Unable to open side panel in DMS

Unable to open side panel in DIR Error: "Error on Page" and I am using IE8 for NWBC.

Is IE 8 even supported for the scenario? It is really old...
espen

Similar Messages

Help! Can't open side panel of power mac G4! I need in there!

Hi, I just bought a powermac G4 for my retired parents and they need to hit the reset button but can't open the side panel to get in. They have tried moving the lockable cover latch and pulling the side handle but it seems to be jammed. Any suggestions. They live 400 miles away in Scotland so I can't try anything myself. Heellllppp!
Any assistance most appreciated,
Max

Well, no one else has replied, so I'll make a suggestion.
Place the left side of the G4 on the floor. Now push down quite hard on the top (right side) panel near the pull-up lever with one hand while pulling up on the lever. Hopefully the side panel will release.
 Cheers, Tom

Content server - unable to open file

Hi,
For Linux based Content server 6.4 installation we are experiencing the errror as unable to open, display the saved DMS original fiiles.
The CS server URL test, RSCMST tests are all green.
The DMS authorizations are correct. We are able to save DMS files on content server. Only while in display mode CV03N it is showing error as unable to open file. We have checked DMS settings which are ok.
Request you to let us know where to trace the error.
Thanks.
Anirudh,

Hi,
The error is
Component New Microsoft Office Word Document 111.doc error text - No Such flie or directory
Repository Z_DMS_X cannot be addressed from the front end.
The CS is installed on Apache server, the users are on windows. The AdminSecurity is set to 0.
BR,
Anirudh,

Bookmarks in side panel closed unable to re-open

somehow my bookmarks in the side panel disappeared. There are absolutely no options to re-acquire them.

Hi Gallienus,
Try hitting ''CTRL + B''. This will display your bookmarks in the sidebar temporarily. If you want to permanently put your bookmarks in the sidebar, you should take a look at [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars this article on customizing the toolbar]. It will show you how you can add new toolbar buttons. There is a bookmark icon available that will open your bookmarks in the sidebar. It looks similar to the other bookmark icon, but it has as small bar on the left side.
Hopefully this helps!

My other shared computers in my network don't show up the side panel when saving or opening in Illustrator after upgrading to OS X 10.10

When trying to save a file to the computer I use for printing, the entire "Shared" section does NOT show up on my side panel. If I open up a Finder window, they are there and I have no issues accessing them. I just can't get them to appear to select them inside of Illustrator.

Understood, but that's not the issue here, the "shared" section disappears from open/save dialog boxes within the Adobe applications.
I've been testing this with Mavericks and so far have been unable to reproduce the issue, I think this is a Yosemite exclusive issue.
61446 - I'll let you know the final results of our testing, but it looks like downgrading to Mavericks may be the solution here.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory

Dear Experts,
Please note that I am facing a chllenge while confiuguring the VNCServer on the local test Server. The Local Test Sver OS Version is Redhat Enterprise Linux Server
Release 5.5 32-bit. Please review the following error message and advise me on how to fix the vncserver issue.
[root@test .vnc]# cat xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
gnome-session &
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
[root@test .vnc]# cat /etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
# Uncomment the lines below to start a VNC server on display :2
# as my 'myusername' (adjust this to your own). You will also
# need to set a VNC password; run 'man vncpasswd' to see how
# to do that.
# DO NOT RUN THIS SERVICE if your local area network is
# untrusted! For a secure way of using VNC, see
# <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
# Use "-nohttpd" to prevent web-based VNC clients connecting.
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.
# VNCSERVERS="2:myusername"
# VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
VNCSERVERS="1:oracle"
[root@test .vnc]# ls
passwd test.oracle.co.zm:1.pid test.oracle.co.zm:3.log test.oracle.co.zm:5.pid test.oracle.co.zm:6.pid
test.oracle.co.zm:1.log test.oracle.co.zm:2.log test.oracle.co.zm:5.log test.oracle.co.zm:6.log xstartup
[root@test .vnc]# more test.oracle.co.zm:1.log
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Mar 11 11:18:37 2014
vncext:      VNC extension running!
vncext:      Listening for VNC connections on port 5901
vncext:      Listening for HTTP connections on port 5801
vncext:      created VNC server for screen 0
Could not init font path element unix/:7100, removing from list!
localuser:root being added to access control list
No profile for user 'root' found
SESSION_MANAGER=local/test.oracle.co.zm:/tmp/.ICE-unix/13603
Window manager warning: Log level 32: could not find XKB extension.
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (nm-applet:13697): WARNING **: No connections defined
Initializing nautilus-open-terminal extension
Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-writer.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-calc.desktop for panel launcher: No such file or directory
[root@test .vnc]#
Regards
Mohammed Abdul Muqeet

