Unable to edit or display DSO

Hi,
When I edit or display DSO, Dump is generated with a runtime error- Description error as
Syntax error in program "CL_RSAR_PSA===================CP ".
The current ABAP program "CL_RSD_ODSO_VERS==============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Kindly let me know if something can be done.
Thanks.
Edited by: SAPBILearner on Jan 25, 2010 10:45 PM

If you are talking about production then you might not have authorisations for SE14.
did u tried to open the PSA and see the data in the PSA. if you are not able to do this please run the below the program
Try to run program RSAR_PSA_CLEANUP_DIRECTORY from SE38, by selecting following
Persistent staging Area Radiobutton 'ON'
Repair check box 'ON'
Only Active PSA check box 'ON'
login into the system go to su53 transction the authrisation check will be succesfull. then try to open the dso again then go and check in su53 if there is any authorisation failure.
Are you able to open the same DSO in any other systems like dev and quality...If yes, then try to send a transport request by activating the DSO and the transformation and the data source.I hope this will work fine.
Regards,
Vikram

Similar Messages

Unable to edit the document in sharepoint2010

Hi,
I am unable to edit the document in sharepoint2010 with IE-10 while editing i am getting the error like
"The form cannot be displayed in the browser because the use of session cookies has been disabled in the current browser settings.In order to load the form the session cookies must be allowed."
Please suggest me on this.
Thanks in advance.
Regards
SidduSekhar

Hi SidduSekhar,
Based on your description, I need to verify the things below:
Which browser did you use? Did this issue occur with all the browsers?
Is the cookie disabled in the browser? If yes, please enable it.
Did you implement security fix in the web.config, such as <httpCookies requireSSL="true" httpOnlyCookies="true" />? If yes, please set it to false in web.config.
Did you configure Alternate Access Mapping for SharePoint with a URL containing a “_” character? If yes, please remove the “_” from the URL.
More references:
http://blogit.create.pt/miguelisidoro/2013/12/01/sharepoint-and-the-form-cannot-be-displayed-in-the-browser-because-the-use-of-session-cookies-error/
https://prasantabarik.wordpress.com/2014/05/03/sharepoint-2010-workflow-task-error/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Unable to Edit any event in iCal

I am unable to edit any event in I cal, the only options I have available to me is to accept or decline the event, Help

Ok cool, I have changed the time displayed to Military 24H in Time and Date setting ... while keeping my International region to Canada ... and iCAl still seems to be working well! Great!
Again thank you very much! I have recently transitioned from WIN to MAC and this was making me crazy!
- a.

Unable to edit the form in Personal Change Request

Hi,
One of the manager is trying to edit the employees information. When he navigates to edit form of personal change request, under My Crew tab of Manager Self Service in portal, unable to edit the information but he is able to add notes. in the form.
In detail, the manager is trying to assign new manager to an employee under him(moving an employee to differen team headed by different manager so trying to replace his name in the employee's informaton). The manage is unable to change the information or unable to edit any information in the form "request for change in position/transfer"
Could someone help me on this.
Thanks in advance.
Regards,
Ravi.
Edited by: Ravi Alla on Jun 17, 2010 9:15 PM

Hi,
The issue is resolved. This is because of Acrobat JavaScript option disabled in display preferences of the form.
Once this checkbox is enabled its working fine.
Regards,
Ravi.

Unable to edit default permission for Screen capturing of BB 8800 curve after downgrade OS to 4.3

i have downgrade my BB 8800 device OS to 4.3 , and its OS version is v4.3.1.27 (Platform 2.7.0.30) Cryptographic kernel v3.8.5.30 , So exact problem is like that now i am unable to edit the default permission for Screen Capturing properties of device, it shown the only option "Deny" and dont allow to me change it . For that i go to - Option->Security Options->Application Permissions->option button->Edit Default permissions->Interaction->Screen Capturing and it show only option "Deny" - So please suggest a solution

Greetings, welcome to the Forums.
There's lots of detail you left out...
There is no OS 4.3 for the 8800 model. So, what model BlackBerry do you have, found at Options > About?
What is your Operating System loaded to your device? Look at Options > About, third line down beginning with a "v.5.0.x.xxx", What is yours?
What screencapture application are you using?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

KM HTML Editor unable to edit

Hi,
I am having a weird situation where I am unable to edit the HTML editor in the XML Form. Rest all controls like (Textfields, etc) are working.
Only the HTML editor control is not editable.
Can anyone give me any solution on this.
Regards,
Narendra.

Please see SAP Note 1840665 - HTML Editor in XMLForms is not displayed
I had a similar issue to what you described and the solution provided in this note corrected it. If this is not the same issue you are facing, please provide more details, as I have a good bit of experience with KM issues.
Hope this helps,
Trent

"X-Server Unable to connect with Display :0..."

When i rebooted my Solaris 8 Server, i am unabel to get my login screen. It displays a message like "Ther X-Server Unable to connect with DISPLAY :0...". Can anybody tell me how to rectify this problem.

