Error : generate war file for iplanet server 6.5

I use war file that generate from WSAD V.4 and deploy this war file to iPlanet sun one app server V6.5.
before deploy to iplanet
I must use command to generate war file for iplanet server (convert J2EE Archive to IAS Archive)
but i found problem after use this command
./deploycmd -j2ee2ias -f xxxx.war
com.iplanet.ias.tools.buzz.util.ArchiveHandlerException: invalid EXT descriptor signatureat com.iplanet.ias.tools.buzz.util.ArchiveHandler.<init>(Unknown Source)
at com.iplanet.ias.tools.buzz.common.ArchiveFile.<init>(Unknown Source)
at com.iplanet.ias.tools.buzz.common.WarArchiveFile.<init>(Unknown Sourc
e)
at com.iplanet.ias.tools.buzz.common.WarArchiveFile.<init>(Unknown Sourc
e)
at com.iplanet.ias.tools.buzz.common.iascom.processOption(Unknown Source
at com.iplanet.ias.tools.buzz.common.iascom.main(Unknown Source)
Any body please help?
Thanks alot.

Similar Messages

Error while running a report JSP in a war file from 9iAS server

Hi,
I've a web application archive file (war) which i m deploying to the web using OEM. The war file consists of many JSPs. Among those JSPs i have one Report JSP, which i m calling from another JSP which is like a parameter form for the report JSP. When i call the report JSP, it gave me the following error,
javax.servlet.jsp.JspException: com.sun.corba.se.internal.iiop.ORB
javax.servlet.jsp.JspException: com.sun.corba.se.internal.iiop.ORB
at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:334)
at FMCardExp.jspService(_FMCardExp.java:58)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
The report tag in the report JSP is as follows,
<rw:report id="report" parameters="server=repsvr&userid=scott/tiger@db">
The report server is up and running and so is the database. This report JSP was generated from the reports builder and the opened in JDeveloper environment,in the war file project. It was then compiled and a war file was created. Surprisingly this report JSP works fine when i run my webapplication from the embedded OC4J instance for JDeveloper, but when i try to run it from the 9iAS server i get the above mentioned error. The deployment of the war file to the server is successful and the other JSPs work fine, only the reports JSP is not working. Do i need to have some settings for running the reports JSP, please advise.
Thanks in advance
Unmesh

Can you please help me in deploying jdeveloper (9.0.3.1)war file to 9iAS release 1, when I try to run, none of the jsp's execute, I get java OutOf Memory error, I also think that there may be some version compatibility between jdev jdk and 9iAS jdk.
Thanks,
Kavitha

Deploying war files on iplanet web server 6.0

Hello All,
I tried to deploy an war file on iplanet web server 6.0 using both command line wdeploy and iplanet webserver browser based admin tool. Both the times it did say successfully deployed. I checked the WEB-INF files and it does contain all class files..But the problem is when I try to post a form to one of the class files the error log says as if it cannot find the class file.(I tried the sample app HelloWorld supplied by vendor)
=========
05/Mar/2002:13:19:14] config (13777): for host xx.xx.xx.xx trying to POST /samples/helloworld/GreeterServlet, handle-processed reports: The request method is not applicable to this requested resource.
=================
any help in this regards is appreciated
Thanks
sudhir

