Unable to login to system through sapgui

Hi Guru's,
I am stuck with an issue wherein the SAP system is up and running, In SAP MMC console the status is green but while accessing the abap system through sapgui i am not able to login to the system the dev_w0 shows only "patchcomment MSSQL connect error handling
Kindly let me know what could be the issue
Regards
Abhishek

Hello.
Did you perform any major activity before this error observed ? Any system refresh or something else ?
It seems a database schema problem, please try to go through the Notes 683447 or the script mentioned in the Note 551915.
Thanks

Similar Messages

  • Can't login, the system through me back to the login window.

    I need help. Once I tried to login under admin account but the system through me out after accepting a psw. It happens like it checks the psw shows the blue screen and then return to the login window. Meantime I can succesfully log in under another user account. I tried to change psw and login but it doesn't help. The system is friendly accepting the admin psw for all the possible aims but not the login. Before that happend the system was blaiming me for overfulled hard drive. Now I cleaned it but that doens't help. What shall I do, in order to log in, what is wrong?
    I have a time machine copy but recovery of admin user folder didn't help. Many thanks in advance for your assistance!

    You can use the install DVD to reset the password, repair the disk and repair permissions. If you don't have the install DVD you could try the following.
    Print the following and then follow these instructions very carefully - at each stage wait for processes to complete - spaces are important:
    1 - shutdown
    2 - start in single user mode by holding command (Apple key) and S while it starts
    3 - type the following and hit the return key to repair the disk
    /sbin/fsck -fy
    4 - type the following and hit the return key
    /sbin/mount -uw /
    5 - type the following and hit the return key
    rm /var/db/.AppleSetupDone
    5 - type the following and hit the return key
    shutdown -h now
    6 - start the Mac
    7 - The above tricks the Mac into thinking it is starting for the first time. Follow the various processes as normal but DO NOT use a name that has been used on the Mac before. It will set up a new admin account without removing existing accounts with different names.
    8 - Use the new admin account
    9 - If necessary enable the root user (see Mac help) to reset passwords on other accounts.

  • Unable to Connect to SAP through SAPGUI

    Dear all,
    We have a PI 7.11 dual stac ksystem on Linux, oracle.
    we are able to connect to the server through putty, but not able to launch xmanager as it is sayign XDMCP error....
    Also unable to connect to SAP through SAP GUI
    we are getting wsaewouldblock resource temporarily unavailable
    I am connecting to servers through CISCO VPN......
    Thanks,
    Murali L.

