Unable to locate Authentication Rules

Running BM38PS2 and NW6.5. Getting "Unable to locate Authentication Rules" when using NTRADPING. I've created the DAS and DAS policy, configured the LPO and have assigned it to the test user. The server running radius has a R/W of root and a trustee on the LPO. What did I forget?
Daryn

Nospam,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses: http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Access rejected; Unable to locate authentication rule

Does anyone ever post in here just to say "Hi! I'm not having a problem
- everything's running just GREAT!"?
Nah, I didn't think so. <grovel> Volunteer sysops are the greatest, and
I appreciate the unpaid time you put into helping us poor slobs out.
</grovel>
I've set up a new container within eDirectory, and am trying to
configure RADIUS (3.28, March 6 2003 - I know, an old version... but
it's working great!) to allow users within that container to VPN in via
our Cisco VPN concentrators.
For my effort, Bordermanager's RADIUS screen tells me "Access rejected"
and "Unable to locate authentication rule".
In NWAdmin, I have done the following:
Gotten details on my new container and checked the "Enable Dial Access"
box in the "Dial Access Services"... uh, tab(?) and put the fully
qualified name (radius.ou.o) of my RADIUS service in the "Dial Access
System" field. Do I have to browse NDS to populate this field, or can I
just type it in?
Gotten details on [Root] -> Security -> Login Policy -> Rules and
modified my RADIUS service by adding my new container to the list.
Gotten details on my RADIUS service -> Username Resolution and added my
new context.
If memory serves, these are the three magic things I have to do for our
users to VPN in... but I still get the "Unable to locate authentication
rule" message.
Do I have to bounce my Bordermanager box for these changes to take effect?
Thanks for any help.
John

Hi John,
From your RADIUS.NLM version it appears that you're running BMAS 3.6. With
this version of RADIUS you don't have to bounce the box for login rules to
take affect, but you do need to reload ADM.NLM. ADM.NLM will not pick up
changes to your login rules "on-the-fly." (For the benefit of others reading
this, please note that BorderManager 3.8 does not use ADM.NLM and will pick
up changes to login rules on-the-fly.)
The fact that you're getting the "unable to locate authentication rule"
means that much of your configuration is correct. You don't need to change
any of the settings on your user, container, or DAS objects. RADIUS is able
to locate the user object and is handing the user's DN and password to
ADM.NLM for authentication.
Assuming that you have the latest version of ADM.NLM, this error also means
that ADM is able to resolve your login policy object, and can see at least
some of its attributes on this object. From your other posts in this thread
it sounds like you're using NWAdmin to manage your login rules and you've
verified that your replicas are in sync, so that rules out the most common
causes of this error.
Do you have the latest version of ADM.NLM? If I remember correctly, the
latest version is 2.67. (I'm going from memory here, so if you see something
newer on the download site, use it.) As I recall, version 2.66 fixed a bug
with the login rules that might be related to your problem.
>>> John Bodoni<[email protected]> 3/2/2005 2:52 PM >>>
Does anyone ever post in here just to say "Hi! I'm not having a problem
- everything's running just GREAT!"?
Nah, I didn't think so. <grovel> Volunteer sysops are the greatest, and
I appreciate the unpaid time you put into helping us poor slobs out.
</grovel>
I've set up a new container within eDirectory, and am trying to
configure RADIUS (3.28, March 6 2003 - I know, an old version... but
it's working great!) to allow users within that container to VPN in via
our Cisco VPN concentrators.
For my effort, Bordermanager's RADIUS screen tells me "Access rejected"
and "Unable to locate authentication rule".
In NWAdmin, I have done the following:
Gotten details on my new container and checked the "Enable Dial Access"
box in the "Dial Access Services"... uh, tab(?) and put the fully
qualified name (radius.ou.o) of my RADIUS service in the "Dial Access
System" field. Do I have to browse NDS to populate this field, or can I
just type it in?
Gotten details on [Root] -> Security -> Login Policy -> Rules and
modified my RADIUS service by adding my new container to the list.
Gotten details on my RADIUS service -> Username Resolution and added my
new context.
If memory serves, these are the three magic things I have to do for our
users to VPN in... but I still get the "Unable to locate authentication
rule" message.
Do I have to bounce my Bordermanager box for these changes to take effect?
Thanks for any help.
John

