Unable to Create Term Within a TermSet
Hi,
I am trying to create term inside an existing termset. Following is my code
I am trying to create a term if it doesn't exist in termset. Following is my code
using (SPSite mySite=new SPSite(URL,SPUserToken.SystemUser))
uisng (SPWEb myWeb= mySite.OpenWeb())
TaxonomySession session = new TaxonomySession(myWeb.Site);
TermStore termStore = session.TermStores[TermStoreName];
Group group = termStore.Groups("testGroupName");
//var termSet = group.TermSets["existingTermSet"];
TermSet ts=null;
ts=group.TermSets["existingTermSet"];
int lcid = CultureInfo.CurrentCulture.LCID;
ts.CreateTerm("ABC",lcid);
This throws an error saying "Value cannot be null" in the following line:
ts.CreateTerm("ABC",lcid);
I am really puzzled by this error.
Please suggest me an alternative or root cause so that I can proceed. I am at a loss right now.
I have to use Server Side Object Model and not CSOM
Hi,
Can you please verify your code with example provided in the below link, it will sure helpful.
http://www.c-sharpcorner.com/UploadFile/54db21/create-term-in-sharepoint-2010-programmatically-using-vs-201/
Regards,
MS
Similar Messages
-
Unable to create a subtask within a task for cProjects
Hi All,
I am unable to create a subtask within a task using BAPI_BUS2175_CREATE. When I pass the GUID of the project definition and fill the corresponding task structures to the BAPI, a task gets created at the phase level. But when I pass the GUID of the task along with the task
information, subtask does not get created. The BAPI returns the following error message:
DPR_SHARED 051: You cannot create Task for (Task Name).
Steps for recreating the error message are:
1. GUID is found out using function module CONVERSION_EXIT_DPRCE_INPUT.
2. GUID and task information is passed to BAPI_BUS2175_CREATE.
3. Task is created if project definition GUID is passed, but if task GUID is passed, there is no subtask created. An error message is displayed:
DPR_SHARED 051: You cannot create Task for (Task Name).
Any help would be appreciated.
Thanks,
TomHi all,
I have used the same and it works absolutely fine.
here is a code sample
CONSTANTS:
lc_rfc_none TYPE string VALUE 'NONE'. " RFC on same server
DATA:
lv_header_task_guid TYPE bapi_ts_guid-parent_guid, " Header Task GUID
ls_sub_task TYPE bapi_ts_task,
ls_sub_task_upd TYPE bapi_ts_task_upd,
lt_crtask_return TYPE TABLE OF bapiret2,
ls_extension_in TYPE bapiparex,
ls_extension_out TYPE bapiparex,
lv_task_guid TYPE bapi_ts_guid-parent_guid. " Task GUID
* Assign sub-task name. (Task Number is internally generated)
ls_sub_task-task_name = 'ST 1.1'.
ls_sub_task_upd-task_name = 'X'.
* Assign Sort Number
ls_sub_task-sort_number = '00010'.
ls_sub_task_upd-sort_number = 'X'.
* Assign Duration
ls_sub_task-duration = 30.
ls_sub_task_upd-duration = 'X'.
* Assign Work.
ls_sub_task-planned_work = 240.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
EXPORTING
input = 'H'
IMPORTING
output = ls_sub_task-planned_work_unit
EXCEPTIONS
unit_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ls_sub_task_upd-planned_work = 'X'.
ls_sub_task_upd-planned_work_unit = 'X'.
CALL FUNCTION 'BAPI_BUS2175_CREATE'
DESTINATION lc_rfc_none
EXPORTING
iv_parent_guid = lv_header_task_guid
is_task = ls_sub_task
is_task_upd = ls_sub_task_upd
is_extension_in = ls_extension_in
IMPORTING
es_extension_out = ls_extension_out
TABLES
return = lt_crtask_return.
* If task is successfully created,
READ TABLE lt_crtask_return WITH KEY type = lc_success number = '114'.
IF sy-subrc = 0.
* Get task GUID
lv_task_guid = lt_crtask_return-message_v1.
CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
DESTINATION
lc_rfc_none
TABLES
return = lt_bapiret2.
endif.
In order to find the GUID of the header task use function module:
DPR_GET_GUID_BY_ID_FROM_DB
with IV_Number = task number for the header task and IV_OBJECT_TYPE = TTO
Read the documentation for 'BAPI_BUS2175_CREATE' before using it.
make sure you have maintained IS_TASK_UPDATE structure as well.
Regards,
Reema. -
Hi,
I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
[ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
Oh, and this happens only with the projects which deal with JMS queues.
We are using OSB:
Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
Please help.
Thanks,
Mukund.Hi,
I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
[ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
Oh, and this happens only with the projects which deal with JMS queues.
We are using OSB:
Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
Please help.
Thanks,
Mukund. -
SRM 7.0 Unable to create PO - Classic Scenario.
Hello,
We are able to successfully create the below scenario.
PR in ECC --> Get PR in SRM --> Start Collective processing -> Transfer to Central System (SC is created for the PR @ this time) --> Create RFx --> Rfx Response --> Create PO. (PO is created in ERP, Classic Scenario)
We are able to get the PR & we are able to create SC successfully and the PR/ SC is available in Sourcing cocpit.
Able to create RFx --> Rfx Response.
Now once the RFx Response is Accepted --> We go for creating PO.
Classic Scenario.
The error is due to pricing - debugged and checked as mentioned in my earlier message.
IPC pricing is switched off and the BADI for simple pricing is activated.
Error : " Message A BBP_PD 396 cannot be processed in plugin mode HTTP "
But this is due to pricing is what i guess.
Error is raised in FM "BBP_PDPRC_UPDATE".
Kindly Suggest.
Unable to Create PO
Regards.
Edited by: Purshothaman P on Jul 6, 2010 1:50 PMHi,
Please check and run the following reports (se38): BBP_CND_CUSTOMIZING_CHECK & RSVMCRT_HEALTH_CHECK and post back the results.
Note for BBP_CND_CUSTOMIZING_CHECK also run 'Simulation of Pricing with Manual Price' (scroll down after executing the report initially).
Also the badi information you activated tells us a lot. Although i take it that you executed and read everything that's included in the transaction information. The following sentence gives a prety doubtfull feeling for the CPPR scenario to work for your configuration:
SAP recommends using this BAdI only in exceptional cases and only after checking thoroughly if it is compatible with the Business Scenarios used.