Hi,
Try these 3 solutions
1. Did you start vncserver services as:
service vncserver start
2.Check that port 5901 has not been blocked by a firewall:
# nc -vz localhost 5901
You should get a connection and a termination. If you get an error, fix the firewall.
3. service iptables stop
Hope This Helps
Regards,
-DK

??? I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software. When I open it I get: "An error occurred when attempting to change modules". It won't import photos and has no side panels under Library. What should I do?

I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software. When I open it I get: "An error occurred when attempting to change modules". It won't import photos and has no side panels under Library. What should I do?

I Nearly bought from Amazon too but I found a thread from Adobe stating that the only recognized outlet for lightoom is themselves and other outlets serial numbers will not be guaranteed.
THat at was sufficient for me to buy direct from Adobe, hope you get it sorted.

Unable to open a new library panel

For some reason I am not able to close library panels I've
opened. I close
them all and I still get the message "Unable to open a new
library panel. The
limit of ten open library panels has been reached." I close
the panels and
still I am not able to open a new library panel. I close the
MAIN library
panel and then reopen it and all the previous extra library
panels open. Am I
missing something in the closing of the Library panels? INtel
iMac, OSX
10.5.4, Flash CS4.

I have this problem too on Windows Vista.
Any solution?

Stupidest problem ever - side panel latch won't open!

has anyone had this problem?
the other day, I installed some new RAM and had no problem opening the side panel.
today, I want to put in some new hard drives - and the side panel latch just doesn't open!
I have no idea what could be causing this - it's just not opening. what could be inside that's preventing the latch from opening?
help!
w

W,
There are 4 latches located just above the hard drive bays and they fit into a channel located on the side panel. You may have installed the side panel on a very slight angle by not centering the bottom lip in in its matching slot, causing the latches to bind. The other explanation is the channel has loosened on the side panel.
I would lay the Mac on its side and slightly press on the side panel while opening the latch. If that doesn't work, you can attempt to shift the side panel in its slot. This can be done using a piece of wood and a hammer. Be careful though, you don't want to damage the Mac Pro's exterior or cause any internal damage.
Keith
Message was edited by: Keith Parobek

Unable to open Dreamweaver using OS X 10.9.2

I recently updated to Maverick OS 10.9.2 and am now unable to open Dreamweaver CS5 11.0--an error message appears saying that Dreamweaver closed unexpectedly. I've also tried installing Dreamweaver updates but I'm not able to.

