Unable to launch PhPAdmin w/ previous version of mySQL?

I completed a course recently using a textbook that covered Dreamweaver's use with Coldfusion, ASP, and Php.  The actual course only covered the Coldfusion section.  As part of the coldfusion exercises, I installed mySQL 5.1.39 using a generic username and password.
I decided last month to go back through the book and cover the PhP sections.  I've installed WAMP 2.0 on the same machine. (I also installed WAMP on a new computer where I hadn't installed mySQL yet, so I've identified the problem.) When I try to start phpAdmin I get thess "Access denied for user 'root@hocalhost' (using password : NO) with additional comments to check the username password configuration.  But I can't find where to configure this in WAMP.  Can anyone assist?
PhPAdmin launches just fine on the computer I haven't previously installed mySQL.
Thanks in advance,
W!

Mr. Powers, thanks for responding.  I've also been googling this issue all weekend, and it looks like I'm not the only one that's encountered this problem. Attached is my confguration.inc file.  Be advised the original file had no password value.  Even when I added the password value, I was unable to launch the program.  Please note that the "auth" line was already set to "config " as you had recommended.  Any other suggestions? In a google thread you participated in a year or so ago, one of the solutions was to uninstall, then reinstall the existing mySQL application already in place prior to installing WAMP.  I'm just a bt hesitant to do that because I have already set up a number of test and class sites using Coldfusion to connect to mySQL, and I'm afraid I'll have to replicate those connections in DW and / or recreate the schemas in mySQL.

Similar Messages

  • How to Upgrade Previous versions of J2RE with Latest Version

    Hi,
    I want to distribute latest version of j2re over network thru SMS or GPO in AD Env. my prob. is i am unable to upgrade (overswite) the previous version with the new version. is there any way to do so?
    also the vulnerabilities reported in jre 1.4.2_05 & 06 which is resolved in jre 1.4.2_10 so if i have multiple installation in my system then is the system protected against vulnerability or not ? I beleive there can be more then one jre version on the system.
    Can anybody answer my question plz.

    Thanks a Lot ChuckBing for your early reply on this.
    but my question remains the same.
    Look below for further information.
    JRE 1.4.2_05
    Vulnerability: A vulnerability in the Java Plug-in may allow an untrusted applet to escalate privileges, through JavaScript calling into Java code, including reading and writing files with the privileges of the user running the applet.
    Source: http://sunsolve.sun.com/search/document.do?assetkey=1-26-57591-1Remarks : Vulnerability applicable to SDK and JRE 1.4.2_05 and earlier, all 1.4.1 and 1.4.0 releases, and 1.3.1_12 and earlier
    Fix : SDK and JRE 1.4.2_06 and later
    JRE 1.4.2_06
    Vulnerability: Seven (7) vulnerabilities with the use of "reflection" APIs in the Java Runtime Environment may independently allow an untrusted applet to elevate its privileges. For example an applet may grant itself permissions to read and write local files or execute local applications that are accessible to the user running the untrusted applet.
    Source: http://sunsolve.sun.com/search/document.do?assetkey=1-26-102171-1
    Remarks: Vulnerability applicable to SDK and JRE 1.4.2_08 and earlier
    Fix: SDK and JRE 1.4.2_09 and later (which include the 1.4.2_10)
    Question1:
    Is the system still vulnerable if we have 05,06...installed on the macine or its mandatory to uninstall previous version and install the latest one ?
    Question2:
    If yes is the answer for Quest. 1 then can we automate the upgrade for installing new version which will install the old version first ?
    awaiting replies....!

  • I have a Mac running OS 10.5.8. I downloaded Firefox 4 and not the program will not open at all. I am also unable to download the previous version that was running fine. I'm using Safari to contact you.

    I have a Mac G5 running OS 10.5.8. I downloaded Firefox 4 and now the program will not open at all. I get an error message that reads --
    "You cannot open the application 'Firefox" because it is not supported on this architecture."
    I am also unable to find a link to download the previous version (3.6) that was running fine. (I'm using Safari to contact you.)

    Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
    My solution; very simply use timemachine to restore the previous Frefox 3.x
    worked great in 3 mns

  • On a Mac, unable to install latest Flash Player 12.0.0.44--or reinstall previous version that worked

    I am on a Mac running the last version of Snow Leopard before Mavericks, 10.8.5.  I am unable to install the new Flash Player 12.0.0.4--at about the 50% mark on the installing bar, it stops and I get an error message that installation failed.  The version I had previously for some time, either 10. or 11. worked perfectly but I am not unable to reinstall any previous version either.  So I have a project I cannot run that requires Flash Player and can't watch videos. 
    I found someone in a forum who mentioned he'd seen several people on Snow Leopard unable to install Flash Player but his directions to overcome that which did work for someone who tried it, appear to be for PC's: from his first direction of right-clicking, I didn't get the option he says to click on that starts the process.
    Can anyone tell me how to install this new Flash Player in a Mac on Snow Leopard?  Should I trash all the new versions of the installer and the Flash Player Debugger Version 11.4.402.287 (11.4) that I have from a previous installment, prior to trying again?
    Thanks for any help.

    What I'm looking for is specifically the "General Installation Error", since it's 10.8.5.
    You're missing a file that was made visible by the 10.8.5 update. Hundreds of thousands of Mac users all over the world deleted it, not knowing what it was. It causes this when it's missing.
    Download this file: "Secrets" pereference pane
    And this one: mach_kernel.zip
    Install Secrets, and open your System Preferences.
    Open the Secrets Preference Pane, and check "Show hidden files"
    You'll need to press the "Quit this" button,
    and restart Finder, by right clicking the Dock icon.
    Then, place the mach_kernel.zip file in the Mac HD directory,
    and unzip it. You should see a "faded" mach_kernel file appear.
    Trash the zip file.
    Reopen your System Preferences and uncheck "Show Hidden files".
    Instead of quitting Finder and relaunching it, reboot your Mac.
    Your Flash Player installer won't quit anymore.

  • I am unable to launch Dreamweaver Trial version

    I am unable to launch Dreamweaver Trial version which I have just downloaded. I am running Mac OS X 10.6.8 and have also performed a software update. Can anyone advise? When launching the application, I get the following error: Adobe Dreamweaver CC 2014.1 cannot be opened because of a problem.  Check with the developer to make sure Adobe Dreamweaver CC 2014.1 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. 

    Dreamweaver 2014.1 requires OS X 10.7.5 or later to be installed.
    System requirements | Dreamweaver

  • With version 5.0.1 bookmarks are automatically updated when launching the application, which was not the case in the previous versions. Is it possible to avoid that ?

    I prefered the previous versions when the bookmarks did not update automatically when launching Firefox

    _VZ_ wrote:
    So the question is whether I can somehow coax the linker to give an error
    when these symbols are used?I guess you can - with a bit of a hack. You an probably use a map file telling linker to use only version SUNW_1.4.1 (or whatever version your client machines' have). This way you'll get errors about missing definitions up front:
    $ cat mapfile
    libCstd.so - SUNW_1.1.1 $ADDVERS=SUNW_1.1.1;
    $ CC -M mapfile  a.cc
    Undefined                       first referenced
    symbol                             in file
    std::string::~basic_string() a.o  (symbol belongs to unavailable version /export/opt/sunstudio12.1/lib/sparc/libCstd.so (SUNW_1.2))
    std::basic_ostream<__type_0,__type_1>&std::operator<<<char,std::char_traits<char>,std::allocator<char> >(std::basic_ostream<__type_0,__type_1>&,const std::basic_string<__type_0,__type_1,__type_2>&) a.o  (symbol belongs to unavailable version /opt/sunstudio12.1/lib/sparc/libCstd.so (SUNW_1.2))
    void std::string::__unLink() a.o  (symbol belongs to unavailable version /opt/sunstudio12.1/lib/sparc/libCstd.so (SUNW_1.2))
    ld: fatal: Symbol referencing errors. No output written to a.outSee Linker and Libraries Guide, section "Binding to Additional Version Definitions" (http://docs.sun.com/app/docs/doc/819-0690/chapter5-81344?l=en&a=view) for explanation and an example.

