Unable to pass flashvars in application url in Flex 4.5.

I am creating an application in which I have to pass variable in application URL like http://localhost/Test/test.html?name=testUser
It works fine in flex 3.5 and can be read using Application.application.parameters['name']. But with flex 4.5 it is not detected unless declared in html wrapper.
Problem is, since requirement changes dynamically so somehow its not possible to determine all parameters user want to use so can't be declared in html wrapper.
Is there any work around for reading flashVars directly from application URL ? how about using browserManager's fragments for solving this problem??

Similar Messages

Make Firefox open URLs passed from external applications in new tabs

I upgraded Firefox (Mac) from 3.6.13 to 3.6.14 yesterday.
Since then Firefox does not respond to URLs passed from external applications, as it has always done.
The external apps pass the URL, FireFox is brought to the front, but no Tab (or new window) is opened.
Nothing else has changed. Firefox is selected as my default browser (in Safari Prefs) and there is only one copy of FireFox on my laptop,

Hi David
Go to Safari Preferences>General. At the bottom you'll see an option for opening in a tab. Makes sure Tabs are enabled in your Tab panel.

Pass flashvars to swf in swf?

I am loading a child swf inside a parent swf, and need to pass variables from the parent into the child. I don't have control over the source code of the child, so I can't have the child pull data from the parent; the data needs to be passed to the child swf in a standard fashion, so that the child works just as if it were embedded in a page using flashvars.
I've tried passing variables to the child as parameters on the URL:
var ldr:Loader = new Loader();
var urlReq:URLRequest = new URLRequest("http://mysite.com/child.swf?var1=aaa&var2=bbb");
ldr.load(urlReq);
addChild(ldr);
This seems to work ok, but apparently Internet Explorer doesn't allow URLs longer than 2083 characters (http://support.microsoft.com/kb/208427). I need to pass a fairly long string of parameters to the child which will likely exceed 2083 characters. So I'm trying to avoid passing the parameters directly on the URL, and wondering if there is any other way to populate the child swf with the variables that it will expect. Is there any other way of passing flashvars to a swf-in-swf?
Thanks,
Dave

Craig,
Thanks for the reply. I've tried this too but unfortunately, passing the data using URLVariables has the same limitation in IE.
var ldr:Loader = new Loader();
var urlReq:URLRequest = new URLRequest("http://mysite.com/child.swf");
var variables:URLVariables = new URLVariables();
variables.var1="aaa";
urlReq.data = variables;
ldr.load(urlReq);
addChild(ldr);
This still results in a request being made to http://mysite.com/child.swf?var1=aaa, since it's using HTTP GET. If the entire URL (including the query string) is longer than 2083 characters, IE is unable to load the URL.
Any way around this?
Thanks,
Dave

Pass flashvars to an AIR app?

I'm converting a Flex app to an AIR app.
The current flex app uses the SWFObject inthe html template
to pass in flashvars...
var so = new SWFObject("myappp.swf", "myappp", "${width}",
"${height}", "9.0.115");
so.addVariable("XMLData",
getXML(document.getElementById("MyXMLData")));
so.write();
...where MyXmlData is defined in the html template as
follows....
<div style="display:none;" id="MyXMLData">
<video>
<clip url="rtmp://cpxxx.edgefcs.net/500k/myflv"
hideSkin="false">
</clip>
</video>
</div>
In my ActionScript I get the flashvars as follows...
if (!loaderInfo.parameters.hasOwnProperty("MyXMLData"))
throw("Error: Missing XML Data");
How would I do this with AIR? Is there a way to pass the XML
to the loader when the AIR app is starting up? To put it another
way... How would I pass flashvars to an AIR app?
Thanks!
Chris

It depends on how your application is being launched. If it's
being launched from a web page via the browser API, you can pass
arguments to the launch call. That's not really appropriate for an
entire XML file, but you could pass e.g. a URL to one.
However, if your application is being launched directly by a
user on the desktop, then there's no way to pass arguments to it.
Stepping back a bit, it might be more useful to think about
your use case and how to make it work, rather than focusing
immediately on Flashvars, which is just a feature.
Oliver Goldman | Adobe AIR Engineering