Note: From what i've just read IPC has to be disabled, certain badi's etc. need to be disabled. And VMC (sap basis) has to be configured. Please view: [http://help.sap.com/SCENARIOS_BUS2008/helpdata/EN/9C/F90B7CB34A4889935D1733C6756D5B/content.htm]
Could you also please check and provide whether 'normal' SRM classic scenarios like: SC -> PO do run within your system. Also the error and information you have provided is very little.
Kind regards,
Tim -
Unable to create database error
Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
ThanksThere is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Unable to create IDOCs after client copy
I'm unable to create IDOCs after a client copy. I receive a SAPSQL_ARRAY_INSERT_DUPREC or insert of duplicate rows ABAP dump.
Does anyone know what how to fix this. Thank you in advance.
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Date and Time 22.10.2007 16:50:51
ShrtText
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEDI1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"F09_IDOC_INSERT_WITH_NUMBER" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLEDI1" or "LEDI1F09"
"F09_IDOC_INSERT_WITH_NUMBER"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"F09_IDOC_INSERT_WITH_NUMBER"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "auaplxr3q"
Network address.......... "128.197.135.5"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "000B439ED600"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "auaplxr3q"
Database type............ "ORACLE"
Database name............ "Q63"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Mar 22 2007 20:48:46"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "175"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 1469352
MM Free.................. 2718056
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPLEDI1" in
"F09_IDOC_INSERT_WITH_NUMBER".
The main program was "SAPMSSY1 ".
The termination occurred in line 108 of the source code of the (Include)
program "LEDI1F09"
of the source code of program "LEDI1F09" (when calling the editor 1080).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F09_IDOC_INSERT_WITH_NUMBER" "(FORM)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLEDI1 ". Its source code starts in line 5
of the (Include) program "LEDI1F09 ".
Source Code Extract
Line
SourceCde
78
perform call_badi tables list_container_insert
79
using control
80
ident.
81
Aufruf des Badi's für das einstreuen neuer Segmente
82
perform call_insert_badi tables list_container_insert
83
using control
84
ident
85
changing maxsegnum.
86
87
free list_container_insert
88
FREE_RETURN = 1.
89
ELSE. " no other IDoc is open in create-mode
90
LOOP AT LIST_CONTAINER_CREATE WHERE MANDT EQ SY-MANDT
91
AND DOCNUM EQ IDENT.
92
LIST_CONTAINER_CREATE-DOCNUM = DOCNUM.
93
MODIFY LIST_CONTAINER_CREATE.
94
ADD 1 TO MAXSEGNUM.
95
ENDLOOP.
96
if control-mestyp eq c_mestyp.
97
CALL FUNCTION 'FUNCTION_EXISTS'
98
EXPORTING
99
funcname = c_func
100
EXCEPTIONS
101
FUNCTION_NOT_EXIST = 1.
102
IF syst-subrc IS INITIAL. "Anwendungssystem
103
perform call_transform
104
tables list_container_create
105
using control.
106
ENDIF.
107
endif.
>>>>>
INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE.
109
Aufruf des Badi's für das Anwendungsmapping einzelner Felder
110
perform call_badi tables list_container_create
111
using control
112
ident.
113
perform call_insert_badi tables list_container_create
114
using control
115
ident
116
changing maxsegnum.
117
118
free list_container_create
119
FREE_RETURN = 0.
120
ENDIF.
121
122
insert status records
123
124
SYN_ERROR_IN = ' '.
125
CNTR_STATUS = 0.
126
REFRESH LIST_STATUS.
127
CLEAR LIST_STATUS.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FORM SAPLEDI1 LEDI1F09 108
F09_IDOC_INSERT_WITH_NUMBER
12 FUNCTION SAPLEDI1 LEDI1U19 33
EDI_DOCUMENT_CLOSE_CREATE_TAB
11 FUNCTION SAPLEDIR LEDIRU01 273
IDOC_INBOUND_WRITE_TO_DB
10 FORM SAPLEDIN LEDINF01 457
ONE_IDOC_STORE
9 FUNCTION SAPLEDIN LEDINU05 234
IDOC_INBOUND_ASYNCHRONOUS
8 FORM SAPLEDIN LEDINV05 19
IDOC_INBOUND_ASYNCHRONOUS
7 FORM SAPMSSY1 SAPMSSY1 254
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 59
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 229
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCV02 28
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 69
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 13 Ty. FORM
Name F09_IDOC_INSERT_WITH_NUMBER
CONTROL-MESTYP
USERCLONE
554544444222222222222222222222
53523CFE5000000000000000000000
C_MESTYP
FIDCCH
444444222222222222222222222222
694338000000000000000000000000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
LIST_STATUS-STAPA2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
C_FUNC
IDOC_TRANSFORM
444455544544542222222222222222
94F3F421E36F2D0000000000000000
SYST-REPID
SAPLEDI1
5454444322222222222222222222222222222222
310C549100000000000000000000000000000000
SY-UNAME
Q63CLNT140
533444533322
1633CE414000
%_DUMMY$$
2222
0000
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SYST-SUBRC
0
0000
0000
ALE_IDOC_TO_APL_OK
62
33
62
LIST_CONTAINER_CREATE[]
Table IT_20[9x1068]
FUNCTION-POOL=EDI1DATA=LIST_CONTAINER_CREATE[]
Table reference: 14
TABH+ 0(20) = 070000008036F5B8000000000000000000000000
TABH+ 20(20) = 0000000E00000014000000090000042CFFFFFFFF
TABH+ 40(16) = 0400002300000CA0000824C401000000
store = 0x070000008036F5B8
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 14 (0x0000000E)
label = 20 (0x00000014)
fill = 9 (0x00000009)
leng = 1068 (0x0000042C)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000048
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000008036F610
pghook = 0x07000000802D86D0
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 23 (0x00000017)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LIST_CONTAINER_CREATE
1400000000000511747000000009E1BPADRML 00000002#èXD63 070TST_QA140_1
3333333333333333333333333333434544544222222222222222222222333333330E54332222222233355555433353
14000000000005117470000000095120142DC0000000000000000000000000000238846300000000070434F11140F1
CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
G_MAXSYNERR
1
0000
0001
<%_TABLE_EDID4>
ALE_DISPATCH_ERROR
27
33
27
ALE_IDOC_READY_FOR_APL
64
33
64
%_SPACE
2
0
IDENT
0000000000000001
3333333333333333
0000000000000001
ALE_IDOC_TO_APL_ERROR
63
33
63
No. 12 Ty. FUNCTION
Name EDI_DOCUMENT_CLOSE_CREATE_TAB
IDENTIFIER
0000000000000001
3333333333333333
0000000000000001
NO_DEQUEUE
X
5
8
SYN_ACTIVE
Y
5
9
IDOC_CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
SYNTAX_RETURN
0
0000
0000
INT_EDIDD[]
Table IT_10[9x1062]
FUNCTION-POOL=EDINDATA=G_T_DATA_RECORDS[]