  • I am unable to print to the Lightning PDF software (by Avanquest Software) after updating to 6.02. It worked with the previous version of Firefox. Is there a patch or fix for this problem?

    I am unable to print to the Lightning PDF software (by Avanquest Software) after updating to 6.02. It worked with the previous version of Firefox. Is there a patch or fix for this problem?
    This is the error that is received:
    Cannot open file "C:\Users\Calandra\AppData\Local\Temp\Ask_a_Question__Firefox_Help.pdf". The process cannot access the file because it is being used by another process
    Any information that you can provide will be greatly appreciated.

    Sorry to say that, but the entire system seems ill-designed.
    If I understand correctly, then to add a new Section to a site, you have to subclass SubSection and somewhow integrate that into the system?
    I would be my expectation that you only need to subclass SubSection when you tried to introduce a new type of SubSection.
    The title & all other natural language Strings should never be hardcoded in Java code, but rather taken from some external storage (Database, XML, flat files, ...).

  • Unable to download previous version of Flash Player?

         I am unable to view flash videos on some websites and able to on others.  I have found many possible solutions on here and other websites but have not yet been able to fix the problem.  I have decided to try and revert back to the previous version of flash player and see if that would work.  I have followed and completed Chris Campbells post for cleanly uninstalling flash player:
    http://forums.adobe.com/message/4487439#4487439
         My problem however is that when I try and download a previous version from the archive page it never downloads.  It just keeps saying 'Loading...' forever.  How do I download the previous version?

    Can you try downloading the latest 10.3 release from these links?
    Flash Player 10.3 for Internet Explorer
    Flash Player 10.3 for other browsers

  • HT1349 I can not install iTunes on my PC, I get an error message: "Unable to remove the previous version of Apple Software Update". How should I resolve this problem.

    I can not install iTunes on my PC, I get an error message: "unable to remove previous version Apple Software Update"

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • Unable to launch Trial version of Elements 12  Using Windows 7  64bit

    Hi
    I am unable to launch the trial version of Elements 12.  I am using Windows 7  64 bit originally downloaded and used through a Mozilla Firefox browser.
    The photo editor starts to launch but then reverts to 'Quit' screen, with no further options

    Hi wolfrider,
    Please try running the application as' Administrator' and check.
    Was it running fine before?
    You can also try the following basic troubleshooting steps :
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-servic es-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and try installing and check.

  • Unable to install flash player after uninstalling previous version

    I am unable to download/install flash player and I had already uninstalled the previous version.  I had been playing farmville and my aol emails just fine and they both stopped working and I was told to try "updating" my flash player.  Well, I must have done something wrong because it uninstalled ok but now when I download it again, I get "did not pass the integrity check (1629.304.428)"  I also tried to reset IE 8 with no help.  This all worked until about 4 days ago and I don't remember updating anything within the last week so I am not sure what I did wrong.  Any help would be appreciated.  Thank you.
    My OS is Windows Vista 64 bit, web browser is IE8, 32 bit, and I don't have a flash player version according to the link that was provided to check, it keeps giving me the link for the general page with no version numbers.  Thanks!
    Michelle

    Download the executable installer(s) from http://www.adobe.com/products/flashplayer/fp_distribution3.html
    Make sure all browser windows are closed when you run the installer(s).

