Unable to open the requested node - error message

I get this error message when trying to connect WGM to my open directory system. This is on Server 2 and I have it set up as a"server connected to an open directory system"
" The node /LDAPv3/10.1.2.1 couldn’t be opened because an unexpected error of type -14002 occurred."
Also get this error message as well.
Error of type eDSOpenNodeFailed (-14002) on line 3809 of /SourceCache/ServerManagerApp/ServerManagerApp-230.2.51/PMMUGMainView.mm

You can get more verbose logging out of DirectoryService via:
sudo killall -USR1 DirectoryService
and look in the log
It's logged to /Library/Logs/DirectoryService/DirectoryService.debug.log
Be sure to run
sudo killall -USR1 DirectoryService
again to shut off the verbose logging.
For that errocode,
-14002 corresponds to: eDSOpenNodeFailed
ie : "Attempt to open a node failed."
So you can't connect to LDAP or it's not seen.
Verify ldap is even running (if not, all OD users should be complaining at this point)
via:
ps -ax | grep ldap
For where I got that error code info, see
http://developer.apple.com/documentation/Networking/Reference/OpenDirectoryRef/Reference/reference.html
You might try
lookupd -flushcache
although I'm not certain that alone will solve your issue here.
If not, you may need to follow the steps in the following article:
http://docs.info.apple.com/article.html?artnum=303197

Similar Messages

  • "Word was unable to open the data source" error message in mail merge

    I am trying to do a mail merge in Word 2008 for Mac and receive this message when I try to open the Excel file for the data.  Can someone please help?  I tried changing the filename to .xls (originally .xlsx) but it didn't work.

    As far as I know, you cannot merge from a  .xlsx data source in Mac Word 2008, and even though there is a KnowledgeBase article at  http://support.microsoft.com/kb/2604725 that suggests
    that all you have to do is "rename" to a .xls, I think what you actually have to do is open the .xlsx in Excel and use Save As to create a .xls.
    Generally speaking, you will be better off researching Mac Word questions in the relevant forum on Microsoft Answers, in this case here: http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword
    This particular issue was discussed in this conversation: http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword/cant-open-excel-file-for-mail-merge/90ccfd11-273f-4c2a-aa37-1d859b8e41e2?page=1
    If that does not help, and you cannot find anything else in the Answers group, I suggest that you post a new question in that group, referencing the above conversation and specifying your version of Mac OSX.
    Peter Jamieson

