Unable to establish any ssl connection

Since my last update im not able to load any ssl webpage from my system.
If i try with curl or wget, i get various SSL errors like
"OpenSSL: error:0407006A:rsa routines: RSA_padding_check_PKCS1_type_1:block type is not 01"
"OpenSSL: error:04067072:rsa routines:RSA_EAY_PUBLIC_DECRYPT:padding check failed"
"OpenSSL: error:1408D07B:SSL routines:SSL3_GET_KEY_EXCHANGE:bad signature"
"Read error at byte xxx (error:1408F119:SSL routines:SSL3_GET_RECORD:decryption failed or bad record mac)."
Im using a d-link DWA-131 (r8712u module). The problem does not appear when using the wired interface. Windows 7 has no problem with the wireless dongle too.
Could anyone point me in the right direction for finding a solution to this?

This seems to be an issue with the r8712u driver (https://bugzilla.kernel.org/show_bug.cgi?id=45071) which was not happening before. Ill keep the thread updated.
Last edited by honzor (2012-09-10 16:22:52)

Similar Messages

I am unable to establish a VPN connection. My certificates are installed, but I receive error : ssl_error_bad_mac_read

After installing SSL Certificates into the browser, I attempt to load the site and receive the following error: ssl_error_bad_mac_read

greg85740 wrote:
I just bought a new IBook Pro to replace an old unit.
I assume you mean a new MacBook Pro correct? From Apple, a brand new machine, not a recently bought older model Mac?
I loaded Microsoft 2008 office.
Some reports of issues "fresh installing" Office 2008 on a Lion (OS X 10.7) equipped Mac (all new ones have this)
http://roaringapps.com/app:2533
I am getting an error
“Unable to establish a secure connection to pop-sbc.mail.am0.yahoodns.net because the correct root certificate is not established”
Could be a issue with yahoo, or your ISP, or your new machine.
I would try again later and see if the issue clears itself up. Make sure your computer is updated via Software Update, this should give you the updated root system certificates.
Also head over to Keycahin Access>Preferences then Certificates and set Best Attempt, Best Attempt and Require Both for the three settings. This will make sure your certificates are well checked before using.
If your using a older machine, like 10.5, then there are no longer any root certificate updates from Apple.
I have all the same settings as my old Mac which worked fine but the new computer is giving me this error.
So it works fine on the older machine and not the newer.
Well it could be that becaue you installed Office 2008 (same license) on another machine that there are security issues at play to prevent a cloned machine from intercepting emails.

I can no longer access facebook from my macair and when i try the following error message appears "unable to establish a secure connection to the server.

I have had no issue accessing Facebook in the past using my MacAir. Last night each time I would try and access the page, an error message would appear, saying that unable to establish a secure connection to the server "www.facebook.com"". The problem continues this morning. I have not updated any software or made any changes. One minute it was working, the next it was not. I do not have any parental controls; I have deleted the cookies; and I have reset safari. I can access all other websites that I have tried. I am using Version 6.0.4.

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Now open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If nothing above helped, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, restart your internet modem and router. Then quit and relaunch Safari and try Facebook.

Poor performance in establishing an SSL connection

Hi,
i have a Servlet (loaded on Tomcat 4.1) that establishes a SSL Connection to a remote server. The issue is, is that the connection phase takes over 4 seconds to complete!
heres the function where the problem shows
public SSLSocket getSocket()
throws NoSuchAlgorithmException, KeyStoreException, FileNotFoundException,
IOException, KeyManagementException, CertificateException,
UnrecoverableKeyException
* Set up a key manager for client authentication if asked by the server.
SSLSocketFactory factory = null;
SSLContext ctx;
KeyManagerFactory kmf;
KeyStore ks;
// Set the SSL Context to TLS (required for Client certs).
ctx = SSLContext.getInstance("TLS");
kmf = KeyManagerFactory.getInstance("SunX509");
ks = KeyStore.getInstance(ksType);
// Load in the KeyStore.
ks.load(new FileInputStream(ksLoc), ksPassphrase);
kmf.init(ks, ksPassphrase);
// Generate some random data.
SecureRandom sr = new SecureRandom();
sr.nextInt();
// Initialise the SSL with the random data.
ctx.init(kmf.getKeyManagers(), null, sr);
factory = ctx.getSocketFactory();
* Open the Socket to the SSL server. from this point we can treat
* it like and nomal Socket
SSLSocket socket = (SSLSocket)factory.createSocket(servHost, servPort);
// Force the handshake
socket.startHandshake();
// Return the now open SSLSocket to the caller.
return socket;
the problematic line is:
SSLSocket socket = (SSLSocket)factory.createSocket(servHost, servPort);
it takes about 4.5 - 5.0 seconds to return. The remote server is based on the same LAN as this Servlet and so network lag should not be an issue (im accessing via 10.xx ip too)
Can anyone help me in determining why this takes so long?
Thanks !
Darren.

