Unable to install Lion on new hard drive.

Hello,
My brothers laptop hard drive died so I am fixing it for him. I've replaced the hard drive, created a bootable USB Lion install by following http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/.
I plug in the USB, hold down option, select the USB drive, and I get the wheel spinning and apple logo. After two or so minutes it turns into:
Does anyone have any idea as to why I am getting this? I've tried changing which USB hub it uses, tried redoing the USB, used a different USB, verified the md5sum (145dc094527a8d5f5f601c7fa53d7577) all to no avail.

Most likely you have a non-functioning system. It could be because the flash drive was not partitioned and formatted properly before you created the system on it or a flaw in your cloning. Not knowing which specific model you have it could also be that the system you cloned is not able to boot the computer because the computer requires a different version of Lion.

Similar Messages

  • How do I install Lion on new flash drive?

    How do I install Lion on new flash drive?

    For an emergency pocket size boot device?
    Or something else?
    Or, do you want to setup the Lion Installer for clean or reinstalls on flash memory card, which is what many use?
    Create an OS X Lion Install disc
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
    USB on Intel Macs has always supported booting, that is what MacBook users have had to deal with. With a Mac Pro you have four internal drive bays, Firewire, and all of those are more suited and capable.
    Old thread, never die do they.

  • I need to deactivate this copy of Acrobat X to install on a new hard drive.

    I need to deactivate this copy of Acrobat X to install on a new hard drive.  When I click on help, there os no Deactivate or Activate.  Wjat do I do?

    I do not know.  I have a serial/key number for the software.  Can I
    install it again and use the same number?
    Denis

  • Can't install mountain lion onto new hard drive after old one had to be replaced

    My macbook pro, purchased 12/11, had a faulty hard drive.  We thankfully were still under warranty and had it replaced.  I then accessed the old drive via USB connector to reinstall my pictures and some file folders and apps to the new hard drive.  Now I am trying to reinstall the mountain lion update, and it says I can't install the the hard drive that appears as a choice as I use it for time machine backups?  Also, when the laptop tries to do a time machine backup, that stalls out as it says the hard drive is on the do not back up list, which incidentally won't let me select it to take it off of the do not back up list.  Help!!!

    Have you followed these instructions, specifically formatting your new HDD?
    http://support.apple.com/kb/ph11273
    Ciao.

  • How do I download mountain lion onto new hard drive

    My IMac 2.4  mid 2007 was starting to get very slow in opening applications. I rebooted the machine, it displayed the apple and then a circle with a line through it and would go no further. I have put it down to the hard drive, and have purchased a new one. My question is, how do I install mountain lion that I have already purchased to the new hard drive. I would appreciate any help on the matter

    You need to get your computer up to at least 10.6, using the original installer for your Mac, or a retail copy of 10.6.3. Then update to 10.6.8, and using the App Store, sign in with your AppleID, go to Purchases, and re-download and install 10.8.
    Matt

  • Can't install(format?) new hard drive

    I recently purchased a Wetern Digital Scorpio 250GB PATA HD for my Toshiba M35X-S114.  This was the drive recommened on the Toshiba Laptop Accessories page.  I physically instaled the new drive but can't figure out how to get it started.  I used the System Recovery DVD for my computer thinking I could install the original software on the new hard drive. The guy on the tech support phoneline said I could.  When I tried to use the recovery disc I got all the wall to the message where it prompts me to "press C for continue or A to abort".  When I press C, the cursor moves right below the prompt and just blinks.  The tech support line said the process may take several hours but I let it do this for for 3.5 hours and the cursor was still just blinking below the continue/abort message.  Is this normal?  Do I just need to be patient?  When I used the recovery disk on the old, original hard drive my computer was completely recovered in 45 minutes.  Oh, BIOS reads "none" next to hard disk.  I hope this helps.