Hello,
I got few steps to deploy the WAR file, if you followed the same steps and got the error then ignore this else try with this steps.
a) Set your environment variable IWS_SERVER_HOME to your server_root directory.
b) Add the server_root/bin/https/httpsadmin/bin directory to your classpath.
c) Configure your virtual server for web applications.
From the Server Manager page, select the VirtualServerClass tab, select a Class, and click the Manage button.
Select a Virtual Server and go to the Java Web Apps Settings page for that virtual server. Make sure that the virtual server has Web Apps State turned On, and web-apps.xml is the name of Web Apps File.
To extract the sample WAR file HelloWorld.war in server_root/plugins/servlets/examples/web-apps/HelloWorld, use the wdeploy command as follows:
wdeploy deploy -u /hello -i server.iplanet.com -v testvs -d
/iws60/https-server.mydomain.com/testvs/web-apps/hello
/iws60/plugins/servlets/examples/web-apps/HelloWorld/HelloWorld.war
The syntax for the command is as follows:
wdeploy deploy -u uri_path -i instance -v vs_id [-d directory] war_file
uri_path Specify the URI prefix (a path to access the web application from the browser).
instance Specify the server instance name. (Note: Do not include "https" in the front.)
vs_id Specify the Virtual Server name as it appears on the Manage Virtual Servers page.
directory Specify a directory to extract WAR files. If this directory doesn't exist already, it will be created for you now.
war_file Specify the name of the WAR file.
If the WAR file is extracted successfully, the message "web application deploy successful" appears at the command line.
For verification, go to the /iws60/https-server.iplanet.com/testvs/web-apps/hello directory. It should have the following contents:
colors
index.jsp
META-INF
WEB-INF/
web.xml
/classes/
HelloWorldServlet.class
HelloWorldServlet.java
SnoopServlet.class
SnoopServlet.java
In the server_instance/config directory, the web-apps.xml file should have the following entry:
<vs>
<web-app uri="/hello"
dir="/iws60/https-server.iplanet.com/testvs/web-apps/hello"/>
</vs>
Restart the server instance from the command line or go to the admin GUI and apply configuration changes to the server instance.
Now when you access the webserver instance in your browser, the Error log of that server instance will record successful initialization of the web application environment(web-apps.xml) for the virtual server(vs name). You can access the web application from a browser as follows:
http://server.Mydomain.com:80/hello/index.jsp
or:
http://server.Mydomain.com/hello/
The syntax is as follows:
http://vs_urlhost[:vs_port]/uri_path/[index_page]
Thanks
Selva

How to deploy a war file on Weblogic Server 7.0??

Hello Everyone
I am trying to deploy a servlet on Weblogic Server 7.0 as a WAR file. Can anyone of u plz tell me the steps required to do that. I am posting this question on EJb forum and not on servlets coz this is not a servlet problem, rather this is something which is related to J2EE, ie how to deploy a war file on J2EE Server.
This is how i have done it, but this is not working---
(1) First i created a directory structure for the web application according to J2EE Specification.
C:\Work\
myServletWAR\
META-INF\
WEB-INF\
classes\
HelloServlet.class
web.xml
i.e within work directory, there is a dic called myServletWAR which is my application directory which contains 2 sub directories viz META-INF which contains the mainifest file being generated by the jar utility. the second directory in the myServletWAR application dir is WEB-INF, which contains one file called web.xml for servlet mapping and one directory classes which contains HelloServlet.class
(2) I used following command for creating war file from myServletWAR director(i.e from my web application's directory).
jar -cvf TestServletWAR.war .
This creates the TestServletWAR.war file in myServletWAR dir.
Here is how my Servlet and web.xml looks like...
Servlet code
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class HelloServlet extends HttpServlet
public void doPost ( HttpServletRequest req, HttpServletResponse res )
throws IOException, ServletException
doGet( req, res );
public void doGet ( HttpServletRequest req, HttpServletResponse res )
throws IOException, ServletException
res.setContentType( "text/html" ); // Can also use "text/plain" or others.
PrintWriter out = res.getWriter();
// Get the requestor's IP address (See JavaDocs to see how to get other info):
String addr = req.getRemoteAddr();
// Create output (the response):
out.println( "<HTML><HEAD><TITLE>HelloServlet in myServletWAR</TITLE></HEAD>" );
out.println( "<BODY><H1 ALIGN=\"CENTER\">" );
out.println( "Hello " + addr + ", from HelloServlet in myServletWAR!" );
out.println( "</H1></BODY></HTML>" );
out.close();
************************Servlet Ends Here **************************
web.xml
---------------------------------------------------------- <!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>myServletWAR, a first Web Application</display-name>
<description>
This is a simple web application containing a single servlet
of the "Hello, World" variety.
</description>
<servlet>
<servlet-name>myHello</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>myHello</servlet-name>
<url-pattern>/myHello</url-pattern>
</servlet-mapping>
</web-app>
****************************web.xml file ends here********************
After deploying the TestServletWAR.war file on the weblogic 7.0, i tried to execute the servlet from the browser by the following URL
http://localhost:7001/myServletWAR/myHello
I am getting the HTTP 404 Error, which is an indication that weblogic was unable to find the resourse, which it was requested for. Can anybody plz tell me what i m doing worng?? do i need to use weblogic related xml file (i.e weblogic.xml) also along with web.xml. If yes, then what all i need to include that. I m not very sure. A sample weblogic.xml file for this HelloWorld example will help me a lot.
Looking forward for your help
Thanx in advance
Nisha

