPIT for fact sheets and analytical apps , but I am unable to do so.
I am following the steps as per the below link but unable to do so.
How to import models, activate connectors and index them - SAP NetWeaver Business Warehouse - SCN Wiki
Please help me out with this.
When i try to activate these services in Gateway service, I get the error
This is the error i Get in all the Fact sheets apps.
I searched some of the links in web and SCN and found that Search connectors has to be created using ESH_COCKPIT, but i am not sure how to create one and I am getting errors.
I request you all to please help me out with this, because this is kind of Urgent.

Hi prakhar,
did you find a solution? You have to activate the searchmodel "ACCOUNTING_DOC_H" right? Some of the models in the screenshot are activated allready.
What is the status now?
Thanks
Matthias

Similar Messages

  • Tiles for Fiori Factsheets Apps

    Dear Experts,
              I am configuring Fiori on HANA DB for Fact sheets and Analytical apps. I Completed all the necessary configuration.
              But here i unable to get Tiles for all fact sheet apps on launch pad.
              In the Catlog designer URL, i able to see all fact sheet apps with only target mappings, butn't with tiles.
              Please Help me to move forward from this issue.
              Regards
              Prasanth SV

    Hello Prasanth,
    Factsheet apps are directly integrated with SAP Fiori search in launchpad. SAP has not provided any standard tile for any of the Factsheet app. To access a particular Factsheet app you have to use the SAP Fiori Search Input Field in the Launchpad. Suppose you want to access the Production Order Factsheet app, for this do the following steps:
    Select Production Order from the drop-down list and put * in the search field if you dont have any specific Production Order and press enter.
    You will have the list of all Production Orders available at your backend system.
    From the list select the required one and you will be navigated to the Production Order Factsheet app.
    Hope this will be helpful for you to understand how Factsheet apps work.

  • RFC Error: Unable to create Metadata connection for Dictionary Provider

    I configured two RFC ('WD_XXX__MODELDATA_DEST and WD_XXX_RFC_METADATA_DEST). I tested it and it shown green light.
    When I run my application that coonnect to CRM using RFC, I got the following errors:
    <i>com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type com.xxx.types.Syuname could not be loaded: com.sap.dictionary.runtime.DdException: 'WD_ICEBERG_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_XXX_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
         at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:670)
         at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:233)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:443)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:381)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:410)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:79)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:121)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:117)
         at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:207)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:690)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:560)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:311)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:204)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:347)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:268)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:40)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.dictionary.runtime.DdException: 'WD_XXX_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_XXX_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:225)
         at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:180)
         at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:87)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:73)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
         at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
         at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
         ... 49 more</i>
    I understand that I need to configured the Metadata Dictionary type for the RFC. For this, I need to configure the Message Server properties (for load balancing).
    But my Basis guy told me that CRM is an application server, so we only can configured with application server properties. Is this true? (I really doubt it) That is no Message Server connection to CRM system now.
    If it is true, how can I create a RFC connection to CRM system?
    Thanks for help.
    Kent

    Hi KC,
    Try the following links, they may help you.
    http://help.sap.com/saphelp_nw04s/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/content.htm
    JCO connection
    Using the SAP Enterprise Connector for generating BAPI Proxy Classes
    points if useful
    Thanks
    Suresh

  • Creating search help for a field in AdHoc Query

    Hi
    We have created an infoset based on LDB PCH.
    (The infoset contains object type O only).
    For the object-id field the users want search help when choosing this field for selection.
    Using "start via selection screen" does not give a good solution.
    Can anyone explain how I can create search help for fields in an infoset?
    Regards
    Kirsten

    Hi
    We have created an infoset based on LDB PCH.
    (The infoset contains object type O only).
    For the object-id field the users want search help when choosing this field for selection.
    Using "start via selection screen" does not give a good solution.
    Can anyone explain how I can create search help for fields in an infoset?
    Regards
    Kirsten