Unable to create Picking Rule

Hi Gurus,
I am unable to create picking rule in N->Inv->Setup->Rules->Picking using this navigation.
I have created rule and selected required parameters in the screen, click on save, getting message as "1 transaction completed, saved", If i query same name in Inventory picking rule form, unable to locate the same.
Please let me know where I miss the setups, profile option for seeing created picking rules.
Thanks
AK

Just Enable it in the header, goto tools and generate the corresponding package.
If you are in R12+, then you will also need to associate it with an organization by clicking on assign button.
Thanks,
Hrishi

Messaging Server 4: WebMail login returns "unable to locate the server"

When I log into WebMail, the following error occurs: 

Netscape is unable to locate the server hostname.
Please check the server name and try again.

End User

First verify that you cannot reach the hostname
server by using the ping
utility (Windows NT or Unix). If
you cannot reach the host, report this problem to the appropriate system
administrator or help desk.

However, if you can reach the host with ping
, then the problem may be a minor
networking issue that you can resolve. There is also the possibility that
the network has been configured to allow users to ping
unreachable systems. You can use the
following actions to rule out possible sources of the problem: 

<OL>
<LI>Attempt to log in to WebMail again. If you can log in successfully, then
the problem with the WebMail server may have been temporary or is an
intermittent problem.

<LI>End the current browser session and then restart the browser and try to
connect to the WebMail server again. If you can log in successfully, then,
most likely, the browser had cached some old network information that was
reset when you exited the browser.

<LI>Verify the DNS configuration of your system and then restart the entire
system.
</OL>

If the above actions do not work, then you will need to contact the
system administrator or the help desk.

Mail Server Administrators

As the problem with connecting to the WebMail server is caused by configuration
or availability problems, make sure that users who report this problem have
HTTP network connectivity to the hostname. The following scenarios are
possible causes of connectivity problems: 

<UL>
<LI>Users have the wrong proxy.
<LI>Users are being blocked by firewalls.
<LI>Users are connecting from the wrong network.
<LI>Users specify the incorrect DNS servers.
</UL>

In addition, users may also report that the server is down. As the login page
for WebMail does not contain URL links that are FQDNs or absolute path names,
it is possible that users may still be able to see the login window if it was
cached or loaded before the server stopped working.

In some cases, it may be necessary to access the hostname that is used in the
WebMail links. This hostname setting is stored in the configdb
parameter
service.smtp.messagehostname.
This configuration setting is not mentioned in the Messaging Server
documentation.

The messagehostname is a
configuration value that affects many server functions. For this reason, do
not make changes to this value without first considering the effects of such a
change on other WebMail settings, such as the postmaster group and user
mailhost values. Also, please note that changing messagehostname
is not supported from Console.

For more information on messagehostname
, please see "What is messagehostname?"
at 
article 4250

You can also find documentation for configutil
in the Messaging Server Administrator's
Guide at the following URL: 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887

Note: You must stop and restart the HTTP service in order for changes to
the messagehostname to
take effect.

When I log into WebMail, the following error occurs: 

Netscape is unable to locate the server hostname.
Please check the server name and try again.

End User

First verify that you cannot reach the hostname
server by using the ping
utility (Windows NT or Unix). If
you cannot reach the host, report this problem to the appropriate system
administrator or help desk.

However, if you can reach the host with ping
, then the problem may be a minor
networking issue that you can resolve. There is also the possibility that
the network has been configured to allow users to ping
unreachable systems. You can use the
following actions to rule out possible sources of the problem: 

<OL>
<LI>Attempt to log in to WebMail again. If you can log in successfully, then
the problem with the WebMail server may have been temporary or is an
intermittent problem.

<LI>End the current browser session and then restart the browser and try to
connect to the WebMail server again. If you can log in successfully, then,
most likely, the browser had cached some old network information that was
reset when you exited the browser.

<LI>Verify the DNS configuration of your system and then restart the entire
system.
</OL>

If the above actions do not work, then you will need to contact the
system administrator or the help desk.

