Unable to Delete the Business Objects Installation folder

Hi,
I am trying to re-install the Business Objects 4.1 SP4 on my Dev Machine. I have un-installed BO4.1 by going to Control Panel>programes & Features>uninstall. After i completed the unistall process i have rebooted my machine and still saw the Business Objects folder in the Installation Drive.
I am trying to delete the folder but unable to do it. it reads 'The Action Cant be completed because the folder or file in it is open in another program'. is there any way to get rid of this error and delete the folder to start fresh new installation??

Hi,
To delete the folder you can use rococopy command.
Follow steps
1) Create one dummy folder "xx" on the same level where the already folder exists.let say i want to delete Test folder and folder location is F:/Test and create xx on the same level.
2) Go back one level up like on F:/ drive right click and command prompt.
3) run the command robocopy Test xx /MIR
After that you will be able to delete the folder.
or run one more command to delete the folder from command prompt.
rd/s F:\Test
Regards,
Amit

Similar Messages

  • Oralce B2B 10g unable to delete the xml from ftp folder

    Hi,
    Oracle B2B is polling in to a ftp folder which is located on different IP.
    After picking-up the xml from this folder, b2b should delete the xml but, it is unable to delete the xml.
    and as a result same xml is picked-up multiple times. could you please help us here?
    Regards

