Unable to open a file in Application server

This path exist in the Application server.
        DR1/interfaces/Esker
ORDHIST - This is the File name in whihc i need to save the data.
I had specified the whole path as DR1/interfaces/Esker/ORDHIST
I am trying to upload the data from the Internal table to the above specified file ORDHIST.
It is not opening the File on the application server, it says that it 'could not open file'.
Any suggestions will be apprecaited to open the file and transfer the data from
Final Internal table to --> Application server
Below is my code....If found any mistakes then plz correct me...
*&      Form UPLOAD_APPLSERVER
*       text
* --> p1        text
* <-- p2        text
FORM UPLOAD_APPLSERVER .
DATA : GV_OUTPUT(275) TYPE C.
DATA : P_FILE TYPE STRING.
P_FILE = 'DR1/interfaces/Esker/ORDHIST'.
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC <> 0.
    MESSAGE : I002(ZMSSG) WITH 'Could not open file'.
    STOP.
ENDIF.
LOOP AT T_FINAL1 INTO WA_FINAL1.
CONCATENATE WA_FINAL1-VBUND
              WA_FINAL1-BSTNK
              WA_FINAL1-KUNNR
              WA_FINAL1-AUDAT
              INTO GV_OUTPUT
              SEPARATED BY ','.
TRANSFER GV_OUTPUT TO P_FILE.
IF SY-SUBRC <> 0 .
     MESSAGE : I003(ZMSSG) WITH 'Trasnfer is failed'.
     STOP.
ENDIF.
ENDLOOP.
CLOSE DATASET P_FILE.
ENDFORM.                    " UPLOAD_APPLSERVER
Thanks & Regards,
Krishna

Hello Kittu,
What was the Sy-Subrc value after executing the Open Dataset statement?
If it is 8, then the problem could be with
1) The path name not mentioned properly (or)
2) User Id might not be having access to the file mentioned in the path
Also, if you are using the App Server as UNIX then the filenames should be of case sensitive.
Check the path first and note it down as per the actual case
Hope this is helpful
Thanks,
Babu Kilari
Edited by: Babu Kilari on Apr 6, 2009 6:18 AM

Similar Messages

Unable to create a file in Application Server using OPEN DATASET stattement.

I am unable to create a file in Application Server using the following statement.
OPEN DATASET filename FOR OUTPUT
IN TEXT MODE ENCODING DEFAULT
MESSAGE msg.
The message I'm getting is "Permission Denied". I have checked authorisation using SU53 which says "The last authorization check was successful". Please help.

You can use following code to capture the error.
TRY.
      OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
      CATCH CX_ROOT
      INTO EXCEPTION.
      CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
        RECEIVING
        RESULT = V_MSG.
      MESSAGE v_msg
      TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES   Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful.

Could not open the file in application server

Hi All,
I have a Zreport which will write files on application server. When I tried to download it is showing me "Could not open the file". And when checked again with /nal11 the files does not exist. When I ran the Zreport again the file exist in application server but unable to download. And when checked again the file doesnot exist. Why it is getting archived? Please help me.
Thanks,
Venkata

Hi Sagar,
Below is my file path : /dv2/tmp/instl/salesdata.txt
When I checked in the below path the file exists.
/dv2/tmp/archive/salesdata.txt
Solved the issue.
Thanks,
Venkata

Unable to delete a file on application server

Hello Experts,
I have gone through couple of post and sample nothing worked that's the reason Iam posting a query here.
Please help me with your valuable suggestions.
I am reading a file from the application server running a BDC program to update my ztable all works fine.
now i wanted to move this file to another folder thats too working perfectly but now when i try deleting the older one it is not getting deleted.
I have closed the dataset and checked the authorization that is not a concern but still it is not getting deleted.
I have pasted the code below.
For READ and CLOSE dataset it returns subrc as 0 but after delete it returns 4.
data : mess type string.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT message mess.
IF SY-SUBRC = 0.
DO.
    READ DATASET ld_file INTO wa_string.
    if sy-subrc eq 0.
        append wa_string to it_string.
        clear wa_string.
    else.
        exit.
    endif.
enddo.
close dataset ld_file.
delete dataset ld_file.
else.
WRITE 'Unable to open source file to move the content'.
endif.
Regards,
Ranjith N

