Unable to install .p5p package in global zones in Solaris 11

Hello All,
I have few zones configured on my Solaris 11 node which are up and running. I have a package in a .p5p archive package which i need to install in my global zone as well as the non-global zones. I dont want to use a network based repository for the installation.
When i try to install the package it gives me the below error
"pkg install: The proposed operation on this parent image can not be performed because
temporary origins were specified and this image has children. Please either
retry the operation again without specifying any temporary origins, or if
packages from additional origins are required, please configure those origins
persistently."
1. How to install a .p5p package without a network based repository ?
2. Is it possible to install packages from the global zone to non-global zones without having to log on to each of the zones ?
TIA,
Sudhir

Package can be installed from global zone to local zone. When you issue pkgadd command from global zone it will distribute the package to local zones.Solaris 11 packaging does not use pkgadd(1M), it uses pkg(1M), described in more detail in pkg(5). Unlike in Solaris 10, the global zone and each non-global zone can have a disjoint set of packages. Thus, it is possible to minimize the global zone but have a zone that has most of Solaris installed. To allow this, pkg does not cause packages that are installed in the global zone to be automatically installed in non-global zones. For most use cases, this is a big improvement over the way things worked in Solaris 10.
Note that pkgadd(1M) is still available in Solaris 11 to allow you to install legacy svr4 packages. Even when using pkgadd on Solaris 11, it does not cross zone boundaries.

Similar Messages

Unable to install app servers due to zones in solaris 10

Hi,
I have solaris 10 with zones installed. I am trying to install App server in global zone. But it automatically detects zones also and gets trying to install in it also. When it is not able to it throws error in installation. Pls help how to install only in global zone.

Would u please be more specific on the error/behaviour of the installation program in such scenarios?
Also please post this in Java ES installation/upgrade forum
http://forum.java.sun.com/forum.jspa?forumID=873
thanks

Sharing mounts on non global zone in Solaris 10

Dear All,
We have SAP Development server installed on a non global zone in Solaris 10 based machine. We want to share /usr/sap/trans [in DEV's non global zone] on another machine's non global zone which will host Quality server. I'm sure it can be done, however since I am not OS admin unable to find out how inspite of reading some posts on internet.
Can anyone please help me out here.
regards, Sean.

We did it.
regards, Sean.

Installing Pakcage in Non Global Zone

Hi,
I have SUNWbtool package that is installed in Global Zone but not installed in one my (Non-global) Zones called test
Below are parameters of package on Global Zone.
SUNW_PKG_ALLZONES='true'
SUNW_PKG_HOLLOW='false'
But somehow I can't see this package in one of my test Zone. How to get this package reflected into my test Zone as it is already installed in Global Zone?
This package is required to install Oracle10G grid on on my Test Zone.

it's possible that it's not happening due to questions being asked in the install process. Which version of Sol 10 are you using? ( cat /etc/release)

Unable to Install any packages in Fink

I am unable to install any packages either via Fink commander or via the terminal. I was able to install some just the other day, so I don't know what went wrong.
I have not been able to get Fink commander to see any package lists, despite following every bit of advice I could find in these forumns and on the net. Also, I updated the repositories rsync as instructed on the net. I can see the list of Fink packages by running "Fink List". However, when I try to install "sudo apt-get install xyz package" I connstantly receive the error "xyz package not found".
I'm sure this is a case of operator error, only I don't know what that error might be. I would be most grateful for anyone's help in this regard as I really enjoyed the Fink programs like kdegames that I was able to install before I started having this problem.
My thanks to everyone for any assistance they can provide.
Message was edited by: PugetSounder

I appreciate your previous response, instructing me to enter "source /sw/bin/init.sh as a user in order to run Evolution.
My problem is that this solution only lasts until I logout. When I log back and and try to run evolution via terminal, I receive the error "Command not found". Once I enter your instruction again, all is well-for that session.
Is there a way I can do this globally and make it "stick"? By making it stick I mean so that I don't have to do it each time I want to run evolution.
These issues of course don't happen when evolution is run as admin user. Also, it's worth noting that evolution is the only fink program that causes these problems. Other KDE programs like kgeography and kmahjongg don't have such issues.
I appreciate any feedback you can give with this issue.

Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone fail

Problem:
Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone failed
But I didn't have any issue with the same pkg in Solaris 9
Steps taken:
# groupadd netcon
# useradd -d /export/home/netcon -g netcon -m netcon
# vi /etc/shadow
change LK to NP
# ./UninstallNetConnect.003.002.001.sh
# ./InstallNetConnect.003.002.001.sh
Enter the user account to use: netcon
Enter group: netcon
Installing Sun(SM) Net Connect Proxy Core as <SUNWsrspx>
## Installing part 1 of 1.
/etc/opt/SUNWsrspx/CustomerCert.pem
/etc/opt/SUNWsrspx/SRSCACert.pem
/etc/opt/SUNWsrspx/binaries
/etc/opt/SUNWsrspx/srsproxyconfig.cfg
/opt/SUNWsrspx/bin/srsexec
/opt/SUNWsrspx/bin/srsinstall
/opt/SUNWsrspx/bin/srsinstallmode
/opt/SUNWsrspx/bin/srsproxy
/opt/SUNWsrspx/bin/srspxrun
/opt/SUNWsrspx/bin/srspxstat
/opt/SUNWsrspx/bin/srspxtrace
/opt/SUNWsrspx/bin/srsuser
/opt/SUNWsrspx/bin/srsxfer
/opt/SUNWsrspx/lib/srsimapi.jar
/usr/lib/libsrsimapi.so.1
[ verifying class <none> ]
## Executing postinstall script.
copying initial install customer cert into place
copying initial install srs cert into place
copying initial install proxy config file into place
removing any existing uninstallscript before copying the correct one
copying uninstall script into place
/var/sadm/pkg/SUNWsrspx/install/postinstall: /opt/SUNWsrspx/bin/srspxrun: cannot execute
proxy queue initialization failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <SUNWsrspx> failed.
ERROR: pkgadd failed for: SUNWsrspx
Please correct this situation and rerun the installation.
Exiting installation.
# cat /var/adm/messages
Oct 7 00:00:01 planet root: [ID 702911 daemon.error] ERROR: proxy queue initialization failed
Any clue, or it will only possible in Global zone that didn't have any local zone
thanks in advance

Problem:
Install NetConnect in Global Zone of Solaris 10 x86
with 5 local zone failed
But I didn't have any issue with the same pkg in
Solaris 9
Steps taken:
# groupadd netcon
# useradd -d /export/home/netcon -g netcon -m netcon
# vi /etc/shadow
change LK to NP
# ./UninstallNetConnect.003.002.001.sh
# ./InstallNetConnect.003.002.001.sh
Enter the user account to use: netcon
Enter group: netcon
Installing Sun(SM) Net Connect Proxy Core as
<SUNWsrspx>
## Installing part 1 of 1.
/etc/opt/SUNWsrspx/CustomerCert.pem
/etc/opt/SUNWsrspx/SRSCACert.pem
/etc/opt/SUNWsrspx/binaries
/etc/opt/SUNWsrspx/srsproxyconfig.cfg
/opt/SUNWsrspx/bin/srsexec
/opt/SUNWsrspx/bin/srsinstall
/opt/SUNWsrspx/bin/srsinstallmode
/opt/SUNWsrspx/bin/srsproxy
/opt/SUNWsrspx/bin/srspxrun
/opt/SUNWsrspx/bin/srspxstat
/opt/SUNWsrspx/bin/srspxtrace
/opt/SUNWsrspx/bin/srsuser
/opt/SUNWsrspx/bin/srsxfer
/opt/SUNWsrspx/lib/srsimapi.jar
/usr/lib/libsrsimapi.so.1
[ verifying class <none> ]
## Executing postinstall script.
copying initial install customer cert into place
copying initial install srs cert into place
copying initial install proxy config file into place
removing any existing uninstallscript before copying
the correct one
copying uninstall script into place
/var/sadm/pkg/SUNWsrspx/install/postinstall:
/opt/SUNWsrspx/bin/srspxrun: cannot execute
proxy queue initialization failed
pkgadd: ERROR: postinstall script did not complete
successfully
Installation of <SUNWsrspx> failed.
ERROR: pkgadd failed for: SUNWsrspx
Please correct this situation and rerun the
installation.
Exiting installation.
# cat /var/adm/messages
Oct 7 00:00:01 planet root: [ID 702911 daemon.error]
ERROR: proxy queue initialization failed
Any clue, or it will only possible in Global zone
that didn't have any local zone
thanks in advance
[I believe that it does not work in x86, watches with pkginfo - l SUNWsrspx, in the platform.
Willy Suarez
Sopport UNIX
Colombia/code]

Always install applications into non-global zones?