    Manually I am able to delete the xml from thr FTP folder
    Also below is the text of b2b-idc log generated
    2012.06.06 at 13:46:00:296: B2BStarter thread: (DEBUG) TransportProperties.TransportProperties():markerbasedpoll=false;file.receiver.wallet_location=/etc/ORACLE/WALLETS/ows/ewallet.p12;file.receiver.polling_interval=5;file.receiver.path=/wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound;file.receiver.marker=false;marker=false;ccc=false;filename_separator=-;file.receiver.channel_mask=None;port=21;file.receiver.minimum_age=0;filename_format=%TO_PARTY%-%SERVICE%-%ACTIONNAME%-%INREPLYTO_MSG_ID%.xml;file.receiver.van=false;keep_connections=false;file.sender.channel_mask=None;file.receiver.user=gsb2bdA;file.receiver.archive_dir=null;file.receiver.markerbasedpoll=false;file.receiver.password=******;file.receiver.preserve_filename=false;transport_callout_waittime=30;preserve_filename=false;file.receiver.keep_connections=false;file.receiver.ccc=false;van=false;polling_interval=5;
    2012.06.06 at 13:46:00:336: B2BStarter thread: (DEBUG) initialize TransportReceiver: [PG_Transport_Server_new < ftp > < CIT >]
    2012.06.06 at 13:46:00:338: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
    2012.06.06 at 13:46:00:375: B2BStarter thread: (DEBUG) FTPAgent.login(): Enter
    2012.06.06 at 13:46:00:377: B2BStarter thread: (DEBUG) Host name is 'hwspxv006'.
    2012.06.06 at 13:46:00:484: B2BStarter thread: (DEBUG) Host hwspxv006 FTP command: USER gsb2bdA
    2012.06.06 at 13:46:00:486: B2BStarter thread: (DEBUG) FTP Command: USER, reply:
    331 Password required for gsb2bdA.
    2012.06.06 at 13:46:00:488: B2BStarter thread: (DEBUG) Host hwspxv006 FTP command: PASS
    2012.06.06 at 13:46:00:903: B2BStarter thread: (DEBUG) FTP Command: PASS, reply:
    230-Please read the file README-btwlutils.txt230- it was last modified on Wed Jul 1 17:09:58 2009 - 1071 days ago230 User gsb2bdA logged in.
    2012.06.06 at 13:46:00:908: B2BStarter thread: (DEBUG) FTPAgent.login(): Exit
    2012.06.06 at 13:46:00:910: B2BStarter thread: (DEBUG) Disconnecting from hwspxv006
    2012.06.06 at 13:46:00:979: B2BStarter thread: (DEBUG) Host hwspxv006 disconnected.
    2012.06.06 at 13:46:01:003: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
    2012.06.06 at 13:46:01:004: Thread-13: (DEBUG) FTPAgent.login(): Enter
    2012.06.06 at 13:46:01:006: Thread-13: (DEBUG) Host name is 'hwspxv006'.
    2012.06.06 at 13:46:01:077: Thread-13: (DEBUG) Host hwspxv006 FTP command: USER gsb2bdA
    2012.06.06 at 13:46:01:079: Thread-13: (DEBUG) FTP Command: USER, reply:
    331 Password required for gsb2bdA.
    2012.06.06 at 13:46:01:080: Thread-13: (DEBUG) Host hwspxv006 FTP command: PASS
    2012.06.06 at 13:46:01:356: Thread-13: (DEBUG) FTP Command: PASS, reply:
    230-Please read the file README-btwlutils.txt230- it was last modified on Wed Jul 1 17:09:58 2009 - 1071 days ago230 User gsb2bdA logged in.
    2012.06.06 at 13:46:01:357: Thread-13: (DEBUG) FTPAgent.login(): Exit
    2012.06.06 at 13:46:01:359: Thread-13: (DEBUG) Host hwspxv006 FTP command: PASV
    2012.06.06 at 13:46:01:361: Thread-13: (DEBUG) FTP Command: PASV, reply:
    227 Entering Passive Mode (147,149,200,111,175,184)
    2012.06.06 at 13:46:01:362: Thread-13: (DEBUG) Passive: ip = 147.149.200.111, port = 44984
    2012.06.06 at 13:46:01:364: Thread-13: (STATUS) Connecting to hwspxv006:44984
    2012.06.06 at 13:46:01:366: Thread-13: (DEBUG) Host hwspxv006 FTP command: NLST //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound
    2012.06.06 at 13:46:01:368: Thread-13: (DEBUG) FTP Command: NLST, reply:
    150 Opening ASCII mode data connection for file list.
    2012.06.06 at 13:46:01:375: Thread-13: (DEBUG) Disconnecting from hwspxv006
    2012.06.06 at 13:46:01:377: Thread-13: (DEBUG) Host hwspxv006 disconnected.
    2012.06.06 at 13:46:01:380: Thread-13: (DEBUG) [IPT_FileRecMonitorProcessFile] Processing file BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml in transport layer.
    2012.06.06 at 13:46:01:381: Thread-13: (DEBUG) FTPAgent.login(): Enter
    2012.06.06 at 13:46:01:383: Thread-13: (DEBUG) Host name is 'hwspxv006'.
    2012.06.06 at 13:46:01:447: Thread-13: (DEBUG) Host hwspxv006 FTP command: USER gsb2bdA
    2012.06.06 at 13:46:01:448: Thread-13: (DEBUG) FTP Command: USER, reply:
    331 Password required for gsb2bdA.
    2012.06.06 at 13:46:01:450: Thread-13: (DEBUG) Host hwspxv006 FTP command: PASS
    2012.06.06 at 13:46:01:726: Thread-13: (DEBUG) FTP Command: PASS, reply:
    230-Please read the file README-btwlutils.txt230- it was last modified on Wed Jul 1 17:09:58 2009 - 1071 days ago230 User gsb2bdA logged in.
    2012.06.06 at 13:46:01:731: Thread-13: (DEBUG) FTPAgent.login(): Exit
    2012.06.06 at 13:46:01:732: Thread-13: (DEBUG) Host hwspxv006 FTP command: CWD //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound
    2012.06.06 at 13:46:01:771: Thread-13: (DEBUG) FTP Command: CWD, reply:
    250 CWD command successful.
    2012.06.06 at 13:46:01:773: Thread-13: (DEBUG) Host hwspxv006 FTP command: PASV
    2012.06.06 at 13:46:01:775: Thread-13: (DEBUG) FTP Command: PASV, reply:
    227 Entering Passive Mode (147,149,200,111,72,215)
    2012.06.06 at 13:46:01:776: Thread-13: (DEBUG) Passive: ip = 147.149.200.111, port = 18647
    2012.06.06 at 13:46:01:778: Thread-13: (STATUS) Connecting to hwspxv006:18647
    2012.06.06 at 13:46:01:787: Thread-13: (DEBUG) Host hwspxv006 FTP command: TYPE I
    2012.06.06 at 13:46:01:789: Thread-13: (DEBUG) FTP Command: TYPE, reply:
    200 Type set to I.
    2012.06.06 at 13:46:01:790: Thread-13: (DEBUG) Host hwspxv006 FTP command: RETR BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml
    2012.06.06 at 13:46:01:793: Thread-13: (DEBUG) FTP Command: RETR, reply:
    150 Opening BINARY mode data connection for BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml (2257 bytes).
    2012.06.06 at 13:46:01:796: Thread-13: (DEBUG) Disconnecting from hwspxv006
    2012.06.06 at 13:46:01:798: Thread-13: (DEBUG) Host hwspxv006 disconnected.
    2012.06.06 at 13:46:01:834: Thread-13: (DEBUG) Conversion of file BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml to TransportMessage is completed.
    2012.06.06 at 13:46:17:355: Thread-13: (DEBUG) Move file to archive null
    2012.06.06 at 13:46:17:356: Thread-13: (DEBUG) FileSourceMonitor.moveFile(MessageOrigin): begin to move BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml in //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound to null
    2012.06.06 at 13:46:17:359: Thread-13: (DEBUG) Host name is 'hwspxv006'.
    2012.06.06 at 13:46:17:462: Thread-13: (DEBUG) Host hwspxv006 FTP command: USER gsb2bdA
    2012.06.06 at 13:46:17:464: Thread-13: (DEBUG) FTP Command: USER, reply:
    331 Password required for gsb2bdA.
    2012.06.06 at 13:46:17:466: Thread-13: (DEBUG) Host hwspxv006 FTP command: PASS
    2012.06.06 at 13:46:18:051: Thread-13: (DEBUG) FTP Command: PASS, reply:
    230-Please read the file README-btwlutils.txt230- it was last modified on Wed Jul 1 17:09:58 2009 - 1071 days ago230 User gsb2bdA logged in.
    2012.06.06 at 13:46:18:055: Thread-13: (DEBUG) Host hwspxv006 FTP command: CWD //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound
    2012.06.06 at 13:46:18:081: Thread-13: (DEBUG) FTP Command: CWD, reply:
    250 CWD command successful.
    2012.06.06 at 13:46:18:083: Thread-13: (DEBUG) Host hwspxv006 FTP command: RNFR //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound/BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml
    2012.06.06 at 13:46:18:084: Thread-13: (DEBUG) FTP Command: RNFR, reply:
    350 File exists, ready for destination name
    2012.06.06 at 13:46:18:086: Thread-13: (DEBUG) FTPClient.renameFrom(): 350 File exists, ready for destination name
    2012.06.06 at 13:46:18:087: Thread-13: (DEBUG) Host hwspxv006 FTP command: RNTO null/BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml
    2012.06.06 at 13:46:18:090: Thread-13: (DEBUG) FTP Command: RNTO, reply:
    550 rename: No such file or directory.
    2012.06.06 at 13:46:18:091: Thread-13: (DEBUG) FTPClient.renameTo(): 550 rename: No such file or directory.
    2012.06.06 at 13:46:18:092: Thread-13: (ERROR) FTPClient.renameTo(): Unable to RNTO file null/BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml', reply code = 550
    2012.06.06 at 13:46:18:093: Thread-13: (DEBUG) File has been already archived BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml in //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound to null
    2012.06.06 at 13:46:18:094: Thread-13: (DEBUG) Moved file BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml in //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound to null
    2012.06.06 at 13:46:18:109: Thread-13: (DEBUG) Host name is 'hwspxv006'.
    2012.06.06 at 13:46:18:190: Thread-13: (DEBUG) Host hwspxv006 FTP command: USER gsb2bdA
    2012.06.06 at 13:46:18:193: Thread-13: (DEBUG) FTP Command: USER, reply:
    331 Password required for gsb2bdA.
    2012.06.06 at 13:46:18:194: Thread-13: (DEBUG) Host hwspxv006 FTP command: PASS
    2012.06.06 at 13:46:18:471: Thread-13: (DEBUG) FTP Command: PASS, reply:
    230-Please read the file README-btwlutils.txt230- it was last modified on Wed Jul 1 17:09:58 2009 - 1071 days ago230 User gsb2bdA logged in.
    2012.06.06 at 13:46:18:474: Thread-13: (DEBUG) Host hwspxv006 FTP command: PASV
    2012.06.06 at 13:46:18:475: Thread-13: (DEBUG) FTP Command: PASV, reply:
    227 Entering Passive Mode (147,149,200,111,171,164)
    2012.06.06 at 13:46:18:477: Thread-13: (DEBUG) Passive: ip = 147.149.200.111, port = 43940
    2012.06.06 at 13:46:18:478: Thread-13: (STATUS) Connecting to hwspxv006:43940
    2012.06.06 at 13:46:18:480: Thread-13: (DEBUG) Host hwspxv006 FTP command: NLST //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound
    2012.06.06 at 13:46:18:482: Thread-13: (DEBUG) FTP Command: NLST, reply:
    150 Opening ASCII mode data connection for file list.
    2012.06.06 at 13:46:18:483: Thread-13: (DEBUG) Disconnecting from hwspxv006
    2012.06.06 at 13:46:18:485: Thread-13: (DEBUG) Host hwspxv006 disconnected.
    2012.06.06 at 13:46:18:489: Thread-13: (DEBUG) [IPT_FileRecMonitorProcessFile] Processing file BTGS-bcRequestIncidentReportv1-rsConfirmIncidentReport-2008Dec15_12_12_12_122-Conversation-Id-READY-2009Jun23_16_37_43_625-1295541858750.xml in transport layer.
    2012.06.06 at 13:46:18:492: Thread-13: (DEBUG) Host name is 'hwspxv006'.
    2012.06.06 at 13:46:18:557: Thread-13: (DEBUG) Host hwspxv006 FTP command: USER gsb2bdA
    2012.06.06 at 13:46:18:559: Thread-13: (DEBUG) FTP Command: USER, reply:
    331 Password required for gsb2bdA.
    2012.06.06 at 13:46:18:561: Thread-13: (DEBUG) Host hwspxv006 FTP command: PASS
    2012.06.06 at 13:46:18:833: Thread-13: (DEBUG) FTP Command: PASS, reply:
    230-Please read the file README-btwlutils.txt230- it was last modified on Wed Jul 1 17:09:58 2009 - 1071 days ago230 User gsb2bdA logged in.
    2012.06.06 at 13:46:18:836: Thread-13: (DEBUG) Host hwspxv006 FTP command: CWD //wls_domains/gsb2b/gsb2bdA/ART/oraclePickupPath/outbound
    2012.06.06 at 13:46:18:840: Thread-13: (DEBUG) FTP Command: CWD, reply:
    250 CWD command successful.
    Thanks

