Unable to join Unit Cost(Cost table) to Sales Table.
Hi All,
I am beginner for OBIEE technology.May be this question is silly for you but i am facing issue in it.I am mentioning my issue below:-
We have two tables one is SALES(Fact Table ) and second one is COST (Fact Table). I want to apply Calculation Measures on this logical tables(BMM Layer).As per Oracle document,when they are dragging Unit_Cost column from Cost table (Physical Layer) to Sales table then no logical source table is creating for them but when i am trying this then I am getting one more logical source table (COST).So my doubts are :-
1) Why is the other LST is creating for me?
2) I s there any join require between COST and SALES Table to remove this Logical source table(Cost)?
Please let me know if any clarification is require on this issue.
Thanks
Shashank Jain
it is correct. we you have two or more sources for same logical table obiee will create LTS for each source. you can't join these two fact tables physically but they will join using conformed dimension(common dim) based on physical schema design in physical layer.
Thanks
Jay.
Similar Messages
-
Billing table and Sales table relation
Hello,
How is the billing table and sales table related to each other. I meant which is the field that keeps relation between two tables?
Thanks
Rakeshvbrk and vbrp are billing tables.
vbak and vbap are sales tables.
likp and lips are delivery tables
vbkd is sales doc business data.
vbrp-vgbel = lips-vbeln.
vbrp-vgpos = lips-posnr.
lips-vgbel = vbap-vbeln.
lips-vgpos= vbap-posnr.
VBKD-VBELN = VBRP-AUBEL
regards.
santhosh
Message was edited by:
Santhosh Reddy -
Find org.unit of cost center
hallow
i have table of cost center and i wont to find all the or.unit of that belong to costcenters how i can do that?
RegardsHi
You need to Join two tables PA0001 and T527x as a data source in your query. Give the org units as a input parameter for this query.
Another way is to check the IMG settings where the functionals have mapped org units and cost center. Since I am an ABAPer so I dont know how they do it.
Reward points, if helpful.
Regards
Waz -
Unable to join the tables CDHDR, CDPOS
Hello,
I want to create a Query connecting tables CDHDR & CDPOS to extract cost center details which are changed. To be precise, when cost center details are changed using transactions KS02 & KS03, I want to extract those details and run the report. I am unable to join the tables using SAP Queries SQ01, SQ02, SQ03.
Kindly suggest me regarding the same.
Thanks in advance.
Regards
Sravan Mulumudi.Hi Jeve,
I was testing the report S_ALR_87012308, but this displays changes done to G/L accounts. I have tried every possibility. Could you please explain further ?
Regards
Sravan. -
Error while asssignment of Org unit to cost centre.
HI Frdz,
When I am traying to assign org unit to cost centre I got this error CALL_METHOD_NOT_IMPLEMENTED.
Experts pls let me know how to solve this error.
I maintained A\001 relation for cited above.
Thanks in advance.
Best regards,
Narayana KajaCheck the table T77S0
When you create relationships between cost centers and positions or
organizational units in Organizational Management, the system requires
that the cost center is assigned to a controlling area, as a cost center
must always be assigned to a particular controlling area. In this case,
the value of this entry will be used as the default for the controlling
area.
Let me know if you need more information.
Thanks,
Kiran.
Reward points are appreciated. -
Organizational Unit and Cost center.
Hi Experts ,
Thank in advance
<b>Can one let me know briefly about
Organizational Unit and Cost center and its
field name's as well and
related tables if possible</b>
Thank You and Regards
SantoshOrg Unit - ORGEH Check Table -T527X
Cost Centre - KOSTL Check Table - CSKS
For an employee they are maintain in PA0001.
For an organization in Table - HRP1000
OTYPE = O for organization
OTYPE = A for Cost Centre.
Relation ship betwen them is store in Table HRP1001.
Regards,
Amit
Reward all helpful replies. -
Org Unit and Cost Center not displaying in 0001 with A012 relationship
Hi Guru's,
Kindly help me in this regard ,
Whenever i hire a person to a position which has an A012 relationship (Chief Position) then Org Units and Cost centres are not getting displayed in IT0001 .
But when i hire a person in the same org unit with A003 relationship ; both Org units and Costcentres are getting displayed
I have used an LSMW for uploading relationships and objects and i have also run integration reports for the same but still i am not able to display org unit and cost centre in it0001 when i hire a person with A012 relationship .
