Unable to deploy the PAR file after the first successfully deploy.

Hi, my gurus.
I found a problem when I developed the JspDynPage.
That is after first deploy the PAR file successfully,I found there is a miss in portalapp.xml, so I correct the miss and then do a second delpoy.But it didn't work.
I goto the Server's file system to find the portalapp.xml,
the content of xml was still the old one.
Anyone can help me, I don't want restart the J2EE Engine,
because the restart will last for 15mintues.
Thanks.

Hi,
I dont think there is no need to restart your J2EE Engine.
Becuase i dont think you have a requirement to create an iview from that PAR File
If it is so delete the previous iview and create a new iview.
From the updated PAR File in ur System
Every Time when you uplaod the PAR the old instance will be lost.and new changes will come into effect on each upload done by you.
There is no question of restarting ur J2EE Engine.
Whenever there is a change in you PAR.
Hope this Helps you.
Thanks & Regards,
Lokesh.
Reward Points if helpfull

Similar Messages

How do i transfer a compilation photo file from iPhoto consisting of canon(img) and lumix(p..) in the order i compiled them to a usb stick as at the moment it is putting all the lumix files after the canon files?

I have a macbook pro 15 inch retina 16 gb 1600mhz 2.7intel i7 osx 10.8.5
I have just put together an iPhoto file of wedding photos consisting of a compilation of images from my canon(img files) and lumix(p..files) I want to know how to transfer them to a usb stick in the order i compiled them as at the moment it is putting all the lumix files after the canon files which is not how i want to present them to the newlyweds?

Files are ordered by the file-viewer being used. What viewer are you using, and what data field are you sorting by?
In Finder, as in most applications, you can select the data field to sort by clicking a column header. Clicking the selected header will reverse the sort.
This is the Aperture forum, but what applies to Aperture is likely also true for iPhoto: if you want to be able to sort your files in a specific order in a file-viewer, you should give them names that allow for sorting in that order when the name field is selected as the data field to sort by. In Aperture, one creates new files by exporting, and one uses a File Naming Preset to name the files. The File Naming Preset can start with an ordinal count or a sequence number. Either of which will allow you to retain your order when viewing your files in a file viewer.

Issue while uploading the PAR file thru system admin- AdministrationConsole

Hi All,
I have downloaded the PAR file "com.sap.portal.navigation.lightdetailednavigationtree.par.bak" from system admin->support->Portal Runtime ->browse deployment->Web-Inf->deployment->PCD.
after downloaded to the desktop for manual change in one of the JSP file rather than importing into NWDS. I have removed the bak from the file and added the .Zip to the file and i extracted the file.
here inside i got the three folders i.e WEB-INF,PORTAL-INF and file_list. now i went to jsp file called "LightDetailedNavigationTree.JSP" , changed one small property value in the code from false to true. after that i again zip the folders strcuture make the file name as original in the form of .PAR file. now i am trying to upload it in the portal thru system admin->portal runtime->administration console, but i am getting the deployment error as mentioned in the below.
even though with error, the wrong version of the par file with extension .err was saved in the PCD folder strcture, and original file also still exists. now i wanted to remove the wrong version of the file from PCD, what is the procedure to delete the wrong version, here in administration console i found one button clean , but i could not able to locate the wrong file version , only original right version showing up in the clean dropdown??
Can u tell me what is the procedure to edit the PAR file manually after downloaded to the desktop, rather than going edit thru NWDS??
if we need to upload the PAR file after changes, do we need to delete the original PAR file before we upload the new version of the same PAR or it will be automatically overwrite the original file with the same name??
Still i am getting confusion, please let me know how to edit the PAR file manally and how to upload the PAR file with out any isse while uploading it in the portal thru system admin->administration console??
Any pointers in this regard would be the great help to me??
Error as i got while uploading the par file after the changes manually. (com.sap.portal.navigation.lightdetailednavigationtree.par)
2011-01-24_07-40-18
Application upload failed: com.sap.portal.navigation.lightdetailednavigationtree.par
java.util.zip.ZipException: Error opening zip file /usr/sap/BIS/DVEBMGS13/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/com.sap.portal.navigation.lightdetailednavigationtree.par
*     at java.util.zip.ZipFile.open(Native Method)*
*     at java.util.zip.ZipFile.<init>(ZipFile.java:140)*
*     at java.util.zip.ZipFile.<init>(ZipFile.java:155)*
*     at com.sapportals.portal.prt.deployment.ArchiveIterator.iterate(ArchiveIterator.java:39)*
*     at com.sapportals.portal.prt.deployment.UploadProcess.upload(UploadProcess.java:60)*
*     at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:835)*
*     at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchive(DeploymentManager.java:474)*
*     at com.sapportals.portal.prt.deployment.DeploymentManager.uploadApplication(DeploymentManager.java:319)*
*     at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doUpload(ArchiveUploader.java:116)*
*     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
*     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)*
*     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)*
*     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)*
*     at java.lang.reflect.Method.invoke(Method.java:391)*
*     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:706)*
*     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)*
*     at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:249)*
*     at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)*
*     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)*
*     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)*
*     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)*
*     at java.security.AccessController.doPrivileged(AccessController.java:246)*
*     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
*     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
*     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)*
*     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)*
*     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)*
*     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)*
*     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)*
*     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)*
*     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)*
*     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)*
*     at java.security.AccessController.doPrivileged(AccessController.java:219)*
*     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)*
*     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)*
Can you please what are the steps if any specific while editing the PAR file manually and uploading it with out any issues??
Thanks in advance.
Regards,
PortalUser
Edited by: PortalUser100 on Jan 24, 2011 6:01 PM
Edited by: PortalUser100 on Jan 24, 2011 6:04 PM
Edited by: PortalUser100 on Jan 24, 2011 6:05 PM