I am planning on taking full advantage of Containers and Zones as I migrate servers and applications to Solaris 10. During this migration process, I believe that I will have a need to initially just run just one application on a server. I fear that if I do this in the global zone I will lose flexibility down the road for future projects and workloads. So, should I consider always installing applications in a non-global zone and never install applications in the global zone? This would keep the global zone as the controller of the non-global zones and ensure that I can always add more non-global zones later without having to worry about what is running in the global zone.
Are there any thoughts or comments on this topic?

Yes we've found it's best to run the applications in non-global zones. Here are a few benefits, basically we only put an application in the global zone if it requires it (like Oracle RAC). Note non-RAC instances of Oracle will run in a non-global zone just fine.
Reasons to put applications in non-global zones
o Increased security (self contained environment)
o Increased flexibility for provisioning resources (CPU, memory, etc) when/if we decide to run multiple applications on the same hardware
o Increased flexibility in starting up temporary environments to debug issues in parallel to the primary environment (i.e. in another non-global zone on the same server)
o Works well with Sun Cluster (i.e. we cluster the non-global zones so that they can run across several hosts)
o Improved trouble shooting and performance diagnosis as the applications are isolated to a non-global zone
o Simplified environment for the application admins as the environment can be fine tuned for their needs (i.e. only let them see what they need)
o Disaster recovery is much faster for a non-global zone

Failing to install pkg on non-global zone

(root)@syslog1:~# pkgadd -d . SUNWant
Processing package instance <SUNWant> from </home/iqbala>
Jakarta ANT(sparc) 11.10.0,REV=2005.01.08.05.16
WARNING: Stale lock installed for pkgrm, pkg SUNWaspell quit in remove-initial state.
Removing lock.
Using </> as the package base directory.
## Processing package information.
ERROR: Cannot allocate memory for package object array.
pkgadd: ERROR: memory allocation failure
pkgadd: ERROR: unable to process pkgmap
Installation of <SUNWant> failed (internal error).
No changes were made to the system.
(root)@syslog1:~#
(root)@syslog1:~# zonename
syslog
This non-global zone is capped to 1G phy memory out of 2G total of the T1000
(root)@syslog-global:~# uname -a
SunOS syslog-global 5.10 Generic_137137-09 sun4v sparc SUNW,Sun-Fire-T1000
(root)@syslog-global:~# zoneadm list
global
syslog
(root)@syslog-global:~# zonename
global
(root)@syslog-global:~# zonecfg -z syslog info
zonename: syslog
zonepath: /syslog
brand: native
autoboot: true
bootargs: -m verbose
pool:
limitpriv: default,sys_time
scheduling-class: FSS
ip-type: shared
inherit-pkg-dir:
     dir: /lib
inherit-pkg-dir:
     dir: /platform
inherit-pkg-dir:
     dir: /sbin
inherit-pkg-dir:
     dir: /usr
fs:
     dir: /var/logs
     special: /var/logs
     raw not specified
     type: lofs
     options: []
fs:
     dir: /usr/local
     special: /syslog-local/usr/local
     raw not specified
     type: lofs
     options: []
net:
     address: 192.168.0.114
     physical: aggr1
     defrouter: 192.168.0.1
dedicated-cpu:
     ncpus: 1-8
     importance: 10
capped-memory:
     physical: 1G
     [swap: 512M]
attr:
     name: comment
     type: string
     value: "syslog server"
rctl:
     name: zone.max-swap
     value: (priv=privileged,limit=536870912,action=deny)
(root)@syslog-global:~# prstat -Z
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
13118 root 7184K 5952K sleep 1 0 52:00:54 0.5% nco_p_syslog/10
11730 root 162M 123M sleep 59 0 38:51:35 0.1% splunkd/22
7324 root 12M 8280K sleep 59 0 0:58:06 0.0% syslogd/25
266 root 97M 24M sleep 49 0 31:45:02 0.0% poold/8
209 daemon 8104K 3080K sleep 59 0 24:39:56 0.0% rcapd/1
29553 root 2496K 2024K cpu4 59 5 0:00:00 0.0% splunk-optimize/1
21578 root 38M 36M sleep 59 0 0:01:10 0.0% puppetd/2
29554 root 6088K 3712K cpu0 49 0 0:00:00 0.0% prstat/1
24244 root 5760K 3104K sleep 49 0 0:00:00 0.0% bash/1
1024 noaccess 171M 96M sleep 59 0 8:41:32 0.0% java/18
27771 noaccess 189M 100M sleep 1 0 4:44:36 0.0% java/18
274 daemon 3192K 496K sleep 59 0 0:00:00 0.0% statd/1
279 daemon 2816K 576K sleep 60 -20 0:00:00 0.0% nfs4cbd/2
326 root 2304K 40K sleep 59 0 0:00:00 0.0% cimomboot/1
151 root 2576K 344K sleep 59 0 0:00:00 0.0% drd/2
ZONEID NPROC SWAP RSS MEMORY TIME CPU ZONE
3 47 465M 513M 25% 99:54:00 0.7% syslog
0 42 391M 466M 23% 71:04:39 0.1% global
Total: 89 processes, 386 lwps, load averages: 0.21, 0.26, 0.26
Am I hitting a bug?