  • ORA-01658: unable to create INITIAL extent for segment in tablespace

    NEW REPOSITORY INSTALLATION ERROR!!
    I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
    After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
    After pressing the Install button in the RAU:
    -I take public synonyms
    -I scheck the box for "Support Designer Objects", then
    -The Repository size is Medium
    -I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
    After Starting, the Installation began an stop by installing some Tables like schown :
    Operation: Started : 07/03/04 20:26:32
    Reading File: cktabs.sql
    Object : TABLE CDDL_TMP_TBL
    Executing statement(s)...
    Verifying...
    .and so on till....uns so weiter bis
    Reading File: cktabs.sql
    Object : TABLE RM$INFO
    Executing statement(s)...
    Error Submitting Definition: User intervention required...
    RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
    (NAME VARCHAR2(128) NOT NULL
    ,VALUE VARCHAR2(128)
    Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
    ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
    Dumping Buffer...
    CREATE TABLE RM$INFO
    (NAME VARCHAR2(128) NOT NULL
    ,VALUE VARCHAR2(128)
    ...End of Buffer
    User Requested: Stop Process
    When I read the Help of the Error the
    CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
    ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
    I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
    -pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
    -And the installato still stop with the same Error.
    Question: How schould I resolve this Configuration?
    You could respond in ENGLICH, GERMAN or FRENCH
    Thank you for your Help!

    You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
    Regards
    Sue

  • Unable to create a 'Z' for se16 transaction

    Hi everyone,
    we have a requirement where we are unable to create a Z for transaction SE16.
    I went to se93 and checked it was a function pool so i went to SE80 to make a copy of standard function group SETB to ZSETB.
    it made a copy of it anf I copied all the FM's and made a Z of those.
    Once it is done. When I activate it it give a lot of errors , I have checked it and made sure that it is copying entire Function Group but all are fine.
    My system is ECC6.0, earlier we had ZE16 which is a replica of SE16 and this had a lot of problem like ending in dumps , so we thought we would make a new Z transaction for SE16, but we get many error.
    Please try it out once in ur system before U suggest me a change to be made.
    Regards,
    Raj

    It is always best to minimize such issues by making a copy of programs or function modules where changes are needed to add new functionality. Also this would ensure any patches/notes  added in future would have minimum impact on your clones.
    -Cheers

  • Unable to create Accounting document for my Outgoing excise Invoice

    Dear All,
    I am implementing sales from Factory. I am unable to creat accounting document for my Outgoing excise invoice.  When I click the Utilization button, The excise invoice type is selected Deemed.
    1. How to control which Which Excise invoice type should be selected in J1IIN.
    2. For Deemed exports will system not genererate Accounting document for Excise Invoice?
    3. Where to view the excise invoice document types (Like Billing and order types)
    Thanks & Regards

    For deemed export sales,
    -Accounting documents will not get generated. (ref: Excise Acct Determination in CIN settings, you will not find Excise Tranraction type:ARE3 for which G/L account will not be assigned)
    -Excise Invoice type will be automatically triggered based on configuration : Excise Group / Series Group detetermination.
    - For Deemed Exports , only Quantity will get updated in RG1, but not the value. thats the reason, accounting document will not get generated.
    - This excise invoice is created, for - to update the RG1 registry / ARE3 creation.
    hope it clears
    regards,

  • How to create Search Help for a field in Table control !!

    Hello Friends,
                  I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
    Thanks,
    Senthil

