Unable to generate WSDL file in quality server in SOAMANAGER

Hi Experts,
I have developed a webservice in DEV and generated the wsdl file in soamanager and it works fine. Now when i transport it to QAS webservice gets transported ( SE80 i can see it ) and in soamanager when i go to generate the wsdl file for QAS server it is not allowing me to do it. In soamanager when you click on 'Open WSDL document for selected binding' nothing happens. In the same screen it says ''Services: 0 / Endpoints: 0 '' .
In SICF i see the webservice name however below that i dont see any nodes extending but in DEV i see the client name and once again the webservice name in the below nodes. It appears as below in DEV
/default_host/sap/bc/srt/rfc/sap/zfi_customer_balance_sms/555/zfi_customer_balance_sms/
But in QAS it appears as below
/default_host/sap/bc/srt/rfc/sap/zfi_customer_balance_sms
I have also transported the SICF entry to QAS ie right click on the webservice, click on Obj Directory entry and put it in a TP and transport. Even then the nodes dont appear in QAS.
I am doubting wheather some services need to be activated in SICF. I just need to generate the wsdl file in QAS and later in PRD.
Any help on this will be greatly appriciated.
Thanks
Govind

Hi Govind,
To get the web service working in DEV you configured an endpoint for it using SOAMANAGER right?
You need to do the same endpoint configuration again in QAS & PRD once you transport it there. When you transport the web service between the environments the endpoint configuration in SOAMANAGER isn't transported as well. You need to repeat the configuration exercise each time you transport the web service.
If you are transporting lots of web services then there is functionality to do mass configuration of these web services.
Regards, Trevor

Similar Messages

Generated WSDL Issue - Glassfish App Server

Hi,
I am at a loss as to how to modify the generated WSDL and associated schema for a webservice I am deploying to Glassfish V2 Milestone 4 - Build 33. I'm using EJB 3.0 and the entity beans I developed have one to many and many to one references to each other:
An OverrideVersion contains a reference to the OverrideRequest it belongs to. There can be numerous OverrideVersions. I've tested the database code extensively and there is no problem performing saves and retrieves. The following is taken from the OverrideVersion class:
@ManyToOne
@JoinColumn(name="request", referencedColumnName="pricingRef")
private OverrideRequest request;and this is from the OverrideRequest class:
@OneToMany(mappedBy="request", cascade=CascadeType.ALL,
          fetch = FetchType.EAGER)
private Set<OverrideVersion> overrideVersionCollection;The problem is that if I leave the app server to generate the WSDL these references are generated, which I don't want - I only want the Verson to reference :
<xs:complexType name="overrideVersion">
<xs:sequence>
    <xs:element name="request" type="tns:overrideRequest" minOccurs="0"/>
</xs:sequence>
</xs:complexType>and<xs:complexType name="overrideRequest">
<xs:sequence>
    <xs:element name="overrideVersionCollection" type="tns:overrideVersion" nillable="true" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>I need to be able to change the WSDL as I am getting the following error on retrieves:
com.sun.istack.SAXException2: A cycle is detected in the object graph. This will cause infinitely deep XML:I followed the advice in http://forum.java.sun.com/thread.jspa?threadID=725485&messageID=4184020
"For now, the way is to do this manually : stop the app server, edit the as_install_dir/domains/domain1/generated/xml/j2ee-{apps|modules}/{your-app}/{META|WEB}-INF/wsdl/XXXXX.wsdl, and restart the app server"
but no matter what I do the changes I make to the generated WSDL and schema files aren't refelected in the actual WSDL at the ?WSDL address.
So I decided to take the generated WSDL file, modify it (remove the cyclic references), and drop it in my applications META-INF/wsdl directory (along with the previously generated schema) and specify the @WebService wsdlLocation attribute in my stateless session bean:
@WebService(serviceName="PricingService",
          portName="PricingServicePort",
          wsdlLocation="META-INF/wsdl/PricingService.wsdl")But after deployment I try to access the WSDL (at the same address as the previous generated WSDL http://localhost:8080/PricingService/PricingService?wsdl) and get a plain white HTML page with: Invalid wsdl request http://localhost:8080/PricingService/PricingServiceI haven't been able to come up with a solution to this problem either.
This is doing my head in so any help would be greatly appreciated.
Thanks.

