Unable to execute tcodes SOLUTION_MANAGER , SMSY in solution manager 4.0

Hi Dear All,
I have recently installed solman 4.0 in windows
It contains the fallowing support packs.
SAP_BASIS      700                0011
SAP_ABA        700                 0009
PI_BASIS     2005_1_700         0009
ST-PI            2005_1_700        0002
SAP_BW         700                 0009
SAP_AP          700                 0006
SAP_HR          600                 0007
SAP_APPL       600                 0006
Here i want to configure Manintainence optimiser and unable to execute SOLUTION_MANAGER , DSWP, SMSY.
Can any one please help me how to proceed with the current situation.
I havent done anything after the instalation ( Just applied support packs 1008717 and 975872.
Thanks In Advance,
Regards,
Vamsi
Edited by: vamsi koganti on Jan 1, 2008 11:19 PM

Hi Dear All,
I have recently installed solman 4.0 in windows
It contains the fallowing support packs.
SAP_BASIS 700 0011
SAP_ABA 700 0009
PI_BASIS 2005_1_700 0009
ST-PI 2005_1_700 0002
SAP_BW 700 0009
SAP_AP 700 0006
SAP_HR 600 0007
SAP_APPL 600 0006
Here i want to configure Manintainence optimiser and unable to execute SOLUTION_MANAGER , DSWP, SMSY.
Can any one please help me how to proceed with the current situation.
I havent done anything after the instalation ( Just applied support packs 1008717 and 975872.
Thanks In Advance,
Regards,
Vamsi
Hi ,
Sorry actually the error is ( The software component of ST is not present)
As there is no ST Software component i am unable to execute tcodes mentoned above.
Can any one help me how to install the ST software component.
I tried in the market place to look for instalation steps but i cant find any.
Please help me guys.
Many thanks,
Regards,
Vamsi.
Edited by: vamsi koganti on Jan 2, 2008 8:19 AM

Similar Messages

How define ECC 6.0 system in smsy? Solution Manager 7.0 SP15

Hi Colleagues,
I have to define ECC 6.0 in my Solution Manager 7.0 SP15.
At smsy transaction -> Landscape Components -> Systems I don't find name SAP ECC to create new system. So I created it on SAP ERP.
My problem is when I go to create a logical component to assign my ECC system. So I go to transaction smst-> System Groups and Logical Components -> Logical components -> SAP ECC -> SAP ECC Server, I've created a Z New logical componets and at the right frame I am not able to assign my define system under SAP ERP. I get a pop-up "No system found for this product/main instance".
Please could you help me?
Thanks and Regards
Raul

Hi,
The problem is solved.
When I defined the system in smsy transaction, I made a mistake because I define it like a ERP 2005 and not a ECC 6.0, so in the next step when I want include this new system in a ECC 6.0 logical group, it wasn't able to find any ECC 6.0 system defined.
Thanks, René for your reply.
Regards

Executing Ecatts in Background using Solution Manager

Hi,
Can u please explain me the stpe to execute the Ecatts in background from Solution Manager. I have created Scripts using SAPGUI Method and In Solution Manager what are the steps i have to do ( am new to Solution Manager, so please explain me clearly ) .
regards,
Nagapuri

Hi ,
You will not be able to run SAPGUI scripts in background as the SAPGUI driver acts on the sap screens to automate. Only scripts created with TCD driver can be run in background.
Regards,
Justin

Unable to create tickt in service desk - Solution manage.

Hello,
I have implemented service desk ( Solution manager) and It is working fine for most of the system but i am getting error while creating a ticket in service desk for one system.
Due to some RFC connection problem i have regenerated the RFC ( trusted , Read and TMW) from Solman to Satellite system.
and now I am not bale to create ticket for that system.
Error message :
The URL http://cismp.cargotec.com:8014/sap/bc/bsp/sap/dswpnotifcreate/msg_new.do was not called due to an error.
Note
The following error text was processed in the system SMP : Error SYSTEM_CORE_DUMPED occured. P1=11
The error occurred on the application server cismp_SMP_14 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: DO_HANDLE_EVENT of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DISPATCH_INPUT of program CL_BSP_CONTROLLER2============CP
Method: DO_REQUEST of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Can any body guide me what should be done to resolve the issue.