  • Unable to send x-file-name, x-file-size date in "x- requested-with = XMLHttpRequest" on new 7.0.1 version.Previous version its working

    I am using xmlhttprequest to send image in cross domain. in Previous version it was working fine, but on "7.0.1" version request doesn't contain x-file-name and x-file-size data.
    Request Header of version mozilla 7.0.1
    [Host] => localhost
    [User-Agent] => Mozilla/5.0 (Windows NT 5.1; rv:7.0.1) Gecko/20100101 Firefox/7.0.1
    [Accept] => text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
    [Accept-Language] => en-us,en;q=0.5
    [Accept-Encoding] => gzip, deflate
    [Accept-Charset] => ISO-8859-1,utf-8;q=0.7,*;q=0.7
    [Connection] => keep-alive
    [If-Modified-Since] => Mon, 26 Jul 1997 05:00:00 GMT
    [Cache-Control] => no-cache, no-cache
    [X-Requested-With] => XMLHttpRequest
    [Content-Type] => multipart/form-data-
    [Referer] => http://localhost/ajay_upload/tpl_upload_test_default.php
    [Content-Length] => 31082
    [Pragma] => no-cache
    Request Header of same code on Chrome:
    Array
    [Host] => localhost
    [Connection] => keep-alive
    [Referer] => http://localhost/ajay_upload/tpl_upload_test_default.php
    [Content-Length] => 188742
    [Cache-Control] => no-cache
    [Origin] => http://localhost
    [X-File-Size] => 188742
    [X-Requested-With] => XMLHttpRequest
    [If-Modified-Since] => Mon, 26 Jul 1997 05:00:00 GMT
    [X-File-Name] => 2.jpg
    [User-Agent] => Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/13.0.782.218 Safari/535.1
    [Content-Type] => multipart/form-data-
    [Accept] => */*
    [Accept-Encoding] => gzip,deflate,sdch
    [Accept-Language] => en-US,en;q=0.8
    [Accept-Charset] => ISO-8859-1,utf-8;q=0.7,*;q=0.3
    Thanks In Adv

    A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
    The helpers at that forum are more knowledgeable about web development issues.<br />
    You need to register at the mozillaZine forum site in order to post at that forum.<br />
    See http://forums.mozillazine.org/viewforum.php?f=25

  • I downloaded Firefox 5.0, hated it and went back to previous version but now I am unable to bookmark any new sites. How do I fix this?

    I can no longer bookmark any new sites. What do I need to do to correct this?

    When you say previous version did you really go all the way back to Firefox 3.5.3 which was released August 200'''9''' as is listed in your More system details...
    If you meant to use a Firefox 3.x release then you should at least use Firefox 3.6.18 which came out June 21. http://www.mozilla.com/en-US/firefox/all-older.html

  • Unable to install previous version

    Yahoo GameChannel uses Flash but did not work on my new
    laptop.
    I e-mailed Yahoo and received the following reply...
    Thank you for writing to Yahoo! Sports.
    I appreciate your inquiry with regards to MLB StatTracker not
    updating
    in real-time.
    Regretfully, the latest version of Adobe Flash is not
    compatible with
    StatTracker.
    If MLB StatTracker does not update in real-time please remove
    Adobe
    Flash Player version 9.0.124.0.
    Start -> Settings -> Control Panel -> Add or Remove
    Programs -> Remove
    Adobe Flash Player.
    Once you have removed Adobe Flash Player version 9.0.124.0
    please
    download Adobe (Macromedia) Flash Player 9.0.115.0.
    I downloaded the "previous versions" from Adobe and tried to
    install 9.0.115.0 but get the following error:
    "The Version of Adobe Flash Player ActiveX you are trying to
    install is not the most current version.
    Please visit
    http://www.adobe.com/go/getflashplayer
    to obtain the latest, most secure version."
    Why am I forbidden to install pervious versions that actually
    work, when the latest version does not work with my application?
    Please HELP! I need StatTracker/Gamechannel !
    Thanks,
    Majestyk007

    It shouldn't be necessary to reboot the computer to complete an update.<br />
    If a reboot is needed then that usually means that some (security) software is blocking files or you need elevated (UAC) permissions.<br />
    Run the Firefox program once as Administrator (right-click: Run as Administrator).<br />
    If that doesn't help then do a clean reinstall.<br />
    Download a fresh copy of Firefox ([http://www.mozilla.com/firefox/all.html]) and do a reinstall of Firefox on top of the current version.<br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.<br />
    <br />
    * [[Basic Troubleshooting#Clean reinstall]]
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)

  • 'Unable to Launch Application Error' - Java Web Start Running Under MS IIS.