Hi Arvind,
First thing u shud do is..for invoking a webservice through XI do not import all the WSDLs ....Import only the WSDL under the porttypes....
Port types defines the interface in XI...Once u import them....Then check the msg type.....As per u info u shud see them as
getAuthorizationIn_doc---request
getAuthorizationOut_doc---Response..
If u want something more plz ask
Regards,
AshwinM
Note:- Reward If helpful

Adogjf Unable to generate jar files under JAVA_TOP error while patching

Hi,
I'm upgrading my version of Java from 1.3.1_19 to 1.5.0_17. I downloaded the jdk-1_5_0_17-linux-i586.bin file and unpackaged it to /u0/<SID>/<SID>db/10.2.0. It unpackaged it to a new directory jdk1.5.0_17 (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17), whereas the old version is in a directory jdk (/u0/<SID>/<SID>db/10.2.0/jdk).
Having done that I had to run an interoperability patch (4372996). Upon running this patch I received an error at the end:
adogjf() Unable to generate jar files under JAVA_TOP
There were no other errors.
I think the problem has to do with where my new java version is located but I'm not sure. I'm thinking that it's still looking under the old JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk) when I want it to look under the new JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17). So, should I move the contents from the new directory (jdk1.5.0_17) to the old directory (jdk) or is there a way to 'point' it to the new JAVA_TOP.
Please let me know if I'm totally off base and there's another solution. We're currently on EBS 11.5.10.2, DB 10.2.0.4 and RHEL 4 Update 5.
Thanks,
Lia.

Here you go. Hope this helps you to help me :-). Thanks.
+
** Generating the product JAR files...
STRT_TASK: [Generate JAR files] [] [Fri Mar 27 2009 09:20:32]
STRT_TASK: [Generate JAR files under JAVA_TOP] [] [Fri Mar 27 2009 09:20:32]
Signing product JAR files in JAVA_TOP -
/u0/mary/marycomn/java
using entity Customer and certificate 1.
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
Successfully created javaVersionFile.
Generating product JAR files in JAVA_TOP -
/u0/mary/marycomn/java with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u0/mary/maryappl/admin/mary/out/genjars.cmd
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u0/mary/maryappl/ad/11.5.0/java/adjri.zip:/u0/mary/marycomn/util/jre/1.1.8/lib/rt.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/i18n.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/tools.jar:/u0/mary/marycomn/java/appsborg.zip:/u0/mary/marycomn/java/apps.zip:/u0/mary/maryora/8.0.6/forms60/java:/u0/mary/marycomn/java"
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
The JDK version is 1.1.8
Validating the files/directories specified for -areas option
Validating the files/directories specified for -outputSpec option
Validating the directory specified for -lstDir option
About to Analyze the input areas : Fri Mar 27 2009 09:20:36
WARNING: Will not load stale resource unit META-INF/services/javax.xml.parsers
WARNING: Will not load stale resource unit META-INF/services/javax.xml.transform
Done Analyzing the input areas : Fri Mar 27 2009 09:20:43
About to Analyze/Generate jar files : Fri Mar 27 2009 09:20:43
About to Analyze fndnetcharts.jar : Fri Mar 27 2009 09:20:43
Up-to-date : fndnetcharts.jar
Done Analyzing fndnetcharts.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndtdg.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndtdg.jar
Done Analyzing fndtdg.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndjgl.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndjgl.jar
Done Analyzing fndjgl.jar : Fri Mar 27 2009 09:20:45
About to Analyze fndjle.jar : Fri Mar 27 2009 09:20:45
Up-to-date : fndjle.jar
Done Analyzing fndjle.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndlrucache.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndlrucache.jar
Done Analyzing fndlrucache.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndgantt.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndgantt.jar
Done Analyzing fndgantt.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndpromise.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndpromise.jar
Done Analyzing fndpromise.jar : Fri Mar 27 2009 09:20:48
About to Analyze fndforms.jar : Fri Mar 27 2009 09:20:48
About to Generate fndforms.jar : Fri Mar 27 2009 09:20:49
Done Generating fndforms.jar : Fri Mar 27 2009 09:20:50
About to Sign fndforms.jar : Fri Mar 27 2009 09:20:50
ERROR: Javakey subcommand exited with status 1
Javakey standard output:
Adding entry: META-INF/MANIFEST.MF
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java Key Generation
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Javakey error output:
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Successfully created javaVersionFile.
Customer not found in database.
java key error:
adjava -ms128m -mx256m sun.security.provider.Main -gs /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.tmp /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.uns
The above Java program failed with error code 1.
Done Analyzing/Generating jar files : Fri Mar 27 2009 09:20:51
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Failed to generate product JAR files in JAVA_TOP -
/u0/mary/marycomn/java.
adogjf() Unable to generate jar files under JAVA_TOP
AutoPatch error:
Failed to generate the product JAR files
You should check the file
/u0/mary/maryappl/admin/mary/log/4372996.log
for errors.
+

