Unable to Create Validations

I am in Data Manager in Record Mode. I am trying to create validations.
In the record detail area, I selected Validations tab. In the validations tab, I right click to select "Add Validation"
Immediately after that I got error message stating "Error Saving Validation" "Field not Found <0xFFAA1000> Version 7.1(7.1.04.131).
I am not sure what is the reason for this error.
Can any one share some tpis, Please.

Hi SudhaViz,
This problem will be solved after repair your repository from the MDM Console.
Please find similar thread with same issue:
Re: Error while create/change Validation/Assignment after upgrade to MDM 7.1
Also, please refer the solution of this SAP NOTE 1433625:
https://websmp130.sap-ag.de/sap/support/notes/1433625
Regards,
Mandeep Saini

Similar Messages

Urgent : Unable to create VALID Initial Context

Hello All,
I am trying to learn JNDI and am using file system service provider which is provided by the sun
I have created the setup directories, but it would not work if I set up those directories on the drive other than C.
The following lines work for C drive :
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.fscontext.RefFSContextFactory");
env.put(Context.PROVIDER_URL,
"file:/tmp/tutorial");
try {
// Create the initial context
Context ctx = new InitialContext(env);
// Get listing of context
NamingEnumeration list = ctx.list("awt");
// Go through each item in list
while (list.hasMore()) {
NameClassPair nc = (NameClassPair)list.next);
System.out.println(nc);
// Close the context when we're done
ctx.close();
} catch (NamingException e) {
System.out.println("List failed: " + e);
As you all might have guessed this is code from straight from JNDI tutorial. But How do I specify some directory on drives other than C.
Please help : I tried the follwing
env.put (Context.PROVIDER_URL,
NAME);
In place of NAME above I tried the following
"file:///I:\tmp\tutorial"
"I:\tmp\tutorial"
and other silly combinations
****** awt is a directory under "I:\tmp\tutorial"

I wish It would have been pretty ?
But damn it, it doesn't work
I gave something like this
env.put(Context.PROVIDER_URL, "file:///I:/tmp/tutorial");
and the error come like this
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/jndi/toolkit/chars/CharacterDecoder
at com.sun.jndi.fscontext.RefFSContextFactory.createContext(RefFSContextFactory.java:42)
at com.sun.jndi.fscontext.RefFSContextFactory.createContextAux(RefFSContextFactory.java:47)
at com.sun.jndi.fscontext.FSContextFactory.getInitialContext(FSContextFactory.java:49)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at List.main(List.java:53)
If you have any idea whats happening, I would really appreciate

Unable to create foreign key: InvalidArgument=Value of '0' is not valid for 'index'. Parameter name: index

I am running an SQL(CE) script to create a DB. All script commands succeed, but the DB get "broken" after creating the last costaint: after running the script, viewing table properties of Table2 and clicking on "Manage relations" gives the following error: Unable to create foreign key: InvalidArgument=Value of '0' is not valid for 'index'. Parameter name: index. Wondering what does that refer to...
Here it is the script. Please note that no error is thrown by running the following queries (even from code that passing the queries by hand, one-by-one to sql server management studio).
CREATE TABLE [table1] (
[id_rubrica] numeric(18,0) NOT NULL
, [id_campo] numeric(18,0) NOT NULL
, [nome] nvarchar(100) NOT NULL
GO
ALTER TABLE [table1] ADD PRIMARY KEY ([id_rubrica],[id_campo]);
GO
CREATE UNIQUE INDEX [UQ__m_campi] ON [table1] ([id_campo] Asc);
GO
CREATE TABLE [table2] (
[id_campo] numeric(18,0) NOT NULL
, [valore] nvarchar(4000) NOT NULL
GO
ALTER TABLE [table2] ADD PRIMARY KEY ([id_campo],[valore]);
GO
ALTER TABLE [table2] ADD CONSTRAINT [campo_valoriFissi] FOREIGN KEY ([id_campo]) REFERENCES [table1]([id_campo]);
GO
Sid (MCP - http://www.sugata.eu)

I know this is kind of old post, but did this realy solved your problem?
I'm getting this same error message after adding a FK constraint via UI on VS2008 Server Explorer.
I can add the constraint with no errors, but the constraint is not created on the DataSet wizard (strongly typed datasets on Win CE 6) and when I click "Manage Relations" on the "Table Properties" this error pop out:
"InvalidArgument=Value or '0' is not valid for 'index'.
Parameter name: index"
Even after vreating my table with the relation in SQL the same occurs:
CREATE TABLE pedidosRastreios (
    idPedidoRastreio INT NOT NULL IDENTITY PRIMARY KEY,
    idPedido INT NOT NULL CONSTRAINT FK_pedidosRastreios_pedidos REFERENCES pedidos(idPedido) ON DELETE CASCADE,
    codigo NVARCHAR(20) NOT NULL

