Unable to generate the source while having xsdconfig file
Hello All,
I am trying to generate the source using ant script and I have a .xsdconfig file
in the same folder as the XSDs. I am getting the following error:
[xmlbean] error: Document /home/xsd/Development/config.xsdconfig is not an xsd
config
file
I am attaching the .xsdconfig file just in case if you want to see what I am doing.
Help appreciated.
Thanks in advance.
Kiran
[config.xsdconfig]
Hi Kiran,
Did you get the solution to your problem...
I am getting the same problem
Please help
Regards
Manish Jain
"Kiran" <[email protected]> wrote:
>
>
>
Hello All,
I am trying to generate the source using ant script and I have a .xsdconfig
file
in the same folder as the XSDs. I am getting the following error:
[xmlbean] error: Document /home/xsd/Development/config.xsdconfig is not
an xsd
config
file
I am attaching the .xsdconfig file just in case if you want to see what
I am doing.
Help appreciated.
Thanks in advance.
Kiran
Similar Messages
-
Intercompany balancing was unable to generate the intercompany account in AP
Dear all,
I have an invoice in AP the status is validated but not accounted.
I am having the following message
"Intercompany balancing was unable to generate the intercompany account. Please check the intercompany balancing rules setup"
I have followed the steps in doc id 749579.1 but the issue has not been resolved.
Grateful if anyone can provide me with a quick solution since this is preventing a period closure and the preparation of final accounts.
ThanksUnable to access the file, which is uploaded to SR.
Please provide some of the error in Create Accounting file along with journal entry.
Check whether the code comabination of intercompany journal line, which create accounting is trying to create to balance the balancing segment is valid or not.
By
Vamsi -
Create Acctg Error: Intercompany balancing was unable to generate the inter
hi,
12.0.4
Issue:
There is an error in Create Acctg. of Cost management due to intercompany balancing was unable to generate the intercompany account. Please check the intercompany balancing rules setup.
Ledger Star Appliance Center, Inc.
Application Accounting Definition Cost Management
Error Message
Intercompany balancing was unable to generate the intercompany account. Please check the intercompany balancing rules setup.
Ct uses Oracle AAD and are valid.
Ct had the same offset account processed in other transactions and posted to GL, but some others have not been processed.
The period close subledger exception report show that 17 events are unprocessed with error 0:
0 Intercompany balancing was unable to generate the intercompany account. Please check the intercompany balancing rules setup.
Offset 037.0249.1350.6005500.0000.8888.000000.000000
Please advise how ct can process these 17 events in error.
https://support.us.oracle.com/oip/faces/filedownloadservlet?ObjectType=SR&ObjectNo=3-5288562551&FileName=Create_Acctg_Output_Jan28_with_error.doc
Thanks
Jayashree
Edited by: user763208 on 22/02/2012 19:36Unable to access the file, which is uploaded to SR.
Please provide some of the error in Create Accounting file along with journal entry.
Check whether the code comabination of intercompany journal line, which create accounting is trying to create to balance the balancing segment is valid or not.
By
Vamsi -
Unable to read the source URL error for cffeed
Hi,
I am using the cffeed to read from my twitter RSS feed but I get this error:
Unable to read the source URL.
Status Code: 400. Try adding or changing UserAgent attribute in the CFFeed tag
My code is:
<cfset feedurl="http://twitter.com/statuses/user_timeline/somenumbers.atom" />
<cffeed
source="#feedurl#"
properties="feedmeta"
query="feeditems1" overwrite="true" />
It works but suddenly it stops and it takes time about 15 minutes or more to work again.
Can any body help me with this?
Thanks,
MandanaOne thing which I did not mentioned is I want to have 6 pages rss feed together and I made it like this:
<cffeed
source="#feedurl1#"
properties="feedmeta"
query="feeditems1" overwrite="true"
useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)" />
<cffeed
source="#feedurl2#"
properties="feedmeta"
query="feeditems2" overwrite="true"
useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)"/>
I did it for 6 pages, each one with one cffeed and then:
<cfquery name="feeditemstotal" dbtype="query">
select * from feeditems1
union
select * from feeditems2
union
select * from feeditems3
union
select * from feeditems4
union
select * from feeditems5
union
select * from feeditems6
</cfquery> -
Hi,
Can anyone advice on below issue?