    I emailed Hitachi support and got this response.
    It works. Just a pain!!
    Hard drives of SATA type interface does not have jumpers to configure. You
    can still use a SATA 3.0Gb/s drive (set to 3.0Gb/s) in your system, but it
    will only work at 1.5Gb/s.
    If your have a PC system, you can temporarily install the drive internally
    and use our utility called Feature Tool that'll allow you to change various
    ATA settings. This utility has the diskette and CD version. If you do not
    have a floppy drive and are unable to create a Feature Tool diskette, you
    can select the Feature Tool CD image. The fourth download link is for the
    image file. This file will allow you to create a bootable CD version of
    Feature Tool when a floppy diskette drive is unavailable. For instructions
    on how to properly use this file, please refer to the documentation
    included with your CD burning software.
    If you have any questions regarding the usage of Feature Tool, please refer
    to the User's Guide (see page 17 on how to change the drive capacity). The
    Feature Tool and User's Guide can be downloaded from the following URL:
    http://www.hitachigst.com/hdd/support/download.htm#FeatureTool
    Before running Feature Tool, ensure that your system boot sequence (in your
    system BIOS) is set to boot to your CD ROM drive as the first device.
    Insert the bootable Feature Tool diskette or CD that you created and let
    the system boot to this CD.

  • How can I reinstall Mountain Lion on new hard drive?

    I've had to install a new hard drive as old one was failing.
    Have loaded Snow Leopard from disc onto the new drive but can't install Mountain Lion which I was running prior to drive failure; very frustrated.
    Have tried several options.
    1. Tried to reboot from OS X Utilities but whenever I restart, holding the cmd + R keys, I can only ever get the standard screen. I've tried pressing keys early in restart, later in restart, keys on either side of the keyboard, cmd + alt/option + R but still can't get to the OS X Utilities.
    2. Having given up on 1 I've tried to download ML from my purchase history in iTunes. I can see the purchase recorded but there appears to be no way to get to a reload option - at least not in the iTunes loaded from Snow Leopard
    3. I tried downloading ML updates, hoping that might allow me to bypass 1 and 2. The download wasn't recognised by my machine.
    4. I've be willing to just buy the **** OS again from scratch but iTunes won't allow me to do that either, at least not using my current Apple ID.
    Does anyone have any bright ideas? I hate bloody computers.
    Mike

    enigmatix wrote:
    Csound,
    Do you have any suggestions why I can't open OS X  Utilities.
    Thanks,
    Mike
    How old is your Mac, if it came with 10.6 installed it is too old to have Internet Recovery (command-option-R) And as it has a new hard drive you won't be able to use Recovery (command-R) either until a new copy of Mountain Lion is installed and ceates a recovery partition on the drive.

  • Installing Lion clean on hard drive with multiple partitions

    I have a spring 2008 24" iMac running Snow Leopard.
    I am about to put a new 2TB hard drive in it and after I do that I want to do a clean install of Lion on it.
    I do not want to upgrade my Snow Leopard install to Lion. I will keep it on my back up drive as a fallback incase of serious workflow incompatiblities with the new OS.
    For my workflow I create and use multiple partitions (Mac OS,  Windows and multiple HFS+ for data) on my hard drive and I have seen that Lion creates it's own hidden recovery partition as well for the recovery functionality.
    My questions are:
    1) Will I have issues running Lion on a partition on a hard drive with multiple partitions that have different file systems?
    2) If I install Lion into one of these partitions will it create it's recovery partition within the space of the partition it is being installed into?
    3) I will be creating a clean install by downloading Lion using the App Store and then burning an installer DVD using instructions I found elsewhere and then using that to do the install on the new drive. Is that the best route to take?
    All my current data I will have on a backup external hard drive and after I complete the Lion install on the new larger drive I will manually reinstall all my software and move my data back from my backup drive to the new drive one partition at a time except of course for OS partition. I keep all my real user data outside of that partition anyway.

