Unable to install apk package

I am developing apps for virtual reality and I install them on my phone through Google Drive. Most of the times that works fine, but sometimes I can not install the package. The apk file gets downloaded, I get the screen with the required authorizations, but the install button does not work. The cancel button works, the popup information about the authorizations work,so it is not a problem that the touchscreen doesn't work. I then have to restart the phone and then installation is possible. Obviously that is not acceptable if I'm testing and have to install a new version every ten minutes. Can someone tell me what's happening?

That sounds like a weird explanation, but I did in fact change the screen brightness recently, setting it to max :-) Although I did this through the regular settings menu, not using a dedicated app. But I'll see if it makes a difference next time it happens. Thanks!

Similar Messages

  • Unable to Install any packages in Fink

    I am unable to install any packages either via Fink commander or via the terminal. I was able to install some just the other day, so I don't know what went wrong.
    I have not been able to get Fink commander to see any package lists, despite following every bit of advice I could find in these forumns and on the net. Also, I updated the repositories rsync as instructed on the net. I can see the list of Fink packages by running "Fink List". However, when I try to install "sudo apt-get install xyz package" I connstantly receive the error "xyz package not found".
    I'm sure this is a case of operator error, only I don't know what that error might be. I would be most grateful for anyone's help in this regard as I really enjoyed the Fink programs like kdegames that I was able to install before I started having this problem.
    My thanks to everyone for any assistance they can provide.
    Message was edited by: PugetSounder

    I appreciate your previous response, instructing me to enter "source /sw/bin/init.sh as a user in order to run Evolution.
    My problem is that this solution only lasts until I logout. When I log back and and try to run evolution via terminal, I receive the error "Command not found". Once I enter your instruction again, all is well-for that session.
    Is there a way I can do this globally and make it "stick"? By making it stick I mean so that I don't have to do it each time I want to run evolution.
    These issues of course don't happen when evolution is run as admin user. Also, it's worth noting that evolution is the only fink program that causes these problems. Other KDE programs like kgeography and kmahjongg don't have such issues.
    I appreciate any feedback you can give with this issue.

  • Install apk package

    Hi i would like install apk package ( gps navigation ) from internal storage, but i need RW permission on sd card.
    What can i do please?
    I cant touch on install button i can only touch on exit button from intall scren.
    Best regards p.m.

    If the install button is greyed out the app is not compatible with the Android version or phone model. For assistance you need to contact the developer of the app to check that you have the correct version.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Unable to install .p5p  package in global zones in Solaris 11

    Hello All,
    I have few zones configured on my Solaris 11 node which are up and running. I have a package in a .p5p archive package which i need to install in my global zone as well as the non-global zones. I dont want to use a network based repository for the installation.
    When i try to install the package it gives me the below error
    "pkg install: The proposed operation on this parent image can not be performed because
    temporary origins were specified and this image has children. Please either
    retry the operation again without specifying any temporary origins, or if
    packages from additional origins are required, please configure those origins
    persistently."
    1. How to install a .p5p package without a network based repository ?
    2. Is it possible to install packages from the global zone to non-global zones without having to log on to each of the zones ?
    TIA,
    Sudhir

    Package can be installed from global zone to local zone. When you issue pkgadd command from global zone it will distribute the package to local zones.Solaris 11 packaging does not use pkgadd(1M), it uses pkg(1M), described in more detail in pkg(5). Unlike in Solaris 10, the global zone and each non-global zone can have a disjoint set of packages. Thus, it is possible to minimize the global zone but have a zone that has most of Solaris installed. To allow this, pkg does not cause packages that are installed in the global zone to be automatically installed in non-global zones. For most use cases, this is a big improvement over the way things worked in Solaris 10.
    Note that pkgadd(1M) is still available in Solaris 11 to allow you to install legacy svr4 packages. Even when using pkgadd on Solaris 11, it does not cross zone boundaries.