Hi Shusil,
Thanks for your reply.
I have one more dought here.
the PAR file of lightdetailnavigation has been modified thru NWDS and deployed the PAR file by adding the required JARS.
Now my question is, the application server which i am used as local portal server installed in my desktop.
now this depoyed latest par file i have picked it from the workspace in the local desktop, and i am planning to upload the same PAR file in of the sandbox portal system of client , will it update successfully in the new portal apart from the deployed portal??
i am here used the path system admin->support->portal runtime -> administrate console ( this in the sand box system to upload the par file which was deployed in the local portal server in my desktop.
Thanks,
Portal user

Unable to Deploy Par File in the Portal

Hi Experts,
When i'm trying to deploy the par file to the portal after Configuring the server settings it's giving me an error.
"Operation Failed: Please make sure the server 'DEV' (hostname:port) is running or check the log (sap-plugin.log) for more detail "
And please guide me where i can find the log file sap-pluginng to check the logs as i'm new to the NWDS i'm not able to locate the file.
Regards,
Nilesh

Dear Nilesh,
Check that you have set the followings configurations:
- Windows -> Preferences -> SAP J2EE Engine:
Message Server host: Portal Server
Message Server port: ms of portal 390x (not 50x00) you cand find your message server port in http://server:port/index.html -> System Information (Message server table)
- Windows -> Preferencies -> Sap Enterprise Portal (there you need to put the 50x00 port).
Try with this a comment, regards.

Problems with the par file of Browse Deployment

Hi,
I had an error message with the com.sap.portal.support.browse.default in Browse deployment, that this iView is not found.
Fortunately I had a file with the same name, so I uploaded it, but it was the wrong one (Why do they all have the same file name?). I uploaded the par file of the masthead, so every time i click on the browse deployment link I get the masthead and now I have no chance to download other par files.
Do I still have the right iView on the Server or in the Portal? If yes, where? Or can anybody send me the right par file?
e-Mail: Ulli_Arndt(at)gmx.de
Thanks in advance!
greetings,
Ulrike

