Unable to establish connection to weblogic server

Hi Everyone,
I am getting the following error:
Testing JSR-160 Runtime                ... success.
Testing JSR-160 DomainRuntime          ... failed.
Cannot establish connection.
Testing JSR-88                         ... skipped.
Testing JSR-88-LOCAL                   ... skipped.
Testing JNDI                           ... success.
Testing JSR-160 Edit                   ... failed.
Cannot establish connection.
Testing HTTP                           ... success.
Testing Server MBeans Model            ... skipped.
Testing HTTP Authentication            ... success.
4 of 9 tests successful.I have "Use HTTp Proxy Server" unchecked. However I am still not able to establish connection.
I also restarted my jdev, but no luck.
I am using JDeveloper Studio 11.1.1.5.0.
Thanks in advance.

Hi
From the admin console ... Are you able to check the status of Node Manager ?
If yes ... please check the SSL configuration of managed servers ...
Check the domain administration port also.
Jin

Similar Messages

Unable to establish connection with MI server

Hi Himanshu Limaye here.
I am an ABAP programmer,now into SAP NetWeaver --MI
I have successfully installed the Web Application Server.
I have also set-up an MI Client on another machine.
But when I start synchronization using my login credentials, the following error is initiated:
Could not generate Conversation ID: INTERNAL ERROR
However ,before this error message the the Synchronization log displays : Connection to Server initiated. Inbound processing started.
Please provide the necessary solution at the earliest.
Thanks.

Hi Himanshu
Please implement notes 1001292 and 984207 in the MI middleware and this might definitely solve your problem. Make sure you follow the steps mentioned in the note correctly. Hope this helps.
Best Regards
Sivakumar

VMware SQL 2008R2 bcp error - SQLState = 08001, NativeError = 0 Error = [Microsoft][SQL Server Client 10.0] Client unable to establish connection due to prelogin failure

Can someone help me resolve this error? Thanks
Windows Server 2008 R2 Standard SP1 64-bit - SQL Server 2008R2 Standard 64-bit
VMware vCenter Server Version 5.1.0
SQLState = 08001, NativeError = 0
Error = [Microsoft][SQL Server Native Client 10.0]Client unable to establish connection due to prelogin failure
bcp program:
bcp SYM.dbo.ACCOUNT in "D:\Data\SQLExtract\EXTRACT.ACCOUNT" -f"D:\Data\SQLCommands\FMT.ACCOUNT" -S DEV-DATA\TEST\ -T -oSYMLOAD.LOG Type SYMLOAD.LOG >> SYMLOAD.LOG.CUMULATIVE
The bcp program executes successfully on a local instance of SQL Server.

The error has nothing to do with BCP as such, but it is a connection problem. That is, for some reason you cannot connect to your instance from the VM. I would exect that you face a similar problem if you tried SSMS.
It could be a firewall issue, but prelogin suggests that you reach the instance. But possibly you don't come far enough for the login failure to be recorded. Possibly the instance is not configured to audit login failures.
The message you would see would be similar to
2010-08-18 14:11:30.91 Logon Error: 17809, Severity: 20, State: 3
Possibly followed by a a line that details the message. The error number may be different.
Erland Sommarskog, SQL Server MVP, [email protected]

Unable to open any websites from the search engines. the ones I have tried are google, yahoo and ask. They opened until recently. The popup says" Firefox can't establish connection to the server." Ask worked last night but is not working now.

When I try to open a web site from one of the search engines a pop up shows stating that Firefox can't establish connection to the server. I can't open any websites through any of the search engines.

Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

SQL Server Reporting services. failed to establish connection with project server. verify the url is correct.

Dear All,
I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
technet in order to find solution.
ISSUE/PROBLEM:
At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.?
REGARDS DANISH DANIE

Dear Paul,
I am able to open the URL (http://psdb/ReportServer )using
domian credential and page open with these contents
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
Second,
Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
file also done the registry settings to disable the loop back settings.
Same error still ! .... what should i do now ???
REGARDS DANISH DANIE

Unable to establish connection to R/3

Hi,
We have just installed XI and done all configurations.
I am doing one example ( connection r/3 to legacy system ) . When I open I outbound object in Integration Repository and in Imported objects when right click on IDocs and click Import SAP Objects, it asks me for SAP logon details , but when I try to connect it shows an error
Unable to establish connection to R/3 system 133.136.233.170 (system=00, client=110) Troubleshooting tips:
Is the target system online?
Check the connection data (note that server names and groups are case-sensitive)
Tips for administrators (see the configuration guide for more details):
Does the user have the required authorizations in the target system?
Is the target system configured correctly in "etc/services"?
I am putting IP address in application server and checked the system number as well.
I am able to ping From webas to R/3.
can anybody help me out what could be the error
Thanks
Rekha

Hi Rekha,
did you take a look at this page?:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
you can find sap notes - if you're expiriencing problems with idoc import (SAP Notes 677732 (authorizations), 672745 (missing function modules), 212011 (access to IDoc metadata), and 718320)
also "Authorizations Required to Import from Systems Based On SAP Web Application Server"
take a look at this page
and read if carefully it may help you with your problem:)
Regards,
michal

Connection Pool - unable to establish connection for one or more OC4J inst.