    I believe this article answers most of your questions.
    http://support.apple.com/kb/HT4718
    or possibly
    http://support.apple.com/kb/HT4649
    You will most likely run into the error message that "Some features of Mac OS X Lion are not supported for the disk" if you have multiple partitions set up, especially if they were not set up using Bootcamp and/or have serveral different file systems.
    You can confirm that the Recovery Partition will not be installed by checking Disk Utility for your current partition map scheme.
    This is most definitely not the end of the world as it is quite easy to create an external Recovery disk.
    1) No, you shouldn't have issues running Lion, but Recovery HD will not be created.
    2) No, and in your case it doesn't sound like it will be installed on your internal drive at all.
    3) Yes. If you begin with an empty partition, then install Lion that would be considered a clean install.
    Hope that helps.
    Autumn

  • Mavericks will not install on brand new Hard Drive

    Trying to install Mavericks to a brand new internal 2TB Samsung SATA 3.0 HD on a 3-yr old 12 Core Mac Pro system that was running Mnt Lion just fine. After multiple failures upgrading the Mnt Lion disk to Mavericks. Decided to just use a brand spankin' new hard drive and do a clean install of Mavericks. Now during the install to the NEW DRIVE, getting error message "Mavericks cannot be installed." Then I reboot and try to force the continuation of the install, doing this repeatedly, and I sometimes get a error log instead of a just an error message. Error log says: Thread 34 Crashed:: Dispatch queue: com.apple.root.high-priority.  Then the 1st line listed under that is: 0 libsystem_platform.dylib  0x000000010fa5a06a _platform_memmove$VARIANT$Nehalem + 138. If anybody knows what any of that means?
    Thanks.

    Without the full listing of the trace I can't be sure, however it would look more like a bonafide logic board or memory error rather than the HD that's causing  the problem. The low level drivers on Mavericks have obviously changed (otherwise it wouldn't be a different OS version) and possibly they're exposing a lack of performance in your memory. The actual Mavericks install may not be the problem, but rather being corrupted during installation. In the line you quoted, Nehalem is the Intel name for your CPU, the memmove operation failed (move blocks of memory contents from point A to point B) and they shared library containing this was in the system library....sort of critical stuff.
    You could try the following:
    Re-seat the RAM and try again.
    Try an old OS installation and see if it succeeds (Snow Leopard, Lion, Mountain Lion, etc)
    Try an install to an external enclosure
    If re-seating the RAM does the trick, then you're set.
    If it doesn't, then install an older OS to see if they work OK. If older OSes work OK using the internal drive and you have after market memory in the system, it would imply to me that the memory probably isn't quite up to snuff and Mavericks is exposing it. If it's original memory then it should be OK.
    If the older OSes now don't install correctly and it's giving similar problems try doing the install in an external enclosure. The point here being to try to move your data path off the internal SATA cable. If these install OK, try it with Mavericks. If any of these work it could be the SATA cable or I/O controllers on the logic board (SATA cable most likely).  A good reference for these sorts of problems is:
    Bad Hard Drive Signs and Symptoms
    Possibly a last option, which I would think (or hope) would be rare, would be that the binary for Mavericks install got corrupt during download. You could also try some of the resets they have in the linked document above. They might work and it doesn't take any effort.
    Good Luck

  • How to install lion cleaning the hard drive

    I have a MacBook I am currently running Liuon but have previously installed Leopard and Snow Leopard without clearing the hard drive first.
    The machine has now three operating systems installed and is running very slow.
    It has been suggested that I make a copy of the hard drive, before erasing all the information and loading Lion on a clean hard drive.
    How do i do this?