Table reference: 9
TABH+ 0(20) = 0700000080284B80070000008028530800000000
TABH+ 20(20) = 000000090000000A0000000900000426FFFFFFFF
TABH+ 40(16) = 0400000900000AA8000824C401000000
store = 0x0700000080284B80
ext1 = 0x0700000080285308
shmId = 0 (0x00000000)
id = 9 (0x00000009)
label = 10 (0x0000000A)
fill = 9 (0x00000009)
leng = 1062 (0x00000426)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000039
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000080320D90
pghook = 0x07000000802E1508
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 17 (0x00000011)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802852A8
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080284B30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
NO_IGNORE
2
0
EDI_IDOC_SYNTAX_ERROR_IN
60
33
60
DOCNUM
0000000000511747
3333333333333333
0000000000511747
EXCLUSIVE
E
4
5
SYNCHRONOUS
S
5
3
APL_TESTIDOC_CHECK_OK
55
33
55
FREE_RETURN
0
0000
0000
INT_EDIDD
1400000000000000001000009E1BPADRML 00000000##XD63 070TST_QA140_17 X00
3333333333333333333333333434544544222222222222222222333333330054332222222233355555433353322533
14000000000000000010000095120142DC0000000000000000000000000000846300000000070434F11140F1700800
SUB_INT_ACK_POSITIVE
14
33
14
G_INSERT_OK
2
0
LIST_CONTAINER_INSERT_TMP[]
Table[initial]
LIST_CONTAINER_INSERT_TMP
0000000000000000000000000 00000000##
2223333333333333333333333333222222222222222222222222222222333333330022222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 11 Ty. FUNCTION
Name IDOC_INBOUND_WRITE_TO_DB
PI_DO_HANDLE_ERROR
X
5
8
PI_NO_DEQUEUE
X
5
8
PI_RETURN_DATA_FLAG
X
5
8
PI_RFC_MULTI_CP
0000
3333
0000
PI_STATUS_MESSAGE
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PE_IDOC_NUMBER
0000000000000001
3333333333333333
0000000000000001
PE_INBOUND_PROCESS_DATA
140BAPI 6
3334454222222222222222222222222222222222222222222222222223222222222222222222222222222222222222
1402109000000000000000000000000000000000000000000000000006000000000000000000000000000000000000
PE_STATE_OF_PROCESSING
0
0000
0000
T_DATA_RECORDS[]
Table IT_10[9x1062]
T_LINKED_OBJECTS[]
Table IT_11[0x100]
FUNCTION-POOL=EDINFORM=ONE_IDOC_STOREDATA=LT_LINKED_OBJECTS[]
Table reference: 10
TABH+ 0(20) = 000000000000000007000000802853F000000000
TABH+ 20(20) = 0000000A0000000B0000000000000064FFFFFFFF
TABH+ 40(16) = 0400000900002BB00010249401000000
store = 0x0000000000000000
ext1 = 0x07000000802853F0
shmId = 0 (0x00000000)
id = 10 (0x0000000A)
label = 11 (0x0000000B)
fill = 0 (0x00000000)
leng = 100 (0x00000064)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000190
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x0700000080285390
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080285340
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
PC_CONTROL_RECORD
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
L_STATUS
64
33
64
L_ALE_SUCCESS_MESSAGE
B1 S005 No filters
4322222222222222222253332222222222222222222222222222222222222222222222222246266676772222222222
21000000000000000000300500000000000000000000000000000000000000000000000000EF069C45230000000000
ST_PREVIOUS_PARTNER_DATA-SYNCHK
X
5
8
C_TRUE
X
5
8
SYST-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
C_ELEMENT_UNPROCESSED_IDOCS
Unprocessed_IDocs
56776667766544667222222222222222
5E02F353354F94F33000000000000000
ST_PREVIOUS_STATE_OF_PROCE
0
0000
0000
ST_INBOUND_PROCESS_DATA-EDIVR2
6
3
6
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
L_SYN_ACTIVE
Y
5
9
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
L_SYNTAX_RETURN
0
0000
0000
%_DUMMY$$
2222
0000
SY-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
No. 10 Ty. FORM
Name ONE_IDOC_STORE
IDOC_NUMBER_IN
0000000000000000
3333333333333333
0000000000000000
STATE_OF_PROCESSING_IN
0
0000
0000
INBOUND_PROCESS_DATA_IN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS[]
Table[initial]
G_LAST_IDOC_NUMBER
0000000000000000
3333333333333333
0000000000000000
SYST-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
CURRENT_CONTROL_RECORD_IN-DOCNUM
0000000000000000
3333333333333333
0000000000000000
CONV_ERROR
2
0
C_TRUE
X
5
8
SY
0000000000000000000000000000000000000000000000000000000000000000000000000000000200000000000000
0002000000010009000000000000000000000000000100000001000000010000000000000000004C00000000000000
STATUS_MESSAGE_IN
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_IDOC_SELECT_AND_WRITE_TO_DB
5
3
5
SY-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
STATUS_MESSAGE_IN-STAMID
22222222222222222222
00000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
STATUS_MESSAGE_IN-STAMNO
000
333
000
RET_FLAG
X
5
8
G_RFC_CODEPAGE
0000
3333
0000
RSJOBINFO-JOBSUBRC
0
0000
0000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
SY-LANGU
E
4
5
G_T_DATA_RECORDS[]
Table IT_10[9x1062]
LT_LINKED_OBJECTS[]
Table IT_11[0x100]
CURRENT_CONTROL_RECORD_IN
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
SWO_%OBJID
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 9 Ty. FUNCTION
Name IDOC_INBOUND_ASYNCHRONOUS
IDOC_CONTROL_REC_40[]
Table IT_3[1x524]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_CONTROL_REC_40[]
Table reference: 3
TABH+ 0(20) = 07000000802D876007000000802D449000000000
TABH+ 20(20) = 0000000300000003000000010000020C000000E0
TABH+ 40(16) = 0400000900001FE0000A249001000000
store = 0x07000000802D8760
ext1 = 0x07000000802D4490
shmId = 0 (0x00000000)
id = 3 (0x00000003)
label = 3 (0x00000003)
fill = 1 (0x00000001)
leng = 524 (0x0000020C)
loop = 224 (0x000000E0)
xtyp = TYPE#000136
occu = 10 (0x0000000A)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802DB9D8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 10 (0x0000000A)
lineAlloc = 10 (0x0000000A)
store_id = 9 (0x00000009)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802D88A0
>>>>> 2nd level extension part <<<<<
tabhBack = 0x07000000802D8710
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
IDOC_DATA_REC_40[]
Table IT_4[9x1063]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_DATA_REC_40[]
Table reference: 4
TABH+ 0(20) = 07000000802D880807000000802D896000000000
TABH+ 20(20) = 00000004000000040000000900000427FFFFFFFF
TABH+ 40(16) = 04000009000020500008249001000000
store = 0x07000000802D8808
ext1 = 0x07000000802D8960
shmId = 0 (0x00000000)
id = 4 (0x00000004)
label = 4 (0x00000004)
fill = 9 (0x00000009)
leng = 1063 (0x00000427)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000138
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802E1550
pghook = 0x07000000802D8860
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 12 (0x0000000C)
shmIsReadOnly = 0 (0xHi Rohan,
Welcome to SDN!