  • OEL 5.7 Unable to install 1 package

    hI,
    When I start the OEL 5.7 in Oracle Virtual Tool Box.. I am getting the message dialog box mentioning...
    There is 1 Package updates available
    and when I try to install through the link it gives the error...
    Public Key for Kernel-2.6.18-274.0.0.0.1.el5.rpm is not installed....
    Do anyone know the solution for it...
    Thanks and Regards

    hi
    I tried
    yum install oracle-validated
    everything went smooth except
    [root@oel ~]# yum install oracle-validated
    Loaded plugins: rhnplugin, security
    This system is not registered with ULN.
    ULN support will be disabled.
    Setting up Install Process
    Resolving Dependencies
    --> Running transaction check
    ---> Package oracle-validated.i386 0:1.1.0-14.el5 set to be updated
    --> Processing Dependency: sysstat for package: oracle-validated
    --> Processing Dependency: unixODBC for package: oracle-validated
    --> Processing Dependency: unixODBC-devel for package: oracle-validated
    --> Processing Dependency: compat-db for package: oracle-validated
    --> Processing Dependency: libaio-devel for package: oracle-validated
    --> Processing Dependency: libXp for package: oracle-validated
    --> Running transaction check
    ---> Package compat-db.i386 0:4.2.52-5.1 set to be updated
    ---> Package libXp.i386 0:1.0.0-8.1.el5 set to be updated
    ---> Package libaio-devel.i386 0:0.3.106-5 set to be updated
    ---> Package sysstat.i386 0:7.0.2-11.el5 set to be updated
    ---> Package unixODBC.i386 0:2.2.11-7.1 set to be updated
    ---> Package unixODBC-devel.i386 0:2.2.11-7.1 set to be updated
    --> Finished Dependency Resolution
    Dependencies Resolved
    ================================================================================
    Package Arch Version Repository Size
    ================================================================================
    Installing:
    oracle-validated i386 1.1.0-14.el5 Server 23 k
    Installing for dependencies:
    compat-db i386 4.2.52-5.1 Server 1.7 M
    libXp i386 1.0.0-8.1.el5 Server 22 k
    libaio-devel i386 0.3.106-5 Server 12 k
    sysstat i386 7.0.2-11.el5 Server 182 k
    unixODBC i386 2.2.11-7.1 Server 830 k
    unixODBC-devel i386 2.2.11-7.1 Server 743 k
    Transaction Summary
    ================================================================================
    Install 7 Package(s)
    Upgrade 0 Package(s)
    Total download size: 3.4 M
    Is this ok [y/N]: y
    Downloading Packages:
    Total 27 MB/s | 3.4 MB 00:00
    warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    Public key for unixODBC-devel-2.2.11-7.1.i386.rpm is not installed
    [root@oel ~]#

  • Unable to install hotfix package 2 for AppV 5 SP1 (KB2897087)

    Good afternoon,
    We've downloaded hotfix package 2 for AppV 5 SP1 (KB2897087) but when going to install we receive the message "The Application Virtualization update setup did not finish because the target version of App-V Server is not installed".
    What we have installed on server is the following:
    - Microsoft App-v Server 5.0.285.0
    - Microsoft App-V Server 5.0.1104.0 Service Pack 1
    So we have SP1 installed. Has anyone else had this issue? Is there another patch / update that needs to be applied first?
    Thanks