    Install Lion to a blank drive or partition, including one created with the Disk Utility, and then either use the Migration Assistant or copy your files to the new system manually as desired.
    (66830)

  • Migration Assistant issues and losing files (Mt. Lion on new hard drive)

    I just, by either dumb error or providence, migrated the contents of my backed up hard drive, which has my Mt Lion and all applications folders, to a new hard drive. The old and original drive on my 2008 Quad Mac Pro was starting to worry me. All of the applications and systems files appeared to have migrated flawlessly, and my calendar updated and my 20,000+ emails were restored. All of the programs/applications work. Everything appears normal, except data and obvious missing files. (Note I had installed Mt. Lion over  Leopard and Snow  Leopard previously, and did not rewrite the drive before I did that.)
    The size of this new drive is substantially less than the last one. On the latter, I counted more than 50 gigs of data, on the volume with all of the primary OSX documents. That is what I see in the Time Machine backup right before I did the Migration Assistant. The size of the same volume on the restored new hard drive that has my OSX is about 31 gigs.
    I did NOT run (by accident and perhaps curiosity) the Time Machine restore backup using disk utilities. Again I did, by accident or curiosity) Migration Assistant.
    What does appear lost are all of the Windows documents that were accessible on my portioned drive on my old hard drive, accessible only via VMWare. (I had all of those previously backed up, brute force, before doing this, and I'm not worried if I don't access them now since I have them if I need them). This was about 18 gigs of data I guess.
    Does anyone else have experience with using Migration Assistant and losing files that may have been on a partitioned drive (running Windows) and accessible by VMWare? I can still rewrite over the new drive I just formatted and do it all over again using disk utilities and running this from a boot jump drive I created before, but this time using Restore/Time Machine. I just had heard from one source it was best to download Mountain Lion first, and then do a Time Machine restore, which I ended up actually not doing.
    Thoughts appreciated.

    I just, by either dumb error or providence, migrated the contents of my backed up hard drive, which has my Mt Lion and all applications folders, to a new hard drive. The old and original drive on my 2008 Quad Mac Pro was starting to worry me. All of the applications and systems files appeared to have migrated flawlessly, and my calendar updated and my 20,000+ emails were restored. All of the programs/applications work. Everything appears normal, except data and obvious missing files. (Note I had installed Mt. Lion over  Leopard and Snow  Leopard previously, and did not rewrite the drive before I did that.)
    The size of this new drive is substantially less than the last one. On the latter, I counted more than 50 gigs of data, on the volume with all of the primary OSX documents. That is what I see in the Time Machine backup right before I did the Migration Assistant. The size of the same volume on the restored new hard drive that has my OSX is about 31 gigs.
    I did NOT run (by accident and perhaps curiosity) the Time Machine restore backup using disk utilities. Again I did, by accident or curiosity) Migration Assistant.
    What does appear lost are all of the Windows documents that were accessible on my portioned drive on my old hard drive, accessible only via VMWare. (I had all of those previously backed up, brute force, before doing this, and I'm not worried if I don't access them now since I have them if I need them). This was about 18 gigs of data I guess.
    Does anyone else have experience with using Migration Assistant and losing files that may have been on a partitioned drive (running Windows) and accessible by VMWare? I can still rewrite over the new drive I just formatted and do it all over again using disk utilities and running this from a boot jump drive I created before, but this time using Restore/Time Machine. I just had heard from one source it was best to download Mountain Lion first, and then do a Time Machine restore, which I ended up actually not doing.
    Thoughts appreciated.

  • Install to brand new Hard Drive

    13" MacBook Pro would no longer boot (2010 model). Took into the Apple store and they tell me the hard drive is fried.
    I bought a new hard drive, replaced it and held 'c' down during boot to load from the install DVD that came with the system when I bought it.
    I'm now forever stuck at the gray Apple logo with the gray swirly circle below it. Can hear the DVD spin up and down over and over - doesn't go anywhere.
    Can anyone tell me what's going on here and why I can't boot off this DVD to install the OS to this brand new hard drive?

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • Can't Install OS on new Hard Drive

    I just got a brand new iMac G5 with a bad Hard Drive. Apple sent a new hard drive but after I installed it I can't install the OS 10.4. I ran Disk First Aid and it says “Invalid extent entry, Volume check failed, ERROR: The underlying task reported failure on exit, 1 HFS volume checked, 1 volume could not be repaired because of an error.” I also can not run the Apple Care disc because I have a wireless mouse. I have installed no hardware upgrades.