First, try by removing the line which says:
socket.startHandshake();because the handshake will be initiated by the socket upon creation.
If you are using JDK v1.4.1 I've seen some SSL performance issues when stablishing the connection, so I returned to my old JDK 1.3.1.
Also be sure to create the factory in the servlet init() method because it has no sense to recreate the factory in every request as long as it uses the same KeyManager.
HTH

Why am I getting an error "Unable to establish a secure connection with (mail server)"? And what can I do?

I'm trying to set up email on my Firefox OS Flame (OS is Boot2Gecko 2.0.0.0-prerelease) and getting an error:
Unable to establish a secure connection with mail.velociraptor.info
I'm on Dreamhost, the certificate belongs to `*.dreamhost.com` but I'm not even sure this is a certificate error, and if it is, how I'd go about fixing it. I found the Certificate Manger, but I don't know how to download the certificate and add it, and I don't know if this is even the problem.

If this is a self-signed certificate or one where the CA is not trusted on FFOS, you will get this error.
There is currently no proper user interface for adding certificates. You could have a look at the method described at this page: http://www.pending.io/add-cacert-root-certificate-to-firefox-os/
There are also several bugs open regarding this problem, e.g. https://bugzilla.mozilla.org/show_bug.cgi?id=874346. They have additional information that could help you to find out, if this is the problem you are seeing.

"Safari is unable to establish a secure connection"

When I try to log in to bank or credit card accounts Safari will frequently display the above error. It resolves when I restart my computer, but only temporarily. Sometimes the error displays after I'm already logged in to an account and trying to make transfers/payments/etc.
Has anyone else had this problem and/or found a solution?

Hello B Noir,
Thank you for your suggestion. I did check the date, time and time zone and they are correct. I also was able to open the iTunes Store without any trouble. I actually had trouble getting back to this page, because I was getting the error message trying to open it, and had to reboot to reply to you. I realize that I didn't give any detail except to say it sounded like exactly the same problem that timiteo was having.
I installed updates to Safari 5.05, and OS security updates to 10.5.8 two days ago. Since then, Safari keeps getting hung up and/or giving me this error message:
"Safari can’t open the page.
Safari can’t open the page “https://intuit.com/login/” because Safari can’t establish a secure connection to the server “intuit.com”."
This happens on numerous websites and does not happen consistently. In other words, I just received the error message when I tried to open my gmail calendar from within gmail. Other times, it has opened without trouble, and after rebooting, I am now able to open it again (this is adding up to a lot of rebooting today).
I then installed Google Chrome (so I could get some work done), but after a short time, it started doing the same thing with this error message:
"SSL connection error
Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have.
Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error."
Once I get the message, then I can't do anything with the particular browser until I reboot, which solves the problem for a short while. Actually, once I see the message in one browser, it is sure to happen in the other browser right away as well. I had none of these problems before I installed the updates, so I'm wondering if there is some conflict in the 10.5.8 OS security updates, since it doesn't seem limited to Safari.
I'm not running any virus software on the Mac. I do have Parallels running a virtual Windows machine on the same laptop and I have Norton Antivirus running on Windows, but I don't even have Windows started up. I used to have Norton Antivirus running on the Mac "side" - but I uninstalled that months ago, because it was bogging everything down.
I appreciate any ideas you may have.
Susan

Unable to establish a secure connection

I have a Time Capsule that we use as a wireless router. After my ISP changed out my cable modem, I now have faster Internet service, but none of my devices (Macbooks, iPads, iPhones) can access SOME secure sites. All other activity works fine. These sites ARE available using my mobile provider, so I know it isn't the sites. I have used both Safari and Firefox with the same result. The error message in Safari is that it "cannot establish a secure connection." No settings were changed with the Time Capsule -- only a new modem was connected. I have rebooted and run diagnostics to no avail.
Any suggestions?

The problem has been solved. It was a defective modem -- not the router!