ERROR: The program is unable to generate the add-on queue due to missing add-ons or Support Packages.
Add the missing Support Packages or repeat the current step and change the add-on selection.
Missing Support Package(s):
Correction
Component
IW_FNDGC
I have manually download these components which is SAPK-10001INIWFNDGC and SAPK-10002INIWFNDGC and put it in the download directory and repeat the phase.
Besides, I also checked that these 2 components were inside EPS/in folder CSN0120061532 0083837 PAT and CSN0120061532 0079648 PAT
Thanks and regards,
Shu JieHi Shu Jie,
you can't delete already installed add-ons. Please refer to note #1569624:
It is not possible to uninstall GATEWAY 2.0
Before you install the GATEWAY 2.0, keep in mind that you cannot uninstall ABAP add-ons.
The add-on GW CORE will be merged in IW_FNDGC. This information can also be found in above note:
Please
note:
GW_CORE 200 is not released for SAP_BASIS 740.
The successor is IW_FNDGC 100.
There are two possible reason for your error:
The stackfile is not well configured.
Your SUM is not the very latest one. SUM SP10 contained a bug in its first patch levels which shows retrofitted components in IS_SELECT.
Cheers,
Andreas -
S067- Credit Exposure for customer- Unable to find the source
Hi Experts,
For a customer, we could see a credit exposure of X amount in FD33 and S067 shows a open delivery credit value shows the same X amount.
The issue is i am not seeing any open delivery or sales order for that customer. i am Unable to find the source of this credit exposure amount.
What can be the other possibilities for the credit exposure to show the X amount? kindly advise.
Thanks,
SudhaharNDear Sudhahar Narasi,
First check this path for getting the "open delivery documents"
FD32->Environment->Sales and distribution documents->Open deliveries and open billings.
FD32->Environment->Reporting->Credit master sheet.
By help of these views you will be knowing exact cause for that issue.
Check and revert
Thanks&Regards
Raghu.k -
SDN: Generate the source list by contract automatically
Hi Experts,
please help !!!!!can't find an answer !
I want to set a background job of ME05 to generate the source list by contract automatically, but it seems not work. Is there anyone who knows how to set the job of ME05? Or any other way to generate the source list by contract automatically? Many thanks.Dear Elena,
You can create source list automatically from an Outline aggrement.For thsi on the outline agreement overview screen , select an item for which you wish to enter source list record & choose Item --> Maintain source list.If you have not maintained a plant in the outline agreement line item, you must enter the plant for each source list record.
Also for creating source list automatically path is
SAP Menu> Logistic > Material management > Purchasing>master data > Source list
This will solve your problem.
Reward if useful
Vivek Maitra -
Generate the source list by contract automatically
Hi All,
I want to set a background job of ME05 to generate the source list by contract automatically, but it seems not work. Is there anyone who knows how to set the job of ME05? Or any other way to generate the source list by contract automatically? Many thanks.hi Darcy! happy new year!!!
did you find an answer re ME05 by contract? where to find note 34349?
thanks,
Elena -
Generating the .CAP, .JCA and .EXP files.
Hello;
I have downloaded the java_card_kit-2_1_2 to ‘C:\java_card_kit-2_2_1", and I tried to compile HelloWorld application that shipped with its distribution. I was successfully able to compile the file HelloWorld.java, but I am having lots of problems in generating the .CAP, .JCA and .EXP files.
I tried to follow the instructions in jcdk2.2.1 user guide, but of no use.
