Unable to generate schema by consuming wcf sql stored procedure

Hello All,
I am trying to generate a schema by consuming a stored procedure and am getting the below error: can you please help with the same:
Error while retrieving or generating the WSDL. Adapter message: Retrieval of Operation Metadata has failed while building WSDL at 'TypedProcedure/dbo/IPMS_SP_BizTalk_TBL_CAP_DATA'
And this is the detailed ERROR :
Microsoft.ServiceModel.Channels.Common.MetadataException: Retrieval of Operation Metadata has failed while building WSDL at 'TypedProcedure/dbo/IPMS_SP_BizTalk_TBL_CAP_DATA' --->
System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.
A severe error occurred on the current command. The results, if any, should be discarded.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.Adapters.Sql.ExecutionHelper.ExecuteReader(SqlCommand sqlCommand, CommandBehavior commandBehavior, Double totalSeconds)
at Microsoft.Adapters.Sql.ExecutionHelper.ExecuteReader(SqlCommand sqlCommand, CommandBehavior commandBehavior, TimeoutHelper timeoutHelper)
at Microsoft.Adapters.Sql.SqlAdapterMetadataResolverHandler.ResolveOperationMetadata(SqlAdapterConnection sqlAdapterConnection, MetadataLookup metadataLookup, String operationId,
ISqlAdapterBindingProperties bindingProperties, TimeSpan timeout)
at Microsoft.Adapters.Sql.ASDKConnectionHandler.Microsoft.ServiceModel.Channels.Common.IMetadataResolverHandler.ResolveOperationMetadata(String operationId, TimeSpan timeout, TypeMetadataCollection&
extraTypeMetadataResolved)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetOperationMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.SearchBrowseNodes(MetadataRetrievalNode[] nodes, WsdlBuilderHelper helper, TimeoutHelper timeoutHelper)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceModel.Channels.Common.Design.AdapterExceptions.ThrowMetadataException(String errorMessage, Object arg, Object source, Exception innerException)
at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.SearchBrowseNodes(MetadataRetrievalNode[] nodes, WsdlBuilderHelper helper, TimeoutHelper timeoutHelper)
at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.GenerateOperationSchemas(WsdlBuilderHelper helper, MetadataRetrievalNode[] nodes, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.GetWsdl(MetadataRetrievalNode[] nodes, Uri uri, TimeSpan timeout)
at Microsoft.Adapters.Sql.SqlAdapterWsdlRetrieval.Microsoft.ServiceModel.Channels.Common.IWsdlRetrieval.GetWsdl(MetadataRetrievalNode[] nodes, Uri uri, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataExchanger.ProcessMetadataGet(Message message, Uri target, TimeSpan timeout, MetadataLookup metadataLookup)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataExchanger.ProcessMetadataMessage(Message message, Uri target, TimeSpan timeout, MetadataLookup metadataLookup, Message&
replyMessage)
at Microsoft.ServiceModel.Channels.Common.Channels.AdapterRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ServiceModel.Channels.IMetadataRetrievalContract.GetMetadata(MetadataRetrievalNode[] nodes)
at Microsoft.ServiceModel.Channels.Tools.MetadataSearchBrowse.MetadataPanel.GetWsdl(MetadataRetrievalNode[] nodes)
at Microsoft.ServiceModel.Channels.Tools.MetadataSearchBrowse.MetadataUserControl.GetWsdl()
Please help with the same.