Unable to see the planning applications

Hi All,
I'm using hyperion 11.1.2. I've created a planning application in workspace. Now if i'm using the URL http://localhost:8300/HyperionPlanning, i'm unable to see any planning applications in the drop down ? where as i'm able to access applications in workspace. Do i need to make any settings to see the applications using this URL ? Pls. advice
Thanks,
PVR

As it looks like you only need the default cluster I would start up the configurator, select planning, manage planning clusters.
Choose "Re-Associate Cluster and Application", select default and choose an application, apply, repeat this for all the planning applications.
Choose Activate Cluster, select default.
Then you can delete the cluster that is not needed.
Cheers
John
http://john-goodwin.blogspot.com/

Passing parameters from an URL to a WAD Web Template 7.0

Hi guys, I need to pass parameters from an URL to a web template created with WAD 7.0. We need to open a template with certain filters starting from a link button located on an Xcelsius Dashboard. Our customer wants a web template to be opened with the filters defined within the Xcelsius
The idea is to run the template with the filters defined in the URL. I know this was incredibly easy with WAD 3.x, but I didn't find any suitable solutions to use with WAD 7.0.
What is the easiest way to do this with WAD 7.0?
Thanks in advance and regards.
Fabio Cristi

Hi,
It is possible in 7.0, but unfortunately it is a lot more complicated than i 3.x. There are quite a few examples here:
http://help.sap.com/saphelp_nw70/helpdata/en/43/ef05462480025ae10000000a1553f7/content.htm
I used it in a case where I wanted to embed a Web template in a BPS application and pass characteristic filters from the BPS application to the web template - similar to your requirements. Basically you need the following just to restrict one characteristic :o(
&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1=SELECTION_INPUT_STRING
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=PDS06
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=0D_PH2
I could only get it to work with one characteristic and I suspect, that the reason is that the URL simply gets to long (very quickly). You have to repeat the above for every characterstic you want to use :o(
Hth,
Jacob

Passing Parameters in a URL

Hi,
Does anybody know how/if it's possible to pass parameters into a URL from LOV/comboboxes/tick-boxes etc...
I know this is possible through External Applications for the username and password, but what if the user wants to select multiple departments of a given report?
The idea being, that we are going to be passing parameters into Sales Analyser to fire off a specific report with given values.
These values are restricted, depending on which user you are and your level of access to the portal. This URL will then be used to open an SA report with the details required.
Thanks, Matt.

Hi,
You will have to encode your parameter value. The problem is because of the spaces in the value. Whenever there any special
characters in the value it should be encoded.
example
select '<area shape="rect" coords="335,66,528,83" href="http://townland:7778/pls/portal30/PORTAL30.RPT_SUMKWH.show_parms?meter='||
<portal_schema>.wwutl_htf.url_encode('PMS 11BBA01')||'">pams</a>' url
from meters
The above is just an example. Please change the names to suit your requirements.
Thanks,
Sharmila