This error means that you're trying to duplicate a record on the DB... check the IDOC number ranges... it might help
Regards
Juan
Please reward with points if helpful -
Unable to create RAID on SPARC-Enterprise-T5220
hi:
i got the following issue on my SPARC-Enterprise-T5220.
i have constructed the RAID-1 on 4 disks out of 6.
i have created RAID-1 on OS Disks using raidctl command on single user mode
and i have created RADI-1 on other two disks. but i'm unable to create RAID-1 on the rest of the two disks.
here i s the info i am giving
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@0/pci@0/pci@2/scsi@0/sd@0,0
1. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@0/pci@0/pci@2/scsi@0/sd@1,0
2. c1t2d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 273>
/pci@0/pci@0/pci@2/scsi@0/sd@2,0
3. c1t4d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 136>
/pci@0/pci@0/pci@2/scsi@0/sd@4,0
disks 2 and 3 are under raid but where as 0 and 1 are not
i am trying to construct raid on that disks it is giving following error
# raidctl -c c1t0d0 c1t1d0
Creating RAID volume will destroy all data on spare space of member disks, proceed (yes/no)? yes
Too many arrays.
here is my OS release information
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
SunOS 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
would any body help me on this.
thanks in advance
SNHello sir,
I work for one of Sun's Channel Development Partners and had a partner site the same problem today, but with a T5240.
If you check with the "Disk Volumes" section of the T5120/T5220 Admin Guide, it tells us that the integrated LSI controller only supports up to two volumes at a time.
http://docs.sun.com/source/820-2179-10/Volume-man.html#50606103_28600
If you need more options for hardware RAID configuration of the internal disks, Sun offers an internal PCI-E SAS RAID HBA:
SGXPCIESAS-R-INT-Z
Sun StorageTek (TM) 8-port internal SAS RAID Host Bus Adapter with RAID 0, 1, 1E, 10, 5, 5EE, 50, 6, 60 support, 256MB of onboard memory and 72 hour Battery Backed Write Cache. RoHS 6. X-Option.
List Price: $599
You'd also want this cable kit to go with it:
SEDX9SA2Z
Internal SAS Cable Kit required to use Sun RAID Card SG(X)PCIESAS-R-INT-Z for use with the SPARC Enterprise T5220
List Price: $40
Here is documentation about the adapter:
http://docs.sun.com/app/docs/coll/sas-raid-hba-int -
Unable to create temporary backing file
My program is throwing out the error:
temporary open: /var/tmp/BDB20825: Too many open files
unable to create temporary backing file
This happens after my program has been running for about 4 hours. The program appears to run out of file descriptors. The listing of /proc/<PID>/fd shows hundreds of lines naming the same file (/var/tmp/BDB20825), like this:
lrwx------ 1 zobell users 64 Jul 28 14:41 622 -> /var/tmp/BDB20825 (deleted)
That file does not exist. I suspect that someone is deleting but failing to close the file. A few open file descriptors with this deleted file occur slowly in the early hours, but not at a fast enough rate to bring the program down when it does. It looks like there is a sudden flood at the end.
The program repeats this error slowly, and is stuck inside the db code. Here is the gdb backtrace I am seeing every time I interrupt:
(gdb) where
#0 0x00e74410 in __kernel_vsyscall ()
#1 0x003d51dd in ___newselect_nocancel () from /lib/libc.so.6
#2 0x002e5d39 in __os_sleep () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#3 0x002e43f1 in __os_openhandle () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#4 0x002e52ad in __os_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#5 0x002c0357 in __db_tmp_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#6 0x002c006c in __db_appname () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#7 0x002d50c9 in __memp_bhwrite () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#8 0x002d4a27 in __memp_alloc () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#9 0x002d62ec in __memp_fget () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#10 0x00232003 in __bam_new_file () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#11 0x002abc79 in __db_new_file () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#12 0x002abaff in __db_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#13 0x002a5d15 in __db_open_pp () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#14 0x0080644c in Db::open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb_cxx-4.6.so
#15 0x0053ebbe in DbXml::DbWrapper::open (this=0x405bbee0, txn=0x0, type=DB_BTREE, flags=65537, mode=0) at Transaction.hpp:62
#16 0x00549247 in CacheDatabase (this=0x405bbed8, env=0x9c5a848, type=DB_BTREE, compare=0) at CacheDatabase.cpp:28
#17 0x005497e2 in DocDatabase (this=0x405bbed8, env=0x9c5a848, compare=0) at CacheDatabase.cpp:46
#18 0x00584ced in DbXml::Manager::createDocDatabase (this=0x9c5a830, compare=0) at Manager.cpp:694
#19 0x00519467 in DbXml::CacheDatabaseMinderImpl::verify (this=0xfffffdfe, entry=@0x6ac2f790, cid=-514) at CacheDatabaseMinder.hpp:31
#20 0x00519398 in DbXml::CacheDatabaseMinderImpl::findOrAllocate (this=0x6ac5b4f0, cid=1, allocate=true) at CacheDatabaseMinder.cpp:71
#21 0x00518e59 in DbXml::CacheDatabaseMinder::findOrAllocate (this=0x6acd9fa0, mgr=@0x9c5a830, cid=1, allocate=true) at CacheDatabaseMinder.cpp:21
#22 0x0055b12d in LazyDIResults (this=0x6acd9f98, context=0x6acd9fa0, contextItem=0x4979abc0, expr=@0x9ce5de8, txn=0x0, flags=0) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlManager.hpp:80
#23 0x0052f9cd in DbXml::QueryExpression::execute (this=0x9ce5de8, txn=0x0, contextItem=0x4979abc0, context=@0xbfcb0e04, flags=0) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlQueryContext.hpp:86
#24 0x00565a3a in DbXml::XmlQueryExpression::execute (this=0x0, contextItem=@0xfffffdfe, context=@0xbfcb0e04, flags=4294966782) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlValue.hpp:186
#25 0x0805af4b in XmlRecordWithCounts::ExtractQueryString (this=0xbfcb0dd0, select=@0xbfcb0e2c, result=@0xbfcac1d0, qDocument=0xbfcb0e14) at src/XmlRecordWithCounts.cpp:401