If your pkg wants to be installed in /usr or another inherit-pkg-dir, it can't because they are share as read-only.
Verify wherer the pkg copies its files.

Can't install 121118-12 on global zone

Hi, after our first round of patching, we're starting again. So, I've had to upgrade my external LPS to latest patches to get it to work at all. It is now on 119788-09 and 121118-12. The patchsvr has been reconfigured to point to getupdates1.sun.com without the trailing "solaris/".
So, I then tried to get my internal LPS working...proxy isn't running. smpatch pointed to the external (DMZ) LPS without a trailing "solaris/". Has patch revisions 119788-07 and 121118-08. Note, when I use the trailing "solaris/" then I get the "no patches" message. Without that, I now get a list of 40 patches (tho' I'm expecting about 190-odd as my external LPS is at the same patch levels otherwise and smpatch which points direct to Sun comes back with 196 patches).
Just to confirm, my current.zip (/var/sadm/spool/cache/Database/http....***...current.zip) gives me a patchlist.delimited file that is 9419 lines long. That seems about right.
So I thought - gosh! I really hope that this isn't going to be a 2-step patch process (currently running kernel rev 118833-24 and have seen a few warnings about going up to the mid-30s) so maybe I have to install the latest UC client patch for this to see that it needs more patches.
But trying to run "smpatch add -i 121118-12" barfs and finishes with the following message;
Patch 121118-12 failed to install due to a failure produced by pkgadd.
WARNING: patchadd returned <5> for global zone
pkgadd: ERROR: The package <SUNWppror> is currently installed on the system in the
global zone. To install the new instance of this package in the global
zone only, you must specify the -G option. To install the new instance
of this package in all zones you must first remove the existing instance
of this package from the global zone first (via pkgrm) and then install
the new instance of this package in all zones.
pkgadd: ERROR: package <SUNWppror> cannot be installed on this system/zoneSo, dutifully, I go to run (after unzip'ing my jar file); "patchadd -G 121118-12". The first time it says much like below, but to check the log file which says the bit above. Any subsequent attempts give up on telling you to look at the logfile because you should've already and just tell you this;
# patchadd -G 121118-12
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Global patches.
0 Patch 121118-12 is for global zone only - cannot be installed on non-global zone.
No patches to install.Funnily enough, I am running on my global zone, but patchadd and smpatch just can't seem to tell. Has there been a major update to patchadd that I've missed or is there some other reason that I can't install this patch? Do I really need to remove it all before patching again? If so, how is that affected by 119788 which also patches SUNWppror?
Thanks for any help,
Sally.