    Hi,
    I get the following under an appv_server_patch log file:
    [10F0:07DC][2014-01-29T15:31:24]: Burn v3.6.2803.0, Windows v6.1 (Build 7601: Service Pack 1), path: -KB2897087.exe, cmdline: '-burn.unelevated BurnPipe.{3AF7A429-681C-4D96-BF99-F51728DBA9B1} {209380CC-EA1F-441C-8515-041C255D6504} 3928'
    [10F0:07DC][2014-01-29T15:31:24]: Initializing string variable 'IsBundlePatchOnly' to value '1'
    [10F0:07DC][2014-01-29T15:31:24]: Initializing string variable 'TargetBaselineVersion' to value '5.0.1104.0'
    [10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleLog' to value 'C:\Users\~1\AppData\Local\Temp\appv_server_patch_20140129153124.log'
    [10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleOriginalSource' to value 'KB2897087.exe'
    [10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleName' to value 'Hotfix for Microsoft App-V Server 5.0.1218.0 Service Pack 1 (KB2897087)'
    [10F0:07DC][2014-01-29T15:31:24]: Loading managed bootstrapper application.
    [10F0:07DC][2014-01-29T15:31:25]: Creating BA thread to run asynchronously.
    [10F0:09C4][2014-01-29T15:31:25]: Setting numeric variable 'UNSUPPORTEDLOCALE' to value 1
    [10F0:09C4][2014-01-29T15:31:25]: AppvUX: Found an unsupported locale (2057) for this version of the App-V Bundle installer. Defaulting to the English locale.
    [10F0:09C4][2014-01-29T15:31:25]: AppvUX: Passed all blocking checks.
    [10F0:07DC][2014-01-29T15:31:25]: Detect 13 packages
    [10F0:07DC][2014-01-29T15:31:25]: Detected related bundle: {997a2732-f077-4e9b-adac-a2e7e59787ba}, type: Upgrade, scope: PerMachine, version: 5.0.285.0, operation: MajorUpgrade
    [10F0:07DC][2014-01-29T15:31:25]: AppvUX: A previous version of this product is installed; requesting update.
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: CoreX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: CoreX64Patch target: {F3C7A461-93F2-4A64-B94A-4FC296775522}, state: Absent
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: AllLangpackX64, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: AllLangpackX64 target: {9807F918-9115-4C9C-A30C-C63252083281}, state: Absent
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: EnUsLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: EnUsLangpackX64Patch target: {E6FC6D7E-5D76-4053-89BC-373A21998F05}, state: Absent
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: DeDeLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: JaJpLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: ZhCnLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: ZhTwLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: EsEsLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: FrFrLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: ItItLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: KoKrLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: PtBrLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: Detected package: RuRuLangpackX64Patch, state: Absent, cached: None
    [10F0:07DC][2014-01-29T15:31:25]: AppvUX: Detect phase complete; starting plan phase.
    [10F0:07DC][2014-01-29T15:31:25]: AppvUX: The target product for this update bundle was not found.
    [10F0:09C4][2014-01-29T15:31:26]: AppvUX: Exit status : BaselineNotDetected
    [10F0:07DC][2014-01-29T15:31:26]: Detect complete, result: 0x0
    [10F0:07DC][2014-01-29T15:31:26]: Shutting down, exit code: 0xb
    [10F0:07DC][2014-01-29T15:31:26]: Variable: IsBundlePatchOnly = 1
    [10F0:07DC][2014-01-29T15:31:26]: Variable: TargetBaselineVersion = 5.0.1104.0
    [10F0:07DC][2014-01-29T15:31:26]: Variable: UNSUPPORTEDLOCALE = 1
    [10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleAction = 4
    [10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleElevated = 1
    [10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleLog = C:\Users\~1\AppData\Local\Temp\appv_server_patch_20140129153124.log
    [10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleName = Hotfix for Microsoft App-V Server 5.0.1218.0 Service Pack 1 (KB2897087)
    [10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleOriginalSource = KB2897087.exe
    [10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleProviderKey = {bee44f0f-05be-48e4-81dd-d34a83600b95}
    [10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleTag =
    [10F0:07DC][2014-01-29T15:31:26]: Exit code: 0xb, restarting: No
    I can see it says BaselineNotDetected but also says the TargetBaselineVersion = 5.0.1104.0 which is what we already have installed?

  • UNABLE TO INSTALL THE PACKAGED APPLICATIONS (DOCUMENT LIBRARY)

    Created new workspace, and downloaded and tried to install Document Library
    from http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#DOC_LIB .
    Installed application just fine, but when Apex attempted to install the
    supporting objects, it failed. It hangs for a while and then goes to “page cannot be displayed page” When I click on refresh, and I get an error.
    When browse the tables under SQL Workshop, I noticed that none of the objects have been installed for that App.
    When i try to run the application, i get the following error.
    ORA-06550: line 3, column 19: PL/SQL: ORA-00942: table or view does not exist ORA-06550: line 1, column 17: PL/SQL: SQL Statement ignored ORA-06550: line 5, column 26: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 5, column 3: PL/SQL: Statement ignored ORA-06550: line 6, column 26: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 6, column 3: PL/SQL: Statement ignored ORA-06550: line 7, column 26: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 7,
    Error setting workspace attributes.
    Did anyone installed this APP? if so, was it successful?

    Could be possible that Samsung Galaxy Fit Processor doesn't match with the system requirements of AIR. It should be ARMv7
    http://www.adobe.com/products/air/systemreqs/MOBILE SYSTEM REQUIREMENTS
    Android devices
    VGA: Dedicated Cortex A8 (ARMv7) 550MHz App Processor with Neon for A8 only; Hardware Vector FPU
    WVGA: Dedicated Cortex A8 (ARMv7) 800MHz App Processor; Hardware Vector FPU
    Google Android™ 2.2 or later
    -Pahup

  • Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64

    I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
    MSI Log File :-
    Property(S): ProductToBeRegistered = 1
    MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
    MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
    MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
    Please let me how to install 64 bit package on Win7 64 bit.
    Thanks in Advance.

    Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Unable to install itunes 10,5.I receive this message: there is a problem with this window installer package. A program required for nthis install to complete could not run. Contact your support personnel or package vendor.Am using window ultimate 64 bits

    I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits

    There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • [SOLVED] Unable to install packages in lxc container

    tl;dr: lxc-console should be used for logging in, not lxc-attach. Also, I had to do some additional work to get the tty to work in systemd, and I plan to update the wiki soon.
    I created a container using the following command:
    # lxc-create -n test -t archlinux
    Once created and configured, I started the container daemonized, and attached:
    # lxc-start -n test -d
    # lxc-attach --clear-env -n test -- su - root
    However, I am unable to install any software packages because GPG isn't working properly
    [root@test ~]# pacman -Syu openssh
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    multilib is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    Packages (3): ldns-1.6.17-1 libedit-20130601_3.1-1 openssh-6.5p1-2
    Total Installed Size: 6.08 MiB
    :: Proceed with installation? [Y/n]
    (3/3) checking keys in keyring [###########################] 100%
    (3/3) checking package integrity [###########################] 100%
    error: GPGME error: Inappropriate ioctl for device
    error: GPGME error: Inappropriate ioctl for device
    error: GPGME error: Inappropriate ioctl for device
    error: libedit: missing required signature
    :: File /var/cache/pacman/pkg/libedit-20130601_3.1-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
    Do you want to delete it? [Y/n]
    error: ldns: missing required signature
    :: File /var/cache/pacman/pkg/ldns-1.6.17-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
    Do you want to delete it? [Y/n]
    error: openssh: missing required signature
    :: File /var/cache/pacman/pkg/openssh-6.5p1-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
    Do you want to delete it? [Y/n]
    error: failed to commit transaction (invalid or corrupted package (PGP signature))
    Errors occurred, no packages were upgraded.
    error: segmentation fault
    Please submit a full bug report with --debug if appropriate.
    The container config is as follows:
    lxc.utsname=test
    lxc.autodev=1
    lxc.tty=1
    lxc.pts=1024
    lxc.rootfs=/var/lib/lxc/test/rootfs
    lxc.mount=/var/lib/lxc/test/fstab
    lxc.cap.drop=mknod sys_module mac_admin mac_override
    lxc.kmsg=0
    lxc.stopsignal=SIGRTMIN+4
    #networking
    lxc.network.type=veth
    lxc.network.link=br0
    lxc.network.flags=up
    lxc.network.name=eth0
    lxc.network.ipv4=10.10.209.2/24
    lxc.network.ipv4.gateway=10.10.209.1
    lxc.network.mtu=1500
    #cgroups
    lxc.cgroup.devices.deny = a
    lxc.cgroup.devices.allow = c *:* m
    lxc.cgroup.devices.allow = b *:* m
    lxc.cgroup.devices.allow = c 1:3 rwm
    lxc.cgroup.devices.allow = c 1:5 rwm
    lxc.cgroup.devices.allow = c 1:7 rwm
    lxc.cgroup.devices.allow = c 1:8 rwm
    lxc.cgroup.devices.allow = c 1:9 rwm
    lxc.cgroup.devices.allow = c 1:9 rwm
    lxc.cgroup.devices.allow = c 4:1 rwm
    lxc.cgroup.devices.allow = c 5:0 rwm
    lxc.cgroup.devices.allow = c 5:1 rwm
    lxc.cgroup.devices.allow = c 5:2 rwm
    lxc.cgroup.devices.allow = c 136:* rwm
    Has anyone else experienced this? I've searched the web for solutions to the GPG error, and most of them relate to GPG not working in a chroot because the right things don't exist in /dev. However, I was under the impression that lxc.autodev=1 would take care of this, and indeed /dev/pts, etc. all exist in the container.
    Last edited by archtaku (2014-02-07 23:19:12)