#26 0x080585f6 in OdRecord::GetRequiredContent (this=0xbfcb0dd0, name=@0xbfcac1e0, origin=@0xbfcac1d0, dest=@0xbfcac1c0, type=@0xbfcac1b0, dist=@0xbfcac198, totalCount=@0xbfcac194, route=@0xbfcac1a0, qDocument=0x0) at src/OdRecord.cpp:143
#27 0x0804d9c3 in ProcessOd (fpPrivate=0x8e11098, odDb=@0xbfcb0dd0, fdDb=@0xbfcb0d20) at src/BuildFdDb.cpp:263
#28 0x0804f4c8 in ProcessOneDest (fpPrivate=0x8e11098, odDb=@0xbfcb0dd0, fdDb=@0xbfcb0d20, dest={static npos = 4294967295, _M_dataplus = {<std::allocator<char>> = {<No data fields>}, Mp = 0x9da758c "LAX"}, static Sempty_rep_storage = {0, 0, 69041, 0}}) at src/BuildFdDb.cpp:464
#29 0x080501cd in main (argc=6, argv=0xbfcb10c4) at src/BuildFdDb.cpp:589
At this time, the program is trying to extract fields out of an XmlDocument that is the result of a query. The program uses a pre-calculated XmlQueryExpression to extract a specific field. This may not be the best way to extract a field from a document, given the apparent overhead of needing a temporary file!
My program queries two database files (OD.dbxml and FD.dbxml.new), and uses the information to add records to the second file. The databases are rather big:
bash-3.2$ ls -l /tmp/*dbxml*
-rw-rw---- 1 zobell users 5233745920 Jul 28 14:42 /tmp/FD.dbxml.new
-rw-rw---- 1 zobell users 6539427840 Jul 13 10:16 /tmp/OD.dbxml
(I keep them in /tmp because everywhere else uses NFS and performance is awful with NFS.)
My environment:
Red Hat Enterprise Linux Client release 5.3 (Tikanga) 32 bit.
Berkeley DB XML 2.4.16, C++ interface.
Disk space should not be an issue:
bash-3.2$ df /tmp /var
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-tmp
28948572 13044384 14409968 48% /tmp
/dev/mapper/VolGroup00-root
144742920 5333544 131938272 4% /
I ran this program about a year ago and did not see this issue. I have made a few changes and linked to the newer version of the XML database since then. Any help is appreciated.I have more information about this problem.
If I "disable" the routine __os_zerofill() in os_fzero.c, by having it always return (0), I no longer get an exception and my application appears to run smoothly. However, I have not determined what in this routine leads to the exception. And, I have no idea what the short and long term consequences of "disabling" this routine will be....
-Coralie -
Acrobat 8 Pro now unable to create pdf files
Been using Acrobat 8 for well over a year. Installed new release of AutoCAD 2012, now unable to create pdf files from AutoCAD or MS Office programs. Can anybody help?
You may still want to at least give a repair a shot. Won't hurt and sometimes customer suport (I assume you mean Adobe customer support?) will miss some things. I believe in your version you can find it under the Help menu.
BtlMage918 wrote:
No because the
customer support person I spoke with first said the problem was within the
creation portion of the program and did not fell that reinstallation or
deactivate/activate would resolve.
Charles Blake
Annette Miller Architects
204 S. Ludlow St., Suite 310
Dayton, Ohio 45402
937.228.7841
<http://www.amillerarchitects.com/> www.amillerarchitects.com -
Unable to create xml from xml schema
JDeveloper 10.1.3 EA1
I am unable to create a new xml file from an xml schema when the starting root element is a complex type (but it works with a simple type). It does not matter if the xml schema is registered within JDeveloper.
Is this a bug or intended behaviour?
Error message:
''XML Document from XML Schema creation could not be competed succesfully. Make sure the source schema is valid and that you have write permissions to the output directory."
NB The xml schema is valid and I have write permissions on the specified directory.When I do not register this (or other) schema with JDeveloper, I can create an xml document from xml schema. However, when I register this schema and then try to generate an xml document (either from the registered xsd either from a filesystem xsd) with person as starting node it fails with the mentioned error. However, when I use city as starting node it is generated successfully.
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.amis.nl/demo/hrm"
targetNamespace="http://www.amis.nl/demo/hrm"
elementFormDefault="qualified">
<xsd:element name="person">
<xsd:annotation>
<xsd:documentation>
A sample complex element
</xsd:documentation>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" type="xsd:string"/>
<xsd:element name="length" type="xsd:int"/>
<xsd:element name="weight" type="xsd:int" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="city" type="xsd:string">
<xsd:annotation>
<xsd:documentation>
A sample simple element.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:schema> -
I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter -
Unable to create the type with the name 'ODATA'
On a test server with VS 2012 and SQL 2012 installed, I have created an SSIS project in project deployment mode. In the packages of the project I use the Odata source for SSIS. The packages run fine in VS 2012. But when I deploy the package to the Integration
Services catalog on the same server as where I am running VS 2012 I get a deployment error:
‘Failed to deploy project. For more information, query the operation_messages view for the operation identifier '25084'. (Microsoft SQL Server, Error: 27203)'
When I read this message from the SSISDB database, I see the problem with ODATA.
use SSISDB
go
select * from catalog.operation_messages where operation_id = 25084
--Failed to deploy the project. Fix the problems and try again later.:Unable to create the type with the name 'ODATA'.
As I said: the packages with the Odata run without error when tested from within VS2012 on the SAME server. When I deploy the project from Visual Studio I get the error.
For completeness: I have also tried deployment from VS2012 to another server where the SSIS Odata source has bene deployed. Also to no avail.