This is what I am basically doing:
_Step1) Setting my Environment Variables as follows:_
*set JC_HOME=C:\java_card_kit-2_2_1*
*set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_16*
*set PATH=.;%JC_HOME%\bin;%JAVA_HOME%\bin;%PATH%*
_Step2) Compile the java file_
The package of HelloWorld.java is : src.com.sun.javacard.samples.HelloWorld, so to compile I use the following command line:
*javac -g -target 1.1 -source 1.3 -classpath .\classes;..\lib\api.jar;..\lib\installer.jar src\com\sun\javacard\samples\HelloWorld\*.java*
_Step3) Converting_
I have the class file generated in the package folder: src.com.sun.javacard.samples.HelloWorld, I generated an .opt file as follows:
+-out EXP JCA CAP+
+-exportpath .+
+-debug+
+-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1 src.com.sun.javacard.samples.HelloWorld.HelloWorld+
+src.com.sun.javacard.samples.HelloWorld 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0+
Finally, the command line for conversion is:
*set _CLASSES=%JC_HOME%\lib\apduio.jar;%JC_HOME%\lib\apdutool.jar;%JC_HOME%\lib\jcwde.jar;%JC_HOME%\lib\converter.jar;%JC_HOME%\lib\scriptgen.jar;%JC_HOME%\lib\offcardverifier.jar;%JC_HOME%\lib\api.jar;%JC_HOME%\lib\installer.jar;%JC_HOME%\lib\capdump.jar;%JC_HOME%\samples\classes;%CLASSPATH%;*
*"%JAVA_HOME%\bin\java" -classpath %_CLASSES% com.sun.javacard.converter.Converter -config src\com\sun\javacard\samples\HelloWorld\HelloWorld.opt*
After successfully executing all these lines, I get the following error:
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
*+error: class HelloWorld does not belong to package src.com.sun.javacard.samples.HelloWorld.+*
conversion completed with 1 errors and 0 warnings.
PLEASE HELP! I also tried adding -classdir to the opt file, but still did not work.
The whole point behind this exercise is to import a javacard framework of version 1.0
Really appreciate anyone's help! Thanks in advance.Thank you Shane, but my claSs file is indeed saved in "C:\java_card_kit-2_2_1\samples\src\com\sun\javacard\samples\HelloWorld"
Now since I am running my command lines from C:\java_card_kit-2_2_1\samples, so I guess that the class directory is:
src.com.sun.javacard.samples.HelloWorld
Right? -
Unable to view the contents in NQS Config file
Hi Forum,
After I successfully install the OBI EE 10.1.3 Application, I am unable to view the contents in NQS Config file. It is opening in Notepad with error showing as "The filename, directory name or volume label syntax is incorrect."
So please guide me in resolving this issue.
Regards
Cool jYou probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.
-
Problem in generating the Oracle report6i to PDF file.
Hi guys,
I had encounter problem in generating the Oracle report6i to PDF file. The Amount column once the report is genrated to PDF it double the amount reflected in the PDF file report. See sample scenarios below:
Can anybody help me explain this issue how it really happens?
Example:
FROM ORACLE REPORTS6i :
ITEM # PRODUCT AMOUNT
1 PRINTER 5,000
2 KEYBOARD 2,000
TO PDF FILE :
ITEM # PRODUCT AMOUNT
1 PRINTER 10,000
2 KEYBOARD 4,000
Thank you.
LalaHi "LawlordsX",
I do understand the issue, something seems to have messed up the Shell Extensions on the 2 Lenovo laptops you talked about.
Could you please check if the 2 m/c(s) have an additional version of Office installed in parellal to Office 2007, say Office 2010 trial pre-installed on them. This can be verified via CONTROL PANEL > PROGRAMS AND FEATURES > Check for the versions of Office installed. If yes, please let me know the additional Office software version/type.
Also, could you be more specific about the bitage of the system, i.e. whether the Windows 7 m/c is 32-bit or 64-bit?
This can be checked from CONTROL PANEL > SYSTEM > Under "System" section check for "System Type".
If converting multiple files at a time to PDF is an issue, as an alternate you could use FILE > CREATE > BATCH CREATE MULTIPLE FILES to workaround the problem for the time being.
Thanks! -
Approach for generating a report while having Func Specs of the Report
Hi Experts,
Please tell me what should be the approach for generating a report when having Func Specs of the Report.
