Unable to create VM template
Hi Folks,
I am trying to create a VM template from an existing VM on the host machine. I keep getting an error (2903) VMM could not locate the file/folder \\...\VMMLibrary\..\VMxyz.vhdx on the abc server. The system cannot find
the specified file.
The VM was created in Hyper-V on server 2012 R2 and is a generate 1 VM using a VHD (its just a simple VM with 4gb memory and a 60GB disk). I'm not sure why there is a reference to a VHDX.
Its SCVMM 2012 R2.
Does anyone have an idea what the real issue might be?
Regards
Andy
Output of Adminserver.log :
####<Mar 23, 2015 12:57:57 PM PDT> <Info> <Common> <rac11gr2.example.com> <AdminServer> <Odof Tcp Client Thread: /127.0.0.1:54321/541> <<anonymous>> <> <0000Kl80bpq3n3WjLxZR8A1L46BN000002> <1427140677283> <WL-000628> <Created "1" resources for pool "OVMDS", out of which "1" are available and "0" are unavailable.>
####<Mar 23, 2015 12:58:05 PM PDT> <Info> <Health> <rac11gr2.example.com> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <9e364e94b90406d2:33c960d3:14c48021b6b:-8000-000000000000000c> <1427140685606> <WL-310002> <48% of the total memory in the server is free>
Hmmm.... Not much info there methinks
Hi Michal.
In answer to your q's :
- Do your servers have "Utility" role checked? Where can I check this. I'm new to the world of OVM tmanagers, servers and templates so very much a learning curve for me here.
- What kind of repository you are using (nfs, ocfs, local)?: - NFS
- Is your repository presented to these servers? Yep
Similar Messages
-
Outlook Integration: unable to create snapshot templates.
Dear all,
I followed all the steps mentioned in note 861055
"You can easily repeat the step of template creation after running the server installation:
1. Start the Addon Outlook Integration from Business one.
2. Choose/Administration/Outlook Integration/Define Snapshot Templates
3. Select "Create Default Templates" from the "Goto" menu. This will repeat the procedure that could not be started because of the missing layout files."
But when I choose "Create Default Templates" nothing happens...
I'm using SBO 2005A SP01 PL31 and Outlook Integration PL60.
Also, what's the difference between the OIStandAlone and the OutlookIntegration files?
Best Regards,
Vítor
Message was edited by:
Vitor VieiraHello,
This issue is really interesting, I really desperate to install it. I read the note and find out that server installation must be run before initialisation of addon in the client workstation. Initialisation means addon registration. I just think the template will be created in the client workstation if the server installation has run. Both must be run. But here the explanation I've got from pdf file :
Template Layout Files for Microsoft Outlook Integration Snapshots
The SAP Business One Add-On Server Installer copies the template layout files for snapshots in the following subfolder in <B1DIR>: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\Default. However, if the SAP Business One 2005 SP01 application is not a new installation but an upgrade, the name of the subfolder is the same as for SAP Business One 2004.
In the Default folder, there are language-specific folders for all templates. After you complete the registration of the Microsoft Outlook add-on on your server and begin the initialization in a company database from a client, the add-on creates default templates for the current language of the company to which you are logged on. These default layout files are also stored in <B1DIR> in the following subfolder: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\<name of company database>\Default. When you later use the add-on to create additional default templates (by using the Create Default Templates function of the add-on), your default templates are also stored in: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\<name of company database>\Default.
However, if the application is unable to locate this folder or the folder cannot be created, a selection window will allow you to select a different location. This path will be stored in the company settings of the Microsoft Outlook Integration add-on and can be changed by you. The default layout files for the company are copied to the Default subfolder of the folder you select.
The OIStandalone is a standalone installer for the Microsoft Outlook Integration add-on. This tool allows you to install the add-on without having to install the SAP Business One client on your PC. The alternative installer is appropriate for scenarios in which the SAP Business One client is not installed on the same PC as Microsoft Outlook. An example of such a scenario is the use of the Terminal Server for SAP Business One.
If you have tried, let me know the result.
Rgds, -
Unable to Create Contract Templates In Other Business Units In Fusion Contract Management
Hi All.
I am working on Fusion PPM Release 9.
I Have set Profile Options HZ_DEFAULT_BU_CRM to SH-Business Unit & HZ_ENABLE_MULTIPLE_BU_CRM to Yes in task Manage Administrator Profile Values.
But LOV is showing only SH-Business Unit. I am not able to get other Business Units In LOV & Not able to create contract Template.
Any help regarding above issue is Appreciable
Thanks
ShaanHi Vara,
Check the basic settings for Student Contract accounting. Are you using "Create RFC Destination for Automatic Creation and Update" functionality? Please check that whether you have maintained any RFC or not. If yes, then remove that.