  • TMP files created inside business objects installation folder

    Hi All,
          I noticed TMP files are being inside of business objects folder and it is taking up entire disk space.What is causing this and what can be done to avoid this?
    Thanks.

    there was a service market place note that says do NOT delete this data.
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smp_custmsg/note_index.htm?note_number=0001706286&sap-language=E&p_sid=MjAxMzA0MDMyMzIzMDFTMDAwNTIzODIxMg==&row_num=1&base_url=https%3A//websmp102.sap-ag.de&hashkey=CAEE362677E88779458C84404B570576

  • I cannot fully uninstall iTunes because I am unable to delete the commonfiles\apple folder

    I received error 42404 after updating to itunes 11, and have attempted to follow the instructions at http://support.apple.com/kb/HT1925. However, my Vista will not let me delete the commonfiles\apple folder. How can I delete it?
    The day of iTunes 11's release, I updated my iTunes, then opened up the prgm to take a look at it. I was immediately brought to the attention that the program didn't install correctly (with error 42404), so I uninstalled iTunes and reinstalled it, with the same error coming up. I continued to use iTunes and see if i could ignore the issue, however I discovered I was unable to log into my itunes acount on the store.
    So I followed the isntructions at http://support.apple.com/kb/HT1925 correctly, deleted the remaining files/folders, except I am still unable to delete the C:\Program Files\Common Files\Apple\ folder. I attempt to delete it, it asks me for permission to do so, I say continue, and even after I give it permission to delete the folder, it instantly says to me, "You need permission to perform this action," and it gives me the options to cancel or try again (which immediately brings this same window up again asking me to try again).
    I've done plenty of research for the past two days, from attempting to delete the individual files within this folder via the Command Prompt, using Safe Mode, and many other options, yet nothing works. I've seen many forums advise using a program called "Unlocker," however, anyone googling the program will find that it is offered from a plethora of various sites, and I honestly dont trust programs from these sites.
    Is there ANYTHING anyone knows to do for an issue like this? All I need is that one folder deleted, and all my problems are gone!

    It still didn't work...
    Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
    APLZOD.resources
    BookmarkDAV_client.resources
    CoreDAV.resources
    iCloud.resources
    iCloudServices.resources
    ShellStreams.resources
    Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
    In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
    In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
    In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
    I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
    What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
    thanks!!

  • How to delete the index for the business object BUS0033

    Hi to all experts,
    I'm applying note 1349496 the error here is no records with F4 help for the funds center .
    solution from the note
    Implement the attached program corrections. Then, in the transaction, delete the index for the business object BUS0033, reactivate it, and start the indexing in the indexing mode "Full". The system then displays the data correctly in the F4 search help.
    how to do the second part i have already applied the note .

    any help

  • Unable to delete the meeting invitation from Calendar stored in Public Folder - exchange 2010

    I assume the specific entry (meeting invitation) is corrupted, due to which we are unable to delete the meeting either from outlook or OWA. Is there any possibility to delete that calender invitation from reoccuring? 