Hi,
Are you using a temptable in your stored procedure? If so, FMTONLY flag is the cause for this error.
Please check this post to correct this:
http://thoughtsofmarcus.blogspot.com/2010/11/calling-stored-procedures-from-biztalk.html
Refer:
Error while generating WCF-Sql adapter metadata
Rachit
Please mark as answer or vote as helpful if my reply does

Similar Messages

Unable to get the data from ms sql stored procedures using crystal report 10

Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected]

Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected]

URGENT!! Generating XML in a PL/SQL stored proc

Hi,
I need to generate XML from a PL/SQL stored proc.
I need to do it in Oracle 7.3.4 as well as 8.1.6 databases.
I need to have my own defined tags in the xml.
Say I have the table Person like
Person (
id number,
fname varchar2(40),
lname varchar2(40)
I need a stored proc will will select * from Person and output the data in XML form as
<Person Names>
<Employee>
<First Name personid="<<value from id field>>">
<<value from fname field>>
</First Name>
<Last Name>
<< value from lname field>>
</Last Name>
</Employee>
</Person Names>
I want to minimise hard coding also.
how can I do this ? any pointers ?
Thanks in advance, Hari
null

Hi,
We are not having a Web Agent here. So i am unable to use PLSXML utility.
I installed XSU and is now able to create the XML, but with the table attribute names as the tags. So
1. Is there a way I can transform this XML to another XML with custom tags ( using an XSL ) in a PL/SQL procedure ?
2. Is there a way I can install and use PLSXML without the web agent ?
Thanks, Hari

Unable to use the values returned by a PL/SQL stored procedure in a XSQL page

Hi,
I've been messing around with XML and XSQL in particular. I was trying to write a xsql page to display a report with account totals...I have the following .xsql which calls a PL/SQL stored procedure :
<?xml version="1.0"?>
<xsql:query connection="pfcdm" xmlns:xsql="urn:oracle-xsql">
<xsql:set-session-param name="zasset_total" value="100">
<xsql:dml connection="pfcdm">
rraman.sp_vw_id(zasset_total,zinvm_total,zmkt_val);
</xsql:dml>
</xsql:set-session-param>
select 'Asset total is {@zasset_total}' as "ASSET_TOTAL" from dual
</xsql:query>
My procedure sp_vw_id returns the values that it should. But, I am not sure how to declare variables within a page, and to output the return values. There is very scanty documentation on the usage of <xsql:dml> or <xsql:ref-cursor-function>.
Any response would be greatly appreciated.
Thanks,
Raja

Here is the example from the Oracle9i (complete rewrite) of the XSQL Chapter in our Oracle documentation.
Question
I using <xsql:dml> to call a stored procedure which has one OUT parameter, but I was not able to see any results. The executed code results in the following statement:
<xsql-status action="xsql:dml" rows="0"/>
Answer
You cannot set parameter values by binding them in the position of OUT variables in this release using <xsql:dml>. Only IN parameters are supported for binding. You can create a wrapper procedure that constructs XML elements using the HTP package and then your XSQL page can invoke the wrapper procedure using <xsql:include-owa> instead.
For an example, suppose you had the following procedure:
CREATE OR REPLACE PROCEDURE addmult(arg1 NUMBER,
arg2 NUMBER,
sumval OUT NUMBER,
prodval OUT NUMBER) IS
BEGIN
sumval := arg1 + arg2;
prodval := arg1 * arg2;
END;You could write the following procedure to "wrap" it, taking all of the IN arguments that the procedure above expects, and then "encoding" the OUT values as a little XML datagram that you print to the OWA page buffer:
CREATE OR REPLACE PROCEDURE addmultwrapper(arg1 NUMBER, arg2 NUMBER) IS
sumval NUMBER;
prodval NUMBER;
xml VARCHAR2(2000);
BEGIN
-- Call the procedure with OUT values
addmult(arg1,arg2,sumval,prodval);
-- Then produce XML that encodes the OUT values
xml := '<addmult>'| |
'<sum>'| |sumval| |'</sum>'| |
'<product>'| |prodval| |'</product>'| |
'</addmult>';
-- Print the XML result to the OWA page buffer for return
HTP.P(xml);
END;This way, you can build an XSQL page like this that calls the wrapper procedure:
<page connection="demo" xmlns:xsql="urn:oracle-xsql">
<xsql:include-owa bind-params="arg1 arg2">
BEGIN addmultwrapper(?,?); END;
</xsql:include-owa>
</page>This allows a request like:
http://yourserver.com/addmult.xsql?arg1=30&arg2=45
to return an XML datagram that reflects the OUT values like this:
<page> <addmult><sum>75</sum><product>1350</product></addmult>
</page>