Hello Ulrike,
Most companies use different servers for development and Production. The Browse Deployment Option should be used only with the development server. If you're going to use it with the Production server, there could be problems, as the two servers have a different architecture.
Once you sign in to the DEVELOPMENT SERVER using your user id, ensure that you have the Systems Administration Role and click on the tab corresponding to the same.
Then select Support.
Select Portal Runtime.
Select Browse Deployment.
Once you do this, you'll see a filepath on top of the page just below the top level navigation area. Here's where most people commonly make a mistake.
Ensure that the breadcrumb is EXACTLy as follows:
ROOT/WEB-INF/deployment/temp
If this is not the case, clcik on ROOT in the filepath displayed on your screen and navigate along the filepath above so you reach the correct iView.
You should now see a list of files with the extension .par.bak.
Upon downloading any of these files, the downloaded .rar file for most of the files with have the same filename. Once you unzip this file once or twice, you'll get a .par.bak file with the same filename as the one you downloaded. Rename the extracted .par.bak file by removing the .bak extension. You'll be left with a .par extension now.
You can now import this file in NWDS and work on it as required.
I hope this helps. Let me know if you have anyfurther questions. Screenshots are alsways helpful, especially of the filepath on the top of your screen.
Regards,
Farsheed

Why is the PAR file located in portalapps, pcd and temp folders???

Hi all - I downloaded the com.sap.portal.runtime.logon.par.bak file to make changes to the logon page. I renamed the PAR file after it was downloaded, made my changes, and exported back into the portal. Everything is fine....I just have a question in terms of what the difference is between what appears to be 3 locations where this file is located. First, it appears that the file I exported is now located at:
ROOT/WEB-INF/portal/portalapps (timestamp 10:25:22 AM)
However, there are backup versions (.bak) located in the following locations;
ROOT/WEB-INF/deployment/pcd (timestamp 10:24:46 AM)
ROOT/WEB-INF/deployment/temp (timestamp 10:25:06 AM)
It appears as though the file is loaded into pcd, then to temp, and then to portalapps? What exactly is it doing, and why are there 2 backup files?
Regards,
Steve

I understand the problem. Here are some ideas:
1) Permission repair only affects files in the system, userfiles are ignored.
2) For large file transfer, you must be hardwired. Wi-Fi is insufficient for transferring large files.
3) When copying Mac files to a Windows filesystem, illegal characters in a filename will cause the operation to stop without any informational error message. In any case, copying large files to a Windows machine is not very reliable. I recommend Mac-formatted network storage.
4) When attempting to mount a nonexistent network disk, Finder stalls with a 5 minute timeout. The solution is to add a "Quit Finder" menu item to the Finder icon in the Dock.
5) If the machine uses a dynamic localnet address, Finder is unable to locate an aliased network disk that has changed. You need to mount the disk with the "Connect to Server" dialog first to fix the aliase(s). A DNS setup may help to locate machines by hostname rather than IP address.
6) Switches are problematic. If you are using switches rather than routers you may be seeing congestion on machines connected to the switch.
7) I highly recommend rsync triggered by a cronjob running in the wee hours of the morning. rsync is robust and persistent in file copying.

Not able to view the uploaded PAR file in the portal archive selection.

Dear All,
I have modified com.sap.portal.runtime.logon.par and have renamed it to some other name.
Now I have uploaded the par file.
The problem is that when choose new from PAR option (to create iview from a par file),I am not able to see the par file in the Portal Archive selection.
I also want to know that if I am able to call the par file in the iview, can I use this iview to have a portal login.
Our requirement is that we want to give login page for the portal in the portal home page.The portal home page will be for the anonymous users.
Kindly try to guide me

Hi Nitin,
Check ur Portalapp.xml file. If u have the following code in that just <b>remove</b> them
<property name="com.sap.portal.pcm.Category" value="platform">
<property name="inheritance" value="final"/>
Deploy it again.now u can see that par in ur portal.Refer this thread also
PAR File not seen
Regards,
Tamil K

The PCD folder with all par files in the portal is empty

Hi all gurus.
I have a customer that failed with a transport of iviews between two portals, the par file was not included even if attribute "include dependent objects" was checked.
I have met this problem before and the only(?) solution is to download the par file separately and import it into the receiving portal and then create a new iview from it.
Here is my problem: when I at this certain customers portal go to "System Administration > Support > Support Desk > Portal Runtime > Test and Configuration Tools > Browse Deployment" and then browse to "Root > WEB-INF > deployment > pcd" that last folder is empty! Blank!!!
On all portals I've seen that folder alwasys shows all standard par files along with deployed stuff but here the folder just shows a white page with the text "The folder is empty".
I don't think it's a matter of authority since I have added "super-admin role" and all possible content admin roles to my user without any change, the folder is still empty.
Does anyone have an idear about what is going on here?
Best regards
Benny Lange

Hi Raghu.
Your are missing my point: it's not about what content to export, it's about the folder being totally empty. I can't see the par files belonging to our deployed code either.
Of course I could upload the par file from Eclipse workbench from where I first uploaded the par file to the development enivironment, but I find it alarming that the folder is empty when it's full of par files in every single portal I have seen so far.
Best regards
Benny

Where to get the par file for visual composer application?