    Hi,
    For further troubleshooting, I would like to collect some information
    Is there any error when trying to delete the meeting invitation from calendar?
    If the calendar is not stored in the public folder, is it possible to delete the meeting in this calendar?
    Does this issue occur on one user or multi-users?
    Cancel all meetings in a recurring series
    https://support.office.com/en-za/article/Cancel-all-meetings-in-a-recurring-series-f19821e2-a05b-4f20-b0b8-d69b5a135564
    Please also refer to
    KB 2771436
    Thanks.

  • Can anyone tell me where to download the Business Objects LiveOffice Plugin

    Can anyone tell me where to download the Business Objects LiveOffice Plugin
    Thanks
    Jeff

    Hi Jeff,
    If you have installed Business Objects Enterprise XI R2 on your machine from CD, follow the steps to install the Live Office,
    1. Navigate to the Add-Ons\Live Office folder on the BusinessObjects Enterprise collaterals CD or locate the Live Office setup.exe file on your network.
    2. Double-click setup.exe to launch the Live Office Installation Wizard.
    3. Follow the on-screen instructions in the Live Office Installation Wizard to complete the installation procedure.
    You can also download the collaterals for Business Objects Enterprise XI R2 by logging in the service.sap.com and following the following steps,
    1. Click on the SAP Support Portal link, and then go to Downloads Tab and click on the 'SAP Software Distribution Center'.
    2. In the middle of the page you will get the 'Search for Software' link, click on that link.
    3. In the Search type 'Collaterals' and click search.
    4. You will get the Collaterals for BOBJ Enterprise XI R2 SP2 and SP4 for Windows.
    Hope this resolves your issue.
    Regards,
    Abhijeet T.

  • HT4847 I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do.

    I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do                             

    It still didn't work...
    Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
    APLZOD.resources
    BookmarkDAV_client.resources
    CoreDAV.resources
    iCloud.resources
    iCloudServices.resources
    ShellStreams.resources
    Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
    In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
    In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
    In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
    I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
    What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
    thanks!!

  • Error while generating the Business Object in Mobile Sales

    Hi,
    I made changes to the Business Object BOCAPGEN.
    Now I am trying to generate the business object but it is giving out the error saying
    Error intializing RT Generator !.RT Generator Failed for ".Error arsrep.dat is in use so Generation cannot be done
    I am not a MSA Developer and have no clue regarding MAS(Mobile Application Studio)
    So any one can please give me a clue regarding the issue
    I have solved it by closng all other application other than client console
    Thanks Guys
    Message was edited by: zack taylor

    Hi !
    1 year later, I am facing the same problem.
    I want to build MSA 4.0 SP8, everything runs fines until the end of the generation of the Tiles, the next step fails :
    Error intializing RT Generator !.RT Generator Failed for ".Error arsrep.dat is in use so Generation cannot be done
    Then around 10 thousands of error messages of that kind follow in the output window ; howeverin the end it says "Generation End" without telling whether it was successful or not (the first time the output window was too small, I thought all was OK )
    Anyways, the Mobile Sales icon appeared on the desktop and when I try to launch it I get the error "Starting MobileSalesfailed".
    During another attempt, I check with "Unlocker" the 2 arsrep.dat files I found under the BOL directory, it reported that none was used and locked at that moment.
    Also I killed the vbagen.exe process before starting the build, but it was automatically launched after. (first build was launched after a reboot, the 2nd after the 1st failed + vbagen.exe process killed)
    Does anyone have any clue ?
    Another question is : what are the rights required ? I am a local administrator but I do not have full admin rights (the only thing I saw at the moment is I cannot access to Add/Delete Programs in the Control Panel)
    Thanks & Regards,
    François
    -edit-
    thanks to the one who moved it to the right forum
    Message was edited by:
            Francois Feugier

  • "System: Unable to find the specified object" on N...

    When I go to Control panel->Messaging->Text message" I get the error:- "System: Unable to find the specified object".
    I also can no longer send text messages. Every time I try to send a text message, it asks for the "Centre number" which presumably is the SMS service centre number, but even if I type this in I get an error "Error: Not found".
    I'm sure these 2 issues are related but I'm not sure.
    Please, can someone tell me how to fix this.
    Thanks.