Mail Server Administrators

As the problem with connecting to the WebMail server is caused by configuration
or availability problems, make sure that users who report this problem have
HTTP network connectivity to the hostname. The following scenarios are
possible causes of connectivity problems: 

<UL>
<LI>Users have the wrong proxy.
<LI>Users are being blocked by firewalls.
<LI>Users are connecting from the wrong network.
<LI>Users specify the incorrect DNS servers.
</UL>

In addition, users may also report that the server is down. As the login page
for WebMail does not contain URL links that are FQDNs or absolute path names,
it is possible that users may still be able to see the login window if it was
cached or loaded before the server stopped working.

In some cases, it may be necessary to access the hostname that is used in the
WebMail links. This hostname setting is stored in the configdb
parameter
service.smtp.messagehostname.
This configuration setting is not mentioned in the Messaging Server
documentation.

The messagehostname is a
configuration value that affects many server functions. For this reason, do
not make changes to this value without first considering the effects of such a
change on other WebMail settings, such as the postmaster group and user
mailhost values. Also, please note that changing messagehostname
is not supported from Console.

For more information on messagehostname
, please see "What is messagehostname?"
at 
article 4250

You can also find documentation for configutil
in the Messaging Server Administrator's
Guide at the following URL: 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887

Note: You must stop and restart the HTTP service in order for changes to
the messagehostname to
take effect.

OD Master/PDC, 10.4.11, why xp clients unable to locate domain controller?

After a migration/upgrade from 10.3.9 to 10.4.11 Server, windows XP clients are intermittently unable to log in to or even bind to the PDC running on that server.
I did a clean format and install from the 10.4 media, choosing the standalone server type, and applied all the Software Updates, I got forward and reverse DNS working for my zone, then I followed the instructions at http://www.afp548.com/article.php?story=20050615173039158 to move my OD from a working 10.3.9 server to 10.4.
This server goes against the usual recommendations, as it provides DNS, OD master, PDC and file services to 32 clients all in the same subnet, 20 running Windows XP SP2 and 12 running OS X Client 10.4.x or 10.5.x.
File services and various other users of the OD/LDAP, for example Wildfire Jabber/XMPP server and Apache2/LDAP running on a separate Linux server, are able to authenticate against the new 10.4.11 OD.
However, at this point the symptoms become intermittent approx. 40% of the Windows XP clients were unable to log in with various domain accounts, yielding errors of the form "Unable to find domain FOO". If I remove a client from the domain by joining it to WORKGROUP and rebooting, then try to join FOO again, I'll get an error, "Unable to locate Domain Controller for FOO..."
The set-up:
My server's FQDN is myserver.foo.example.com
The server's DNS is authoritative for the 10.10.10.0/24, foo.example.com zone and I have the trailing dot's in the right places, so ping myserver.foo.example.com, ping myserver, and ping 10.10.10.10 (server's example IP from the foo.example.com zone) all work correctly.
The DHCP server for this vlan is providing my DNS server to the clients, but is providing no netbios server. The XP clients are all set to use the DHCP server setting, which, according to the TCP/IP Advanced Settings panel, means that they'll revert to netbios over tcp/ip since no wins server is specified.
In Server Admin->Windows->General:
Role: Primary Domain Controller (PDC)
Description: FOO Domain at example.com
Computer Name: myserver
Domain: FOO
Server Admin->Windows->Access:
Allow Guest Access: Check
Client Connections: Unlimited
Authentication: NTLMv2 & Kerberos, NTLM, and LAN Manager: All check
Logging->Log Detail: High
Advanced->Code Page: Latin US
Services: Workgroup Master browser and Domain master browser: check
WINS Registration: Off
Homes: Enable virtual share points: check
Should my Windows service on 10.4.11 be providing WINS or not? If so, should the DHCP server be set to point the clients to it? If not, how do the XP clients reliably resolve the FOO domain?
Why did all these XP clients work fine with a 10.3.9 Windows PDC but don't work with 10.4.11?
Another strange point - I can use the XP-side 'net view' command to poke around and things look reasonable. I.E. even the clients that aren't joined to the domain and can't locate the domain controller will return sane results for 'net view /domain:FOO'.