    [root@PIPROD work]# ps -ef | grep dw
    pipadm    2042 23763  0 19:34 ?        00:00:01 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    root      8373  6880  0 19:52 pts/1    00:00:00 grep dw
    gdm      17480 17397  0 15:48 ?        00:00:00 /usr/libexec/gdmgreeter --gtk-module=gail:atk-bridge:/usr/lib64/gtk-2.0/modules/libkeymouselistener:/usr/lib64/gtk-2.0/modules/libdwellmouselistener
    pipadm   23763 23690  0 17:28 ?        00:00:00 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    pipadm   23777 23763  0 17:28 ?        00:00:08 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    pipadm   23778 23763  0 17:28 ?        00:00:05 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    pipadm   23781 23763  0 17:28 ?        00:00:10 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    pipadm   23783 23763  0 17:28 ?        00:00:04 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    pipadm   23786 23763  0 17:28 ?        00:00:03 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    [root@PIPROD work]# more stderr1
    (23762) New Child Process created.
    (23762) Starting local Command:
    Command:  ms.sapPIP_DVEBMGS00
               pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    [root@PIPROD work]# more stderr2
    (23763) New Child Process created.
    (23763) Starting local Command:
    Command:  dw.sapPIP_DVEBMGS00
               pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    Thu Oct 20 17:28:21 2011
    DpVmcInit: initialize vmc
    DpVmcInit: vm lib loaded
    DpVmcInit: vm linked with kernel
    DpVmcInit: vm native libs loaded
    ICM up and operational (pid: 23775) ***
    [root@PIPROD work]# more stderr3
    (23764) New Child Process created.
    (23764) Starting local Command:
    Command:  ig.sapPIP_DVEBMGS00
               -mode=profile
               pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
    NiInit3: NI already initialized; param 'maxHandles' ignored (init=1;par=202;cur=2048)
    ***LOG Q0I=> NiPConnect2: 172.28.30.45:3300: connect (111: Connection refused) [nixxi.cpp 3142]
    ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 7
        (SI_ECONN_REFUSE/111; I4; ST; 172.28.30.45:3300) [nixxi.cpp    3142]
    [root@PIPROD work]# more dev_ms
    trc file: "dev_ms.new", trc level: 1, release: "711"
    [Thr 47613442779232] Thu Oct 20 17:28:21 2011
    [Thr 47613442779232] ms/http_max_clients = 500 -> 500
    [Thr 47613442779232] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
    systemid   390 (AMD/Intel x86_64 with Linux)
    relno      7110
    patchlevel 0
    patchno    81
    intno      20020600
    make       multithreaded, Unicode, 64 bit, optimized
    pid        23762
    [Thr 47613442779232] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 23762) [msxxserv_mt. 2174]
    [Thr 47613442779232] SigISetDefaultAction : default handling for signal SIGCHLD
    [Thr 47613442779232] load acl file = /usr/sap/PIP/SYS/global/ms_acl_info
    [Thr 47613442779232] MsGetOwnIpAddr: my host addresses are :
    [Thr 47613442779232]   1 : [172.28.30.45] PIPROD (HOSTNAME)
    [Thr 47613442779232]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr 47613442779232] *** ERROR => NiHsLGetHostName: NiPGetHostByAddr failed (rc=-1) [nixxhsl.cpp  527]
    [Thr 47613442779232]   3 : [192.168.122.1] 192.168.122.1 (NILIST)
    [Thr 47613442779232] MsHttpInit: full qualified hostname = PIPROD
    [Thr 47613442779232] HTTP logging is switch off
    [Thr 47613442779232] set HTTP state to LISTEN
    [Thr 47613442779232] *** I listen to port sapmsPIP (3600) ***
    [Thr 47613442779232] *** I listen to internal port 3900 (3900) ***
    [Thr 47613442779232] *** HTTP port 8100 state LISTEN ***
    [Thr 47613442779232] CUSTOMER KEY: >Z2073759310<
    [Thr 47613442779232] build version=711.2009.08.31
    [Thr 47613442779232] Thu Oct 20 17:28:35 2011
    [Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
    [Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
    Edited by: Murali Lakkoju on Oct 20, 2011 4:14 PM