Jan D'Hondt - SQL server BI developmentThe next possiblity for me was to convert the project to Package deployment and see what the result I get. I have converted my project with package connections from project deployment to Package deployment. Then I deployed the package on the server in MSDB
catalog from SSIS. I.e. I connect with SSMS to Integration Services as an administrator and under the MSDB folder I added a new folder for my package. I then imported the dtsx into the mdsb package store. The Import worked. Still from within SSMS and connected
to the Integration Services, i right-clicked on the package in the MSDB store and selected 'Run package'. In the Execute Package dialog window, I clicked on 'Execute' and the package actually ran. The Odata connector was opened, it read the data and imported
into my database.
This experience made me realize what the real culprit was: The OData connector is a 32-bit connector in SQL Server 2012.
To prove this: with SSMS I connected to the SQL database server and in the Integration services catalog, i right-clicked on the package that was deployed in Project deployment mode, then selected 'Execute...'. In the execute dialog windo in the 'Advanced'
tab I checked 32-bit runtime. And the package ran.
To wrap it all up:
The Project deployment will work, but not with the Odata source as project connection. The Odata connection must be defined in each package as a package connection.
Run the deployed packages in 32-bit mode on the server
Jan D'Hondt - SQL server BI development -
Unable to create the test suits file!
Dear Experts!
Getting the "Unable to create the test suits file!" error while opening .bpel file in JDeveloper 10.1.3.5. Also, all the partner links showing warning symbol. When I click on them, getting the following error:
ERROR:WSDLException: faultCode=INVALID_WSDL: Invalid XML in document at: Start of root element expected.
Looks like partner links are not mapped correctly. Could you please throw some light, where I need to fix the issue.
Appreciate your help.
Thank you.I had similar issue sometimes back, error was because sample xml my test was using wasn't conforming to my code. In my case, I didn't write test suite so deployment was successful and was getting error while testing post deployment. In your case, test suite will execute.
Try to follow your xslt mapping or any xpath statements within bpel flow, it must be having direct mapping of some element from source but your sample input xml might not be having that element and hence resulting in error. Try iterative debugging by adding more elements in input xml.
Regards,
Ankit -
Unable to create a whole root zone
Hi Folks,
I wanted to create a whole-root zone. I am unable to create one :(. Did some one encounter this problem ?.
BTW: I have SC 3.2 installed on this two node cluster. I was able to validate our Data services on this setup without any problem Now I am trying to experiment with zones, by creating zones. I am unable to move further with my validation of our data services on zones.
*) mkdir -m 700 /export/zone-1
*) The version of the OS used
# cat /etc/release
Solaris 10 11/06 s10s_u3wos_09 SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 01 November 2006
# zonecfg -z zone-1
zone-1: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zone-1> create
zonecfg:zone-1> remove inherit-pkg-dir dir=/sbin
zonecfg:zone-1> remove inherit-pkg-dir dir=/usr
zonecfg:zone-1> remove inherit-pkg-dir dir=/platform
zonecfg:zone-1> remove inherit-pkg-dir dir=/lib
zonecfg:zone-1> set autoboot=true
zonecfg:zone-1> set zonepath=/export/zone-1
zonecfg:zone-1> add net
zonecfg:zone-1:net> set address=192.18.75.237
zonecfg:zone-1:net> set physical=eri0
zonecfg:zone-1:net> end
zonecfg:zone-1> info
zonename: zone-1
zonepath: /export/zone-1
autoboot: true
pool:
limitpriv:
net:
address: 192.18.75.237
physical: eri0
zonecfg:zone-1> verify
zonecfg:zone-1> commit
zonecfg:zone-1> exit
# cat /etc/zones/zone-1.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE zone PUBLIC "-//Sun Microsystems Inc//DTD Zones//EN" "file:///usr/share/lib/xml/dtd/zonecfg.dtd.1">
<!--
DO NOT EDIT THIS FILE. Use zonecfg(1M) instead.
-->
<zone name="zone-1" zonepath="/export/zone-1" autoboot="true">
<network address="192.18.75.237" physical="eri0"/>
</zone>
# zoneadm list -civ
ID NAME STATUS PATH
0 global running /
- zone-1 configured /export/zone-1
# zoneadm -z zone-1 verify
# zoneadm -z zone-1 install
Preparing to install zone <zone-1>.
Creating list of files to copy from the global zone.
Copying <6080> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1071> packages on the zone.
Initialized <1071> packages on zone.
Zone <zone-1> is initialized.
Installation of these packages generated errors: <SUNWsczr SUNWdtlog SUNWsmmgr>
Installation of <1> packages was skipped.
Installation of these packages generated warnings: <SUNWcsr SUNWxwplr SUNWfontconfig-root SUNWpcr SUNWdtdmr SUNWtnamr SUNWkrbr SUNWtnetr SUNWdoc SUNWppror SUNWocfr SUNWvolr SUNWnfscr SUNWwbcor SUNWwebminr SUNWgssc SUNWnisr SUNWypr SUNWipplr SUNWaccr SUNWbsr SUNWdhcsr SUNWatfsr SUNWkdcr SUNWapch2r SUNWbindr SUNWbnur SUNWcnsr SUNWpsr SUNWsacom SUNWnfssr SUNWntpr SUNWftpr SUNWrcapr SUNWrcmdr SUNWslpr SUNWsndmr SUNWsshdr SUNWstsfr SUNWswupclr>
The file </export/zone-1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
# pkginfo -i SUNWsczr
application SUNWsczr Sun Cluster (non-global zones support)
# pkginfo -i SUNWsczr
application SUNWsczr Sun Cluster (non-global zones support)
# pkginfo -i SUNWdtlog
system SUNWdtlog System boot for Desktop Login
# pkginfo -i SUNWsmmgr
system SUNWsmmgr System Management Agent Startup scripts
*** package <SUNWsczr> failed to install with fatal errors:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/stoprgm> failed
pathname does not exist
NOTE: When the package <SUNWsczr> was installed in the global zone, the file <etc/init.d/stoprgm> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone <zone-1> in the file </export/zone-1/root/etc/init.d/stoprgm>.
ERROR : i.manifest cannot find archived files in /var/sadm/pkg/SUNWsczr/save/pspool/SUNWsczr/archive.
pkgadd: ERROR: class action script did not complete successfully
Installation of <SUNWsczr> on zone <zone-1> failed.
*** package <SUNWnisr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/nsswitch.nis> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <etc/nsswitch.nis> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/nsswitch.nis>.