Error while Generating WSDL File from SAP WSDLGenerator

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at WebServiceDescription.SelectOperation.ShowUDOsList(String sessionID)
   at WebServiceDescription.SelectOperation..ctor(String sessionID)
   at WebServiceDescription.WsdlServicesGenerator.ShowOptions()
   at WebServiceDescription.Form1.btCreateWsdl_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
    CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
WsdlServicesGenerator
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Services/WsdlServicesGenerator/WsdlServicesGenerator.exe
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Web.Services
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
axh7tjvl
    Assembly Version: 1.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
o_2nbqv_
    Assembly Version: 1.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I am facing problem While Generating WSDL File from WSDL Geerator which is provided by SAP Business One
If any body has resolved this. Please help Me...!
Thanks
Mritunjay

Hi.
We've seen that error too few times.
We downloaded the sourcecode for the wdsl generator and discovered,
that in our case, it was because we had no user defined objects.
Its actually a bug as far as I can see, where the wdsl generator tries
to enumerate a empty recordset, and crashes.
Regards
Jørgen T.

Unable to create a file in Application Server using OPEN DATASET stattement.

I am unable to create a file in Application Server using the following statement.
OPEN DATASET filename FOR OUTPUT
IN TEXT MODE ENCODING DEFAULT
MESSAGE msg.
The message I'm getting is "Permission Denied". I have checked authorisation using SU53 which says "The last authorization check was successful". Please help.

You can use following code to capture the error.
TRY.
      OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
      CATCH CX_ROOT
      INTO EXCEPTION.
      CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
        RECEIVING
        RESULT = V_MSG.
      MESSAGE v_msg
      TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES   Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful.

Mac mini Server 10.6 unable to search for files on the server from desktop.

I'm running Mac mini Server 10.6 with 15 various Apple Mac desktops 10.4 / 10.6. The problem i'm having is that i'm unable to search for files on the server from any of the desktops. I have fixed permissions and rebooted. I can perfomr a search though command - F and spotlight from the server.
Anyone have any ideas?

I have a Mac mini server with Mac osx 10.6.8 installed --- I have a website {UNDER CONSTRUCTION} installed on it with a REGISTERED DOMAIN NAME belizeansworldwide.com -->[DNS service w/GoDaddy] & DSL INTERNET service w/VERIZON --- {My server is the ONLY DEVICE CONNECTED to my VERIZON DSL router/modem}
When I enter my DOMAIN NAME or WAN IP # in my browser(s)--> Chrome OR Safari -- i get my Verizon modem
set-up page-->{this incl the WAN IP# as I expected}----{NORMALLY I WOULD ACCESS MY Actiontec
modem/router via 192.168.1.1} --- While in that webpage there's an option "shared files/folders" & clicking on that option DISPLAYS MY WEBSITE ---> {"PORT FORWARDING DID NOT RESOLVE THAT"}
My next attempt @ a solution was through my Server's SystemPreference>Sharing>Internet Sharing
& this the Original Object of my post ===> "MY SHARING PANEL DOES NOT INCLUDE THE OPTION
FOR 'Internet Sharing' among the others like CD DVD, Remote Login,Remote Management, Bluetooth Sharing, etc.etc ---- Hope this additional info will help to clarify &/or explain my problem
Thanks, & best regards to you & yours

How can i include Services and Bindung in a generated WSDL file?

Hi,
i what to use a generated wsdl file from an erp system, to build a web service client with WSDL2Java (org.apache.axis.wsdl.WSDL2Java).
I noticed, that services an bindings are missing, also a policy is included.
How can i include services and bindings in the wsdl and exclude the policy?
Thanks!

well, I assume you have SOAMANAGER.
choose your service & "Apply Selection" (very useless button btw)
select a binding in the dropdown box or create on if you do not have one yet
Click button "Show WSDL options" (actually they do not really look like buttons in WD; call it yellow blot)
Some extra config area is thrown onto your screen (without any sense for usability or design); Change the radio button for WSDL format from "WS policy" to "Standard"; make sure the first radio button group is on "True" for monolithic
Now click the link (why is this a link and no blot?) called "Display selected bindings WSDL URL"
an extra text field is again thrown onto your screen somwhere between the dropdown and the WSDL option config area containing an URL (get out your glasses if you don't see the sub-10pt-letters)
hope it helps,
anton