Yes, there are relevant packages in that file;
server # grep SUNW gz*
# Last modified by <pkgadd> to <add> package <SUNWpkgcmdsu>
SUNWapch2d
SUNWapch2r
SUNWapch2u
SUNWexplo
SUNWexplu
SUNWexted
SUNWnbcpp
SUNWnbide
SUNWpkgcmdsu
SUNWppror
SUNWpprou
SUNWpsvrr
SUNWpsvru
SUNWsneep
server # Does this file get updated whenever patchadd/pkgadd -G is used? If so, I would've only installed the update connection proxy server patches on the global zone alone as it is not supported within local zones and I would've seen no reason to install it on a local zone (waste of time).
Also, when I was testing applying patches on zones, I would've run "patchadd -G" for some patches to see what the difference is, but I wouldn't have suspected that this would change the action of the patch forever more.
Or have these packages gotten in there another way.
Within one of my local zones, there are no SUNW packages in the /var/sadm/install/gz-only-packages file and yet the zone cannot remove the patch;
myzone # patchrm 121118-12
Validating patches...
Loading patches installed on the system...
Done!
Checking patches that you specified for removal.
Done!
Global patches.
0 Patch 121118-12 is for global zone only - cannot be removed on non-global zone.
No patches to remove.
myzone #but I guess that is because it is checking on the global zone at that stage. On that point, does a local zone know the name of the server its global zone is on? Can this be determined without being on the global zone?
Thanks,
Sally.

Unable to install apk package

I am developing apps for virtual reality and I install them on my phone through Google Drive. Most of the times that works fine, but sometimes I can not install the package. The apk file gets downloaded, I get the screen with the required authorizations, but the install button does not work. The cancel button works, the popup information about the authorizations work,so it is not a problem that the touchscreen doesn't work. I then have to restart the phone and then installation is possible. Obviously that is not acceptable if I'm testing and have to install a new version every ten minutes. Can someone tell me what's happening?

That sounds like a weird explanation, but I did in fact change the screen brightness recently, setting it to max :-) Although I did this through the regular settings menu, not using a dedicated app. But I'll see if it makes a difference next time it happens. Thanks!

OEL 5.7 Unable to install 1 package

hI,
When I start the OEL 5.7 in Oracle Virtual Tool Box.. I am getting the message dialog box mentioning...
There is 1 Package updates available
and when I try to install through the link it gives the error...
Public Key for Kernel-2.6.18-274.0.0.0.1.el5.rpm is not installed....
Do anyone know the solution for it...
Thanks and Regards

hi
I tried
yum install oracle-validated
everything went smooth except
[root@oel ~]# yum install oracle-validated
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package oracle-validated.i386 0:1.1.0-14.el5 set to be updated
--> Processing Dependency: sysstat for package: oracle-validated
--> Processing Dependency: unixODBC for package: oracle-validated
--> Processing Dependency: unixODBC-devel for package: oracle-validated
--> Processing Dependency: compat-db for package: oracle-validated
--> Processing Dependency: libaio-devel for package: oracle-validated
--> Processing Dependency: libXp for package: oracle-validated
--> Running transaction check
---> Package compat-db.i386 0:4.2.52-5.1 set to be updated
---> Package libXp.i386 0:1.0.0-8.1.el5 set to be updated
---> Package libaio-devel.i386 0:0.3.106-5 set to be updated
---> Package sysstat.i386 0:7.0.2-11.el5 set to be updated
---> Package unixODBC.i386 0:2.2.11-7.1 set to be updated
---> Package unixODBC-devel.i386 0:2.2.11-7.1 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
oracle-validated i386 1.1.0-14.el5 Server 23 k
Installing for dependencies:
compat-db i386 4.2.52-5.1 Server 1.7 M
libXp i386 1.0.0-8.1.el5 Server 22 k
libaio-devel i386 0.3.106-5 Server 12 k
sysstat i386 7.0.2-11.el5 Server 182 k
unixODBC i386 2.2.11-7.1 Server 830 k
unixODBC-devel i386 2.2.11-7.1 Server 743 k
Transaction Summary
================================================================================
Install 7 Package(s)
Upgrade 0 Package(s)
Total download size: 3.4 M
Is this ok [y/N]: y
Downloading Packages:
Total 27 MB/s | 3.4 MB 00:00
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 1e5e0159
Public key for unixODBC-devel-2.2.11-7.1.i386.rpm is not installed
[root@oel ~]#

How to unlock Root Account in non-global zone on Solaris 10 Branded Zone

Hello All,
I have a phsical x86 server running Solaris 11. On top of that, I have 3 Solaris 10 branded zones configured. Due to security policy the root account has been locked by 5 failed login attempts.
Is there a way by which I can unlock root account in non-global zone.
I have the root access of global zone.
Pls help as these are production servers.
Regards

Hey,
It worked. Actually i forgot to save the file.
I changed the /<zonepath>/root/etc/shadow
Removed *LK* & then from global zone did zlogin -l root zonename
Thanks lot.