Thnx
SidHi,
1st you need to know the business need and related data.
1st know that according to the business need is there any standard SAP report is there or not.
try to know the Data base table and related fields required according to the need.
know the relations of the data base tables to map the data.
Accordingly prepare Technical spec's or go a head for coding.
Thanks.
If this helps you reward with points. -
Unable to connect the server, while open the rpt file in server from java.
Hi,
I have written one java class, that class deployed in solaris server. The BO server is avilable in another solaris server. i want to convert the rpt file to pdf format. for that i try to give the file path to the server for opening the rpt file, that time i got the follwoing error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
Unable to connect to the server: uinbrdcsap02. --- Connection refused
(errno:239)---- Error code:-2147217387 Error code name:connectServer
at
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwR
eportSDKServerException(Unknown Source)
at
com.crystaldecisions.proxy.remoteagent.TCPIPCommunicationAdapter.connect
(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.z.a(Unknown Source)
at
com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Un
known Source)
at
com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initia
lize(Unknown Source)
*My java code is the following ..*
package com.ramco.report;
//Crystal Java Reporting Component (JRC) imports.
import java.io.File;
import java.io.FileInputStream;
import java.io.ByteArrayInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.ByteArrayOutputStream;
import java.sql.Connection;
import java.sql.CallableStatement;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.text.SimpleDateFormat;
import com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat;
import com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions;
import java.util.Calendar;
import java.util.Properties;
import org.apache.log4j.Logger;
import org.apache.log4j.SimpleLayout;
import org.apache.log4j.FileAppender;
import java.net.InetAddress;
import java.net.UnknownHostException;
// Class file starting.
public class StandardReconReport
private Connection objConnection = null;
private DBConnection dbconnection = null;
private ByteArrayInputStream byteArrayInputStream =null;
private FileOutputStream fileOutputStream = null;
private ByteArrayOutputStream byteArrayOutputStream = null;
private CallableStatement callablestatement = null;
private CallableStatement callablestatement1 = null;
private ResultSet resultset1 = null;
private ResultSet resultset = null;
private String Deal_No = null;
private String Job_Date = null;
private String Reportservername = null;
private SimpleLayout layout = null;
private FileAppender appender = null;
private Logger logger = null;
private String DateTimeFormat = null;
private String Report_File_path =null;
private String Pdf_File_Name = null;
private Properties properties = null;
private String LogFilePath = null;
private String FileName = null;
private String FullLogFilePath = null;
private Statement statement = null;
private String Report_upload_path = null;
private String StanReconDir = null;
private String winandsol = null;
private com.crystaldecisions.sdk.occa.report.application.ReportClientDocument reportClientDoc = null;
private int count_tmp=0;
private String DATE_FORMAT = null;
private String dateformat = null;
private Calendar cal = null;
private SimpleDateFormat sdf = null;
private String reconfilename = null;
// Method for Generating Report.....
private void stanReportGeneration()
try
properties = new Properties();
properties.clear();
properties.load(new FileInputStream("GeneralInfo.properties"));
Reportservername = properties.getProperty("reportservername");
reconfilename = properties.getProperty("reconfilename");
layout = new SimpleLayout();
LogFilePath = properties.getProperty("logfilepath");
dateformat = dateTime1(properties.getProperty("dateformat1"));
StanReconDir = properties.getProperty("stanrecondir");
winandsol = properties.getProperty("windowsandsolaris");
if (new File(LogFilePath).exists())
LogFilePath = LogFilePathdateformatwinandsol;
if (new File(LogFilePath).exists())
else
new File(LogFilePath).mkdirs();
FileName = "STANRECONLOGFILE-";
FileName = FileNamedateformat".txt";
FullLogFilePath = LogFilePath+FileName;
appender = new FileAppender(layout,FullLogFilePath,false);
logger = Logger.getLogger("MyLogger");
logger.addAppender(appender);
DateTimeFormat = properties.getProperty("datetimeformat");
logger.info("The Start Recon Report Start Time: " +dateTime(DateTimeFormat));
logger.info("");
try
InetAddress address[] = InetAddress.getAllByName(Reportservername);
for (int i=0; i<address.length;i++)
logger.info("Report Server Name: " + address<i>.getHostName());
logger.info("Report Server Address: " + address<i>.getHostAddress());
logger.info("Report Server Canonical: " + address<i>.getCanonicalHostName());
catch (UnknownHostException e)
logger.error("The host "Reportservername"is not avilable");
Report_File_path = properties.getProperty("StandardReconReportpath");
logger.info("The Report File Name is : "+Report_File_path " - "dateTime(DateTimeFormat));
//Report_File_path="rassdk://"+Report_File_path;
try
//Getting the Database connection....