Error : generate war file for iplanet server 6.5

I use war file that generate from WSAD V.4 and deploy this war file to iPlanet sun one app server V6.5.
before deploy to iplanet
I must use command to generate war file for iplanet server (convert J2EE Archive to IAS Archive)
but i found problem after use this command
./deploycmd -j2ee2ias -f xxxx.war
com.iplanet.ias.tools.buzz.util.ArchiveHandlerException: invalid EXT descriptor signatureat com.iplanet.ias.tools.buzz.util.ArchiveHandler.<init>(Unknown Source)
at com.iplanet.ias.tools.buzz.common.ArchiveFile.<init>(Unknown Source)
at com.iplanet.ias.tools.buzz.common.WarArchiveFile.<init>(Unknown Sourc
e)
at com.iplanet.ias.tools.buzz.common.WarArchiveFile.<init>(Unknown Sourc
e)
at com.iplanet.ias.tools.buzz.common.iascom.processOption(Unknown Source
at com.iplanet.ias.tools.buzz.common.iascom.main(Unknown Source)
Any body please help?
Thanks alot.

I use war file that generate from WSAD V.4 and deploy this war file to iPlanet sun one app server V6.5.
before deploy to iplanet
I must use command to generate war file for iplanet server (convert J2EE Archive to IAS Archive)
but i found problem after use this command
./deploycmd -j2ee2ias -f xxxx.war
com.iplanet.ias.tools.buzz.util.ArchiveHandlerException: invalid EXT descriptor signatureat com.iplanet.ias.tools.buzz.util.ArchiveHandler.<init>(Unknown Source)
at com.iplanet.ias.tools.buzz.common.ArchiveFile.<init>(Unknown Source)
at com.iplanet.ias.tools.buzz.common.WarArchiveFile.<init>(Unknown Sourc
e)
at com.iplanet.ias.tools.buzz.common.WarArchiveFile.<init>(Unknown Sourc
e)
at com.iplanet.ias.tools.buzz.common.iascom.processOption(Unknown Source
at com.iplanet.ias.tools.buzz.common.iascom.main(Unknown Source)
Any body please help?
Thanks alot.

Could not able to generate WSDL file in ID

Hi all,
I am Trying to generate wsdl file in ID->tools->define ws.
in overview the following error is displayed.
<?xml version="1.0" encoding="ISO-8859-1"?>
<err>
Object External Message KCRS_WSDL | http://ehro.eds.com/FRAMEWORK/Common | publishLeaveStatusSoapOut | http://www.ehro.eds.com/xsd/utility not found in Integration Repository
</err>
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c is given in the step2 ,and required details in step 3 and 4.
in step5 the above error is seen.
Let me knoe where is the problem.
Thanks,
Srini

hi
folow these links
/people/daniel.graversen/blog/2008/04/14/use-proxy-to-inspect-httpsoap-requests
https://weblogs.sdn.sap.com/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_weblog&query=wsdlusingProxy+&adv=false&sortby=cm_rnd_rankvalue
regards
Sandeep
if helpful kindly reward points

(269091446) Q WWSD-10 Is the generated WSDL file by Weblogic use for UDDI registration?

Q <WWSD-10> Is the generated WSDL file by Weblogic use for UDDI registration?
A <WWSD-10> WLS6.1 does not provide UDDI services and it has no automatic way to
register your web service with a service broker or repository. If you were to do
it yourself one of the things you would have to supply would be the WSDL file that
describes your web service.

Q <WWSD-10> Is the generated WSDL file by Weblogic use for UDDI registration?
A <WWSD-10> WLS6.1 does not provide UDDI services and it has no automatic way to
register your web service with a service broker or repository. If you were to do
it yourself one of the things you would have to supply would be the WSDL file that
describes your web service.