    x33a wrote:
    Try
    # pacman-key --refresh-keys
    from within the container. Though, I do notice a segmentation fault, so I am not sure if it'll work.
    I just did this, and the command succeeded:
    gpg: refreshing 75 keys from hkp://pool.sks-keyservers.net
    gpg: requesting key 5263801D from hkp server pool.sks-keyservers.net
    gpg: requesting key FFF979E7 from hkp server pool.sks-keyservers.net
    gpg: requesting key CDFD6BB0 from hkp server pool.sks-keyservers.net
    gpg: requesting key 4C7EA887 from hkp server pool.sks-keyservers.net
    ... snip ...
    gpg: Total number processed: 74
    gpg: unchanged: 74
    However, the installation still failed.
    I was able to get pacman to install openssh by turning off signature verification. I then ssh'ed into the container, turned signature verification back on, and was able to install other packages just fine.
    So the issue seems to be with how lxc-attach connects to the container. A temporary solution would be:
    Add openssh to the list of packages installed when running lxc-create.
    # lxc-create -n test -t archlinux -- -P vim,openssh
    Attach to the container and run systemctl enable sshd.service, and set a root password
    Detach, then ssh into container and go about your business.
    However, I'd rather have the option of not using sshd on the container, and still be able to install packages, so I don't necessarily consider this problem solved yet.
    Can anyone shed some light on what I might be doing wrong when I attach to the container?
    Last edited by archtaku (2014-02-07 16:46:52)

  • Unable to install package. (e800003a).

    I can't run my app after upgrading of iOS to ver.8.1.3 on iPad 2 or iPad Air (I have they only).
    Simulator - OK. But device - "Unable to install package. (e800003a)."
    I'm using Delphi XE6 with iPhoneOS8.1.sdk and path 30013_paserver_hotfix_for_delphi_xe6_and_rad_studio_xe6.
    Xcode 6.1.1 (6A2008a)

    In Deutch (Link to English inside):
    https://www.danielwolf.eu/blog/2015/1458-delphi-mobile-und-ios-8-1-3
    Open Entitlements.TemplateiOS.xml in Delphi (if not exists then try run - it will created),
    Insert <key > application-identifier </key > <string > XXXXXXXXXX.$(ModuleName) </string >
    instead old <%applicationIdentifier%>
    XXXXXXXXXX - Team ID from developer.apple.com/membercenter

  • Unable to install the full package in Yosemite CS6

    While I am installing CS6 Design Standard, asks me to close applications to continue the close and keeps asking me close "SafariNotificati" but is closed and I impdie install Acrobat Package, what should I do? This is the message: Imgur
    My computer is a iMac (Retina 5K, 27) with Yosemite v. 10.10.2
    Thank a lot.
    Carlos

    I fix the problem: Installation Prompt to Close SafariNotificati

  • [SOLVED] Pacman unable to install packages due to invalid or corrup...

    Hullo,
    I know this is a common error judging by the results google lists for that subject. But all sollutions I found don't work for my specific case.
    My battery died on my laptop and when I rebooted and tried to install a package pacman complained the database was locked (can't remember if I was installing something or else while my battery died, happend while I was away).
    So since I've just rebooted I deleted the lock-file by hand. Now when ever I tried to install something it would complain:
    error: xyz: signature from "xyz @ zyx" is unknown trust
    :: File /var/cache/pacman/pkg/packagexyz.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
    Do you want to delete it? [Y/n] y
    error: failed to commit transaction (invalid or corrupted package (PGP signature))
    So I removed /etc/pacman.d/gnupg, cleared the package-cache and ran pacman-key --init:
    gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created
    gpg: no ultimately trusted keys found
    gpg: Generating pacman keyring master key...
    gpg: key B99666F8 marked as ultimately trusted
    gpg: Done
    ==> Updating trust database...
    gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u
    followed by pacman-key --populate archlinux:
    ==> Appending keys from archlinux.gpg...
    gpg: no valid OpenPGP data found.
    ==> Updating trust database...
    gpg: no need for a trustdb check
    and pacman-key --refresh-keys:
    gpg: refreshing 1 key from hkp://pool.sks-keyservers.net
    gpg: requesting key B99666F8 from hkp server pool.sks-keyservers.net
    gpgkeys: key AA3E1E751B31AB9C2E6CDA64F2A911E7B99666F8 can't be retrieved
    gpg: no valid OpenPGP data found.
    gpg: Total number processed: 0
    ==> ERROR: A specified local key could not be updated from a keyserver.
    It looks like it's not doing much. Anyway, trying to install packages or upgrading the system results in me having to import a bunch of keys and then failing with the before mentioned error.
    Anything I can do?
    Thanks
    Last edited by hachel (2014-02-24 11:50:56)

    Rexilion wrote:Reinstall archlinux-keyring maybe? And then perform the commands you listed earlier.
    Worked, thank you!

Maybe you are looking for