WARNING: attribute verification of </export/zone-1/root/etc/nsswitch.nisplus> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <etc/nsswitch.nisplus> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/nsswitch.nisplus>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/nisplus> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <lib/svc/method/nisplus> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/nisplus>.
WARNING: attribute verification of </export/zone-1/root/var/nis/NIS+LDAPmapping.template> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <var/nis/NIS+LDAPmapping.template> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/nis/NIS+LDAPmapping.template>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ nis/client.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ rpc/nisplus.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ rpc/rex.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/client.xml> failed
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/client.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/nisplus.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rex.xml> failed
pathname does not exist
Installation of <SUNWnisr> on zone <zone-1> partially
failed.
*** package <SUNWypr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/var/yp/updaters> failed
pathname does not exist
NOTE: When the package <SUNWypr> was installed in the global zone,
the file <var/yp/updaters> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/yp/updaters>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/passwd.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/server.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/update.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/xfr.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/passwd.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/server.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/update.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/xfr.xml> failed
pathname does not exist
Installation of <SUNWypr> on zone <zone-1> partially
failed.
*** package <SUNWipplr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWipplr/save/pspool/SUNWipplr/reloc/var/svc/manifest/applic ation/print/ipp-listener.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/print/ipp-listener.xml> failed
pathname does not exist
Installation of <SUNWipplr> on zone <zone-1> partially
failed.
*** package <SUNWaccr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-sar> failed
pathname does not exist
NOTE: When the package <SUNWaccr> was installed in the global zone,
the file <lib/svc/method/svc-sar> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-sar>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWaccr/save/pspool/SUNWaccr/reloc/var/svc/manifest/system/s ar.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/sar.xml> failed
pathname does not exist
Installation of <SUNWaccr> on zone <zone-1> partially
failed.
*** package <SUNWbsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/rpld.conf> failed
pathname does not exist
NOTE: When the package <SUNWbsr> was installed in the global zone,
the file <etc/rpld.conf> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/rpld.conf>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbsr/save/pspool/SUNWbsr/reloc/var/svc/manifest/network/ra rp.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbsr/save/pspool/SUNWbsr/reloc/var/svc/manifest/network/rp c/bootparams.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rarp.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/bootparams.xml> failed
pathname does not exist
Installation of <SUNWbsr> on zone <zone-1> partially
failed.
*** package <SUNWdhcsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/dhcp> failed
pathname does not exist
NOTE: When the package <SUNWdhcsr> was installed in the global zone,
the file <etc/init.d/dhcp> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/init.d/dhcp>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWdhcsr/save/pspool/SUNWdhcsr/reloc/var/svc/manifest/networ k/dhcp-server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/dhcp-server.xml> failed
pathname does not exist
Installation of <SUNWdhcsr> on zone <zone-1> partially
failed.
*** package <SUNWatfsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-autofs> failed
pathname does not exist
NOTE: When the package <SUNWatfsr> was installed in the global zone,
the file <lib/svc/method/svc-autofs> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-autofs>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWatfsr/save/pspool/SUNWatfsr/reloc/var/svc/manifest/system /filesystem/autofs.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/filesystem/autofs.xml> failed
pathname does not exist
Installation of <SUNWatfsr> on zone <zone-1> partially
failed.
*** package <SUNWkdcr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWkdcr/save/pspool/SUNWkdcr/reloc/var/svc/manifest/network/ security/krb5_prop.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/security/krb5_prop.xml> failed
pathname does not exist
Installation of <SUNWkdcr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/var/apache2/icons/world2.gif> failed
pathname does not exist
NOTE: When the package <SUNWapch2r> was installed in the global zone,
the file <var/apache2/icons/world2.gif> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/apache2/icons/world2.gif>.
WARNING: attribute verification of </export/zone-1/root/var/apache2/icons/world2.png> failed
pathname does not exist
NOTE: When the package <SUNWapch2r> was installed in the global zone,
the file <var/apache2/icons/world2.png> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/apache2/icons/world2.png>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWapch2r/save/pspool/SUNWapch2r/reloc/var/svc/manifest/netw ork/http-apache2.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/http-apache2.xml> failed
pathname does not exist
Installation of <SUNWapch2r> on zone <zone-1> partially
failed.
*** package <SUNWbindr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbindr/save/pspool/SUNWbindr/reloc/var/svc/manifest/networ k/dns/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/dns/server.xml> failed
pathname does not exist
Installation of <SUNWbindr> on zone <zone-1> partially
failed.
*** package <SUNWbnur> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbnur/save/pspool/SUNWbnur/reloc/var/svc/manifest/network/ uucp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/uucp.xml> failed
pathname does not exist
Installation of <SUNWbnur> on zone <zone-1> partially
failed.
*** package <SUNWcnsr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ chargen.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ daytime.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ discard.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ echo.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ time.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/chargen.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/daytime.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/discard.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/echo.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/time.xml> failed
pathname does not exist
Installation of <SUNWcnsr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/etc/lp/fd/pr.fd> failed
pathname does not exist
NOTE: When the package <SUNWpsr> was installed in the global zone,
the file <etc/lp/fd/pr.fd> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/lp/fd/pr.fd>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/print-svc> failed
pathname does not exist
NOTE: When the package <SUNWpsr> was installed in the global zone,
the file <lib/svc/method/print-svc> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/print-svc>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWpsr/save/pspool/SUNWpsr/reloc/var/svc/manifest/applicatio n/print/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/print/server.xml> failed
pathname does not exist
Installation of <SUNWpsr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/var/snmp/mib/sun.mib> failed
pathname does not exist
NOTE: When the package <SUNWsacom> was installed in the global zone,
the file <var/snmp/mib/sun.mib> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/snmp/mib/sun.mib>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/etc/init.d/init.dmi> is corrupt
file size <373> expected <1125> actual
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/etc/init.d/init.snmpdx& gt; is corrupt
file size <382> expected <685> actual
ERROR: attribute verification of </export/zone-1/root/etc/init.d/init.dmi> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/etc/init.d/init.snmpdx> failed
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/var/svc/manifest/applic ation/management/dmi.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/var/svc/manifest/applic ation/management/snmpdx.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/management/dmi.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/management/snmpdx.xml> failed
pathname does not exist
Installation of <SUNWsacom> on zone <zone-1> partially
failed.
*** package <SUNWdtlog> failed to install with fatal errors:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/dtlogin> failed
pathname does not exist
NOTE: When the package <SUNWdtlog> was installed in the global zone,
the file <etc/init.d/dtlogin> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/init.d/dtlogin>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-dtlogin> failed
pathname does not exist
NOTE: When the package <SUNWdtlog> was installed in the global zone,
the file <lib/svc/method/svc-dtlogin> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-dtlogin>.