Unable to create cluster, hangs on forming cluster

Hi all,
I am trying to create a 2 node cluster on two x64 Windows Server 2008 Enterprise edition servers. I am running the setup from the failover cluster MMC and it seems to run ok right up to the point where the snap-in says creating cluster. Then it seems to hang on "forming cluster" and a message pops up saying "The operation is taking longer than expected". A counter comes up and when it hits 2 minutes the wizard cancels and another message comes up "Unable to sucessfully cleanup".
The validation runs successfully before I start trying to create the cluster. The hardware involved is a HP EVA 6000, two Dell 2950's
I have included the report generated by the create cluster wizard below and the error from the event log on one of the machines (the error is the same on both machines).
Is there anything I can do to give me a better indication of what is happening, so I can resolve this issue or does anyone have any suggestions for me?
Thanks in advance.
Anthony
Create Cluster Log
==================
Beginning to configure the cluster <cluster>.
Initializing Cluster <cluster>.
Validating cluster state on node <Node1>
Searching the domain for computer object 'cluster'.
Creating a new computer object for 'cluster' in the domain.
Configuring computer object 'cluster' as cluster name object.
Validating installation of the Network FT Driver on node <Node1>
Validating installation of the Cluster Disk Driver on node <Node1>
Configuring Cluster Service on node <Node1>
Validating installation of the Network FT Driver on node <Node2>
Validating installation of the Cluster Disk Driver on node <Node2>
Configuring Cluster Service on node <Node2>
Waiting for notification that Cluster service on node <Node2>
Forming cluster '<cluster>'.
Unable to successfully cleanup.
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Event Log
=========
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          29/08/2008 19:43:14
Event ID:      1570
Task Category: None
Level:         Critical
Keywords:
User:          SYSTEM
Computer:      <NODE 2>
Description:
Node 'NODE2' failed to establish a communication session while joining the cluster. This was due to an authentication failure. Please verify that the nodes are running compatible versions of the cluster service software.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{baf908ea-3421-4ca9-9b84-6689b8c6f85f}" />
    <EventID>1570</EventID>
    <Version>0</Version>
    <Level>1</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2008-08-29T18:43:14.294Z" />
    <EventRecordID>4481</EventRecordID>
    <Correlation />
    <Execution ProcessID="2412" ThreadID="3416" />
    <Channel>System</Channel>
    <Computer>NODE2</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="NodeName">node2</Data>
</EventData>
</Event>
====
I have also since tried creating the cluster with the firewall and no success.
I have tried creating the node from the other cluster and this did not work either
I tried creating a cluster with just a single node and this did create a cluster. I could not join the other node and the network name resource did not come online either. The below is from the event logs.
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          01/09/2008 12:42:44
Event ID:      1207
Task Category: Network Name Resource
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Node1.Domain
Description:
Cluster network name resource 'Cluster Name' cannot be brought online. The computer object associated with the resource could not be updated in domain 'Domain' for the following reason:
Unable to obtain the Primary Cluster Name Identity token.
The text for the associated error code is: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
The cluster identity 'CLUSTER$' may lack permissions required to update the object. Please work with your domain administrator to ensure that the cluster identity can update computer objects in the domain.

I am having the exact same issue... but these are on freshly created virtual machines... no group policy or anything...
I am 100% unable to create a Virtual Windows server 2012 failover cluster using two virtual fiber channel adapters to connect to the shared storage.
I've tried using GUI and powershell, I've tried adding all available storage, or not adding it, I've tried renaming the server and changing all the IP addresses....
To reproduce:
1. Create two identical Server 2012 virtual machines
(My Config: 4 CPU's, 4gb-8gb dynamic memory, 40gb HDD, two network cards (one for private, one for mgmt), two fiber cards to connect one to each vsan.)
2. Update both VM's to current windows updates
3. Add Failover Clustering role, Reboot, and try to create cluster.
Cluster passed all validation tests perfectly, but then it gets to "forming cluster" and times out =/
Any assistance would be greatly appreciate.

Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

Oracle Database 11.2 Post-Upgrade error: ORA-01658: unable to create INITIA

Hi,
While upgrading of database 11.1.0 to 11.2.0, i am getting the below errors.
SQL> @$ORACLE_HOME/rdbms/admin/utlu112s.sql
Oracle Database 11.2 Post-Upgrade Status Tool 12-28-2011 23:26:45
Component Status Version HH:MM:SS
Oracle Server
. VALID 11.2.0.1.0 00:33:27
JServer JAVA Virtual Machine
. VALID 11.2.0.1.0 00:14:04
Oracle Real Application Clusters
. INVALID 11.2.0.1.0 00:00:01
OLAP Analytic Workspace
. VALID 11.2.0.1.0 00:00:40
OLAP Catalog
. VALID 11.2.0.1.0 00:02:00
Oracle OLAP API
. VALID 11.2.0.1.0 00:00:32
Oracle Label Security
. OPTION OFF 10.2.0.3.0 00:00:00
Oracle Enterprise Manager
. LOADING 00:00:00
Oracle XDK
. VALID 11.2.0.1.0 00:01:10
Oracle Text
. VALID 11.2.0.1.0 00:01:52
Oracle XML Database
. VALID 11.2.0.1.0 00:04:49
Oracle Database Java Packages
. VALID 11.2.0.1.0 00:00:28
Oracle Multimedia
. VALID 11.2.0.1.0 00:12:37
Spatial
. INVALID 11.2.0.1.0 00:09:51
Oracle Application Express
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-00942: table or view does not exist
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-00942: table or view does not exist
. ORA-00942: table or view does not exist
. ORA-00942: table or view does not exist
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-00942: table or view does not exist
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-00942: table or view does not exist
. ORA-00942: table or view does not exist
. ORA-00942: table or view does not exist
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-00942: table or view does not exist
. ORA-00942: table or view does not exist
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-00942: table or view does not exist
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
. INVALID 3.2.1.00.10 00:33:43
Gathering Statistics
. 00:44:43
Total Upgrade Time: 02:40:35
PL/SQL procedure successfully completed.
Please help me on this.
Thanks,

Vinod Ranjan wrote:
Hi sb92075,
Thanks for quick update,
So is this related error is related to HTMLDB tablespace ?yes
>
Is this solution will workout?It depends upon actual size of new datafile added.
So do as directed & report the results.
What is current size of HTMLDB datafiles?
>
+ Use ALTER TABLESPACE ADD DATAFILE to add additional space to the+
+ tablespace or retry with a smaller value for INITIAL +
Thanks,
Edited by: Vinod Ranjan on 31 Dec, 2011 7:43 AM

Unable to Create PLSQL Webservice in JDeveloper 11g

Hi,
i have created webservice for PL/SQL for functions with out TYPE data types as parameter..
but i am unable to create a webservice for procedure having
Freight_Pkg.PROCEDURE get_freight(
p_sbl_source_line_tab IN OUT SYK_SBL_SOURCE_LINE_TAB_TYPE
,l_total_freight OUT NUMBER
,l_err_code OUT NUMBER
,l_err_mesg OUT VARCHAR2
and when i try to create web service it generates below Warning
=========================================
Log Message of WebService
========================================
Generating PL/SQL Web Service
Generating WSDL and mapping file
WARNING: OWS-00077 The Value Type class: SykSblSourceLineBase does not have a valid Java Bean pattern.
Adding service files to deployment profile
Service generation finished
Generation complete.
Please let me know the procedure for creating Webservice for PLSQL of Table Type Parameters passing as IN parameter in Procedure.
Thanks,
Vijay

Vijay,
Is this configured with Oracle E-Business Suite? If yes, please note that JDeveloper 11g is not certified with Oracle Apps 11i/R12.
How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x [ID 416708.1]
Configuring JDeveloper For Use With Oracle Applications 11i and R12 [ID 330236.1]
If this is not related to EBS, post your question in the appropriate forum for a better/faster response.
JDeveloper and ADF
JDeveloper and ADF
Thanks,
Hussein

Unable to create the Profit center groups

Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
Rakesh

Hi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh

Unable to create a contact

Hi Preston,
I am trying to create a contact using createItemRequest method.
I am unable to create a contact when i try to set the EmailAddressList's Primary Attribute for the contact. However if i comment the line for setting the Primary Attribute for email addresses, I am able to create the contact.
The following is the XML Trace.
<createItemRequest xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
- + <item xsi:type="q1:Contact" xmlns:q1="http://schemas.novell.com/2005/01/GroupWise/types">
- + <q1:name>test user</q1:name>
- + <q1:container>4B94C4DE.DSRDOM.BNEPO.104.1737179.1. 87D.1@53</q1:container>
- + <q1:PABGuid>/Y\6` "f <E:*! 6~ !</q1:PABGuid>
- + <q1:fullName>
- + <q1:displayName>test user</q1:displayName>
- + <q1:firstName>test</q1:firstName>
- + <q1:lastName>user</q1:lastName>
</q1:fullName>
- + <q1:emailList primary="test1">
- + <q1:email>test1</q1:email>
- + <q1:email>test2</q1:email>
</q1:emailList>
<q1:officeInfo />
</item>
</createItemRequest>
I am getting two types of error
- + <createItemResponse
xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
- + <status>
- + <gwt:code>53506</gwt:code>
- + <gwt:description>User ambiguous</gwt:description>
</status>
</createItemResponse>
- + <createItemResponse
xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
- + <status>
- + <gwt:code>53505</gwt:code>
- + <gwt:description>User not on post office</gwt:description>
</status>
</createItemResponse>

