Unable to get the log for Suspended process in BPM

Hi All,
We are integrating SAP BPM with SAP BRFPlus.
We created a rule in a BRFPlus function and converted that function as a RFC.
Now we imported the RFC into BPM process and did the subsequent settings as per the blog
Calling ABAP RFC in CE BPM 7.2
But when we check the process,it shows to be suspended and when we try to resume it it still goes in error.
in the BPM we did not create any activity other than one automated activity hosting the RFC between start and end steps.
Can you please guide me where to check the error log and how to resolve this error with automated activity?
Checked most of the articles and blogs on SDN but did not find any answer.
Please help me.
Thanks in advance

Hi Siddhant,
Thanks a lot for your valuable inputs.
We are getting the following error.
A technical error during invocation: Could not invoke service reference name
Tried with all the possible help from SDN but could not find the solution.
We have created a BRFPLUS function converted it into RFC and imported that RFC into the BPM process and inserted it into an automated activity activity between start and end process.
We got the error while testing the automated activity.
Can you please guide us?This is very important.
Thanks in advance

Similar Messages

Unable to get Audit logs for Data Mining Model Oracle11g

Hi All, I followed all the steps given below 2 links but not getting any audit logs.
http://download.oracle.com/docs/cd/B28359_01/datamine.111/b28130/install_odm.htm#DMADM024
http://download.oracle.com/docs/cd/B28359_01/datamine.111/b28130/schemaobjs.htm#sthref233
Made sure the audit_trail is set to DB.
SQL cmds and its output shown below
SQL> AUDIT GRANT,AUDIT,COMMENT,RENAME,SELECT ON mining model NB_SH_Clas_sample;
Audit succeeded.
SQL> COMMENT ON MINING MODEL NB_SH_Clas_sample IS 'i am here';
COMMENT ON MINING MODEL NB_SH_Clas_sample IS 'i am here'
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 31648
Session ID: 135 Serial number: 114
SQL> quit
Please help me if i have left out any step
Thanks in Advance

Hi.
Please take a look at the other concurrent thread on model object auditing for more detailed information. If you have Oracle support, please file a TAR with Metalink (http://metalink.oracle.com).
Regards, Peter.

Unable to get the print option in network for Services

Hi Experts
I am unable to get the print for services in CN21/CN22 but the print option is in Disable Mode .How should I get it as to Enable Mode to get print .Pl find the attached screenshot for reference
Thanks in Advance
Ambarish

Hi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna

Logs for network processes

hi, i know about bdump and udump, but where do the logs for network processes go? and what exactly are oracles network processes?
thhanks

It should be in $ORACLE_HOME/network/logs
Read this doc
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/architecture.htm#sthref484

Unable to get tha data for Residual Order Plan query-0PS_C04_Q0008

Hi Xperts,
i have activated standard query-0PS_C04_Q0008.
But when i am executing the query i am unable to get the data for "Residual order plan" in the report output..
As i checked the transformation and the queries for this, every thing seems ok.
Could please suggest me the best way to check further or How can i get the data for this field?
Regards,
SAP

Check whether you have data for "Residual order plan" in 0PS_C04.

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

An unexpected error occurred processing your request. Check the logs for details and correct the problem.

Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
Rakesh

Hi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

An Error occured while processing this page. check the log for details

Hi ,
when i open an browser http://localhost:8300/HyperionPlanning/AppWizard.jsp
i get an error stating that :: An error occured while processing this page. check
the log for details
i am not aware where to look the log files.
second issue. on anothor desktop i am able to login but when i create an sample application it moves forward until finish and takes lot of time and gives me an same error as above .
please help me out ASAP iam tired uninstalling and reinstalling the products.
please mail me at [email protected]....
thanks and regards
RED

Hi,
If you are running planning as a service could you stop the service, then run planning server from the start menu.
If you try and log in again it should produce some error messages.
Cheers
John
http://john-goodwin.blogspot.com/

An Error Occurred While Processing This Page. Check The Log For Details. Pl

Hi,
I started getting this error while opening the app
Application was working fine. All of a sudden this error came while opening the application.
" An Error Occurred While Processing This Page. Check The Log For Details. Please Close The Current Tab and Open Application Again."
I cannot see calc manger rules for this means in calc manager I am not able to see this app.
Also, in logs I see
java.lang.RuntimeException: Error loading objects from data source: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
I am not able to get why this is occurring.
Any help?

If it is not important then you can try deleting and recreating the application, if you want to be sure after you delete the application then drop/recreate the Oracle schema.
If you have problems deleting the application and have to remove it manually the following post might be helpful Planning 11.1.1.3 - Manually Delete a Classic Application
Cheers
John
http://john-goodwin.blogspot.com/

What could be the reason for Crawl process to take long time or get in to a hung state.

Hi All,
What could be the reason for Crawl process to take long time or get in to a hung state? Is it something also related to the DB Server resources crunch? Does this lead to Index file corruption?
What should be the process to be followed when index file is corrupted? How do we come to know about that?
Thanks in Advance.