  • 'Could not find the requested node error' when guests join the meeting room

    I am working on a program where the owner would allow guests after they knock to enter the meeting room.  Upon acceptance, they would also be permitted to publish/subscribe audio.
    My ' meeting owner' application code is an adaptation of the Knocking Queue example. The 'owner app' code has the following settings in its creation complete.
    // Require that guests must knock.Note that this line changes the setting of your room so that in future anyone guest coming in
    // has to knock.
    cSession.roomManager.guestsHaveToKnock = true;
    //Enable autopromote
    cSession.roomManager.autoPromote =
    true;
    I get an error when the owner logins in first and accepts the guest into the meeting room.
       // Event handler function for displaying the selected Alert button.
                private function alertClickHandler(event:CloseEvent):void {
                 var queue:Array = pendingArray;
                 if ( cSession.userManager.myUserRole == UserRoles.OWNER ) {
          var item:Object = pendingArray.shift();
          trace (item["label"]);
          trace (item["descriptor"].userID);
                   if (event.detail==Alert.OK)
                    //Admit user for chatting
           cSession.roomManager.knockingQueue.acceptUser(item["descriptor"].userID);
           //Allow user to publish audio - supposed to be promoted through room setting
           //audioPub.setUserRole(item.descriptor.userID, UserRoles.PUBLISHER);
          else //if (event.detail==Alert.CANCEL)
           cSession.roomManager.knockingQueue.denyUser(item["descriptor"].userID);
    The 'client' application throws the following error.
    SWF] C:\Documents and Settings\a246216\My Documents\Flex Builder 3\Client Chat Tool\bin-debug\ClientChatTool.swf - 1,572,471 bytes after decompression
    AFCS Beta Build # : 0.92
    requestInfo http://connectnow.acrobat.com/fidelity2/ramr?guk=ZzprOg==&mode=xml&x=0.011843591462820768
    Getting FMS at https://na2.connectnow.acrobat.com/fms?ticket=1468amkp7k35g, attempt #1/3
    result: <fms>
      <origin>fms2.acrobat.com</origin>
      <proto_ports>rtmps:443</proto_ports>
      <retry_attempts>2</retry_attempts>
    </fms>
    #FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 protocols: [object ProtocolPortPair]
    #FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 [attempt 1 of 2] Connecting to 0/0: rtmps://fms2.acrobat.com/cocomo/na2-sdk-825d634c-46ed-4ed3-aa58-7450f0f7e36a/ramr #startProtosConnect#
    #FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 tempNetStatusHandler 0/1,NetConnection.Connect.Success
    #FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 isTunneling? false
    #FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 is using RTMPS? true
    RECEIVED LOGIN AT SESSION
      .user descriptor from server [object]
        .displayName [string]= k
        .userID [string]= GUEST-110858C2-4F16-4FE8-BF2C-D572F915FEC5
        .affiliation [number]= 5
        .role [number]= 5
    RECEIVENODES UserManager
    receiveAllSynchData UserManager
    checkManagerSync:[object UserManager]
    RECEIVENODES FileManager
    receiveAllSynchData FileManager
    checkManagerSync:[object FileManager]
    RECEIVENODES AVManager
    receiveAllSynchData AVManager
    checkManagerSync:[object StreamManager]
    RECEIVENODES RoomManager
    receiveAllSynchData RoomManager
    checkManagerSync:[object RoomManager]
    RECEIVENODES Chat
    receiveAllSynchData Chat
    Error: Could not find the requested node.
    at com.adobe.rtc.sharedModel::CollectionNode/getNodeConfiguration()[C:\work\main\connect\coc omoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:394]
    at com.adobe.rtc.sharedManagers::StreamManager/getNodeConfiguration()[C:\work\main\connect\c ocomoPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:577]
    at com.adobe.rtc.collaboration::AudioPublisher/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\collaboration\AudioPublisher.as:1009]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at com.adobe.rtc.sharedManagers::StreamManager/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1410]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveCascadingUserRole()[C: \work\main\connect\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:813]
    at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveUserRole()[C:\work\mai n\connect\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:715]
    at com.adobe.rtc.session.managers::SessionManagerBase/receiveUserRole()[C:\work\main\connect \cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
    The above error is thrown just when the 'guest' is accepted into the meeting room.  The guest has not published anything at this point.
    The chat part is working fine.
    I have tried different ways to resolve this issue but I am not getting anywhere.  I have tried different things.  Your help is appreciated.
    Ram

    It is win 7 64 bit system and same error on Illustrator x86 and x64.

  • How do fix this--FastCGI Error The FastCGI Handler was unable to process the request. Error Details: The FastCGI process has failed frequently recently. Try the request again in a while Error Number: -2147467259 (0x80004005).

    That's it! But at the bottom of the web page it says - ----------------
    -----javascriptvoid(0);

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • After rebooting ML server, unable to open active directory.  Error msg is Unable to open requested node error -14006.

    This active directory is a replica of master on 2nd Mac Mini server which still thinks replica is there (perhaps it is) and will not let us delete in order to recreate.  Both servers are running 10.8.4.  Nothing changed on either server, simply did a reboot.  When we logged in, Active Directory was turned off and when trying to turn on or access received message "Unable to open the requested node.  The node LDAPV3/127.0.0.1 could not be opened because of an unexpected error -14006".
    Does any one have experience with this and how can we recover?  Thanks in advance for your help.

    Hi again,
    I've been able to run Reports by changing the "Reports_Tmp" key in the Registry under:
    Hkey_local_machine\software\oracle\home0\
    to the D:\ drive