Kindly Helpboth great advice, also, check this link:
http://help.sap.com/saphelp_45b/helpdata/en/14/d22fe48435d111950d0060b03c6b76/content.htm
within this information there are various reports to run, which help recon OM and PA integration. it will help you find your data problem and then fix the data for you if you follow step by step.
best regards,
michael -
Unable to join 3 fact tables in obiee data model.
Hi,
I am unable to join the 3 fact tables in obiee rpd. If I join with 2 fact tables I got the data in repors, Once I add the one more fact table and join with related dimensions, I am getting nodata error. I am following all joins keys as per datamodel, I am able to see the data in database. anyone pls give me the solution. Thanks in advance.
Edited by: 1007582 on May 23, 2013 2:17 AMCan you please give some more detail as in what you have model in RPD;
For example, if There are 3 Fact table F1, F2, F3 and two Dimesion Confirmed_D1, Non_Conf_D2. Confirmed_D1 is joined to all three fact tables and Non_Conf_D2 is joined to F2.
Now to implement this model we have to set the logical content level in BMM layer for Non_Conf_D2 in F1 & F2 to Total*. After this only we can report on Confirmed_D1, Non_Conf_D2, F1, F2, F3 whithout any error.
Sometime join with multiple table can also result in No Data, since the join conditions filters out the result data.
Please mark helpful or correct.
Regards,
Kashinath -
Table for Sales order Cost Est?
Cost estimate data for sales orders used to be kept in KEKO and KEPH -
Now that we've upgrade to 5.0 - there are only product cost estimates.
Anybody know the tables for sales orders?
thanksDear Althea,
please check with this tables.
VBAG Sales Document: Release Data by Schedule Line in Sch.Agrmt.
VBAK Sales Document: Header Data
VBAP Sales Document: Item Data
VBBE Sales Requirements: Individual Records
VBBS Sales Requirement Totals Record
VBDATA Update data
Regards
Mangal. -
Iphone 5 wifi unable to join network
iphone 5 wifi unable to join network issue
I am an engineer and I have tried every tweek to my airport router and unles you are standing 10ft from the ruter you get the unable to join network messsage.
naturally it work fine at the Apple Store who preformed a full reset on the phone. Other people are having this issue same a me and apple chooses not to acknowledge it, Maybe they will when I contact the consumer journalists at CNN ABC CBS & NBC news they love to here about Apple problems remember the Iphone 4 antenna issues!
APPLE ARE YOU PAYING ATTENTION!!!
AT LEAST ACKNOWLEDGE THIS PROBLEM AND SAY YOU ARE WORKING ON IT.
THINKOF IT THIS WAY
PEOPLE ARE GETTING PHONES EXCHANGED OUT AT APPLE STORES AND THE CARRIERS ONLY TO FIND THAT CHANGING THE PHONE DOES NOTHING REGARDING THIS ISSUE. THIS IS COSTING YOU MONEY AND WASTING YOUR STORE PERSONNELS TIME TROUBLESHOOTING A PROBLEM THAT ONLY THE HOME OFFICE CAN FIX!Dear Engineer...Apple does not read these posts. We are end users just like you
-
Cost centre field in sales order account assignment screen
Hello all,
I am unable to find the settings for cost center field in sales order account assignment tab screen along with profit center and internal order. kindly let me know the path to select cost center.
Thanks in advance
RajuThe Cost Center Determination settings is in OVF3 - but there are some cases where the Cost Center must be exceptionally changed.
If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01.
Alternatively, you can specify an order reason and assign a cost center to an order reason.
However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item.
The cost center are assign for such business transactions as :
- Free deliveries
- Returns
- Deliveries of advertising materials
You can also make cost center allocation dependent on the order reason, for example:
Order reason: Damage in transit
Order reason: Free sample
Both the IMG settings are done in transaction OVF3, either with/without the order reason. -
How to find the difference between Project costs & Cost center costs?
Hi all,
Can you please explain me ? What is project Cost & Cost center cost and which are the tables having those fields of project cost & cost center Costs? And how to find the difference between their costs ? And please give me the functional Idea about it?
Thanking you all in Advance...