Hello Mr Ghode,
Thaking you for your response on my query.
as you said to handle exception this is what i have done.
kindly verify the same would be of great help.
still iam unable to delete the file.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC = 0.
    DO.
      READ DATASET ld_file INTO wa_string.        "LV_LINE is variable to hold line contents being read
      if sy-subrc eq 0.
        append wa_string to it_string.
        clear wa_string.
      else.
        exit.
      endif.
enddo.
close dataset ld_file.
if sy-subrc eq 0.
try.
    delete dataset ld_file.
    catch CX_dynamic_check into t_ref.
    err_txt = t_ref->get_longtext( ).
endtry.
endif.
endif.
Regards,
Ranjith N

Open documents/files from Application Server in forms 6i

Hello All,
Our requirement is to open files that are in Application server( We do not want to upload them into database).
Is there a way to open this files from forms 6i.
I am wondering how the "View Output" or View log button works on the concurrent program submission form. Its the doing the same thing i.e pulling the file from Application server and showing up.
Please let me know if anyone has any ideas on how to get this done.
Thanks
Sunil

I assume you are using Forms 6i in web mode here. Then it is just a URL to the file if you properly map to a directory where you store the files:
web.show_document('http://...../myfile.pdf');
But it also looks like you are using Oracle Apps, so might want to ask it in the e-Business Suite.

Unable to open leopard files on windows server

Hi,
We had a mac which was on Leopard and saved files to the server
The file system we use is a Windows 2008 File Server, this has worked fine with leopard for years
However I understand that Leopard splits the files into resource forks - and that Lion has dropped support for these files.
That particular mac is now on Lion as we upgraded and encountering LOTS of issues
I unable to open or edit lots of the files as i believe chunks of the files are missing.
E.g an .eps file showed as 740KB on leopard - Viewing from a windows PC it was 730kb for the .eps and 10kb for the ._ resource fork.
Now that we are on the LION upgrade, we only see the .eps file and it is only 730kb. Information missing is things such as preview (quark), Font data, type of file, version number
Is there anyways to fix this? we have hundreds! of images, files etc created with leopard and now upgraded to lion they all have become useless!
Rejoining the resource forks and files together so that they are usable on lion
Thanks

You also may want to post this in the Lion forum, someone there may have some insight.

How to Open a file in Application Server

Hi All,
I am having a recquirement that I had to read the data from an Application Server file, I want to know whether any function modules are there to open a file that is in the Application server.
Thankx In advance,
Sri.

Hi,
If you are on windows, the solution is to create a shared directory anf give access rights to your sapservice <SID> user.
It's not really logical to put files on app servers because one app server can stopped without stopping the system.
So we decided to put all our shared directories on the Central Instance server.
Regards,
Olivier

Opening a file in Application Server

Hi Friends,
I have a file 'abc' in application server, and i don't know the extension of it . while trying to open it using OPEN DATASET   statement, it fails because of no extension.
I have tried using 'abc.*' in the open dataset   statement but it doesnt work....so is there any function module or is there any other way to open and read it.........

>
Shylaja t wrote:
> I have a file 'abc' in application server, and i don't know the extension of it . while trying to open it using OPEN DATASET   statement, it fails because of no extension.
Its totally wrong to say OPEN DATASET statement failed because of no extension of the file! Actually, the ABAP run-time does not care whether the file has an extension or not. In most cases, the app server (file system) datasets/files are stored without any extension.
Here's how to approach your issue:
1. Read the Keyword Documentation of OPEN DATASET
2. Check the Sy-Subrc after OPEN DATASET statement and if its unequal to 0;
        a. Check the file name/path you are passing is correct
        b. Check you are using OPEN DATASET for READ
        c. Depending you are in a Unicode/Non-Unicode system, check the file is not already open
        d. Make sure the file you are trying to open physically exists in the app server!
Once you are able to OPEN the file then use READ DATASET command to read it.
Hope this helps.
Cheers,
Sougata.