    Check the sample code:
    *&  Include           ZSRO_MPRN_SEARCH                                 *
    MODULE PSTLZ_F4 INPUT
    MODULE pstlz_f4 INPUT.
    reading post code
      DATA: stepl TYPE systepl,
            stepl_index TYPE systepl.
      CLEAR: stepl, stepl_index.
      CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
      lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields-stepl     = stepl.
      APPEND lt_dynpfields. CLEAR lt_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = c_x
          determine_loop_index = c_x
        TABLES
          dynpfields           = lt_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields INDEX 1.
      ENDIF.
      ws_outcode  = lt_dynpfields-fieldvalue.
      stepl_index = lt_dynpfields-stepl.
      REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
      IF NOT lt_dynpfields-fieldvalue IS INITIAL.
        MOVE lt_dynpfields-fieldvalue TO ws_outcode.
        ws_len = STRLEN( lt_dynpfields-fieldvalue ).
        IF ws_len GE 7.
          ws_len = ws_len - 3.
         ws_icode = ws_code+ws_len(3).
          lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
          CONCATENATE lt_dynpfields-fieldvalue '%'
              INTO ws_outcode.
          CONDENSE lt_dynpfields-fieldvalue.
       REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
        ELSE.
          CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
            INTO ws_outcode.
        ENDIF.
       ws_ocode = ws_code+0(3).
      ENDIF.
    reading MPRN
      CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
      lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
      lt_dnpfields-stepl     = stepl_index.
      APPEND lt_dnpfields. CLEAR lt_dnpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = lt_dnpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dnpfields INDEX 1.
      ENDIF.
    MPRN blank and Post code exist
      IF lt_dnpfields-fieldvalue IS INITIAL.
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode.
        ELSE.
    MPRN blank and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1.
        ENDIF.
      ELSE.
    MPRN exist and Post code exist
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode AND
                       mprn EQ lt_dnpfields-fieldvalue.
        ELSE.
    MPRN exist and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE mprn EQ lt_dnpfields-fieldvalue.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'MPRN'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select MPRN'
          value_org       = 'S'
        TABLES
          value_tab       = i_mprn1 "lt_mprn
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
        IF sy-subrc EQ 0.
    Updating post code
          CONCATENATE i_mprn1-outcode  i_mprn1-incode
                        INTO ws_postcode
                             SEPARATED BY space.
          MOVE ws_postcode TO i_mprn-post_code.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-POST_CODE'.
          ws_dynpfld-fieldvalue = ws_postcode .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
    Updating MPRN
          MOVE i_mprn1-mprn TO i_mprn-mprn.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-MPRN'.
          ws_dynpfld-fieldvalue = i_mprn1-mprn .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
        ENDIF.
      ELSEIF sy-subrc EQ 2.
        MESSAGE s005(zspa) WITH ws_postcode .
      ENDIF.
    ENDMODULE.                    "PSTLZ_F4 INPUT
    MODULE MPRN_F4 INPUT
    MODULE mprn_f4 INPUT.
    reading post code
    DATA: stepl TYPE systepl,
           stepl_index TYPE systepl.
      CLEAR: stepl, stepl_index.
      CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
      lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields-stepl     = stepl.
      APPEND lt_dynpfields. CLEAR lt_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = c_x
          determine_loop_index = c_x
        TABLES
          dynpfields           = lt_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields INDEX 1.
      ENDIF.
      ws_outcode = lt_dynpfields-fieldvalue.
      stepl_index = lt_dynpfields-stepl.
      REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
      IF NOT lt_dynpfields-fieldvalue IS INITIAL.
        MOVE lt_dynpfields-fieldvalue TO ws_outcode.
        ws_len = STRLEN( lt_dynpfields-fieldvalue ).
        IF ws_len GE 7.
          ws_len = ws_len - 3.
         ws_icode = ws_code+ws_len(3).
          lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
          CONCATENATE lt_dynpfields-fieldvalue '%'
              INTO ws_outcode.
          CONDENSE lt_dynpfields-fieldvalue.
       REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
        ELSE.
          CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
            INTO ws_outcode.
        ENDIF.
       ws_ocode = ws_code+0(3).
      ENDIF.
    reading MPRN
      CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
      lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
      lt_dnpfields-stepl     = stepl_index.
      APPEND lt_dnpfields. CLEAR lt_dnpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = lt_dnpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dnpfields INDEX 1.
      ENDIF.
    MPRN blank and Post code exist
      IF lt_dnpfields-fieldvalue IS INITIAL.
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode.
        ELSE.
    MPRN blank and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1.
        ENDIF.
      ELSE.
    MPRN exist and Post code exist
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode AND
                       mprn EQ lt_dnpfields-fieldvalue.
        ELSE.
    MPRN exist and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE mprn EQ lt_dnpfields-fieldvalue.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'MPRN'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select MPRN'
          value_org       = 'S'
        TABLES
          value_tab       = i_mprn1 "lt_mprn