  • Unable to debug the Data Template Error in the Log file

    Hi,
    I am unable to debug the log file error message Please can anybody explain me in detail where the error lies and how to solve the error.The log file shows the following message.
    XDO Data Engine ver 1.0
    Resp: 50554
    Org ID : 204
    Request ID: 2865643
    All Parameters: USER_ID=1318:REPORT_TYPE=Report Only:P_SET_OF_BOOKS_ID=1:TRNS_STATUS=Posted:P_APPROVED=Not Approved:PERIOD=Sep-05
    Data Template Code: ILDVAPDN
    Data Template Application Short Name: CLE
    Debug Flag: Y
    {TRNS_STATUS=Posted, REPORT_TYPE=Report Only, PERIOD=Sep-05, USER_ID=1318, P_SET_OF_BOOKS_ID=1, P_APPROVED=Not Approved}
    Calling XDO Data Engine...
    java.lang.NullPointerException
         at oracle.apps.xdo.dataengine.DataTemplateParser.getObjectVlaue(DataTemplateParser.java:1424)
         at oracle.apps.xdo.dataengine.DataTemplateParser.replaceSubstituteVariables(DataTemplateParser.java:1226)
         at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:398)
         at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:281)
         at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
         at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
         at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:222)
         at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:334)
         at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
         at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:272)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
    Start of log messages from FND_FILE
    Start of After parameter Report Trigger Execution..
    Gl Set of Books.....P
    Organization NameVision Operations
    Entering TRNS STATUS POSTED****** 648Posted
    end of the trns status..687 Posted
    currency_code 20USD
    P_PRECISION 272
    precision 332
    GL NAME 40Vision Operations (USA)
    Executing the procedure get format ..
    ExecutED the procedure get format and the Result..
    End of Before Report Execution..
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 2865643 on node AP615CMR at 28-SEP-2006 07:58:26.
    Post-processing of request 2865643 failed at 28-SEP-2006 07:58:38 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 28-SEP-2006 07:58:38
    Thanks & Regards
    Suresh Singh

    Generally the DBAs are aware of the OPP service log. They can tell you the cause of the problem.
    Anyway, how did you resolve the issue?

  • Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

    I have searched the internet and this forum and have not found an answer...
    I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005.  I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'.  I attempt to run the following script:
    exec sp_attach_db @dbname = N'AdventureWorks',
    @filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
    @filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
    The error message I get back is:
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
    The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write.  I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist!  They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
    What do I have to do to install the AdventureWorkds database????

    Hello,
    To try to help you, please, could you give some more informations ?
    - the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
    - usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
    - could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
    - have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
    If no, download it and use it to attach
    in the object explorer,
    click on your instance to expand it
    right click on databases
    in the contextual menu, click on attach
    in the new form,click on add
    you arrive on a second form : find your file , click on it, and OK
    it's the simplest way to attach ( the sp_-attach_db is complicated to type )
    the error messages are sometimes more clear in SSMSEE than in Sqlcmd
    Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
    NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
    We are waiting for your feedback to try to help you more efficiently
    Have a nice day

  • Request Error - The server encountered an error processing the request. The exception message is 'Unable to retrieve the requesting user's identity

    I'm trying to create an Orchestrator Connector in Service manager, It is not going well.
    The most resent alarm is
          <p class="heading1">Request Error</p>
          <p>The server encountered an error processing the request. The exception message is 'Unable to retrieve the requesting user's identity.'
       For the Orchestrator Web Service URL: I have http://Server_Name:81/Orchestrator2012/Orchestrator.svc/
    I created a new Run As account that uses Windows authentication, when I test the connection thats the alarm I get.
    Paul Arbogast

    Hi,
    Can you access the URL using a browser? Does it work with the credentials used for the RunAs account?
    Strange error message though - are the account you are running the console with, present in the SCSM CMDB?
    Regards
    //Anders
    Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

  • Error in Opening Worklist -"Unable to perform the request.............."

    Hi,
    On clicking on Worklist in portal, a user is getting the following error:
    "Unable to perform the request. Try again. If the problem persists, inform your system administrator" error .
    Any pointers will be of great help.
    Please let me know how should I go about to solve this problem

    You see this error in a lot of situations. Where exactly is this issue happening ? (clicking on item or clicking on attachment....)
    Check the UWL log and post more details. You may choose to increase the log severity to ALL.
    1. You may try to assign the user more authorizations and check if it fixes the issue.
    2. Make sure that the work item is still valid in the corresponding backend system.
    3. Based on your UWLJWF version - check for available SAP Notes
    4. If you have not already implemented, try to implement sapnote_0001133821 - UWL Destination Service Configuration
    5. Make sure that the user id validity is far enough in the future in the backend system
    6. Upgrade to the latest support pack
    Thanks,
    Shanti

  • The server was unable to process the request due to an internal error.