    Hi
    I have the same problem except for that mine is with my nokia 9500. Did you manage to fix your problem? I started getting the same message after I have deleted certain temporary files. I then, also noticed that I do not have access to the internet and the only available option reflected was W*EasyLan
    Please assist if you have managed to fix your problem or can anybody out there assist me PLEASE. Thankx

  • Master Data -- unable to delete the request

    I loaded master data for 0EMPLOYEE info object, all the records Added but the request is in Read,
    I am trying to QM status Green Manually it is giving the message “QM action not allowed for DTP requests in master data and Text Tables “.
    I am unable to delete the request also, when I am trying to delete it is saying
    <b>Error:</b>
    Data inconsistency; Partition /BIC/B0000959000 not deleted
    Message no. RSAR026
    <b>Diagnosis</b>
    In table RSTSODSPART you selected all the requests of a partition to be deleted logically. Some entries partno = 0 still exist in the partition. Therefore the partition is not deleted.
    <b>System Response</b>
    The system outputs an error when deleting the partition.
    <b>Procedure&</b>
    Check the table for data consistency.
    <b>Error:</b>
    Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '      177'
    Message no. RSSTATMAN102

    Hi,
    I have answered to another thread like this one which is still unsolved (I suggested to open the issue in the OSS)
    You can try the following OSS note for a start
    SAP Note 1048161 P14:Set QM status for yellow requests using funcion module
    I've also found a very recent one:
    SAP Note 1078527 P16:Request deletion with error RSSTATMAN 102 in row 34
    hope this helps...
    Olivier.
    Message was edited by:
            Olivier Cora

  • Want to know how to debug the Business Object Method called from CRM

    Hi all,
    I have to debug a Method of a custom Business Object. This is being called when a certain action is performed
    on the CRM  ( CIC0 screen). I can not see an option to set an external break point in the Program of the Business Object
    Method.
    This Business Object calls a standard SAP FM. I tried setting an external break point in that FM and tried executing that.
    But it  is not stopping there.
    Can any one please let me know how I can debug this when triggered from CRM?
    Thanks  in advance.
    Thanks & regards,
    Y Gautham

    Hi,
    I have tried checking the option 'IP MATCHING' option. I have given my user id and also the 'WEBUSER' as well.
    But still I am unable to debug the application.
    Can you please let me know if I am missing anything further.
    Thanks & regards,
    Y Gautham

  • WAS Inst on the NetWeaver 7.2 platform for the Business Objects XI 4.0 SP1

    Hello to all,
    I have tried to install the WAS on the NetWeaver 7.2 platform for the Business Objects XI 4.0 SP1.
    Ok, more preciselly. I have tried to install SP1 for the Business Objects Enterprise XI 4.0. We have had a distributed installation. An application is under the Windows 2k8 R2 platform and the web server (WAS) is under the Unix, where runs the SAP NewWeaver 7.2 CE.
    Installation of the SP1 on the application side has ran just fine. Installation of SP1 under Unix went fine as well till I tried to undeploy the previouse one WAS. At first it could not start, it could not find the java, even the wdeployGUI.sh should use its own java, while it happens. I have edited a profile of the appropriate user for using this "own" java. The same I had to do for the pearl. It ran, but It took a very long time - more than two hours. (We have experience from the base installation, that it supposed to be very quick.) So, I have killed three apropriate processes and wav, undeploying ended successfully.
    Next, I started to deploy a new WAS. But it has been broken several times with the information (from the <INSTALL PATH>/sap_bobj/enterprise_xi40/wdeploy/logs/wdeploy.log), It could not reach the server with the error message: "Error occurred during the action  deployall", "$". I am sure, the acess datas are correct.
    Any ideas?
    I thing there is some problem with the java and pearl settings. But I can not find relevant webappdeploy_unix document for the SP1, so I do not know, why the deploying could not start automatically as in the case of the base (non SP) installation.

    Hi Randy,
    Universe is an important part of the Semantic Layer, whether it is version 3.x or version 4.x of SAP BusinessObjects. In version 4.0 (officially known as BI 4.0), you will be using the new Information Design Tool to build universe. It is highly recommended for all of your presentation tools (i.e. WebI, Crystal, Xcelsius/Dashboard, etc) to go through the new Information Design Tool for data (including BW data).
    The BI 4.0 Virtual Launch is scheduled on Feb 23. I suggest you to sign up at http://virtualevents.sap.com/business-analytics/login.aspx.
    By the way, the SAP BusinessObjects does not have a version 3.2. The most current one is version 3.1. You might be confused with the FixPack which is now up to 3.4.
    Hope this helps.