  • Unable to login: SAP System Message: Dynpro does not exist

    Hello All,
    I'm created a test system to practice our upgrade post steps on.  I created a pared down copy of one of our other systems.  When I try to login, I get a popup message saying: Dynpro does not exist.
    To create the pared down version, we used empty files for:
    COEP  
    GLPCA 
    BALDAT
    MSEG  
    BSIS  
    LIPS  
    LTAP  
    CE1LPOC
    ZHYPFIT
    BALHDR
    VBFA  
    COSP  
    COSB  
    CDCLS 
    ZHYPF2A
    /IRM0760
    CDHDR     
    COSS      
    CMFP      
    CHVW      
    RESB      
    ZHYPFIO   
    AUSP      
    VBOX      
    JCDS      
    VBAP      
    We don't think these being empty is the problem, but I wanted to mention it just incase it is. 
    Below is the dev_w0 log.  I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
    Any insight you might have into this would be appreciated.  Thank you.
    ~TJ
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      79
    M sid        Q60
    M systemid   324 (IBM iSeries with OS400)
    M relno      7000
    M patchlevel 0
    M patchno    172
    M intno      20050900
    M make:      single threaded, Unicode, 64 bit, optimized
    M pid        6396
    M
    M 
    M Thu Jan 22 15:12:50 2009
    M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c   1290]
    M  ThInit: running on host USALSAPU
    M  calling db_connect ...
    C  DB4 SQL Reparse Activated
    C 
    C Thu Jan 22 15:12:51 2009
    C  R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
    C  R3INLPGM: RmtExeLib is KRNQ60700
    C  DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.                                   
    C  DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
    C  === Central DB connect successfull! ===
    C  === Connection settings ===
    C  connected               = TRUE
    C  con_hdl                 = 0
    C  db_handle               = 1
    C  dbhost                  = USALSAPU
    C  rdbname                 =                  
    C  dblib                   = R3Q60DATA
    C  r3sysle_changed         = TRUE
    C  query_compl_reval       = O
    C  dbconnecttype           = L
    C  user                    = Q6079    
    C  qaqqinilib              = Default (QUSRSYS)
    C  dbjobname               = WP00     
    C  dbjobuser               = Q6079    
    C  dbjobno                 = 197762
    C  rmtexelib               = KRNQ60700
    C  parallel_alter_tables   = *OFF
    C  ===========================
    C  Found only default query options in QUSRSYS/QAQQINI.
    C  -
    C  -
    DbSl EGO Structure
    C  -
    C     SAPSYSTEMNAME               = Q60
    C     Character encoding          = UNICODE
    C     process class               = dialog process
    C     workprocess id              = 0
    C     local host                  = USALSAPU
    C     dbhost                      = USALSAPU
    C     rdbname                     =                  
    C     dbname                      = Q60USALSAPU
    C     dblib                       = R3Q60DATA
    C     application server          = DVEBMGS79
    C     Connect type                = LOCAL
    C     pid                         = 6396
    C     wpjobname                   = WP00
    C     wpjobuser                   = Q6079
    C     wpjobno                     = 197762
    C     DB2/400 vers. appl. server  = PASE 1
    C     DB2/400 vers. DB server     = V6R1
    C     da_cache_size               = 100
    C     reopen                      = ON
    C     timeout_retry               = 3
    C     ODP threshold               = 800
    C     ODP commit thresh.          = 810
    C     ODP open thresh.            = 850
    C     QAQQINI library             = Default (QUSRSYS)
    C     Alternate QAQQINI library   = Not specified
    C     use_lobs_for_long           = ON
    C     use_lobs_for_short          = OFF
    C     single_execution_threshold  = 2000
    C     single_execution_reuse      = OFF
    C     keep_tmp_SQLpkgs            = OFF
    C     dbsl_trace                  = OFF
    C     allow_cancel                = Try (Unspecified)
    C     nqe_optimize_method         = O - All I/O (compatibility mode)
    C     nte_list_size               = 10
    C     dbsl_alternate_package      = OFF
    C  -
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20090122 151250 USALSAPU       
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0x7000002d0000000, size: 120000000)
    M  SHM_ROLL_AREA          (addr: 0x7000002e0000000, size: 268435456)
    M  SHM_PAGING_AREA          (addr: 0x7000002f0000000, size: 335544320)
    M  SHM_ROLL_ADM               (addr: 0x700000310000000, size: 2672386)
    M  SHM_PAGING_ADM          (addr: 0x700000320000000, size: 820256)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0x700000330000000
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12176 bytes (50 server) at 0x700000340000000
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  <ES> Info: use normal pages (no huge table support available)
    X  ES initialized.
    B  dbntab: NTAB buffers created
    B  dbntab: Buffer FTAB(hash header)  (addr: 0x700000360000088, size: 584)
    B  dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
    B  dbntab: Buffer FTAB(item array)   (addr: 0x700000360138ad8, size: 5120000)
    B  dbntab: Buffer FTAB(data area)    (addr: 0x70000036061aad8, size: 122880000)
    B  dbntab: Buffer IREC(hash header)  (addr: 0x700000370000088, size: 584)
    B  dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
    B  dbntab: Buffer IREC(item array)   (addr: 0x700000370138ad8, size: 1280000)
    B  dbntab: Buffer IREC(data area)    (addr: 0x7000003702712d8, size: 15360000)
    B  dbntab: Buffer STAB(hash header)  (addr: 0x700000380000088, size: 584)
    B  dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
    B  dbntab: Buffer STAB(item array)   (addr: 0x700000380138ad8, size: 1280000)
    B  dbntab: Buffer STAB(data area)    (addr: 0x7000003802712d8, size: 3072000)
    B  dbntab: Buffer TTAB(hash header)  (addr: 0x700000390000088, size: 2976)
    B  dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
    B  dbntab: Buffer TTAB(item array)   (addr: 0x700000390139430, size: 3200000)
    B  dbntab: Buffer TTAB(data area)    (addr: 0x700000390446830, size: 23360000)
    B 
    B Thu Jan 22 15:12:52 2009
    B  dbstat: table statistics switched on for 84171 tables
    B  dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 23, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
    B  dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 104857600
    B  ***LOG BB0=> buffer TABL       started with length 350000000  bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
    B  dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
    B  dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 17590656
    B  ***LOG BB0=> buffer TABLP      started with length 35840000   bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
    B  dbtbxbuf: Reading TBX statistics:
    B  dbtbxbuf: 29 object entries precreated
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 416 = 416
    B  2: 23 * 40 = 920
    B  3: 80021 * 48 = 3841008
    B  4: 40000 * 256 = 10240000
    B  5: 80021 * 8 = 640168
    B  6: 1 * 200 = 200
    B  7: 513 * 8 = 4104
    B  8: 262473 * 256 = 67193088
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
    B  ***LOG BB0=> buffer EIBUF      started with length 80000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of ESM   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 416 = 416
    B  2: 23 * 40 = 920
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 256 = 512000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 13500 * 256 = 3456000
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer ESM   (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
    B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of CUA   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 416 = 416
    B  2: 23 * 40 = 920