Unable to open excel file through application created by application builder

Hello,
I've created an application for my program using application builder, but the built application is not able to open the required excel file as it was being opened in original program.
Please help.

Please post your code. We cannot do anything to help you if you do not. There are too many things that could be wrong for us to try and guess what you are doing. Also please tell us which version of LV you are using and which version of the toolkit. This is important because there have been a lot of changes to the toolkits here in the last couple of years.
Joe.
"NOTHING IS EVER EASY"

How to download file from application server

Hi Experts,
              I developed report and execute in background mode. for this i used Open dataset transfer and close dataset . i got the requried output . But in this case user want downloaded file on presentation server so can anyone tell me How to download file from application server?
i know it is possible through Tcode CG3Y. but i want code in program.

This code will download a file to your Client package by package, so it will also work for huge files.
*& Report ZBI_DOWNLOAD_APPSERVER_FILE
REPORT zbi_download_appserver_file.
PARAMETERS: lv_as_fn TYPE sapb-sappfad
DEFAULT '/usr/sap/WBP/DVEBMGS00/work/ZBSPL_R01.CSV'.
PARAMETERS: lv_cl_fn TYPE string
DEFAULT 'C:\Users\atsvioli\Desktop\Budget Backups\ZBSPL_R01.CSV'.
START-OF-SELECTION.
CONSTANTS blocksize TYPE i VALUE 524287.
CONSTANTS packagesize TYPE i VALUE 8.
TYPES ty_datablock(blocksize) TYPE x.
DATA lv_fil TYPE epsf-epsfilnam.
DATA lv_dir TYPE epsf-epsdirnam.
DATA ls_data TYPE ty_datablock.
DATA lt_data TYPE STANDARD TABLE OF ty_datablock.
DATA lv_block_len TYPE i.
DATA lv_package_len TYPE i.
DATA lv_subrc TYPE sy-subrc.
DATA lv_msgv1 LIKE sy-msgv1.
DATA lv_processed_so_far TYPE p.
DATA lv_append TYPE c.
DATA lv_status TYPE string.
DATA lv_filesize TYPE p.
DATA lv_percent TYPE i.
"Determine size
SPLIT lv_as_fn AT '/' INTO lv_dir lv_fil.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
    EXPORTING
      file_name      = lv_fil
      dir_name       = lv_dir
    IMPORTING
      file_size_long = lv_filesize.
"Open the file on application server
OPEN DATASET lv_as_fn FOR INPUT IN BINARY MODE MESSAGE lv_msgv1.
IF sy-subrc <> 0.
    MESSAGE e048(cms) WITH lv_as_fn lv_msgv1 RAISING file_read_error.
    EXIT.
ENDIF.
lv_processed_so_far = 0.
DO.
    REFRESH lt_data.
    lv_package_len = 0.
    DO packagesize TIMES.
      CLEAR ls_data.
      CLEAR lv_block_len.
      READ DATASET lv_as_fn INTO ls_data MAXIMUM LENGTH blocksize LENGTH lv_block_len.
      lv_subrc = sy-subrc.
      IF lv_block_len > 0.
        lv_package_len = lv_package_len + lv_block_len.
        APPEND ls_data TO lt_data.
      ENDIF.
      "End of file
      IF lv_subrc <> 0.
        EXIT.
      ENDIF.
    ENDDO.
    IF lv_package_len > 0.
      "Put file to client
      IF lv_processed_so_far = 0.
        lv_append = ' '.
      ELSE.
        lv_append = 'X'.
      ENDIF.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize         = lv_package_len
          filename             = lv_cl_fn
          filetype             = 'BIN'
          append               = lv_append
          show_transfer_status = abap_false
        TABLES
          data_tab             = lt_data.
      lv_processed_so_far = lv_processed_so_far + lv_package_len.
      "Status display
      lv_percent = lv_processed_so_far * 100 / lv_filesize.
      lv_status = |{ lv_percent }% - { lv_processed_so_far } bytes downloaded of { lv_filesize }|.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING          "percentage = lv_percent - will make it fash
          text = lv_status.
    ENDIF.
    "End of file
    IF lv_subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
"Close the file on application server
CLOSE DATASET lv_as_fn.