The automatic creation function causes the system to automatically create a student account with the account-specific master data when it creates student master data. Check this in SAP_CM_ACCOUNT_DATA_UPDATE.
The automatic update function causes the system to automatically update the relevant account data when it updates account-specific student master data.
You can activate and deactivate the automatic creation and change function. You make this setting in the IMG activity (De)Activate Automatic Student Account Creation and Update.
Regards
Vinod Kumar -
Unable to create iView from template
Hi,
I'm unable to create new iView from a template
If I try to create a new iView I get no selection of iView templates.
The step 1 of Template selection shows the message:
"No templates to display. You are not assigned to any existing templates."
I have the super_admin role but I cant see any tempates.
I checked the template folder in PCD and found my role has access to it and to the templates objects.
I have searched for an OSS but no luck.
Does anybody know a solution for this problem.
Were on NW2004s SP14
Best Regards,
RasmusHi,
The reason for this is in-sufficient permissions to the user on the applications folder.You can resolve this by navigating to :
System Administration -> Permissions -> Applications , right click on the folder and open permissions. Then assign the <b>content_admin_role</b> to this folder.
The issue will be resolved.
Regards,
Senthil K. -
Amadmin: error Unable to create template
Create service templates:
Error 10: Cannot process requests:
Unable to create template.
-> this is the error message I receive for every registred service when running this request to amadmin:
<Requests>
<OrganizationRequests DN="dc=example,dc=com">
<CreateServiceTemplate>
<Service_Name>ExampleService</Service_Name>
</CreateServiceTemplate>
</OrganizationRequests>
</Requests>
Any ideas? I have AM7 in legacy mode.even with debug.level=message im not able to see anything interesting in debug logs.. but i found some missing objects errors in DS access log:
[20/Mar/2006:11:58:26 +0100] conn=4402 op=139 msgId=152 - SRCH base="ou=default,ou=organizationconfig,ou=1.0,ou=sunidentityrepositoryservice,ou=services,dc=ami,dc=cz" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="ou sunserviceschema sunpluginschema sunkeyvalue sunxmlkeyvalue objectClass sunsmspriority sunserviceid labeledUri modifyTimestamp" authzid="dn:cn=dsameuser,ou=DSAME Users,dc=ami,dc=cz"
[20/Mar/2006:11:58:26 +0100] conn=4402 op=139 msgId=152 - RESULT err=32 tag=101 nentries=0 etime=0
[20/Mar/2006:11:58:26 +0100] conn=4402 op=140 msgId=153 - SRCH base="ou=default,ou=organizationconfig,ou=1.0,ou=sunidentityrepositoryservice,ou=services,dc=ami,dc=cz" scope=1 filter="(&(objectClass=top)(ou=*))" attrs="ou" authzid="dn:cn=dsameuser,ou=DSAME Users,dc=ami,dc=cz"
[20/Mar/2006:11:58:26 +0100] conn=4402 op=140 msgId=153 - RESULT err=32 tag=101 nentries=0 etime=0
[20/Mar/2006:11:58:27 +0100] conn=4402 op=150 msgId=163 - SRCH base="ou=default,ou=organizationconfig,ou=1.0,ou=iplanetampolicyconfigservice,ou=services,o=sunamhiddenrealmdelegationservicepermissions,ou=services,dc=ami,dc=cz" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="ou sunserviceschema sunpluginschema sunkeyvalue sunxmlkeyvalue objectClass sunsmspriority sunserviceid labeledUri modifyTimestamp" authzid="dn:cn=dsameuser,ou=DSAME Users,dc=ami,dc=cz"
[20/Mar/2006:11:58:27 +0100] conn=4402 op=150 msgId=163 - RESULT err=32 tag=101 nentries=0 etime=0 -
Unable to Load Database/Unable to create database.
RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild. -
After upgrade to CF9, CFIMAGE "Unable to create temporary file" error
We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc -
i am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name Type
appid String
location String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name Path Type
Url /text() String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.i exported the application from apex.oracle.com and imported it to our environment
import went fine, but when I ran the IR page I got
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well -
Unable to create a Driver object from driver with Media type string CTC PHO
Hi All,
I am trying to develop a siebel cti adapter for avaya.
I have loaded a custom dll into siebel server but it is throwing error "SBL-CSR-00500: Unable to create a Driver object from driver C:\Mydriver\cti.dll with Media-Type-String CTC Phone ".
It has been long time without any progress.
Please help
Thanks
NishantHi tomhowell,
According to your description, my understanding is that you got an error when you created a site from a custom site template after migrading SharePoint 2010 to your server.