    B  3: 40009 * 48 = 1920432
    B  4: 20000 * 256 = 5120000
    B  5: 40009 * 8 = 320072
    B  6: 1 * 200 = 200
    B  7: 193 * 8 = 1544
    B  8: 65617 * 512 = 33595904
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer CUA   (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
    B  ***LOG BB0=> buffer CUA        started with length 40000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of OTR   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 416 = 416
    B  2: 23 * 40 = 920
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 256 = 512000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 81 * 8 = 648
    B  8: 13500 * 256 = 3456000
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer OTR   (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
    B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
    B  dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
    B   max_blocking_factor =  20,  max_in_blocking_factor      =  40,
    B   min_blocking_factor =  10,  min_in_blocking_factor      =  10,
    B   prefer_union_all    =   0,  prefer_join                 =   0,
    B   prefer_fix_blocking =   1,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   1,  alias table FUPD            =   1,
    B   escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x00,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    M 
    M Thu Jan 22 15:12:53 2009
    M  SecAudit(RsauInit): Start init of Security Audit Log for first wp.
    M  SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
    M  SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
    M  SecAudit(RsauShmInit): SCSA size................ = 4096
    M  SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
    M  SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
    M  SecAudit(RsauShmInit): SHM version.............. = 5
    M  SecAudit(RsauShmInit): SHM Slot version......... = 2
    M  SecAudit(RsauShmInit): RSAU active.............. = 0
    M  SecAudit(RsauShmInit): number of slots possible. = 10
    M  SecAudit(RsauShmInit): number of slots requested = 2
    M  SecAudit(RsauShmInit): number of slots used..... = 2
    M  SecAudit(RsauShmInit): user selection........... = 0
    M  SecAudit(RsauShmInit): max size of one file..... = 0 KB
    M  SecAudit(RsauShmInit): max size of all files.... = 102400 KB
    M  SecAudit(RsauGetCurrentProfile): Init of shared memory completed
    M  SecAudit(RsauGetCurrentProfile): Security Audit Log not active
    M  SsfSapSecin: automatic application server initialization for SAPSECULIB
    N  SsfSapSecin: Looking for PSE in database
    N  SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
    N  SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client:    , key: SYSPSE, len: 1872)
    N  SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
    N  MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
    N  MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    M  CCMS: AlMsUpload called by wp 0.
    M  CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
    M  CCMS: start to initalize 3.X shared alert area (first segment).
    S 
    S Thu Jan 22 15:12:54 2009
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 0x18499b440
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  2 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 400
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 0x700000460000070
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 0x700000460000740
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2272 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A 
    A Thu Jan 22 15:12:55 2009
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
    A  Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
    A  abap/pxa = shared unprotect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
    A  >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
    A  >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
    A  RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
    A  RFC Options> H=USALSAPU,S=79,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 47822 bytes at 0x7000004f0000000
    N 
    N Thu Jan 22 15:12:56 2009
    N  SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...completed with return code 5.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.172.20050900]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [17]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  VSI: WP init in ABAP VM completed with rc=0
    E 
    E Thu Jan 22 15:12:58 2009
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M 
    M Thu Jan 22 15:13:03 2009
    M  SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
    A 
    A Thu Jan 22 15:13:07 2009
    A  *** ERROR => RFC ======> cannot open SAPGUI
    [abrfcio.c    8185]
    A  RFC 1729  CONVID 62379446
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
    A  RFC> ABAP Programm: SAPLSLDAG (Transaction: )
    A  RFC> User: DDIC (Client: 000)
    A  RFC> Destination: SERVER_EXEC (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SLDAPPL_SERV)
    A  RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
    FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
    [abrfcio.c    8185]
    A  *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    [abrfcio.c    8185]
    A  RFC 1729  CONVID 62382527
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
    A  cannot open SAPGUI
    A  RFC> ABAP Programm: SAPLSLDAG (Transaction: )
    A  RFC> User: DDIC (Client: 000)
    A  RFC> Destination: SERVER_EXEC (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SLDAPPL_SERV)
    A  RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
    FUNCTION: 'exec_sapgui'
    FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
    [abrfcio.c    8185]
    A 
    A Thu Jan 22 15:13:14 2009
    A  *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
    FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    [abrfcio.c    8185]
    A  RFC 1729  CONVID 62392457
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
    A  FUNCTION: 'exec_sapgui'
    A  cannot open SAPGUI
    A  RFC> ABAP Programm: SAPLSLDAG (Transaction: )
    A  RFC> User: DDIC (Client: 000)
    A  RFC> Destination: SERVER_EXEC (handle: 3, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SLDAPPL_SERV)
    A  RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
    FUNCTION: 'exec_sapgui'
    FUNCTION: 'exec_sapgui'
    FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
    [abrfcio.c    8185]
    B 
    B Thu Jan 22 15:13:16 2009
    B  table logging switched on for client '010'
    M 
    M Thu Jan 22 15:13:22 2009
    M  AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER     /QXDARECVR )M  *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c   1548]
    M  *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [             0]
    A  A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Jan 22 15:13:22 2009
    A 
    A  ABAP Program SAPMSYST                                .
    A  Source SAPMSYST                                 Line 1770.
    A  Error Code DYNPRO_NOT_FOUND.
    A  Module  $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
    A  Function dyrdyp.c Line 545.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_RABAX
    A  Dynpro does not exist.
    A 
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Thu Jan 22 15:13:23 2009
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Jan 22 15:13:23 2009
    A 
    A  ABAP Program SAPMS380                                .
    A  Source                                          Line 0.
    A  Error Code DYNPRO_NOT_FOUND.
    A  Module  $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
    A  Function dyrdyp.c Line 545.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_SAPDEXT
    A  Dynpro does not exist.
    A 
    M  ThIUsrDel: th_rollback_usrdelentry = 1
    M  ***LOG R47=> ThResFree, delete (001024) [thxxmode.c   1384]
    S 
    S Thu Jan 22 15:14:20 2009
    S  found spool memory service RSPO-ACTIONS at 0x70000046000a478