Added new parm to an existing SQL stored procedure CR 11 doesn't like it

Hi
I have added a new parameter to an existing SQL stored procedure (SQL 2000). This stored procedure is currently being called from a Crystal XI report. It prompts for a date which works great. (The report was created with this parameter). I added a new parameter to the stored procedure. When I do a preview in Crystal, it prompts for the new parameter, but is NULL when I look at the SQL query and it brings back no data. If I try to verify the database, it tells me that I am missing parameter @ProcessType (varchar(5))--(name of new parameter). I have physically added this parameter to the crystal report with the select expert and still no luck. I have already tried renaming the procedure but am unable to update datasource location because of this parameter. The report is very detailed and I do NOT want to create a new report.

Unfortunately, I have tried and retried to do this. Nothing changes. I usually would get a message like database has changed, proceeding to fix report. I don't get this. It merely tells me database is up to date and only returns the 1 parameter, yet when I go to the datasouce and try to update it, it tells me that I have not supplied the new parameter.
I have tried everything, from closing Crystal reports and then going so far as to reboot my machine, just in case their was some kind of caching going on.
I have even asked other people I work with to look at it to make sure I am not doing something dumb...

PL/SQL stored procedure?

Hi,
Is any body could help me to execute
an PL/SQL stored procedure via JDev3.1
(using Oracle conection, No JDBC).
Please provide sample code if possible?
Thanks in Advance.
Reza

Hi
you could use JPublisher Wizard in JDeveloper to generate Java Wrapper classes for pl/sql stored procedures.
check out the online demos http://technet.oracle.com/products/jdev/info/jdev/jpublisher/s000.html
Also there is information in the online doc.
Check the release notes for supported database versions.
raghu

Tables from different shema in pl/sql stored procedure

I whant to use table from another shema in my pl/sql stored procedure like this:
create procedure proc1(...) is
cursor c1 is
select * from scott.emp;
begin
end;
This generated error:
PLS-00201: identifier 'scott.emp' must be declared.
I try to use public synonym for scott.emp, but the same error is appear.
What can i do in this case?
Thanks.
null

Hi
You haven't rights to select scott.emp but there is no messages that 'You have not rights to select xxxx'. When you haven't rights for an objects it does not exists for you.
Regards
null

Error calling PL/SQL stored procedure

Hi,
I'm pretty new to JDeveloper having used NetBeans for the last few years.
I'm getting an error when trying to call a PL/SQL stored procedure. When I click on any of the oracle errors I get an "unable to find source file" message. The errors occurs in call.execute(). The error message and Java code are listed below. Any help is much appreciated.
Cheers,
Stevie
Errors:
Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String index out of range: 33
     at java.lang.String.charAt(String.java:558)
     at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java:877)
     at oracle.jdbc.driver.OracleSql.parse(OracleSql.java:811)
     at oracle.jdbc.driver.OracleSql.getSql(OracleSql.java:284)
     at oracle.jdbc.driver.OracleSql.getSqlBytes(OracleSql.java:538)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:169)
     at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:873)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3093)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4286)
     at oracle.CallPLSQL.callLMO(CallPLSQL.java:118)
     at oracle.TestHarness.main(TestHarness.java:18)
Jave Code:
package oracle;
import java.sql.CallableStatement;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
import java.sql.Types;
public class CallPLSQL {
private Connection conn;
public CallPLSQL() {
*Constructor.
try {
//Register Oracle Database Drive
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
//set connection
String connectionString="jdbc:oracle:thin:TSD/TSD@DEV:1526:DEVELOP";
this.setConn(DriverManager.getConnection(connectionString,"TSD", "TSD"));
} catch (SQLException ex) {
public int callproc () throws SQLException {
CallableStatement call;
String callString = "{call proc" +
call = conn.prepareCall(callString);
call.setInt(1, 120289);
call.setInt(2, 2008);
call.registerOutParameter(3, Types.INTEGER);
call.registerOutParameter(4, Types.INTEGER);
call.registerOutParameter(5, Types.INTEGER);
call.registerOutParameter(6, Types.DATE);
call.registerOutParameter(7, Types.VARCHAR);
call.registerOutParameter(8, Types.INTEGER);
call.registerOutParameter(9, Types.INTEGER);
call.execute();
int i = call.getInt("app_id");
return i;
public void setConn(Connection conn) {
this.conn = conn;
public Connection getConn() {
return conn;
}