             
    Properties set in my project are below
    namespace EmployeeService
            public class Employee
                private int _Id;
                private string _Name;
                private string _Gender;
                private DateTime _DateofBirth;
                public int Id
                    get { return _Id; }
                    set { _Id = value; }
                public string Name
                    set { _Name = value; }
                    get { return _Name; }
                public string Gender
                    set { _Gender = value; }
                    get { return _Gender; }
                public DateTime DateofBirth
                    set { _DateofBirth = value; }
                    get { return _DateofBirth; }
    This is the service i have developed in my project 
    namespace EmployeeService
        // NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
        public class EmployeeService : IEmployeeService
            public Employee GetEmployee(int Id)
                Employee objemp = new Employee();
                string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
                using (SqlConnection con = new SqlConnection(cs))
                    SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
                    cmd.CommandType = CommandType.StoredProcedure;
                    SqlParameter Idparameter = new SqlParameter();
                    Idparameter.ParameterName = "@Id";
                    Idparameter.Value = Id;
                    cmd.Parameters.Add(Idparameter);
                    con.Open();
                    SqlDataReader dr = cmd.ExecuteReader();
                    while (dr.Read())
                        objemp.Id = Convert.ToInt32(dr["Id"]);
                        objemp.Name = dr["Name"].ToString();
                        objemp.Gender = dr["Gender"].ToString();
                        objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
                return objemp;
            public void SaveEmployee(Employee objemp)
                string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
                using (SqlConnection con = new SqlConnection(cs))
                    SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
                    cmd.CommandType = CommandType.StoredProcedure;
                    SqlParameter ParameterId = new SqlParameter()
                        Value = objemp.Id,
                        ParameterName = "@Id"
                    cmd.Parameters.Add(ParameterId);
                    SqlParameter ParameterName = new SqlParameter()
                        Value = objemp.Name,
                        ParameterName = "@Name"
                    cmd.Parameters.Add(ParameterName);
                    SqlParameter ParameterGender = new SqlParameter()
                        Value = objemp.Gender,
                        ParameterName = "@Gender"
                    cmd.Parameters.Add(ParameterGender);
                    SqlParameter ParameterDateofBirth = new SqlParameter()
                        Value = objemp.DateofBirth,
                        ParameterName = "@DateofBirth"
                    cmd.Parameters.Add(ParameterDateofBirth);
                    con.Open();
                    cmd.ExecuteNonQuery();
    The Service Contract  code is
    namespace EmployeeService
        // NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
        [ServiceContract]
        public interface IEmployeeService
            [OperationContract]
            Employee GetEmployee(int Id);
            [OperationContract]
            void SaveEmployee(Employee objemp); 
            // TODO: Add your service operations here
        // Use a data contract as illustrated in the sample below to add composite types to service operations
    and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
     protected void btnsave_Click(object sender, EventArgs e)
                EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
                EmployeeService.Employee employee = new EmployeeService.Employee();
                employee.Id = Convert.ToInt32(txtid.Text);
                employee.Name = txtname.Text;
                employee.Gender = txtgender.Text;
                employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
                client.SaveEmployee(employee);
            protected void btnget_Click(object sender, EventArgs e)
                EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
                EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
                txtname.Text = employee.Name;
                txtgender.Text = employee.Gender;
                txtdob.Text = employee.DateofBirth.ToShortDateString();
    and  when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error 
    The server was unable to process the request due to an internal error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
    on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
    Code in web.config file in Webapplication(Client) is the following
    <?xml version="1.0"?>
    <!--
      For more information on how to configure your ASP.NET application, please visit
      http://go.microsoft.com/fwlink/?LinkId=169433
      -->
    <configuration>
        <system.diagnostics>
            <sources>
                <source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
                    <listeners>
                        <add type="System.Diagnostics.DefaultTraceListener" name="Default">
                            <filter type="" />
                        </add>
                        <add name="ServiceModelMessageLoggingListener">
                            <filter type="" />
                        </add>
                    </listeners>
                </source>
                <source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
                    propagateActivity="true">
                    <listeners>
                        <add type="System.Diagnostics.DefaultTraceListener" name="Default">
                            <filter type="" />
                        </add>
                        <add name="ServiceModelTraceListener">
                            <filter type="" />
                        </add>
                    </listeners>
                </source>
            </sources>
            <sharedListeners>
                <add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
                    type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
                    name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
                    <filter type="" />
                </add>
                <add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
                    type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
                    name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
                    <filter type="" />
                </add>
            </sharedListeners>
            <trace autoflush="true" />
        </system.diagnostics>
        <system.web>
            <compilation debug="true" targetFramework="4.0" />
        </system.web>
        <system.serviceModel>
            <diagnostics>
                <messageLogging logEntireMessage="true" logMalformedMessages="true"
                    logMessagesAtTransportLevel="true" />
            </diagnostics>
            <bindings>
                <basicHttpBinding>
                    <binding name="basicHttpBinding" />
                </basicHttpBinding>
                <wsHttpBinding>
                    <binding name="mexHttpBinding">
                        <security mode="None" />
                    </binding>
                </wsHttpBinding>
            </bindings>
            <client>
                <endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
                    binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
                    contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
                <endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
                    binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
                    contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
            </client>
        </system.serviceModel>
    </configuration>
    Things i have tried till now are 
    1)changed the name of the name of the endpoint address basicHttpBinding to  basicHttpBinding_IEmployeeService but still get the save error.
    2)Opened the Message Log Trace. Got the error as follows
    <MessageLogTraceRecord>
    <HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
    <StatusCode>InternalServerError</StatusCode>
    <StatusDescription>Internal Server Error</StatusDescription>
    <WebHeaders>
    <Content-Length>730</Content-Length>
    <Cache-Control>private</Cache-Control>
    <Content-Type>text/xml; charset=utf-8</Content-Type>
    <Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
    <Server>Microsoft-IIS/7.5</Server>
    <X-AspNet-Version>4.0.30319</X-AspNet-Version>
    <X-Powered-By>ASP.NET</X-Powered-By>
    </WebHeaders>
    </HttpResponse>
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
    <s:Header></s:Header>
    <s:Body>
    <s:Fault>
    <faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
    <faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
    or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
    </s:Fault>
    </s:Body>
    </s:Envelope>
    </MessageLogTraceRecord>
    Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
    Thanks in advance
    Regards
    rax227 
                           