Did you have the original solution file of the site template? Please re-deploy the solution to your SharePoint site, then create a site from the new site template, compare the result.
Also use SPDisposeCheck to indentify the memory leak:
http://archive.msdn.microsoft.com/SPDisposeCheck
http://www.fewlines4biju.com/2012/11/detected-use-of-sprequest-for.html
Here are some similar posts for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3a25eb86-8415-4053-b319-9dd84a1fd71f/detected-use-of-sprequest-for-previously-closed-spweb-object-please-close-spweb-objects-when-you?forum=sharepointdevelopmentprevious
http://social.msdn.microsoft.com/Forums/en-US/50ce964f-94a6-4fda-abc0-caa34e7111f1/error-detected-use-of-sprequest-for-previously-closed-spweb-object-occurs-when-new-site-gallery
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Unable to create the order *HIGHLY REWARDED*
Guru's,
I unable to create the credit memo request.
After entering sold to,material and qty and plant system is giving error Template material processing is deactivated
HIGHLY REWARDED
THANKS IN ADVANCE.
Its very urgent.
Regards,
Madhu..Hi,
Check and implement the SAP note 1094540.
Regards,
Murali -
Unable to create a whole root zone
Hi Folks,
I wanted to create a whole-root zone. I am unable to create one :(. Did some one encounter this problem ?.
BTW: I have SC 3.2 installed on this two node cluster. I was able to validate our Data services on this setup without any problem Now I am trying to experiment with zones, by creating zones. I am unable to move further with my validation of our data services on zones.
*) mkdir -m 700 /export/zone-1
*) The version of the OS used
# cat /etc/release
Solaris 10 11/06 s10s_u3wos_09 SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 01 November 2006
# zonecfg -z zone-1
zone-1: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zone-1> create
zonecfg:zone-1> remove inherit-pkg-dir dir=/sbin
zonecfg:zone-1> remove inherit-pkg-dir dir=/usr
zonecfg:zone-1> remove inherit-pkg-dir dir=/platform
zonecfg:zone-1> remove inherit-pkg-dir dir=/lib
zonecfg:zone-1> set autoboot=true
zonecfg:zone-1> set zonepath=/export/zone-1
zonecfg:zone-1> add net
zonecfg:zone-1:net> set address=192.18.75.237
zonecfg:zone-1:net> set physical=eri0
zonecfg:zone-1:net> end
zonecfg:zone-1> info
zonename: zone-1
zonepath: /export/zone-1
autoboot: true
pool:
limitpriv:
net:
address: 192.18.75.237
physical: eri0
zonecfg:zone-1> verify
zonecfg:zone-1> commit
zonecfg:zone-1> exit
# cat /etc/zones/zone-1.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE zone PUBLIC "-//Sun Microsystems Inc//DTD Zones//EN" "file:///usr/share/lib/xml/dtd/zonecfg.dtd.1">
<!--
DO NOT EDIT THIS FILE. Use zonecfg(1M) instead.
-->
<zone name="zone-1" zonepath="/export/zone-1" autoboot="true">
<network address="192.18.75.237" physical="eri0"/>
</zone>
# zoneadm list -civ
ID NAME STATUS PATH
0 global running /
- zone-1 configured /export/zone-1
# zoneadm -z zone-1 verify
# zoneadm -z zone-1 install
Preparing to install zone <zone-1>.
Creating list of files to copy from the global zone.
Copying <6080> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1071> packages on the zone.
Initialized <1071> packages on zone.
Zone <zone-1> is initialized.
Installation of these packages generated errors: <SUNWsczr SUNWdtlog SUNWsmmgr>
Installation of <1> packages was skipped.
Installation of these packages generated warnings: <SUNWcsr SUNWxwplr SUNWfontconfig-root SUNWpcr SUNWdtdmr SUNWtnamr SUNWkrbr SUNWtnetr SUNWdoc SUNWppror SUNWocfr SUNWvolr SUNWnfscr SUNWwbcor SUNWwebminr SUNWgssc SUNWnisr SUNWypr SUNWipplr SUNWaccr SUNWbsr SUNWdhcsr SUNWatfsr SUNWkdcr SUNWapch2r SUNWbindr SUNWbnur SUNWcnsr SUNWpsr SUNWsacom SUNWnfssr SUNWntpr SUNWftpr SUNWrcapr SUNWrcmdr SUNWslpr SUNWsndmr SUNWsshdr SUNWstsfr SUNWswupclr>
The file </export/zone-1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
# pkginfo -i SUNWsczr
application SUNWsczr Sun Cluster (non-global zones support)
# pkginfo -i SUNWsczr
application SUNWsczr Sun Cluster (non-global zones support)
# pkginfo -i SUNWdtlog
system SUNWdtlog System boot for Desktop Login
# pkginfo -i SUNWsmmgr
system SUNWsmmgr System Management Agent Startup scripts
*** package <SUNWsczr> failed to install with fatal errors:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/stoprgm> failed
pathname does not exist
NOTE: When the package <SUNWsczr> was installed in the global zone, the file <etc/init.d/stoprgm> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone <zone-1> in the file </export/zone-1/root/etc/init.d/stoprgm>.