I've fixed it now. I'd missed a } in prepareCall. What a doughball.

MS SQL Stored Procedure problem

Hi,
I am using BO XI R2, Crystal Report XI and MS SQL Database.
I found a strange error when generating the report using my java application if the crystal report is using MS SQL stored procedure. The error encountered :
com.crystaldecisions.sdk.occa.managedreports.ras.internal.a: Cannot open report document. --- Custom table prefix specified in the InfoStore does not exist. This is a configuration problem. Please contact your system administrator.
cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Custom table prefix specified in the InfoStore does not exist. This is a configuration problem. Please contact your system administrator.---- Error code:-2147467259 Error code name:failed
detail:Cannot open report document. --- Custom table prefix specified in the InfoStore does not exist. This is a configuration problem. Please contact your system administrator.
This is when the code executed is:
reportClientDocument = reportAppFactory.openDocument(report, 0, Locale.ENGLISH);
If the report does not use the stored procedure, it's ok.
If i run the report (with stored procedure) from CMC using the default table prefix (in database config tab), it's able to generate the report.
If i select custom table prefix and specify the custom table prefix value with the same value as in the default table prefix, it could not generate the report and error stated that the table could not be found.
Please enlighten me if you have use MS SQL database for reporting with BO XI R2.
Thanks.

That means it's not a SDK-specific error.
Once it's resolved in InfoView, it'll likely be resolved with your app.
You might want to open a support case with SAP.
Sincerely,
Ted Ueda

Very Odd PL/SQL Stored Procedure Behavior

I'm writing a jsp/struts front-end for a legacy app that makes extensive use of stored procedures. I've sucessfully created a login page, a search page, and a master record detail/edit page. On the master record detail there are a series of subordinate data grids, each with links to individual pages for record editing.
If I edit the master record and click my save button (a commit action), the appropriate stored proc is called and everything works as it should.
BUT, if I click on the edit link to a subordinate table, I am taken to the screen, I can make changes, and when I click save (another commmit event) the stored procedure for that table is not called. No errors, the struts action takes me back to the previous screen (correctly), but nothing is saved.
The weird part is, once I've returned to the master record page, if I edit the master record and click the same save button as before, the stored procedure for the subordinate table that I had just looked at is fired.
I know my struts actions are correct, since the pages navigate correctly (at least, I 'think' I know that). I used the same code in the EO Impl to set up my call to the stored procs.
Does anybody have ANY idea what might be causing this? I'm lost and confused at this point.
(EO Impl Code below)
/*doesn't print dodml until I click save on the master record...this is the code for the child. */
protected void doDML(int operation, TransactionEvent e)
System.out.println("dodml");
switch (operation) {
case DML_INSERT: {
callInsertExternalNumber("I");
break;
case DML_UPDATE: {
callInsertExternalNumber("U");
break;
void callInsertExternalNumber(String function) {
CallableStatement st = null;
try {
System.out.println("calling stored proc");
String stmt = "BEGIN mySchema.InsertNumber(?,?,?,?,?,?,?); END;";
DBTransaction tr = getDBTransaction();
st = tr.createCallableStatement(stmt,1);
if (getExternalKey() != null) {
st.setLong(1,getExternalKey().longValue());
...etc. etc. The calling stored proc doesn't get printed until I click save on the master record.