    Hi TJ,
    you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
    But, based on that data, I do not know which ones ;-(
    There are dynpro tables like dynpload or d3456t or so not proper ...
    Regards
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

  • Unable to login after system update

    I recently installed arch in my lenova laptop. Installation went fine and I updated my system then. Finally I had a kernel 3.4.4-2 and rebooted.
    After rebooting, I got the login screen (tty1) . I had not created an user yet. So had to login as root.
    So When I enter the username as root and click enter , the password credential request is not getting loaded. After a space of 10 seconds, I am again redirected to login request.
    I have never had this issue and I have been using arch for the past 8 months. Please advice

    I am still stuck. The other thread that I mentioned was dicussing about adding hook to mkinitcpio because /usr was in a separate partition. That is not the case in my problem.
    I rushed to close this thread before resolving my issue. the issue is still persisting. I could not login to the machine at all. And my partitions are as listed below
    sda1 - /
    sda5 - /home
    sda6 - /opt
    sda7 - /var/cache
    sda8 - swapspace
    Again, I couldnot login once after updating the system. I could login before. Please advice

  • Unable to Login remote server through WSX

    Hi all,
    I am new to WSX and I have installed WSX 1.0.2  with workstation 9 and I am able to login using local admin. Also I am able to add a server which is in my network. but I couldn't login to that server to access VMs shared in that server. my username has been added in that server as administrator. Please help.