  • Business Object Installation - Clarification

    Dear All,
    I would like to understand that business objects & Business Intellegence (Latest Version) can be installed on the same server or not.
    Does the Business Objects is a add-on business intellegence ?
    Is IDES Version available for Window & Oracle ?
    Please also share the installation documents & guideline if any .
    Thanks & Regards
    Vimal

    Hi,
    As far as i know you need to have seperate server for BOBJ.
    Please go to help.sap.com and go to business objects and select all products on left corner and filter by BOE and select xi 3.1 and there you will have all the usefull guides you are looking for. If you are planning to report on sap BW data using Business Objects Please go through these blogs by INGO( These are Excellent source for BOBJ WITH SAP INTEGRATION Kit.
    https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/a02d2792-452a-2c10-7c8f-ddd50dad779b [original link is broken]
    https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/20f83c7e-3f2a-2c10-7dbf-a5ec14611a1e [original link is broken]
    Thanks,
    SK.
    Edited by: Vallabhaneni SK on Jul 2, 2009 10:21 AM

  • (model.cpp (4051)) SBL-DAT-00227: Unable to create the Business Service 'EAI Outbound Service'

    Hello,
    I'm self-study integrating Siebel with SOA
    I just set up windown 2003 Siebel 8.1.1.11 (32-bit)
    I start Siebel Server error log file:
    >>>>> InfraEAIOutbound_0021_22020098.log <<<<<
    2021 2014-04-15 11:27:34 0000-00-00 00:00:00 +0700 00000000 001 003f 0001 09 InfraEAIOutbound 22020098 724 4056 C:\Siebel\8.1.1.11.0\ses\siebsrvr\log\InfraEAIOutbound_0021_22020098.log 8.1.1.11 [23030] ENU
    ServerLog    LstnObjInherit    3    000064e0534c0428:0    2014-04-15 110    2014-04-15 11:27:34    Inherited listening object for port 49157
    ServerLog    LstnObjPrivCreate    3    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:27:34    Created port 49170 for EAI Outbound Server
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:27:53    [AUDIT_LOG]: Global audit cache load successful.
    ObjMgrLog    Error    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    (model.cpp (4051)) SBL-DAT-00227: Unable to create the Business Service 'EAI Outbound Service'
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    Object manager error: ([0] Unable to create the Business Service 'EAI Outbound Service'(SBL-DAT-00227) (0x7500e3))
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    Object manager error: ([1] Could not find 'Class' named 'EAI Outbound Service'. This object is inactive or nonexistent.(SBL-DAT-00144) (0x750090))
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    ( (0) err=2818155 sys=7667856) SBL-OMS-00107: Object manager error: ([1] Could not find 'Class' named 'EAI Outbound Service'. This object is inactive or nonexistent.(SBL-DAT-00144) (0x750090))
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    ( (0) err=2818155 sys=7667939) SBL-OMS-00107: Object manager error: ([0] Unable to create the Business Service 'EAI Outbound Service'(SBL-DAT-00227) (0x7500e3))
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    (bsvcmgr.cpp (941) err=2818250 sys=0) SBL-OMS-00202: Error 7667939 loading Business Service "EAI Outbound Service"
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    (bsvcmgr.cpp (1044) err=2818250 sys=0) SBL-OMS-00202: Error 7667939 loading Business Service "EAI Outbound Service"
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    (smimtsrv.cpp (1203) err=2818250 sys=0) SBL-OMS-00202: Error 7667939 loading Business Service "EAI Outbound Service"
    SmiLayerLog    Error    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    Terminate process due to unrecoverable error: 2818250. (Main Thread)
    LOG FILE:
    >>>> SIEBELEVAL.Eval_1.log <<<<<
    2021 2014-04-15 11:27:05 0000-00-00 00:00:00 +0700 00000000 001 003f 0001 09 SiebSrvr 0 2404 2876 C:\Siebel\8.1.1.11.0\ses\siebsrvr\log\SIEBELEVAL.Eval_1.log 8.1.1.11 [23030] ENU
    ServerLog    ServerStartup    1    00006142534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Siebel Enterprise Applications Server is starting up
    ServerLog    LstnObjCreate    1    00006231534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49156 for Business Integration Batch Manager
    ServerLog    LstnObjCreate    1    00006231534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49157 for EAI Outbound Server
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49158 for JMS Receiver
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49159 for Business Integration Manager
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49160 for File System Manager
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49161 for Server Request Processor
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49162 for Siebel Administrator Notification Component
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49163 for Server Request Broker
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49164 for Server Manager
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 2321 for Siebel Connection Broker
    ServerLog    LstnObjCreate    1    00006233534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49165 for Forecast Service Manager
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SRBroker    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    ServerMgr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    ServerMgr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SiebSrvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SiebSrvr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SCBroker    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SrvrSched    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SrvrSched    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    Created multithreaded server process (OS pid =     2800    ) for SRBroker
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    Created server process (OS pid =     2408    ) for SCBroker
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SCBroker    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    SRBroker    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    FSMSrvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    SRProc    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    SvrTblCleanup    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    SvrTaskPersist    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    AdminNotify    STARTING    Component is starting up.
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created multithreaded server process (OS pid =     3404    ) for FSMSrvr
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created multithreaded server process (OS pid =     3796    ) for SRProc
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created server process (OS pid =     3852    ) for SvrTblCleanup
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created server process (OS pid =     3104    ) for SvrTaskPersist
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created multithreaded server process (OS pid =     3876    ) for AdminNotify
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    FSMSrvr    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:15    SRProc    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SvrTblCleanup    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SvrTaskPersist    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    AdminNotify    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeSalesObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeBrokerageObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSConsoleObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    INSeServiceObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeChannelObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeBankingObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeEnrollmentObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SSEObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeCustomerObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MqSeriesAMIRcvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MqSeriesAMIRcvr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    BusIntBatchMgr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SMCObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MSMQRcvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MSMQRcvr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    InfraEAIOutbound    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MqSeriesSrvRcvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MqSeriesSrvRcvr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    JMSReceiver    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    BusIntMgr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    EIM    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    EIM    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    EAIObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    CustomAppObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SMQReceiver    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SMQReceiver    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FcstSvcMgr    STARTING    Component is starting up.
    ServerLog    ServerStarted    1    00006499534c0428:0    2014-04-15 110    2014-04-15 11:27:16    Siebel Application Server is ready and awaiting requests
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    Created server process (OS pid =     2488    ) for FINSObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    Created server process (OS pid =     2540    ) for FINSeSalesObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     3568    ) for FINSeBrokerageObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     2640    ) for FINSConsoleObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     4092    ) for INSeServiceObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     2812    ) for FINSeChannelObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     316    ) for FINSeBankingObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     3068    ) for FINSeEnrollmentObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     2572    ) for SSEObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     2940    ) for FINSeCustomerObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created multithreaded server process (OS pid =     1804    ) for BusIntBatchMgr
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     3288    ) for SMCObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created multithreaded server process (OS pid =     724    ) for InfraEAIOutbound
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created multithreaded server process (OS pid =     2296    ) for JMSReceiver
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created multithreaded server process (OS pid =     2976    ) for BusIntMgr
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created server process (OS pid =     3168    ) for EAIObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created server process (OS pid =     2448    ) for CustomAppObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created multithreaded server process (OS pid =     3080    ) for FcstSvcMgr
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:28    FINSObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:28    FINSeBrokerageObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:28    FINSConsoleObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:33    FINSeSalesObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:33    SSEObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:33    SMCObjMgr_enu    INITIALIZED 