Hi
you could use JPublisher Wizard in JDeveloper to generate Java Wrapper classes for pl/sql stored procedures.
check out the online demos http://technet.oracle.com/products/jdev/info/jdev/jpublisher/s000.html
Also there is information in the online doc.
Check the release notes for supported database versions.
raghu

Why doesn't SSRS like an IF Statement in my SQL Stored Procedure???

I have multiple IF Statements at the end of my SQL Stored Procedure Process that utilizes a @ReportTypeName Parameter to produce the chosen report result set
IF @ReportTypeName = 'HMO-POS New To HFHP - No Prior Year Member Spans'
BEGIN
SELECT DISTINCT
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Contract Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Subscriber Member Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Pkg],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Division Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EFF DATE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER FIRST NAME],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER LAST NAME],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Broker Name],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ADDRESS 1],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER CITY],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER STATE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ZIPCODE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE1],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE2],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE3],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EMAIL],
CONVERT(VARCHAR,CAST(CONVERT(VARCHAR, [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH]) AS DATETIME),101) AS [INDV MEMBER BirthDate],
FLOOR((CAST (GETDATE() AS INTEGER) - CAST(CONVERT(DATETIME, CONVERT(CHAR(8), [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH])) AS INTEGER)) / 365.25) AS [INDV MEMBER AGE]
FROM [#TempTable_Distinct_Individual_Member_All_Info]
WHERE (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] NOT IN
(SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans])
ORDER BY [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
END
IF @ReportTypeName = 'HMO-POS Renewals'
BEGIN
SELECT DISTINCT
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Contract Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Subscriber Member Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Pkg],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Division Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EFF DATE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER FIRST NAME],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER LAST NAME],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Broker Name],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ADDRESS 1],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER CITY],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER STATE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ZIPCODE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE1],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE2],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE3],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EMAIL],
CONVERT(VARCHAR,CAST(CONVERT(VARCHAR, [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH]) AS DATETIME),101) AS [INDV MEMBER BirthDate],
FLOOR((CAST (GETDATE() AS INTEGER) - CAST(CONVERT(DATETIME, CONVERT(CHAR(8), [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH])) AS INTEGER)) / 365.25) AS [INDV MEMBER AGE]
FROM [#TempTable_Distinct_Individual_Member_All_Info]
INNER JOIN [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]
ON [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR] = [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
WHERE (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
ORDER BY [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
END
Microsoft Visual Studio and SQL Server Reporting Services did not like this! When I added my dataset and parameters accordingly, my Dataset had no fields...almost as if running the Stored Procedure in the background to get its Metadata was not working. I
know this works because I tested it as a result of a straight EXEC Command. Why doesn't Microsoft Visual Studio and SQL Server Reporting Services not like this IF? I did end up getting around this by parameterizing the WHERE clause based on the @ReportTypeName
chosen.
WHERE (@ReportTypeName = 'HMO-POS New To HFHP - No Prior Year Member Spans'
AND (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] NOT IN
(SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]))
OR (@ReportTypeName = 'HMO-POS Renewals'
AND (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] IN
(SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]))
I appreciate your review and am hopeful for a reply.
Thanks!