The code is looking for internet style addresses.
Do you get the same problem if you supply email
address with an internet domain, i.e. [email protected]?
(Where "test.com" is a valid internet domain.)
>>> On Monday, April 12, 2010 at 11:56 PM,
shwetajain<[email protected]> wrote:
> Hi Preston,
>
> I am trying to create a contact using createItemRequest method.
> I am unable to create a contact when i try to set the
> EmailAddressList's Primary Attribute for the contact. However if i
> comment the line for setting the Primary Attribute for email addresses,
> I am able to create the contact.
>
> The following is the XML Trace.
>
> <createItemRequest
> xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
> ‑ + <item xsi:type="q1:Contact"
> xmlns:q1="http://schemas.novell.com/2005/01/GroupWise/types">
> ‑ + <q1:name>test user</q1:name>
> ‑ +
> <q1:container>4B94C4DE.DSRDOM.BNEPO.104.1737179.1. 87D.1@53</q1:container>
> ‑ + <q1:PABGuid>/Y\6` "f <E:*! 6~ !</q1:PABGuid>
> ‑ + <q1:fullName>
> ‑ + <q1:displayName>test user</q1:displayName>
> ‑ + <q1:firstName>test</q1:firstName>
> ‑ + <q1:lastName>user</q1:lastName>
> </q1:fullName>
> ‑ + <q1:emailList primary="test1">
> ‑ + <q1:email>test1</q1:email>
> ‑ + <q1:email>test2</q1:email>
> </q1:emailList>
> <q1:officeInfo />
> </item>
> </createItemRequest>
>
> I am getting two types of error
>
>
> ‑ + <createItemResponse
>
> xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
> xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
> ‑ + <status>
> ‑ + <gwt:code>53506</gwt:code>
> ‑ + <gwt:description>User ambiguous</gwt:description>
> </status>
> </createItemResponse>
>
>
> ‑ + <createItemResponse
>
> xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
> xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
> ‑ + <status>
> ‑ + <gwt:code>53505</gwt:code>
> ‑ + <gwt:description>User not on post
> office</gwt:description>
> </status>
> </createItemResponse>

Unable to create xml from xml schema

JDeveloper 10.1.3 EA1
I am unable to create a new xml file from an xml schema when the starting root element is a complex type (but it works with a simple type). It does not matter if the xml schema is registered within JDeveloper.
Is this a bug or intended behaviour?
Error message:
''XML Document from XML Schema creation could not be competed succesfully. Make sure the source schema is valid and that you have write permissions to the output directory."
NB The xml schema is valid and I have write permissions on the specified directory.

When I do not register this (or other) schema with JDeveloper, I can create an xml document from xml schema. However, when I register this schema and then try to generate an xml document (either from the registered xsd either from a filesystem xsd) with person as starting node it fails with the mentioned error. However, when I use city as starting node it is generated successfully.
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.amis.nl/demo/hrm"
targetNamespace="http://www.amis.nl/demo/hrm"
elementFormDefault="qualified">
<xsd:element name="person">
<xsd:annotation>
<xsd:documentation>
A sample complex element
</xsd:documentation>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" type="xsd:string"/>
<xsd:element name="length" type="xsd:int"/>
<xsd:element name="weight" type="xsd:int" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="city" type="xsd:string">
<xsd:annotation>
<xsd:documentation>
A sample simple element.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:schema>

With WBS element unable to create the Shopping cart

Hi,
With WBS element unable to create the Shopping cart
Problem description:
Shiopping cart >Item detail > Account assignment
A/c assignment category " WBS element", Assignment no (some no,eg 1000-2 ).System picks the G/L account and business area,unable to create the shopping cart.Getting error message that
"The account assignment objects are defined for different business areas "
Did i missed anything ,please
Thanks
Hareesha

Hi Hareesha,
As Sreedhar has rightly said the issue is definitely with the correctness of the data.
Check the assignment of WBS to the proper business area which you are using to create the shopping cart.Check your org. structure and attributes and their assignments once again.
Neverthless some OSS notes for your reference if in case you can not able to make P.Os or the SC's / P.Os are not getting transfered to back end R/3.
<b>Note 727897 - WBS element conversion in extended classic scenario</b>
<b>Note 1000184 - Account assignment error when document transfer to back end</b>
Even after validating the data if the problem still persists please explain it clearly with the errors for further help.
Rgds,
Teja