The new PDC does use the same domain name as the old PDC, and the SID mismatch is at least partially to blame. After I'd performed the upgrade and confused the windows clients, I saw the advice on using samba's net command to duplicate the old PDC's SID to the new PDC. Maybe someday I'll have the opportunity to try that.
I resorted to removing all the XP clients from the domain and re-joining them. The XP clients were still able to contact the domain intermittently. I used various command-line tools on the XP side, including the built-in net command as well as some others I downloaded such as the quite useful http://www.joeware.net/freetools/tools/findpdc/index.htm, as well as the client-side error messages during the domain join attempts and the messages in the Event log, to determine that the clients couldn't find the domain.
The XP client TCP/IP settings state that the clients will revert to using netbios if no WINS server is specified, but that clearly wasn't working reliably, so I just enabled the WINS server on the PDC, told the DHCP server to hand out its address for the netbios-related options for that subnet, rebooted the PDC, waited a while for things to settle out, and now all the clients can reliably find the PDC.
I still have no idea why the WINS-less set-up worked in 10.3 server but didn't work in 10.4 server, but believe me, I'll remember it now!

CR 6.1 - Unable to locate lens profile automatically

Raw files from Canon camera are correctly identified and lens distortion is corrected automatically, but on jpgs from same camera I get this error: "unable to locate lens profile automatically".Can't even do it manually as lens profile that is available for raw file is missing from drop down menu on jpgs. Also weird because it does show some lens profiles in drop downs, just not the right one. But, again, right one is there for raw files. Weird!

That is because lens profiles for raw and non-raw are necessarily different and separate (like color profiles). We have more raw lens files available than non-raw lens profiles (e.g., Canon 70-200 lenses). As a general rule, I would encourage you to be applying lens corrections via profiles at the raw stage in CR, rather than to JPEGs/TIFFs (given a choice between the two), because of various technical advantages in the former case.
Eric

Unable to locate the xml-definition for FieldName with FieldId

On a site collection of SP2013 on-premise farm, I found there are many similar log occur every minute. The logs are like:
Unable to locate the xml-definition for FieldName with FieldId '56747800-d36e-4625-abe3-b1bc74a7d5f8', exception: Microsoft.SharePoint.SPException: Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) ---> System.Runtime.InteropServices.COMException:
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
at Microsoft.SharePoint.Library.SPRequest.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
The log level is medium. The same set of log occur every minute with same set of 60 different GUIDs. All related function on the site is working as expected. By using PowerShell to loop thru the site collections I confirmed there is no field using these
GUID. Also I have checked the content database and configuration database, also no luck to finding these GUIDs.
These logs should be related with the search service since the Authentication Authorization log mentioned it is the "Crawler" account in action. However I have no idea why the crawler keep looking for these GUID. I have reset the farm service multiple
times already.
The farm was upgraded from SP2010 and it seems no such logs before upgrade.
Any advice? Thank you.

Hi Mark,
From your description, this issue ocurred after you upgraded SharePoint 2010 to SharePoint 2013. Is it right?
Whether you have some solutions in SharePoint 2010.
If yes, please make sure you deploy the solution in SharePoint 2013 well after you upgraded to SharePoint 2013.
There are some similar posts, please check if they are useful for you:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/5fa900f0-8a1d-4ce8-9ef8-d6e599106834/unable-to-locate-the-xmldefinition-for-fieldname-with-fieldid?forum=sharepointdevelopmentprevious
http://shipoint.com/2013/03/22/fixing-unable-to-locate-xml-definition-for-ctype-with-spcontenttypeid-in-sharepoint-2010/
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I just backed up my 3gs iphone using itunes. All my photos and contacts have disappeared from my phone. I am unable to locate them on my computer. HELP!!!

I just backed up my 3gs iphone using itunes. All my photos and contacts have disappeared from my phone. I am unable to locate them on my computer. HELP!!!

OK, I understand. Try this ... it's much safer. It will simply restore your backup, but not do anything to your iOS:
While your iPhone is plugged in to iTunes, right click on the iPhone icon on the left side of the iTunes display.
Choose "Restore from backup ..." from the pop-up menu that appears.
Again, what this will do is place that backup back on your iPhone without changing iOS. So you should be very confident in the backup contents before doing this.