Hi ITBobbyP,
I have tested on my local environment and can reproduce the issue, the issue can be caused by the temp table you are using which will also cause the data not display.
I have use below sample table and record to have a test and details information below for your reference:
Right click the DataSet to select the "DataSet Properties" and click the query designer to execute the stored procedure by click the "!" to check if you can get the data:
If you got some error, the issue can be cause by the temp table invalid, so please make sure you have add the query to create and insert recored to temp table like below:
CREATE PROCEDURE vickytest0311_1
@ReportTypeName nvarchar(50)
AS
create table #VickyTest
column1 int,
column2 varchar(20)
insert into #VickyTest values (1,'Test1')
insert into #VickyTest values (2,'Test2')
insert into #VickyTest values (3,'Test3')
IF @ReportTypeName ='Test1'
BEGIN
select * from #VickyTest
where Column1=1
END
IF @ReportTypeName ='Test2'
BEGIN
select * from #VickyTest
where Column1=2
END
GO
3. I recommend you to not use the temp table and you will not need to add the create and insert statement in the stored procedure.
4. If you still got no data, please try to click the "Refresh fields" as below:
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

PL/SQL Stored procedures vs C# code.

Hi All
We are going to start designing a kind of transactional application with huge volume of data (150 million records per month). Our selected DB engine is Oracle 10.g while C# is selected development language.
Because of big volume of data performance is one of the most important factors for us, and the technical design should gain the best level of performance.
What i'm looking for and studing for it is to define which kind of operation shall be done by Stored Procedure which will be written by PL/SQL or by C# classes?
I don't interested in to handle complicated and complex jobs using PL/SQL stored procedures while the performance really deserve it.

Hello,
Well, my philosophy is to leverage the database as much as possible. I have worked with applications that had no "select", "insert", "update" or "delete" statements in them. Instead, stored procedures and functions inside of PL/SQL packages and bodies were used. Some people will argue strongly against that, but I belong to the "thick database" group rather than the "the database is just a persistence layer that I have to deal with" group. To me it makes sense to co-locate the code that works on the data with the data. If you are working with large volumes of data, I find the bulk operations available via PL/SQL to be very handy.
Here's an AskTom thread that deals with this general issue:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:12083187196917
Whilst the thread is primarily about Java, you can substitute just about any other language and the meaning will still carry over.
Regards,
Mark

How to bind arrays to PL/SQL stored procedure using OCI?

Hi,
We are having problems trying to bind arrays to PL/SQL stored procedure using OCI. Here is the situation:
- We have a stored procedure called "GetVEPFindTasks" with the following interface:
PROCEDURE GetVEPFindTasks (
p_ErrorCode OUT NUMBER,
p_ErrorMsg OUT VARCHAR2,
p_RowCount OUT NUMBER,
p_VEPFindTasks OUT t_VEPFindTaskRecordTable,
p_MaxTask IN NUMBER);
t_VEPFindTaskRecordTable is a record with the following entries:
TYPE t_VEPFindTaskRecord IS RECORD (
RTCID NUMBER,
TransNum NUMBER,
TransTimestamp VARCHAR2(20),
Pathname1 image_data.pathname%TYPE,
Pathname2 image_data.pathname%TYPE,
Pathname3 image_data.pathname%TYPE,
OperatorID operator.id%TYPE);
- Now, we are trying to call the stored procedure from C++ using OCI (in UNIX). The call that we use are: OCIBindByName and OCIBindArrayOfStruct to bind the parameters to the corresponding buffers. We bind all parameters in the interface by name. Now, we do bind the record's individual item by name (RTCID, TransNum, etc.), and not as a record. I don't know if this is going to work. Then, we use the bind handles of the binded record items (only record items such as RTCID, TransNum, and NOT error_code which is not part of the record) to bind the arrays (using OCIBindArrayOfStruct).
All of the parameters that are binded as arrays are OUTPUT parameters. The rest are either INPUT or INPUT/OUTPUT parameters. Now, when we try to execute, OCI returns with an error "Invalid number or types of arguments" (or something to that sort... the number was something like ORA-06550). Please help...
Is there any sample on how to use the OCIBindArrayOfStruct with PL/SQL stored procedures? The sample provided from Oracle is only for a straight SQL statement.
Thank's for all your help.
** Dannil Chan **

As you said:
You have to pass in an array for every field and deconstruct/construct the record in the procedure. There is no support for record type or an array of records. Can you give me a example? I'am very urgently need it.
thanks
email: [email protected]