Hi.
I'm using Oracle JDeveloper 10.1.3.1 to develop some app. Database is Oracle XE 10.2.0. Application server is Oracle Aplication Server 10.1.3.1
After create a needed code, I' v tried establish Connection Pool. When I' v tested connection, next errors was occurred:
Unable to establish connection for one or more OC4J instances<<
Home on admin.FRIEND-6843859F - Failed due to error: "Exception occurred testing connection. Exception: java.sql.SQLException: invalid arguments in call."<<"FRIEND-6843859F " is Computer name where Application server is installed.
--Database is started.
--App.server processes are started.
How can I solve this problem?
Thanx

If you are using ADF "BC" Jdev will not support more than one connection
I've tryied and always gives a errors.

Unable to establish connection to R/3 system

Hi Guys,
I am doing one example ( connection r/3 to legacy system ) . When I open I outbound object in Integration Repository and in Imported objects when right click on IDocs and click Import SAP Objects, it asks me for SAP logon details , but when I try to connect it shows an error
Unable to establish connection to R/3 system 192.168.70.57 (system=07, client=800) Troubleshooting tips:
Is the target system online?
Check the connection data (note that server names and groups are case-sensitive)
Tips for administrators (see the configuration guide for more details):
Does the user have the required authorizations in the target system?
Is the target system configured correctly in "etc/services"?
Guys can anybody tell me what mistake i am doing ?
Thanks
Manish

Java Web Start Console shows me this error
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:413)
 at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:823)
 at com.sap.mw.jco.JCO$Client.connect(JCO.java:2922)
 at com.sap.aii.upload.sap.SAPConnection.connect(SAPConnection.java:83)
 at com.sap.aii.upload.sap.SAPConnection.<init>(SAPConnection.java:37)
 at com.sap.aii.upload.sap.SAPUploadSource.<init>(SAPUploadSource.java:150)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceBean.connect(UploadServiceBean.java:87)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:73)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0.openSAPSource(UploadServiceRemoteObjectImpl0.java:240)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0p4_Skel.dispatch(UploadServiceRemoteObjectImpl0p4_Skel.java:196)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)

Client unable to establish connection; 08001;

Hello,
My SSAS multidimensional cube processing fails with the following error:
"OLE DB error: OLE DB or ODBC error: A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to
allow remote connections. For more information see SQL Server Books Online.; 08001; Client unable to establish connection; 08001; Encryption not supported on the client.; 08001"
It was running fine with no errors till yesterday. Does anyone know what may be wrong?
Could it be because of a new firewall rule on the server that host the SQL server?
Appreciate your help!
Thanks!

Hi Nihcas,
Based on the error message, it seems that the account cannot connect to the data source of the SQL Server Analysis Services database. And you said that a new firewall rule on the server that host the SQL server, then this issue can be caused by this firewall.
To access an instance of the SQL Server through a firewall, you must configure the firewall on the computer that is running SQL Server to allow access. The firewall is a component of Microsoft Windows. In your scenario, please try to configure the Windows
Firewall to Allow SQL Server Access and check if the issue is persists or not.
http://msdn.microsoft.com/en-us/library/cc646023(v=sql.105).aspx
Regards,
Charlie Liao
TechNet Community Support

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
 Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
 Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
 Lid: 45169 StoreEc: 0x824
 Lid: 44273
 Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
 Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
 Lid: 56945
 Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
 Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
 Lid: 59505 StoreEc: 0x3F2
 Lid: 52465 StoreEc: 0x3F2
 Lid: 60065
 Lid: 33777 StoreEc: 0x3F2
 Lid: 59805
 Lid: 52209 StoreEc: 0x3F2
 Lid: 19778
 Lid: 27970 StoreEc: 0x3F2
 Lid: 17730
 Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
 + CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
 + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

Connect to weblogic Server's JVM

Hello everybody,
IÂ´m trying connect to weblogic serverÂ´s JVM to execute a class inside the jar.
It works fine, but my jar has a class with static atributes that I want change its values calling the following command line:
%JAVA_HOME%\bin\java -Djavax.naming.Context.INITIAL_CONTEXT_FACTORY=weblogic.jndi.WLInitialContextFactory -Djavax.naming.Context.PROVIDER_URL=t3://localhost:7001 -jar %_APP_HOME%\WEB-INF\lib\AdminServer.jar -1
Afer it the values of my class atribute has changed but my web application does not see this news values.
I thinking... Am I connected to weblogic serverÂ´s JVM ?
Could Anyone help me?

You need to take a step back and think about what you're trying to achieve, Denilson.
Using static attributes in classes has all sorts of side-effects because of how classloaders work in J2EE - if you're referencing a class used inside the web application and poking a static property, what is most likely happening is that your local application is loading the class in its own classloader, modifying the property, and then exiting. A separate copy of the class has been loaded by the web application.
You can see more information on classloaders here: http://edocs.bea.com/wls/docs81/programming/classloading.html#1089798
If you want to run an application to change some value on the server, there are a number of options available:
- getting, changing and replacing an object in the JNDI tree (this is still an ugly solution)
- using a servlet or stateless session bean to get the job done (this is a better solution - simple, but still not as good as you could potentially get)
I'd suggest using a servlet to modify an attribute scoped at the web application level as a lightweight way to do what you're trying to. (if I'm understanding what your goal is correctly). That way you could test making changes with your browser, not just a Java application.
Does any of that help?
 