dbconnection = new DBConnection();
objConnection = dbconnection.getConnections();
statement = objConnection.createStatement();
String sqlQuery = "SELECT TRIM(PARAM_VALUE) FROM SYS_USER_PARAM WHERE COMPONENT = 'REPORT' AND LINE_NO = 1 AND PARAM_NAME = 'REPORT_DOWNLOADPATH' AND STATUS = 'A'";
resultset = statement.executeQuery(sqlQuery);
while(resultset.next())
Report_upload_path = resultset.getString(1);
logger.info("Report_upload_path from the DB: "+Report_upload_path);
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch(Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(statement!=null)
statement.close();
if(resultset!=null)
resultset.close();
if (new File(Report_upload_path).exists())
Report_upload_path = Report_upload_path+StanReconDir;
if (new File(Report_upload_path).exists())
System.out.println("Directory is avilable"+Report_upload_path);
else
new File(Report_upload_path).mkdirs();
Report_upload_path = Report_upload_pathwinandsoldateformat+winandsol;
if (new File(Report_upload_path).exists())
else
new File(Report_upload_path).mkdirs();
logger.info("Report_upload_path : "Report_upload_path" : "+dateTime(DateTimeFormat));
try
logger.info("Calling the REPORT_STAN_RECON_CON SP : "+dateTime(DateTimeFormat));
callablestatement = objConnection.prepareCall("{call REPORT_STAN_RECON_CON(?)}");
callablestatement.registerOutParameter(1, oracle.jdbc.driver.OracleTypes.CURSOR);
callablestatement.execute();
resultset=(ResultSet)callablestatement.getObject(1);
if(resultset!=null)
while(resultset.next())
count_tmp = count_tmp+1;
logger.info("");
Deal_No = resultset.getString(1);
Job_Date = resultset.getString(2);
DATE_FORMAT = resultset.getString(3);
Job_Date = Job_Date.substring(0,10);
logger.info("*********** PDF Convertion Starting for a Deal No: " +Deal_No " :: "dateTime(DateTimeFormat));
Pdf_File_Name = Report_upload_pathreconfilenameDeal_No"-"DATE_FORMAT+".pdf";
Job_Date = Job_Date.replace('-', '/');
logger.info("The Deal_No is : "+Deal_No " - "dateTime(DateTimeFormat));
logger.info("The Job_Date is : "+Job_Date " - "dateTime(DateTimeFormat));
try
reportClientDoc = new com.crystaldecisions.sdk.occa.report.application.ReportClientDocument();
reportClientDoc.setReportAppServer(Reportservername);
logger.info("Report App server Name := "+ reportClientDoc.getReportAppServer());
logger.info("Report_File_path := "+ Report_File_path);
reportClientDoc.preCreateServerAgent(true);
reportClientDoc.open(Report_File_path,0);
logger.info("After opening the RTF file for : "+Deal_No " Deal_No - "dateTime(DateTimeFormat));
callablestatement1 = objConnection.prepareCall("{call REPORT_STANDARD_RECON(?,?,?,?)}");
callablestatement1.setString(1, Job_Date);
callablestatement1.setString(2, Deal_No);
callablestatement1.setString(3,"");
callablestatement1.registerOutParameter(4, oracle.jdbc.driver.OracleTypes.CURSOR);
callablestatement1.execute();
resultset1=(ResultSet)callablestatement1.getObject(4);
String tableAlias = reportClientDoc.getDatabaseController().getDatabase().getTables().getTable(0).getAlias();
reportClientDoc.refreshReportDocument();
reportClientDoc.getDatabaseController().setDataSource(resultset1, tableAlias , "Result Set");
reportClientDoc.refreshReportDocument();
ExportOptions oExportOptions = new ExportOptions();
oExportOptions.setExportFormatType(ReportExportFormat.RTF);
byteArrayInputStream = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
logger.info("After exporting the report file to PDF file for the : "+Deal_No " Deal_No - "dateTime(DateTimeFormat));
//Use the Java I/O libraries to write the exported content to the file system.