Unable to establish an SMTP connection

The exact message I get is:
Sorry, I wasn't able to establish an SMTP connection. (#4.4.1)
I'm not going to try again; this message has been in the queue too long.
This is only happening on emails to a certain domain. A few months ago I was sending emails there with no problems. I am using Mail Version 6.3 (1503) on OS X Version 10.8.3. This happened both before and after I updated from 10.8.2 to 10.8.3. Unless there were other version changes of either Mail or OS X, I no of no changes in the system from the time of the sucessful sends to the problem sends.
The only other outgoing mail rejections I've had is one where I had an incorrect address for the recepient. Of course the error message was different on that situation.
What would cause the failure to establish an SMTP connection?
If you need more info, ask and I'll try to supply it.

Thanks, I wanted to know what else you needed to help me.
I have an account through my webpage (deedon.us). It is a plesk server. All of my emails go out through the same account, obviously with the same settings. Only emails sent to this one domain (craigslist) kick back with the message. My ISP is Frontier but I am not using the email address provided though them.
My server name (incoming and outgoing) is mail.deedon.us. This is a POP account (at least the incoming is).
In the advanced section of "Edit SMTP Server List" I have "Use default ports (25, 465, 587)" marked.
I also have "Use Secure Sockets Layer (SSL)" checked.
The Authentication option is "Password."
What part of the configuration would I change and would it affect the outgoing emails that are not problematic?
Thanks

LIBWSC_CAT:1055: ERROR: Unable to establish WSH & WSL connection

Hello Tuxedo Experts,
My tpinit call to the Tuxedo server is failing. ULOG content is pasted below:
===========================================
153100.DevnonAOMapp!?proc.8585396.1.0: 06-22-2011: Tuxedo Version 11.1.1.2.0, 32-bit
153100.DevnonAOMapp!?proc.8585396.1.0: LIBWSC_CAT:1064: ERROR: Unable to establish WSH connection 0x0002a8e10afea683
153100.DevnonAOMapp!?proc.8585396.1.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
153100.DevnonAOMapp!?proc.8585396.1.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
153100.DevnonAOMapp!?proc.8585396.1.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
===========================================
Would you please guide how to resolve this issue.
Thanks & Regards,
Ahsan

Hi Todd,
Please find below the WSL entry of the ubbconfig file:
=================================
*GROUPS
GROUP1
LMID=serverNo1 GRPNO=1 OPENINFO=NONE
GROUPsys
LMID=serverNo1 GRPNO=2 OPENINFO=NONE
DMADMGRP LMID=serverNo1 GRPNO=4
GROUPROLE LMID=serverNo1 GRPNO=9 OPENINFO=NONE
GROUPQUERY LMID=serverNo1 GRPNO=10 OPENINFO=NONE
GROUPCCS LMID=serverNo1 GRPNO=12 OPENINFO=NONE
*SERVERS
DEFAULT:
CLOPT="-A"
getserial SRVGRP=GROUP1 SRVID=1 MIN=1 MAX=1
cashsrv SRVGRP=GROUP1 SRVID=10 RESTART=Y MIN=40 MAX=40 MAXGEN=6
# RQADDR="cashsrv1" REPLYQ=Y
dosql SRVGRP=GROUP1 SRVID=300 MIN=5 MAX=10 RESTART = Y MAXGEN=5
rolesrv SRVGRP=GROUPROLE SRVID=10 RESTART=Y MIN=3 MAX=3 MAXGEN=6
querysrv SRVGRP=GROUPQUERY SRVID=1 RESTART=Y MIN=10 MAX=10 MAXGEN=6
WSL SRVGRP=GROUPsys SRVID=1
CLOPT="-A -- -n//10.126.212.124:7015 -m40 -M40 -x15 -c 1024"
=================================
I just noticed in the ubbconfig snippet above that WSL refers to GROUPsys group and SRVID 1, but Server with SRVID = 1 is not in GROUPsys, it is in GROUP1. Anyhow, that probably doesn't even matter. does it?
I have updated the WSNADDR variable accordingly:
=================================
$ echo $WSNADDR
//10.126.212.124:7015
=================================
But I am still getting the same error in client side ULOG:
=================================
180523.DevnonAOMapp!?proc.8257760.1.0: 06-23-2011: Tuxedo Version 11.1.1.2.0, 32-bit
180523.DevnonAOMapp!?proc.8257760.1.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
180523.DevnonAOMapp!?proc.8257760.1.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
180523.DevnonAOMapp!?proc.8257760.1.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
=================================
Would you please guide what could be the issue.
Thanks & Regards,
Ahsan Asghar
Edited by: Ahsan Asghar on 23-Jun-2011 12:17