Please try to clean your DW CS5 preferences by following the steps mentioned below:
Open “Finder” and press CMD+SHIFT+G to open the “Go to the folder” dialog
Type ‘~/Library’ (without the quotes; note the ~ sign before /Library) and click “Go”
Navigate to “Application Support/Adobe/”
Locate the folder named “Dreamweaver CS5” and make a backup of this folder (this will be needed to restore vital preferences later)
Rename/Delete the folder “Dreamweaver CS5” (again without the quotes)
Create a new folder named “Dreamweaver CS5” (again without the quotes)
Create a new folder named “ab_XY” (without the quotes; for example: en_US; you can get this in your backup folder! where ab_XY is the locale in which Dreamweaver was installed)
Navigate inside the folder “ab_XY” and create a new folder named “Configuration” (without the quotes)
Navigate inside the folder “Configuration”
From the backup folder, copy the following folders (if available/present on your system) and paste them inside the “Configuration” folder (please the attached screen shot “Restore_Selected_Preferences_CS5_Mac.png” for reference):
CodeCollapse
CodeColoring
CodeHints
DocumentTypes
DVADialogPrefs
Snippets
Workspace
Open “Finder” and press CMD+SHIFT+G to open the “Go to the folder” dialog
Type ‘~/Library’ (without the quotes; note the ~ sign before /Library) and click “Go”
Navigate to “Preferences/” folder
Locate the file “Adobe Dreamweaver CS5 Prefs” and rename/delete the file
Now try to launch Dreamweaver again and see if you still face the issue.
Please Note: After you have launched Dreamweaver, please ensure that you DO NOT launch “Adobe BrowserLab” panel. Please create a new workspace by following the steps mentioned below, according to your liking but please refrain from using “Adobe BrowserLab” panel as this is known to cause a crash in Dreamweaver on Mac 10.9.
Steps to create a workspace (without “Adobe Browser Lab”):
Launch Dreamweaver
Locate “Adobe BrowserLab” (but don’t open it) and click the top-right-hand-side corner of the panel and select the option “Close Tab Group”
Now, arrange the remaining panels in your workspace as per your liking
Go to menu “Window -> Workspace Layout -> New Workspace…”
In the “New Workspace” dialog, provide a name of your choice and click “OK” button
Also, you may like to visit this page: http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html for a known issue of Dreamweaver not launching after upgrading to Mac 10.9 (Mavericks).
If the issue still persists even after cleaning your Dreamweaver CS5 preferences, please let us know. We would like to have a connect session with you to resolve your query at the earliest.
Also, let me take this opportunity to propose and introduce the latest Dreamweaver CC to you. Dreamweaver CC provides you the potential and ability to do much more and gives you the cutting edge in your business. You may like to take a look at its features at http://www.adobe.com/products/dreamweaver/features.html. I’m sure you’ll find more than what you have been looking for and you’ll love them.
Here's how you can buy Dreamweaver CC:
Visit the link http://www.adobe.com/products/dreamweaver.html
Towards the bottom-right-hand side, locate “Adobe Dreamweaver CC” and click “Join” (please see attached screen shot “Where_To_Buy_Dreamweaver_CC.jpg” for reference)
Select “Month-to-month” OR “One-year” for “Plan”
Click the “Add to Cart” button
Follow the easy and descriptive step-by-step “Checkout” instructions
Please let us know. We are eager to help you.
Thanks,
Lalita

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Unable to open 11g R2 database now after trying an RMAN restore