    Hi Mohan,
    I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
    I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
    I see the fault response in event log.
    You can see
    this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
    like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too. 
    Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
    If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

  • Unable to perform the request error while selecting completed tasks in UWL

    Hi,
    When user is selecting the Completed Task in the UWL, the below error is displaying
    error: Unable to perform the request. Try again and if the problem persists, inform your system administrator.
    While selecting completed tasks in the drop down, it is showing "Completed Tasks(30)". But after selecting "Completed Tasks(30)" from the drop down, the above error message is getting.
    How can we resolve this??
    Note: We are using EP 7.0 SP 17. When I checked in sdn, I found that there is a problem with completed tasks earlier to sp14. But in SP14, this issue was fixed. But why we are facing this issue?
    Thanks,
    VV

    Hi,
    Please let us know if you can found any relevant logs on
    1) dafault.trc file
    <Drive>:\usr\sap\<sys-id>\JC<inst-no>\j2ee\cluster\server0\log\
    2) UWL logs:
    usr\sap\<version>\JC00\j2ee\cluster\server0\log\applications\sap.com\u
    wl
    Also Have a look on note 1120556.
    Please remember to evaluate the replays, this incentive the SDN to keep growing,
    regards,
    Fabio

  • Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    hi,
    am running the below command for moving sql serevr mdf and ldf files  from one  drive to another : c  drive to d drive:
    but am getting the below error
    SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
    use master
    DECLARE @DBName nvarchar(50)
    SET @DBName = 'CMP_143'
    DECLARE @RC int
    EXEC @RC = sp_detach_db @DBName
    DECLARE @NewPath nvarchar(1000)
    --SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
    SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
    DECLARE @OldPath nvarchar(1000)
    SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
    DECLARE @DBFileName nvarchar(100)
    SET @DBFileName = @DBName + '.mdf';
    DECLARE @LogFileName nvarchar(100)
    SET @LogFileName = @DBName + '_log.ldf';
    DECLARE @SRCData nvarchar(1000)
    SET @SRCData = @OldPath + @DBFileName;
    DECLARE @SRCLog nvarchar(1000)
    SET @SRCLog = @OldPath + @LogFileName;
    DECLARE @DESTData nvarchar(1000)
    SET @DESTData = @NewPath + @DBFileName;
    DECLARE @DESTLog nvarchar(1000)
    SET @DESTLog = @NewPath + @LogFileName;
    DECLARE @FILEPATH nvarchar(1000);
    DECLARE @LOGPATH nvarchar(1000);
    SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
    SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
    exec xp_cmdshell @FILEPATH;
    exec xp_cmdshell @LOGPATH;
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    go
    can anyone pls help how to set the db offline. currently  i  stopped the sql server services from services.msc and started the  sql server agent.
    should i stop both services for moving from one drive to another?
    note: I tried teh below solution but this didint work:
    ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
    Update:
    now am getting the message :
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    (3 row(s) affected)
    (3 row(s) affected)
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    First you should have checked the database mdf/ldf name and location by using the command
    Use CMP_143
    Go
    Sp_helpfile
    Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
    Database is already detached that’s why db offline failed
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    Attached step is failing as there is no mdf file
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
    Solution:
    Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

  • I recently upgraded computer to windows 7.  When I open itunes I am able to see my music library, but unable to play.  Gives an error message of "Could not be found".  How do I retrieve my library contents?