Unable to create a whole root zone

Hi Folks,
I wanted to create a whole-root zone. I am unable to create one :(. Did some one encounter this problem ?.
BTW: I have SC 3.2 installed on this two node cluster. I was able to validate our Data services on this setup without any problem Now I am trying to experiment with zones, by creating zones. I am unable to move further with my validation of our data services on zones.
*) mkdir -m 700 /export/zone-1
*) The version of the OS used
# cat /etc/release
Solaris 10 11/06 s10s_u3wos_09 SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 01 November 2006
# zonecfg -z zone-1
zone-1: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zone-1> create
zonecfg:zone-1> remove inherit-pkg-dir dir=/sbin
zonecfg:zone-1> remove inherit-pkg-dir dir=/usr
zonecfg:zone-1> remove inherit-pkg-dir dir=/platform
zonecfg:zone-1> remove inherit-pkg-dir dir=/lib
zonecfg:zone-1> set autoboot=true
zonecfg:zone-1> set zonepath=/export/zone-1
zonecfg:zone-1> add net
zonecfg:zone-1:net> set address=192.18.75.237
zonecfg:zone-1:net> set physical=eri0
zonecfg:zone-1:net> end
zonecfg:zone-1> info
zonename: zone-1
zonepath: /export/zone-1
autoboot: true
pool:
limitpriv:
net:
address: 192.18.75.237
physical: eri0
zonecfg:zone-1> verify
zonecfg:zone-1> commit
zonecfg:zone-1> exit
# cat /etc/zones/zone-1.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE zone PUBLIC "-//Sun Microsystems Inc//DTD Zones//EN" "file:///usr/share/lib/xml/dtd/zonecfg.dtd.1">