ERROR : i.manifest cannot find archived files in /var/sadm/pkg/SUNWsczr/save/pspool/SUNWsczr/archive.
pkgadd: ERROR: class action script did not complete successfully
Installation of <SUNWsczr> on zone <zone-1> failed.
*** package <SUNWnisr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/nsswitch.nis> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <etc/nsswitch.nis> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/nsswitch.nis>.
WARNING: attribute verification of </export/zone-1/root/etc/nsswitch.nisplus> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <etc/nsswitch.nisplus> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/nsswitch.nisplus>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/nisplus> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <lib/svc/method/nisplus> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/nisplus>.
WARNING: attribute verification of </export/zone-1/root/var/nis/NIS+LDAPmapping.template> failed
pathname does not exist
NOTE: When the package <SUNWnisr> was installed in the global zone,
the file <var/nis/NIS+LDAPmapping.template> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/nis/NIS+LDAPmapping.template>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ nis/client.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ rpc/nisplus.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ rpc/rex.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/client.xml> failed
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/client.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/nisplus.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rex.xml> failed
pathname does not exist
Installation of <SUNWnisr> on zone <zone-1> partially
failed.
*** package <SUNWypr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/var/yp/updaters> failed
pathname does not exist
NOTE: When the package <SUNWypr> was installed in the global zone,
the file <var/yp/updaters> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/yp/updaters>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/passwd.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/server.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/update.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/xfr.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/passwd.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/server.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/update.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/xfr.xml> failed
pathname does not exist
Installation of <SUNWypr> on zone <zone-1> partially
failed.
*** package <SUNWipplr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWipplr/save/pspool/SUNWipplr/reloc/var/svc/manifest/applic ation/print/ipp-listener.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/print/ipp-listener.xml> failed
pathname does not exist
Installation of <SUNWipplr> on zone <zone-1> partially
failed.
*** package <SUNWaccr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-sar> failed
pathname does not exist
NOTE: When the package <SUNWaccr> was installed in the global zone,
the file <lib/svc/method/svc-sar> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-sar>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWaccr/save/pspool/SUNWaccr/reloc/var/svc/manifest/system/s ar.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/sar.xml> failed
pathname does not exist
Installation of <SUNWaccr> on zone <zone-1> partially
failed.
*** package <SUNWbsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/rpld.conf> failed
pathname does not exist
NOTE: When the package <SUNWbsr> was installed in the global zone,
the file <etc/rpld.conf> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/rpld.conf>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbsr/save/pspool/SUNWbsr/reloc/var/svc/manifest/network/ra rp.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbsr/save/pspool/SUNWbsr/reloc/var/svc/manifest/network/rp c/bootparams.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rarp.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/bootparams.xml> failed
pathname does not exist
Installation of <SUNWbsr> on zone <zone-1> partially
failed.
*** package <SUNWdhcsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/dhcp> failed
pathname does not exist
NOTE: When the package <SUNWdhcsr> was installed in the global zone,
the file <etc/init.d/dhcp> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/init.d/dhcp>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWdhcsr/save/pspool/SUNWdhcsr/reloc/var/svc/manifest/networ k/dhcp-server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/dhcp-server.xml> failed
pathname does not exist
Installation of <SUNWdhcsr> on zone <zone-1> partially
failed.
*** package <SUNWatfsr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-autofs> failed
pathname does not exist
NOTE: When the package <SUNWatfsr> was installed in the global zone,
the file <lib/svc/method/svc-autofs> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-autofs>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWatfsr/save/pspool/SUNWatfsr/reloc/var/svc/manifest/system /filesystem/autofs.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/filesystem/autofs.xml> failed
pathname does not exist
Installation of <SUNWatfsr> on zone <zone-1> partially
failed.
*** package <SUNWkdcr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWkdcr/save/pspool/SUNWkdcr/reloc/var/svc/manifest/network/ security/krb5_prop.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/security/krb5_prop.xml> failed
pathname does not exist
Installation of <SUNWkdcr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/var/apache2/icons/world2.gif> failed
pathname does not exist
NOTE: When the package <SUNWapch2r> was installed in the global zone,
the file <var/apache2/icons/world2.gif> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/apache2/icons/world2.gif>.