"The crawl time depends on what you are crawling -- the number of items, the size of the items, the location of the items. If you have a lot of content that needs to be crawled, it will take much time".
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f4cad578-f3bc-4822-b660-47ad27ce094a/sharepoint-2007-crawl-taking-long-time-to-complete?forum=sharepointgeneralprevious
"The only clean and recommended way to recover from an index corruption is to completely rebuild the index on all the servers in the farm."
http://blogs.technet.com/b/victorbutuza/archive/2008/11/11/event-id-4138-an-index-corruption-was-detected-in-component-shadowmerge-in-catalog-portal-content.aspx
Whenever search index file got corrupted it will got the details to Event logs
http://technet.microsoft.com/en-us/library/ff468695%28v=office.14%29.aspx
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How to get the assignees for a specific role in process in BPM 11g

Hi, Gurus,
I am using BPM 11g. I am trying to retrieve all the assignees for a a specific role in process. It will be a parameter for a business rule to do further routing rule. But it seems there is no way to get the information. I found that there are Identity Service Functions in Human Task Assignment. But Identity Service Functions are not listed in Business Rule Activity, neither listed in other activities except Human Task Assignment. I cannot get the assignees in my process.
Is there any way to get all the assignees for a role? I also tried to retrieve the assignees out engine with Worklist API, but it cannot get either. Actually we can get all the assignees information in automatic activity in OBPM 10g. Maybe I am still not familiar with 11g. Any advice is appreciated.
FYI:
My scenario:
Suppose we have a role named ApprovalTeam. In this role, there will be several different department manager (BPM User) added in the role through Workspace. At run time, a request (With department info) with go through the approval by ApprovalTeam. A Business Rule Activity with decide which department manager will approve this request. Different department request will be dispatched dedicate managers, not all the managers in the role. I have an external JavaBean to get the department information from LDAP. To do the routing, I also need know all the department managers (BPM User) in the ApprovalTeam role. Then I can compare which department manager is matched with the request and assign the task to him.
Thanks a lot,
James
Edited by: James Piao on May 31, 2010 6:25 PM

or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10

Using patch plans for 12.1.0.2 target oracle home fails with 'PREREQ_MESG: Unable to get the version of OPatch'

We are attempting to use patch plan to apply PSU and one-offs to a new 12.1.0.2 database oracle home. Our EM version is 12.1.0.4.
We are experiencing the same issue described in ''Bug 20271609 : Unable to get the version of OPatch". This bug is closed as 'duplicate bug to filer' but we do not appear to have visibility into what patch/bug fixes the issue.
Description from the above mentioned bug is our same issue. We do not have this issue when we use patch plans against an 11.2.x oracle_home target. It is unique to 12.1.0.2 oracle_home target.
Description from the bug:
The Plan failed in step "Run Prerequisite Checks" with the following errors:
PREREQ_NAME: Minimum Version of OPatch
PREREQ_DESC: Check if the required version of OPatch is present on the target
PREREQ_TYPE: PATCH_TOOL_CHECK
PREREQ_STATUS: FAILED
PREREQ_MESG: Unable to get the version of OPatch at
/u01/app/oracle/product/12.1.0/dbhome_2/Opatch
We have opened an SR to see if we can get more info on what was already identified as a bug. Has anyone else experienced this issue? If so, can you share any patches or workarounds (other than manually applying patches) that you found useful?
Thanks.

You'll probably get the same info from Support, but the workaround is to use the Patch Database (however that doesn't work if there's no DB target associated to that home). If you were trying to do patchign out of place (clone home, patch, then move db's), EM can do this for you. If you're just installing a new DB Home and trying to patch, then i don' think there's another workaround. The base bug is marked fixed though, so a backport for the 12.1.0.6 plugin should be available very soon. I would ask the support analyst to request the backport for your plugin/patch level...

Unable to get the admin object for the CsContainerAdmin service

Hi,
On AIX, we deployed XIR2 SP2 --> XIR2 SP3 --> SP3 Productivity Pack.
The Conection server does show up on the server list in the CMC, but on trying to access this server, it throws an error" Unable to get the admin object for the CsContainerAdmin service"
Tried to manually create another Connection server, same result.
Is this an issue that is addressed by a later FP?
Thanks in advance
Rajesh Jayakumar

Hi Rajesh,
Were you able to resolve this issue? I am facing the same issue with almost every BOE 11.5 SP3 server on Windows.
For example, the Input file server says this -
"Unable to get the admin object for the FileServerAdmin service for server Input.BOCMSMSGT1.fileserver".
Getting the same error on WebI Report Server as well -
There was an error while retrieving data from the server: Unable to get the admin object for the WebiServerAdmin service for server BOPROCENG1.Web_IntelligenceReportServer.webiserver
Thanks,
Sarang
Edited by: Sarang Deshpande on Sep 26, 2008 3:08 PM

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

Unable to get the log for Suspended process in BPM

Similar Messages

Maybe you are looking for