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
        IF sy-subrc EQ 0.
    Updating MPRN
          MOVE i_mprn1-mprn TO i_mprn-mprn.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-MPRN'.
          ws_dynpfld-fieldvalue = i_mprn1-mprn .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
    **code changed by laxman 10.08.2005
         ws_dynpfld-stepl  = mprn-current_line.
    **code changed by laxman 10.08.2005
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
    Updating post code
          CONCATENATE i_mprn1-outcode  i_mprn1-incode
                        INTO ws_postcode
                             SEPARATED BY space.
          MOVE ws_postcode TO i_mprn-post_code.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-POST_CODE'.
          ws_dynpfld-fieldvalue = ws_postcode .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
    **code changed by laxman 10.08.2005
         break gblap0.
         ws_dynpfld-stepl  = mprn-current_line.
         LOOP AT i_mprn.
           MOVE i_mprn1-mprn TO i_mprn-mprn.
           MOVE ws_postcode TO i_mprn-post_code.
           MODIFY i_mprn INDEX
                    mprn-current_line." transporting MPRN POST_CODE.
         ENDLOOP.
    **code changed by laxman 10.08.2005
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
        ENDIF.
      ELSEIF sy-subrc EQ 2.
        MESSAGE s006(zspa) WITH i_mprn1-mprn .
      ENDIF.
    ENDMODULE.                    "MPRN_F4 INPUT
    MODULE GNTC_F4 INPUT
    MODULE gntc_f4 INPUT.
      DATA: BEGIN OF lt_gntc OCCURS 0,
              gntc LIKE iflot-zzgntc,
            END OF lt_gntc.
      CLEAR:   lt_returntab, lt_gntc.
      REFRESH: lt_returntab, lt_gntc.
      lt_gntc-gntc = 'DM'.
      APPEND lt_gntc. CLEAR lt_gntc.
      lt_gntc-gntc = 'NDM'.
      APPEND lt_gntc. CLEAR lt_gntc.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'ZZGNTC'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select Gas Nomination Type Code'
          value_org       = 'S'
        TABLES
          value_tab       = lt_gntc
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        i_mprn-dm_ndm = lt_returntab-fieldval.
      ENDIF.
    ENDMODULE.                    "GNTC_F4 INPUT
    *&      Module  mprn1_f4  INPUT
          text
    MODULE mprn1_f4 INPUT.
      DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
            lt_returntab1  LIKE ddshretval OCCURS 0 WITH HEADER LINE,
            lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
            lt_dnpfields1  LIKE dynpread OCCURS 0 WITH HEADER LINE.
      DATA: stepl1 TYPE systepl,
            stepl_index1 TYPE systepl.
      DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
             ws_dyname1     LIKE d020s-prog,
             ws_dynumb1     LIKE d020s-dnum,
             ws_dynpfld1    LIKE dynpread.
      CLEAR: i_dnpfld1,  ws_dyname1, ws_dynumb1, ws_dynpfld1,
             lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
             stepl1, stepl_index1.
      REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
    To Determine Steploop Index
      lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields1-stepl     = stepl1.
      APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
          determine_loop_index = 'X'
        TABLES
          dynpfields           = lt_dynpfields1
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields1 INDEX 1.
      ENDIF.
      stepl_index1 = lt_dynpfields1-stepl.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'IFLOT'
          fieldname         = 'I_MPRN-MPRN'
          searchhelp        = 'ZS_MPRN_PC'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
        TABLES
          return_tab        = lt_f4
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Update tablecontrol
      READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-mprn.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-MPRN'.
        ws_dynpfld1-fieldvalue = i_mprn-mprn.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
      CLEAR  : i_dnpfld1, ws_dynpfld1.
      REFRESH: i_dnpfld1.
      READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-post_code.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-POST_CODE'.
        ws_dynpfld1-fieldvalue = i_mprn-post_code.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " mprn1_f4  INPUT
    *&      Module  pstlz1_f4  INPUT
          text
    MODULE pstlz1_f4 INPUT.
      CLEAR: i_dnpfld1,  ws_dyname1, ws_dynumb1, ws_dynpfld1,
              lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
              stepl1, stepl_index1.
      REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
    To Determine Steploop Index
      lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
      lt_dynpfields1-stepl     = stepl1.
      APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
          determine_loop_index = 'X'
        TABLES
          dynpfields           = lt_dynpfields1
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields1 INDEX 1.
      ENDIF.
      stepl_index1 = lt_dynpfields1-stepl.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'IFLOT'
          fieldname         = 'I_MPRN-POST_CODE'
          searchhelp        = 'ZS_MPRN_PC'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
        TABLES
          return_tab        = lt_f4
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Update tablecontrol
      READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-post_code.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-POST_CODE'.
        ws_dynpfld1-fieldvalue = i_mprn-post_code.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
      CLEAR  : i_dnpfld1, ws_dynpfld1.
      REFRESH: i_dnpfld1.
      READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-mprn.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-MPRN'.
        ws_dynpfld1-fieldvalue = i_mprn-mprn.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " pstlz1_f4  INPUT
    Regards,
    Prakash.