    I recently upgraded computer to Windows 7.  When I open itunes I am able to see my music library, but unable to play.  Gives an error message of "Could not be found".  How do I retrieve my library contents?

    Hello ehoff5,
    I would be concerned too if I was not able to play my music in iTunes.  It sounds like the music files may be in a location that iTunes is not expecting.  I recommend reviewing the following articles to locate you music files on your computer:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

    Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • Error: 'Unable to send the request.  Verify the URL ... is valid and the...

    Hello,
    I'm attempting to connect to Essbase from Visual Studio 2005 with the use of the DataServer component.
    I'm using a URL;
    http://<myserver>:13080/aps/APS
    This URL seems to be valid if I plug it into a browser in that it returns a page listing the following information;
    Hyperion Provider Services
    Hyperion Provider Services - Release 9.3.1.0.0 Build 168
    ESS_ES_HOME: C:\Hyperion\AnalyticProviderServices
    domain file: C:\Hyperion\AnalyticProviderServices/data/domain.db
    essbase.properties: C:\Hyperion\AnalyticProviderServices/bin/essbase.properties
    log console enabled: false
    log file enabled: true
    log level: WARN
    log file name: C:/Hyperion/AnalyticProviderServices/bin/apsserver.log
    is trace enabled: false
    However, if I try and use this same URL in the DataServer component (using the 'Sign On' task) I'm shown the following error;
    'Unable to send the request. Verify the URL "http://<myserver>:13080/aps/APS" is valid and the servlet is running'
    So, any suggestions are much appreciated!
    Many thanks.

    Hi John,
    Yes, you're right. I've now installed the habnet server on the machine hosting Essbase and can access it via browser using;
    http://<myserver>::22080/EssbaseObjects/Servlet
    and this seems to be showing signs of life as it returns the following to the browser;
    =============================================================================
    Hyperion Habnet Servlet, Release 9.2.0
    Copyright 1997-1998, 2001-2006 Hyperion Solutions Corporation. All rights reserved.
    Hyperion Essbase Java API version 9.0.2
    Configuration:
    printXML=false
    printRequests=false
    connectionTimeout=300000
    checkInterval=60000
    forceMetadataCaching=false
    cacheTimeout=300000
    cacheInterval=60000
    EDSUrl=http://localhost:11080/eds/EssbaseEnterprise (optional)
    defaultEDSServer=localhost
    defaultDomain=Essbase
    defaultORBType=URL
    defaultPort=8080
    defaultUseConnectionPool=false
    defaultConnectionPerOperation=false
    defaultUseCluster=false
    defaultConnectionReadOnly=false
    netRetryCount=20
    netRetryInterval=1000
    testing configuration of required Java libraries:
    Essbase Java API (ess_japi.jar) *** OLDER VERSION ***
    Essbase Java API version detected - 9.0.0
    Java memory configuration:
    Maximum: 63 (Mb)
    Allocated: 31 (Mb)
    Free: 28 (Mb)
    XML (xerces.jar) is subject to:
    Apache Software License, Version 1.1
    Copyright (c) 1999-2001.
    The Apache Software Foundation.
    All rights reserved.
    SOAP (soap.jar) is subject to:
    Apache Software License, Version 2.0
    Copyright (c) 1999-2004.
    The Apache Software Foundation.
    All rights reserved.
    =============================================================================
    However.... when I try to connect using the DataServer I'm shown the same error message as beofre except for the change of URL. Can you remember if there were any other settings that needed to be made?
    I've also noticed the line above ' EDSUrl=http://localhost:11080/eds/EssbaseEnterprise (optional) ', this says 'the page cannot be displayed' if i try to access it from the habnet machine but I'm really not sure if this is relevant or not.
    Many thanks again for your time.
    Steve

Maybe you are looking for