ERROR : i.manifest cannot find archived files in /var/sadm/pkg/SUNWdtlog/save/pspool/SUNWdtlog/archive.
pkgadd: ERROR: class action script did not complete successfully
Installation of <SUNWdtlog> on zone <zone-1> failed.
*** package <SUNWnfssr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/nfs-server> failed
pathname does not exist
NOTE: When the package <SUNWnfssr> was installed in the global zone,
the file <lib/svc/method/nfs-server> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/nfs-server>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnfssr/save/pspool/SUNWnfssr/reloc/var/svc/manifest/networ k/nfs/rquota.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnfssr/save/pspool/SUNWnfssr/reloc/var/svc/manifest/networ k/nfs/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nfs/rquota.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nfs/server.xml> failed
pathname does not exist
Installation of <SUNWnfssr> on zone <zone-1> partially
failed.
*** package <SUNWntpr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/inet/ntp.server> failed
pathname does not exist
NOTE: When the package <SUNWntpr> was installed in the global zone,
the file <etc/inet/ntp.server> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/inet/ntp.server>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/xntp> failed
pathname does not exist
NOTE: When the package <SUNWntpr> was installed in the global zone,
the file <lib/svc/method/xntp> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/xntp>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWntpr/save/pspool/SUNWntpr/reloc/var/svc/manifest/network/ ntp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/ntp.xml> failed
pathname does not exist
Installation of <SUNWntpr> on zone <zone-1> partially
failed.
*** package <SUNWftpr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWftpr/save/pspool/SUNWftpr/reloc/var/svc/manifest/network/ ftp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/ftp.xml> failed
pathname does not exist
Installation of <SUNWftpr> on zone <zone-1> partially
failed.
*** package <SUNWrcapr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWrcapr/save/pspool/SUNWrcapr/reloc/var/svc/manifest/system /rcap.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/rcap.xml> failed
pathname does not exist
Installation of <SUNWrcapr> on zone <zone-1> partially
failed.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWrcmdr/save/pspool/SUNWrcmdr/reloc/var/svc/manifest/networ k/talk.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/comsat.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/finger.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/login.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rexec.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rstat.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rusers.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/spray.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/wall.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/shell.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/talk.xml> failed
pathname does not exist
Installation of <SUNWrcmdr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/etc/sma/snmp/snmpconf-data/snmptrapd-data/traphandle> ; failed
pathname does not exist
NOTE: When the package <SUNWsmmgr> was installed in the global zone,
the file <etc/sma/snmp/snmpconf-data/snmptrapd-data/traphandle> was also installed. AfHello,
I still get the errors.
# zonecfg -z zone-one
zone-one: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zone-one> create -b
zonecfg:zone-one> set autoboot=true
zonecfg:zone-one> set zonepath=/export/zone-one
zonecfg:zone-one> add net
zonecfg:zone-one:net> set physical=eri0
zonecfg:zone-one:net> set address=192.18.xx.xxx
zonecfg:zone-one:net> end
zonecfg:zone-one> verify
zonecfg:zone-one> commit
zonecfg:zone-one> exit
# zoneadm -z zone-one verify
# zoneadm -z zone-one install
Preparing to install zone <zone-one>.
Creating list of files to copy from the global zone.
Copying <6080> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1071> packages on the zone.
Initialized <1071> packages on zone.
Zone <zone-one> is initialized.
Installation of these packages generated errors: <SUNWsczr SUNWdtlog SUNWsmmgr>
Installation of <1> packages was skipped.
Installation of these packages generated warnings: <SUNWcsr SUNWxwplr SUNWfontconfig-root SUNWpcr SUNWdtdmr SUNWtnamr SUNWkrbr SUNWtnetr SUNWdoc SUNWppror SUNWocfr SUNWvolr SUNWnfscr SUNWwbcor SUNWwebminr SUNWgssc SUNWnisr SUNWypr SUNWipplr SUNWaccr SUNWbsr SUNWdhcsr SUNWatfsr SUNWkdcr SUNWapch2r SUNWbindr SUNWbnur SUNWcnsr SUNWpsr SUNWsacom SUNWnfssr SUNWntpr SUNWftpr SUNWrcapr SUNWrcmdr SUNWslpr SUNWsndmr SUNWsshdr SUNWstsfr SUNWswupclr>
The file </export/zone-1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
_DD -
Unable to create position hierarchy in organization model
I was unable to create position hierarchy in organizational hierarchy. I want to maintain position hierarchy within an organization. But SAP CRM is not allowing that. I was able to create organizational hierarchy. Please let me know, how can I maintain the position hierarchy within the same organization?
--hariHi hari,
it is only possible to have a hierarchy with two levels on position level. Therefore you create two positions below your organization (tx ppoma_crm). At one of these positions you set the flag "Head of own organizational unit" at the Basic data tab of the position (To see this, you need to display the Details of the positions at the bottom of the screen). Now you can assign a business partner (or more) to this position which is (are) the Head of this unit.
If you need a more complex hierarchy you have to use organizations to show this.
Hope it helps!
Kind regards
Christian
Maybe you are looking for
-
How can I share files between two users? or merge the user accounts
my laptop came home from the shop with two user accounts -never noticed that before - and some files are in one user account, some in another. I want to share them so I can just use one account. I just upgraded to Lion, so that may be an issue. Best
-
SQL 2012 Reporting Services Print Control... FIX?
I have an web site that uses ActiveX print control and when there is a SQL update it breaks the print control for all the end users and I have to walk around and enter my admin username/pass to fix this.I have tried a number of fixes such as:Batch sc
-
Text to speech keeps crashing on my brand new Mac Mini running 10.5.1 Console Says: 12/15/07 1:58:05 AM com.apple.launchd[79] ([0x0-0x26026].com.apple.speech.SpeechService[203]) Exited abnormally: Bus error
-
How to restrict grant connect through with Data Vault
I need to restrict the ability to grant proxy privileges in the database. This is the statement: alter user USER_A grant connect through USER_B; I tried creating this rule that looks at the sql text for %CONNECT THROUGH% in the statement and then add
-
Deploying against a JSP site using JSTL
I am reviewing Contribute for use at my company. Our current corp site is deployed in JSP and makes extensive use of the Java Standard Tag Library, especially for writing dynamic URLs to content such as images, pdf, and application download. Can Cont