Hi Prakhar,
As i mentioned workcenter is working fine for all other systems. and user have all roles same as in other systems.
BP is created and we are trying to create ticket from Solman itself so there is no point to maintain bCOS_CUST table.
but still we are not able to create ticket only for one system.
Error Message :
Error when processing your request
What has happened?
The URL http://cismp.cargotec.com:8014/sap/bc/bsp/sap/dswpnotifcreate/msg_new.do was not called due to an error.
Note
The following error text was processed in the system SMP : Error SYSTEM_CORE_DUMPED occured. P1=11
The error occurred on the application server cismp_SMP_14 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: DO_HANDLE_EVENT of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DISPATCH_INPUT of program CL_BSP_CONTROLLER2============CP
Method: DO_REQUEST of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SMP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cismp_SMP_14 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server cismp_SMP_14 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 011 -u: XABHYABH -l: E -s: SMP -i: cismp_SMP_14 -w: 1 -d: 20091006 -t: 141511 -v: RABAX_STATE -e: SYSTEM_CORE_DUMPED
Regards,
Bhavesh

Solution Manager create an IBase...

Hi fellows,
My question is, if in the future I must apply more satellite/backend systems in my SLD (SMSY) in Solution Manager... As you know when we want setup maintenance optimizer generally appears an error which it said that we must have to Generate an IBASE (IB51 & IB52) and so I created that Ibase entry with my all systems landscape... but imagine that I want to apply more systems in tcode SMSY (System Landscape Directory tree) when that happens I must create again on more time an Ibase, this is, I will have problems in maintenance optimizer if I apply more systems and don´t make the regenerate the IBASE ?
Best regards,
Thanks in advance,
Jmgmad

Hi Prakhar Saxena,
Thanks a lot for your quick and usefull answer... you have right!!
One more question about IBASE and the respective tcodes IB_GEN and IB52, I duplicate the systems in IBase monitor on IB52 I see in that tree of SAP solution Manager Installations I have twice systems, because when I regenerate the Ibase (in IB_GEN) I select the same systems that I have apply in past... so I want to delete the systems that are repeated... How can I do that ?! ...
Can you explain how I delete systems in that tree on IB52 (with Ext.ID: SOL_MAN_DATA_REP) ??
Thanks indeed...
I will give you a max point !
João Dimas

Early Watch Alerts Problem in Solution Manager

Hello,
I am trying to configure EWA for my SAP R/3 systems in Solution Manager 3.2. RFC connections are working fine. EWA report that is getting generated is showing me following problem :
EarlyWatch Alert - R/3 System**********
Download Problem
We could not perform a correct analysis because essential parts of the download data are missing. The cause is probably a problem with data collection or transfer.
Recommendation: Please check the log for this session in the Service Data Control Center (execute transaction SDCC or the new SDCCN in your system). If an error entry is listed, perform the Service Preparation Check.
Implementation: To perform the Service Preparation Check, execute transaction SDCC and choose Information-> Service prep. check or if you use SDCCN create a new task 'Service Preparation Check'.
The result of Service Preparation check ( as recommended) is not throwing any error.
Can anyone help me out on this.
Regards,
Yashodhan

Hello Yashodhan Mujumdar,
we have warnings about differences in the function interface, but all works, so we ignore them.
But the missing data interface seems to be the error.
Did you read note 781680?
Do you have the newest ST-PI (2005_1_xxx SP3) and ST/A-PI (01G_xxx, this is an installation, no patch)? Do you have the right flavour of ST/A-PI?
Are ST03N and ST06 working?
Do you refresh service definitions from sapnet? Did you generate (after service refresh) on the solution manager system the includes (SPRO -> SAP Solution Manager -> Basic settings -> SAP Solution Manager System -> Operations -> Setup Service Data Control Center -> Generate Includes....
If these checks are all ok you might deactivate SDCCN both in satellite system and solution manager (SMSY -> Goto -> Solution Manager Operations -> Administration SDCCN) and activate it again.
If this doesn't work you might use the big hammer:
1) delete all the service definitions in satellite system like described in note 727998
2) delete all entries in table /BDL/_GENER (satellite system)
3) create in SolMan system a new session in order to collect and send data for this session in satellite system; if you don't see the session in the satellite system please execute there the "Maintenance Package"
4) elaborate the data for this new session in SolMan system
If all this doesn't help, open a message in sapnet
Bye
Message was edited by: Riccardo Escher

Solution Manager error (icm/host_full_name)

Hello All,
I am executing "solution_manager" in the Solution Manager system and immediately I get this error, "Profile parameter icm/host_name_full is not set correctly (see long text)".
The help, gives me the follwoing information :
"Set the profile parameter icm/host_name_full correctly. For more information, see SAP Notes 434918 and 677118."
Both notes were not of much help!
I have set the instance profile parameter called "icm/host_name_full" and set its value to the server's FQDN. Also excecuted SMICM to restart ICM. But, still I keep getting this error.
I restart SAP also, just to check if that is going to help, but to no avail.
Am I missing something?
Really appreciate any help in this regard.
Thanks in advance!
Sapna