OS X 10.6.1 Entourage (Unable to establish a secure connection to server)

I have Windows 2003 domain running Exchange, I have setup all my Apple clients n 10.6.1 on the domain using Directory Utility. Then I have installed Entourage 12.2.1. Once the account is setup and checks email it gives you that great error
"Unable to eatablish a secure connection to server-net.wan because the correct root vertificate is not installed"
Well silly me, I guess installing the root certificate that I created on the Server 2003 box and then installing the certificate with the OS X root account into the system keychain, the login keychain, and the MicrsoftIntermediateCertificates keychain was not enough. So after banging my head on this one and checking every where I figured it was time to post on Apple. So if someone has some great fix I will bow down to you and kiss your feet
Thanks,
Joey T.

Hello, since nobody else has replied...
You'll need to download a Certificate from someone, not sure who exzctly, or maybe self sign one? Some onfo on that here...
http://www.frontiernet.net/~beakmyn/vpn%20howto/Complete%20Home%20VPN%20Howto%20 Guide.html#mozTocId435619
http://forums.pcpitstop.com/index.php?/topic/198421-cant-login-to-frontiermyyaho o-mail/

Unable To Establish A Wireless Connection

Hi,
Currently, I am unable to connect to my Linksys router wirelessly. If I plug my computer directly into the router everything works fine but for some reason I can't connect to it any other way.
I've tried reseting the router's setting, deleting the network and trying to set it up again. I've even played around with the EasyLink advisor. All to no avail.
I am using Windows Vista on a Dell Inspiron 1505 Laptop. I am trying to connect to the Linksys WRT54G router.
Message Edited by TheZach on 01-31-2008 03:07 PM

In attempt to solve the problem, I ran the Windows "Diagnose the Problem" feature, when the computer failed to connect to the wireless network again.
It said, "This network is marked as 'hidden' and is either not in range or the wireless settings saved on this computer do not match the settings of the network.
The router is sitting roughly 4 feet away from my computer, so I doubt it's out of range. I haven't messed with any of the wireless settings lately either.
What should I do?
Message Edited by TheZach on 01-31-2008 04:18 PM

Unable to establish Remote Desktop Connection (RDC)

Hi all,
I had activated my account for Instance of SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7 but while trying to connect using remote desktop connection, I am unable to connect. Its throwing up the error, "Remote desktop can't connect to the remote computer for one of these reasons". The screen shot of the error message is attached to this post.
I am trying to connect to the servers 54.204.35.135 (SAP Frontend) and 54.225.249.36 (SAP Server). Both of them I am getting the same message.
After I activate the instance on CAL, I see that on Amazon Cloud these instances are automatically started. Then I go to elastic IP and hit on associate these IPs to associate them.
Please let me know if I need to do anything else.I am using a company laptop and am afraid if these IP addresses are being blocked somewhere.
Please advise how to establilsh the RDC.
Thank you.
Regards,
Pavan.

Hi Pavan,
the following comment in your initial question draw my attention:
After I activate the instance on CAL, I see that on Amazon Cloud these instances are automatically started. Then I go to elastic IP and hit on associate these IPs to associate them.
So you started the solution (that contains 2 images) in CAL and then changed some configuration settings in the EC2 web console, correct?
It is important to understand, that changes to the configuration of the instances, that are made outside of CAL will have a severe impact. Only CAL knows how to configure both instances correctly, especially when it comes to the network and communication between each other.
If you don't mind, would you be able to shutdown and terminate all running instances of this Trial solution in CAL and start from scratch without using the EC2 web console. We have throusands of users of this system and all of them get the same software - all works. I suspect the changes in the EC2 console to be a culprit here.
All these activities should be done in CAL, not in the EC2 console:
So please terminate all instances of this solution and wait until they are completely removed.
Then go to the Solution tab and click on create instance
go through the guided procedure and pay attention on the firewall / port settings in step 3
finish and wait 30 minutes until the solution is fully started
try to connect.
Please let us know the result.
Regards,
Hannes

Unable to establish network endpoint connectivity from an executable using localhost - error: -314350

Hi,
We have two executables, one a sender and another a receiver. The receiver initiates a connection using the IP address of the sender's computer. They use the network endpoint connectivity mechanism to establish connection and transfer data. Everything (connectivity establishment, data transfer etc) works when the sender and receiver run on separate computers. If they run on the same computer the connection cannot be established and we get error message -314350 from 'Create Network Stream Reader Endpoint' VI on the receiver side. We tried using the IP address explicitly as well using localhost as the IP address. None of the options work.
Now if we run the sender and receiver VIs from within the Labview environment, on the same computer, everything works fine. Everythng works whether we explicitly use the IP address of the computer or just use localhost.
If one of the two runs as an executable and other runs in the environment, we get the same error message (-314350)
Does anybody know what seems to be the problem ?