Page 404 Error when passing Session values through URL

The current application I'm working on is a 'Targeted Email Communications' application. Bascially, employees at the school at which I'm employed can go in and select services to recieve outage notification emails on.
The problem I'm discussing in this post has to do with our so called 'Notification Summary Screen.' This screen is basically a report region which displays all outage notifications issued by this application. In the left-most column of this report, I have an edit button that when clicked, redirects the user to the 'Create / Update / Send Screen' with the primary key values passed through the URL. When this happens, all other page items query their values based on the NOTIF_ID passed in through the URL. All of this works fine.
The problem is, on the Notification Summary Screen, I also have a button labeled 'Create a new notification.' This button redirects the user to the same page as before, except now all of the values are NULL because this outage notification has not yet been created. The problem is, when I try and do this - I get a page 404 not found error. I'm pretty sure it's because my application is getting confused because earlier all of the values were passed in through a URL. For the 'Create New' button, I clear the page cache for this page - and it still does nothing. I am at a loss for what to do here because I keep getting the error.
Here's the code for the URL button found in the report query in the 'Notification Summary Screen' :
('<a href='
          || 'f?p=&APP_ID.:2:&SESSION.::&DEBUG.::'
          || 'P2_NOTIF_ID,P2_NOTIF_SEQ,P2_INFO_TYPE:'
          || a.notif_id ||','|| b.notif_seq || ',' || 'Update'
          || '>'
          || '<img src="#APP_IMAGES#EditButton.gif" />'
          || '</a>') as "edit",** NOTE, I took out the double quotes after href and before the closing right karat brackets because for some reason the code in the URL wouldn't display...weird.... **
The NOTIF_ID value is the primary key identifier for each outage notification. Additionally, the NOTIF_SEQ value is the sequence number for each (because each notification could have multiple updates). The INFO_TYPE value just references whether this is 'Initial', 'Updated', or 'Closing' information.
Any suggestions would be much appreciated.
Eric
Edited by: user11685190 on Nov 6, 2009 1:12 PM
Edited by: user11685190 on Nov 6, 2009 1:13 PM
Edited by: user11685190 on Nov 6, 2009 1:14 PM

Hey you guys,
Thanks for your responses. I actually just started working for this academic institution, and have to finish a probationary period before I have access to their VPN (5 Months). Therefore, I cannot access my workspace, nor will they allow me to export my application because it's considered their intellectual property. I believe it may be the &DEBUG portion of it.
Though I cannot state the exact URL the error states, I can tell you that if I go into application builder to the page in question and try and run it before the page that links to it, I get the error. However, when I use the link everything works fine. When I use the 'Create New' button to link to the page with no values passed, I get the error again. I work again on Monday and will have more information then.
Thanks again!
Eric

Layer7 application URL monitoring - SCOM 2007R2 possible?

Hello helpers,
I have a request to monitor Layer7 application URLs using SCOM 2007 R2.
Have been working on this case past 6 months, but I am unable to resolve it because health state of the URL monitors are not changing.
URL example: http://ABCDEF.ZYX.HIJKLM.com:8080/ssg/ping
The page just says "OK" and HTTP status code is 200.
Even though we have configured with content text which is not present in the page content, there is no state change happening.
Appreciate your answers on this.
Thanks in Advance,
Dheeraj B.

Hi,
It seems like that you are using web application availability monitoring template to monior URLs. If you want to get state changing when specific criteria is met, make sure you configured it correctly.
In addition, the article below should be helpful for you, please check it:
http://blogs.technet.com/b/momteam/archive/2012/05/31/using-the-web-application-availability-monitoring-to-monitor-web-applications-health.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Passing parameters in FQDN URL of WDA component

hai my dear WDAers,
how can
we pass the parameters from URL and how can we access that paremeter into another view.
regards,
rk

I am not sure what you mean by passing parameters in FQDN URL.
Is this application called from Portal ? Then you can define parameters in the iView application Parameters.
If you call the application using navigation api then there is a importing parameter lt_business_parameter.
You can define also parameters in the application , open the application and right side pane you can define the parameters.
You can read the parameters in on default plug of the window and save it in component controller attribute, you can read them back from any view in your component.
data lt_all_url_param TYPE tihttpnvp.
wdevent->get_data( EXPORTING name = '_ALL_URL_PARAMETERS'
IMPORTING value = lt_all_url_param ).
wd_comp_controller->gt_all_url_param = lt_all_url_param.
Note: Please read the forum rules once, search the forum before starting your post.

How to invoke ADF application URL from OAF?