Hi my database is not opening now.
What I was trying was to restore the database on my new server from latest database taken from my old live server and applying it on my new 11g DB (new server-database already created)
old server-11.1.0.7.0-windows 2003 server 32 bit
new server-11.2.0.3.0-windows 2008 64 bit server
The steps i have done which caused this , (After everything was working fine, i did these foll.steps and now all messed up):
The oracle database on this new server was already 11.2.3.0 -it was not upgrade, i directly installed 11.2.0.3.0 on it + applied latest patches etc.
I took RMAN backup from old server 11.1.0.7.0 oracle database.
Copied this backup to to the new server flash recovery area &every step of the restore was working fine -
in nomount mode, restored the control file from autobackup-fine
in mount mode, catalogued the files-fine (Backup from old live,copied to new live)
I restored&Recovered the database until the latest archivelogs.
Until the above steps-all worked fine like a normal recovery steps.
Then I gave "alter database open resetlogs" in RMAN prompt, it gave out error and from that point onwards I am unable to open the database now.
Unfortunately, couldnt grab full screenshot of the error in RMAN but the error basically said that bootstrap failed and i have to open the database with the upgrade option?
Please see in alert log as well
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Following is the last lines from alert log:
[code]
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Windows NT Version V6.1 Service Pack 1
CPU                 : 4 - type 8664, 4 Physical Cores
Process Affinity    : 0x0x0000000000000000
Memory (Avail/Total): Ph:3760M/8191M, Ph+PgF:9170M/16381M
VM name             : VMWare Version (6)
Using parameter settings in server-side spfile F:\APP\ORACLE\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEGEOP.ORA
System parameters with non-default values:
processes                = 150
memory_target            = 3728M
control_files            = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL01.CTL"
control_files            = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL02.CTL"
control_files            = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL03.CTL"
db_block_size            = 8192
compatible               = "11.2.0.0.0"
log_archive_format       = "ARC%S_%R.%T"
db_recovery_file_dest    = "I:\oracle\flash_recovery_area"
db_recovery_file_dest_size= 45G
undo_tablespace          = "UNDOTBS1"
sec_case_sensitive_logon = FALSE
remote_login_passwordfile= "EXCLUSIVE"
db_domain                = ""
dispatchers              = "(PROTOCOL=TCP) (SERVICE=GEOPXDB)"
audit_file_dest          = "F:\APP\ORACLE\ADMIN\GEOP\ADUMP"
audit_trail              = "DB"
db_name                  = "GEOP"
open_cursors             = 300
diagnostic_dest          = "F:\APP\ORACLE"
Thu Dec 12 17:22:18 2013
PMON started with pid=2, OS id=3440
Thu Dec 12 17:22:18 2013
PSP0 started with pid=3, OS id=10252
Thu Dec 12 17:22:19 2013
VKTM started with pid=4, OS id=11684 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Thu Dec 12 17:22:19 2013
GEN0 started with pid=5, OS id=4528
Thu Dec 12 17:22:19 2013
DIAG started with pid=6, OS id=5652
Thu Dec 12 17:22:19 2013
DBRM started with pid=7, OS id=7676
Thu Dec 12 17:22:19 2013
DIA0 started with pid=8, OS id=5724
Thu Dec 12 17:22:19 2013
MMAN started with pid=9, OS id=6632
Thu Dec 12 17:22:19 2013
DBW0 started with pid=10, OS id=3572
Thu Dec 12 17:22:19 2013
LGWR started with pid=11, OS id=8876
Thu Dec 12 17:22:19 2013
CKPT started with pid=12, OS id=3748
Thu Dec 12 17:22:20 2013
SMON started with pid=13, OS id=8108
Thu Dec 12 17:22:20 2013
RECO started with pid=14, OS id=1932
Thu Dec 12 17:22:20 2013
MMON started with pid=15, OS id=7468
Thu Dec 12 17:22:20 2013
MMNL started with pid=16, OS id=8136
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = F:\app\oracle
Thu Dec 12 17:22:21 2013
ALTER DATABASE   MOUNT
Successful mount of redo thread 1, with mount id 3351347149
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE   MOUNT
Thu Dec 12 17:22:26 2013
ALTER DATABASE OPEN
Beginning crash recovery of 1 threads
parallel recovery started with 3 processes
Started redo scan
Completed redo scan
read 11 KB redo, 6 data blocks need recovery
Started redo application at
Thread 1: logseq 3, block 2, scn 59089613795
Recovery of Online Redo Log: Thread 1 Group 6 Seq 3 Reading mem 0
Mem# 0: F:\ORACLE11G\ORADATA\GEOP\GEOP\REDO06.LOG
Completed redo application of 0.01MB
Completed crash recovery at
Thread 1: logseq 3, block 24, scn 59089633817
6 data blocks read, 6 data blocks written, 11 redo k-bytes read
Read of datafile 'F:\ORACLE11G\ORADATA\GEOP\GEOP\TEMP01.DBF' (fno 201) header failed with ORA-01203
Rereading datafile 201 header failed with ORA-01203
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_dbw0_3572.trc:
ORA-01186: file 201 failed verification tests
ORA-01122: database file 201 failed verification check
ORA-01110: data file 201: 'F:\ORACLE11G\ORADATA\GEOP\GEOP\TEMP01.DBF'
ORA-01203: wrong incarnation of this file - wrong creation SCN
File 201 not verified due to error ORA-01122
LGWR: STARTING ARCH PROCESSES
Thu Dec 12 17:22:27 2013
ARC0 started with pid=19, OS id=10876
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Thu Dec 12 17:22:28 2013
ARC1 started with pid=24, OS id=10912
Thu Dec 12 17:22:28 2013
ARC2 started with pid=25, OS id=6652
Thu Dec 12 17:22:28 2013
ARC3 started with pid=26, OS id=9648
ARC1: Archival started
ARC2: Archival started
ARC1: Becoming the 'no FAL' ARCH
Thread 1 advanced to log sequence 4 (thread open)
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 4
Current log# 4 seq# 4 mem# 0: F:\ORACLE11G\ORADATA\GEOP\GEOP\REDO04.LOG
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
Archived Log entry 64945 added for thread 1 sequence 3 ID 0xc7c27920 dest 1:
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_ora_12260.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_ora_12260.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Error 704 happened during db open, shutting down database
USER (ospid: 12260): terminating the instance due to error 704
Instance terminated by USER, pid = 12260
ORA-1092 signalled during: ALTER DATABASE OPEN...
opiodr aborting process unknown ospid (12260) as a result of ORA-1092
Thu Dec 12 17:22:33 2013
ORA-1092 : opitsk aborting process
[/code]
Please please please let me know what steps should I do now to get my 11g database operational again?
Now when i am trying:
(SQL prompt)
[code]
>sqlplus "/ as sysdba"
SQL*Plus: Release 11.2.0.3.0 Production on Thu Dec 12 17:22:05 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup open;
ORACLE instance started.
Total System Global Area 3891630080 bytes
Fixed Size                  2261120 bytes
Variable Size            2147487616 bytes
Database Buffers         1728053248 bytes
Redo Buffers               13828096 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 12260
Session ID: 5 Serial number: 5
SQL> startup open upgrade;
SP2-0714: invalid combination of STARTUP options
SQL> startup upgrade;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup upgrade open;
SP2-0714: invalid combination of STARTUP options
SQL> alter database mount;
ERROR:
ORA-03114: not connected to ORACLE
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
[/code]