StarOffice8 Solaris 10 sparc: how to install only in the global zone?

hello all,
i have installed SO8 on T2000 Solaris 10 according this doc:
[http://notallmicrosoft.blogspot.com/2005/10/installing-staroffice-8-on-solaris-nfs.html|http://notallmicrosoft.blogspot.com/2005/10/installing-staroffice-8-on-solaris-nfs.html]
everyhing works fine except that now, i have to setup zones on my nfs server, and because the staroffice installer isn't aware of zones, and doesn't permit to do:
pkgadd -G ...
all the zones created are very big due to staroffice (800Mb instead of 100Mb!)
so i tried the following method:
- launch the installer so-8-ga-bin-solsparc-en-US_fr.sh without DISPLAY for example
- go into /var/tmp/unpack_staroffice/packages
- install all the packages manually:
pkgadd -G -d . SUNWstaroffice-* (this method is already used by OpenOffice!)
This method works well if i use soffice on the nfs server.
But on nfs client, that mount /opt/staroffice8, i got this error:
mimosa-henry% soffice
The application cannot be started.
The component manager is not available.How can i deal with it? Is it possible to modify some scripts to add "-G" option to pkgadd without breaking the installation? What is the component manager? What package is concerned?
Thanks in advance for help,

ok, the solution is here:
http://blogs.sun.com/thaniwa/entry/en_diskless_solaris_x86_p5
and particularly here:
http://docs.sun.com/app/docs/doc/817-7496/6mmqgehgl?a=view

Unable to install hotfix package 2 for AppV 5 SP1 (KB2897087)

Good afternoon,
We've downloaded hotfix package 2 for AppV 5 SP1 (KB2897087) but when going to install we receive the message "The Application Virtualization update setup did not finish because the target version of App-V Server is not installed".
What we have installed on server is the following:
- Microsoft App-v Server 5.0.285.0
- Microsoft App-V Server 5.0.1104.0 Service Pack 1
So we have SP1 installed. Has anyone else had this issue? Is there another patch / update that needs to be applied first?
Thanks