byte byteArray[] = new byte[byteArrayInputStream.available()];
//Create a new file that will contain the exported result.
logger.info("Successfully exported report to " + Report_File_path" - "dateTime(DateTimeFormat));
logger.info("*********** PDF Convertion Ending for a Deal : "Deal_No" "+dateTime(DateTimeFormat));
logger.info("");
Deal_No = null;
Job_Date = null;
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (IOException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(byteArrayInputStream!=null)
byteArrayInputStream.close();
if(byteArrayOutputStream!=null)
byteArrayOutputStream.close();
if(fileOutputStream!=null)
fileOutputStream.close();
if(callablestatement1!=null)
callablestatement1.close();
if(resultset1!=null)
resultset1.close();
if(reportClientDoc!=null)
reportClientDoc.close();
if(count_tmp==0)
logger.info("");
logger.info(" $$$$$$$$ There is NO DATA for generating the Report $$$$$$$: " +dateTime(DateTimeFormat));
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(callablestatement!=null)
callablestatement.close();
if(resultset!=null)
resultset.close();
if(objConnection!=null)
objConnection.close();
if(callablestatement1!=null)
callablestatement1.close();
if(resultset1!=null)
resultset1.close();
catch (IOException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
properties.clear();
logger.info("");
logger.info("*******Standard Recon Report End Time*******: "+dateTime(DateTimeFormat));
// Getting the current date and time..
public String dateTime(String dateFormat)
cal = Calendar.getInstance();
sdf = new SimpleDateFormat(dateFormat);
return sdf.format(cal.getTime());
//Getting the Yesterday Date and time...
public String dateTime1(String dateFormat)
cal = Calendar.getInstance();
cal.add(Calendar.DATE, -1);
sdf = new SimpleDateFormat(dateFormat);
return sdf.format(cal.getTime());
public static void main(String[] args) {
StandardReconReport SR = new StandardReconReport();
SR.stanReportGeneration();
For the above code i given the report parameter from the property file.
reportservername=servername
datagenreportpath=rassdk\://C\:
MyEclipseWorkPlace
IDSREPORTGENERATION
REPORTFILES
STANDARD_RECON_REPORT.rpt
The code is working fin, while i try to connect the BO which is avilble in Windows server, but this is not working if the BO is avilble in solaris server.
Any bodies please help
Edited by: velmurugan.spn on Sep 12, 2009 6:38 AMHi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean -
Unable to get the dataSources while creating the persistent stores.
Hi, While I am trying to create a persistent store (JDBC Store) I am unable to see the already created DataSources in the dropdown menu. I also tried creating new DataSource from Persistent Store creating screen but still could not see.
Following steps followed while creating DataSource.
Fill in the values for
Name, E.g.: JD-JDBC-Store.
JNDI Name – jdbc/JobDispatcherDS.
DatabaseType – Oracle
Database Driver - Retain the default selection
Click on ‘Next’
Click on ‘Next’
Fill in values for:
Database Name – SID of the Database
Host Name – The hostname/IP on which the Database is running
Port – DB Port
Database User Name - JOBUSER.
Password – JOBUSER
Click on ‘Next’
Click on ‘Test Configuration’ to ensure the correctness of the values. Got a success message on the screen.