WARNING: attribute verification of </export/zone-1/root/var/apache2/icons/world2.png> failed
pathname does not exist
NOTE: When the package <SUNWapch2r> was installed in the global zone,
the file <var/apache2/icons/world2.png> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/apache2/icons/world2.png>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWapch2r/save/pspool/SUNWapch2r/reloc/var/svc/manifest/netw ork/http-apache2.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/http-apache2.xml> failed
pathname does not exist
Installation of <SUNWapch2r> on zone <zone-1> partially
failed.
*** package <SUNWbindr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbindr/save/pspool/SUNWbindr/reloc/var/svc/manifest/networ k/dns/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/dns/server.xml> failed
pathname does not exist
Installation of <SUNWbindr> on zone <zone-1> partially
failed.
*** package <SUNWbnur> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWbnur/save/pspool/SUNWbnur/reloc/var/svc/manifest/network/ uucp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/uucp.xml> failed
pathname does not exist
Installation of <SUNWbnur> on zone <zone-1> partially
failed.
*** package <SUNWcnsr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ chargen.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ daytime.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ discard.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ echo.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ time.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/chargen.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/daytime.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/discard.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/echo.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/time.xml> failed
pathname does not exist
Installation of <SUNWcnsr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/etc/lp/fd/pr.fd> failed
pathname does not exist
NOTE: When the package <SUNWpsr> was installed in the global zone,
the file <etc/lp/fd/pr.fd> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/lp/fd/pr.fd>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/print-svc> failed
pathname does not exist
NOTE: When the package <SUNWpsr> was installed in the global zone,
the file <lib/svc/method/print-svc> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/print-svc>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWpsr/save/pspool/SUNWpsr/reloc/var/svc/manifest/applicatio n/print/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/print/server.xml> failed
pathname does not exist
Installation of <SUNWpsr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/var/snmp/mib/sun.mib> failed
pathname does not exist
NOTE: When the package <SUNWsacom> was installed in the global zone,
the file <var/snmp/mib/sun.mib> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/var/snmp/mib/sun.mib>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/etc/init.d/init.dmi> is corrupt
file size <373> expected <1125> actual
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/etc/init.d/init.snmpdx& gt; is corrupt
file size <382> expected <685> actual
ERROR: attribute verification of </export/zone-1/root/etc/init.d/init.dmi> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/etc/init.d/init.snmpdx> failed
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/var/svc/manifest/applic ation/management/dmi.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/var/svc/manifest/applic ation/management/snmpdx.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/management/dmi.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/management/snmpdx.xml> failed
pathname does not exist
Installation of <SUNWsacom> on zone <zone-1> partially
failed.
*** package <SUNWdtlog> failed to install with fatal errors:
WARNING: attribute verification of </export/zone-1/root/etc/init.d/dtlogin> failed
pathname does not exist
NOTE: When the package <SUNWdtlog> was installed in the global zone,
the file <etc/init.d/dtlogin> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/init.d/dtlogin>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-dtlogin> failed
pathname does not exist
NOTE: When the package <SUNWdtlog> was installed in the global zone,
the file <lib/svc/method/svc-dtlogin> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/svc-dtlogin>.
ERROR : i.manifest cannot find archived files in /var/sadm/pkg/SUNWdtlog/save/pspool/SUNWdtlog/archive.
pkgadd: ERROR: class action script did not complete successfully
Installation of <SUNWdtlog> on zone <zone-1> failed.
*** package <SUNWnfssr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/nfs-server> failed
pathname does not exist
NOTE: When the package <SUNWnfssr> was installed in the global zone,
the file <lib/svc/method/nfs-server> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/nfs-server>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnfssr/save/pspool/SUNWnfssr/reloc/var/svc/manifest/networ k/nfs/rquota.xml> is corrupt
pathname does not exist
pkgadd: ERROR: source path </var/sadm/pkg/SUNWnfssr/save/pspool/SUNWnfssr/reloc/var/svc/manifest/networ k/nfs/server.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nfs/rquota.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nfs/server.xml> failed
pathname does not exist
Installation of <SUNWnfssr> on zone <zone-1> partially
failed.
*** package <SUNWntpr> installed with warnings:
WARNING: attribute verification of </export/zone-1/root/etc/inet/ntp.server> failed
pathname does not exist
NOTE: When the package <SUNWntpr> was installed in the global zone,
the file <etc/inet/ntp.server> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/etc/inet/ntp.server>.