<zone name="zone-1" zonepath="/export/zone-1" autoboot="true">
<network address="192.18.75.237" physical="eri0"/>
</zone>
# zoneadm list -civ
ID NAME STATUS PATH
0 global running /
- zone-1 configured /export/zone-1
# zoneadm -z zone-1 verify
# zoneadm -z zone-1 install
Preparing to install zone <zone-1>.
Creating list of files to copy from the global zone.
Copying <6080> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1071> packages on the zone.
Initialized <1071> packages on zone.
Zone <zone-1> is initialized.
Installation of these packages generated errors: <SUNWsczr SUNWdtlog SUNWsmmgr>
Installation of <1> packages was skipped.
Installation of these packages generated warnings: <SUNWcsr SUNWxwplr SUNWfontconfig-root SUNWpcr SUNWdtdmr SUNWtnamr SUNWkrbr SUNWtnetr SUNWdoc SUNWppror SUNWocfr SUNWvolr SUNWnfscr SUNWwbcor SUNWwebminr SUNWgssc SUNWnisr SUNWypr SUNWipplr SUNWaccr SUNWbsr SUNWdhcsr SUNWatfsr SUNWkdcr SUNWapch2r SUNWbindr SUNWbnur SUNWcnsr SUNWpsr SUNWsacom SUNWnfssr SUNWntpr SUNWftpr SUNWrcapr SUNWrcmdr SUNWslpr SUNWsndmr SUNWsshdr SUNWstsfr SUNWswupclr>
The file </export/zone-1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
# pkginfo -i SUNWsczr
application SUNWsczr Sun Cluster (non-global zones support)
# pkginfo -i SUNWsczr
application SUNWsczr Sun Cluster (non-global zones support)
# pkginfo -i SUNWdtlog
system SUNWdtlog System boot for Desktop Login
# pkginfo -i SUNWsmmgr
system SUNWsmmgr System Management Agent Startup scripts
*** package <SUNWsczr> failed to install with fatal errors:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/stoprgm> failed
pathname does not exist
NOTE: When the package <SUNWsczr> was installed in the global zone, the file <etc/init.d/stoprgm> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone <zone-1> in the file </export/zone-1/root/etc/init.d/stoprgm>.
ERROR : i.manifest cannot find archived files in /var/sadm/pkg/SUNWsczr/save/pspool/SUNWsczr/archive.
pkgadd: ERROR: class action script did not complete successfully
Installation of <SUNWsczr> on zone <zone-1> failed.
*** package <SUNWnisr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/nsswitch.nis> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <etc/nsswitch.nis> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/nsswitch.nis>.
WARNING: attribute verification of </export/zone-1/root/etc/nsswitch.nisplus> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <etc/nsswitch.nisplus> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/nsswitch.nisplus>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/nisplus> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <lib/svc/method/nisplus> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/nisplus>.
WARNING: attribute verification of </export/zone-1/root/var/nis/NIS+LDAPmapping.template> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <var/nis/NIS+LDAPmapping.template> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/nis/NIS+LDAPmapping.template>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ nis/client.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ rpc/nisplus.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ rpc/rex.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/client.xml> failed
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/client.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/nisplus.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rex.xml> failed
pathname does not exist
Installation of <SUNWnisr> on zone <zone-1> partially
failed.
*** package <SUNWypr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/var/yp/updaters> failed
pathname does not exist
NOTE: When the package <SUNWypr> was installed in the global zone,
the file <var/yp/updaters> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/yp/updaters>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/passwd.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/server.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/update.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/xfr.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/passwd.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/server.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/update.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/xfr.xml> failed
pathname does not exist
Installation of <SUNWypr> on zone <zone-1> partially
failed.
*** package <SUNWipplr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWipplr/save/pspool/SUNWipplr/reloc/var/svc/manifest/applic ation/print/ipp-listener.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/print/ipp-listener.xml> failed
pathname does not exist
Installation of <SUNWipplr> on zone <zone-1> partially
failed.
*** package <SUNWaccr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-sar> failed
pathname does not exist
NOTE: When the package <SUNWaccr> was installed in the global zone,
the file <lib/svc/method/svc-sar> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-sar>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWaccr/save/pspool/SUNWaccr/reloc/var/svc/manifest/system/s ar.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/sar.xml> failed
pathname does not exist
Installation of <SUNWaccr> on zone <zone-1> partially
failed.
*** package <SUNWbsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/rpld.conf> failed
pathname does not exist
NOTE: When the package <SUNWbsr> was installed in the global zone,
the file <etc/rpld.conf> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/rpld.conf>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbsr/save/pspool/SUNWbsr/reloc/var/svc/manifest/network/ra rp.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbsr/save/pspool/SUNWbsr/reloc/var/svc/manifest/network/rp c/bootparams.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rarp.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/bootparams.xml> failed
pathname does not exist
Installation of <SUNWbsr> on zone <zone-1> partially
failed.
*** package <SUNWdhcsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/dhcp> failed
pathname does not exist
NOTE: When the package <SUNWdhcsr> was installed in the global zone,
the file <etc/init.d/dhcp> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/init.d/dhcp>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWdhcsr/save/pspool/SUNWdhcsr/reloc/var/svc/manifest/networ k/dhcp-server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/dhcp-server.xml> failed
pathname does not exist
Installation of <SUNWdhcsr> on zone <zone-1> partially
failed.
*** package <SUNWatfsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-autofs> failed
pathname does not exist
NOTE: When the package <SUNWatfsr> was installed in the global zone,
the file <lib/svc/method/svc-autofs> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-autofs>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWatfsr/save/pspool/SUNWatfsr/reloc/var/svc/manifest/system /filesystem/autofs.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/filesystem/autofs.xml> failed
pathname does not exist
Installation of <SUNWatfsr> on zone <zone-1> partially
failed.
*** package <SUNWkdcr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWkdcr/save/pspool/SUNWkdcr/reloc/var/svc/manifest/network/ security/krb5_prop.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/security/krb5_prop.xml> failed
pathname does not exist
Installation of <SUNWkdcr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/var/apache2/icons/world2.gif> failed
pathname does not exist
NOTE: When the package <SUNWapch2r> was installed in the global zone,
the file <var/apache2/icons/world2.gif> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/apache2/icons/world2.gif>.
WARNING: attribute verification of </export/zone-1/root/var/apache2/icons/world2.png> failed
pathname does not exist
NOTE: When the package <SUNWapch2r> was installed in the global zone,
the file <var/apache2/icons/world2.png> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/apache2/icons/world2.png>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWapch2r/save/pspool/SUNWapch2r/reloc/var/svc/manifest/netw ork/http-apache2.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/http-apache2.xml> failed
pathname does not exist
Installation of <SUNWapch2r> on zone <zone-1> partially
failed.
*** package <SUNWbindr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbindr/save/pspool/SUNWbindr/reloc/var/svc/manifest/networ k/dns/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/dns/server.xml> failed
pathname does not exist
Installation of <SUNWbindr> on zone <zone-1> partially
failed.
*** package <SUNWbnur> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbnur/save/pspool/SUNWbnur/reloc/var/svc/manifest/network/ uucp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/uucp.xml> failed
pathname does not exist
Installation of <SUNWbnur> on zone <zone-1> partially
failed.
*** package <SUNWcnsr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ chargen.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ daytime.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ discard.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ echo.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ time.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/chargen.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/daytime.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/discard.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/echo.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/time.xml> failed
pathname does not exist
Installation of <SUNWcnsr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/etc/lp/fd/pr.fd> failed
pathname does not exist
NOTE: When the package <SUNWpsr> was installed in the global zone,
the file <etc/lp/fd/pr.fd> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/lp/fd/pr.fd>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/print-svc> failed
pathname does not exist
NOTE: When the package <SUNWpsr> was installed in the global zone,
the file <lib/svc/method/print-svc> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/print-svc>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWpsr/save/pspool/SUNWpsr/reloc/var/svc/manifest/applicatio n/print/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/print/server.xml> failed
pathname does not exist
Installation of <SUNWpsr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/var/snmp/mib/sun.mib> failed
pathname does not exist
NOTE: When the package <SUNWsacom> was installed in the global zone,
the file <var/snmp/mib/sun.mib> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/snmp/mib/sun.mib>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/etc/init.d/init.dmi> is corrupt
file size <373> expected <1125> actual
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/etc/init.d/init.snmpdx& gt; is corrupt
file size <382> expected <685> actual
ERROR: attribute verification of </export/zone-1/root/etc/init.d/init.dmi> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/etc/init.d/init.snmpdx> failed
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/var/svc/manifest/applic ation/management/dmi.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/var/svc/manifest/applic ation/management/snmpdx.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/management/dmi.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/management/snmpdx.xml> failed
pathname does not exist
Installation of <SUNWsacom> on zone <zone-1> partially
failed.
*** package <SUNWdtlog> failed to install with fatal errors:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/dtlogin> failed
pathname does not exist
NOTE: When the package <SUNWdtlog> was installed in the global zone,
the file <etc/init.d/dtlogin> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/init.d/dtlogin>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-dtlogin> failed
pathname does not exist
NOTE: When the package <SUNWdtlog> was installed in the global zone,
the file <lib/svc/method/svc-dtlogin> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-dtlogin>.
ERROR : i.manifest cannot find archived files in /var/sadm/pkg/SUNWdtlog/save/pspool/SUNWdtlog/archive.
pkgadd: ERROR: class action script did not complete successfully
Installation of <SUNWdtlog> on zone <zone-1> failed.
*** package <SUNWnfssr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/nfs-server> failed
pathname does not exist
NOTE: When the package <SUNWnfssr> was installed in the global zone,
the file <lib/svc/method/nfs-server> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/nfs-server>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnfssr/save/pspool/SUNWnfssr/reloc/var/svc/manifest/networ k/nfs/rquota.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnfssr/save/pspool/SUNWnfssr/reloc/var/svc/manifest/networ k/nfs/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nfs/rquota.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nfs/server.xml> failed
pathname does not exist
Installation of <SUNWnfssr> on zone <zone-1> partially
failed.
*** package <SUNWntpr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/inet/ntp.server> failed
pathname does not exist
NOTE: When the package <SUNWntpr> was installed in the global zone,
the file <etc/inet/ntp.server> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/inet/ntp.server>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/xntp> failed
pathname does not exist
NOTE: When the package <SUNWntpr> was installed in the global zone,
the file <lib/svc/method/xntp> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/xntp>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWntpr/save/pspool/SUNWntpr/reloc/var/svc/manifest/network/ ntp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/ntp.xml> failed
pathname does not exist
Installation of <SUNWntpr> on zone <zone-1> partially
failed.
*** package <SUNWftpr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWftpr/save/pspool/SUNWftpr/reloc/var/svc/manifest/network/ ftp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/ftp.xml> failed
pathname does not exist
Installation of <SUNWftpr> on zone <zone-1> partially
failed.
*** package <SUNWrcapr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWrcapr/save/pspool/SUNWrcapr/reloc/var/svc/manifest/system /rcap.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/rcap.xml> failed
pathname does not exist
Installation of <SUNWrcapr> on zone <zone-1> partially
failed.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWrcmdr/save/pspool/SUNWrcmdr/reloc/var/svc/manifest/networ k/talk.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/comsat.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/finger.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/login.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rexec.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rstat.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rusers.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/spray.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/wall.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/shell.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/talk.xml> failed
pathname does not exist
Installation of <SUNWrcmdr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/etc/sma/snmp/snmpconf-data/snmptrapd-data/traphandle> ; failed
pathname does not exist
NOTE: When the package <SUNWsmmgr> was installed in the global zone,
the file <etc/sma/snmp/snmpconf-data/snmptrapd-data/traphandle> was also installed. Af