  • Unable to create Metadata connection for Dictionary Provider

    Hi,
    I am getting the following error while I try to run a Web Dynpro Application;
    The initial exception that caused the request to fail, was:
       com.sap.dictionary.runtime.DdException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
        at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:191)
        at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:146)
        at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:97)
        at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:79)
        at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
        ... 37 more
    The JCo Connections are tested and pinged, they work fine.
    Can anyone please tell what the error could be?

    The details exception list is as below:
    com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type com.dow.dc.model.types.Syuname could not be loaded: com.sap.dictionary.runtime.DdException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
         at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
         at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.dictionary.runtime.DdException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:191)
         at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:146)
         at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:97)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:79)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
         at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
         at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
         ... 34 more

  • How to create search path for the file on the desktop..

    hello experts..
          I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
    thanks

    HI
      If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
    F4_FILENAME
    this FM helps to locate and select the desired file from the system.
    Sample code that you can check is
    How to get windows filename
    PARAMETERS: lv_file LIKE rlgrap-filename.
    Method 1
        CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
        EXPORTING
        MASK = u2019,.txt,.*u2019
        STATIC = u2019Xu2019
        CHANGING
        FILE_NAME = LV_FILE.
    Method 2
    CALL FUNCTION u2019F4_FILENAMEu2019
    EXPORTING
             program_name = syst-cprog
             dynpro_number = syst-dynnr
             field_name  = u2019 u2019
         IMPORTING
             file_name   = LV_FILE.
    Regards
    Pavan

  • How to create search help for Web Dynpro?

    Hi all,
    I have troubles when creating search help for web dynpro. I have visited this link /people/dirk.rehberg/blog/2006/12/27/generic-search-help-for-web-dynpro-for-java but I can't find this generic search help plug-in for download. If u have this plug-in can u share it for me or upload somewhere for download. Or anyone has already done this search help please help me solve this problem! Thanks in advance!

    Hi Dinh Thieu Thien,
    please place such a request to the appropriate forum "[Web Dynpro for Java|Web Dynpro Java;".
    Thanks and regards,
    Boris

  • How to create  search help for field in interactive adobe form

    HI
    I want to create search help for PERNR field in adobe form.
    how i can do it.
    Can any one giud me.
    Regards,
    Laxman Sankhla

    Hi Laxman,
    Please search SDN, there are lots of queries posted and solved earlier on this.
    especially there are step by step blogs.
    Cheers,
    Sai

  • "Bridge is unable to create a JPG for this file"

    Some of my exports to Flickr fail with this message. These a larger file but within flickr limits. Does anyone know what are the limitations set by bridge.

    I am having the same problem.
    It worked perfectly until about 6 weeks ago. Then I started getting the error message.  If I selected the images from the exact same directory and dropped them on the export tab, they would usually work.  Also if I took 5 or less images, It would usually work, so I don't hink there is any problem with the directoiry or the files.
    I have reinstalled brif=deg and photoshop.  it is now CS5.1 and all was stable. for a week and now I am having the problem that Bridge is unable to create a jpg for this file.  
    Previously, I did not notice that erroe message, so I could have been having some other error, but now this is the one I am having.  I am not trying to change the size of these images.  Just convert from nef and photoshop to jpeg.

  • Error: "Unable to create a shortcut for MyApp" on Windows 2008

    When I try to install my JAVA app on windows 2008 via Java Web Start, it pop up a error message "Unable to create a shortcut for MyApp". The app can startup and work correctly after clicking "ok" on error message. BUT, there is no shortcut created on Desktop or Start Menu.
    This problem occured on Windows 2008 ONLY. I have test the installation process on different OS with JRE 6u14 and 6u20:
    Windows XP PASS
    Windows 7 PASS
    Windows 2003 PASS
    Windows 2008 FAIL, can't create shortcut on Desktop and Start Menu
    And I have test the demos on http://pscode.org/jws/api.html, the problem is same.
    Does any one has any idea on this?

    AndrewThompson64 wrote:
    - Menu items do not work on Ubuntu Linux at all.
    - As a result of that, I am thinking to declare neither desktop shortcuts nor menu items in the JNLP file, but instead using the IntegrationService(1) to perform more specific tests, and offer the end user whatever is available.
    - This is probably a better strategy overall, because if you automatically create desk-top shortcuts (or menu items) for the user, you will discover there is always someone who considers them an unnecessary bother.
    1) BTW - I have been meaning to do a demo. of the IntegrationService and add it to the other examples at PSCode, but have not yet found the time. ;-)Thanks for reply.
    But I don't understand very clear. I'm focus on the windows platform not Linux. Do you suggest to create shortcuts and menu items manually by coding in Applet?
    I prefer to use the JNLP file cause it works good on the other OS than to change my code.
    What I want to know is:
    1. Is it a bug for JRE on Windows 2008?
    2. If NO, how can I make it work on Windows 2008? Do I need change some System Setting or Browser Setting?
    3. If YES, maybe I can try to change my code, but why there is no bug filed in the Bug Database?
    BTW, I use the IE browser.

  • DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.

    All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008.  When I try to login to the Web Client I keep getting this error.
    DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
    Can you please help

    This might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
    if this is the case then
    1. Open the DRM Configuration Console.
    2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
    3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
    4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
    Thanks,
    ~KKT~

Maybe you are looking for