Unable to locate timecode in batch capture

Hi there, I have been working on this problem for a while and would really appreciate some help.
I have a documentary project I have been working on for some time and have completed the EDL. I am now trying to batch capture the footage again in full res and am having problems with a couple of the tapes.
First the specs:
The video was shot on a Sony HDR-HC1 in HDV(1080) mode.
I am using this camera to capture the footage.
I am trying to recapture the footage in a sequence with the easy setting on HDV1080i50.
I had originally captured the footage in SD on an older version of final cut pro (I am now working with FCP6) and didn't realise that my 16:9 footage was actually all 4:3 letterboxed. To fix this problem I used the media manager to export and then in the new project batch capture all the footage again from the tape. The project uses 18 tapes, 16 of which were batch digitised with only minor troubleshooting required. However 2 of the tapes are proving to be very problematic. It seems that whatever clip I select on the tape it gives me a message saying "unable to locate timecode".
I have tried setting the tape to the exact location of the clip before selecting the batch capture, but the computer always seems to look for a spot which is 2-3 mins out of sync with the clip. For example, if the in point is 00:10:00:00 the computer will roll the tape to around the 00:12:00:00 mark and start jogging around there for about 30 seconds until eventually giving me the "unable to locate timecode" message. Looking in the information in the bins, the in and out points are accurate, its just that when I try to capture, the computer rolls the tape to the wrong position.
If anyone knows a workaround for this that will help me avoid having to edit the footage all over again I will be extremely grateful.
Thanks
Liam

HI I have the same problem, the capture window says: Waiting for time code, the device must set in vcr mode and then This operation could not be complete as there is no video, the F!#!%$$ problem is very illogical ,at this mooring I do batch capture without a problem but since the second tape this problem starting, I update to FCP 6.0.4 and,. @@#%#@%#$ the first tape capture but the second not capture and the problem starting againd, note that IMOVIE capture the tape and work very well, iI replace fire wire, camera VCR and , I trayu with Canon, Sony, JVC and the problem persist , I have quicktime 7.4.5, FCO 6.0.4, note that I have two Macs with the same problem in both macs IMOVIE work like a PRO edition Software but FCP is very bad, I have with this problem a long time, I formated Mac, reinstall FCS2 many timers and the problem persist. IS not a problem whit easy setup or wherever , I download the FireWire SDK from Apple and test all connection with the applications of sdk and in all case , the camera and the fire wire are OK, the problem is with quicktime and FCP, If any one is working OK with FCP and DV NTSC devices and JVC PRO HD devices, please tell us HOW DO. I'm working with FCP since 2000 and in this month FCP makes me very UNHAPPY.

Unable to locate external device after upgrade

i have been using FCE 2.0.3 and mac os 10.3 to view clips on video monitor (tv) easy set up was dv pal. so i chose view and and then firewire from the FCE menu to review clips on video monitor through my cannon mv750i-worked ok until recently. I have also been able to capture as well. Nothing wrong with the camera as it works ok in another computer (power pc) which has mac os 10.4.7 but fce is still 2.0.3. So is something i am not doing?
i then upgraded to mac os 10.4 and fce to 3.5 and easy set up also at same dv pal and a window message comes up informing me that "unable to locate external device" or you have changed system configurations. I have made sure that the camera is on. so please can someone tell me what i can do?

When I recently upgraded from OSX 10.3.9 to OSX 10.4.7 I found that FCE 3.0 would not recognise the camera.
When I upgraded to QuickTime 7.1.2 the problem immediately disappeared.
http://www.apple.com/quicktime/download/mac.html
Ian.

I Tunes unable to locate music ?

I have just spent 7 hours updating our i-Tunes account. I successfully deleted the extra copies of tracks,located missing files,updated the library and then backed up the whole of i-Tunes.
I then backed up the whole I-Mac to an external drive and was busy patting myself on the back for an excellent job when I thought I would just check and see everything opened properly after a shut down. I didnt.
When i opened i-Tunes I could see all my albums,all the artwork,all the playlists, all the music files perfectly organised as I had left them.
BUT when I clicked on a tune to listen to it, i-Tunes gave me a mesage saying i-Tunes was unable to locate the music file ? I followed the link path to where the music was stored, user\music\ i-Tunes\ i-Tunes media etc and there was all the music as I had left it ??
When I clicked on any file in i-Tunes it could find it, but when I click on the media folder with the music in it opens i-Tunes up perfectly and plays my tune. I've tried emptying the whole i-Tunes library and then restoring it from i-Tunes folder but I get multiple copies of the allbums, missing artwork, missing files, some albums have one or two tunes missing and some are completely duplicated, e.g. I can see two copies of each track in the album..........I cant believe it ! why is i-Tunes so frustrating ? all I want it to be able to see one copy of each track on each album and keep it that way.
Is it something to do with my library ? is that corrupted ? should I delete the library and create a new one ? how do I do that ? How, (once I've got it back to how I want it) do I save everything and ensure it doesn't go reading something corrupt again. This is a nightmare...HELP