    Like Mike said, erase fixes that type of error a lot of times. I have also had a lot of success using a program called DiskWarrior. It rebuilds the directory files and usually fixes errors like that without data loss.

  • Why won't my edited RAW images show after a LR re-install onto a new Hard Drive?

    Hi there. Recently my hard drive took a (hike) and crashed - data may or may not be recoverable (Geeks are working on that), and I needed to reinstall my CS5 and Lightroom software to a new hard drive (I had to buy a new one). All of my RAW photos are stored on an external drive and were not harmed, thankfully.  Here is my dilemma. Most of the presets I used also went crashing with that hard drive, (yes I believe they were backed up but also on that hard drive...stupid I know-trust me I know!!) but most of them were the free ones from the adobe recommended users on this site. I actually found many of my favorites still posted on the Adobe site and re-downloaded and installed the presets I'd been using the past year and a half, and imade sure those presets were housed properly in their folder via Preferences in Lightroom. Great. I can continue on with my work. WRONG! When I went to go import a recent shoot that I had already edited, it imported the RAW files but none of the previous edits I had worked on for these photos were showing up...it was as if I didn't even touch them and they came right from my camera. What in the world is going on? I'm baffled...and freaking out as I have thousands upon thousands of edited shoots in RAW, and I fear that none of the edits and enhancements made to those photos are going to be present and I'll have to start over. Please tell me that all of my last 2 years of editing photos are still with the RAW files?!!!
    I found a deal on a an HP Intell Core i7 processor) 2 TB hard drive tower, so I ended up needing to install the 64 bit versions of CS5 and Lightroom 3.6.
    I did test out the RAW (.NEF) file in Photoshop CS5 and my edited RAW image came up "correctly" - so I know that the information is still with the RAW image...I just need it to work and show in lightroom, as it is easier to export the files to the sizes I need them to be.
    Please be kind in your replies...I appreciate any help/guidance I can get on this. Plus the photos I need are for Seniors graduating in a few months here so you can imagine the panic mode is just a bit higher than normal. Many thanks.

    The default location for the backups created by Lightroom on exit is in the same folder as the catalog itself (i.e. that would be on the same faulty drive). It is, however, possible to redirect those backups to a different destination, such as a different hard drive.....but only you know if you did that or not. Do you have any other backups, e.g. drive level backups?
    Just to be clear, if you are importing afresh into a new catalog from Raw files that do have XMP sidecar files, you should see the final edited state from the previous catalog, but you won't see the individual history steps that got you there (as that's one of the things that are not included when you write XMP data from within Lightroom). If there is no XMP sidecar, you'll just get the original OOC image.

  • Installing Tiger on new Hard drive

    Archaic as it is, I would like to get Tiger to install on my Macbook.
    It originally came with Tiger, and then the hard drive recently crashed.  (Don't ask about back-ups, it's a sore subject).  I've replaced AND formatted the hard drive already.  However, when I boot from the Installer disc (10.4.9) which came with my computer and try to install, iit does not recognize the hard drive (I couldn't even use the disk utility to reformat it-- had to go a different route).
    So, the installer doesn't recognize the hard drive (at the "choose location" or whatever screen, it's blank)
    and
    the disk utility shows a partition, which exists and is formatted it to Mac Extended Journaled plus), but with the wrong name, and incorrect size.  The full drive is listed at 2.3 TB instead of 320GB.
    I have done a lot of reading on the internet about Tiger not being able to format a "large" drive.  But now that it's formatted, I don't quite understand why it wouldn't be able to see it.
    Thoughts?
    Thanks!

    Step by step:
    1. Turn on ur Macbook.
    2. Load the CD. Your macbook should automatically use it to boot since there is no OS on ur new hard drive.
    3. Follow the on-screen instructions to install tiger.
    It's a very easy installation process. Don't be scared.:)

Maybe you are looking for