Regards,
ChandruHi,
goto table COSP:
1) object-no. beginning with 'KS' refer to cost-centre
example: 'KSKOKA4711'
with KS, KOKA = controlling area and 4711 = cost centre
2) OBJNR beginning with 'PR' refer to projects / WBS-element
example PR00001234
Message was edited by: Andreas Mann -
*Internal Order* or *Cost Center* on SD Sales Order
Hi Gurus,
please can you tell me how we can set automatically Internal Order or Cost Center on SD Sales Order (without putting it manually).
Thank you very much
Kind Regards
AndreaHi Andrea,
As Ambrusa told, one Z table should be created where you can maintain order reasons, sales org, sales order type and the internal order no. as combination and use the below mentioned user exit.
When user create sales order, system will default the order reasons maintained in the z table and internal order no. will be picked as user select the order reason.
Hope this will meet your requirement.
Regards
Suresh. -
Easy cost planning in Project & sales pricing
Dear All
When i was trying to create easy cost planning from project, I am uable to get the costing variant. I have done basic settings.But the same is not working properly
Kindly advise me how do i do this?
I need to create easy cost planning from project and from project i need to create salespricing through DP91. I have assigned DIP profile in project profile.
Please advise
Regards
Deepu PillaiHi,
Yes, that is the key that determines how a cost estimate is performed and valuated.
Depending on the object being costed, either the functions of either unit costing or product costing can be used.To calculate the costs of producing a material, you create a product cost estimate with or without a quantity structure
In a cost estimate with a quantity structure, the costing variant determines the following:
1. Which dates are valid for the cost estimate itself and for exploding and valuating the quantity
structure.
2. How the BOMs and routings are selected to create the quantity structure
3. Which prices are selected to valuate the quantity structure
4. How overhead is calculated
You create a unit cost estimate to cost the following objects:
1.Materials (cost estimate without quantity structure)
2.Materials (additive cost estimate)
3.Production orders in Controlling
4.Internal orders
5.WBS elements
6.Base planning objects
7.Cost object IDs
8.Sales documents
In unit costing, the costing variant determines which prices are selected to valuate the individual costing items and how overhead is calculated.
Costing variants are also used to calculate costs for Production orders,Networks,Maintenance orders,
Run schedule headers,Process orders,Sales document items,Appropriation requests,Ad hoc cost estimates.
A costing variant is linked to the control parameters like Costing type,Valuation variant,
Date control (in costing with and without quantity structure).
For config of Costing Variant,
Go to SPRO- Project system-Costs-Planned Costs-Costing-Define Costing Variants
Hope this helps.
Regards
Tushar -
im on pay as you go.. still trying to set up wifi to my home network.. im putting in the password (sky broadband) and i keep getting the message
Unable to join the network...
driving me crazy now - please help !Other possibilities:
Your router firmware is out of date. Check the manufacturer's website for an update
You have MAC (Media Access Control) filtering enabled on the router, that restricts access to "known" devices and the new iPhone is not on the table of known devices
Your router has a setting limiting the number of simultaneous allowed devices
Your routers SSID ("name") is still the default (e.g., LINKSYS, DLINK, NETGEAR, etc). Your phone has encountered other routers with the same name as you have traveled, and the phone is confused as to which router is the real one. If your router's name is still the default you should change it.
Maybe you are looking for
-
I just downloaded the new version of I tunes on my old window computer before I did this when I connected my classic ipod the device would show up in a window on the left under devices and I would just drag playlist over from my library but now devic
-
Verification of text file content without using AUT
The AUT is generating a text file. The text file can not be opened in the AUT. How can I verify the content of the text file (e. g. with regular expressions)?
-
LiveUpdate 6-not running after last update
application not running after start win7x64, but I did not set anything and not even start pls. test application main PC: moth. H97 CPU: Corei-5 VGA: GTX 560Ti thx
-
Just bought a new MacMini and 20" cinema display. Its great! Opening those boxes got my grinning like a kid with a new toy. Anyway, I tried installing Tiger with the CD supplied with the MacMini on my iBook G4. Didn't work. Clicked restart on the OSX
-
How to call WEB Service From SAP
Hi Friends, How to call WEB Service From SAP. Thanks in advance, Murali Krishna K