Kevin Powe
http://www.integral-techsolutions.com

Unable to establish connection with SQLServer from Java Application

Dear All,
I am facing the issue of establishing connection with SQL Server from Java project developed in NWDS. I am writing a jaas plug-in, as a part of that I am writing a login module to authenticate a web application through jaas, and I got need of fetching some data from SQL Server which is located in remote host. I am getting error in the line of code
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver")
I also added the 3 jar files (msbase.jar,mssqlserver.jar,and msutil.jar) to my login module project and copied the same files at C:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\ext\MSSQL.
My MI Landscape is j2ee stack + abap stack +WAS 6.40 with MAXDb as a database.
Could anyone please let me know the solution if you are aware of it.
Thanks and Regards,
Kishore

I solved it by writing the following code
Connection con;
Statement stmt;
DataSource ds;
Context ctx;
ctx = new InitialContext();
if(ctx == null) throw new Exception("Boom - No Context");
ds=(DataSource)ctx.lookup("jdbc/SQLDB");
con = ds.getConnection();
stmt = con.createStatement();
String query = "SELECT * FROM SubjectBIR where Subject_ID='" + user + "'";
ResultSet result = stmt.executeQuery(query);
stmt.close();
con.close();

Trying to edit a wordpress then in dreamweaver cc with mamp but things don't work out. dreamweaver can't establish connection with my server.

Trying to edit a wordpress then in dreamweaver cc with mamp but things don't work out. i've been searching through the net bt i didn't find an answer. i've followed many tutorials and did exactly the things that was asked but dreamweaver can't establish connection with my server. here's a few pics with the preferences i'm trying to establish a connection. Note that i tried it without "localhost" in the weburl. mamp is running with apache and mySql. Anyone please.

Hi Gareth,
See if the following link helps:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=174271">https://www.sdn.sap.com/irj/sdn/thread?threadID=174271</a>
Bye
Ankur

MapiExceptionMdbOffline: Unable to make connection to the server. (hr=0x80004005, ec=1142)

Hello,
We have 2 Exchange 2013 (build 712) servers in a DAG with distinct subnets. Cisco ASA in between was set to have no filtering between servers in subnet.
We cannot add database copies nor move mailboxes.
Tes-Mapiconnectivty fails with
unspaceId : e8a087f1-6197-48df-b094-d5c93a7b6070
Server      : CLI-SRV01
Database    : CLI-MDB01
Mailbox     : SystemMailbox{376e8d54-7154-484a-a0a3-58f22d73236f}
MailboxGuid :
IsArchive   :
Result      : *FAILURE*
Latency     : 00:00:00
Error       : [Microsoft.Exchange.Data.Storage.MailboxOfflineException]: Cannot open mailbox /o=First
              Organization/ou=Exchange Administrative Group
              (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CLI-SRV01/cn=Microsoft System Attendant. Inner error
              [Microsoft.Mapi.MapiExceptionMdbOffline]: MapiExceptionMdbOffline: Unable to make connection to the
              server. (hr=0x80004005, ec=1142)
In event log:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Adding database copy fails with
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'CLI-SRV02.CLI.ch'. Hresult: 0xc7ff07d7. Error: Failed to open a log truncation context because the
Microsoft Exchange Information Store service is not running. [Database: CLI-PFDB02, Server: CLI-SRV01.CLI.ch]
How can I further verify communication from CLI-SRV02 to CLI-SRV01 ?
Any help welcome
/Patrice

Hi,
Let's begin with the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b651d65c-92f3-460c-b555-247acb8e6fd7/recovered-exchange-2013-arbitration-system-mailboxes?forum=exchangesvravailabilityandisasterrecovery
It is the same error in the event log with you when moving mailboxes. And it can be resolved by recreating the mailboxes.
Additionally, to check the network connection between two servers, I recommend you use the network monitor to catch the package.
Thanks，
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Unable to create connection to Application Server Control from JDev

Hi All,
I am unable to create connection to Application Server Control of SOA Suite from JDeveloper and getting following error:
Error getting OC4J Process for: opmn-home+oc4j-<hostname>-<OPMN Port>-default:
Error connecting to OPMN (is it running?): Connection refused: connect
I restarted all OPMN processes...still getting the same error.
Thanks
Krrish

Hi.
I got a similar error sometime ago.
It was related to OPMN not getting bound to the correct server IP. It happened because my SOA Suite was installed in one machine that does not have a fixed IP (or uses loopback adapter) and then I tried to connect to this SOA Suite from another machine, using JDev.
I checked this by running "opmnctl debug". then you can see on what IP the opmn is listening on.
Didn't know how to solve this.

Unable to establish connection to weblogic server

Similar Messages

Maybe you are looking for