In case anybody else runs into this problem, you might want to check out the Endpoint URLs section in the following tutorial. To elaborate further on the issue, when creating an endpoint, you must supply a unique endpoint name that doesn't already exist in the system or an error will be generated. This is fairly straight forward when dealing with a single application instance on a given machine. However, if you have multiple application instances running on the same machine, things become more challenging. If you have two applications App1 and App2 that both contain a reader endpoint named MyReader, we need to ensure the data received from the network is properly routed to each application. To facilitate this, each endpoint is registered in a named context, and only one application can create endpoints in that named context. If a second application tries to create an endpoint in a named context already being used by another application on that machine, you'll receive error -314350. This is analagous to how applications on the same machine can't use the same port number when using TCP/IP to communicate. If you don't explicitly specify a context when naming the endpoint, we'll attempt to create the endpoint in the default context (which is equivalent to the empty string). This means things will work fine when running both VIs from the development environment since both VIs are in the same application instance. However, if you create a built app for each VI and run both applications on the same machine, you'll receive error -314350 unless you've gone to the effort to make sure your endpoint names are unique across contexts. The same thing would happen if you ran one VI in the 2010 dev environment and the second in the 2011 dev environment on the same machine. I hope this helps clarify things.

Firefox is unable to establish a complete connection with Facebook game apps while using the tethering method between PC and Android

Although there is no problem loading the page, there seems to be a problem with the save feature. I can go in the game and perform my tasks but when I exit and return it is as if I was never there. In the bottom left hand corner of my monitor I notice that the site is continually trying to connect, verify, read profile, transfer assets, connect, verify...it is like a continuous loop. Is there a setting I need to adjust to allow access?

Although there is no problem loading the page, there seems to be a problem with the save feature. I can go in the game and perform my tasks but when I exit and return it is as if I was never there. In the bottom left hand corner of my monitor I notice that the site is continually trying to connect, verify, read profile, transfer assets, connect, verify...it is like a continuous loop. Is there a setting I need to adjust to allow access?

MacBookpro Receiving pop up warnings: Error: Unable to establish a secure connection to pop.mail....etc. because the correct root certificate is not installed. Help needed please.

My Entourage is very slow and 2 Error pop ups (above) are showing. Additionaly, a warning about the start up disc being full. I decided to back up to an external HD.When backing up I was surprised to see 9.4GB in the catagory named 'Other'. Ive probably got too much junk stored here (unless it could be imovie files?). If I could see what was in 'Other', and delete what I dont need, this may be the answer to freeing up more space. The next big file I have is under 'Pictures' which is 1.7GB. I have never downloaded any video or Youtube stuff.
This is my first experience on this forum.

Apple in their glorious wisdom did not update the root certificates for users of 10.5, only for 10.6 and later.
You'll need to make some changes, open your Keychain Access in your Applicaitons or Utilitties folder.
Delete the compromised DigiNotar root certificates, also change the KeyChain Access preferences > Certificates to
Best Attempt
Best Attempt
Require Both
Because the Certificate Autorities themselves are being attacked, you need the most recent and varied source of valid certificates so your comptuer does the best it can to verify the site your visiting is legitiment.
Also make sure the time and date on your computer is accurate and updated with Apple's time severs, allow any such time requests out your outgoing firewall (aka LittleSnitch)
You might decide to upgrade to 10.6, it's the best OS version for users of Intel Mac's, strips out the PowerPC code your not using and improved video drivers for better graphics performance. It should run most of your 10.5 software with just minor updates at most.
Please backup your data off the machine (not TimeMachine) before doing anything as you might need to wipe the drive if the upgrade doesn't go correctly.
http://store.apple.com/us/product/MC573Z/A
However OS X Lion 10.7 is a radical change, won't run your older software or drivers and likely be slow on most older hardware. I'd advise against installing it, buy it with a new machine instead.

Unable to establish any ssl connection

Similar Messages

Maybe you are looking for