Hi guru's,
We have a developed a custom ADF application using Fusion Middleware 11g.
We would like to integrate this ADF with existing EBS/OAF application.
We were able to invoke ADF URL from EBS responsibility with a special function type "ADFx" in R12.1.3.
Now we need to pass context/profile level parameters from EBS to external ADF application. Like logged in userId/RespId etc...
We are running ADF application also in same EBS DB and hence want to use same fnd_user/Resp concept in ADF.
Can anyone help me on how to pass these parameters like userId/RespId from EBS to ADF while invoking ADF application URL?
If we can append the values to ADF URL, we would be bale to parse them in ADF context. But, i am stuck at passing parameters from EBS.
How Can we invoke ADF URL from OAF page? is there any specific function available or is it just URL invoke?
Also, in OAF the logged in user session information is maintained in cookies(if i am correct), is there any way that we can pass the session level values from OAF to ADF?
Any help in this regard would be a great help!!!
Thanks

May be the following link will help you ->
http://www.oracle-latest-technology.com/2010/12/how-to-dynamically-open-external-url.html

How to retrieve the protocol (http / https) from WDJ application URL

Hi All,
In my WDJ component, I need to get the ServerName, Port and the protocol (http / https) from the WDJ application URL. I am able to get the server name and the port but unable to get the protocol. Any help would be highly appreciated.
Code I am using is :
String ServerName = WDProtocolAdapter.getProtocolAdapter().getRequestObject().getServerName();
String port = WDProtocolAdapter.getProtocolAdapter().getRequestObject().getServerPort();
Regards,
Srinivas Sistu

Hello,
The interface ServletRequest has the following methods:
getProtocol: Returns the name and version of the protocol the request uses in the form protocol/majorVersion.minorVersion, for example, HTTP/1.1.
getSchema: Returns the name of the scheme used to make this request, for example, http, https, or ftp. Different schemes have different rules for constructing URLs, as noted in RFC 1738.
IWDRequest request = WDProtocolAdapter.getProtocolAdapter().getRequestObject();
HttpServletRequest httpRequest = (HttpServletRequest) WDProtocolAdapter
.getProtocolAdapter().getRequestObject().getProtocolRequest();
String protocol = httpRequest.getScheme();
String url = protocol + "://" + request.getServerName() + ":" + request.getServerPort();
msgManager.reportSuccess(url);
Regards,
Jann Cortés

Passing flashVars with the html-wrapper command

Hi,
Is it possible to pass flashVars when the html template is generated using the html-wrapper task? So that I dont have to edit the html template to add flashVars?
Something like this in the html wrapped swf?
AC_FL_RunContent(
     "src", "TestApp",
     "flashVars", "myName=Danger&myHometown=Los%20Angeles",
     "width", "100%",
     "height", "100%",
     "align", "middle",
     "id", "TestApp",
     "quality", "high",
     "name", "TestApp",
     "allowScriptAccess","sameDomain",
     "type", "application/x-shockwave-flash",
     "pluginspage", "http://www.adobe.com/go/getflashplayer"
The flashVars I want to pass when I run the html-wrapper task.
Thanks
Raghu Jakkula

If this is still an issue please re-post your question To the Business Objects forum or purchase a support case on line and have a dedicated support engineer work with you directly.

Passing flashvars to standalone player

How does one pass flashvars to the standalone player? The
executable doesn't seem to take any arguments, doesn't parse URLs
with variables (e.g. file://movie.swf?var=value), and doesn't make
use of any environment variables I've tried.

Yes this is possible with our Third Party Tool Jugglor.
Read this
http://flashjester.com/index.php?section=faq_search&search=command%20line#250
Jugglor
http://www.jugglor.com
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

Passing FlashVars via SWFLoader

hello!
I want to use SWFLoader to instead of the below code, but I don't know how to set vars and get vars.
Is there any way to pass FlashVars via SWFLoader, and how to get the variable?
Thanks!
AC_FL_RunContent(
"src", "HelloWorld",
"FlashVars", "par1=a&par2=b"
);

I recommend looking at the Cairngorm Task library – http://sourceforge.net/adobe/cairngorm/wiki/CairngormLibraries/#Task – to manage the flow of the tasks you need to perform on start up.
Follow the sample applications and guidelines here for other application structure examples and recommendations.
http://sourceforge.net/adobe/cairngorm/wiki/CairngormGuidelines/

Unable to pass flashvars in application url in Flex 4.5.

Similar Messages

Maybe you are looking for