Hi,
I got the same error when we installed the solman 4.0 in test server.
We set a parameter ICM/HOST_NAME_FULL in RZ10.
After set the parameter we need to restart the instance.i am giving the parameter and value.
ICM/HOST_NAME_FULL =<hostname>.in.<companyname>.com
Example:ICM/HOST_NAME_FULL =dell01.in.softsolution.com
Here dell01 is my hostname.
domain is in(india)
softsolution is a organization
i hope it will help you.
kiran kumar .v

How to add enterprise Portal in Solution manager

Hello,
I wanted to add the enterprise Portal system in Solution manager ( for Service desk ) in SMSY.
Can anybody guide me how can I add the EP( enterprise portal system) in Solution manager
Regards,

Hello,
What is your SLD look like?
You have to connect the EP to SLD and use the LANDSCAPE FETCH job to import to SMSY - Txn SMSY_SETUP - Source SLD.
Now the non abap system data present in the SLD will be reflected in SMSY.
Refer below threads:
How to define an enterprise portal system(JAVA) in SMSY in solution manager
Re: Creation of solution for J2EE system
How insert Enterprise portal in Solution Manager
Regards
Vivek

Add BI System in Solution manager

Hi All,
I need to add BI DEV, BI PRD Systems to solution manager. As per my understanding first i need to create logical systems, after wards i have to add this system in SMSY.
I will be glad if some one can post ur suggestions and procedure to add this
Thanks

Hi,
this is same for all the system. only you have to select appropriate product instance
please refer this screenshots here [SMSY Set Up|http://www.way2sap.com/sap-article/adding-a-sap-system-to-smsy-of-solution-manager-1907/]
get the other set up guides on service.sap.com -> release and upgrade info -> installation and upgrade guide -> SAP components -> SAP Solution Manager -> Operation guides.
Thanks
Jansi

System monitoring configuration in solution manager EHP1

Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
Rohit

I'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt

Monitoring of Standalone EP 7.0 system in Solution Manager 7.0

Hi Experts,
I need to configure Solution manager 7.0 for monitoring EP 7.0 (Stand alone ) system.
Can you share documents related to configuration of Solution Manager 7.0 for monitoring EP 7.0 system?
Thanks,
Anit

Hi,
EP Monitoring is done by Solution Manager Diagnostics.
Some Basis steps for ref
1. Definition of EP system thru SMSY in solution manager system
2. SMD agent installation in EP system with CCMS ping cofiguration in both solman and EP system
3. Wily Introscope Enterprise manager installation in solution manager system
3. From SMD wizard, you can configure the list of activities to be monitored for a EP system.
For detailed info check SMD installation guide
Regards
KT

How to restrict executing tcodes in transaction tab for master clients

This question applies SOLMAN project implementation tools: SOLAR01, SOLAR02 and so on.
Our ERP2005 development U50 system has two clients:
One is master client 101 where all customizing should take place but no transactions are allowed
second client 102 works as sandbox client where new customizing can be test and master data and transaction are allowed.
Only U50/101 is defined in Solution manager SMSY in system role 'development system'. Currently U50/102 is not defined in Solution manager to any system role at all.
As configuration should take place via Solution manager, the consultants use SOLAR01 and SOLAR02 in system role 'development system' meaning that they are connected to U50/101 if want to execute transactions in transaction tabs or IMG nodes in Configuration nodes.
But U50/101 is our MASTER client and no transactions nor most master data are allowed in there. We want to keep it clean. How can I avoid tcodes being executed in system role 'development'. I want to allow consultants use tcodes if they change to system role 'quality system'. But they might forget to change the system role before executing the transaction.
Is there an option in Solution manager Project implementation tools that do not allow tcode launch from transaction tabs when system role is 'development system'.
Of course I can restrict tcode execution with authorizations in satellite systems, but then I would need to disable authorizations for each tcode possibly being used. So I don't like that option.
br: Kimmo

Okay, I'll continue dialog with myself. I found solution how to assign other clients on one system to other system roles, which are so-called 'customer roles'.
See solution manager help:
http://help.sap.com/saphelp_sm40/helpdata/en/3b/8be61c54d22945837fd69861d21a08/content.htm
I did not know until know, that system roles are actually customizable. The roles with letter P,D,C,T,E, etc. are reserved for SAP but you can create your own system roles into table SMSY_ROLES. You would not do it with SM30, but from tcode SMSY and following menu Utilities-System Settings->tab:System Roles. Switch to change mode. Roles with 0-9 are available for "customer roles". Choose role type and write your own description ( like: Sandbox client in development system ).
Now the new role is available in SMSY. But You cannot see it yet in SOLAR_PROJECT_ADMIN/System Landscape tab. In there you must press button 'System role assignment' and in the opening window add your own 0-9 role defined earlier and save. Now you see your new role in 'system landscape' tab and you can assign systems to it like you had done with SAP standard roles.
Now users using implementation tools can change their current system role to your new 'customer role'.
But what it comes to my original problem (see title), that still remains. I have debugged the tcode execution from transaction tabs and don't see any possible way to avoid tcodes being executed for an unwanted system role. An Enhancement Spot ( =new BADI) can of cource be used for making custom rule for my requirement.
I'll make this thread answered. Hope you joined my self-dialog.
Keywords: DEFINE EDIT SYSTEM CUSTOMER ROLES SMSY_ROLES
br: Kimmo