Hi Gurus,
I have referred few forum postings about transporting VC iview .
to do that first we have to deploy the par file of the Visual composer application into the target system(QA & Prod) where ever we want to import it........
Now my query is I went to System admin->support-Portal runtime->Root Folder-->Portal apps........
where i have seen my Visual composer application name and otpion to download when I downloeded it it has downloded in unknown format............can i deploy this to SDM of the target system?
Or I need to change the file format into par or par.bak file?
please tell me how to go about it.........
higher points will be rewarded for the useful inputs.......
Thanks in Advance,
Dharani

Hi Dharani,
Tools --> Options --> Compiler --> Check box deploy for par and mention the namespace and vendorname in the PAR prefix name
Very similar to how its done in NWDS.
Cheers,
Rahul.

Error while uploading the PAR file of Production to UAT-

Hi Experts,
Could you please help me out in resolving the error which i'm facing while uploading the PAR file.
1. I have downloaded the par file from the production, imported to my NWDS.
2. Made changes to my HeadiView.jsp
3. I want to test my implementation in UAT.So i have uploaded the PAR to UAT system.
4. Below is the error i'm getting from the Log trace.
#1.#D27E2000F002008200000020000BD0FE0004436CD4EBF6C2#1200034614604#com.sap.porta
l.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#BVISHALA#17971##adcapsap18.
uk_QP0_16441150#BVISHALA#5d8f9460c01111dcafa2d27e2000f002#Thread[PRT-Async 2,5,P
RT-Async]##0#0#Error##Java###06:56_11/01/08_16441150
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in in
it method
Component : com.tw.navigation.Masthead.HeaderiView
        at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
lComponentContext.java:251)
        at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refr
esh(PortalComponentContextItem.java:271)
        at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getC
ontext(PortalComponentContextItem.java:316)
        at com.sapportals.portal.prt.component.PortalComponentRequest.getCompone
ntContext(PortalComponentRequest.java:387)
        at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.j
ava:443)
        at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391
        at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.j
ava:233)
        at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:6
36)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
nt(AbstractPortalComponent.java:388)
        at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:816
        at com.sapportals.portal.prt.component.CachablePortalComponent.handleEve
nt(CachablePortalComponent.java:703)
        at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
.java:252)
        at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
ava:368)
        at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
java:340)
        at com.sapportals.portal.navigation.PortalLauncher.doOnNodeReady(PortalL
auncher.java:318)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
nt(AbstractPortalComponent.java:388)
        at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
.java:252)
        at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
ava:368)
        at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
java:340)
        at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(P
ortalRequestManager.java:642)
        at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(
ServletConnection.java:240)
        at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatc
her.java:524)
        at java.security.AccessController.doPrivileged(AccessController.java:242
        at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.ja
va:407)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.se
rvice(InvokerServlet.java:156)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
Impl.doWork(RequestDispatcherImpl.java:321)
        at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
Impl.forward(RequestDispatcherImpl.java:377)
        at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServle
t(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReq
uest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
t(RequestAnalizer.java:387)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
t(RequestAnalizer.java:365)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebCo
ntainer(RequestAnalizer.java:944)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(Requ
estAnalizer.java:266)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:9
5)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor
.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSes
sionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRu
nner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:3
7)
        at java.security.AccessController.doPrivileged(AccessController.java:215
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.ja
va:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:1
70)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationExc
eption: Could not instantiate implementation class com.btexx.pct.easyWCM.navigat
ion.masthead.HeaderiView of Portal Component com.tw.navigation.Masthead.HeaderiV
iew because: Could not find implementation class
        at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
stanceInternal(PortalComponentItemFacade.java:242)
        at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getCo
mponentInstance(PortalComponentItemFacade.java:160)
        at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponen
tInstance(PortalComponentItem.java:732)
        at com.sapportals.portal.prt.component.PortalComponentContext.getCompone
nt(PortalComponentContext.java:103)
        at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
lComponentContext.java:242)
        ... 44 more
Caused by: java.lang.ClassNotFoundException: com.btexx.pct.easyWCM.navigation.ma
sthead.HeaderiView
        at java.lang.Class.forNameImpl(Native Method)
        at java.lang.Class.forName(Class.java:152)
        at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
stanceInternal(PortalComponentItemFacade.java:228)
        ... 48 more
Kindly help me to resolve this issue.
Many Thanks,
B.Vishali.