Hello,
I still get the errors.
# zonecfg -z zone-one
zone-one: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zone-one> create -b
zonecfg:zone-one> set autoboot=true
zonecfg:zone-one> set zonepath=/export/zone-one
zonecfg:zone-one> add net
zonecfg:zone-one:net> set physical=eri0
zonecfg:zone-one:net> set address=192.18.xx.xxx
zonecfg:zone-one:net> end
zonecfg:zone-one> verify
zonecfg:zone-one> commit
zonecfg:zone-one> exit
# zoneadm -z zone-one verify
# zoneadm -z zone-one install
Preparing to install zone <zone-one>.
Creating list of files to copy from the global zone.
Copying <6080> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1071> packages on the zone.
Initialized <1071> packages on zone.
Zone <zone-one> is initialized.
Installation of these packages generated errors: <SUNWsczr SUNWdtlog SUNWsmmgr>
Installation of <1> packages was skipped.
Installation of these packages generated warnings: <SUNWcsr SUNWxwplr SUNWfontconfig-root SUNWpcr SUNWdtdmr SUNWtnamr SUNWkrbr SUNWtnetr SUNWdoc SUNWppror SUNWocfr SUNWvolr SUNWnfscr SUNWwbcor SUNWwebminr SUNWgssc SUNWnisr SUNWypr SUNWipplr SUNWaccr SUNWbsr SUNWdhcsr SUNWatfsr SUNWkdcr SUNWapch2r SUNWbindr SUNWbnur SUNWcnsr SUNWpsr SUNWsacom SUNWnfssr SUNWntpr SUNWftpr SUNWrcapr SUNWrcmdr SUNWslpr SUNWsndmr SUNWsshdr SUNWstsfr SUNWswupclr>
The file </export/zone-1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
_DD