I want to put header while stroing file in application server

Hi Guru,
   Can anybody tell how to put header while stroing file in application server.
in the below pgm data is coming i want to put heading .if we see in al11 transaction the header should come .plese give on eg in the code itself.its urgent
eg:
material number
100
200
declarations...................................................
tables: bkpf.                          " Accounting Document Header
*"Selection screen elements............................................
parameters:
p_burks like bkpf-bukrs.             " Company Code
select-options:
s_gjahr for bkpf-gjahr.              " Fiscal year
Type declaration of the structure to hold Accounting Document Header*
data:
begin of fs_bkpf,
    bukrs type bkpf-bukrs,             " Company Code
    belnr type bkpf-belnr,             " Accounting Document Number
    gjahr type bkpf-gjahr,             " Fiscal year
    blart type bkpf-blart,             "        Document type
    bldat type bkpf-bldat,             " Document date in document
end of fs_bkpf.
Internal table to hold Accounting Document Header                   *
data:
t_bkpf like standard table
           of fs_bkpf.
Type declaration of the structure to hold file data                 *
data:
begin of fs_table,
    str type string,
end of fs_table.
Internal table to hold file data                                    *
data:
t_table like standard table
            of fs_table.
field-symbols: <fs>.
*" Data declarations...................................................
Work variables                                                      *
data:
w_char(50)      type c,
w_file_name(50) type c value 'YH645_050103'.
select bukrs                           " Company Code
       belnr                           " Accounting Document Number
       gjahr                           " Fiscal year
       blart                           "        Document type
       bldat                           " Document date in document
from bkpf
into table t_bkpf
where bukrs eq p_burks
   and gjahr in s_gjahr.
if sy-subrc eq 0.
loop at t_bkpf into fs_bkpf.
    do.
      assign component sy-index of structure fs_bkpf to <fs>.
      if sy-subrc ne 0.
        exit.
      else.
        move <fs> to w_char.
        if sy-index eq 1.
          fs_table-str = <fs>.
        else.
          concatenate fs_table-str ',' w_char into fs_table-str.
        endif.                         " IF SY-INDEX...
      endif.                           " IF SY-SUBRC...
    enddo.                             " DO...
    append fs_table to t_table.
endloop.                             " LOOP AT T_KNA1...
endif.                                 " IF SY-SUBRC...
open dataset w_file_name for output in text mode encoding default.
loop at t_table into fs_table.
transfer fs_table-str to w_file_name.
endloop.                               " LOOP AT T_TABLE...