    Found the solution here:
    http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
    Workaround:
    Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
    Extract the .msu file with a tool such as 7-Zip.
    Open an Admin command prompt and change directory to where you extracted the .msu.
    Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
    Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
    Use the tools as per usual.

  • SAPNWCE71TrialSP1Preview_CompEnvServer - login error through SAPGui.

    Hi all,
    I have successfully installed SAPNWCE71TrialSP1Preview_CompEnvServer on windows XP. In MMC, all the process and services are running. But I am not able to log on to the system through sapgui 640 as well as 710.
    The error log is as follows.
    Sapgui 710 [Build 8991] Thu Oct 11 20:06:11 2007
    : 'connection to partner '10.10.145.50:sapdp01' broken
    Do you want to see the detailed error description?
    Sapgui 710 [Build 8991] Thu Oct 11 20:06:30 2007
    : 'connection to partner '10.10.145.50:sapdp01' broken
    Time          Thu Oct 11 20:06:11 2007
    Component     NI (network interface)
    Release          710
    Version          39
    Module          nixxi.cpp
    Line          4355
    Method          NiIRead
    Return Code     -6
    System Call     recv
    Counter          11
    Please provide me a solution to overcome this error.
    regards,
    Siby Syriac.P, Mathrubhumi, Kozhikode, Kerala,India. Ph.099950606202

    Hi Abhi,
    Don't be impatient, we are close to solve the problem.. I forgot to mention in my last reply..
    Please try to login through the GUI after each of the below step to see if its success or not
    1) please check if your database is ON or not. for this you login to the machine as <sid>adm, and open command prompt, then type
    sqlplus "/as sysdba";
    show sga;
    show sga shows the memory assigned to the oracle. if oracle is not up, sqlpus "/as sysdba" will give a output as connected to idle instance. (if oracle is not up, start it by running statup command)
    2) Please go inside the Start > Programs > Administrative Tools > Services and see whats the service you have for SAP. it will be like SAP<SID>_<nn> where <nn> stands for the instance no#. and <SID> is for your System ID. (Please post in your next reply What are the services you find starting with SAP* and whether they are in Started status or not. - it not started, right click , start)
    https://service.sap.com/sap/support/notes/1202542
    3) Please check if there is an entry of below in the /etc/services file. and make sure that 3600 is not assigned to any other services. (that you can find out by making a search on 3600 in the services file)
    sapms<SID> 3600
    4) Make entry 127.0.0.1 in the application server field of GUI where you're giving "localhost" and try.
    Regards,
    Debasis.
    Even though it doesn't look like a gui problem as of now, but I need to mention, its always recommended to have the latest GUI patch or release level if possible.
    For these entries every separate word should be separated by a tab key, and if you put these at the end of the corresponding file, make sure you press a blank Enter key.
    sapms<SID> 3600
    sapdp 3200
    Edited by: Debasis Sahoo on Oct 9, 2008 12:26 AM

  • Auto login into system in lan

    Hi.
    I want to login into system through java code.Without manullay giving user name and password of that particular PC in LAN .please give some example code if possible.

    Here's some description about how to achieve this for web-based intranet applications.
    http://jcifs.samba.org/src/docs/ntlmhttpauth.html#transparent

  • Parallel How many times user can login to the SAP system through ITS

    Hello all
    We are using the ITS ---620 and following 46D R/3 system 
    R/3 system details:
    Kernal :
    kernel release :46D
    O/S :SunOS 5.8 Generic_108528-05 sun4us
    We would like to now, At a time How many times user can login to the SAP system through ITS
    Kindly letus know  if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
    Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
    We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
    System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
    I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
    Thanks

    I have searched all docs and notes.
    Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
    The functionality does not exist for SAP Gui for HTML.
    Regards,

  • Unable to login to IDES system after client copy

    Hi guys
    the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
    The client copy failed due to a shortdump in the process.
    Now i am unable to login to the client 800 as it says the user password is incorrect.
    How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
    i do have access to client 000.
    please guide me what should i do? i need the client 800 back and should be able to login too.

    hi,
    i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
    I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
    anyways thanks for your inputs
    Hi guys,
    any idea?
    Edited by: Workflow  learner on Jun 2, 2008 10:48 AM

  • Unable to login to Web console through xelsysadm.