Hi Kanstantin,
Ieve tested the database connectivity through sqlplus using SYSTEM. But when I try to connect (Mount the repositiry server from MDM console, I facing the problem mentioned.
Please let me know if I need to do anything else.
For your info:
The following are the tnsnames entries
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
MD7 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = mysapplm)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = MD7)
      (INSTANCE_NAME = MD7)
      (GLOBAL_NAME = MD7)
    (HS = OK)
The following are the entries in listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = I:\oracle\MD7\102)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = mysapplm)(PORT = 1521))
Regrads,
Varadhu
Edited by: Varadhu on Aug 6, 2009 10:49 AM

Unable to edit zcsa/installed_languages

Hi,
I am performing language configuration in a newly installed ECC6.0 IDES system.
in RZ11 I can find the entry zcsa/installed_languages in aread only mode but in RZ10 this entry I cant find.So, I am unable to edit the parameter.
Can any one help me regarding this?( How to edit the value of this parameter in RZ10)
Regards,
Moulinath

I had the same problem. Saw this unsolved thread. So thought I would clear it up since I found what I was doing wrong. May be this is a well known thing in BASIS. I am an ABAP guy who had to end up doing some BASIS .
RZ11 displays individual parameters and RZ10 displays/updates profiles which contain such parameter.
To understand the difference - Use F4 help->Choose a profile->GoTo->Profile Values->Of a server->Choose server->Here you will find all the parameters which can be displayed in RZ11. My 2 cents.
Regards,
Shravan

Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.

thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms.

I am unable to edit an image in Photoshop.

I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

Chris:
I have to apologize for being misleading on my request for help in
resolving the problem.
Actually the version I am using is CS2 not CS3.
Yesterday I tried numerous times, and ways, to edit an image and each time
it refused to allow me to save it.
The software program just shut down. This evening when I decided to give it
another try it worked perfect.
Guess the program just took the day off.
Thank you for offering to help
Regards,
Doug

Function Module "RSDRD_SEL_DELETION" / Unable to edit selection

Dear experts,
I am currently working on FM "RSDRD_SEL_DELETION". I am testing it in SE37.
However, when I try to enter selection I_THX_SEL, it tells me:
Unable to edit the object
Message no. MO704
Diagnosis
You tried to edit an object that cannot currently be edited using the editor for complex objects. Possible causes:
The object is an object reference
The object is a hashed table
The object list a string
The object has the type REF TO DATA
The object contains object references
The object contains hashed tables
The object is a string
The object contains strings
A subcomponent of the object has a width that exceeds 65,000 characters.
Can anyone tell me how to make it work?

Sorry! The code was meant only as example, as I would convert it. The names of the infoObjects are naturally differently. It concerns to me rather the understanding whether the data records are deleted individually in each case. Or all those the conditions of <b>NUMBER</b> fulfill and all those the conditions of <b>DATE</b> fulfill. I would like to delete however only the data records, which fulfill these conditions together.

WebElements - Unable to edit WEPlatform

Hi,
I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
Any help will be great.
Cheers,
Matt

hi Matt,
the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you build a new report using webelements you don't have to keep changing the platform function each time.
jamie

User unable to edit contacts

I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
Do you want to save a copy of this item in the default folder for the item?
I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
No other users report the problem, and loading the users account on another computer demonstrates the same problem.
Any ideas what I am missing?

Hi,
The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
Add-MailboxPermission -Identity "xxx" -Owner "xxx"
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Unable to edit

I am a complete novice to Dreamweaver so please bear with me.
I am trying to edit some pages (.php files) for my employer. I was
able to edit the index.php file but none of the others. All of the
html code is greyed out except certain areas and unfortunately, the
part I need to change is greyed out. I am completely unable to edit
any of the greyed areas. I've looked all over to see if there's a
way to unlock the code but I can't see anything. Does anyone have
any suggestions?

If you do not have the associated Template file, it *MAY* be
a trivial
matter to recreate it. We would need to see the code on the
page to know
whether that's possible, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:gecgtk$4g2$[email protected]..
> This sounds as though the page has been made form a
Dreamweaver template.
> Do you have a template folder in the site root folder at
all with a file
> named .dwt in it?
>
> You can unlock the greyed out area of a page by opening
it and
> going>Modify>Templates>Detach Template.
WARNING! WARNING! Doing this may
> help you in the short term but once detached if anyone
updates the
> original .dwt template file the changes WILL NOT
propagate to those pages
> that have been detached from the template.
>
> First look for the .dwt file. It should be in the site
root folder in a
> folder named Templates. Open it if you can find it and
make the changes
> there. All changes made, once saved, will propagate to
all pages in the
> site made from the template.
>
>
>
> gwnyvere wrote:
>> I am a complete novice to Dreamweaver so please bear
with me. I am
>> trying to edit some pages (.php files) for my
employer. I was able to
>> edit the index.php file but none of the others. All
of the html code is
>> greyed out except certain areas and unfortunately,
the part I need to
>> change is greyed out. I am completely unable to edit
any of the greyed
>> areas. I've looked all over to see if there's a way
to unlock the code
>> but I can't see anything. Does anyone have any
suggestions?
>>

Unable to edit or display DSO

Similar Messages

Maybe you are looking for