Click on ‘Next’
Select your target server. E.g.: AdminServer
Click on ‘Finish’
Following steps while creating the Persistent Store
Clicked on New button. Select ‘Create New JDBC Store’ Option
Fill in the values.
name – E.g.: JD-JDBC-Store
Target server - admin Server.
data source - not able to get any to select from the DropDown.
Thank You,
Naresh.Dear Rajesh ,
I am assuming your server is on Windows :
For Eg.
My SID is PRD and system number 02 and hostname prdserver then command should be execute like :
E:\usr\sap\PRD\DVEBMGS02\exe>jcmon pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS02_prdserver
Rest all are same :
In JControl Monitor Program - Main Menu :
Select : 20 : Local Administration Menu
And check the status of server0 process it shoud be up and running .
Regards ,
Santosh -
Unable to launch the installer while trying to install OWB 10.2.0.1
Hi All,
I am Unable to launch the Universal installer while trying to install OWB 10.2.0.1.
My System Configurations : Intel Processor
OS : Windows 2003 (64-Bit).
Please share if you have faced any such issues earlier.
Thanks,
Shanthi
Edited by: 880067 on Aug 18, 2011 1:09 AMIt Throws me an error msg as follows
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x7D621157
Function=RtlUnicodeToMultiByteSize+0x4A0
Library=C:\windows\system32\ntdll.dll
Current Java thread:
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.GetAllOracleHomes(Native Method)
at oracle.sysman.oii.oiip.oiipg.OiipgOracleHomes.getOsdOracleHomeInfo(OiipgOracleHomes.java:291)
at oracle.sysman.oii.oiif.oiifp.OiifpContentsTabPanel.add33Comps(OiifpContentsTabPanel.java:1020)
at oracle.sysman.oii.oiif.oiifp.OiifpContentsTabPanel.fillInventoryTree(OiifpContentsTabPanel.java:702)
at oracle.sysman.oii.oiif.oiifp.OiifpContentsTabPanel.refreshTree(OiifpContentsTabPanel.java:1508)
at oracle.sysman.oii.oiif.oiifp.OiifpContentsTabPanel.prepareInvTree(OiifpContentsTabPanel.java:2253)
at oracle.sysman.oii.oiif.oiifd.OiifdInventoryDialog.doModal(OiifdInventoryDialog.java:457)
at oracle.sysman.oii.oiif.oiifw.OiifwWizDialog.onViewPrivate(OiifwWizDialog.java:863)
at oracle.sysman.oii.oiif.oiifw.OiifwWizDialog.access$000(OiifwWizDialog.java:330)
at oracle.sysman.oii.oiif.oiifw.OiifwWizDialog$PrepareInventoryTree.run(OiifwWizDialog.java:1778)
at java.lang.Thread.run(Unknown Source)
Tried applying various JDK versions but still the problem persists.
Edited by: 880067 on Aug 18, 2011 10:55 PM
Maybe you are looking for
-
Because of a past experience with fraudulant charges with Apple, I wish now to pay for my downloads with an iTunes card. I purchased one for $20, logged on to my account, entered the "redeem" code that was on the new card, and then went into the iTu
-
"Checkout" buttons not working
Hello Mac Community - I have noticed with increasing frequency that when shopping on a web site, all in-site navigation buttons work in except for the one I really need to work: the "Checkout" button. Perhaps it's a sign from the universe about my s
-
Do I have to upgrade to view my RAW files from my Nikon d610?
I just recently purchased the D610 and my version of Lightroom (4) will not recognize the RAW files. Is there a way so that I can work straight from Lightroom vs opening everything in Photoshop, then saving my images as TIFF? Or must I upgrade to ver
-
Hello everyone, i just have a minor problem while using ae cs5. While im moving the slide bar over my composition, it doesn't preview my composition "live". I have to stop the slider on a frame and only then the comp is beeing displayed(as one single
-
SharePoiunt List Datasheet view cell alignment in SharePoint Online
Hi Team, Is it possible to align cell data to top-aligned in SharePoint Online list datasheet view? Cheers, Badal