Could not create validator

All of a sudden I am unable to create a record with a JSF page, the error I am seeing in the console is the following:
WARNING: could not create validator for validatorId:null and binding:#{bindings.KenmerkRegister.validator}
Jun 5, 2007 2:22:09 PM oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
SEVERE: attribute 'validatorId' is missing
(and so on)
What does this mean? I cannot find it anywhere.....

frank ,i meet the error too . there are three .
1.can not create validator
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sQuoteId.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sBrokerId.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sCustomerId.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sQuoteDateStart.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sQuoteDateEnd.validator}
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag createValidator
严重: attribute 'validatorId' is missing
2007-6-16 15:29:37 oracle.adfinternal.view.faces.taglib.ValidatorTag doStartTag
警告: could not create validator for validatorId:null and binding:#{bindings.sStatus.validator}
2007-6-16 15:29:37
2.can not init af:selectOneChoice
oracle.adfinternal.view.faces.renderkit.core.xhtml.SimpleSelectOneRenderer _getSelectedIndex
警告: Could not find selected item matching value "-1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id15]
3.and when i click a commandButton to invoke an action , occur the following error,
51079 [HTTPThreadGroup-5] ERROR lifecycle.InvokeApplicationPhase - execute: oracle.jbo.uicli.jui.JUActionBinding.execute(javax.faces.event.ActionEvent)
javax.faces.el.MethodNotFoundException: execute: oracle.jbo.uicli.jui.JUActionBinding.execute(javax.faces.event.ActionEvent)
     at com.sun.faces.el.MethodBindingImpl.method(MethodBindingImpl.java:226)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:144)
     at oracle.adf.view.faces.component.UIXComponentBase.__broadcast(UIXComponentBase.java:1087)
     at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:204)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
     at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Unable to create DTP

HI
I am trying to create DTP for a master data infobject, before i do any change,
i m getting a message "Enter a valid value" and am unable to proceed further
plz help
Regards

U have to apply following SAP note.
Note 1171462 - Error while maintaining DTP for Master Data Update
Summary
Symptom
You are unable to create/maintain a Data Transfer Process(DTP) which loads Master Data into a Characteristic. While maintaining the DTP, you encounter an error message - 'Enter a valid Value' (00 002) and you are unable to navigate out from the 'Update' tab of the DTP.

Unable to create communication channel - RFC

Hi ,
I am trying to create communication channel automatically , when adding business systems from SLD to integration repository. I get the following error only for RFC
all other communication channel gets generated correctly.. Is there any thing i am missing.
HTTP communication channel GeneratedReceiverChannel_HTTP created
IDoc communication channel GeneratedReceiverChannel_IDoc created
XI communication channel GeneratedReceiverChannel_XI created
Unable to create communication channel: Unable to generate the communication channel (NWR_107, GeneratedReceiverChannel_RFC): com.sap.aii.utilxi.misc.api.ClientServerException
Thanks,
Ganesh Ram

Please run transaction SLDCHECK. The connection to SLD might not be working properly.
Plus, in the business system you created, check if client number and all other parameters associated with SAP systems are valid.
Dmitriy

Unable to Create Validations

Similar Messages

Maybe you are looking for