This is why you do backups both before and after doing other things.
So one way to do something like this:
Backup old db.
expdp old db.
Install new 11gR2, create database.
Back it up.
Turn off archivelog.
impdp
Turn on archivelog.
Back it up.
The general thought here is you would start over with the first new db backup if the imp didn't work, you turn off archiving to avoid generating lots of redo that would be for a recovery you would never do.
There is more than one way to do it (TIMTOWTDI), best way depends on details, including volume of data and platform changes. expdp/impdp has an over the network option if disk space is limited and network is fast.
I usually allow for several tries when going to a new box, since the new box will require testing anyways.

Load error code 3 unable to load front panel

Hi all,
Wrote a vi in 8.6 and saved it for 8.5 for collaborators. When they run it up pops the error code 3 unable to load front panel. Memory full. see attached picture.
Has anyone any suggestions as to how to fix this?
Regards,
leeser
Attachments:
labview error code 3.png ‏51 KB

Hi guys,
Thanks for the comments,
Attached is the code (zipped). Excuse the bulkiness of the block diagrams. It basically controls a rotation stage and makes an avi at specific times/angles. The motor stage is ActiveX controlled.
As I don't have access to the hardware I am writing semi-blind. However, when I did visit them and had a quick look at the code I could get it to work by quickly including the subvis into a new main vi and obviously compiling it in 8.5. (may be onto something here!)
Different versions of the labVIEW -> doing a group a favour; I have v8.6 they have v8.5, wrote it in v8.6 saved it for v8.5. I don't have v 8.5. I also have v 8.2.1 on a different machine. Saved it for v8.2.1 and it opened no problem in 8.2.1. Will send this version on and see how they get on. More likely to be forward compatible???
I agree that the optimal situation is 1) use the same version of labview and/or
2) they get someone to do their coding on-site!!!!
I think the corrupt front panel object could be true given that I could get it to work when the subvis were included in a new main vi on-site.
so versions 8.6, 8.5 and 8.2 attached.....
regards,
Leeser
Attachments:
rotation_control.zip ‏178 KB
rotation_control_v8.6.zip ‏60 KB
NCLA_rot_usb_v8.5 Folder.zip ‏141 KB

Unable to open side panel in DMS

Similar Messages

Maybe you are looking for