WARNING: attribute verification of </export/zone-1/root/lib/svc/method/xntp> failed
pathname does not exist
NOTE: When the package <SUNWntpr> was installed in the global zone,
the file <lib/svc/method/xntp> was also installed. After the file was
installed in the global zone, the contents and/or attributes of the file
changed. The contents of this file must never be changed. As a result,
the changes in this file have been duplicated in the non-global zone
<zone-1> in the file </export/zone-1/root/lib/svc/method/xntp>.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWntpr/save/pspool/SUNWntpr/reloc/var/svc/manifest/network/ ntp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/ntp.xml> failed
pathname does not exist
Installation of <SUNWntpr> on zone <zone-1> partially
failed.
*** package <SUNWftpr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWftpr/save/pspool/SUNWftpr/reloc/var/svc/manifest/network/ ftp.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/ftp.xml> failed
pathname does not exist
Installation of <SUNWftpr> on zone <zone-1> partially
failed.
*** package <SUNWrcapr> installed with warnings:
pkgadd: ERROR: source path </var/sadm/pkg/SUNWrcapr/save/pspool/SUNWrcapr/reloc/var/svc/manifest/system /rcap.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/rcap.xml> failed
pathname does not exist
Installation of <SUNWrcapr> on zone <zone-1> partially
failed.
pkgadd: ERROR: source path </var/sadm/pkg/SUNWrcmdr/save/pspool/SUNWrcmdr/reloc/var/svc/manifest/networ k/talk.xml> is corrupt
pathname does not exist
chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/comsat.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/finger.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/login.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rexec.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rstat.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rusers.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/spray.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/wall.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/shell.xml> failed
pathname does not exist
ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/talk.xml> failed
pathname does not exist
Installation of <SUNWrcmdr> on zone <zone-1> partially
failed.
WARNING: attribute verification of </export/zone-1/root/etc/sma/snmp/snmpconf-data/snmptrapd-data/traphandle> ; failed
pathname does not exist
NOTE: When the package <SUNWsmmgr> was installed in the global zone,
the file <etc/sma/snmp/snmpconf-data/snmptrapd-data/traphandle> was also installed. AfHello,
I still get the errors.
# zonecfg -z zone-one
zone-one: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zone-one> create -b
zonecfg:zone-one> set autoboot=true
zonecfg:zone-one> set zonepath=/export/zone-one
zonecfg:zone-one> add net
zonecfg:zone-one:net> set physical=eri0
zonecfg:zone-one:net> set address=192.18.xx.xxx
zonecfg:zone-one:net> end
zonecfg:zone-one> verify
zonecfg:zone-one> commit
zonecfg:zone-one> exit
# zoneadm -z zone-one verify
# zoneadm -z zone-one install
Preparing to install zone <zone-one>.
Creating list of files to copy from the global zone.
Copying <6080> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1071> packages on the zone.
Initialized <1071> packages on zone.
Zone <zone-one> is initialized.
Installation of these packages generated errors: <SUNWsczr SUNWdtlog SUNWsmmgr>
Installation of <1> packages was skipped.
Installation of these packages generated warnings: <SUNWcsr SUNWxwplr SUNWfontconfig-root SUNWpcr SUNWdtdmr SUNWtnamr SUNWkrbr SUNWtnetr SUNWdoc SUNWppror SUNWocfr SUNWvolr SUNWnfscr SUNWwbcor SUNWwebminr SUNWgssc SUNWnisr SUNWypr SUNWipplr SUNWaccr SUNWbsr SUNWdhcsr SUNWatfsr SUNWkdcr SUNWapch2r SUNWbindr SUNWbnur SUNWcnsr SUNWpsr SUNWsacom SUNWnfssr SUNWntpr SUNWftpr SUNWrcapr SUNWrcmdr SUNWslpr SUNWsndmr SUNWsshdr SUNWstsfr SUNWswupclr>
The file </export/zone-1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
_DD -
Unable to create service central contract items
Hi Experts
We are in SRM 7 EHP 2 ECC 6 EHP 6
We are unable to create Central Contract with Service.
There is no "Outline" or "Service" on drop down from ADD LINE in Central Contract.
Please help urgently.