Hi,
I get the following under an appv_server_patch log file:
[10F0:07DC][2014-01-29T15:31:24]: Burn v3.6.2803.0, Windows v6.1 (Build 7601: Service Pack 1), path: -KB2897087.exe, cmdline: '-burn.unelevated BurnPipe.{3AF7A429-681C-4D96-BF99-F51728DBA9B1} {209380CC-EA1F-441C-8515-041C255D6504} 3928'
[10F0:07DC][2014-01-29T15:31:24]: Initializing string variable 'IsBundlePatchOnly' to value '1'
[10F0:07DC][2014-01-29T15:31:24]: Initializing string variable 'TargetBaselineVersion' to value '5.0.1104.0'
[10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleLog' to value 'C:\Users\~1\AppData\Local\Temp\appv_server_patch_20140129153124.log'
[10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleOriginalSource' to value 'KB2897087.exe'
[10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleName' to value 'Hotfix for Microsoft App-V Server 5.0.1218.0 Service Pack 1 (KB2897087)'
[10F0:07DC][2014-01-29T15:31:24]: Loading managed bootstrapper application.
[10F0:07DC][2014-01-29T15:31:25]: Creating BA thread to run asynchronously.
[10F0:09C4][2014-01-29T15:31:25]: Setting numeric variable 'UNSUPPORTEDLOCALE' to value 1
[10F0:09C4][2014-01-29T15:31:25]: AppvUX: Found an unsupported locale (2057) for this version of the App-V Bundle installer. Defaulting to the English locale.
[10F0:09C4][2014-01-29T15:31:25]: AppvUX: Passed all blocking checks.
[10F0:07DC][2014-01-29T15:31:25]: Detect 13 packages
[10F0:07DC][2014-01-29T15:31:25]: Detected related bundle: {997a2732-f077-4e9b-adac-a2e7e59787ba}, type: Upgrade, scope: PerMachine, version: 5.0.285.0, operation: MajorUpgrade
[10F0:07DC][2014-01-29T15:31:25]: AppvUX: A previous version of this product is installed; requesting update.
[10F0:07DC][2014-01-29T15:31:25]: Detected package: CoreX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: CoreX64Patch target: {F3C7A461-93F2-4A64-B94A-4FC296775522}, state: Absent
[10F0:07DC][2014-01-29T15:31:25]: Detected package: AllLangpackX64, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: AllLangpackX64 target: {9807F918-9115-4C9C-A30C-C63252083281}, state: Absent
[10F0:07DC][2014-01-29T15:31:25]: Detected package: EnUsLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: EnUsLangpackX64Patch target: {E6FC6D7E-5D76-4053-89BC-373A21998F05}, state: Absent
[10F0:07DC][2014-01-29T15:31:25]: Detected package: DeDeLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: JaJpLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: ZhCnLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: ZhTwLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: EsEsLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: FrFrLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: ItItLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: KoKrLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: PtBrLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: RuRuLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: AppvUX: Detect phase complete; starting plan phase.
[10F0:07DC][2014-01-29T15:31:25]: AppvUX: The target product for this update bundle was not found.
[10F0:09C4][2014-01-29T15:31:26]: AppvUX: Exit status : BaselineNotDetected
[10F0:07DC][2014-01-29T15:31:26]: Detect complete, result: 0x0
[10F0:07DC][2014-01-29T15:31:26]: Shutting down, exit code: 0xb
[10F0:07DC][2014-01-29T15:31:26]: Variable: IsBundlePatchOnly = 1
[10F0:07DC][2014-01-29T15:31:26]: Variable: TargetBaselineVersion = 5.0.1104.0
[10F0:07DC][2014-01-29T15:31:26]: Variable: UNSUPPORTEDLOCALE = 1
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleAction = 4
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleElevated = 1
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleLog = C:\Users\~1\AppData\Local\Temp\appv_server_patch_20140129153124.log
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleName = Hotfix for Microsoft App-V Server 5.0.1218.0 Service Pack 1 (KB2897087)
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleOriginalSource = KB2897087.exe
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleProviderKey = {bee44f0f-05be-48e4-81dd-d34a83600b95}
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleTag =
[10F0:07DC][2014-01-29T15:31:26]: Exit code: 0xb, restarting: No
I can see it says BaselineNotDetected but also says the TargetBaselineVersion = 5.0.1104.0 which is what we already have installed?

UNABLE TO INSTALL THE PACKAGED APPLICATIONS (DOCUMENT LIBRARY)

Created new workspace, and downloaded and tried to install Document Library
from http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#DOC_LIB .
Installed application just fine, but when Apex attempted to install the
supporting objects, it failed. It hangs for a while and then goes to “page cannot be displayed page” When I click on refresh, and I get an error.
When browse the tables under SQL Workshop, I noticed that none of the objects have been installed for that App.
When i try to run the application, i get the following error.
ORA-06550: line 3, column 19: PL/SQL: ORA-00942: table or view does not exist ORA-06550: line 1, column 17: PL/SQL: SQL Statement ignored ORA-06550: line 5, column 26: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 5, column 3: PL/SQL: Statement ignored ORA-06550: line 6, column 26: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 6, column 3: PL/SQL: Statement ignored ORA-06550: line 7, column 26: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 7,
Error setting workspace attributes.
Did anyone installed this APP? if so, was it successful?

Could be possible that Samsung Galaxy Fit Processor doesn't match with the system requirements of AIR. It should be ARMv7
http://www.adobe.com/products/air/systemreqs/MOBILE SYSTEM REQUIREMENTS
Android devices
VGA: Dedicated Cortex A8 (ARMv7) 550MHz App Processor with Neon for A8 only; Hardware Vector FPU
WVGA: Dedicated Cortex A8 (ARMv7) 800MHz App Processor; Hardware Vector FPU
Google Android™ 2.2 or later
-Pahup

Unable to install .p5p package in global zones in Solaris 11

Similar Messages

Maybe you are looking for