Hi,
may i know what kind of heading you want to display?
like date, filename, time etc
then modify the below code:
*&      Form send_statistic
     Create the status Report on application Server
   ---> pv_rlines - Total No of Records in Internal table          *
   ---> pv_slines - Total No of Successful records                 *
   ---> pv_elines - Total No of Errornous records                 *
   ---> pv_path    - File Path where the file to be created        *
   ---> pv_flag    - Flag to check for A/c group                    *
FORM sub_send_statistic USING pv_rlines TYPE int4
                               pv_slines TYPE int4
                               pv_elines TYPE int4
                               pv_path    TYPE salfile-longname
                               pv_name    TYPE rlgrap-filename
                               pv_flag    TYPE char1.
CLEAR : i_tab,
          wa_tab.
Convert date to MM/DD/YYYY format
PERFORM date_convert.
Convert Time to HH:MM:SS format
CONCATENATE sy-uzeit+0(2)
              c_colon
              sy-uzeit+2(2)
              c_colon
              sy-uzeit+4(2)
         INTO v_time1.
Build the Output File name
IF   p_sold = c_x
AND pv_flag = c_x.
    CONCATENATE c_objid
                c_us
                c_z001
                c_us
                sy-datum
                c_us
                sy-uzeit
           INTO v_file.
ENDIF. " IF   p_sold = c_x
IF p_cons = c_x.
    CONCATENATE c_objid
                c_us
                c_z008
                c_us
                sy-datum
                c_us
                sy-uzeit
           INTO v_file.
ELSEIF p_sold = c_x
AND    pv_flag <> c_x.
    CONCATENATE c_objid
                c_us
                sy-datum
                c_us
                sy-uzeit
           INTO v_file.
ENDIF. " IF p_cons = c_x
Build the Complete Output File Path
CONCATENATE pv_path
              c_slash
              v_file
         INTO v_outfile.
Populate the data required for output into an internal table and
then transfer the table contents to file on application server
DATA UPLOAD STATISTICS
wa_tab-rec = text-001.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
TITLE
IF   p_sold = c_x
AND pv_flag <> c_x.
    sy-title = text-t17.
ENDIF. " IF   p_sold = c_x
IF p_sold = c_x
AND pv_flag = c_x.
    sy-title = text-t16.
ENDIF. " IF p_sold = c_x
IF p_cons = c_x
AND pv_flag = c_x.
    sy-title = text-t19.
ENDIF. " IF p_cons = c_x
wa_tab-rec+0(7)   = text-002.
wa_tab-rec+7(60) = sy-title.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
Date & Time
wa_tab-rec+0(5)   = text-012.
CONDENSE v_date NO-GAPS.
wa_tab-rec+6(10) = v_date.
wa_tab-rec+60(10) = text-003.
wa_tab-rec+70(15) = v_time1.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
Folder Name
wa_tab-rec+0(18) = text-005.
wa_tab-rec+19(72) = pv_path.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
File Name
wa_tab-rec+0(18) = text-006.
---Begin of addition -Shivakumar - 09-05-2007--
wa_tab-rec+19(72) = pv_name.
---Begin of addition -Shivakumar - 09-05-2007--
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
Records Read
CLEAR v_count.
v_data   = pv_rlines.
v_count = STRLEN( v_data ).
CONDENSE v_data NO-GAPS.
wa_tab-rec+0(46) = text-007.
wa_tab-rec+47(4) = v_data.
APPEND wa_tab TO i_tab.
CLEAR : wa_tab,
          v_data.
Successfull Records
CLEAR v_count.
v_data   = pv_slines.
v_count = STRLEN( v_data ).
CONDENSE v_data NO-GAPS.
wa_tab-rec+0(46) = text-008.
wa_tab-rec+47(4) = v_data.
APPEND wa_tab TO i_tab.
CLEAR : wa_tab,
        v_data.
Error Records
CLEAR v_count.
v_data   = pv_elines.
v_count = STRLEN( v_data ).
CONDENSE v_data NO-GAPS.
wa_tab-rec+0(46) = text-009.
wa_tab-rec+47(4) = v_data.
APPEND wa_tab TO i_tab.
CLEAR : wa_tab,
          v_data.
v_mesg = text-t04.
IF   p_sold = c_x
AND pv_flag <> c_x.
    MOVE i_tab TO i_file.
ENDIF. " IF   p_sold = c_x
IF p_sold = c_x
AND pv_flag = c_x.
    MOVE i_tab TO i_file1.
ENDIF. " IF p_sold = c_x
IF NOT i_tab IS INITIAL.
Open the file on Application server to write the report
    OPEN DATASET v_outfile
             FOR OUTPUT IN TEXT MODE
        ENCODING DEFAULT MESSAGE v_mesg.
    IF sy-subrc <> 0.
      MESSAGE e000(zconversions) WITH v_mesg.
    ELSE. " IF sy-subrc <> 0
Transfer details to the file on application server
      CLEAR wa_tab.
      LOOP AT i_tab INTO wa_tab.
        TRANSFER wa_tab-rec TO v_outfile.
        CLEAR wa_tab.
      ENDLOOP. " LOOP AT i_tab INTO wa_tab
Close the file
      CLOSE DATASET v_outfile.
    ENDIF. " IF sy-subrc <> 0
ENDIF. " IF NOT i_tab IS INITIAL
ENDFORM.                    " Create_Report