Hi,
The problem might be caused by the version inconsistency of your J2EE and Portal Platform.
Please check the version of your J2EE and Portal.
Best Regards,
Assaf

Unable to find par file in the list in EP 7.0 when i export form NWDS

Hi All,
Can any one help me regarding that.
i upload one par file through NWDS by using export.after that when i going to create one iview from par.in the PAR list my par file is not display.
but the par file is avilable is the PCD.
can any one suggest me regarding this issue.
thanks & regards
chitta ranjan bej
portal devloper
EDS-Gems

Hi,
go to System Administration -->Support --> Browse Deployment and browse to the directory ROOT/WEB-INF/deployment/temp
locate the corresponding par file and Download it to your local system. If you observe the file extension, it is "bak", because SAP Portal renames the archives after it deployes the par so that it will not deploy it again. Remove the file extension .bak and rename according to the naming standards of your organization. I would recommend you to use the same naming of the file, remove "sap" and use your own company name, like com.mycompany.portal.navigation.masthead.par.
After this, you can import this par file in NWDS (Netweaver Developer Studio) by selecting File --> Import.
A word of caution, the importing does not import the jar files in the private/lib folder of the project structure. So, copy them manually to the new project you have created.
When you see the project structure, you can find the related file in dist --> PORTAL-INF -->jsp -->
You can change this file according to your needs and deploy it back to the portal.
create the ivew from par
hope it works for you
gunjan

Error while deploying the par file

while deploying an application in NWDS we are getting the error as"operation failed,please make sure that the server is running or check the log."
we have ensured that the server is running,but the deployment is getting failed.
Please suggest tips to deploy the PAR file successfully.
Thanks.

Hi,
We are using NWDS to create a small application to develop ( for ex jspdynpage)
.while deploying the par file or exporting it to the server,we are getting the error as "please make sure that the server running.HTTPS protocol is not supported,please ensure that this server is not using HTTPS.
the server is running and is shown in green.
we have also disabled the proxy settings.
we have also tried by specifiing the IP of the server in the proxy settings.
the above steps didnt work.please suggest the things to do to make this working.
thanks,
rajani.

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

After updating silverlight, i'm unable to open any pdf files in the system

After updating silverlight, i'm unable to open any pdf files in the system

According to your User Agent you posted this question using Internet Explorer 11 on Windows 8.1. Are you having a problem with Firefox? What Firefox version?
You said you are having a problem opening PDF files on your system. Can you explain that better? Mozilla Support can help you with opening PDF files in Firefox, which uses a built-in PDF reader. Maybe one of these articles will help?
* [[View PDF files in Firefox without downloading them]]
* [[How to disable the built-in PDF viewer and use another viewer]]

Deploying the par file

Hello experts...
Can any body have the step by step process for how to deply the par files?
please let me know if you have any weblogs?
Thanks
padma

Hi,
If you have sys admin privileges go to
Sys Admin --> Support --> Portal Runtime --> Administration Console and choose ARchive deployer
If you have java developer role assigned then you can do it from Java Development tab.
From web dynpro
http://help.sap.com/saphelp_nw04/helpdata/en/68/f64942da51690de10000000a155106/frameset.htm
Hope this helps,
Thanks,
Praveen
PS.Dont forget to reward points

Unable to deploy the PAR file after the first successfully deploy.

Similar Messages

Maybe you are looking for