    Hi All,
    I am unable to login to the web console through xelsysadm.It doesn't show any error message, but the process bar goes on for some time and then shows the session is expired. I have a delegated admin with 5 users.
    The users present in this group are able to login with in second span of time.But Xelsysadm is unable to login.
    Can any one help me on this.
    Thanks in Advance.

    Both the field has a value 0 in database. when I enter the credintials and submit it, the status bar goes on for a long time and its not enterning into web console.the login page appears for long period with status bar progressing and it even stay in that state for 24hrs with out logging in.
    But wen I use delegate admin, he is able to login with in seconds of time.

  • Unable to send mails to outlook from sap system through workflow

    Hi ,
    Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is  there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
    Please find the errors belows that  traced from sost t code
    02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
    02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
    02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
    02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
    Regards
    RAGHAVENADAR

    Hello,
    Actually i checked the mail ID for WF-BATCH  using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
    But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
    So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
    ABAPer is sending mails through work flow.
    Regards
    RAGHAVENDAR M

  • AST 1.5.3 but unable to login through netboot in 2010 to 2012 model.older

    MRI Server - Unable to run MRI or netboot 2010 to 2012 macbook newer model
    MRIServer 2.2.1 (169)
    AST 1.5.14v25

    Dear sir,
    Here the AST means Apple Service Toolkit (1.5.3), this tools is not properly run from Early 2011 to new model 2012/13.My AST version was before 1.5.2 but have updated to the new version 1.5.3.After updating it was not run properly.I have reinstall 10.6.3 server os & installed AST from 1.4 to 1.5.3 with os update 8,9,10,11.
    Please give me the help how would be run properly & the setup assistance step.Because i am unable to login neboot through those model.
    Rgds,
    Dipankar

  • Unable to login to update the photoshop or the illustrator through the Creative cloud dock in Mac

    I am unable to login in the Creative cloud dock in Mac but am able to login in their website with the same ID and password. Everytime i try to update, it asks for authentication but is not accepting the details.
    I tried to contact support through chat, but they never seem to be available.

    Sunilbabuvk I believe you are being prompted to enter your administrator password.  You can find details regarding the installation process at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.  If it is asking for your administrator credentials then you will want to enter the same information you use to log into your computer.

  • Hi, I am unable to login to SAP system

    Hi,
    I am unable to login to SAP system. How could I login to SAP SYSTEM?

    if ur unable to login into the sap system.
    go to the sap market place . get the keys and open the lock.
    u will login into the sap system.
    how many times u will ask the same questions in all the forums...........

Maybe you are looking for

  • Access to a external time capsule through my home time capsule

    How can I access my parents timecapsule through my own at home? I have no problems in accessing my own time capsule through for example the network at work (using Automator - and a quite old apple Airport/router). But if I'm at home, and on the home

  • Using sqlldr when source data column is 4000 chars

    I'm trying to load some data using sqlldr. The table looks like this: col1 number(10) primary key col2 varchar2(100) col3 varchar2(4000) col4 varchar2(10) col5 varchar2(1) ... and some more columns ... For current purposes, I only need to load column

  • File structure and hierarchy in Aperture.

    Hi, everyone. I am trying to import folders with images into Aperture and, much to my surprise, have found that this process is everyting but intuitive and straightforward. My library (outside of Aperture) is made up of folders each corresponding to

  • System Prefs in OS X with SSD Boot Drive

    I tried an OWC SSD last fall as the boot drive in my Quad-Core Mac Pro and liked the speed but had issues with wake from sleep or booting. I use a UPEK fingerprint scanner for the admin PW and sometimes the unit would boot to the login dialog box wit

  • Users are having PC with Windows 7 as OS

    Users are having PC with Windows 7 as OS. They are not able to work on Oracle Application, Oracle Forms. They are facing issues, like IE crashes as soon as the Oracle Application web page is accessed/Form open.