Facing issue with adding systems in SMSY - solution manager

Hi all,
 We are facing an issue with the solution manager in tcode smsy. When i create a system in the corresponding component say ECC with product version ECC6.0.The next screen shows that the <SID> has been added successfully. But when i navigate to the path and i unable to see the system SID which i have created.
 Again i have tried to create the same system with same SID, but it shows that " SID already exists "
 Also i need another suggestion, we have planned to add 60 systems in the same solution manager. Kindly suggest me , how many systems we can add in single solution manager in maximum and for configuring EWA ?
Thanks
Raj

Hi Raj,
You can delete the old system entry and then try creating the saem again..
Also while creating mention correct product and version and the installation number.
You can also use the assistant for this.
Have you added all your servers and DB?
regards,
Raja. G
Edited by: Raja Gunasekaran on Aug 28, 2009 1:26 PM

Unable to execute SDT request JAVA_EE during the JAVA---Input_adm_user_pwd

Dear Friends
I am stuck in CONFIGURATION PHASE of EHP5 Upgrade.
The ABAP phase has been completed but stuck in the Java processing INPUT_ADM_USER_PWD
"unable to execute the SDT request Java_EE operation configure on
hostname dbserver1 instance 02 Modules execution failed.
Execution of the unit PREPARE failed. Connection to the Upgrade Tool was closed."
TROUBLE TICKET LOG
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: $(/J2EE/StandardSystem/SAPSystemName)
Hostname...........: $(/J2EE/SAPGlobalHost)
Install directory..: $(/J2EE/StandardSystem/SAPSIDDirectory)
Upgrade directory..: $(/JUMP/DIR/MAIN)
Database...........: $(/J2EE/DBSystem/DBInfoName)
Operating System...: $(/J2EE/StandardSystem/ServiceInstance/BCCentralServicesInstanceHost/OpSysType)
JDK version........: $(/SystemProperties/JavaVersion) $(/SystemProperties/JavaVendor)
SAPJup version.....: $(/MAIN_VERSION)
Source release.....: $(/ER_CODE)
Target release.....: $(/J2EE/ShadowSystem/Version)
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....: $(/J2EE/StandardSystem/Usages/StrCurrentUsages)
ABAP stack present.: $(/J2EE/StandardSystem/BCSystemPresent)
The execution of ended in error.
Could not perform operation on secure store. See previous messages.
Could not perform operation on secure store. See previous messages.
Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.util.secstore.SecureStoreException
Could not perform operation on secure store. See previous messages.
INPUT_ADM_USER_PWD
INIT
PREPARE
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
Regards
Anwer Waseem
Edited by: Anwer Waseem on Nov 9, 2011 11:48 PM

TROUBLE TICKET LOG
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
The execution of ended in error.
Could not perform operation on secure store. See previous messages.
Could not perform operation on secure store. See previous messages.
Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)*
its locating on drive e:\ which is wrong directory, the global directory are avaiable on drive S:\; this is the reasons that processing are ending with error.
Please advise how to resolve ASAP.
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.util.secstore.SecureStoreException
Could not perform operation on secure store. See previous messages.
CHECK_PREPARE_UNIT
Regards
Anwer Waseem

Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

Hi Everyone,
Whenever I install some new software in my new laptop I get this error:-
Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
I have tried synchronizing the clocks but it doesn't remove the problem.
These softwares work on another laptop that i have, which also runs windows 7.
Can someone please tell me the solution as this is extremely urgent.
Thanks In Advance.
-Michael

In short:
============
My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
In detail:
============
Problem:
Failed to install this application
- http://www.ssware.com/cryptoobfuscator/download.htm
- on Windows 8.1 x64
- Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
First Candidate Solution
The issue turns out to NOT be security rights on the Temp folder
ESET Smart Security HIPS Advanced Memory Scanner is the cause
http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said.

Unable to execute tcodes SOLUTION_MANAGER , SMSY in solution manager 4.0

Similar Messages

Maybe you are looking for