Unable to Open File In Application Server

Hi All,
I have generated csv file in application Server with the help of Open HUb Destination.In Open Hub 2 files will we generated(1 is structure of the file(s_ztest),2 is data file(ztest)).When i click on the structure of the file then it is opening,but when im tryin to open data file(i,e(ztest)its giving an message like UNABLE TO OPEN THE FILE.
Please let me know how it can be opened.
Thanks In Advance,
Bobby

Hi All,
File is Opening,it was an error in filed mapping....

Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory

Dear Experts,
Please note that I am facing a chllenge while confiuguring the VNCServer on the local test Server. The Local Test Sver OS Version is Redhat Enterprise Linux Server
Release 5.5 32-bit. Please review the following error message and advise me on how to fix the vncserver issue.
[root@test .vnc]# cat xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
gnome-session &
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
[root@test .vnc]# cat /etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
# Uncomment the lines below to start a VNC server on display :2
# as my 'myusername' (adjust this to your own). You will also
# need to set a VNC password; run 'man vncpasswd' to see how
# to do that.
# DO NOT RUN THIS SERVICE if your local area network is
# untrusted! For a secure way of using VNC, see
# <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
# Use "-nohttpd" to prevent web-based VNC clients connecting.
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.
# VNCSERVERS="2:myusername"
# VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
VNCSERVERS="1:oracle"
[root@test .vnc]# ls
passwd test.oracle.co.zm:1.pid test.oracle.co.zm:3.log test.oracle.co.zm:5.pid test.oracle.co.zm:6.pid
test.oracle.co.zm:1.log test.oracle.co.zm:2.log test.oracle.co.zm:5.log test.oracle.co.zm:6.log xstartup
[root@test .vnc]# more test.oracle.co.zm:1.log
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Mar 11 11:18:37 2014
vncext:      VNC extension running!
vncext:      Listening for VNC connections on port 5901
vncext:      Listening for HTTP connections on port 5801
vncext:      created VNC server for screen 0
Could not init font path element unix/:7100, removing from list!
localuser:root being added to access control list
No profile for user 'root' found
SESSION_MANAGER=local/test.oracle.co.zm:/tmp/.ICE-unix/13603
Window manager warning: Log level 32: could not find XKB extension.
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (nm-applet:13697): WARNING **: No connections defined
Initializing nautilus-open-terminal extension
Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-writer.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-calc.desktop for panel launcher: No such file or directory
[root@test .vnc]#
Regards
Mohammed Abdul Muqeet

Hi,
Try these 3 solutions
1. Did you start vncserver services as:
service vncserver start
2.Check that port 5901 has not been blocked by a firewall:
# nc -vz localhost 5901
You should get a connection and a termination. If you get an error, fix the firewall.
3. service iptables stop
Hope This Helps
Regards,
-DK

Problem opening file in application server received by FTP.

Hi,
I am using FTP_COPY to receive file in application server.
I am receiving file from FTP but I am unable to open them because the mode was set as 640 as in attributes.
Could you please help me in how to receive in readable format...
Any suggestions to use FTP commands?
Thanks in advance.

If you do not have authorizations to open the file its easy: there is nothing you can do except contact the ftp admin.

InfoSpoke fails with message "Could not open file on application server"

BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.

Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help.

Unable to open a file in Application server

Similar Messages

Maybe you are looking for