The exclamation mark for missing files is shown if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. Changing the path to the media folder won't fix the links to files you've moved by hand.
Select a track with an exclamation mark, use Ctrl-I to get info, then say no when asked to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions. I can provide a step by step guide if you give me the two paths.
In some cases iTunes may be able to repair itself if you go through the same steps and locate the lost track. It may then offer to attempt to automatically fix other broken links. Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes. I would suggest you untick Edit > Preferences > Advanced > Keep iTunes Media folder organized before you start so that things don't have to move around as they are repaired.
tt2

I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv. I've been unable to locate an app that will do this.

I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.
I've been unable to locate an app that will do this. The Photos app that comes with the phone or iPad has extremely limited duration controls. PhotoStream seems to load everything from my phone or iPad not allowing me to just load up a set group of images.
iPhoto for iPad is getting some terrible recent reviews. I tried a couple other free apps but they don't use Airplay.
I can do something like this with iPhoto and my MB Air, but it's kind of ugly to have the computer open in order to connect by Airplay to my Apple TV. I've thought the iPad or iPhone would be a lower profile controller.
Am I out of luck?

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

HT1918 I am unable to locate where to change the phone number that is associated with my itunes account.

I am unable to locate where to change the phone number that is associated with my itunes account. I have a new number and the old number is no longer accessible by me. I've logged into my iTunes acct and it seems I can only change my appleID itself, my billing address info, and password and things like that. I cannot find where to remove a number and add a new one. I've gone to my mobile devices (iphone, ipad) as well as my mac and I'm getting a bit frustrated with it. I'm sure there's a simple solution and I'm just missing it. Going to settings>messages>send&receive....there is the old number and no option to make a correction. I've unchecked it but why can't I add the new number? On my iphone the ONLY option that shows up is my current number but when I set up my new ipad I have the issue described here. I want this number completely removed from my account there has to be a way to get it out of the system.
Also when going to settings>facetime>you can be reached at: shows email addresses as well as the OLD phone number with no option to make the correction, remove the incorrect number, or add a new number. I figured this was tied in to my appleID since thats when it showed up (right when I signed in on my ipad). So I went to itunes on my mac and went to my account and there I find AppleID Summary, itunes in the cloud, purchase history, and settings. I've gone through each of those and am still unable to figure out where to change it. Somebody PLEASE tell me where to find this data so I can change it. I've seen multiple inquiries about this all over the internet but everyone's solution is to do exactly what I've already done. No resolution to the real issue.

Apple will have it, but if there is ever a question/problem, the store that you made the exchange at will have it on record.
But if you're worried about it call 800-APL-CARE and see if they have it.

Today, I got a "update iTunes and tonight, I can't access my iTunes. I uninstalled and reinstalled and the error message reads: iTunesexe-unable to locate component. App has failed to start due to MSVCR80.dll was not found: Reinstall may fix" but hasn't.

I received an iTunes update today and updates files. Tonight, I couldn't acces my iTunes. I uninstalled and reinstalled and still getting same error message: iTunes exe unable to locate component. This application has failed to start because MSVCR80.DLL was not found. Reinstalling the application may fix this problem. I've done it several times and still get the error. I'm fearful I have lost all my music. What can I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe-Unable to locate component - "this application has failed to start because CoreFoundation .dll was not found," Reinstalling did not fix problem.

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
"This application has failed to start because CoreFoundation.dll was not found. Re-installing the application may fix this problem.
I uninstalled and re-installed itunes and the message still appears.
How do I fix this??
Thank you

With that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?

Unable to locate Authentication Rules

Similar Messages

Maybe you are looking for