    I am attempting to render the following .jnlp in MS IE:
    <?xml version="1.0" encoding="utf-8"?>
    <!-- JNLP File for LottoMadness Application -->
    <jnlp
       codebase="http://localhost/LottoMadness/"
       href="LottoMadness.jnlp">
       <information>
         <title>LottoMadness Application</title>
         <vendor>Rogers Cadenhead</vendor>
         <homepage href="http://localhost/LottoMadness/"/>
         <icon href="lottobigicon.gif"/>
       </information>
       <resources>
         <j2se version="1.5"/>
         <jar href="LottoMadness.jar"/>
       </resources>
       <application-desc main-class="LottoMadness"/>
    </jnlp>I've deployed the .jnlp, .gif, and .jar to MS IIS, running locally on my PC.
    When I attempt to render the .jnlp in IE I obtain an 'Application Error' window stating 'Unable to Launch Application'. Clicking details gives me:
    com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost/LottoMadness/LottoMadness.jnlp
         at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
         at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
         at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
         at com.sun.javaws.Launcher.launch(Unknown Source)
         at com.sun.javaws.Main.launchApp(Unknown Source)
         at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
         at com.sun.javaws.Main$1.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)I have configured MS IIS for Web Start, by setting the Extension/Content Type fields to .jnlp and application/x-java-jnlp-file.
    (The .jnlp is basically from 'Programming with Java in 24 Hours', as this is the book I am learning Java from.)

    AndrewThompson64 wrote:
    I am not used to seeing references to a local server that do not include a port number.
    E.G. http://localhost:8080/LottoMadness/
    I have deployed the following HTML (HelpMe.html) to the web server:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <html>
    <head>
         <title>Untitled</title>
    </head>
    <body>
    Help Me!
    </body>
    </html>When I attempt to render the URL in IE, I see the page just fine. The URL is use is:
    http://localhost/LottoMadness/HelpMe.htmlSo, I think my web server setup and usage is ok.
    >
    As an aside, what happens if (your MS IIS is running and) you click a direct link to..
    [http://localhost/LottoMadness/LottoMadness.jnlp|http://localhost/LottoMadness/LottoMadness.jnlp]
    When I click this link I get the error and exception I cited in my previous post.

Maybe you are looking for

  • Projector + Mac mini

    I recently bought a Toshiba MT200 projector and I'm looking at purchasing a new Mac mini (1.66GHz Intel Core Duo). The projector's native resolution is 854x480 pixels and I just wondered, when I connect the Mac mini to it via DVI, will the Mac mini s

  • Asset work Bench

    Hi Guys, Any idea how the Remaining life years and months is calucualted in Fixed assets Oracle? These feilds Remaining life years and months is in the financial information of the Asset Work bench. Thanks, RVV

  • Can SCOM 2012 be placed into Windows Azure to monitor on premise services ?

    We are wanting to relocate our SCOM management group into the cloud.  The SCOM management group is used to monitor multiple forests in multiple locations using SCOM gateways.  Firstly is this supported ?  has anyone in the community experience of run

  • REG:PEFORM IN SCRIPT

    HAI, HOW CAN I USE PERFORM IN SAP SCRIPT. HOW TO RETURN A VALUE FROM SUBROUTINE AND <u><b>HOW WILL I PRINT IT IN SCRIPT.</b></u>EXPLAIN WITH EXAMPLE. IS IT REQ A 'WRITE_FORM" FUNCTION. THANK YOU ASHOK KUMAR

  • Force "new pages" to open in same tab?

    Obviously, some pages want to open in a new window. I have it now so that if I click on a "new page" link using the apple key, it opens in a new tab. However, is there a way to force that page destined for a new page/tab to open in the SAME TAB - pos