Thanks
AjitHi Ajit,
Please check if hierarchy template HIER_SE is assigned to this contract transaction type in the following customizing.
spro -> SRM Server -> Cross-Application Basic Settings -> Service Procurement Activate Service Procurement
Also SM34: /SAPPSSRM/VC_HT -> Assign to Transaction Type
Best regards,
Wendy -
Unable to create Business System with role Integration Server
hi Experts,
we are unable to create a BS with role of integration server, its throwing error with internal server 500.
please advise. we do not have any issues while creating TS with role of WEBASABAP.
thanks and regards,
Kesava
Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AMHi Kesava,
what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
best regards,
Markus -
Unable to create native thread in Normal Condition
I am trying to analyze the "OOM unable to create native thread" error that occurred in our application. I wrote a sample program which has to creates 5000 threads and monitored it using JConsole.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
* ThreadJvmMemory.java
* Created on June 1, 2007, 9:49 AM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* @author Administrator
public class ThreadJvmMemory extends Thread{
/** Creates a new instance of ThreadJvmMemory */
BufferedReader in = null;
public ThreadJvmMemory() {
public static void main(String args[]){
ThreadJvmMemory dummy = new ThreadJvmMemory();
dummy.waitTillEnter();
for(int i=0;i<5000;i++){
if(i%1000==0){
System.out.println(i);
dummy.waitTillEnter();
ThreadJvmMemory dummy1 = new ThreadJvmMemory();
dummy1.start();
public void run(){
//System.out.println("Here");
Object dummyObject = new Object();
try {
in = new BufferedReader(new InputStreamReader(System.in));
in.readLine();
} catch (IOException ex) {
ex.printStackTrace();
System.out.println("Came out of the thread");
public void waitTillEnter(){
try {
if(in==null)
in = new BufferedReader(new InputStreamReader(System.in));
in.readLine();
} catch (IOException ex) {
ex.printStackTrace();
I started the program using the following command line option..
"c:\Program Files\Java\jdk1.5.0_09\bin\java.exe" -Dcom.sun.management.jmxremote.port=9979 -Xmx512m -Xminf0.1 -Xmaxf0.1 -XX:MaxPermSize=256m -XX:PermSize=256m -XX:+<GCTYPE> -XX:+PrintGCDetails
where GCType will be UseTrainGC or UseSerialGC or UseParallelGC or
What i observe in all the cases, there are no more than 1000 threads getting created . After completion of 1000 threads garbage collector keeps running and no more threads get created. Since i have configured heapsize to be 512m, PermGenSpace to be 256 and default value for process sapece is 2gb, JVM would be able to create only 1000 threads as per the formula "NoOfThreads = Process space - (Heap + permGen+some for VM initialization)/Stack Size" (correct me if i am wrong). But why i am not getting OutOfMemoryError while creating native thread. Moreover i can observer non-heap (Perm Gen) space keep growing overtime. But there is enough space in all other spaces.So my doubts are
1. Actually when we will get OOM error saying unable to create Native thread. To be more specific when which space occupied i will get this error.
2. Is there any way to configure process space. IMO No ?? Confirm ??
3. Does any one tried using a a tool that analyzes verboseGC output of SUN JVM. If so can you give any pointer. I have read through GCPortal, but i havent fully deployed it.
Java version is 1.5.0
OS Windows 2k3
Snippet of GC Output
[GC [DefNew: 5208K->38K(5824K), 0.0072564 secs] 32049K->26879K(34636K), 0.0080451 secs]
[GC [DefNew: 5222K->24K(5824K), 0.0070320 secs] 32063K->26868K(34636K), 0.0078097 secs]
[GC [DefNew: 5208K->39K(5824K), 0.0082161 secs] 32052K->26883K(34636K), 0.0090173 secs]
[GC [DefNew: 5223K->27K(5824K), 0.0080766 secs] 32067K->26874K(34636K), 0.0089273 secs]
[GC [DefNew: 5211K->39K(5824K), 0.0071186 secs] 32058K->26886K(34636K), 0.0078970 secs]
[GC [DefNew: 5223K->25K(5824K), 0.0070952 secs] 32070K->26875K(34636K), 0.0078766 secs]
[GC [DefNew: 5209K->21K(5824K), 0.0069871 secs] 32059K->26872K(34636K), 0.0077657 secs]I am trying to analyze the "OOM unable to create native thread" error that occurred in our application. I wrote a sample program which has to creates 5000 threads and monitored it using JConsole.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
* ThreadJvmMemory.java
* Created on June 1, 2007, 9:49 AM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* @author Administrator
public class ThreadJvmMemory extends Thread{
/** Creates a new instance of ThreadJvmMemory */
BufferedReader in = null;
public ThreadJvmMemory() {
public static void main(String args[]){
ThreadJvmMemory dummy = new ThreadJvmMemory();
dummy.waitTillEnter();
for(int i=0;i<5000;i++){
if(i%1000==0){
System.out.println(i);
dummy.waitTillEnter();
ThreadJvmMemory dummy1 = new ThreadJvmMemory();
dummy1.start();
public void run(){
//System.out.println("Here");
Object dummyObject = new Object();
try {
in = new BufferedReader(new InputStreamReader(System.in));
in.readLine();
} catch (IOException ex) {
ex.printStackTrace();
System.out.println("Came out of the thread");
public void waitTillEnter(){
try {
if(in==null)
in = new BufferedReader(new InputStreamReader(System.in));
in.readLine();
} catch (IOException ex) {
ex.printStackTrace();
I started the program using the following command line option..