Cannot generate WSDL file with wscompile

I get an error while generating the WSDL file using wscompile tool.
my compile line is "wscompile -gen:server CRAWS.xml -keep" and I get a RmiModeler error with an ClassNotFoundException .
I have put my jar file in the bin folder (same folder of wscompile) and I've also copied my service build files in the same folder (under the package subfolders).
Here is the code of the xml configuration:
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<service name="CraWS_Service" targetNamespace="urn:com.servepath.cra/wsdl/CraService"
      typeNamespace="urn:com.servepath.cra/types/CraService"
      packageName="com.servepath.CraWebService">
    <interface name="com.servepath.CraWebService.CraWSIF" servantName="com.servepath.CraWebService.CraWS_Impl"/>
</service>
</configuration>

I'm new to Web Services so I'm just guessing, but perhaps you need to add -classpath lib/foo.jar;lib/bar.jar to specify where your class-files are.

Generate WSDL File from Management Console?

Hi,
I am trying to enable a batch job as a web service. So I registered the batch I want and I copied the whole file from the u201CView WSDLu201D button. Now I am trying to use axis1.1 to generate the code and am getting errors. Is this supposed to generate a fully working WSDL file?
The first error I get is
org.xml.sax.SAXException: Error: URI=file:/c:/axis/BO.wsdl Line=10: Undeclared prefix in name: "xsd:schema".
        at org.apache.axis.utils.XMLUtils$ParserErrorHandler.error(XMLUtils.java:619)
        at org.apache.crimson.parser.Parser2.error(Unknown Source)
        at org.apache.crimson.parser.Parser2.processName(Unknown Source)
        at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
        at org.apache.crimson.parser.Parser2.content(Unknown Source)
        at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
        at org.apache.crimson.parser.Parser2.content(Unknown Source)
        at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
        at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
        at org.apache.crimson.parser.Parser2.parse(Unknown Source)
        at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
        at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
        at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:322)
        at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:367)
        at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:384)
        at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
        at java.lang.Thread.run(Unknown Source)
So I add
xmlns:xsd=http://www.w3.org/2001/XMLSchema
to my WSDL file. Then I get
org.xml.sax.SAXException: Error: URI=file:/c:/axis/BO.wsdl Line=1393: Undeclared prefix
        at org.apache.axis.utils.XMLUtils$ParserErrorHandler.error(XMLUtils.java:619)
        at org.apache.crimson.parser.Parser2.error(Unknown Source)
        at org.apache.crimson.parser.Parser2.processName(Unknown Source)
        at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
        at org.apache.crimson.parser.Parser2.content(Unknown Source)
        at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
        at org.apache.crimson.parser.Parser2.content(Unknown Source)
        at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
        at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
        at org.apache.crimson.parser.Parser2.parse(Unknown Source)
        at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
        at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
        at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:322)
        at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:367)
        at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:384)
        at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
        at java.lang.Thread.run(Unknown Source)
So I add
xmlns:soap=http://schemas.xmlsoap.org/wsdl/soap/
Now I am getting other errors
C:\axis>java -classpath C:\j2sdk1.4.2_18\lib\tools.jar;C:\axis\axis-1_1\lib\axis.jar;C:\axis\axis-1_1\lib\axis-ant.jar;C:\axis\axis-1_1\lib\commons-lo
gging.jar;C:\axis\axis-1_1\lib\commons-discovery.jar;C:\axis\axis-1_1\lib\saaj.jar;C:\axis\axis-1_1\lib\jaxrpc.jar;C:\axis\axis-1_1\lib\wsdl4j.jar;C:\
axis\axis-1_1\lib\log4j-1.2.8.jar org.apache.axis.wsdl.WSDL2Java -a c:\axis\BO.wsdl
WSDLException (at /definitions/message[1]/part): faultCode=INVALID_WSDL: Unable to determine namespace of 'di_Wait_Profiling_Task_Output:PF_Task_Response'.:
        at com.ibm.wsdl.util.xml.DOMUtils.getQName(Unknown Source)
        at com.ibm.wsdl.util.xml.DOMUtils.getQualifiedAttributeValue(Unknown Source)
        at com.ibm.wsdl.xml.WSDLReaderImpl.parsePart(Unknown Source)
        at com.ibm.wsdl.xml.WSDLReaderImpl.parseMessage(Unknown Source)
        at com.ibm.wsdl.xml.WSDLReaderImpl.parseDefinitions(Unknown Source)
        at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
        at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
        at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
        at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:406)
        at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:393)
        at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
        at java.lang.Thread.run(Unknown Source)
So I was curious if this was supposed to be the complete WSDL file?
Thanks in advance