hi i have read ur answer regarding deploing a servlet in weblogic 7.0
i am facing another problem
when i try to access the servlet inside my classes directory it throwa an error stating this :
IT DOES NOT FOUND THE CLASSES ON WHICH MY SERVLET DEPENDS.WHAT DOEES ATHIS MEAN
KINDLY TELL ME
PUNEET JAIN
<May 28, 2003 1:46:25 PM IST> <Error> <HTTP> <101250> <[ServletContext(id=6057728,name=WebApp,context-path=/WebApp)]: Se
rvlet class myclasses.Wservlet for servlet welcome could not be loaded because a class on which it depends was not found
in the classpath D:\bea\user_projects\PuneetDomain\applications\WebApp;D:\bea\user_projects\PuneetDomain\applications\W
ebApp\WEB-INF\classes.
java.lang.NoClassDefFoundError: myclasses/Wservlet (wrong name: Wservlet)>
<May 28, 2003 1:46:26 PM IST> <Error> <HTTP> <101018> <[ServletContext(id=6057728,name=WebApp,context-path=/WebApp)] Ser
vlet failed with ServletException
javax.servlet.ServletException: [ServletContext(id=6057728,name=WebApp,context-path=/WebApp)]: Servlet class myclasses.W
servlet for servlet welcome could not be loaded because a class on which it depends was not found in the classpath D:\be
a\user_projects\PuneetDomain\applications\WebApp;D:\bea\user_projects\PuneetDomain\applications\WebApp\WEB-INF\classes.
java.lang.NoClassDefFoundError: myclasses/Wservlet (wrong name: Wservlet)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:791)
at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:517)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:351)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Error deploying war file to Oracle OC4J

Hi
I am deploying a WAR file compiled under creator 2 update 1 and exported for the 1.3 environment. The WAR is to be deployed on Oracle's OC4J 10.1.2.0.2 server.
Previously, everything worked fine, and I could deploy this war and make all the oracle config changes required to run the creator application. Now, it has stopped working. However, I can deploy another app compiled in the same way to oc4j no worries.
When I deploy this particular WAR file (for this particular project), I get the following error:
500 Internal Server Error
java.lang.IllegalArgumentException: Resource /faces/index.jsp not found at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindPageContext.forward(EvermindPageContext.java:221) at JSCreator_index._jspService(_JSCreator__index.java:47) [SRC:/JSCreator_index.jsp:3] at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
Now, it seems to be that the server can't find the index.jsp page which is redirected to from the jscreator_index.jsp default file. however, the index.jsp file is there in the war file - and seems to be valid. I am not sure if it is something to do with the /faces/ mapping as I can't figure out where this is set or pointing to.
Anyone got any pointers as to where I can look for a config issue with this WAR or with OC4J to see if everything is being set up right. Like I say, if I compile any other WAR and deploy it in exactly the same sequence of steps it works fine - something i tested by running up a quick test app to the server and checking it could be served.
I can still deploy an older version of this war, which tells me it is to do with something that has changed in the last 6 weeks or so of our development, but I am not sure how to go about trouble shooting this war file to see what I can do to fix the issue.
any help would be really appreciated.
ta
ben

on a follow up to this, it seems that the issue was caused by the source safe product - we had got some of the project files checked into source safe, and after checking them out, the war would compile and deploy and run. i am following this up but if anyone has any pointers as to why this might be or what file (the nbproject directory specifically, plus the manifest file) would cause this sort of behavior, I would appreciate it

We were using SP3 for iplanet server. Now we want to use SP4.

We were using SP3 for iplanet server. Now we want to use SP4.
When we deploy the EAR on SP4(thru IASDEPLOY), its giving Null pointer
error but at the end it says deployment complete. Also there are no proper
entries in the registry.
If we deploy the same EAR on SP3, then everything is fine.
In SP4, we are not getting even the EAR folder in APPS.

What is this application all about.
May be your ear file has some external dependancy, Can you send the logs for this.
Since it is not deployed, the ear folder is not being created for you.
Thanks,
Rakesh.

Steps to Deploy WAR File in iPlanet

Hi All,
Please tell me how to deploy a War file in iPlanet 6.0
Is there any document for the same.
Please Advice.

Go to your <iashome>/ias/ias-samples directory. There are lot of technology examples which shall guide.

Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMEL

Hi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL

Can anyone tell me Why?Missing license file for: WebLogic Server 6.1

Thank you for take a look and give me solution!
Missing license file for: WebLogic Server 6.1
Error encountered:
java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!

make sure the folder in which the license file exists, is in the classpath
sree
"Robert" <[email protected]> wrote in message
news:3b57da5e$[email protected]..
>
"Roberto" <[email protected]> wrote:
Thank you for take a look and give me solution!
Missing license file for: WebLogic Server 6.1
Error encountered:
java.sql.SQLException: Fail to load jDriver/Oracle due to license
checking
failed!

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Unable to generate WSDL file in quality server in SOAMANAGER

Hi Experts,
I have developed a webservice in DEV and generated the wsdl file in soamanager and it works fine. Now when i transport it to QAS webservice gets transported ( SE80 i can see it ) and in soamanager when i go to generate the wsdl file for QAS server it is not allowing me to do it. In soamanager when you click on 'Open WSDL document for selected binding' nothing happens. In the same screen it says ''Services: 0 / Endpoints: 0 '' .
In SICF i see the webservice name however below that i dont see any nodes extending but in DEV i see the client name and once again the webservice name in the below nodes. It appears as below in DEV
/default_host/sap/bc/srt/rfc/sap/zfi_customer_balance_sms/555/zfi_customer_balance_sms/
But in QAS it appears as below
/default_host/sap/bc/srt/rfc/sap/zfi_customer_balance_sms
I have also transported the SICF entry to QAS ie right click on the webservice, click on Obj Directory entry and put it in a TP and transport. Even then the nodes dont appear in QAS.
I am doubting wheather some services need to be activated in SICF. I just need to generate the wsdl file in QAS and later in PRD.
Any help on this will be greatly appriciated.
Thanks
Govind

Hi Govind,
To get the web service working in DEV you configured an endpoint for it using SOAMANAGER right?
You need to do the same endpoint configuration again in QAS & PRD once you transport it there. When you transport the web service between the environments the endpoint configuration in SOAMANAGER isn't transported as well. You need to repeat the configuration exercise each time you transport the web service.
If you are transporting lots of web services then there is functionality to do mass configuration of these web services.
Regards, Trevor

Different WAR File for OSB and SOA Load Balancers on Clustered Environment

Hi,
Do we need different proxyapp.war Files for each Load Balancer of SOA and OSB Respectively on a Clustered Environment?
Thanks in Advance.

Hi,
Yes you need to have different .war file placed different server to have multiple load balancers.
Regards,
Kal

How to generate Excle file for a report runningin a Batch job

Hello All,
Can we generate Excle file for a report running in a Batch job.
Kindly send reply to [email protected]
Thanks in Advance.
Cheers,
Sundeep

Dear Sundeep,
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award points *

Generate WAR files from WEB projects

Can I generate war files with my web projects?, i have some portal and proccess
projects, and i need to generate wars. If i can generate ear files it´s great.
Does someone knows to do it?

Build => Build Ear.
You can unzip that to find the war issuppose.
Maybe right clicking on your web project and doing "build ..." might
generate a war in your project directory too.
Thank you for any and all help,
Geoffrey
"Leonardo Contreras" <[email protected]> schreef in bericht
news:3fe89850$[email protected]..
>
Can I generate war files with my web projects?, i have some portal andproccess
projects, and i need to generate wars. If i can generate ear files it´sgreat.
Does someone knows to do it?

Oracle error "No message file for" after Upgrade to 10.2.0.5

After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
(with both Users sidadm and orasid)
Platform AIX 64 bit
The installation und Upgrade with dbua works fine.
DB and SAP runs after the Upgrade.
then I tried
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: Message 904 not found; No message file for produstyle='font-
family:courier' ct=RDBMS,
facility=ORA; arguments: ["XX"]
The Environment is correct,
ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
I cant find any failure in Configuration or Install Logs.
So i tried the following:
Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
10.2.0.4 Oracle Installation to the 10.2.0.5 home.
the result ist that the Messagefile could be read by Oracle an i get
the ORA-00904
Here the same Query:
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: "XX": invalid identifier
So I do the same procedure with an other System.
I detect:
the Patch 9952230 (SAP_102051_201011/9952230) delivers
both Message Files oraus.msg and oraus.msb which caused the problem.
Has anyone the same Problem?
Are there any other Impacts with wrong Message Files .
I raised a OSS Call, but no answer till today.
best regards
Uwe

I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
Download link:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
You can find more details also in:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
The problem with this solution. It is not officially released by SAP.

Error : generate war file for iplanet server 6.5

Similar Messages

Maybe you are looking for