    Hi Experts,
    How to configure and launch the Siebel EAI?
    I'm having problems with url: http://ws811/eai_enu/start.swe?SWECmd=Start&SWEHo=ws811
    HTTP 500 - Internal server error
    Internet Explorer
    And the other url is OK:
    http://ws811/sales_ENU/start.swe?SWECmd=Start&SWEHo=ws811
    Please provide solution the asap.

Maybe you are looking for

  • Block creation of PO when no order is needed

    Hi Expert, Do we able to block PO when the material that we order is sufficient enough, no order is needed. Thanks, Pauline

  • Firewire Audio interface with 4 inputs?

    Hi, as a band we've decided we want to be able to record our drums and bass tracks on one take, then add the other instruments as tracks afterwards. Our drum has 4 mics (bass drum, snare, hi-hat, ride) and the bass we'd plug directly into the interfa

  • Importing mpgs takes longer than it should

    Importing mpgs takes longer than it should. I import 2 hr mpgs on a 6core 32gig ram machine & it takes too long. cs5.52

  • Setting Thread's priority

    What is the best way to use thread's setPriority method? from it's run method using this or when i create its instance or in its constructor (or other)? Thanks, snayit

  • Is a portable firewire drive ok for final cut pro x editing?

    I have heard in the past that the portable drives are not OK as they have no fan and my overheat; however, I am trying to become more flexible and would like a drive I can easily take with me when not working on my desktop.