I tried with 11.7.3.7, using the following command and using axis jar files that are bundled with DI
it did generate the java classes successfully
I don't think there is much difference between 11.7.3.5 and 11.7.3.7
java -classpath "C:\j2sdk1.4.2_18\lib\tools.jar;%LINK_DIR%\ext\lib\axis.jar;%LINK_DIR%\ext\lib\commons-logging.jar;%LINK_DIR%\ext\lib\commons-discovery.jar;%LINK_DIR%\ext\lib\saaj.jar;%LINK_DIR%\ext\lib\jaxrpc.jar;%LINK_DIR%\ext\lib\wsdl4j.jar;%LINK_DIR%\ext\lib\log4j-1.2.8.jar" org.apache.axis.wsdl.WSDL2Java -a c:\axis\BO.wsdl
let me know if its works for you, otherwise will check in 11.7.3.5
how are you using these classes ? for calling a Job published as web service, you could write a simple java client application and passing the SOAP request for calling the batch job

JAX-WS generated WSDL on Sun Application Server 9: strange port address

I have deployed web service to Sun System Application Server 9, using JAX-WS 2.0. Server runs on virtual Ubuntu machine in VMware on Windows host. Then I try to connect from Windows to that webservice. When I point browser to
http://192.168.215.156:8090/X/XService?wsdl
I get WSDL with such line:
<soap:address location="http://ubuntu:8090/X/XService"/>
(instead of expected 192.168.215.156 there is host name "ubuntu")
And then calling Web Service throws UnknownHostException: ubuntu.
I thought that port name should be generated based on request URL - but it is not. I tried to change manually generated file (in domain1/generated/.. etc) - but still, even after that change and server restart, I get "ubuntu" host when access wsdl.
How to solve this problem, so that returned port address were "192.168.215.156"?

I'm 100% not sure on this, but from what I can tell, SJSAS processes the WSDL file on the fly before serving it to the browser/client. It appears to modify the soap:addess location with a seemingly random domain name.
This domain name appears to be the result of a reverse lookup on the machine's own ip address. If you have access to your dns server, you can manipulate the value that way. Or just modify the HOSTS file on that machine.
I don't know any way to configure the WSDL emitter directly to use specific domain names.

FB3B2 unable to import WSDL files that contain XSD imports

Much to my dismay, the new WSDL import wizard does not seem
to work on WSDL files that import XSD files. When "Finish" is
pressed, an error dialog states "The WSDL definition could not be
parsed. The wizard cannot complete successfully."
I created a sample WSDL that uses the most basic of XSD
files to demonstrate. Remove the import line from the WSDL and it
will import, with the line it will not.

Hi Jeff,
How are you specifying the WSDL URI?
- If as an absolute path on your machine, make sure there are
no spaces in that path – there is a known issue about path
with spaces and WSDL with imports, and we’re on it. We tried
out your sample WSDL this way and it works.
- If you are specifying it as an HTTP url (accessing it over
the Apache HTTP server, for example), the workaround is a little
more complicated. There are indeed some unresolved issues with the
ActionScript generator. Try putting the wsdl and xsd files inside a
folder in the webroot, and another copy of the xsd in the webroot.
This worked for me - the problem is about locating the imported
document correctly: the introspection correctly uses the sibling
xsd file, while the generator incorrectly looks for that file one
level up. We’ll look into this and fix it.
Please let me know if it starts working or if it still does
not generate the ActionScript client classes. Thank you.
Also, please be aware of another known issue about WSDL with
imports:
http://bugs.adobe.com/jira/browse/FB-7678
(For WSDLs that import other documents, the cached WSDL file should
include the content of the imported documents).
Lacra

Unable to open leopard files on windows server

Hi,
We had a mac which was on Leopard and saved files to the server
The file system we use is a Windows 2008 File Server, this has worked fine with leopard for years
However I understand that Leopard splits the files into resource forks - and that Lion has dropped support for these files.
That particular mac is now on Lion as we upgraded and encountering LOTS of issues
I unable to open or edit lots of the files as i believe chunks of the files are missing.
E.g an .eps file showed as 740KB on leopard - Viewing from a windows PC it was 730kb for the .eps and 10kb for the ._ resource fork.
Now that we are on the LION upgrade, we only see the .eps file and it is only 730kb. Information missing is things such as preview (quark), Font data, type of file, version number
Is there anyways to fix this? we have hundreds! of images, files etc created with leopard and now upgraded to lion they all have become useless!
Rejoining the resource forks and files together so that they are usable on lion
Thanks

You also may want to post this in the Lion forum, someone there may have some insight.

Unable to generate WSDL file in quality server in SOAMANAGER

Similar Messages

Maybe you are looking for