Creating XML report using PL/SQL Stored Procedure

Hi Friends,
I am working on an xml report with the xml source as PL/SQL Stored Procedure.
I am referring the exercise shown in the following link to understand the process:
   http://orclapp.blogspot.com/2012/02/developing-xml-publisher-report-using.html
In the example shown in the above link I could not understand the following:
1) In the following procedure, the out parameter 'retcode' is not used at all.
   What is the importance of this parameter.
    PROCEDURE REPORT (errbuf OUT VARCHAR2, retcode OUT VARCHAR2, p_product_id   IN     NUMBER)
2) After the xml data is prepared and put to 'l_result' Clob variable, the following
    Loop is executed. I am not able to appreciate why the following loop is required.
     LOOP
         EXIT WHEN l_length = l_retrieved;
         IF (l_length - l_retrieved) < 32000
         THEN
            SELECT SUBSTR (l_result, l_retrieved + 1) INTO l_xmlstr FROM DUAL;
            l_retrieved := l_length;
            fnd_file.put_line (fnd_file.output, l_xmlstr);
         ELSE
            SELECT SUBSTR (l_result, l_retrieved + 1, l_offset)
              INTO l_xmlstr
              FROM DUAL;
            l_retrieved := l_retrieved + l_offset;
            fnd_file.put_line (fnd_file.output, l_xmlstr);
         END IF;
     END LOOP;
3) In the example it is not explained how the concurrent program gets the xml data?
   I assume it is written to a file using the following line of code:
    fnd_file.put_line (fnd_file.output, l_xmlstr);
   I would appreciate if anyone can throw some light into my above queries so that I can understand the process clearly.
Thanks & Regards
Hawker

Hi 32000 in the code is a 'safe' size smaller than the max available 32767, the loops purpose is to move through the entire thing in chunks that will be manageable in the limits of the data type.
Btw; if you are in Oracle e-business suite then you can also use Oracle reports very simply to create XML output.
If you have reports developer all you need to do is put raw sql (without any 'artifice' to create XML) in the report SQL and then set the reports output to XML in the program definition in Oracle e-business.
best regards,
Robert.

How to send a Varying Array param to a PL/SQL Stored Procedure from Java

* I am VERY new to jdbc, and even somewhat new to Java
* I'm using Java 1.5, Oracle 10g.
* I need to call the following PL/SQL Stored Procedure from Java:
procedure setEventStatus
i_deQueueStatus in deQueueStatus_type
*deQueueStatus_type is the following (an array of deQueueStatus_OBJ):
CREATE OR REPLACE TYPE deQueueStatus_OBJ as object
eventID number (20),
dequeuestatus varchar2(20)
CREATE OR REPLACE TYPE deQueueStatus_TYPE IS VARYING ARRAY(500) of deQueueStatus_obj
*I have created a Java object as follows:
public class EventQueueDeQueueStatus
     long      eventID;
     String      dequeueStatus;
     EventQueueDeQueueStatus(long eventID, String dequeueStatus)
          this.eventID = eventID;
          this.dequeueStatus = dequeueStatus;
I have an ArrayList of these.
I need to pass this list to the Stored Procedure. How do I create a java.sql.Array so I can call CallableStatement.setArray to set the parameter? Or do I use something else? I have tried setObject with both the ArrayList and also with a primitive array, but got "Invalid Column Type" both times.
Any help would be greatly appreciated. I just got this task today, and I have to make it work by Tuesday :-( !
Thanks,
Kathy

Kathy,
Search the archives of this forum and the JDBC forum for the terms STRUCT and ARRAY and you can find some sample code on the JDBC How-To Documents page and the JDBC Samples which can both be accessed from this page:
http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Good Luck,
Avi.

Unable to generate schema by consuming wcf sql stored procedure

Similar Messages

Maybe you are looking for