"c:\Program Files\Java\jdk1.5.0_09\bin\java.exe" -Dcom.sun.management.jmxremote.port=9979 -Xmx512m -Xminf0.1 -Xmaxf0.1 -XX:MaxPermSize=256m -XX:PermSize=256m -XX:+<GCTYPE> -XX:+PrintGCDetails
where GCType will be UseTrainGC or UseSerialGC or UseParallelGC or
What i observe in all the cases, there are no more than 1000 threads getting created . After completion of 1000 threads garbage collector keeps running and no more threads get created. Since i have configured heapsize to be 512m, PermGenSpace to be 256 and default value for process sapece is 2gb, JVM would be able to create only 1000 threads as per the formula "NoOfThreads = Process space - (Heap + permGen+some for VM initialization)/Stack Size" (correct me if i am wrong). But why i am not getting OutOfMemoryError while creating native thread. Moreover i can observer non-heap (Perm Gen) space keep growing overtime. But there is enough space in all other spaces.So my doubts are
1. Actually when we will get OOM error saying unable to create Native thread. To be more specific when which space occupied i will get this error.
2. Is there any way to configure process space. IMO No ?? Confirm ??
3. Does any one tried using a a tool that analyzes verboseGC output of SUN JVM. If so can you give any pointer. I have read through GCPortal, but i havent fully deployed it.
Java version is 1.5.0
OS Windows 2k3
Snippet of GC Output
[GC [DefNew: 5208K->38K(5824K), 0.0072564 secs] 32049K->26879K(34636K), 0.0080451 secs]
[GC [DefNew: 5222K->24K(5824K), 0.0070320 secs] 32063K->26868K(34636K), 0.0078097 secs]
[GC [DefNew: 5208K->39K(5824K), 0.0082161 secs] 32052K->26883K(34636K), 0.0090173 secs]
[GC [DefNew: 5223K->27K(5824K), 0.0080766 secs] 32067K->26874K(34636K), 0.0089273 secs]
[GC [DefNew: 5211K->39K(5824K), 0.0071186 secs] 32058K->26886K(34636K), 0.0078970 secs]
[GC [DefNew: 5223K->25K(5824K), 0.0070952 secs] 32070K->26875K(34636K), 0.0078766 secs]
[GC [DefNew: 5209K->21K(5824K), 0.0069871 secs] 32059K->26872K(34636K), 0.0077657 secs] -
Unable to create custom analytic in dashboard and analytics in infoview
Hi all,
i am unable to create a custom analytic in dashboard and analytics in infoview, the error i am getting is there is no xcelsius template available consult xcelsius .
Need help ?
regards
Abid PaulHello Falk,
thanks for the reply
this is not the error i am getting in Xcelsius.but this is the error which i am getting in INFOVIEW BO edge standard 3.1 when i am trying to create custom analytic in corporate dashboard FROM INFOVIEW.
THE error i am getting is there are no xcelsius templates availabe consult xcelsius.
i would really appreciate if you could help me regarding this
Regards and thanks
ABID PAUL
Maybe you are looking for
-
Can anybody help me!?? I have made a big mistake on my itunes i think. My nano was full so itunes suggested it create a playlist to sync to and I deleted it (I know I shouldn't have!) All my songs are still on itunes but when I try and sync my ipod t
-
How do I get the Open Dialog on Android ICS 4.0?
Hi, I am using Flash CS6, Android setup, 3.0 AS I have a Galaxy Tab, ICS 4.0 for a device I can read & write a text file perfectly fine on my PC. But, when I upload to my Galaxy Tab 2 (7").... 1) I get a generic dialog that displays my path (/mnt/sdc
-
Dear wire workers I got my LV 8 and played around with it. The new project is a great enhancement but one thing realy is nearly amazing. In LV 5 a app buid of a comparable project was 5MB. In LV 7.1.1 about 10MB and in LV 8 about 70MB. For what? I ju
-
Downgrading Image Resolution Using JAI
I am interested in downgrading the resolution of TIFF images that I am inserting into a PDF to reduce the document's file size. The TIFF images are either CCITT G4 bitonal or JPEG RGB. What would be the best approach to doing this using JAI? I apprec
-
I did an update on my Apple TV and now iTunes is asking for a password to access AppleTV under multiple speakers. My Apple password isn't working...any ideas? THANKS